mirror of https://github.com/lianthony/NT4.0
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1621 lines
84 KiB
1621 lines
84 KiB
0408
|
|
COMMON 00000006 0038
|
|
0001 U 0000 "Incorrect DOS version",CR,LF
|
|
0002 U 0000 "%1 already installed",CR,LF
|
|
0003 U 0000 "%1 bytes available on disk",CR,LF
|
|
0004 U 0000 "%1 bytes free",CR,LF
|
|
0005 U 0000 "%1 bytes in bad sectors",CR,LF
|
|
0006 U 0000 "%1 bytes total disk space",CR,LF
|
|
0007 U 0000 "%1 bytes total memory",CR,LF
|
|
0008 U 0000 "%1 bytes used by system",CR,LF
|
|
0009 U 0000 "%1 installed",CR,LF
|
|
0010 U 0000 "%1 not installed",CR,LF
|
|
0011 U 0000 "%1 not installed",CR,LF
|
|
0012 U 0000 "Cannot %1 a network drive",CR,LF
|
|
0013 U 0000 "",
|
|
0014 U 0000 "Cannot %1 a SUBSTed or ASSIGNed drive",CR,LF
|
|
0015 U 0000 "Cannot execute %1",CR,LF
|
|
0016 U 0000 "Expanded Memory not available",CR,LF
|
|
0017 U 0000 "File allocation table bad, drive %1",CR,LF
|
|
0018 U 0000 "File cannot be copied onto itself",CR,LF
|
|
0019 U 0000 "Insert target disk in drive %1",CR,LF
|
|
0020 U 0000 "Insufficient disk space",CR,LF
|
|
0021 U 0000 "Invalid characters in volume label",CR,LF
|
|
0022 U 0000 "Invalid code page",CR,LF
|
|
0023 U 0000 "Invalid date",CR,LF
|
|
0024 U 0000 "Invalid time",CR,LF
|
|
0025 U 0000 "Invalid path",CR,LF
|
|
0026 U 0000 "No source drive specified",CR,LF
|
|
0027 U 0000 "No target drive specified",CR,LF
|
|
0028 U 0000 "Press any key to continue . . .",CR,LF
|
|
0029 U 0000 "Source path required",CR,LF
|
|
0030 U 0000 "System transferred",CR,LF
|
|
0031 U 0000 "",
|
|
0032 U 0000 "Unable to create directory",CR,LF
|
|
0033 U 0000 "Volume in drive %1 has no label",CR,LF
|
|
0034 U 0000 "Volume in drive %1 is %2",CR,LF
|
|
0035 U 0001 "Volume label (11 characters, ENTER for none)? "
|
|
0036 U 0000 "Volume Serial Number is %1-%2",CR,LF
|
|
0037 U 0000 "Incorrect file type",CR,LF
|
|
0038 U 0001 CR,LF
|
|
EXTEND 00000689 0090
|
|
0001 U 0003 "Invalid function"
|
|
0002 U 0000 "File not found"
|
|
0003 U 0000 "Path not found"
|
|
0004 U 0000 "Too many open files"
|
|
0005 U 0000 "Access denied "
|
|
0006 U 0000 "Invalid handle"
|
|
0007 U 0000 "Memory control blocks destroyed"
|
|
0008 U 0000 "Insufficient memory"
|
|
0009 U 0000 "Invalid memory block address"
|
|
0010 U 0000 "Invalid Environment"
|
|
0011 U 0000 "Invalid format"
|
|
0012 U 0000 "Invalid function parameter"
|
|
0013 U 0000 "Invalid data"
|
|
0014 U 0000 "",
|
|
0015 U 0000 "Invalid drive specification"
|
|
0016 U 0000 "Attempt to remove current directory"
|
|
0017 U 0000 "Not same device"
|
|
0018 U 0000 "No more files"
|
|
0019 U 0000 "Write protect error"
|
|
0020 U 0000 "Invalid unit"
|
|
0021 U 0000 "Not ready"
|
|
0022 U 0000 "Invalid device request"
|
|
0023 U 0000 "Data error"
|
|
0024 U 0000 "Invalid device request parameters"
|
|
0025 U 0000 "Seek error"
|
|
0026 U 0000 "Invalid media type"
|
|
0027 U 0000 "Sector not found"
|
|
0028 U 0000 "Printer out of paper error"
|
|
0029 U 0000 "Write fault error"
|
|
0030 U 0000 "Read fault error"
|
|
0031 U 0000 "General failure"
|
|
0032 U 0000 "Sharing violation"
|
|
0033 U 0000 "Lock violation"
|
|
0034 U 0000 "Invalid disk change"
|
|
0035 U 0000 "FCB unavailable"
|
|
0036 U 0000 "System resource exhausted"
|
|
0037 U 0000 "Code page mismatch"
|
|
0038 U 0000 "Out of input"
|
|
0039 U 0000 "Insufficient disk space"
|
|
0040 U 0000 "",
|
|
0041 U 0000 "",
|
|
0042 U 0000 "",
|
|
0043 U 0000 "",
|
|
0044 U 0000 "",
|
|
0045 U 0000 "",
|
|
0046 U 0000 "",
|
|
0047 U 0000 "",
|
|
0048 U 0000 "",
|
|
0049 U 0000 "",
|
|
0050 U 0000 "NET809: Network request not supported"
|
|
0051 U 0000 "NET801: Remote computer not listening"
|
|
0052 U 0000 "NET802: Duplicate name on network"
|
|
0053 U 0000 "NET803: Network path not found"
|
|
0054 U 0000 "NET804: Network busy"
|
|
0055 U 0000 "NET805: Network device no longer exists"
|
|
0056 U 0000 "NET806: NETBIOS command limit exceeded"
|
|
0057 U 0000 "NET807: System error; NETBIOS error"
|
|
0058 U 0000 "NET808: Incorrect response from network"
|
|
0059 U 0000 "NET810: Unexpected network error"
|
|
0060 U 0000 "NET811: Incompatible remote adapter"
|
|
0061 U 0000 "NET812: Print queue full"
|
|
0062 U 0000 "NET813: Not enough space for print file"
|
|
0063 U 0000 "NET814: Print file was cancelled"
|
|
0064 U 0000 "NET815: Network name was deleted"
|
|
0065 U 0000 "Access denied"
|
|
0066 U 0000 "NET817: Network device type incorrect"
|
|
0067 U 0000 "NET818: Network name not found"
|
|
0068 U 0000 "NET819: Network name limit exceeded"
|
|
0069 U 0000 "NET820: NETBIOS session limit exceeded"
|
|
0070 U 0000 "NET821: Sharing temporarily paused"
|
|
0071 U 0000 "NET823: Network request not accepted"
|
|
0072 U 0000 "NET822: Print or disk redirection is paused"
|
|
0073 U 0000 "NET476: Netbeui not loaded"
|
|
0074 U 0000 "NET477: Unexpected adapter close"
|
|
0075 U 0000 "",
|
|
0076 U 0000 "",
|
|
0077 U 0004 "",
|
|
0078 U 0004 "",
|
|
0079 U 0004 "",
|
|
0080 U 0004 "File exists"
|
|
0081 U 0004 "",
|
|
0082 U 0004 "Cannot make directory entry"
|
|
0083 U 0004 "Fail on INT 24"
|
|
0084 U 0004 "Too many redirections"
|
|
0085 U 0004 "Duplicate redirection"
|
|
0086 U 0004 "Invalid password"
|
|
0087 U 0004 "Invalid parameter"
|
|
0088 U 0004 "Network data fault"
|
|
0089 U 0004 "Function not supported by network"
|
|
0090 U 0002 "Required system component not installed"
|
|
PARSE 0000131d 0011
|
|
0001 U 0000 "Too many parameters"
|
|
0002 U 0000 "Required parameter missing"
|
|
0003 U 0000 "Invalid switch"
|
|
0004 U 0000 "Invalid keyword"
|
|
0005 U 0000 "",
|
|
0006 U 0000 "Parameter value not in allowed range"
|
|
0007 U 0000 "Parameter value not allowed"
|
|
0008 U 0000 "Parameter value not allowed"
|
|
0009 U 0000 "Parameter format not correct"
|
|
0010 U 0000 "Invalid parameter"
|
|
0011 U 0000 "Invalid parameter combination"
|
|
COMMAND 000014d4 0147
|
|
1002 U 0000 "Duplicate file name or file not found",CR,LF
|
|
1003 U 0000 "Invalid path or file name",CR,LF
|
|
1007 U 0000 "Out of environment space",CR,LF
|
|
1008 U 0000 "File creation error",CR,LF
|
|
1009 U 0000 "Batch file missing",CR,LF
|
|
1010 U 0000 CR,LF,"Insert disk with batch file",CR,LF
|
|
1011 U 0000 "Bad command or file name",CR,LF
|
|
1016 U 0000 "Content of destination lost before copy",CR,LF
|
|
1017 U 0000 "Invalid filename or file not found",CR,LF
|
|
1018 U 0000 "%1 file(s) copied",CR,LF
|
|
1019 U 0000 "%1 file(s) "
|
|
1022 U 0000 "Code page %1 not prepared for system",CR,LF
|
|
1023 U 0000 "Code page %1 not prepared for all devices",CR,LF
|
|
1024 U 0000 "Active code page: %1",CR,LF
|
|
1025 U 0000 "NLSFUNC not installed",CR,LF
|
|
1027 U 0000 "Current drive is no longer valid"
|
|
1029 U 0000 "Label not found",CR,LF
|
|
1030 U 0000 "Syntax error",CR,LF
|
|
1032 U 0000 "Current date is %1 %2",CR,LF
|
|
1033 U 0000 "Sun Mon Tue Wed Thu Fri Sat "
|
|
1034 U 0000 "Enter new date (%1): "
|
|
1036 U 0000 "Current time is %1",CR,LF
|
|
1037 U 0000 "Enter new time: "
|
|
1038 U 0000 ", Delete (Y/N)?"
|
|
1039 U 0000 "All files in directory will be deleted!",CR,LF,"Are you sure (Y/N)?"
|
|
1040 U 0000 "MS-DOS Version %1.%2J"
|
|
1044 U 0000 "Invalid directory",CR,LF
|
|
1046 U 0000 "Invalid path, not directory,",CR,LF,"or directory not empty",CR,LF
|
|
1047 U 0000 "Must specify ON or OFF",CR,LF
|
|
1048 U 0000 "Directory of %1",CR,LF
|
