/* File: D:\WACKER\term\term.rc (Created: 26-Nov-1993) * * Copyright 1994 by Hilgraeve Inc. -- Monroe, MI * All rights reserved * * $Revision: 1.194 $ * $Date: 1996/08/02 13:35:19 $ */ #include #include #include #include #include "res.h" #include #include "xfer_dlg.h" #include "version.h" #include //#include DEADWOOD:mcc // RC complier needs a response file option. // #define INCL_VIEWDATA #define INCL_MINITEL #ifdef FAR_EAST #define INCL_VT100J #endif #if defined(EXTENDED_FEATURES) #define INCL_USE_TERMINAL_FONT #define INCL_REDIAL_ON_BUSY #define INCL_SPINNING_GLOBE #define INCL_PRIVATE_EDITION_BANNER #endif #if defined(NT_EDITION) // #define INCL_USE_TERMINAL_FONT - mrw:3/11/96 #define INCL_REDIAL_ON_BUSY #define INCL_SPINNING_GLOBE #endif //#define TESTMENU MAINMENU MENU DISCARDABLE BEGIN POPUP "&File" BEGIN MENUITEM "&New Connection", IDM_NEW MENUITEM "&Open...", IDM_OPEN MENUITEM "&Save", IDM_SAVE MENUITEM "Save &As...", IDM_SAVE_AS MENUITEM SEPARATOR MENUITEM "Page Set&up...", IDM_PAGESETUP MENUITEM "&Print...", IDM_PRINT MENUITEM SEPARATOR MENUITEM "P&roperties", IDM_PROPERTIES MENUITEM SEPARATOR MENUITEM "E&xit\tAlt+F4", IDM_EXIT END POPUP "&Edit" BEGIN MENUITEM "&Copy\tCtrl+C", IDM_COPY, GRAYED MENUITEM "&Paste to Host\tCtrl+V", IDM_PASTE, GRAYED MENUITEM SEPARATOR MENUITEM "&Select All", IDM_SELECT_ALL END POPUP "&View" BEGIN MENUITEM "&Tool Bar", IDM_VIEW_TOOLBAR MENUITEM "&Status Bar", IDM_VIEW_STATUS MENUITEM SEPARATOR MENUITEM "&Font...", IDM_VIEW_FONTS MENUITEM SEPARATOR MENUITEM "Sna&p", IDM_VIEW_SNAP END POPUP "&Call" BEGIN MENUITEM "&Connect", IDM_ACTIONS_DIAL MENUITEM "&Disconnect", IDM_ACTIONS_HANGUP END POPUP "&Transfer" BEGIN MENUITEM "&Send File...", IDM_ACTIONS_SEND MENUITEM "&Receive File...", IDM_ACTIONS_RCV MENUITEM "&Capture File...", IDM_ACTIONS_CAP MENUITEM "Send &Text File...", IDM_ACTIONS_SEND_TEXT MENUITEM SEPARATOR MENUITEM "Capture to &Printer", IDM_ACTIONS_PRINT END POPUP "&Help" BEGIN MENUITEM "&Help Topics", IDM_HELPTOPICS MENUITEM SEPARATOR MENUITEM "&About HyperTerminal", IDM_ABOUT END #if defined(TESTMENU) && !defined(NDEBUG) POPUP "&Test" BEGIN MENUITEM "Save &As...", IDM_TEST_SAVEAS, MENUITEM "Connect", IDM_TEST_CONNECT, MENUITEM "Disconnect", IDM_TEST_DISCONNECT, MENUITEM SEPARATOR MENUITEM "Clear T&erminal", IDM_TEST_CLEARTERM, MENUITEM "Clear B&ackscroll", IDM_TEST_CLEARBACK, GRAYED MENUITEM SEPARATOR MENUITEM "Select &Terminal", IDM_TEST_SELECTTERM, GRAYED MENUITEM "Select &Backscroll", IDM_TEST_SELECTBACK, GRAYED MENUITEM SEPARATOR MENUITEM "&Test File..." IDM_TEST_TESTFILE MENUITEM SEPARATOR MENUITEM "&Bezel", IDM_TEST_BEZEL MENUITEM "S&nap", IDM_TEST_SNAP MENUITEM SEPARATOR MENUITEM "&Show Tips", IDM_TEST_SHOWTIPS, GRAYED MENUITEM SEPARATOR MENUITEM "New