/*	File: D:\WACKER\tdll\features.h (Created: 24-Aug-1994)
 *
 *	Copyright 1994 by Hilgraeve Inc. -- Monroe, MI
 *	All rights reserved
 *
 *	$Revision: 1.23 $
 *	$Date: 1996/05/30 10:30:37 $
 */


/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 *                           R E A D   M E
 *
 * This file is a replacement for the INC.H file that was used in HAWIN
 * and HA/5.  It controls optional features that may or may not be built
 * into this product.  This file CANNOT have anything except defines in
 * it.  It is for control and configuration only.  Violate this rule at
 * your peril.  (Please ?)
 *
 *=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/

/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 *                           R E A D   M E
 *
 * This file has been organized into sections based on language.  To find
 * which features are enabled search for the language you are building.
 *
 * The following section contains descriptions of the settings currently
 * available for each language.
 *
 * The end of the file contains a series of test to verify that required
 * settings have been set.
 *
 *=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/


#if !defined(FEATURES_H_INCLUDED)
#define	FEATURES_H_INCLUDED


 

#if defined(EXTENDED_FEATURES)
#define INCL_ZMODEM_CRASH_RECOVERY
#define INCL_REDIAL_ON_BUSY
#define INCL_USE_TERMINAL_FONT
#define INCL_SPINNING_GLOBE
#define INCL_PRIVATE_EDITION_BANNER
#define INCL_WINSOCK
#endif

#if defined(NT_EDITION)
#define INCL_ZMODEM_CRASH_RECOVERY
#define INCL_REDIAL_ON_BUSY
// #define INCL_USE_TERMINAL_FONT - mrw:3/11/96
#define INCL_SPINNING_GLOBE
#define INCL_PRIVATE_EDITION_BANNER 
#define INCL_NT_ENUM_PORTS
// #define INCL_WINSOCK - mrw:2/29/96
#endif


/*
 * Minitel and Prestel terminals are now included standard
 */
#define INCL_MINITEL
#define INCL_VIEWDATA

/*
 * This feature is used in the FAR EAST version.  It provides code to
 * support an optional character translation DLL.  This DLL is called to
 * translate the data stream on both input and output.  It does not
 * translate the underlying character values (at the present time), only
 * the encoding method.  The initial version of this will only translate
 * between JIS and Shift-JIS.  For commercial release, additional operations
 * such as JIS escape recovery, UNICODE, and EUC encoding can be added just
 * by changing the DLL.  In fact, the new DLL can be offered as an upgrade
 * to the lower version of the product.
 *
 * #define CHARACTER_TRANSLATION
 */

/*
 * These next feature sets are used to control the character width that we
 * are compiling for.  There are 3 disjoint choices.  Only one can be selected.
 * One MUST be selected.  We will have code in here to cause noise if none or
 * more than one is selected.
 *
 * The 3 choices are:
 *
 *	CHAR_NARROW
 *	This is what we use for the U.S. and European versions.  It means all
 *	characters are a single "byte" and each one takes up 8 bits.
 *
 *	CHAR_WIDE
 *	This is what we will use for the UNICODE version if and when it ever
 *	decides to become an option.  It means that all characters are a single
 *	"byte" and each one takes up 16 (for now) bits.
 *
 *	CHAR_MIXED
 *	This is what we use for the FAR EAST (DBCS) version.  It means that the
 *	characters may take up one or two  "bytes" and each one takes up
 *	8 or 16 bits.
 * #define  CHAR_NARROW
 * #define  CHAR_WIDE
 * #define  CHAR_MIXED
 */

#if defined(USA)
    #define  CHAR_NARROW

#elif defined(JAPANESE)
	#define FAR_EAST
	#define INCL_VT100J
	#define INCL_ANSIW
    #define CHAR_MIXED
    #define CHARACTER_TRANSLATION

#endif

/* ************* THIS SECTION MUST BE AT THE END OF THE FILE*************
 *
 * It tests to see if required settings have been set for the current build
 *
 */

#if !defined(CHAR_NARROW) && !defined(CHAR_WIDE) && !defined(CHAR_MIXED)
#error	Remember, one of these must be defined.
#endif

#if defined(CHAR_NARROW) && defined(CHAR_WIDE)
#error	Remember, only one of these can be defined.
#endif

#if defined(CHAR_NARROW) && defined(CHAR_MIXED)
#error	Remember, only one of these can be defined.
#endif

#if defined(CHAR_WIDE) && defined(CHAR_MIXED)
#error	Remember, only one of these can be defined.
#endif

#endif