|
1049 U 0000 "No Path",CR,LF
|
|
1050 U 0000 "Invalid drive in search path",CR,LF
|
|
1051 U 0000 "Invalid device",CR,LF
|
|
1052 U 0000 "FOR cannot be nested",CR,LF
|
|
1053 U 0000 "Intermediate file error during pipe",CR,LF
|
|
1054 U 0000 "Cannot do binary reads from a device",CR,LF
|
|
1055 U 0000 "BREAK is %1",CR,LF
|
|
1056 U 0000 "VERIFY is %1",CR,LF
|
|
1057 U 0000 "ECHO is %1",CR,LF
|
|
1059 U 0000 "off",0
|
|
1060 U 0000 "on",0
|
|
1061 U 0000 "Error writing to device",CR,LF
|
|
1063 U 0000 "%1"
|
|
1064 U 0000 "%1"
|
|
1065 U 0000 "%1"
|
|
1066 U 0000 "%1"
|
|
1067 U 0000 9
|
|
1068 U 0000 " <DIR> "
|
|
1069 U 0000 8," ",8
|
|
1070 U 0000 CR,LF
|
|
1071 U 0000 "%1"
|
|
1072 U 0000 "mm-dd-yy"
|
|
1073 U 0000 "dd-mm-yy"
|
|
1074 U 0000 "yy-mm-dd"
|
|
1075 U 0000 "%1 %2"
|
|
1076 U 0000 "%1"
|
|
1077 U 0000 " %1 %2"
|
|
1078 U 0000 "Directory already exists",CR,LF
|
|
1079 U 0000 "%1 bytes",CR,LF
|
|
1080 U 0000 "Total files listed:",CR,LF
|
|
1081 U 0000 "(Error occurred in environment variable)",CR,LF
|
|
1084 U 0000 "(continuing %1)"
|
|
1090 U 0000 "Revision %1 (KANJI Version)",CR,LF
|
|
1091 U 0000 "DOS is in ROM"
|
|
1092 U 0000 "DOS is in HMA"
|
|
1093 U 0000 "DOS is in low memory"
|
|
1094 U 0000 "Cannot Loadhigh batch file",CR,LF
|
|
1095 U 0000 "LoadHigh: Invalid filename",CR,LF
|
|
1096 U 0000 "Cannot open specified country information file",CR,LF
|
|
1300 U 0000 "Sets or clears extended CTRL+C checking.",CR,LF,CR,LF
|
|
"BREAK [ON | OFF]",CR,LF,CR,LF
|
|
"Type BREAK without a parameter to display the current BREAK setting.",CR,LF
|
|
1320 U 0000 "Displays or sets the active code page number.",CR,LF,CR,LF
|
|
"CHCP [nnn]",CR,LF,CR,LF
|
|
1321 U 0000 " nnn Specifies a code page number.",CR,LF,CR,LF
|
|
"Type CHCP without a parameter to display the active code page number.",CR,LF
|
|
1340 U 0000 "Displays the name of or changes the current directory.",CR,LF,CR,LF
|
|
"CHDIR [drive:][path]",CR,LF
|
|
"CHDIR[..]",CR,LF
|
|
1341 U 0000 "CD [drive:][path]",CR,LF
|
|
"CD[..]",CR,LF,CR,LF
|
|
" .. Specifies that you want to change to the parent directory.",CR,LF,CR,LF
|
|
1342 U 0000 "Type CD drive: to display the current directory in the specified drive.",CR,LF
|
|
"Type CD without parameters to display the current drive and directory.",CR,LF
|
|
1360 U 0000 "Clears the screen.",CR,LF,CR,LF
|
|
"CLS",CR,LF
|
|
1400 U 0000 "Copies one or more files to another location.",CR,LF,CR,LF
|
|
"COPY [/A | /B] source [/A | /B] [+ source [/A | /B] [+ ...]] [destination",CR,LF
|
|
" [/A | /B]] [/V]",CR,LF,CR,LF
|
|
1401 U 0000 " source Specifies the file or files to be copied.",CR,LF
|
|
" /A Indicates an ASCII text file.",CR,LF
|
|
1402 U 0000 " /B Indicates a binary file.",CR,LF
|
|
" destination Specifies the directory and/or filename for the new file(s).",CR,LF
|
|
1403 U 0000 " /V Verifies that new files are written correctly.",CR,LF,CR,LF
|
|
1404 U 0000 "To append files, specify a single file for destination, but multiple files",CR,LF
|
|
"for source (using wildcards or file1+file2+file3 format).",CR,LF
|
|
1420 U 0000 "Changes the terminal device used to control your system.",CR,LF,CR,LF
|
|
"CTTY device",CR,LF,CR,LF
|
|
" device The terminal device you want to use, such as COM1.",CR,LF
|
|
1440 U 0000 "Displays or sets the date.",CR,LF,CR,LF
|
|
"DATE [date]",CR,LF,CR,LF
|
|
1441 U 0000 "Type DATE without parameters to display the current date setting and",CR,LF
|
|
"a prompt for a new one. Press ENTER to keep the same date.",CR,LF
|
|
1460 U 0000 "Deletes one or more files.",CR,LF,CR,LF
|
|
"DEL [drive:][path]filename [/P]",CR,LF
|
|
"ERASE [drive:][path]filename [/P]",CR,LF,CR,LF
|
|
1461 U 0000 " [drive:][path]filename Specifies the file(s) to delete. Specify multiple",CR,LF
|
|
" files by using wildcards.",CR,LF
|
|
1462 U 0000 " /P Prompts for confirmation before deleting each file.",CR,LF
|
|
1480 U 0000 "Displays a list of files and subdirectories in a directory.",CR,LF,CR,LF
|
|
"DIR [drive:][path][filename] [/P] [/W] [/A[[:]attributes]]",CR,LF
|
|
" [/O[[:]sortorder]] [/S] [/B] [/L]",CR,LF,CR,LF
|
|
1481 U 0000 " [drive:][path][filename]",CR,LF
|
|
" Specifies drive, directory, and/or files to list.",CR,LF
|
|
1482 U 0000 " /P Pauses after each screenful of information.",CR,LF
|
|
" /W Uses wide list format.",CR,LF
|
|
1483 U 0000 " /A Displays files with specified attributes.",CR,LF
|
|
" attributes D Directories R Read-only files",CR,LF
|
|
1484 U 0000 " H Hidden files A Files ready for archiving",CR,LF
|
|
" S System files - Prefix meaning ""not""",CR,LF
|
|
" /O List by files in sorted order.",CR,LF
|
|
1485 U 0000 " sortorder N By name (alphabetic) S By size (smallest first)",CR,LF
|
|
" E By extension (alphabetic) D By date & time (earliest first)",CR,LF
|
|
1486 U 0000 " G Group directories first - Prefix to reverse order",CR,LF
|
|
" /S Displays files in specified directory and all subdirectories.",CR,LF
|
|
1487 U 0000 " /B Uses bare format (no heading information or summary).",CR,LF
|
|
" /L Uses lowercase.",CR,LF,CR,LF
|
|
1488 U 0000 "Switches may be preset in the DIRCMD environment variable. Override",CR,LF
|
|
"preset switches by prefixing any switch with - (hyphen)--for example, /-W.",CR,LF
|
|
1500 U 0000 "Quits the COMMAND.COM program (command interpreter).",CR,LF,CR,LF
|
|
"EXIT",CR,LF
|
|
1520 U 0000 "Creates a directory.",CR,LF,CR,LF
|
|
"MKDIR [drive:]path",CR,LF
|
|
"MD [drive:]path",CR,LF
|
|
1540 U 0000 "Displays or sets a search path for executable files.",CR,LF,CR,LF
|
|
"PATH [[drive:]path[;...]]",CR,LF
|
|
"PATH ;",CR,LF,CR,LF
|
|
1541 U 0000 "Type PATH ; to clear all search-path settings and direct MS-DOS to search",CR,LF
|
|
"only in the current directory.",CR,LF
|
|
1542 U 0000 "Type PATH without parameters to display the current path.",CR,LF
|
|
1560 U 0000 "Changes the MS-DOS command prompt.",CR,LF,CR,LF
|
|
"PROMPT [text]",CR,LF,CR,LF
|
|
1561 U 0000 " text Specifies a new command prompt.",CR,LF,CR,LF
|
|
"Prompt can be made up of normal characters and the following special codes:",CR,LF,CR,LF
|
|
1562 U 0000 " $Q = (equal sign)",CR,LF
|
|
" $$ $ (dollar sign)",CR,LF
|
|
1563 U 0000 " $T Current time",CR,LF
|
|
" $D Current date",CR,LF
|
|
1564 U 0000 " $P Current drive and path",CR,LF
|
|
" $V MS-DOS version number",CR,LF
|
|
1565 U 0000 " $N Current drive",CR,LF
|
|
" $G > (greater-than sign)",CR,LF
|
|
1566 U 0000 " $L < (less-than sign)",CR,LF
|
|
" $B | (pipe)",CR,LF
|
|
1567 U 0000 " $H Backspace (erases previous character)",CR,LF
|
|
" $E Escape code (ASCII code 27)",CR,LF
|
|
" $_ Carriage return and linefeed",CR,LF,CR,LF
|
|
1568 U 0000 "Type PROMPT without parameters to reset the prompt to the default setting.",CR,LF
|
|
1580 U 0000 "Removes (deletes) a directory.",CR,LF,CR,LF
|
|
"RMDIR [drive:]path",CR,LF
|
|
"RD [drive:]path",CR,LF
|
|
1600 U 0000 "Renames a file or files.",CR,LF,CR,LF
|
|
1601 U 0000 "RENAME [drive:][path]filename1 filename2",CR,LF
|
|
"REN [drive:][path]filename1 filename2",CR,LF,CR,LF
|
|
1602 U 0000 "Note that you cannot specify a new drive or path for your destination file.",CR,LF
|
|
1620 U 0000 "Displays, sets, or removes MS-DOS environment variables.",CR,LF,CR,LF
|
|
"SET [variable=[string]]",CR,LF,CR,LF
|
|
1621 U 0000 " variable Specifies the environment-variable name.",CR,LF
|
|
" string Specifies a series of characters to assign to the variable.",CR,LF,CR,LF