Connection...", IDM_TEST_NEW_CONNECTION MENUITEM "Flush backscroll", IDM_TEST_FLUSH_BACKSCRL MENUITEM SEPARATOR POPUP "&Load emulator..." BEGIN MENUITEM "Ansi", IDM_TEST_LOAD_ANSI MENUITEM "Auto", IDM_TEST_LOAD_AUTO MENUITEM "Minitel", IDM_TEST_LOAD_MINITEL MENUITEM "TTY", IDM_TEST_LOAD_TTY MENUITEM "Viewdata", IDM_TEST_LOAD_VIEWDATA MENUITEM "VT52", IDM_TEST_LOAD_VT52 MENUITEM "VT100", IDM_TEST_LOAD_VT100 END MENUITEM SEPARATOR MENUITEM "Query Session Name", IDM_TEST_SESSNAME END #endif END MENUCAPTURE MENU DISCARDABLE BEGIN MENUITEM "&Stop", IDM_CAPTURE_STOP MENUITEM "&Pause", IDM_CAPTURE_PAUSE MENUITEM "&Resume", IDM_CAPTURE_RESUME END PRINTCAPTURE MENU DISCARDABLE BEGIN MENUITEM "&Stop", IDM_PRNECHO_STOP MENUITEM "&Pause", IDM_PRNECHO_PAUSE MENUITEM "&Resume", IDM_PRNECHO_RESUME END SESSIONCONTEXTMENU MENU DISCARDABLE BEGIN POPUP "Dummy popup" BEGIN MENUITEM "Send File...", IDM_CONTEXT_SEND MENUITEM "Receive File...", IDM_CONTEXT_RECEIVE MENUITEM "Print...", IDM_CONTEXT_PRINT MENUITEM SEPARATOR MENUITEM "Copy\tCtrl+C", IDM_CONTEXT_COPY, GRAYED MENUITEM "Paste to Host\tCtrl+V", IDM_CONTEXT_PASTE, GRAYED MENUITEM SEPARATOR MENUITEM "Select All", IDM_CONTEXT_SELECT_ALL MENUITEM SEPARATOR MENUITEM "Snap", IDM_CONTEXT_SNAP /* MENUITEM SEPARATOR MENUITEM "What's This?", IDM_CONTEXT_WHATS_THIS */ END END /* ---------------------------------------------------------------------- */ #include "dialogs.rc" /* ---------------------------------------------------------------------- */ /* For upper-WACKER the emulator dialogs will be bound with the emu DLL. */ #include "emu\emudlgs.rc" /* ---------------------------------------------------------------------- */ #include "tables.rc" /* ---------------------------------------------------------------------- */ STRINGTABLE DISCARDABLE BEGIN IDS_GNRL_APPNAME "HyperTerminal" IDS_GNRL_AUTHOR "Developed for Microsoft\nby Hilgraeve, Incorporated" IDS_GNRL_HELPFILE "HYPERTRM.HLP" IDS_GNRL_PRSHT_TITLE "Properties for " IDS_GNRL_NEW_CNCT "New Connection" IDS_GNRL_HAS ".ht" #if defined(NT_EDITION) //jmh: 8/2/96 IDS_GNRL_PROFILE_DIR "\\start menu\\programs\\accessories\\hyperterminal\\" #endif // defined(NT_EDITION) /* General confirmation messages */ IDS_GNRL_CNFRM_SAVE "Do you want to save session %s ?" IDS_GNRL_CNFRM_OVER "%s file already exists.\rDo you want to replace the existing file?" IDS_GNRL_CNFRM_DCNCT "You are currently connected.\rAre you sure you want to disconnect now?" IDS_GNRL_ELLIPSIS " ... " IDS_GNRL_CREATE_PATH "The path '%s' does not exist. Create it?" IDS_GNRL_INVALID_CHARS "A connection name cannot contain any of the following characters: /\\:*?\x22<>|" IDS_GNRL_INVALID_NAME "The connection name is a reserved device name.