/**************************************************************************** * * MDGPCMC.C * * PCMCIA Adapter Detection Module * * Copyright (c) Madge Networks Ltd 1995 * * COMPANY CONFIDENTIAL - RELEASED TO MICROSOFT CORP. ONLY FOR DEVELOPMENT * OF WINDOWS95 NETCARD DETECTION - THIS SOURCE IS NOT TO BE RELEASED OUTSIDE * OF MICROSOFT WITHOUT EXPLICIT WRITTEN PERMISSION FROM AN AUTHORISED * OFFICER OF MADGE NETWORKS LTD. * * Created: PBA 11/01/1994 * ****************************************************************************/ #include #include #include #include #include #include #include #include "mdgncdet.h" // // Prototype "borrowed" from WINUSER.H // extern int WINAPIV wsprintfW(LPWSTR, LPCWSTR, ...); /*--------------------------------------------------------------------------- | | PCMCIA adapter types. These correspond to the indexes that the upper layers | use for identifying adapters, so change them with care. | |--------------------------------------------------------------------------*/ #define SMART_NONE 0 #define SMART_PCMCIA 1000 /*--------------------------------------------------------------------------- | | A selection of IO locations that PCMCIA adapters can be at. | ---------------------------------------------------------------------------*/ static ULONG PcmciaIoLocations[18] = {0x0300, 0x1a20, 0x2a20, 0x3a20, 0x0140, 0x0920, 0x0940, 0x0960, 0x0980, 0x0a20, 0x0a40, 0x0a60, 0x0a80, 0x0aa0, 0x0b20, 0x0b40, 0x0b60, 0x0b80}; /*--------------------------------------------------------------------------- | | List of adapter types supported by this module. | |---------------------------------------------------------------------------*/ static ADAPTER_INFO Adapters[] = { { SMART_PCMCIA, MDGPCMCIA, L"Madge 16/4 PCMCIA Ringnode", L"Madge Networks", L"IOLOCATION\0" L"000\0" L"00100\0" L"DMACHANNEL\0" L"000\0" L"00100\0" L"INTERRUPTNUMBER\0" L"000\0" L"000\0" L"MULTIPROCESSOR\0" L"000\0" L"00100\0", NULL, 903 } }; /*--------------------------------------------------------------------------- | | Madge specific parameter range information. The order entries in this | table MUST match that in the Adapters table above. (99 is a null entry.) | ---------------------------------------------------------------------------*/ static struct { ULONG IrqRange[16]; ULONG DmaRange[2]; } ParamRange[] = { // // PCMCIA. // { { 10, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, END_OF_LIST}, { 0, END_OF_LIST} } }; /*--------------------------------------------------------------------------- | | Structure for holding state of a search. | |--------------------------------------------------------------------------*/ typedef struct { ULONG IoLocationIndex; ULONG Irq; } PCMCIA_SEARCH_STATE; /*--------------------------------------------------------------------------- | | This is an array of search states. We need one state for each type | of adapter supported. | |--------------------------------------------------------------------------*/ static PCMCIA_SEARCH_STATE SearchStates[sizeof(Adapters) / sizeof(ADAPTER_INFO)] = {0}; /*--------------------------------------------------------------------------- | | Structure for holding a particular adapter's complete information. | |--------------------------------------------------------------------------*/ typedef struct { BOOLEAN Found; ULONG CardType; ULONG BusNumber; INTERFACE_TYPE InterfaceType; ULONG IoLocation; ULONG Dma; ULONG Irq; } PCMCIA_ADAPTER; /*--------------------------------------------------------------------------- | | Function - CheckForCard | | Parameters - busNumber -> The number of the bus to check. | interface -> The interface type of the bus. | ioLocation -> IO location to check. Ý irqNumber -> Pointer to a holder for the returned Ý IRQ number. | | Purpose - Check to see if an Madge Pcmcia card is present in the Ý machine at the given IO location. | | Returns - A card type. | ---------------------------------------------------------------------------*/ static ULONG CheckForCard( ULONG busNumber, INTERFACE_TYPE interface, ULONG ioLocation, ULONG * irqNumber ) { ULONG ioBase; MadgePrint2("CheckForCard (ioLocation=%04lx)\n", ioLocation); if (CheckForPcmciaCard(&ioBase, irqNumber)) { if (ioBase == ioLocation) { MadgePrint1("Found PCMCIA