|
|
1622 U 0000 "Type SET without parameters to display the current environment variables.",CR,LF
|
|
1640 U 0000 "Displays or sets the system time.",CR,LF,CR,LF
|
|
"TIME [time]",CR,LF,CR,LF
|
|
1641 U 0000 "Type TIME with no parameters to display the current time setting and a prompt",CR,LF
|
|
"for a new one. Press ENTER to keep the same time.",CR,LF
|
|
1660 U 0000 "Displays the contents of a text file.",CR,LF,CR,LF
|
|
"TYPE [drive:][path]filename",CR,LF
|
|
1680 U 0000 "Displays the MS-DOS version.",CR,LF,CR,LF
|
|
"VER",CR,LF
|
|
1700 U 0000 "Tells MS-DOS whether to verify that your files are written correctly to a",CR,LF
|
|
"disk.",CR,LF,CR,LF
|
|
"VERIFY [ON | OFF]",CR,LF,CR,LF
|
|
"Type VERIFY without a parameter to display the current VERIFY setting.",CR,LF
|
|
1720 U 0000 "Displays the disk volume label and serial number, if they exist.",CR,LF,CR,LF
|
|
"VOL [drive:]",CR,LF
|
|
1740 U 0000 "Calls one batch program from another.",CR,LF,CR,LF
|
|
"CALL [drive:][path]filename [batch-parameters]",CR,LF,CR,LF
|
|
1741 U 0000 " batch-parameters Specifies any command-line information required by the",CR,LF
|
|
" batch program.",CR,LF
|
|
1760 U 0000 "Records comments (remarks) in a batch file or CONFIG.SYS.",CR,LF,CR,LF
|
|
"REM [comment]",CR,LF
|
|
1780 U 0000 "Suspends processing of a batch program and displays the message ""Press any",CR,LF
|
|
"key to continue....""",CR,LF,CR,LF
|
|
"PAUSE",CR,LF
|
|
1800 U 0000 "Displays messages, or turns command-echoing on or off.",CR,LF,CR,LF
|
|
" ECHO [ON | OFF]",CR,LF
|
|
1801 U 0000 " ECHO [message]",CR,LF,CR,LF
|
|
"Type ECHO without parameters to display the current echo setting.",CR,LF
|
|
1820 U 0000 "Directs MS-DOS to a labelled line in a batch program.",CR,LF,CR,LF
|
|
"GOTO label",CR,LF,CR,LF
|
|
1821 U 0000 " label Specifies a text string used in the batch program as a label.",CR,LF,CR,LF
|
|
"You type a label on a line by itself, beginning with a colon.",CR,LF
|
|
1840 U 0000 "Changes the position of replaceable parameters in a batch file.",CR,LF,CR,LF
|
|
"SHIFT",CR,LF
|
|
1860 U 0000 "Performs conditional processing in batch programs.",CR,LF,CR,LF
|
|
"IF [NOT] ERRORLEVEL number command",CR,LF
|
|
1861 U 0000 "IF [NOT] string1==string2 command",CR,LF
|
|
"IF [NOT] EXIST filename command",CR,LF,CR,LF
|
|
1862 U 0000 " NOT Specifies that MS-DOS should carry out the command only",CR,LF
|
|
" if the condition is false.",CR,LF
|
|
1863 U 0000 " ERRORLEVEL number Specifies a true condition if the last program run returned",CR,LF
|
|
" an exit code equal to or greater than the number specified.",CR,LF
|
|
1864 U 0000 " command Specifies the command to carry out if the condition is",CR,LF
|
|
" met.",CR,LF
|
|
1865 U 0000 " string1==string2 Specifies a true condition if the specified text strings",CR,LF
|
|
" match.",CR,LF
|
|
1866 U 0000 " EXIST filename Specifies a true condition if the specified filename",CR,LF
|
|
" exists.",CR,LF
|
|
1880 U 0000 "Runs a specified command for each file in a set of files.",CR,LF,CR,LF
|
|
"FOR %variable IN (set) DO command [command-parameters]",CR,LF,CR,LF
|
|
1881 U 0000 " %variable Specifies a replaceable parameter.",CR,LF
|
|
" (set) Specifies a set of one or more files. Wildcards may be used.",CR,LF
|
|
1882 U 0000 " command Specifies the command to carry out for each file.",CR,LF
|
|
" command-parameters",CR,LF
|
|
1883 U 0000 " Specifies parameters or switches for the specified command.",CR,LF,CR,LF
|
|
"To use the FOR command in a batch program, specify %%variable instead of",CR,LF
|
|
"%variable.",CR,LF
|
|
1900 U 0000 "Reserved command name",CR,LF
|
|
1920 U 0000 "Loads a program into the upper memory area.",CR,LF,CR,LF
|
|
1921 U 0000 "LOADHIGH [drive:][path]filename [parameters]",CR,LF
|
|
"LH [drive:][path]filename [parameters]",CR,LF,CR,LF
|
|
1922 U 0000 " parameters Specifies any command-line information required by the",CR,LF
|
|
" program you want to load.",CR,LF
|
|
ANSI 000046c0 0001
|
|
0010 U 0000 "Invalid parameter - %1",CR,LF
|
|
APPEND 00004704 0026
|
|
0001 U 0000 "Incorrect APPEND version",CR,LF
|
|
0002 U 0000 "Invalid path",CR,LF
|
|
0003 U 0000 "Invalid parameter",CR,LF
|
|
0004 U 0000 "Invalid combination of parameters",CR,LF
|
|
0005 U 0000 "No Append",CR,LF
|
|
0006 U 0000 "APPEND / ASSIGN Conflict",CR,LF
|
|
0007 U 0000 "APPEND / TopView Conflict",CR,LF
|
|
0008 U 0000 "Incorrect DOS version",CR,LF
|
|
0009 U 0000 "APPEND already installed",CR,LF
|
|
0300 U 0000 "Allows programs to open data files in specified directories as if they were in",CR,LF
|
|
0301 U 0000 "the current directory.",CR,LF,CR,LF
|
|
0302 U 0000 "APPEND [[drive:]path[;...]] [/X[:ON | :OFF]] [/PATH:ON | /PATH:OFF] [/E]",CR,LF
|
|
0303 U 0000 "APPEND ;",CR,LF,CR,LF
|
|
0304 U 0000 " [drive:]path Specifies a drive and directory to append.",CR,LF
|
|
0305 U 0000 " /X:ON Applies appended directories to file searches and",CR,LF
|
|
0306 U 0000 " application execution.",CR,LF
|
|
0307 U 0000 " /X:OFF Applies appended directories only to requests to open files.",CR,LF
|
|
0308 U 0000 " /X:OFF is the default setting.",CR,LF
|
|
0309 U 0000 " /PATH:ON Applies appended directories to file requests that already",CR,LF
|
|
0310 U 0000 " specify a path. /PATH:ON is the default setting.",CR,LF
|
|
0311 U 0000 " /PATH:OFF Turns off the effect of /PATH:ON.",CR,LF
|
|
0312 U 0000 " /E Stores a copy of the appended directory list in an environment",CR,LF
|
|
0313 U 0000 " variable named APPEND. /E may be used only the first time",CR,LF
|
|
0314 U 0000 " you use APPEND after starting your system.",CR,LF,CR,LF
|
|
0315 U 0000 "Type APPEND ; to clear the appended directory list.",CR,LF
|
|
0316 U 0000 "Type APPEND without parameters to display the appended directory list.",CR,LF
|
|
ASSIGN 00004df2 0007
|
|
0002 U 0000 "Original %1: set to %2:",cr,lf
|
|
0300 U 0000 "Redirects requests for disk operations on one drive to a different drive.",CR,LF,CR,LF
|
|
0301 U 0000 "ASSIGN [x[:]=y[:][...]]",CR,LF
|
|
"ASSIGN /STATUS",CR,LF,CR,LF
|
|
0302 U 0000 " x Specifies the drive letter to reassign.",CR,LF
|
|
0303 U 0000 " y Specifies the drive that x: will be assigned to.",CR,LF
|
|
0304 U 0000 " /STATUS Displays current drive assignments.",CR,LF,CR,LF
|
|
0305 U 0000 "Type ASSIGN without parameters to reset all drive letters to original",CR,LF
|
|
"assignments.",CR,LF
|
|
ATTRIB 0000503d 0027
|
|
0004 U 0000 "Invalid number of parameters",CR,LF
|
|
0005 U 0000 "Invalid path or file not found",CR,LF
|
|
0006 U 0000 "Syntax error",CR,LF
|
|
0008 U 0000 " %1"
|
|
0009 U 0000 "%1 %2",CR,LF
|
|
0010 U 0000 "%1",CR,LF,"%2",CR,LF
|
|
0011 U 0000 "%1, Code page mismatch",CR,LF,"Are you sure (Y/N)?"
|
|
0012 U 0000 "%1",CR,LF
|
|
0014 U 0000 CR,LF
|
|
0015 U 0000 "Invalid file type value",CR,LF
|
|
0199 U 0000 "Extended attribute error",CR,LF
|
|
0201 U 0000 "Extended attribute name not found",CR,LF
|
|
0204 U 0000 "Extended attribute name cannot be set",CR,LF
|
|
0205 U 0000 "Extended attribute name known to this file system but not supported",CR,LF
|
|
0206 U 0000 "Extended attribute type mismatch",CR,LF
|
|
0208 U 0000 "Extended attribute value not supported",CR,LF
|
|
0216 U 0000 "Not resetting system file %1",CR,LF
|
|
0217 U 0000 "Not resetting hidden file %1",CR,LF
|
|
0300 U 0000 "Displays or changes file attributes.",CR,LF,CR,LF
|
|
0301 U 0000 "ATTRIB [+R | -R] [+A | -A] [+S | -S] [+H | -H] [[drive:][path]filename] [/S]",CR,LF,CR,LF
|
|
0302 U 0000 " + Sets an attribute.",CR,LF
|
|
0303 U 0000 " - Clears an attribute.",CR,LF
|
|
0304 U 0000 " R Read-only file attribute.",CR,LF
|
|
0305 U 0000 " A Archive file attribute.",CR,LF
|
|
0306 U 0000 " S System file attribute.",CR,LF
|
|
0307 U 0000 " H Hidden file attribute.",CR,LF
|
|
0308 U 0000 " /S Processes files in all directories in the specified path.",CR,LF
|
|
BACKUP 000055c2 0040
|
|
0002 U 0000 CR,LF,"Insufficient memory",CR,LF
|
|
0006 U 0000 CR,LF,"Invalid drive specification",CR,LF
|
|
0014 U 0000 CR,LF,"Source and target drives are the same",CR,LF
|
|
0015 U 0001 CR,LF,"Error executing FORMAT",CR,LF
|
|
0016 U 0001 CR,LF,"Cannot find FORMAT.COM",CR,LF
|
|
0017 U 0000 CR,LF,"Error opening logfile",CR,LF
|
|
0018 U 0000 CR,LF,"Logging to file %1",CR,LF
|
|
0019 U 0000 CR,LF,"Last backup diskette not inserted",CR,LF
|
|
0020 U 0000 CR,LF,"WARNING! Files in the target drive",CR,LF
|
|
"%1:\ root directory will be erased",CR,LF
|
|
0021 U 0000 CR,LF,"WARNING! Files in the target drive",CR,LF
|
|
"%1:\BACKUP directory will be erased",CR,LF
|
|
0022 U 0000 CR,LF,"*** Backing up files to drive %1: ***",CR,LF
|
|
0023 U 0000 "Diskette Number: %1",CR,LF
|
|
0024 U 0000 CR,LF,"WARNING! No files were found to back up",CR,LF
|
|
0025 U 0000 CR,LF,"Insert backup source diskette in drive %1:",CR,LF
|
|
0026 U 0000 CR,LF,"Insert backup diskette %1 in drive %2:",CR,LF
|
|
0027 U 0000 CR,LF,"*** Not able to backup file ***",CR,LF
|
|
0028 U 0000 CR,LF,"Insert last backup diskette in drive %1:",CR,LF
|
|
0029 U 0000 CR,LF,"Target cannot be used for backup",CR,LF
|
|
0030 U 0000 CR,LF,"*** Last file not backed up ***",CR,LF
|
|
0031 U 0000 CR,LF,"Fixed backup device %1: is full",CR,LF
|
|
0032 U 0000 CR,LF,"Disk full error writing to BACKUP Log File",CR,LF
|
|
0034 U 0000 CR,LF
|
|
0035 U 0001 CR,LF,"Cannot FORMAT nonremovable drive %1:",CR,LF
|
|
0040 U 0000 CR, LF, "Because your source drive is either ASSIGNed, JOINed, or SUBSTed", CR, LF, "it is actually the same as the target drive", CR, LF
|
|
0041 U 0000 CR, LF, "Because your target drive is either ASSIGNed, JOINed, or SUBSTed", CR, LF, "it is actually the same as the source drive", CR, LF
|
|
0042 U 0000 "Your target diskette is unformatted and "
|
|
0043 U 0000 "No FORMAT program was found.",CR,LF
|
|
"Do you have another diskette with FORMAT on it (Y/N)? "
