#include "insignia.h"
#include "host_def.h"
/*			INSIGNIA MODULE SPECIFICATION
			-----------------------------

MODULE NAME	: Bios code for accessing the cmos

	THIS PROGRAM SOURCE FILE IS SUPPLIED IN CONFIDENCE TO THE
	CUSTOMER, THE CONTENTS  OR  DETAILS  OF ITS OPERATION MAY 
	ONLY BE DISCLOSED TO PERSONS EMPLOYED BY THE CUSTOMER WHO
	REQUIRE A KNOWLEDGE OF THE  SOFTWARE  CODING TO CARRY OUT 
	THEIR JOB. DISCLOSURE TO ANY OTHER PERSON MUST HAVE PRIOR
	AUTHORISATION FROM THE DIRECTORS OF INSIGNIA SOLUTIONS INC.

DESIGNER	: J.P.Box
DATE		: September '88

PURPOSE		: To provide routines to initialise and access the 
		CMOS

The Following Routines are defined:
		1. set_tod
		2. cmos_read
		3. cmos_write

=========================================================================

AMENDMENTS	:

=========================================================================
*/

/*
 * static char SccsID[]="@(#)cmos_bios.c	1.7 08/25/93 Copyright Insignia Solutions Ltd.";
 */


#ifdef SEGMENTATION
/*
 * The following #include specifies the code segment into which this
 * module will by placed by the MPW C compiler on the Mac II running
 * MultiFinder.
 */
#include "SOFTPC_CMOS.seg"
#endif

#include "xt.h"
#include "bios.h"
#include "sas.h"
#include "cmos.h"
#include "cmosbios.h"
#include "ios.h"
#include "rtc_bios.h"

#ifndef NTVDM
/*
=========================================================================

FUNCTION	: set_tod

PURPOSE		: Reads the time from the CMOS and sets the timer
		data area in the BIOS

RETURNED STATUS	: None

DESCRIPTION	:


=======================================================================
*/
#define BCD_TO_BIN( n )		((n & 0x0f) + (((n >> 4) & 0x0f) * 10))

void set_tod()
{
	half_word	value;		/* time value read from CMOS	*/
	DOUBLE_TIME	timer_tics;	/* time converted to ticks	*/
	double_word	tics_temp;	/* prevent floating point code  */
	
	/* set data area to 0 in case of error return	*/
	sas_storew(TIMER_LOW, 0);
	sas_storew(TIMER_HIGH, 0);
	sas_store(TIMER_OVFL, 0);
	
	/* read seconds	*/
	value = cmos_read( CMOS_SECONDS + NMI_DISABLE );
	if( value > 0x59)
	{
		value = cmos_read( CMOS_DIAG + NMI_DISABLE );
		cmos_write( CMOS_DIAG + NMI_DISABLE, (value | CMOS_CLK_FAIL) );
		return;
	}
	tics_temp = BCD_TO_BIN( value ) * 73;	/* was 18.25 */
	tics_temp /= 4;
	timer_tics.total = tics_temp;
	
	/* read minutes	*/
	value = cmos_read( CMOS_MINUTES + NMI_DISABLE );
	if( value > 0x59)
	{
		value = cmos_read( CMOS_DIAG + NMI_DISABLE );
		cmos_write( CMOS_DIAG + NMI_DISABLE, (value | CMOS_CLK_FAIL) );
		return;
	}
	tics_temp = BCD_TO_BIN( value ) * 2185;	/* was 1092.5 */
	tics_temp /= 2;
	timer_tics.total += tics_temp;

	/* read hours	*/
	value = cmos_read( CMOS_HOURS + NMI_DISABLE );
	if( value > 0x23)
	{
		value = cmos_read( CMOS_DIAG + NMI_DISABLE );
		cmos_write( CMOS_DIAG + NMI_DISABLE, (value | CMOS_CLK_FAIL) );
		return;
	}
	timer_tics.total += BCD_TO_BIN( value ) * 65543L;

	/* write total to bios data area	*/
	
	sas_storew(TIMER_LOW, timer_tics.half.low);
	sas_storew(TIMER_HIGH, timer_tics.half.high);
	
	return;
}
#endif


/*
=========================================================================

FUNCTION	: cmos_read

PURPOSE		: Reads a byte from the cmos system clock configuration table
		from the CMOS address specified

RETURNED STATUS	: The value read from the CMOS

DESCRIPTION	:


=======================================================================
*/
half_word cmos_read(table_address)

/*   IN  */
half_word table_address;		/* cmos table address to be read	*/

{
	half_word	value;		/* value read from cmos			*/
	
	outb( CMOS_PORT, (table_address | NMI_DISABLE) );
	
	inb( CMOS_DATA, &value );
	
	/*
	 * Set bit 7 if it was previously set  in table_address
	 */
	outb( CMOS_PORT, (CMOS_SHUT_DOWN | (table_address & NMI_DISABLE)) );
	
	return ( value );
}

/*
=========================================================================

FUNCTION	: cmos_read

PURPOSE		: Writes a byte to the cmos system clock configuration table
		at the CMOS address specified

RETURNED STATUS	: none

DESCRIPTION	:


=======================================================================
*/
void cmos_write(table_address, value)
/*  IN  */
half_word table_address,		/* cmos table address to be written	*/
	  value;			/* value to be written			*/

{
	outb( CMOS_PORT, (table_address | NMI_DISABLE) );

	outb( CMOS_DATA, value );
	
	/*
	 * Set bit 7 if it was previously set  in table_address
	 */
	outb( CMOS_PORT, (CMOS_SHUT_DOWN | (table_address & NMI_DISABLE)) );
	
	return;
}