\nUse a different connection name." END STRINGTABLE DISCARDABLE BEGIN IDS_CMM_ALL_FILES1 "All Files (*.*)" IDS_CMM_ALL_FILES2 "*.*" IDS_CMM_SEL_FILES "Select File" IDS_CMM_SEL_DIR "Select a Folder" IDS_CMM_SAVE_AS "Save As..." IDS_CMM_LOAD_SESS "Open" IDS_CMM_HAS_FILES1 "Session files (*.ht)" IDS_CMM_HAS_FILES2 "*.ht" IDS_CMM_HAS_FILES3 "Terminal files (*.trm)" IDS_CMM_HAS_FILES4 "*.trm" END STRINGTABLE DISCARDABLE BEGIN IDS_SND_DLG_DD "You can also drag files from a folder and drop them in the list box." IDS_SND_DLG_FILE "Select File to Send" IDS_SND_TXT_FILE "Send Text File" END STRINGTABLE DISCARDABLE BEGIN /* Messages for one of the receive dialogs */ IDS_RM_APPEND "If more than one file is received, subsequent files will be appended to this file." IDS_RM_OVERWRITE "If more than one file is received, subsequent files will overwrite this file." IDS_RM_REFUSE "If more than one file is received, subsequent files will be refused." IDS_RM_NEWER "If more than one file is received, subsequent files will be refused unless they are newer." IDS_RM_DATE "If more than one file is received, subsequent files will be renamed by differences in the date." IDS_RM_SEQUENCE "If more than one file is received, subsequent files will be renamed by differences in the file name." END STRINGTABLE DISCARDABLE BEGIN IDS_CPF_DLG_FILE "Select Capture File" IDS_CPF_FILES1 "Text file (*.TXT)" IDS_CPF_FILES2 "*.TXT" IDS_CPF_SELECT_FILE "Select File" IDS_CPF_FILES3 "All files (*.*)" IDS_CPF_FILES4 "*.*" IDS_CPF_CAP_OFF "&Capture Text..." IDS_CPF_CAP_ON "&Capture Text" IDS_CPF_CAP_FILE "CAPTURE.TXT" END STRINGTABLE DISCARDABLE BEGIN IDS_XD_RECEIVE "Receiving Files" IDS_XD_SEND "Sending Files" IDS_XD_ON "On" IDS_XD_OFF "Off" IDS_XD_CRC "CRC" IDS_XD_CHECK "Checksum" IDS_XD_STREAM "Streaming" IDS_XD_CB "Classic B" IDS_XD_BP "B Plus" IDS_XD_INT "%d" IDS_XD_ONLY_1 "%1!d!" IDS_XD_I_OF_I "%1!d! of %2!d!" IDS_XD_KILO "%dK" IDS_XD_K_OF_K "%1k of %2K" IDS_XD_BPS "%d bps" IDS_XD_CPS "%d cps" IDS_XD_PERCENT "%d%%" IDS_XD_RECV_TITLE "%1 file receive for %2" IDS_XD_SEND_TITLE "%1 file send for %2" END STRINGTABLE DISCARDABLE BEGIN IDS_XD_PROTO_X_1 "1K Xmodem" IDS_XD_PROTO_X "Xmodem" IDS_XD_PROTO_Y "Ymodem" IDS_XD_PROTO_Y_G "Ymodem-G" IDS_XD_PROTO_Z "Zmodem" IDS_XD_PROTO_K "Kermit" IDS_XD_PROTO_Z_CR "Zmodem with Crash Recovery" END STRINGTABLE DISCARDABLE BEGIN /* Transfer status messages, displayed at end of transfer */ IDS_MB_TITLE_WARN "HyperTerminal" IDS_MB_TITLE_ERR "HyperTerminal" IDS_MB_MSG_NO_FILE "HyperTerminal couldn't find the file: " IDS_ER_TAPI_INIFILE "TAPI.DLL cannot read TELEPHON.INI. Edit the file and then try again." IDS_ER_TAPI_NODRIVER "Windows could not find the Telephony device driver or one of its component files. Use the Telephony control panel to find or reinstall the