|
|
0044 U 0000 CR,LF,"Insert the diskette with FORMAT in drive A:",CR,LF
|
|
0045 U 0000 CR,LF,"Do you want to continue by inserting a new disk (Y/N)? "
|
|
0300 U 0000 "Backs up one or more files from one disk to another.",CR,LF,CR,LF
|
|
0301 U 0000 "BACKUP source destination-drive: [/S] [/M] [/A] [/F[:size]]",CR,LF
|
|
" [/D:date[/T:time]] [/L[:[drive:][path]logfile]]",CR,LF,CR,LF
|
|
0302 U 0000 " source Specifies the file(s), drive, or directory to back up.",CR,LF
|
|
0303 U 0000 " destination-drive: Specifies the drive to save backup copies onto.",CR,LF
|
|
0304 U 0000 " /S Backs up contents of subdirectories.",CR,LF
|
|
0305 U 0000 " /M Backs up only files that have changed since the last",CR,LF
|
|
" backup.",CR,LF
|
|
0306 U 0000 " /A Adds backup files to an existing backup disk.",CR,LF
|
|
0307 U 0000 " /F:[size] Specifies the size of the disk to be formatted.",CR,LF
|
|
0308 U 0000 " /D:date Backs up only files changed on or after the specified",CR,LF
|
|
" date.",CR,LF
|
|
0309 U 0000 " /T:time Backs up only files changed at or after the specified",CR,LF
|
|
" time.",CR,LF
|
|
0310 U 0000 " /L[:[drive:][path]logfile]",CR,LF
|
|
" Creates a log file and entry to record the backup",CR,LF
|
|
" operation.",CR,LF
|
|
BASIC 0000629a 0001
|
|
0001 U 0001 "Cannot exec BASICA.COM"
|
|
BOOT 000062d8 0001
|
|
0001 U 0000 13,10,"Non-System disk or disk error",13,10
|
|
"Replace and press any key when ready",13,10,0
|
|
CHKDSK 0000635a 0071
|
|
0003 U 0000 "Convert lost chains to files (Y/N)?"
|
|
0004 U 0000 "Unrecoverable error in directory"
|
|
0005 U 0000 "Convert directory to file (Y/N)?"
|
|
0007 U 0000 "%1 bytes total disk space"
|
|
0008 U 0000 "%1 bytes in bad sectors"
|
|
0009 U 0000 "%1 bytes in %2 hidden files"
|
|
0010 U 0000 "%1 bytes in %2 directories"
|
|
0011 U 0000 "%1 bytes in %2 user files"
|
|
0012 U 0000 "%1 bytes in %2 recovered files"
|
|
0013 U 0000 "%1 bytes would be in %2 recovered files"
|
|
0014 U 0000 "%1 bytes available on disk"
|
|
0015 U 0000 "%1 total bytes memory"
|
|
0016 U 0000 "%1 bytes free"
|
|
0017 U 0000 "Cannot CHKDSK a network drive"
|
|
0018 U 0000 "Cannot CHKDSK a SUBSTed or ASSIGNed drive"
|
|
0019 U 0000 "Probable non-DOS disk",CR,LF,"Continue (Y/N)?"
|
|
0020 U 0000 "Disk error reading FAT %1",CR,LF
|
|
0021 U 0000 "Directory %1"
|
|
0022 U 0000 "%1 Contains %2 non-contiguous blocks"
|
|
0023 U 0000 "All specified file(s) are contiguous"
|
|
0024 U 0000 "Errors found, F parameter not specified",CR,LF,"Corrections will not be written to disk"
|
|
0025 U 0000 " Processing cannot continue %1%2"
|
|
0026 U 0000 " File allocation table bad, drive %1"
|
|
0029 U 0000 " CHDIR .. failed, trying alternate method"
|
|
0030 U 0001 " Has invalid allocation unit, file truncated"
|
|
0031 U 0000 " Invalid sub-directory entry"
|
|
0032 U 0000 " Does not exist"
|
|
0033 U 0001 " First allocation unit is invalid, entry truncated"
|
|
0034 U 0000 " Allocation error, size adjusted"
|
|
0035 U 0000 " Cannot recover .. entry, processing continued"
|
|
0036 U 0000 " Directory is totally empty, no . or .."
|
|
0037 U 0000 " Directory is joined"
|
|
0038 U 0000 " Cannot recover .. entry"
|
|
0039 U 0000 " Entry has a bad link"
|
|
0040 U 0000 " Entry has a bad attribute"
|
|
0041 U 0000 " Entry has a bad size"
|
|
0042 U 0001 " Is cross linked on allocation unit %1"
|
|
0043 U 0000 " Cannot CHDIR to %1,",CR,LF,"tree past this point not processed"
|
|
0044 U 0000 " tree past this point not processed"
|
|
0045 U 0000 "%1 bytes disk space freed"
|
|
0046 U 0000 "%1 bytes disk space would be freed"
|
|
0047 U 0000 "Volume %1 created %2 %3",CR,LF
|
|
0048 U 0000 "%1 total allocation units on disk"
|
|
0049 U 0000 "%1 bytes in each allocation unit"
|
|
0050 U 0000 "CHKDSK not available on drive %1"
|
|
0053 U 0000 "Invalid parameter"
|
|
0055 U 0000 "Path not found"
|
|
0056 U 0000 "File not found"
|
|
0058 U 0001 " %1 lost allocation units found in %2 chains."
|
|
0059 U 0000 CR,LF
|
|
0060 U 0000 " Cannot CHDIR to root",CR,LF
|
|
0061 U 0000 " Disk error writing FAT %1"
|
|
0062 U 0000 "%1" ;C05
|
|
0063 U 0000 "Invalid current directory",0
|
|
0064 U 0000 "%1",CR,LF
|
|
0065 U 0000 " Insufficient room in root directory",CR,LF," Move files from root directory and repeat CHKDSK"
|
|
0066 U 0000 "%1 %2 %3"
|
|
0067 U 0000 "%1 %2, %3"
|
|
0068 U 0000 "%1%2%3%4%5"
|
|
0069 U 0000 "%1%2%3%4"
|
|
0070 U 0000 "%1 available allocation units on disk"
|
|
0075 U 0000 "CHKDSK /F cannot be done in a Windows/DosShell Command Prompt",CR,LF
|
|
0076 U 0000 " - Insufficient Memory",0
|
|
0077 U 0000 " - File allocation table bad",0
|
|
0300 U 0000 "Checks a disk and displays a status report.",CR,LF,CR,LF
|
|
0301 U 0000 "CHKDSK [drive:][[path]filename] [/F] [/V]",CR,LF,CR,LF
|
|
0302 U 0000 " [drive:][path] Specifies the drive and directory to check.",CR,LF
|
|
0303 U 0000 " filename Specifies the file(s) to check for fragmentation.",CR,LF
|
|
0304 U 0000 " /F Fixes errors on the disk.",CR,LF
|
|
0305 U 0000 " /V Displays the full path and name of every file on the disk.",CR,LF,CR,LF
|
|
0306 U 0000 "Type CHKDSK without parameters to check the current disk.",CR,LF
|
|
DEBUG 000071a0 0068
|
|
0004 U 0000 "Allocation failed or specified buffer too small",CR,LF
|
|
0006 U 0000 "Bad device name"
|
|
0007 U 0000 "Cannot open list device PRN",CR,LF
|
|
"Enter name of list device? "
|
|
0008 U 0000 CR,LF
|
|
0009 U 0000 CR,LF,"Program terminated normally",CR,LF
|
|
0010 U 0001 "Invalid drive specification",CR,LF
|
|
0012 U 0001 "File creation error",CR,LF
|
|
0013 U 0001 "Insufficient space on disk",CR,LF
|
|
0014 U 0001 "Disk error reading drive %1",CR,LF
|
|
0015 U 0001 "Disk error writing drive %1",CR,LF
|
|
0016 U 0001 "Write protect error reading drive %1",CR,LF
|
|
0017 U 0001 "Write protect error writing drive %1",CR,LF
|
|
0019 U 0000 "%1^ Error"
|
|
0020 U 0001 "Error in EXE or HEX file",CR,LF
|
|
0021 U 0001 "EXE and HEX files cannot be written",CR,LF
|
|
0022 U 0000 "EXEC failure"
|
|
0023 U 0001 "(W)rite error, no destination defined",CR,LF
|
|
0024 U 0001 "Access denied",CR,LF
|
|
0025 U 0000 "Parity error or nonexistent memory error detected"
|
|
0026 U 0000 "-"
|
|
0027 U 0000 "%1 -"
|
|
0032 U 0000 "%1%2"
|
|
0033 U 0000 "%1:%2 %3"
|
|
0034 U 0000 "%1 %2"
|
|
0035 U 0000 "%1 %2",CR,LF,":"
|
|
0036 U 0000 "%1=%2 "
|
|
0037 U 0000 "%1 Error"
|
|
0038 U 0000 "Writing %2%1 bytes" ;C02
|
|
0039 U 0000 "%1:%2="
|
|
0040 U 0000 "%1"
|
|
0041 U 0000 "%1"
|
|
0042 U 0000 "%1:%2 %3 %4 %5:%6"
|
|
0044 U 0000 32,8
|
|
0046 U 0000 "%1"
|
|
0047 U 0000 "%1"
|
|
0050 U 0000 "%1 of a total %2 EMS pages have been allocated",cr,lf
|
|
0051 U 0000 "%1 of a total %2 EMS handles have been allocated",cr,lf
|
|
0055 U 0000 "Handle created = %1 ",cr,lf
|
|
0056 U 0000 "Logical page %1 mapped to physical page %2 ",cr,lf
|
|
0057 U 0001 "EMS hardware/software failure",cr,lf
|
|
0058 U 0000 "Handle not found",cr,lf
|
|
0059 U 0000 "Invalid function code",cr,lf
|
|
0060 U 0000 "No free handles",cr,lf
|
|
0061 U 0000 "Save/Restore error",cr,lf
|
|
0062 U 0000 "Total pages exceeded",cr,lf
|
|
0063 U 0000 "Free pages exceeded",cr,lf
|
|
0064 U 0000 "Parameter error",cr,lf
|
|
0065 U 0000 "Logical Page out of range",cr,lf
|
|
0066 U 0000 "Physical Page out of range",cr,lf
|
|
0067 U 0000 "Save area already in use",cr,lf
|
|
0068 U 0000 "Save area not in use",cr,lf
|
|
0070 U 0001 "General EMS error",cr,lf
|
|
0071 U 0000 "Missing or invalid EMS parameter",cr,lf
|
|
0072 U 0000 "Handle %1 has %2 pages allocated",cr,lf
|
|
0075 U 0000 "Physical page %1 = Frame segment %2",cr,lf
|
|
0076 U 0003 "Handle %1 deallocated",cr,lf
|
|
0078 U 0000 "EMS not installed",cr,lf
|
|
0090 U 0000 "Runs Debug, a program testing and editing tool.",cr,lf,cr,lf
|
|
0091 U 0000 "DEBUG [[drive:][path]filename [testfile-parameters]]",cr,lf,cr,lf
|
|
0092 U 0000 " [drive:][path]filename Specifies the file you want to test.", cr,lf
|
|
0093 U 0000 " testfile-parameters Specifies command-line information required by",cr,lf
|
|
" the file you want to test.",cr,lf,cr,lf
|
|
0094 U 0000 "After Debug starts, type ? to display a list of debugging commands.",cr,lf
|
|
0100 U 0000 "assemble A [address]",CR,LF
|
|
"compare C range address",CR,LF
|
|
"dump D [range]",CR,LF
|
|
"enter E address [list]",CR,LF
|
|
0101 U 0000 "fill F range list",CR,LF
|
|
"go G [=address] [addresses]",CR,LF
|
|
"hex H value1 value2",CR,LF
|
|
"input I port",CR,LF
|
|
0102 U 0000 "load L [address] [drive] [firstsector] [number]",CR,LF
|
|
"move M range address",CR,LF
|
|
"name N [pathname] [arglist]",CR,LF
|
|
"output O port byte",CR,LF
|
|
0103 U 0000 "proceed P [=address] [number]",CR,LF
|
|
"quit Q",CR,LF
|
|
"register R [register]",CR,LF
|
|
"search S range list",CR,LF
|
|
0104 U 0000 "trace T [=address] [value]",CR,LF
|
|
"unassemble U [range]",CR,LF
|
|
"write W [address] [drive] [firstsector] [number]",CR,LF
|
|
0105 U 0000 "allocate expanded memory XA [#pages]",CR,LF
|
|
"deallocate expanded memory XD [handle]",CR,LF
|
|
"map expanded memory pages XM [Lpage] [Ppage] [handle]",CR,LF
|
|
"display expanded memory status XS",CR,LF
|
|
DISKCOMP 0000810a 0020
|
|
0004 U 0000 "Do not specify filename(s)",CR,LF
|
|
"Command format: DISKCOMP [drive1: [drive2:]] [/1] [/8]",LF,CR
|
|
0005 U 0000 CR,LF,"Invalid drive specification",CR,LF
|
|
"Specified drive does not exist",CR,LF
|
|
"or is non-removable",CR,LF
|
|
0006 U 0000 CR,LF,"Cannot DISKCOMP to or from",CR,LF
|
|
"a network drive",CR,LF
|
|
0007 U 0000 CR,LF,"Insert FIRST diskette in drive %1:",CR,LF
|
|
0008 U 0000 CR,LF,"Insert SECOND diskette in drive %1:",CR,LF
|
|
0009 U 0000 CR,LF,"FIRST diskette bad or incompatible",CR,LF
|
|
0010 U 0000 CR,LF,"SECOND diskette bad or incompatible",CR,LF
|
|
0014 U 0000 CR,LF,"Compare another diskette (Y/N) ?"
|
|
0015 U 0000 CR,LF,"Comparing %1 tracks",CR,LF
|
|
"%2 sectors per track, %3 side(s)",CR,LF
|
|
0016 U 0000 CR,LF,"Drive types or diskette types",CR,LF
|
|
"not compatible",CR,LF
|
|
0017 U 0000 CR,LF,"Unrecoverable read error on drive %2",CR,LF
|
|
"side %3, track %4",CR,LF
|
|
0018 U 0000 CR,LF,"Compare error on",CR,LF,"side %3, track %4",CR,LF
|
|
0019 U 0000 "Make sure a diskette is inserted into",CR,LF
|
|
"the drive and the door is closed",CR,LF
|
|
0020 U 0000 CR,LF,"Compare process ended",CR,LF
|
|
0021 U 0000 CR,LF,"Compare OK",CR,LF
|
|
0022 U 0000 CR,LF
|
|
0300 U 0000 "Compares the contents of two floppy disks.",CR,LF,CR,LF
|
|
0301 U 0000 "DISKCOMP [drive1: [drive2:]] [/1] [/8]",CR,LF,CR,LF
|
|
0302 U 0000 " /1 Compares the first side of the disks.",CR,LF
|
|
0303 U 0000 " /8 Compares only the first eight sectors of each track.",CR,LF
|
|
DISKCOPY 000086ca 0025
|
|
0002 U 0000 CR,LF
|
|
0004 U 0000 "Do not specify filename(s)",CR,LF
|
|
"Command Format: DISKCOPY [drive1: [drive2:]] [/1] [/V]",CR,LF
|
|
0005 U 0000 CR,LF,"Invalid drive specification",CR,LF
|
|
"Specified drive does not exist",CR,LF
|
|
"or is non-removable",CR,LF
|
|
0006 U 0000 CR,LF,"Cannot DISKCOPY to or from",CR,LF
|
|
"a network drive",CR,LF
|
|
0007 U 0000 CR,LF,"Formatting while copying",CR,LF
|
|
0008 U 0000 CR,LF,"Insert SOURCE diskette in drive %1:",CR,LF
|
|
0009 U 0000 CR,LF,"Insert TARGET diskette in drive %1:",CR,LF
|
|
0010 U 0000 "Make sure a diskette is inserted into",CR,LF
|
|
"the drive and the door is closed",CR,LF
|
|
0011 U 0000 CR,LF,"Target diskette may be unusable",CR,LF
|
|
0012 U 0000 CR,LF,"Target diskette unusable",CR,LF
|
|
0016 U 0000 CR,LF,"Copy another diskette (Y/N)? "
|
|
0017 U 0000 CR,LF,"Copying %1 tracks",CR,LF
|
|
"%2 sectors per track, %3 side(s)",CR,LF
|
|
0018 U 0000 CR,LF,"Drive types or diskette types",CR,LF
|
|
"not compatible",CR,LF
|
|
0019 U 0000 CR,LF,"Unrecoverable read error on drive %1",CR,LF
|
|
"Side %2, track %3",CR,LF
|
|
0020 U 0000 CR,LF,"Unrecoverable write error on drive %1",CR,LF
|
|
"Side %2, track %3",CR,LF
|
|
0021 U 0000 CR,LF,"Copy process ended",CR,LF
|
|
0022 U 0000 CR,LF,"SOURCE diskette bad or incompatible"
|
|
0023 U 0000 CR,LF,"TARGET diskette bad or incompatible"
|
|
0030 U 0000 CR,LF,"TARGET media has lower capacity than SOURCE",CR,LF
|
|
"Continue anyway (Y/N)?"
|
|
0031 U 0000 CR,LF,"Press CTRL+C to abort,",CR,LF
|
|
"or correct this problem and press any other key to continue . . .",CR,LF
|
|
0300 U 0000 "Copies the contents of one floppy disk to another.",CR,LF,CR,LF
|
|
0301 U 0000 "DISKCOPY [drive1: [drive2:]] [/1] [/V]",CR,LF,CR,LF
|
|
0302 U 0000 " /1 Copies only the first side of the disk.",CR,LF
|
|
0303 U 0000 " /V Verifies that the information is copied correctly.",CR,LF,CR,LF
|
|
0304 U 0000 "The two floppy disks must be the same type.",CR,LF
|
|
"You may specify the same drive for drive1 and drive2.",CR,LF
|
|
DISPLAY 00008e7b 0003
|
|
0002 U 0000 "%1 code page driver cannot be initialized",CR,LF,BELL
|
|
0008 U 0000 "Too many code pages specified",CR,LF,BELL
|
|
0012 U 0000 "Invalid syntax on DISPLAY.SYS code page driver",CR,LF,BELL
|
|
DOSKEY 00008f58 0010
|
|
0001 U 0000 7,"An incompatible DOSKey is already installed.$"
|
|
0002 U 0000 7,"Cannot change BUFSIZE.$"
|
|
0003 U 0000 "DOSKey installed.$"
|
|
0004 U 0000 "Invalid macro definition.$"
|
|
0005 U 0000 "Edits command lines, recalls MS-DOS commands, and creates macros.",CR,LF,CR,LF
|
|
"DOSKEY [/REINSTALL] [/BUFSIZE=size] [/MACROS] [/HISTORY]",CR,LF
|
|
" [/INSERT | /OVERSTRIKE] [macroname=[text]]",CR,LF,CR,LF
|
|
" /REINSTALL Installs a new copy of Doskey.",CR,LF
|
|
" /BUFSIZE=size Sets size of command history buffer.",CR,LF
|
|
" /MACROS Displays all Doskey macros.",CR,LF
|
|
" /HISTORY Displays all commands stored in memory.",CR,LF
|
|
" /INSERT Specifies that new text you type is inserted in old text.",CR,LF
|
|
" /OVERSTRIKE Specifies that new text overwrites old text.",CR,LF
|
|
" macroname Specifies a name for a macro you create.",CR,LF
|
|
" text Specifies commands you want to record.",CR,LF,CR,LF
|
|
"UP and DOWN ARROWS recall commands; ESC clears command line; F7 displays",CR,LF
|
|
"command history; ALT+F7 clears command history; F8 searches command",CR,LF
|
|
"history; F9 selects a command by number; ALT+F10 clears macro definitions.",CR,LF,CR,LF
