# $ K > Out of Memory
More memory was required than is available.  
{bmc bullet.bmp}	There are too many applications, documents, or source files open.
Close any unnecessary applications, documents, or source files that are open.
{bmc bullet.bmp}	There is a module or procedure that is too large.
Break extremely large modules or procedures into smaller ones.
{bmc bullet.bmp}	There are terminate-and-stay resident programs running.
Eliminate terminate-and-stay resident programs.
{bmc bullet.bmp}	There are too many device drivers loaded.
Eliminate unnecessary device drivers.

# $ K > File Not Found
This file cannot be found.
{bmc bullet.bmp}	A statement refers to a file that does not exist.
Check the spelling of the filename, and the path specification.

# $ K > File Already Exists
You tried to create a file with the same name as an existing file.
{bmc bullet.bmp}	Specify a new name, or delete the old file.

# $ K > Disk Full
There is not enough room on the disk to complete the requested operation.
{bmc bullet.bmp}	Move some files to another disk, or delete some files on the current disk.
{bmc bullet.bmp}	Check your Windows\Temp directory or your Recycle Bin for files that you can safely delete.

# $ K > Bad Filename
An error occurred trying to access the specified file.  
{bmc bullet.bmp}	There is an invalid filename.
Filenames must conform to operating system conventions, as well as those of the programming language.  Filenames can be up to 255 characters.  Respecify the filename, and then retry your operation.

# $ K > Path File Access Error
During a file or disk-access operation, the operating system could not make a connection between the path and the filename.  
{bmc bullet.bmp}	The file specification is not correctly formatted.
A filename can contain a fully-qualified (absolute) or relative path.  A fully-qualified path starts with the drive name (if the path is on another drive) and then lists the explicit path from the root to the file.  Any path that is not fully-qualified is relative to the current drive and directory.  
{bmc bullet.bmp}	You attempted to save a file that would replace an existing read-only file.
From Windows Explorer, right-mouse click on the file, and select Properties from the pop-up menu.  From the Properties window, change the properties to enable read/write capability.

# $ K > Path Not Found
The path to a file comprises the drive specification plus the directories and subdirectories used to locate the file.  A path can be relative or absolute.  
{bmc bullet.bmp}	During the file or disk-access operation, the operating system was unable to find the specified path.  Check the pathname and its syntax and retry your operation.

# $ K > Invalid File Format
The file format you have specified is invalid.  The supported file types include:
{bmc bullet.bmp}	Tag Image File Format (TIF):  The OCX supports read/write access.
{bmc bullet.bmp}	At Work Document (AWD):  The OCX supports read/write access.
{bmc bullet.bmp}	PC Paintbrush Format (PCX):  The OCX supports read access.
{bmc bullet.bmp}	Multi-Page Paintbrush Format (DCX):  The OCX supports read access.
{bmc bullet.bmp}	Bitmap Image (BMP):  The OCX supports read/write access.
{bmc bullet.bmp}	Joint Photographic Experts Group (JPG):  The OCX supports read access.

If the file format you specified is a supported file type, then the data in the file may be corrupted.
{bmc bullet.bmp}	Restore the file from a backup copy of the file, if it is available.

# $ K > Set Not Supported at Run Time
You can only set this property at design time.

# $ K > Set Not Supported
You tried to assign a value to a property that is read only at design time and run time.

 # $ K > Get Not Supported at Run Time
You can only get a value for this property at design time.

# $ K > Get Not Supported
You tried to get a value for a property that is write only.

# $ K > Invalid Clipboard Format
The specified Clipboard format is incompatible with the method that is being executed.  
{bmc bullet.bmp}	The two supported Clipboard formats include:
CF_DIB - image data
Wang Annotation - annotation data

# $ K > Invalid Picture
Only an icon, bitmap, or Windows metafile can be assigned to the Picture property or Picture object.  
{bmc bullet.bmp}	You attempted to assign a file to a Picture property or a Picture object that is not recognized as an icon, bitmap, or Microsoft Windows metafile.  For the MouseIcon property, the valid pictures are .ICO and .CUR file types.

# $ K > Printer Error
There is a problem that prevents printing.  
{bmc bullet.bmp}	You do not have a printer installed.
Open My Computer and double-click on the printer icon to install your printer.  The Printers window opens, and then you can double-click on the Add Printer icon to install your printer.
{bmc bullet.bmp}	The printer is not online.
Switch the printer online.
{bmc bullet.bmp}	The printer is jammed, or out of paper.
Correct the paper jam, or add paper.
{bmc bullet.bmp}	You tried to print a form to a printer that can accept only text.
Switch to an installed printer that can print graphics.

# $ K > Invalid Property Array Index
The index number is out of bounds for the specified property.
{bmc bullet.bmp}	Ensure that your index number is within the range for the property you are using.

# $ K > Invalid Icon
You have set the MouseIcon property to an invalid file type.  
{bmc bullet.bmp}	Valid Icon file types are .ICO and .CUR.  