driver." IDS_ER_TAPI_NOMULTI "A duplicate service provider exists in the TELEPHON.INI file. Use the Telephony Control Panel to correct the problem." END STRINGTABLE DISCARDABLE BEGIN /* A block of ZMODEM dialog text strings */ IDS_TM_SD_ONE "" IDS_TM_SD_TWO "Newer or longer" IDS_TM_SD_THREE "CRC differs" IDS_TM_SD_FOUR "Append to file" IDS_TM_SD_FIVE "Overwrite" IDS_TM_SD_SIX "Newer" IDS_TM_SD_SEVEN "Length or date differs" IDS_TM_SD_EIGHT "Refuse" END STRINGTABLE DISCARDABLE BEGIN IDS_TM_XFER_ZERO "Transfer successful" IDS_TM_XFER_ONE "Transfer cancelled by remote system" IDS_TM_XFER_TWO "Transfer cancelled by user" IDS_TM_XFER_THREE "Carrier lost" IDS_TM_XFER_FOUR "Error limit exceeded" IDS_TM_XFER_FIVE "No response from remote system" IDS_TM_XFER_SIX "Packet sequence error" IDS_TM_XFER_SEVEN "Illegal message format" IDS_TM_XFER_EIGHT "Too many errors" IDS_TM_XFER_NINE "Cannot write file to disk" IDS_TM_XFER_TEN "Cannot open file" IDS_TM_XFER_ELEVEN "Disk error" IDS_TM_XFER_TWELVE "Not enough memory" IDS_TM_XFER_THIRTEEN "File exists but cannot be opened" IDS_TM_XFER_FOURTEEN "Transfer complete" IDS_TM_XFER_FIFTEEN, "" IDS_TM_XFER_SIXTEEN "File is too old" IDS_TM_XFER_SEVENTEEN "No file time available" IDS_TM_XFER_EIGHTEEN "Would not cancel" IDS_TM_XFER_NINETEEN "General failure" IDS_TM_XFER_TWENTY "No virus scanning" IDS_TM_XFER_TWENTYONE "Virus detected" IDS_TM_XFER_TWENTYTWO "User skipped" IDS_TM_XFER_TWENTYTHREE "User refused" IDS_TM_XFER_TWENTYFOUR "This file cannot be transferred, because an identically named file exists which cannot be renamed at this time. The existing file may be in use or write protected." END STRINGTABLE DISCARDABLE BEGIN /* A block of ZMODEM display messages, more blocks will follow */ IDS_TM_SZ_ZERO, "" IDS_TM_SZ_ONE "Carrier lost" IDS_TM_SZ_TWO "Connection timed out" IDS_TM_SZ_THREE "Bad data packet" IDS_TM_SZ_FOUR "Waiting for start request" IDS_TM_SZ_FIVE "Requesting start packet" IDS_TM_SZ_SIX "Got start request" IDS_TM_SZ_SEVEN "Got acknowledgement" IDS_TM_SZ_EIGHT "Got start request" IDS_TM_SZ_NINE "File refused" IDS_TM_SZ_TEN "Remote error" IDS_TM_SZ_ELEVEN "Transfer canceled by remote user" IDS_TM_SZ_TWELVE "Finished" IDS_TM_SZ_THIRTEEN "Sending" IDS_TM_SZ_FOURTEEN "Receiving" IDS_TM_SZ_FIFTEEN "End of file" END STRINGTABLE DISCARDABLE BEGIN IDS_TM_SZ_SIXTEEN "Disk error" IDS_TM_SZ_SEVENTEEN "Service request" IDS_TM_SZ_EIGHTEEN "Challenge" IDS_TM_SZ_NINETEEN "Completed" IDS_TM_SZ_TWENTY "Cancelled" IDS_TM_SZ_TWENTYONE "Service request" IDS_TM_SZ_TWENTYTWO "Command error" IDS_TM_SZ_TWENTYTHREE "Command error" IDS_TM_SZ_TWENTYFOUR "Error in packet format" IDS_TM_SZ_TWENTYFIVE "Sending acknowledgement" IDS_TM_SZ_TWENTYSIX "Virus detected" END STRINGTABLE DISCARDABLE BEGIN /* A block