|
|
"The following are some special codes in Doskey macro definitions:",CR,LF
|
|
"$T Command separator. Allows multiple commands in a macro.",CR,LF
|
|
"$1-$9 Batch parameters. Equivalent to %1-%9 in batch programs.",CR,LF
|
|
"$* Symbol replaced by everything following macro name on command line.",CR,LF,0
|
|
0006 U 0000 7,"Insufficent memory to store macro. Use the DOSKEY command with the /BUFSIZE",CR,LF
|
|
"switch to increase available memory.$",0
|
|
0007 U 0000 7,"Incorrect DOS version$"
|
|
0008 U 0000 CR,LF,'$'
|
|
0020 U 0000 CR,LF,"-- More --",0
|
|
0021 U 0000 "Line number: ",0
|
|
DRIVER 00009659 0002
|
|
0002 U 0000 "No drive specified",CR,LF
|
|
0003 U 0000 "Loaded External Disk Driver for Drive %1",CR,LF
|
|
EDLIN 000096d7 0035
|
|
0006 U 0000 "*"
|
|
0007 U 0000 "Invalid drive or file name",CR,LF
|
|
0008 U 0000 "File name must be specified",CR,LF
|
|
0010 U 0000 "File is READ-ONLY",CR,LF
|
|
0011 U 0000 "File Creation Error",CR,LF
|
|
0012 U 0000 "Too many files open",CR,LF
|
|
0013 U 0000 "Read error in:",CR,LF,"%1",CR,LF
|
|
0014 U 0000 "Cannot edit .BAK file--rename file",CR,LF
|
|
0015 U 0000 "No room in directory for file",CR,LF
|
|
0016 U 0000 "Disk full. Edits lost.",CR,LF
|
|
0017 U 0000 "File not found",CR,LF
|
|
0018 U 0000 "Entry error",CR,LF
|
|
0019 U 0000 "New file",CR,LF
|
|
0020 U 0000 "Not found",CR,LF
|
|
0021 U 0000 "O.K.? "
|
|
0022 U 0000 "Line too long",CR,LF
|
|
0023 U 0000 "End of input file",CR,LF
|
|
0024 U 0000 "Abort edit (Y/N)? "
|
|
0025 U 0000 "Must specify destination line number",CR,LF
|
|
0026 U 0000 "Not enough room to merge the entire file",CR,LF
|
|
0027 U 0000 CR,LF
|
|
0028 U 0000 LF
|
|
0029 U 0000 "Continue (Y/N)?"
|
|
0030 U 0000 "Unable to print message",CR,LF
|
|
0031 U 0000 "%1"
|
|
0032 U 0000 "%1:%2"
|
|
0033 U 0000 "Cannot merge - code page mismatch",CR,LF
|
|
0300 U 0000 "Starts Edlin, a line-oriented text editor.",CR,LF,CR,LF
|
|
"EDLIN [drive:][path]filename [/B]",CR,LF,CR,LF
|
|
" /B Ignores end-of-file (CTRL+Z) characters.",CR,LF
|
|
0301 U 0000 "Edit line line#",CR,LF
|
|
"Append [#lines]A",CR,LF
|
|
0302 U 0000 "Copy [startline],[endline],toline[,times]C",CR,LF
|
|
"Delete [startline][,endline]D",CR,LF
|
|
0303 U 0000 "End (save file) E",CR,LF
|
|
"Insert [line]I",CR,LF
|
|
0304 U 0000 "List [startline][,endline]L",CR,LF
|
|
"Move [startline],[endline],tolineM",CR,LF
|
|
0305 U 0000 "Page [startline][,endline]P",CR,LF
|
|
"Quit (throw away changes) Q",CR,LF
|
|
0306 U 0000 "Replace [startline][,endline][?]R[oldtext][CTRL+Znewtext]",CR,LF
|
|
"Search [startline][,endline][?]Stext",CR,LF
|
|
0307 U 0000 "Transfer [toline]T[drive:][path]filename",CR,LF
|
|
"Write [#lines]W",CR,LF
|
|
EXE2BIN 00009f1b 0012
|
|
0002 U 0000 "Insufficient memory",CR,LF
|
|
0003 U 0000 "Cannot find messages",CR,LF
|
|
0004 U 0000 "Access denied",CR,LF
|
|
0005 U 0000 "File cannot be converted",CR,LF
|
|
0006 U 0000 "File not found",CR,LF
|
|
0007 U 0000 "File creation error",CR,LF
|
|
0008 U 0000 "Fix-ups needed - base segment (hex):"
|
|
0012 U 0000 "File name must be specified",CR,LF
|
|
0300 U 0000 "Converts .EXE (executable) files to binary format.",CR,LF,CR,LF
|
|
0301 U 0000 "EXE2BIN [drive1:][path1]input-file [[drive2:][path2]output-file]",CR,LF,CR,LF
|
|
0302 U 0000 " input-file Specifies the .EXE file to be converted.",CR,LF
|
|
0303 U 0000 " output-file Specifies the binary file to be created.",CR,LF
|
|
FASTOPEN 0000a1cd 0021
|
|
0004 U 0000 CR,LF,"FASTOPEN installed",CR,LF
|
|
0005 U 0000 CR,LF,"FASTOPEN already installed",CR,LF
|
|
0006 U 0000 CR,LF,"Incorrect parameter",CR,LF
|
|
0007 U 0000 CR,LF,"Too many drive entries",CR,LF
|
|
0008 U 0000 CR,LF,"Same drive specified more than once",CR,LF
|
|
0009 U 0000 CR,LF,"Invalid parameter",CR,LF
|
|
0010 U 0000 CR,LF,"Invalid switch type",CR,LF
|
|
0012 U 0001 CR,LF,"Invalid number of file/directory entries",CR,LF
|
|
0013 U 0000 CR,LF,"Cannot setup expanded memory",CR,LF
|
|
0014 U 0000 CR,LF,"Expanded memory not available",CR,LF
|
|
0015 U 0000 CR,LF,"Invalid drive specification %1",CR,LF
|
|
0016 U 0002 CR,LF,"FASTOPEN EMS entry count exceeded. Use fewer entries",CR,LF
|
|
0017 U 0000 CR,LF,"Cannot use FASTOPEN for drive %1",CR,LF
|
|
0019 U 0000 CR,LF,"Too many file/directory entries",CR,LF
|
|
0020 U 0000 CR,LF,"FASTOPEN cannot be installed under DosShell",CR,LF
|
|
0300 U 0000 "Decreases the amount of time needed to open frequently used files",CR,LF
|
|
0301 U 0000 "and directories.",CR,LF,CR,LF
|
|
0302 U 0000 "FASTOPEN drive:[[=]n] [drive:[[=]n][ ...]] [/X]",CR,LF,CR,LF
|
|
0303 U 0000 " drive: Specifies the hard disk drive you want Fastopen to work with.",CR,LF
|
|
0304 U 0000 " n Specifies the maximum number of file locations Fastopen retains",CR,LF
|
|
" in its filename cache.",CR,LF
|
|
0305 U 0000 " /X Creates the filename cache in expanded memory.",CR,LF
|
|
FDISK 0000a746 0140
|
|
0004 U 0000 "Cannot FDISK with network loaded",CR,LF
|
|
0005 U 0000 "No fixed disks present",CR,LF
|
|
0006 U 0000 "Error reading fixed disk",CR,LF
|
|
0007 U 0000 "Error writing fixed disk",CR,LF
|
|
0009 U 0003 "Y",0
|
|
0010 U 0003 "N",0
|
|
0011 U 0000 "The master boot code has NOT been updated.",CR,LF
|
|
0300 U 0000 "Configures a hard disk for use with MS-DOS.",CR,LF,CR,LF
|
|
0301 U 0000 "FDISK",CR,LF
|
|
1001 U 0000 " MS-DOS Version 5.00"
|
|
1002 U 0000 " Fixed Disk Setup Program"
|
|
1003 U 0000 " (C)Copyright Microsoft Corp. 1983 - 1991"
|
|
1004 U 0000 " FDISK Options"
|
|
1005 U 0000 "1. <R>Create DOS partition or Logical DOS Drive"
|
|
1006 U 0000 "2. <R>Set active partition"
|
|
1007 U 0000 "3. <R>Delete partition or Logical DOS Drive"
|
|
1008 U 0000 "4. <R>Display partition information"
|
|
1009 U 0000 "Press <H>Esc<R> to exit FDISK"
|
|
1010 U 0000 "Choose one of the following:"
|
|
1011 U 0000 "5. <R>Change current fixed disk drive"
|
|
1012 U 0000 "Current fixed disk drive: <H><I>"
|
|
1013 U 0000 "WARNING! <R>No partitions are set active - disk 1 is not startable unless"
|
|
1014 U 0000 "a partition is set active"
|
|
1015 U 0000 "Enter choice: <H>[<S> ]"
|
|
1016 U 0000 " Create DOS Partition or Logical DOS Drive"
|
|
1017 U 0000 "1. <R>Create Primary DOS Partition"
|
|
1018 U 0000 "2. <R>Create Extended DOS Partition"
|
|
1019 U 0000 "3. <R>Create Logical DOS Drive(s) in the Extended DOS Partition"
|
|
1020 U 0000 "Press <H>Esc<R> to return to FDISK Options"
|
|
1021 U 0000 " Create Primary DOS Partition"
|
|
1022 U 0000 "Do you wish to use the maximum available size for a Primary DOS Partition"
|
|
1023 U 0000 "and make the partition active (<Y>/<N>).....................? <H>[<S> ]"
|
|
1024 U 0000 "(<Y>/<N>)...................................................? <H>[<S> ]"
|
|
1025 U 0000 "Partition Status Type Volume Label Mbytes System Usage" ;C25
|
|
1026 U 0000 "Total disk space is <HIIIIR> Mbytes (1 Mbyte = 1048576 bytes)"
|
|
1027 U 0000 "Maximum space available for partition is <HIIIIR> Mbytes (<HIIIIR>)"
|
|
1028 U 0000 "Enter partition size in Mbytes or percent of disk space (%) to"
|
|
1029 U 0000 "create a Primary DOS Partition.................................: <H>[<IIISI>]"
|
|
1030 U 0000 " Create Extended DOS Partition"
|
|
1031 U 0000 "create an Extended DOS Partition..............................: <H>[<IIISI>]"
|
|
1032 U 0000 "Press <H>Esc<R> to continue<S>"
|
|
1033 U 0000 " Create Logical DOS Drive(s) in the Extended DOS Partition"
|
|
1034 U 0000 "Drv Volume Label Mbytes System Usage"
|
|
1035 U 0000 "Total Extended DOS Partition size is <HIIIIR> Mbytes (1 MByte = 1048576 bytes)"
|
|
1036 U 0000 "Maximum space available for logical drive is <HIIIIR> Mbytes <H>(<IIII>)"
|
|
1037 U 0000 "Enter logical drive size in Mbytes or percent of disk space (%)...<H>[<IIISI>]"
|
|
1038 U 0000 " Set Active Partition"
|
|
1039 U 0000 "Enter the number of the partition you want to make active...........: <H>[<S> ]"
|
|
1040 U 0000 " Delete DOS Partition or Logical DOS Drive"
|
|
1041 U 0000 "1. <R>Delete Primary DOS Partition"
|
|
1042 U 0000 "2. <R>Delete Extended DOS Partition"
|
|
1043 U 0000 "3. <R>Delete Logical DOS Drive(s) in the Extended DOS Partition"
|
|
1044 U 0000 " Delete Primary DOS Partition"
|
|
1045 U 0000 "WARNING! <OR>Data in the deleted Primary DOS Partition will be lost."
|
|
1046 U 0000 "Do you wish to continue (<Y>/<N>).................? <H>[<S> ]"
|
|
1047 U 0000 " Delete Extended DOS Partition"
|
|
1048 U 0000 "WARNING! <OR>Data in the deleted Extended DOS Partition will be lost."
|
|
1049 U 0000 "Do you wish to continue (<Y>/<N>).................? <H>[<S> ]"
|
|
1050 U 0000 " Delete Logical DOS Drive(s) in the Extended DOS Partition"
|
|
1051 U 0000 "WARNING! <OR>Data in a deleted Logical DOS Drive will be lost."
|
|
1052 U 0000 "What drive do you want to delete...............................? <H>[<S> ]"
|
|
1053 U 0000 "Are you sure (<Y>/<N>)..............................? <H>[<S> ]"
|
|
1054 U 0000 "Enter Volume Label..............................? <H>[<S> ]"
|
|
1055 U 0000 " Display Partition Information"
|
|
1056 U 0000 "The Extended DOS Partition contains Logical DOS Drives."
|
|
1057 U 0000 "Do you want to display the logical drive information (<Y>/<N>)......?<H>[<S> ]"