# $ K > Internal Error
An internal error has occurred.  

# $ K > Cancel Pressed
The CancelError property in the Admin OCX has been set to True.  During run time, the Cancel Pressed error will be returned when the user chooses Cancel.  If you do not want this error message to be returned, set the CancelError property to False during design time.  If you are using the Scan OCX, the Cancel Pressed error is returned from a method to inform you that a cancel occurred.

# $ K > Scanner Already Open
The scanner is already open.  
{bmc bullet.bmp}	If the scanner is in use by another application, close the scanner in the other application, and retry your operation.  Otherwise, close the scanner in the current application, via the CloseScanner method, and retry your operation.

# $ K > Scanner Error
An error has occurred with either the scanner or the scanner handler.  This error may be related to your scanner hardware or software.
{bmc bullet.bmp}	Check your scanner hardware to ensure that it is properly powered on, and then retry the scan operation.
{bmc bullet.bmp}	Save your work-in-progress, reboot your PC, and then retry the scan operation.

# $ K > Bad Size
You selected an invalid image size.
{bmc bullet.bmp}	Select a different image size from the TWAIN setup.

# $ K > Start Scanner Failure
The start scanner operation failed.
{bmc bullet.bmp}	Close the scanner driver software, and then retry the scanner operation.

# $ K > Scanner Timeout
The scanner timed out.
{bmc bullet.bmp}	Close the scanner, and then retry the operation.

# $ K > Scanner Not Open
The scanner is closed.  The scanner must be opened prior to initiating a scan operation.
{bmc bullet.bmp}	Open the scanner using the OpenScanner method, and then retry your operation.

# $ K > Invalid Registration Information
The Scan registration information is incorrect.
{bmc bullet.bmp}	Edit the registration information or reinstall the scanner and its software.

# $ K > No Paper Feeder is Available
No paper feeder is available to the scanner.
{bmc bullet.bmp}	Install a paper feeder on your scanner if there is not one already installed.
{bmc bullet.bmp}	If a paper feeder is installed, then check the cable connections between the scanner and the paper feeder.

# $ K > No Paper
There is no paper in the scanner’s paper feeder.
{bmc bullet.bmp}	Check the paper supply and add paper to the feeder.

# $ K > File Limit
Unable to generate new filenames in the current directory.  
{bmc bullet.bmp}	Check the path to ensure that it is valid and retry the template scan.
{bmc bullet.bmp}	Check if all the file numbers have been used.  Valid file numbers range from img00000 through img99999.  If all the file numbers have been used, create a new directory and continue scanning.

# $ K > Scanner Powered Off
The scanner is powered off.
{bmc bullet.bmp}	Check that the scanner is plugged in and that the power is turned on.

# $ K > Scanner Cover Open
The scanner cover is open.
{bmc bullet.bmp}	Close the scanner cover and retry your operation.

# $ K > Scan Aborted
The scan operation was aborted while the scanner was still operating.
{bmc bullet.bmp}	This error message is informational.  No action is necessary.

# $ K > Scanner Jammed
The scanner is jammed.
{bmc bullet.bmp}	Clear the paper path and retry the scan operation.

# $ K > Invalid Compression Type
The compression type is invalid.
{bmc bullet.bmp}	Select a valid compression type from the Page Options dialog box.
{bmc bullet.bmp}	Specify a valid compression type for the specified image file type.  

Setting	Description	
0	Unknown	
1	No compression	
2	Group3(1D)	
3	Group3(Modified Huffman)	
4	PackBits	
5	Group4(2D)	
6	JPEG	

AWD and BMP files must be saved using a Compression Type setting of 1.

# $ K > Invalid Page Type
The page type is invalid.
{bmc bullet.bmp}	Select a different page type from the Page Options dialog box or Scanner Setup dialog box.
{bmc bullet.bmp}	Specify a valid page type based on the specified image file type.

File Types	Valid Page Type	
TIF	All except BGR24	
AWD	Black and White	
BMP	All except RGB24	

# $ K > Invalid Compression Information
The compression information is invalid.
{bmc bullet.bmp}	Select valid compression information from the Page Options dialog box.  You can access the Page Options dialog box from the Image property page of the Scan OCX.

# $ K >  
The method or property used requires that an image is displayed in the Image Edit control window.
{bmc bullet.bmp}	Verify that an image is displayed in the window prior to calling this method or setting this property.

# $ K > No Image Specified
The Image property for the specified image window has not been set correctly or it is blank.
{bmc bullet.bmp}	Check the Image property to ensure that a valid path and image filename have been set.

# $ K > Invalid Annotation Selected
The specified method cannot be completed using the selected annotation.
{bmc bullet.bmp}	Verify that the selected annotation supports the attribute(s) that the method is trying to alter.  For example, if the selected annotation mark is an embedded image, then the SetSelectedAnnotationLineWidth method cannot be used.