of X and Y modem display messages, more blocks will follow */ IDS_TM_RX_ZERO, "" IDS_TM_RX_ONE "Good packet" IDS_TM_RX_TWO "Alt packet" IDS_TM_RX_THREE "No batch packet" IDS_TM_RX_FOUR "End packet" IDS_TM_RX_FIVE "Repeat packet" IDS_TM_RX_SIX "Wrong packet" IDS_TM_RX_SEVEN "Short packet" IDS_TM_RX_EIGHT "Bad format" IDS_TM_RX_NINE "Bad check value" IDS_TM_RX_TEN "No packet" IDS_TM_RX_ELEVEN "Block aborted" IDS_TM_RX_TWELVE "No response" IDS_TM_RX_THIRTEEN "Got retry request" IDS_TM_RX_FOURTEEN "Unrequested response" END STRINGTABLE DISCARDABLE BEGIN IDS_TM_KRM_CANT_OPEN "Can't open or create %s." IDS_TM_KRM_CANT_WRITE "Can't write to disk." IDS_TM_KRM_VIRUS_DETECT "Transfer failed - virus detected!" END STRINGTABLE DISCARDABLE BEGIN IDS_TM_K_ZERO, "" IDS_TM_K_ONE "No response (timeout)" IDS_TM_K_TWO "Retry request" IDS_TM_K_THREE "Data error" IDS_TM_K_FOUR "Remote system error" IDS_TM_K_FIVE "Bad packet format" IDS_TM_K_SIX "Packet repeated" IDS_TM_K_SEVEN "Packet out of sequence" IDS_TM_K_EIGHT "Fatal error" IDS_TM_K_NINE "Transfer canceled by user" END STRINGTABLE DISCARDABLE BEGIN /* --- Statusbar Strings --- */ IDS_STATUSBR_CONNECT "Connected" IDS_STATUSBR_CONNECT_FORMAT "Connected %s" // // The string directly below is only used to calculate the size of // the connection part when time connected is showing. // IDS_STATUSBR_CONNECT_FORMAT_X "Connected 00:00:00" IDS_STATUSBR_DISCONNECT "Disconnected" IDS_STATUSBR_CONNECTING "Connecting" IDS_STATUSBR_DISCONNECTING "Disconnecting" IDS_STATUSBR_SCRL "SCROLL" IDS_STATUSBR_CAPL "CAPS" IDS_STATUSBR_NUML "NUM" IDS_STATUSBR_CAPTUREON "Capture" IDS_STATUSBR_PRINTECHOON "Print echo" IDS_STATUSBR_COM "19200 8-N-1" IDS_STATUSBR_AUTODETECT "Auto detect" IDS_STATUSBR_COM_TCPIP "TCP/IP" END STRINGTABLE DISCARDABLE BEGIN /* --- Error Messages --- */ IDS_ER_CNCT_BADLINE "You need to install a modem before you can make a connection.\r\nWould you like to do this now?" IDS_ER_CNCT_TAPIFAILED "HyperTerminal has reported a general TAPI Error. \nPlease close HyperTerminal and try again." IDS_ER_CNCT_TAPINOMEM "There is not enough memory available. Quit some programs, and then try again." IDS_ER_CNCT_CALLUNAVAIL "Another program is using the selected Telephony device.\nTry again after the other program completes." IDS_ER_CNCT_PORTFAILED "Unable to open %s." IDS_ER_TAPI_CONFIG "Please confirm the modem/port selection in the following dialog. (This session either had no previous selection or that selection is absent from your TAPI configuration.)" IDS_ER_CNCT_BADADDRESS "The phone number, area code or country code contain invalid characters." END STRINGTABLE DISCARDABLE BEGIN IDS_ER_TITLE "Fatal Error" IDS_ER_XFER_NO_FILE "No matching file was found." IDS_ER_BAD_SESSION "Could not read