|
|
1058 U 0000 " Display Logical DOS Drive Information"
|
|
1059 U 0000 "System will now restart"
|
|
1060 U 0001 "Insert DOS system diskette in drive A:"
|
|
1061 U 0000 "Press any key when ready . . .<S>"
|
|
1062 U 0000 "Primary DOS Partition deleted"
|
|
1063 U 0000 "Extended DOS Partition deleted"
|
|
1064 U 0000 "Drive deleted"
|
|
1065 U 0000 "Partition <I> made active"
|
|
1066 U 0000 "Primary DOS Partition created"
|
|
1067 U 0000 "Extended DOS Partition created"
|
|
1068 U 0000 "Logical DOS Drive created, drive letters changed or added<W>"
|
|
1069 U 0000 "No partitions defined"
|
|
1070 U 0000 "No logical drives defined"
|
|
1071 U 0000 "Drive letters have been changed or deleted<W>"
|
|
1072 U 0000 "Drive redirected"
|
|
1073 U 0000 "Primary DOS Partition created, drive letters changed or added"
|
|
1074 U 0000 "No fixed disks present."
|
|
1075 U 0000 "Error reading fixed disk."
|
|
1076 U 0000 "Error writing fixed disk."
|
|
1077 U 0000 "Incorrect DOS version."
|
|
1078 U 0000 "Cannot FDISK with network loaded."
|
|
1079 U 0000 "No Primary DOS Partition to delete."
|
|
1080 U 0000 "No Extended DOS Partition to delete."
|
|
1081 U 0000 "Primary DOS Partition already exists."
|
|
1082 U 0000 "Extended DOS Partition already exists."
|
|
1083 U 0000 "No space to create a DOS partition."
|
|
1084 U 0000 "Requested logical drive size exceeds the maximum available space.<W>"
|
|
1085 U 0000 "Requested partition size exceeds the maximum available space.<W>"
|
|
1086 U 0000 "No partitions to delete."
|
|
1087 U 0000 "The only startable partition on Drive 1 is already set active.<W>"
|
|
1088 U 0000 "No partitions to make active."
|
|
1089 U 0000 "Partition selected (<I>) is not startable, active partition not changed.<W>"
|
|
1090 U 0000 "Cannot create Extended DOS Partition without"
|
|
1091 U 0000 "Primary DOS Partition on disk 1.<W>"
|
|
1092 U 0000 "All available space in the Extended DOS Partition"
|
|
1093 U 0000 "is assigned to logical drives.<W>"
|
|
1094 U 0000 "Cannot delete Extended DOS Partition while logical drives exist.<W>"
|
|
1095 U 0000 "All logical drives deleted in the Extended DOS Partition.<W>"
|
|
1096 U 0000 " is not a choice. Please enter <III>.<W>"
|
|
1097 U 0000 "WARNING! The partition set active is not startable.<W>"
|
|
1098 U 0000 " Only non-startable partitions exist."
|
|
1099 U 0000 "Only partitions on Drive 1 can be made active.<W>"
|
|
1100 U 0000 "Maximum number of Logical DOS Drives installed.<W>"
|
|
1101 U 0000 "Cannot create a zero size partition."
|
|
1102 U 0000 "Drive <II> already deleted."
|
|
1103 U 0000 "Unable to access Drive <I>.<OW>"
|
|
1104 U 0000 "Invalid entry, please enter <III>.<W>"
|
|
1105 U 0000 "Cannot delete Primary DOS Partition on drive 1 "
|
|
1106 U 0000 "when an Extended DOS Partition exists.<W>"
|
|
1107 U 0000 "Invalid entry.<W>"
|
|
1108 U 0000 "Volume label does not match.<W>"
|
|
1109 U 0000 "Cannot create Logical DOS Drive without"
|
|
1110 U 0000 "an Extended DOS Partition on the current drive.<W>"
|
|
1111 U 0000 "No Logical DOS Drive(s) to delete."
|
|
1112 U 0000 "Message string error <I>. See header of FDISKC.MSG for error definition"
|
|
1113 U 0000 "Internal error"
|
|
1114 U 0001 "Invalid partition table",0
|
|
1115 U 0001 "Error loading operating system",0
|
|
1116 U 0001 "Missing operating system",0
|
|
1117 U 0000 " Change Current Fixed Disk Drive"
|
|
1118 U 0000 " Disk Drv Mbytes Free Usage"
|
|
1119 U 0000 "(1 MByte = 1048576 bytes)"
|
|
1120 U 0000 "Enter Fixed Disk Drive Number (1-<I>).......................<H>[<SI>]"
|
|
1121 U 0000 "* Remote * ",0
|
|
1122 U 0000 " Fixed Disk Drive Status"
|
|
1123 U 0000 "What primary partition do you want to delete..? <H>[<S> ]<R>" ;C01
|
|
1124 U 0000 "Partition selected is not a Primary DOS Partition" ;C01
|
|
1125 U 0000 "4. <R>Delete Non-DOS Partition" ;C14
|
|
1126 U 0000 " Delete Non-DOS Partition" ;C14
|
|
1127 U 0000 "WARNING! <OR>Data in the deleted Non-DOS Partition will be lost." ;C14
|
|
1128 U 0000 "What Non-DOS partition do you want to delete..? <H>[<S> ]<R>" ;C14
|
|
1129 U 0000 "Non-DOS Partition deleted" ;C14
|
|
1130 U 0000 "No Non-DOS Partition to delete." ;C14
|
|
1131 U 0000 "Partition selected is not a Non-DOS Partition" ;C14
|
|
FIND 0000c938 0012
|
|
0004 U 0000 "FIND: "
|
|
0300 U 0000 "Searches for a text string in a file or files.",CR,LF,CR,LF
|
|
0301 U 0000 "FIND [/V] [/C] [/N] [/I] ""string"" [[drive:][path]filename[ ...]]",CR,LF,CR,LF
|
|
0302 U 0000 " /V Displays all lines NOT containing the specified string.",CR,LF
|
|
0303 U 0000 " /C Displays only the count of lines containing the string.",CR,LF
|
|
0304 U 0000 " /N Displays line numbers with the displayed lines.",CR,LF
|
|
0305 U 0000 " /I Ignores the case of characters when searching for the string.",CR,LF
|
|
0306 U 0000 " ""string"" Specifies the text string to find.",CR,LF
|
|
0307 U 0000 " [drive:][path]filename",CR,LF
|
|
0308 U 0000 " Specifies a file or files to search.",CR,LF,CR,LF
|
|
0309 U 0000 "If a pathname is not specified, FIND searches the text typed at the prompt",CR,LF
|
|
0310 U 0000 "or piped from another command.",CR,LF
|
|
FORMAT 0000ccc4 0082
|
|
0002 U 0000 CR,"%1 percent completed. ",CR ; max 39 chars (not counting CR,LF)
|
|
0004 U 0003 CR,"Format complete. ",CR,LF ; padded with blanks to 1 more than length of 0002 (%1 takes 3 characters)
|
|
0007 U 0000 "Insert new diskette for drive %1:",CR,LF
|
|
0009 U 0000 "Reinsert diskette for drive %1:",CR,LF
|
|
0011 U 0000 CR,"Format not supported on drive %1:", CR,LF
|
|
0012 U 0000 CR,"Invalid device parameters from device driver.",CR,LF
|
|
0013 U 0000 CR,"Error in IOCTL call. ",CR,LF
|
|
0014 U 0000 CR,"Not a block device. ",CR,LF
|
|
0015 U 0000 CR,"Error writing FAT. ",CR,LF
|
|
0016 U 0000 CR,"Error writing directory.",CR,LF
|
|
0017 U 0000 CR,"Cannot format an ASSIGNed or SUBSTed drive. ",CR,LF
|
|
0018 U 0000 CR,"Cannot find System Files.",CR,LF
|
|
0019 U 0000 CR,"Cannot format a network drive.",CR,LF
|
|
0021 U 0000 CR,"Parameters not supported.",CR,LF
|
|
0022 U 0003 CR,"Format terminated. ",CR,LF
|
|
0023 U 0000 CR,"Disk unsuitable for system disk.",CR,LF
|
|
0024 U 0000 CR,"Invalid media or Track 0 bad - disk unusable.",CR,LF
|
|
0025 U 0000 CR,"Unable to write BOOT. ",CR,LF
|
|
0026 U 0000 CR,"Error reading directory.",CR,LF
|
|
0028 U 0000 CR,"and press ENTER when ready..."
|
|
0029 U 0000 CR,"Invalid Volume ID. ",CR,LF
|
|
0031 U 0000 CR,"Enter current volume label for drive %1: "
|
|
0032 U 0000 CR,"Parameters not compatible",CR,LF,"with fixed disk.",CR,LF
|
|
0035 U 0000 CR,"Error reading partition table.",CR,LF
|
|
0037 U 0000 CR,"Format broken.",CR,LF
|
|
0038 U 0000 CR,"Format not available on drive %1:",CR,LF
|
|
0039 U 0000 CR,"Non-System disk or disk error.",CR,LF
|
|
0040 U 0000 CR,"Bad Partition Table. ",CR,LF
|
|
0041 U 0000 CR,"Parameters not supported by drive.",CR,LF
|
|
0042 U 0000 CR,LF
|
|
0043 U 0000 CR,LF,LF
|
|
0044 U 0000 CR,"Insert DOS disk in drive %1:",CR,LF
|
|
0045 U 0000 CR,LF,"WARNING, ALL DATA ON NON-REMOVABLE DISK",CR,LF
|
|
"DRIVE %1: WILL BE LOST!",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0046 U 0000 CR,"Format another (Y/N)?"
|
|
0047 U 0000 CR,"Error reading partition table.",CR,LF
|
|
0048 U 0000 CR,"Error writing partition table.",CR,LF
|
|
0049 U 0000 CR,"Parameters not compatible.", CR,LF
|
|
0050 U 0000 "%1 allocation units available on disk.",CR,LF
|
|
0051 U 0000 "%1 bytes in each allocation unit.",CR,LF
|
|
0052 U 0000 CR, "Error writing partition table.",CR,LF
|
|
0053 U 0000 CR,"Same parameter entered twice.",CR,LF
|
|
0054 U 0000 CR,"Must enter both /T and /N parameters.",CR,LF
|
|
0055 U 0000 CR,"Trying to recover allocation unit %1. ",CR
|
|
0056 U 0000 CR,"There is not enough room to create a restore file.",CR,LF
|
|
"You will not be able to use the unformat utility.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0057 U 0000 CR,"There is not enough disk space for system files. ",CR,LF
|
|
0058 U 0000 CR,"Disk was formatted under a different version of DOS.",CR,LF
|
|
"This disk cannot be unformatted.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0059 U 0000 CR,"There was an error creating the format recovery file.",CR,LF
|
|
"This disk cannot be unformatted.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0060 U 0000 CR,"Volume label is not supported with /8 parameter.",CR,LF
|
|
0070 U 0000 CR,"Insufficient memory to load system files.",CR,LF
|
|
0071 U 0000 CR,"Insufficient memory.",CR,LF
|
|
0075 U 0000 CR,"QuickFormat another (Y/N)?"
|
|
0076 U 0000 CR,"Existing format differs from that specified.",CR,LF
|
|
"This disk cannot be unformatted.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0077 U 0000 CR,"Invalid existing format.",CR,LF
|
|
"This disk cannot be QuickFormatted.",CR,LF
|
|
"Proceed with Unconditional Format (Y/N)?"
|
|
0078 U 0000 CR,"Formatting %1K",CR,LF
|
|
0079 U 0000 CR,"Formatting %1M",CR,LF
|
|
0080 U 0000 CR,"Formatting %1.%2M",CR,LF
|
|
0081 U 0000 CR,"WARNING: This disk cannot be unformatted if system files are transferred.",CR,LF
|
|
"Proceed with system transfer anyway (Y/N)?"
