/*++

*****************************************************************************
*                                                                           *
*  This software contains proprietary and confidential information of       *
*                                                                           *
*                    Digi International Inc.                                *
*                                                                           *
*  By accepting transfer of this copy, Recipient agrees to retain this      *
*  software in confidence, to prevent disclosure to others, and to make     *
*  no use of this software other than that for which it was delivered.      *
*  This is an unpublished copyrighted work of Digi International Inc.       *
*  Except as permitted by federal law, 17 USC 117, copying is strictly      *
*  prohibited.                                                              *
*                                                                           *
*****************************************************************************

Module Name:

   ntxall.h

Abstract:

   This module is responsible for PC/X* and MC/X* specific definitions.
   This module is used by ntxall.c and contains all information specific
   to X* line of products.


Revision History:

 * $Log: ntxall.h $
 * Revision 2.0  1995/09/19 15:04:56  dirkh
 * Express modem signals as explicit values, not bit numbers.
 *
 * Revision 1.5  1994/07/31 14:41:56  rik
 * added 200 baud to baud table.
 *
 * Revision 1.4  1993/09/07  14:34:28  rik
 * Ported memory mapped access to properly work with DEC Alpha machines.
 * 
 * Revision 1.3  1993/08/25  17:43:56  rik
 * Added support for Microchannel controllers.
 * 
 * Revision 1.2  1993/06/25  10:15:02  rik
 * Changed Error logging to allow me to pass in up to 2 strings which
 * will be dynamically inserted into the event log message.
 * 
 * Added support for baud rates 57600 & 115200.
 * 
 * Revision 1.1  1993/03/08  08:40:57  rik
 * Initial revision
 * 

--*/



#ifndef _NTXALL_DOT_H
#  define _NTXALL_DOT_H
   static char RCSInfo_NTXALLDotH[] = "$Header: s:/win/nt/ntxall/rcs/ntxall.h 2.0 1995/09/19 15:04:56 dirkh Exp $";
#endif

#define FEP_MEM_ENABLE  0x80

#define FEP_GLOBAL_WINDOW        0x00
#define FEP_EVENT_WINDOW         FEP_GLOBAL_WINDOW
#define FEP_COMMAND_WINDOW       FEP_GLOBAL_WINDOW

#define FEP_COMMAND_OFFSET       0x0400
#define FEP_EVENT_OFFSET         0x0800

//
// Baud rate settings
//
#define B50       0x0001
#define B75       0x0002
#define B110      0x0003
#define B134      0x0004
#define B150      0x0005
#define B200      0x0006
#define B300      0x0007
#define B600      0x0008
#define B1200     0x0009
#define B1800     0x000A
#define B2400     0x000B
#define B4800     0x000C
#define B9600     0x000D
#define B14400    0x0404
#define B19200    0x000E
#define B28800    0x0405
#define B38400    0x000F
#define B57600    0x0401
#define B115200   0x0403

// unsupported baud rates
#define B2000     -1
#define B3600     -1
#define B7200     -1
#define B56000    -1
#define B128000   -1
#define B256000   -1
#define B512000   -1


//
// We need to export the Modem Control & Status bitfields.
// These values are placed in an area which has been defined to mean:
//    ModemSignals[] = { DTR, RTS, RESERVE1, RESERVE2, CTS, DSR, RI, DCD };
//
// Each entry represents the bit value of the related signal for this particular controller.
//
#define DTR_CONTROL  0x80
#define RTS_CONTROL  0x02
#define RESERVED1    0x01
#define RESERVED2    0x04
#define CTS_STATUS   0x20
#define DSR_STATUS   0x10
#define RI_STATUS    0x40
#define DCD_STATUS   0x08

//
// The following defines are used for MCA support
//
#define MCA_IO_PORT_MASK   0x0070
#define MCA_MEMORY_MASK    0xFF80
#define MCA_IRQ_MASK       0x000E

#define MCA_XPORT_POS_ID   0x6FE7