card\n"); return SMART_PCMCIA; } } MadgePrint1("Did not find PCMCIA card\n"); return SMART_NONE; } /*--------------------------------------------------------------------------- | | Function - FindPcmciaCard | | Parameters - adapterNumber -> Adapter type index used to index the | global array SearchStates. | busNumber -> The number of the bus to search. | interface -> The interface type of the bus. | first -> TRUE if this is the first call for | a given adapter type. | type -> The type of adapter to find. | confidence -> Pointer a holder for the confidence in | which the adapter was found. | | Purpose - Search the specified bus for an adapter of the | specified type. If first is TRUE then the search | starts from the first possible IO location. If first is | FALSE then the search starts from one after the last | IO location checked the previous time FindPcmciaCard was called. | | Returns - A WINERROR.H error code. | |--------------------------------------------------------------------------*/ static ULONG FindPcmciaCard( ULONG adapterNumber, ULONG busNumber, INTERFACE_TYPE interface, BOOLEAN first, ULONG type, ULONG * confidence ) { // // If this is the first call then we want to start from the // first possible IO location. // if (first) { SearchStates[adapterNumber].IoLocationIndex = 0; } // // Otherwise we want to start from 1 after were we left off // last time. // else { SearchStates[adapterNumber].IoLocationIndex++; } // // Step through the IO locations in the bus for which there aren't // already Madge adapters installed looking for one with the // required adapter type. If we don't find one we will return a // confidence level of zero. (Note we check that there isn't a // Madge adapter at the IO location first to avoid trashing a // working adapter.) // *confidence = 0; while (SearchStates[adapterNumber].IoLocationIndex < sizeof(PcmciaIoLocations) / sizeof(ULONG)) { if (!MadgeCardAlreadyInstalled( FALSE, busNumber, PcmciaIoLocations[SearchStates[adapterNumber].IoLocationIndex] )) { if (CheckForCard( busNumber, interface, PcmciaIoLocations[SearchStates[adapterNumber].IoLocationIndex], &SearchStates[adapterNumber].Irq ) == type) { *confidence = 100; break; } } SearchStates[adapterNumber].IoLocationIndex++; } return NO_ERROR; } /**************************************************************************** * * Function - MadgePcmciaIdentifyHandler * * Parameters - index -> Index of the adapter type. 1000 for the first * type, 1100 for the second, 1200 for the third * etc. * buffer -> Buffer for the results. * bufferSize -> Size of the buffer in WCHARs. * * Purpose - Return information about a type of adapter that this module * supports. * * Returns - A WINERROR.H error code. ERROR_NO_MORE_ITEMS * is returned if index refers to an adapter type not * supported. * ****************************************************************************/ LONG MadgePcmciaIdentifyHandler( LONG index, WCHAR * buffer, LONG bufferSize ) { LONG numberOfAdapters; LONG action; LONG length; LONG i; MadgePrint2("MadgePcmciaIdentifyHandler (index = %ld)\n", index); // // Do some initialisation. // numberOfAdapters = sizeof(Adapters) / sizeof(ADAPTER_INFO); action = index % 100; index = index - action; // // Check that index does not exceed the number of adapters we // support. // if ((index - 1000) / 100 >= numberOfAdapters) { return ERROR_NO_MORE_ITEMS; } // // If index refers to an adapter type supported then carry out the // requested action. // for (i = 0; i < numberOfAdapters; i++) { if (Adapters[i].Index == index) { switch (action) { // // Return the adapter's abbreviation. // case 0: length = UnicodeStrLen(Adapters[i].InfId) + 1; if (bufferSize < length) { return ERROR_INSUFFICIENT_BUFFER; } memcpy( (VOID *) buffer, Adapters[i].InfId, length * sizeof(WCHAR) ); break; // // Return the adapter's description. // case 1: length = UnicodeStrLen(Adapters[i].CardDescription) + 1; if (bufferSize < length) { return ERROR_INSUFFICIENT_BUFFER; } memcpy( (VOID *) buffer, Adapters[i].CardDescription, length * sizeof(WCHAR) ); break; // // Return the adapter's manufacturer. // case 2: length = UnicodeStrLen(Adapters[i].Manufacturer) + 1; if (bufferSize < length) { return ERROR_INSUFFICIENT_BUFFER; } memcpy( (VOID *) buffer, Adapters[i].Manufacturer, length * sizeof(WCHAR) ); break; // // Return the search order. // case 3: if (bufferSize < 5) { return ERROR_INSUFFICIENT_BUFFER; } wsprintfW( (VOID *) buffer, L"%d", Adapters[i].SearchOrder ); break; // // Anything else is invalid. // default: return ERROR_INVALID_PARAMETER; } return NO_ERROR; } } // // We didn't find an adapter type that matched the index so // return an error. // return ERROR_INVALID_PARAMETER; } /**************************************************************************** * * Function - MadgePcmciaFirstNextHandler * * Parameters - index -> Index of the adapter type. 1000 for the first * type, 1100 for the second, 1200 for the third * etc. * interface -> The NT interface type (ISA, EISA etc). * busNumber -> The bus number to search. * first -> TRUE if the search of this bus should start * from scratch. * token -> Pointer to holder for a token that identifies * the adapter found. * confidence -> Pointer to a holder for the confidence by * which the adapter has been found. * * Purpose - Attempts to find an adapter on the specified bus. If first * is TRUE then the search starts from scratch. Otherwise * the search starts from where it left of the last time we * were called. * * Returns - A WINERROR.H error code. A return code of NO_ERROR * and a *confidence of 0 means we didn't find an adapter. * ****************************************************************************/ LONG MadgePcmciaFirstNextHandler( LONG index, INTERFACE_TYPE interface, ULONG busNumber, BOOL first, VOID * * token, LONG * confidence ) { LONG adapterNumber; ULONG retCode; MadgePrint2("MadgePcmciaFirstNextHandler (index = %ld)\n", index); // // Check the interface type (could be an ISA adapter in an EISA bus). // if (interface != Isa && interface != Eisa) { *confidence = 0; return NO_ERROR; } // // Work out and validate the adapter type being searched for. // adapterNumber = (index - 1000) / 100; if (adapterNumber < 0 || adapterNumber >= sizeof(Adapters) / sizeof(ADAPTER_INFO) || (index % 100) != 0) { return ERROR_INVALID_PARAMETER; } // // Type to find an adapter. // retCode = FindPcmciaCard( (ULONG) adapterNumber, busNumber, interface, (BOOLEAN) first, (ULONG) index, confidence ); if (retCode == NO_ERROR) { // // In this module I use the token as follows: Remember that // the token can only be 2 bytes long (the low 2) because of // the interface to the upper part of this DLL. // // The rest of the high byte is the the bus number. // The low byte is the driver index number into Adapters. // // NOTE: This presumes that there are < 129 buses in the // system. Is this reasonable? // *token = (VOID *) ((busNumber & 0x7F) << 8); *token = (VOID *) (((ULONG) *token) | (adapterNumber << 1)); if (interface == Eisa) { *token = (VOID *) (((ULONG) *token) | 1); } } return retCode; } /**************************************************************************** * * Function - MadgePcmciaOpenHandleHandler * * Parameters - token -> Pointer to holder for a token that identifies * an adapter found by FirstNextHandler. * handle -> Pointer to a holder a handle the caller * should use to query the adapter refered to * by *token. * * Purpose - Generates a handle for an adapter just found by a call * to FirstNextHandler. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaOpenHandleHandler( VOID * token, VOID * * handle ) { PCMCIA_ADAPTER * adapter; ULONG adapterNumber; ULONG busNumber; INTERFACE_TYPE interface; MadgePrint1("MadgePcmciaOpenHandleHandler\n"); // // Get info from the token. // busNumber = (ULONG) (((ULONG) token >> 8) & 0x7F); adapterNumber = (((ULONG) token) & 0xFF) >> 1; MadgePrint2("adapterNumber = %ld\n", adapterNumber); if ((((ULONG) token) & 1) == 1) { interface = Eisa; } else { interface = Isa; } // // Allocate a structure for the details of the adapter. // adapter = (PCMCIA_ADAPTER *) DetectAllocateHeap(sizeof(PCMCIA_ADAPTER)); if (adapter == NULL) { return ERROR_NOT_ENOUGH_MEMORY; } // // Copy the details. // adapter->Found = TRUE; adapter->CardType = Adapters[adapterNumber].Index; adapter->InterfaceType = interface; adapter->BusNumber = busNumber; adapter->IoLocation = PcmciaIoLocations[SearchStates[adapterNumber].IoLocationIndex]; adapter->Dma = 0; // Pcmcia's are