|
|
0082 U 0000 CR,"Verifying %1K",CR,LF
|
|
0083 U 0000 CR,"Verifying %1M",CR,LF
|
|
0084 U 0000 CR,"Verifying %1.%2M",CR,LF
|
|
0085 U 0000 CR,"Saving UNFORMAT information.",CR,LF
|
|
0086 U 0000 CR,"Checking existing disk format.",CR,LF
|
|
0087 U 0000 CR,"QuickFormatting %1K",CR,LF
|
|
0088 U 0000 CR,"QuickFormatting %1M",CR,LF
|
|
0089 U 0000 CR,"QuickFormatting %1.%2M",CR,LF
|
|
0300 U 0000 "Formats a disk for use with MS-DOS.",CR,LF,CR,LF
|
|
0301 U 0000 "FORMAT drive: [/V[:label]] [/Q] [/U] [/F:size] [/B | /S]",CR,LF
|
|
0302 U 0000 "FORMAT drive: [/V[:label]] [/Q] [/U] [/T:tracks /N:sectors] [/B | /S]",CR,LF
|
|
0303 U 0000 "FORMAT drive: [/V[:label]] [/Q] [/U] [/1] [/4] [/B | /S]",CR,LF
|
|
0304 U 0000 "FORMAT drive: [/Q] [/U] [/1] [/4] [/8] [/B | /S]",CR,LF,CR,LF
|
|
0305 U 0000 " /V[:label] Specifies the volume label.",CR,LF
|
|
0306 U 0000 " /Q Performs a quick format.",CR,LF
|
|
0307 U 0000 " /U Performs an unconditional format.",CR,LF
|
|
0308 U 0000 " /F:size Specifies the size of the floppy disk to format (such ",CR,LF
|
|
0309 U 0000 " as 160, 180, 320, 360, 720, 1.2, 1.44, 2.88).",CR,LF
|
|
0310 U 0000 " /B Allocates space on the formatted disk for system files.",CR,LF
|
|
0311 U 0000 " /S Copies system files to the formatted disk.",CR,LF
|
|
0312 U 0000 " /T:tracks Specifies the number of tracks per disk side.",CR,LF
|
|
0313 U 0000 " /N:sectors Specifies the number of sectors per track.",CR,LF
|
|
0314 U 0000 " /1 Formats a single side of a floppy disk.",CR,LF
|
|
0315 U 0000 " /4 Formats a 5.25-inch 360K floppy disk in a high-density drive.",CR,LF
|
|
0316 U 0000 " /8 Formats eight sectors per track.",CR,LF
|
|
GRAFTABL 0000e2d0 0008
|
|
0002 U 0000 "Active Code Page: %1",CR,LF
|
|
0003 U 0000 "Previous Code Page: %1",CR,LF
|
|
0004 U 0000 "None",NULL
|
|
0005 U 0000 "Non-standard",NULL
|
|
0300 U 0000 "Enables MS-DOS to display an extended character set in graphics mode.",CR,LF,CR,LF
|
|
0301 U 0000 "GRAFTABL [xxx]",CR,LF
|
|
"GRAFTABL /STATUS",CR,LF,CR,LF
|
|
0302 U 0000 " xxx Specifies a code page number.",CR,LF
|
|
0303 U 0000 " /STATUS Displays the current code page selected for use with GRAFTABL.",CR,LF
|
|
GRAPHICS 0000e4bb 0020
|
|
0005 U 0000 "Invalid parameter: %1",CR,LF
|
|
0007 U 0000 "Duplicate parameters not allowed",CR,LF
|
|
0009 U 0000 "Cannot find GRAPHICS profile",CR,LF
|
|
0010 U 0000 "Required profile statement missing before line %1",CR,LF
|
|
0011 U 0000 "Invalid profile statement on line %1",CR,LF
|
|
0012 U 0000 "Profile statement out of sequence on line %1",CR,LF
|
|
0013 U 0000 "Error reading GRAPHICS profile",CR,LF
|
|
0014 U 0000 "Syntax errors in GRAPHICS profile",CR,LF
|
|
0015 U 0000 "Printbox ID not in GRAPHICS profile",CR,LF
|
|
0016 U 0000 "Printer type not in GRAPHICS profile",CR,LF
|
|
0017 U 0000 "/B invalid with a black and white printer",CR,LF
|
|
0018 U 0000 "Unable to reload with profile supplied",CR,LF
|
|
0300 U 0000 "Loads a program that can print graphics.",CR,LF,CR,LF
|
|
0301 U 0000 "GRAPHICS [type] [[drive:][path]filename] [/R] [/B] [/LCD]",CR,LF
|
|
" [/PRINTBOX:STD | /PRINTBOX:LCD]",CR,LF,CR,LF
|
|
0302 U 0000 " type Specifies a printer type (see User's Guide and Reference).",CR,LF
|
|
0303 U 0000 " [drive:][path]filename",CR,LF
|
|
" Specifies the file containing information on supported printers.",CR,LF
|
|
0304 U 0000 " /R Prints white on black as seen on the screen.",CR,LF
|
|
0305 U 0000 " /B Prints the background in color for COLOR4 and COLOR8 printers.",CR,LF
|
|
0306 U 0000 " /LCD Prints using LCD aspect ratio.",CR,LF
|
|
0307 U 0000 " /PRINTBOX:STD | /PRINTBOX:LCD",CR,LF
|
|
" Specifies the print-box size, either STD or LCD.",CR,LF
|
|
JOIN 0000eaa5 0009
|
|
0002 U 0001 "Directory not empty",CR,LF
|
|
0300 U 0000 "Joins a disk drive to a directory on another drive.",CR,LF,CR,LF
|
|
0301 U 0000 "JOIN [drive1: [drive2:]path]",CR,LF
|
|
0302 U 0000 "JOIN drive1: /D",CR,LF,CR,LF
|
|
0303 U 0000 " drive1: Specifies a disk drive that will appear as a directory on",CR,LF
|
|
" drive2.",CR,LF
|
|
0304 U 0000 " drive2: Specifies a drive to which you want to join drive1.",CR,LF
|
|
0305 U 0000 " path Specifies the directory to which you want to join drive1. It",CR,LF
|
|
" must be empty and cannot be the root directory.",CR,LF
|
|
0306 U 0000 " /D Cancels any previous JOIN commands for the specified drive.",CR,LF,CR,LF
|
|
0307 U 0000 "Type JOIN without parameters to list currently joined drives.",CR,LF
|
|
KEYB 0000edd8 0023
|
|
0002 U 0000 "Current keyboard code: %1"
|
|
0003 U 0000 "Current keyboard ID: %1"
|
|
0004 U 0000 " code page: %1",CR,LF
|
|
0005 U 0000 "Current CON code page: %1",CR,LF
|
|
0006 U 0000 "Invalid keyboard code specified",CR,LF
|
|
0007 U 0000 "Invalid keyboard ID specified",CR,LF
|
|
0008 U 0000 "Invalid code page specified",CR,LF
|
|
0009 U 0000 "Bad or missing Keyboard Definition File",CR,LF
|
|
0010 U 0000 "KEYB has not been installed",CR,LF
|
|
0011 U 0000 "Active code page not available from CON device",CR,LF
|
|
0012 U 0000 "Code page specified has not been prepared",CR,LF
|
|
0013 U 0000 "One or more CON code pages invalid for given keyboard code",CR,LF
|
|
0014 U 0000 "Code page requested (%1) is not valid for given keyboard code",CR,LF
|
|
0015 U 0000 "Code page specified is inconsistent with the selected code page",CR,LF
|
|
0016 U 0001 "Keyboard ID specified is inconsistent with the selected keyboard layout",CR,LF
|
|
0017 U 0000 "Unable to create KEYB table in resident memory",CR,LF
|
|
0300 U 0000 "Configures a keyboard for a specific language.",CR,LF,CR,LF
|
|
0301 U 0000 "KEYB [xx[,[yyy][,[drive:][path]filename]]] [/E] [/ID:nnn]",CR,LF,CR,LF
|
|
0302 U 0000 " xx Specifies a two-letter keyboard code.",CR,LF
|
|
0303 U 0000 " yyy ÿ Specifies the code page for the character set.",CR,LF
|
|
0304 U 0000 " [drive:][path]filename Specifies the keyboard definition file.",CR,LF
|
|
0305 U 0000 " /E Specifies that an enhanced keyboard is installed.",CR,LF
|
|
0306 U 0000 " /ID:nnn Specifies the keyboard in use.",CR,LF
|
|
MEM 0000f40f 0066
|
|
0010 U 0000 CR,LF
|
|
0011 U 0000 " Address Name Size Type ",CR,LF
|
|
0012 U 0000 " ------- -------- ------ ------",CR,LF
|
|
0013 U 0000 " Handle EMS Name Size ",CR,LF
|
|
0014 U 0000 " ------- -------- ------ ",CR,LF
|
|
0015 U 0000 " %1 %2 %3 %4",CR,LF
|
|
0016 U 0000 " %1 %2 %3 ",CR,LF
|
|
0017 U 0000 " %1 %2 ",CR,LF
|
|
0018 U 0000 "%1 bytes total conventional memory",CR,LF
|
|
0019 U 0000 "%1 bytes available to MS-DOS",CR,LF
|
|
0020 U 0000 "%1 largest executable program size",CR,LF
|
|
0021 U 0000 "%1 bytes total EMS memory",CR,LF
|
|
0022 U 0000 "%1 bytes free EMS memory",CR,LF
|
|
0023 U 0000 "%1 bytes total contiguous extended memory",CR,LF
|
|
0024 U 0000 "Interrupt Vector",0
|
|
0025 U 0000 "ROM Communication Area",0
|
|
0026 U 0000 "DOS Communication Area",0
|
|
0027 U 0000 "IO",0
|
|
0028 U 0000 "MSDOS",0
|
|
0029 U 0000 "System Data",0
|
|
0030 U 0000 "System Program",0
|
|
0031 U 0000 "System Device Driver",0
|
|
0032 U 0000 "Installed Device Driver",0
|
|
0033 U 0000 "%1:",0
|
|
0034 U 0000 "%1: - %2:",0
|
|
0035 U 0000 "BUFFERS=",0
|
|
0036 U 0000 "FILES=",0
|
|
0037 U 0000 "FCBS=",0
|
|
0038 U 0000 "STACKS=",0
|
|
0039 U 0000 "DEVICE=",0
|
|
0040 U 0000 "IFS=",0
|
|
0041 U 0000 "LASTDRIVE=",0
|
|
0042 U 0000 "----------",0
|
|
0043 U 0000 " ",0
|
|
0044 U 0000 " %1 %2 %3",CR,LF
|
|
0045 U 0001 "INSTALL=",0
|
|
0046 U 0001 "%1 bytes available contiguous extended memory",CR,LF
|
|
0047 U 0000 "System Stacks",0
|
|
0048 U 0000 "-- Free --",0
|
|
0049 U 0000 "Program",0
|
|
0050 U 0000 "Environment",0
|
|
0051 U 0000 "Data",0
|
|
0052 N 0000 "%1 bytes available XMS memory",CR,LF
|
|
0053 N 0000 " 64Kb High Memory Area available",CR,LF
|
|
0054 N 0000 " High Memory Area in use",CR,LF
|
|
0055 N 0000 " MS-DOS resident in High Memory Area",CR,LF
|
|
0056 U 0000 "IBMBIO",0 ;*EGH
|
|
0057 U 0000 "IBMDOS",0 ;*EGH
|
|
0058 N 0000 " MS-DOS resident in ROM using High Memory Area",CR,LF
|
|
0059 U 0000 "Conventional Memory :",CR,LF
|
|
0060 U 0000 "Upper Memory :",CR,LF
|
|
0061 U 0000 "Total FREE : %1 %2 ",CR,LF
|
|
0062 U 0000 "FREE",0
|
|
0063 U 0000 " Name Size in Decimal Size in Hex",CR,LF
|
|
0064 U 0000 "------------- --------------------- -------------",CR,LF
|
|
0065 U 0000 "Total bytes available to programs (Conventional+Upper) : %1 %2",CR,LF
|
|
0066 U 0000 "Largest executable program size : %1 %2",CR,LF
|
|
0067 U 0000 "Largest available upper memory block : %1 %2",CR,LF
|
|
0068 U 0000 "Too much of memory fragmentation; MEM /C cannot be done",CR,LF
|
|
0069 U 0000 "SYSTEM",0
|
|
0070 U 0000 "Total bytes available to programs : %1 %2",CR,LF
|
|
0300 U 0000 "Displays the amount of used and free memory in your system.",CR,LF,CR,LF
|
|
0301 U 0000 "MEM [/PROGRAM | /DEBUG | /CLASSIFY]",CR,LF,CR,LF
|
|
0302 U 0000 " /PROGRAM or /P Displays status of programs currently loaded in memory.",CR,LF
|
|
0303 U 0000 " /DEBUG or /D Displays status of programs, internal drivers, and other",CR,LF
|
|
" information.",CR,LF
|
|
0304 U 0000 " /CLASSIFY or /C Classifies programs by memory usage. Lists the size of",CR,LF
|
|
" programs, provides a summary of memory in use, and lists",CR,LF
|
|
" largest memory block available.",CR,LF
|
|
0400 U 0000 "ADDDRV",0
|
|
MODE 000101cb 0079
|
|
0003 U 0000 CR,LF,"Must specify COM1, COM2, COM3 or COM4",CR,LF
|
|
0004 U 0000 CR,LF,"Resident portion of MODE loaded",CR,LF
|
|
0005 U 0000 CR,LF,"Illegal device name",CR,LF
|
|
0006 U 0000 CR,LF,"Printer error",CR,LF
|
|
0007 U 0000 CR,LF,"LPT%1: set for 80",CR,LF
|
|
0008 U 0000 CR,LF,"LPT%1: set for 132",CR,LF
|
|
0009 U 0000 CR,LF,"Printer lines per inch set",CR,LF
|
|
0010 U 0000 CR,LF,"Invalid baud rate specified",CR,LF
|
|
0011 U 0000 CR,LF,"COM%1: %2,%3,%4,%5,%6",CR,LF
|
|
0012 U 0000 "0123456789"
|
|
0013 U 0001 CR,LF,"Do you see the %1? (Y/N) "
|
|
0015 U 0000 "LPT%1: rerouted to COM%2:",CR,LF
|
|
0016 U 0000 "LPT%1: not rerouted",CR,LF
|
|
0017 U 0000 CR,LF,"%1 retry on parallel printer time-out",CR,LF
|
|
0018 U 0000 CR,LF," Unable to shift screen %1",CR,LF
|
|
0020 U 0000 CR,LF,"Invalid number of parameters",CR,LF