session file: %s." IDS_ER_REINIT "Could not reinitalize." IDS_ER_TAPI_REINIT "Quit HyperTerminal so your new communications settings can take effect." IDS_ER_TAPI_REINIT2 "You cannot use any telephony devices until you do." IDS_ER_TAPI_NEEDS_INFO "Before HyperTerminal can dial or make connections, you must provide information about your location." IDS_ER_OPEN_FAILED "Could not open file." END STRINGTABLE DISCARDABLE BEGIN /* --- Print Messages --- */ IDS_PRINT_ERROR "A general printer error occured while printing. Click OK to cancel printing." IDS_PRINT_NOW_PRINTING "Now printing page %d of" IDS_PRINT_NOMEM "There is not enough memory to print this file. Quit some programs and then try again." IDS_PRINT_CANCEL "There is not enough memory to complete this operation. Quit some programs and then try again." IDS_PRINT_OF_DOC "'%s' on the" IDS_PRINT_ON_DEV "%1 on %2" IDS_PRINT_NO_PRINTER "There is no default printer selected.\x0ATo install and select a default printer, click the Start button, point to Settings, click Printers, and then double-click Add Printer." IDS_PRINT_TITLE "Print Error" IDS_PRINT_FILTER_1 "Printer Files (*.prn)" IDS_PRINT_FILTER_2 "*.prn" IDS_PRINT_FILTER_3 "All Files (*.*)" IDS_PRINT_FILTER_4 "*.*" IDS_PRINT_TOFILE "Print To File" IDS_PRINT_FILENAME "Output" END STRINGTABLE DISCARDABLE BEGIN /* --- ToolTip Text --- */ IDS_TTT_NEW "New" IDS_TTT_OPEN "Open" IDS_TTT_DIAL "Connect" IDS_TTT_HANGUP "Disconnect" IDS_TTT_SEND "Send" IDS_TTT_RECEIVE "Receive" IDS_TTT_PROPERTY "Properties" /* IDS_TTT_HELP "Help" */ END STRINGTABLE DISCARDABLE BEGIN /* --- Minitel buttons --- */ IDS_SIDEBAR_INDEX "Index" IDS_SIDEBAR_CANCEL "Cancel" IDS_SIDEBAR_PREVIOUS "Previous" IDS_SIDEBAR_REPEAT "Repeat" IDS_SIDEBAR_GUIDE "Guide" IDS_SIDEBAR_CORRECT "Correct" IDS_SIDEBAR_NEXT "Next" IDS_SIDEBAR_MSEND "Send" IDS_SIDEBAR_CONFIN "Cnct/Discnct" END /* --- Menu Help Text --- */ STRINGTABLE DISCARDABLE BEGIN 40100 "Creates a new connection" 40101 "Opens an existing session" 40102 "Saves the current session" 40103 "Saves the current session with a new name" 40104 "Changes page layout settings" 40105 "Selects a printer" 40106 "Prints the current session" 40107 "Displays the properties of the current session" 40108 "Quits HyperTerminal and saves the current session" END STRINGTABLE DISCARDABLE BEGIN 40200 "Copies the selection to the Clipboard" 40201 "Sends the contents of the Clipboard to the remote computer" 40202 "Selects the entire session, including the backscroll buffer" END STRINGTABLE DISCARDABLE BEGIN 40300 "Shows or hides the tool bar" 40301 "Shows or hides the status bar" 40302 "Selects a font for the current session" END STRINGTABLE DISCARDABLE BEGIN 40400 "Connects to remote system" 40401 "Disconnects from the remote system" 40402 "Sends a file to the remote system" 40403 "Receives a file from the remote system" 40404 "Creates a file of all incoming text" 40405 "Prints incoming text as it is received" 40406 "Sends a text file to the remote system" END STRINGTABLE DISCARDABLE BEGIN 40420 "Stop capturing..." 