always in PIO mode. adapter->Irq = SearchStates[adapterNumber].Irq; *handle = (VOID *) adapter; return NO_ERROR; } /**************************************************************************** * * Function - MadgePcmciaCreateHandleHandler * * Parameters - index -> Index of the adapter type. 1000 for the first * type, 1100 for the second, 1200 for the third * etc. * interface -> NT interface type (Eisa, Isa etc). * busNumber -> Number of the bus containing the adapter. * handle -> Pointer to a holder a handle the caller * should use to query the adapter. * * Purpose - Generates a handle for an adapter that has not been detected * but the caller claims exists. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaCreateHandleHandler( LONG index, INTERFACE_TYPE interface, ULONG busNumber, VOID * * handle ) { PCMCIA_ADAPTER * adapter; LONG numberOfAdapters; LONG i; MadgePrint2("MadgePcmciaCreateHandleHandler (index = %ld)\n", index); // // Check that the interface type is correct for this module // (could be an Isa adapter in an Eisa slot). // if (interface != Isa && interface != Eisa) { return ERROR_INVALID_PARAMETER; } // // If the index is valid then create a handle. // numberOfAdapters = sizeof(Adapters) / sizeof(ADAPTER_INFO); for (i = 0; i < numberOfAdapters; i++) { if (Adapters[i].Index == index) { // // Allocate a structure for the adapter details. // adapter = (PCMCIA_ADAPTER *) DetectAllocateHeap(sizeof(PCMCIA_ADAPTER)); if (adapter == NULL) { return ERROR_NOT_ENOUGH_MEMORY; } // // Copy the details. // adapter->Found = FALSE; adapter->CardType = index; adapter->InterfaceType = interface; adapter->BusNumber = busNumber; adapter->IoLocation = PcmciaIoLocations[0]; adapter->Dma = 0; // Pcmcia's are always in PIO mode. adapter->Irq = RESOURCE_UNKNOWN; *handle = (VOID *) adapter; return NO_ERROR; } } // // We didn't find an adapter type that matched the one the caller // claims exists so return an error. // return ERROR_INVALID_PARAMETER; } /**************************************************************************** * * Function - MadgePcmciaCloseHandleHandler * * Parameters - handle -> Handle to be closed. * * Purpose - Closes a previously opened or created handle. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaCloseHandleHandler( VOID * handle ) { MadgePrint1("MadgePcmciaCloseHandleHandler\n"); DetectFreeHeap(handle); return NO_ERROR; } /**************************************************************************** * * Function - MadgePcmciaQueryCfgHandler * * Parameters - handle -> Handle to for the adapter to be queried. * buffer -> Buffer for the returned parameters. * bufferSize -> Size of the buffer in WCHARs. * * Purpose - Find out what the parameters are for the adapter identified * by the handle. This function does not assume that the * adapter described by the handle is valid if the handle * was created rather than being opened. If the handle * was created then a search is made for an adapter. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaQueryCfgHandler( VOID * handle, WCHAR * buffer, LONG bufferSize ) { PCMCIA_ADAPTER * adapter; ULONG confidence; LONG adapterNumber; LONG retCode; MadgePrint1("MadgePcmciaQueryCfgHandler\n"); // // Do some initialisation. // adapter = (PCMCIA_ADAPTER *) handle; // // Check that the interface type specified by the handle is // valid for this module (could be an Isa card in an Eisa slot). // if (adapter->InterfaceType != Isa && adapter->InterfaceType != Eisa) { return ERROR_INVALID_PARAMETER; } // // If the adapter was created rather than being opened we must search // for an adapter. // if (!adapter->Found) { adapterNumber = (adapter->CardType - 1000) / 100; retCode = FindPcmciaCard( adapterNumber, adapter->BusNumber, adapter->InterfaceType, TRUE, adapter->CardType, &confidence ); // // If we are not 100% sure that we found an adapter with // the right ID we give up. // if (retCode != NO_ERROR || confidence != 100) { return ERROR_INVALID_PARAMETER; } adapter->Found = TRUE; adapter->IoLocation = PcmciaIoLocations[SearchStates[adapterNumber].IoLocationIndex]; adapter->Dma = 0; // Pcmcia's are always in PIO mode. adapter->Irq = SearchStates[adapterNumber].Irq; } // // Build resulting buffer. // // Copy in the IO location. // if (AppendParameter( &buffer, &bufferSize, IoAddrString, adapter->IoLocation ) != NO_ERROR) { return ERROR_INSUFFICIENT_BUFFER; } // // Copy in the DMA channel. // if (AppendParameter( &buffer, &bufferSize, DmaChanString, adapter->Dma ) != NO_ERROR) { return ERROR_INSUFFICIENT_BUFFER; } // // Copy in the IRQ number. // if (AppendParameter( &buffer, &bufferSize, IrqString, adapter->Irq ) != NO_ERROR) { return ERROR_INSUFFICIENT_BUFFER; } // // Copy in the multiprocessor flag. // if (AppendParameter( &buffer, &bufferSize, MultiprocessorString, IsMultiprocessor() ) != NO_ERROR) { return ERROR_INSUFFICIENT_BUFFER; } // // Copy in final \0. // if (bufferSize < 1) { return ERROR_INSUFFICIENT_BUFFER; } *buffer = L'\0'; return NO_ERROR; } /**************************************************************************** * * Function - MadgePcmciaVerifyCfgHandler * * Parameters - handle -> Handle to for the adapter to be verified. * buffer -> Buffer containing the returned parameters. * * Purpose - Verify that the parameters in buffer are correct for * the adapter identified by handle. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaVerifyCfgHandler( VOID * handle, WCHAR * buffer ) { PCMCIA_ADAPTER * adapter; WCHAR * place; BOOLEAN found; ULONG ioLocation; ULONG dmaChannel; ULONG irqNumber; ULONG multiprocessor; LONG adapterNumber; ULONG irq; MadgePrint1("MadgePcmciaVerifyCfgHandler\n"); // // Do some initialisation. // adapter = (PCMCIA_ADAPTER *) handle; adapterNumber = (adapter->CardType - 1000) / 100; // // Check that the interface type is correct for this module // (could be an Isa adapter in an Eisa slot). // if (adapter->InterfaceType != Isa && adapter->InterfaceType != Eisa) { return ERROR_INVALID_DATA; } // // Parse the parameters. // // // Get the IO location. // place = FindParameterString(buffer, IoAddrString); if (place == NULL) { return ERROR_INVALID_DATA; } place += UnicodeStrLen(IoAddrString) + 1; ScanForNumber(place, &ioLocation, &found); if (!found) { return ERROR_INVALID_DATA; } // // Get the DMA channel. // place = FindParameterString(buffer, DmaChanString); if (place == NULL) { return ERROR_INVALID_DATA; } place += UnicodeStrLen(DmaChanString) + 1; ScanForNumber(place, &dmaChannel, &found); if (!found) { return ERROR_INVALID_DATA; } // // Get the IRQ number. // place = FindParameterString(buffer, IrqString); if (place == NULL) { return ERROR_INVALID_DATA; } place += UnicodeStrLen(IrqString) + 1; ScanForNumber(place, &irqNumber, &found); if (!found) { return ERROR_INVALID_DATA; } // // Get the multiprocessor flag. // place = FindParameterString(buffer, MultiprocessorString); if (place == NULL) { return ERROR_INVALID_DATA; } place += UnicodeStrLen(MultiprocessorString) + 1; // // Now parse the value. // ScanForNumber(place, &multiprocessor, &found); // // If the handle does not refer to an adapter that has been found // by search we must query the hardware. // if (!adapter->Found) { if (CheckForCard( adapter->BusNumber, adapter->InterfaceType, ioLocation, &irq ) != adapter->CardType) { return ERROR_INVALID_DATA; } adapter->IoLocation = ioLocation; adapter->Dma = 0; // Pcmcia's are always in PIO mode. adapter->Irq = irq; adapter->Found = TRUE; } // // Verify the parameters. // if (ioLocation != adapter->IoLocation || multiprocessor != IsMultiprocessor()) { return ERROR_INVALID_DATA; } if (adapter->Dma == RESOURCE_UNKNOWN) { if (!IsValueInList(dmaChannel, ParamRange[adapterNumber].DmaRange)) { return ERROR_INVALID_DATA; } } else if (adapter->Dma != dmaChannel) { return ERROR_INVALID_DATA; } if (adapter->Irq == RESOURCE_UNKNOWN) { if (!IsValueInList(irqNumber, ParamRange[adapterNumber].IrqRange)) { return ERROR_INVALID_DATA; } } else if (adapter->Irq != irqNumber) { return ERROR_INVALID_DATA; } // // If we make it to here everything checked out ok. // return NO_ERROR; } /**************************************************************************** * * Function - MadgePcmciaQueryMaskHandler * * Parameters - index -> Index of the adapter type. 1000 for the first * type, 1100 for the second, 1200 for the third * etc. * buffer -> Buffer for the returned parameters. * bufferSize -> Size of buffer in WCHARs. * * Purpose - Return the list of parameters required for the adapter * type specified by index. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaQueryMaskHandler( LONG index, WCHAR * buffer, LONG bufferSize ) { WCHAR * params; LONG length; LONG numberOfAdapters; LONG i; MadgePrint2("MadgePcmciaQueryMaskHandler (index = %ld)\n", index); MadgePrint2("BufferSize = %ld\n", bufferSize); // // Find the adapter type. // numberOfAdapters = sizeof(Adapters) / sizeof(ADAPTER_INFO); for (i = 0; i < numberOfAdapters; i++) { if (Adapters[i].Index == index) { params = Adapters[i].Parameters; // // Find the string length (Ends with 2 NULLs) // for (length = 0; ; length++) { if (params[length] == L'\0') { length++; if (params[length] == L'\0') { break; } } } length++; MadgePrint2("length = %ld\n", length); // // Copy the parameters into buffer. // if (bufferSize < length) { return ERROR_NOT_ENOUGH_MEMORY; } memcpy((VOID *) buffer, params, length * sizeof(WCHAR)); return NO_ERROR; } } // // If we make it here we did not find a valid adapter type so // return and error. // return ERROR_INVALID_PARAMETER; } /**************************************************************************** * * Function - MadgePcmciaParamRangeHandler * * Parameters - index -> Index of the adapter type. 1000 for the first * type, 1100 for the second, 1200 for the third * etc. * param -> Paramter being queried. * buffer -> Buffer for the returned parameters. * bufferSize -> Size of buffer in LONGs. * * Purpose - Return the list of acceptable values for the parameter * specified. * * Returns - A WINERROR.H error code. * ****************************************************************************/ LONG MadgePcmciaParamRangeHandler( LONG index, WCHAR * param, LONG * buffer, LONG * bufferSize ) { LONG i; LONG adapterNumber; LONG count; MadgePrint2("MadgePcmciaParamRangeHandler (index=%ld)\n", index); // // Work out and validate the adapter number. // adapterNumber = (index - 1000) / 100; if (adapterNumber < 0 || adapterNumber >= sizeof(Adapters) / sizeof(ADAPTER_INFO) || (index % 100) != 0) { return ERROR_INVALID_PARAMETER; } // // The simplest parameter is the IO location because this is the // same for all of the adapter types. // if (UnicodeStringsEqual(param, IoAddrString)) { count = sizeof(PcmciaIoLocations) / sizeof(ULONG); if (*bufferSize < count) { return ERROR_INSUFFICIENT_BUFFER; } for (i = 0; i < count; i++) { buffer[i] = PcmciaIoLocations[i]; } *bufferSize = count; return NO_ERROR; } // // IRQ number is slightly more complicated because it is different // for different adapter types. // else if (UnicodeStringsEqual(param, IrqString)) { count = 0; while (ParamRange[adapterNumber].IrqRange[count] != END_OF_LIST) { count++; } if (*bufferSize < count) { return ERROR_INSUFFICIENT_BUFFER; } for (i = 0; i < count; i++) { buffer[i] = ParamRange[adapterNumber].IrqRange[i]; } *bufferSize = count; return NO_ERROR; } // // Likewise DMA channel. // else if (UnicodeStringsEqual(param, DmaChanString)) { count = 0; while (ParamRange[adapterNumber].DmaRange[count] != END_OF_LIST) { count++; } if (*bufferSize < count) { return ERROR_INSUFFICIENT_BUFFER; } for (i = 0; i < count; i++) { buffer[i] = ParamRange[adapterNumber].DmaRange[i]; } *bufferSize = count; return NO_ERROR; } // // Or fill in the allowable values for the multiprocessor flag. // else if (UnicodeStringsEqual(param, MultiprocessorString)) { if (*bufferSize < 2) { return ERROR_INSUFFICIENT_BUFFER; } *bufferSize = 2; buffer[0] = 0; buffer[1] = 1; return NO_ERROR; } // // If we reach this point we have been passed a parameter we // don't know about. // return ERROR_INVALID_DATA; } /**************************************************************************** * * Function - MadgePcmciaQueryParameterNameHandler * * Parameters - param -> Paramter being queried. * buffer -> Buffer for the returned name. * bufferSize -> Size of buffer in WCHARs. * * Purpose - Return the name of a parameter. * * Returns - ERROR_INVALID_PARAMETER to cause the caller to use * the Microsoft provided default names. * ****************************************************************************/ LONG MadgePcmciaQueryParameterNameHandler( WCHAR * param, WCHAR * buffer, LONG bufferSize ) { return ERROR_INVALID_PARAMETER; } /********* End of MDGPCMC.C ************************************************/