# $ K > Parameters Exceed the Maximum Limit
The argument(s) for the specified method exceed the maximum number of characters.
{bmc bullet.bmp}	Respecify the argument(s) using shorter string lengths; for example, the maxiumum length for the DestImageControl property is 50 characters.  A valid string length for this property must be 50 characters or less.

# $ K > Set Not Supported at Design Time
You cannot set this property at design time.  You can only set this property at run time.

# $ K > No Selection Rectangle Drawn
The specified method or property requires that a selection rectangle must be drawn on the displayed image.
{bmc bullet.bmp}	Before you call the method or before you set the specified property, ensure that a selection rectangle is drawn.
{bmc bullet.bmp}	Ensure that the SelectRectangle property of the Image Edit control is set to True to enable the drawing of selection rectangles.

# $ K > Unable to Create Tool Palette
Unable to create the Image Annotation Tool Palette window.
{bmc bullet.bmp}	Save your work, terminate the application, and then retry this operation.

# $ K > Additional Parameters Required
The method requires that you specify additional parameter values.
{bmc bullet.bmp}	Ensure that you specified valid values for all of the parameters required by the method you are using.  For example, the ClipboardCopy method allows you to optionally specify the coordinates of the rectangle that you want to copy.  If you choose to provide any of the recrtangle coordinate values for this method, then you must provide all of the coordinate values.

# $ K > Could Not Get Font Attributes
Could not retrieve the font attributes for the selected annotation.
{bmc bullet.bmp}	Verify that the selected annotation supports the font attribute properties.  Save your work, exit from the application, and then retry the operation.

# $ K > Invalid Annotation Type
The AnnotationType property contains an invalid value.
{bmc bullet.bmp}	Set the AnnotationType property to a valid value.

# $ K > Tool Palette Already Displayed
You can only have one annotation tool palette open per application.
{bmc bullet.bmp}	Ensure that you have only one annotation tool palette open or close the existing annotation tool palette.

# $ K > Tool Palette Not Displayed
To use the Hide method to hide the annotation tool palette, the tool palette must first be displayed.
{bmc bullet.bmp}	Use the ShowAnnotationToolPalette method to display the standard annotation tool palette prior to executing the Hide method.

# $ K > Scanner is Busy
The scanner is in use by another application.
{bmc bullet.bmp}	Close the application that has the scanner in use, and then retry your operation.

# $ K > Permission Denied
You do not have access rights to read or write to this file.
{bmc bullet.bmp}	From Windows Explorer, right-mouse click on the file, and select Properties from the pop-up menu.  From the Properties dialog box, select the appropriate access rights.

# $ K > Illegal Function Call
The method has terminated due to invalid parameters or property values.  
{bmc bullet.bmp}	Check the input parameters of the function you have called.

# $ K > Invalid Property Value
A property has been set to an invalid value.
{bmc bullet.bmp}	Set the property to a valid value and then retry your operation.

# $ K > Page in Use
This error is returned by the DeletePages method from the Image Admin OCX.  You cannot delete a page because it is being displayed by either the Thumbnail OCX or the Image Edit control.  
{bmc bullet.bmp}	Close all images that are being displayed by either the Thumbnail OCX or the Image Edit control and then retry your operation.

# $ K > Invalid Display Scale
The display scale may be valid, but not for the currently displayed image  
{bmc bullet.bmp}	Respecify the value of the Zoom property in the Image Edit control.  You may have to adjust the scale value several times before you find a valid value.

# $ K > Invalid Rectangle
Either no rectangle was drawn, or the specified rectangle coordinates were invalid or out of range for the displayed image.
{bmc bullet.bmp}	Ensure that you are in the image selection mode and then drag the image within range or use the DrawSelectionRectangle method to draw the rectangle.  All X coordinates must be between 0 and the width of the image.  All Y coordinates must be between 0 and the height of the image.

# $ K > Invalid Display Options
You have requested an operation on an image that cannot be currently performed.
{bmc bullet.bmp}	Review the parameters that you last used to display the image.  Operations might include editing operations such as cut, copy, or paste, or modifications such as a rotation.  Ensure that the parameters are valid values.
{bmc bullet.bmp}	You may have specified valid parameters for the methods being used individually; however, if you combined any editing operations, you may have created invalid display parameters.

# $ K > Invalid Page
Either the page number is beyond the range of pages in the file or the page number is 0.
{bmc bullet.bmp}	Ensure that the Page Number property is set to a value that is valid for the currently displayed image.

# $ K > No Annotation Selected
The method requires that an annotation is selected before it is executed.
{bmc bullet.bmp}	Before you execute the method, select the annotation mark.  You can select the annotation mark via the Selection Annotation Tool palette with your mouse.  You can also use the SelectAnnotationGroup method to select all of the marks for the selected annotation group, or you can bundle a group of annotations by drawing a selection rectangle around them.

# $ K > Cannot Delete File
An error occured during the delete operation.
{bmc bullet.bmp}	Ensure that the file exists and that you have provided the correct filename.  If you are on a network, the file may be in use by another user or you may not have the appropriate access rights to perform the delete operation.