40421 "Pause capturing..." 40422 "Resume capturing..." 40424 "Stop..." 40425 "Pause..." 40426 "Resume..." END STRINGTABLE DISCARDABLE BEGIN 40501 "Displays Help topics" 40502 "Displays program information, version number, and copyright" END STRINGTABLE DISCARDABLE BEGIN 40000 "File" 40001 "Edit" 40002 "View" 40003 "Actions" 40004 "Transfer" 40005 "Help" END STRINGTABLE DISCARDABLE BEGIN 40800 "Sends a file to the remote system" 40801 "Receives a file from the remote system" 40802 "Prints the current session" 40803 "Copies the selection to the Clipboard" 40804 "Sends the contents of the Clipboard to the remote computer" 40805 "Selects the entire session, including the backscroll buffer" 40806 "What's This..." 40807 "Resizes the HyperTerminal window to match the terminal size" END STRINGTABLE DISCARDABLE BEGIN /* --- Connection dialog strings --- */ IDS_DIAL_OFFERING "Connecting" IDS_DIAL_DIALTONE "Dial Tone" IDS_DIAL_DIALING "Dialing" IDS_DIAL_RINGBACK "Ring Back" IDS_DIAL_BUSY "Busy" IDS_DIAL_CONNECTED "Connected" IDS_DIAL_DISCONNECTED "Disconnected" IDS_DIAL_NOANSWER "No Answer" IDS_DIAL_NODIALTONE "No Dialtone" IDS_DIAL_REDIAL_IN "Redial in %d" /* --- Connection messages --- */ IDS_CNCT_OPEN "\r\n=====> Connected %1, %2\r\n" IDS_CNCT_CLOSE "\r\n=====> Disconnected %1, %2" /* --- Default terminal font --- */ #if defined(INCL_USE_TERMINAL_FONT) IDS_TERM_DEF_FONT "Terminal" IDS_TERM_DEF_NONVGA_SIZE "-15" #else IDS_TERM_DEF_FONT "Courier New" IDS_TERM_DEF_NONVGA_SIZE "-15" #endif IDS_TERM_DEF_CHARSET "254" IDS_TERM_DEF_VGA_SIZE "-11" /* --- Base name of direct com ports --- */ IDS_CNCT_DIRECTCOM "Direct to Com%d" IDS_CNCT_DIRECTCOM_NT "Direct to %s" /* --- Delayed dialing string --- */ IDS_CNCT_DELAYEDDIAL "Dialing is paused. Click OK when you are ready to continue dialing." END STRINGTABLE DISCARDABLE BEGIN IDS_EMUNAME_AUTO "Auto detect" IDS_EMUNAME_ANSI "ANSI" IDS_EMUNAME_MINI "Minitel" IDS_EMUNAME_VIEW "Viewdata" IDS_EMUNAME_TTY "TTY" IDS_EMUNAME_VT100 "VT100" IDS_EMUNAME_VT52 "VT52" IDS_EMUNAME_VT100J "VT100J" IDS_EMUNAME_ANSIW "ANSIW" END #if defined(NT_EDITION) // mrw:7/8/95 STRINGTABLE DISCARDABLE BEGIN IDS_UPGRADE+0 "\t\t\tHyperTerminal" IDS_UPGRADE+1 "\n\n" IDS_UPGRADE+2 "HyperTerminal is designed to satisfy your basic communications needs in a small, easy-to-use product. " IDS_UPGRADE+3 "It demonstrates many of the new features of Windows NT including TAPI, Unimodem, and the Windows 95 user interface." IDS_UPGRADE+4 "\n\n" IDS_UPGRADE+5 "HyperTerminal Version 1.1 is a more powerful version of the HyperTerminal program that shipped in the first release of Windows 95. " IDS_UPGRADE+6 "HyperTerminal Version 1.1 includes Zmodem crash recovery, redial on busy, and better font handling and display. HyperTerminal was written for Microsoft by Hilgraeve Inc." IDS_UPGRADE+7 "\n\n" IDS_UPGRADE+8 "If you need features beyond what HyperTerminal offers, Hilgraeve and other vendors of Windows NT software have larger full-featured products that may better satisfy your needs. " IDS_UPGRADE+9 "Here are some of the features and benefits you can expect from many commercial products." IDS_UPGRADE+10 "\n\n" IDS_UPGRADE+11 "* Record and play back logons and other repetitive steps\n" IDS_UPGRADE+12 "* Define your own keys and buttons with text or bitmap labels\n" IDS_UPGRADE+13 "* Automate communications with a powerful script language\n" IDS_UPGRADE+14 "* Make the backscroll buffer as large as you want\n" IDS_UPGRADE+15 "* Additional terminal emulators and file transfer protocols\n" IDS_UPGRADE+16 "* Added connectivity, like telnet access to Internet, modem pool support, and much more\n" IDS_UPGRADE+17 "\n" IDS_UPGRADE+18 "For sales information on full-featured Hilgraeve products, ask any software dealer, or call Hilgraeve sales lines at 800-826-2760 (US and Canada), 313-243-0576, fax 313-243-0645. " IDS_UPGRADE+19 "You can also find information on Hilgraeve products at http://www.hilgraeve.com." IDS_UPGRADE+20 "\n\n" IDS_UPGRADE+21 " " IDS_UPGRADE+22 " " IDS_UPGRADE+23 " " IDS_UPGRADE+24 " " IDS_UPGRADE+25 " " IDS_UPGRADE+26 " " IDS_UPGRADE+27 " " IDS_UPGRADE+28 " " IDS_UPGRADE+29 " " IDS_UPGRADE+30 " " IDS_UPGRADE+31 " " IDS_UPGRADE+32 " " IDS_UPGRADE+33 " " IDS_UPGRADE+34 " " IDS_UPGRADE+35 " " IDS_UPGRADE+36 " " IDS_UPGRADE+37 " " IDS_UPGRADE+38 " " IDS_UPGRADE+39 " " IDS_UPGRADE+40 " " IDS_UPGRADE+41 " " IDS_UPGRADE+42 " " IDS_UPGRADE+43 " " IDS_UPGRADE+44 " " IDS_UPGRADE+45 " " IDS_UPGRADE+46 " " IDS_UPGRADE+47 " " IDS_UPGRADE+48 " " IDS_UPGRADE+49 " " IDS_UPGRADE+50 " " END #endif /* ---------------------------------------------------------------------- */ IDA_WACKER ACCELERATORS MOVEABLE PURE BEGIN VK_F10, IDA_CONTEXT_MENU, VIRTKEY, SHIFT; SHIFT+F10 END /* ---------------------------------------------------------------------- */ IDB_BUTTONS_LARGE BITMAP buttons.bmp IDB_BUTTONS_SMALL BITMAP sbuttons.bmp #if defined(NT_EDITION) IDD_BM_BANNER BITMAP banner.bmp #elif defined(INCL_PRIVATE_EDITION_BANNER) IDD_BM_BANNER BITMAP htpebnr.bmp #else IDD_BM_BANNER BITMAP banner1.bmp #endif #if defined(INCL_SPINNING_GLOBE) IDR_GLOBE_AVI AVI globe.avi #endif /* ---------------------------------------------------------------------- */ #include