Displays a list of installed SCSI adapters. Double-click an adapter to display a list of connected devices.


Displays a list of PC cards currently plugged into your computer.


When this box is checked, a PC card (PCMCIA) icon appears on the taskbar. You can then double-click the icon to see properties of your PC card(s).


Displays the type of PC card (PCMCIA) controller.


Specifies what memory will be used for your PC card devices.


When checked, specifies that Windows NT automatically determine what memory is used by your PC cards.


Specifies the start, end, and length of the memory segment you want to use for your PC cards.


Click this to display properties for the selected device.


Displays a list of tape devices currently connected to your computer along with driver status.


Click this button to rescan SCSI buses for new tape devices. When a new tape device is detected, you are prompted to install the driver for the device.


Click this to display properties for the selected device.


Click this to display and change properties for the selected device.


Specifies general information about your device.


Displays the status of the selected device. If the device has a problem, the type of problem is displayed here.


Specifies general information about the driver for the selected device.


Specifies the status of the displayed driver.


Installs the driver for the displayed device.


Removes the driver for the displayed device.


Configures the driver for the displayed device.


Provides information about your SCSI device.


Provides information about the SCSI adapter this device is connected to.


Specifies the resources currently used by this device.


Changes the values of the setting selected in the Resource Settings box.

If this button is not available, the settings for this device cannot be changed.


Check this box if you want Windows NT to determine available resource settings for this device.


Displays status of installed drivers.


Click this button to install additional drivers.


Click this button to remove the selected driver.