|
|
0021 U 0000 CR,LF,"NET 042: Unable to do requested command",CR,LF
|
|
0022 U 0001 CR,LF,"Infinite retry not supported on network printer",CR,LF
|
|
0023 U 0001 CR,LF,"Failure to access code page font file",cr,lf
|
|
0024 U 0000 CR,LF,"Failure to access device: %1",CR,LF
|
|
0025 U 0001 CR,LF,"Device or code page missing from font file",CR,LF
|
|
0026 U 0000 CR,LF,"Font file contents invalid",CR,LF
|
|
0027 U 0001 CR,LF,"Previously prepared code page replaced",CR,LF
|
|
0028 U 0001 CR,LF,"Active code page for device %1 is %2",CR,LF
|
|
0029 U 0000 CR,LF,"Device %1 not prepared",CR,LF
|
|
0030 U 0001 "%1 code pages:",CR,LF
|
|
0031 U 0001 " code page %1",CR,LF
|
|
0032 U 0001 CR,LF,"MODE %1 code page function completed",CR,LF
|
|
0033 U 0002 CR,LF,"Current code page settings:",CR,LF
|
|
0034 U 0002 " %1 - %2 code page",CR,LF
|
|
0035 U 0002 " code page not prepared",CR,LF
|
|
0036 U 0002 CR,LF,"Code page operation not supported on this device",CR,LF
|
|
0037 U 0002 CR,LF,"No code page has been selected",CR,LF
|
|
0038 U 0002 "Device error during %1",CR,LF
|
|
0039 U 0002 "Code page not prepared",CR,LF
|
|
0040 U 0002 CR,LF,"Current keyboard does not support this code page",CR,LF
|
|
0041 U 0002 CR,LF,"Error during read of font file",CR,LF
|
|
0042 U 0002 CR,LF,"Unable to perform refresh operation",CR,LF
|
|
0043 U 0002 CR,LF
|
|
0044 U 0002 CR,LF,"Status for device %1:",CR,LF
|
|
0045 U 0002 "------------------"
|
|
0046 U 0002 "----",CR,LF
|
|
0047 U 0002 "-----",CR,LF
|
|
0048 U 0002 "Lines=%1",CR,LF
|
|
0049 U 0002 "Columns=%1",CR,LF
|
|
0050 U 0002 CR,LF,"Rate and delay must be specified together",CR,LF
|
|
0051 U 0002 "Rate=%1",CR,LF
|
|
0052 U 0002 "Delay=%1",CR,LF
|
|
0053 U 0002 CR,LF,"Function not supported on this computer - %1",CR,LF
|
|
0054 U 0002 CR,LF,"Required font not loaded",CR,LF
|
|
0055 U 0002 CR,LF,"ANSI.SYS must be installed to perform requested function",CR,LF
|
|
0056 U 0002 CR,LF,"Baud rate required",CR,LF
|
|
0057 U 0002 "Retry=%1",CR,LF
|
|
0059 U 0002 "rightmost 9",0
|
|
0060 U 0002 "leftmost 0",0
|
|
0061 U 0002 "No",0
|
|
0062 U 0002 "Infinite",0
|
|
0063 U 0002 "left",0
|
|
0064 U 0002 "right",0
|
|
0065 U 0002 "Hardware",0
|
|
0066 U 0002 "Prepared",0
|
|
0067 U 0002 "status",0
|
|
0068 U 0002 "prepare",0
|
|
0069 U 0002 "select",0
|
|
0070 U 0002 "refresh",0
|
|
0071 U 0002 "write of font file to device",0
|
|
0072 U 0002 "selected",0
|
|
0073 U 0002 "system",0
|
|
0300 U 0000 "Configures system devices.",CR,LF,CR,LF
|
|
0301 U 0000 "Printer port: MODE LPTn[:] [COLS=c] [LINES=l] [RETRY=r]",CR,LF
|
|
0302 U 0000 "Serial port: MODE COMm[:] [BAUD=b] [PARITY=p] [DATA=d] [STOP=s] [RETRY=r]",CR,LF
|
|
0303 U 0000 "Device Status: MODE [device] [/STATUS]",CR,LF
|
|
0304 U 0000 "Redirect printing: MODE LPTn[:]=COMm[:]",CR,LF
|
|
0305 U 0000 "Prepare code page: MODE device CP PREPARE=((yyy[...]) [drive:][path]filename)",CR,LF
|
|
0306 U 0000 "Select code page: MODE device CP SELECT=yyy",CR,LF
|
|
0307 U 0000 "Refresh code page: MODE device CP REFRESH",CR,LF
|
|
0308 U 0000 "Code page status: MODE device CP [/STATUS]",CR,LF
|
|
0309 U 0000 "Display mode: MODE [display-adapter][,n]",CR,LF
|
|
" MODE CON[:] [COLS=c] [LINES=n]",CR,LF
|
|
0310 U 0000 "Typematic rate: MODE CON[:] [RATE=r DELAY=d]",CR,LF
|
|
MORE 00011148 0007
|
|
0002 U 0000 "-- More --"
|
|
0003 U 0000 "Too many arguments in command line",CR,LF
|
|
0300 U 0000 "Displays output one screen at a time.",CR,LF,CR,LF
|
|
0301 U 0000 "MORE < [drive:][path]filename",CR,LF
|
|
0302 U 0000 "command-name | MORE",CR,LF,CR,LF
|
|
0303 U 0000 " [drive:][path]filename Specifies a file to display one screen at a time.",CR,LF
|
|
0304 U 0000 " command-name Specifies a command whose output will be displayed.",CR,LF
|
|
MSBIO 00011319 0023
|
|
0003 U 0000 13,10,"Unrecognized command in CONFIG.SYS"
|
|
0004 U 0000 13,10,"$"
|
|
0005 U 0000 13,10,"Sector size too large in file $"
|
|
0006 U 0000 13,10,"Bad or missing $"
|
|
0007 U 0000 "Command Interpreter",0
|
|
0008 U 0000 13,10,"Invalid country code or code page",13,10,"$"
|
|
0009 U 0000 13,10,"Error in COUNTRY command",13,10,"$"
|
|
0010 U 0000 13,10, "Insufficient memory for COUNTRY.SYS file",13,10,"$"
|
|
0011 U 0000 13,10,"Configuration too large for memory",13,10,"$"
|
|
0012 U 0000 13,10,"Too many block devices",13,10,"$"
|
|
0013 U 0000 13,10,"Invalid STACK parameters",13,10,"$"
|
|
0014 U 0000 13,10,"Incorrect order in CONFIG.SYS line ","$"
|
|
0015 U 0000 "Error in CONFIG.SYS line ","$"
|
|
0016 U 0000 13,10,"Memory allocation error ","$"
|
|
0017 U 0001 0DH,0AH,7,0DH,0AH, "Internal stack overflow",0DH,0AH
|
|
"System halted",0DH,0AH,"$"
|
|
0018 U 0000 "HMA not available : Loading DOS low",13,10,"$"
|
|
0019 U 0000 13,10,"failed to boot - missing local driver $"
|
|
0020 U 0000 13,10,"Insert diskette for drive "
|
|
0021 U 0000 "A: and press any key when ready",13,10,10,0
|
|
0022 U 0000 13,10,"Bad command or parameters - $"
|
|
0023 U 0000 "Fatal Error:Cannot allocate Memory for DOS", 13, 10, "$"
|
|
0024 U 0000 "WARNING! Logical drives past Z: exist and will be ignored",13,10,"$"
|
|
0025 U 0000 "This version of DOS will boot only on IBM machines",13,10,0
|
|
MSDOS 00011869 0007
|
|
0001 U 0001 13,10,"Divide overflow",13,10
|
|
0002 U 0002 "y"
|
|
0003 U 0002 "n"
|
|
0004 U 0003 13,10,"A20 Hardware Error",13,10,"$"
|
|
0005 U 0000 "Y"
|
|
0006 U 0000 "N"
|
|
0007 U 0000 "You must have the file WINA20.386 in the root of your boot drive",13,10
|
|
"to run Windows in Enhanced Mode",13,10
|
|
NLSFUNC 000119a2 0003
|
|
0300 U 0000 "Loads country-specific information.",CR,LF,CR,LF
|
|
0301 U 0000 "NLSFUNC [[drive:][path]filename]",CR,LF,CR,LF
|
|
0302 U 0000 " [drive:][path]filename Specifies the file containing country-specific",CR,LF
|
|
" information.",CR,LF
|
|
PRINT 00011ac6 0034
|
|
0002 U 0000 CR,LF
|
|
0006 U 0000 " error reading file",CR,LF,"$"
|
|
0007 U 0000 "File not found",CR,LF,"$"
|
|
0008 U 0000 CR,LF,LF,"File $"
|
|
0009 U 0000 " canceled by operator$"
|
|
0010 U 0000 CR,LF,LF,"All files canceled by operator$"
|
|
0011 U 0000 "File allocation table bad drive "
|
|
0012 U 0000 "A.",CR,LF,"$"
|
|
0013 U 0000 "List output is not assigned to a device",CR,LF
|
|
0014 U 0000 "Resident part of PRINT installed",CR,LF
|
|
0015 U 0000 "Cannot use PRINT - Use NET PRINT",CR,LF
|
|
0017 U 0000 "PRINT queue is full",CR,LF
|
|
0018 U 0000 "PRINT queue is empty",CR,LF
|
|
0019 U 0000 "Access denied",CR,LF
|
|
0020 U 0000 "Invalid drive specification",CR,LF
|
|
0021 U 0000 "Errors on list device indicate that it",CR,LF
|
|
"may be off-line. Please check it.",CR,LF
|
|
0022 U 0000 CR,LF,LF," %1 is currently being printed",CR,LF
|
|
0023 U 0000 " %1 is in queue",CR,LF
|
|
0025 U 0001 "Pathname too long",CR,LF
|
|
0026 U 0001 "File not in PRINT queue",CR,LF
|
|
0027 U 0000 "Name of list device [PRN]: "
|
|
0300 U 0000 "Prints a text file while you are using other MS-DOS commands.",CR,LF,CR,LF
|
|
0301 U 0000 "PRINT [/D:device] [/B:size] [/U:ticks1] [/M:ticks2] [/S:ticks3]",CR,LF
|
|
0302 U 0000 " [/Q:qsize] [/T] [[drive:][path]filename[ ...]] [/C] [/P]",CR,LF,CR,LF
|
|
0303 U 0000 " /D:device Specifies a print device.",CR,LF
|
|
0304 U 0000 " /B:size Sets the internal buffer size, in bytes.",CR,LF
|
|
0305 U 0000 " /U:ticks1 Waits the specified maximum number of clock ticks for the printer",CR,LF
|
|
" to be available.",CR,LF
|
|
0306 U 0000 " /M:ticks2 Specifies the maximum number of clock ticks it takes to print a",CR,LF
|
|
" character.",CR,LF
|
|
0307 U 0000 " /S:ticks3 Allocates the scheduler the specified number of clock ticks for",CR,LF
|
|
" background printing.",CR,LF
|
|
0308 U 0000 " /Q:qsize Specifies the maximum number of files allowed in the print queue.",CR,LF
|
|
0309 U 0000 " /T Removes all files from the print queue.",CR,LF
|
|
0310 U 0000 " /C Cancels printing of the preceding filename and subsequent",CR,LF
|
|
" filenames.",CR,LF
|
|
0311 U 0000 " /P Adds the preceding filename and subsequent filenames to the print",CR,LF
|
|
" queue.",CR,LF,CR,LF
|
|
0312 U 0000 "Type PRINT without parameters to display the contents of the print queue.",CR,LF
|
|
PRINTER 000123f8 0002
|
|
0002 U 0000 "%1 code page driver cannot be initialized",CR,LF,BELL
|
|
0012 U 0000 "Invalid syntax on PRINTER.SYS code page driver",CR,LF,BELL
|
|
RECOVER 0001249d 0017
|
|
0002 U 0000 CR,LF,"File not found",CR,LF
|
|
0003 U 0000 CR,LF,"Cannot RECOVER an ASSIGNed or SUBSTed drive",CR,LF
|
|
0004 U 0000 CR,LF,"Invalid drive or file name",CR,LF
|
|
0005 U 0000 CR,LF,"WARNING - directory full",CR,LF
|
|
0006 U 0000 CR,LF,"Cannot RECOVER a network drive", CR,LF
|
|
0008 U 0000 CR,LF,"%1 file(s) recovered",CR,LF
|
|
0009 U 0000 CR,LF,"%1 of %2 bytes recovered",CR,LF
|
|
0010 U 0000 CR,LF,"Press any key to begin recovery of the",CR,LF,"file(s) on drive %1",CR,LF,CR,LF
|
|
0011 U 0000 CR,LF,"Cannot read file allocation table",CR,LF
|
|
0012 U 0000 CR,LF,"Cannot write file allocation table",CR,LF
|
|
0013 U 0000 CR,LF
|
|
0300 U 0000 "Recovers readable information from a bad or defective disk.",CR,LF,CR,LF
|
|
0301 U 0000 "RECOVER [drive:][path]filename",CR,LF
|
|
0302 U 0000 "RECOVER drive:",CR,LF,CR,LF
|
|
0303 U 0000 "Consult your User's Guide and Reference before using the RECOVER command.",CR,LF
|
|
0400 U 0000 "The current directory structure will be destroyed.",CR,LF
|
|
"All files will be placed in the root directory.",CR,LF
|
|
"Are you sure (Y/N)? "
|
|
0401 U 0000 "The entire drive will be reconstructed,",CR,LF
|
|
"directory structures will be destroyed.", CR, LF
|
|
"Are you sure (Y/N)? "
|
|
REPLACE 0001295a 0019
|
|
0003 U 0000 CR,LF,"No files replaced",CR,LF
|
|
0004 U 0000 CR,LF,"No files added",CR,LF
|
|
0013 U 0000 CR,LF,"Replacing %1",CR,LF
|
|
0014 U 0000 CR,LF,"Adding %1",CR,LF
|
|
0015 U 0000 CR,LF,"%1 file(s) replaced",CR,LF
|
|
0016 U 0000 CR,LF,"%1 file(s) added",CR,LF
|
|
0017 U 0000 CR,LF,"No files found - %1",CR,LF
|
|
0022 U 0000 CR,LF,"Replace %1? (Y/N)"
|
|
0023 U 0000 CR,LF,"Add %1? (Y/N)"
|
|
0300 U 0000 "Replaces files.",CR,LF,CR,LF
|
|
0301 U 0000 "REPLACE [drive1:][path1]filename [drive2:][path2] [/A] [/P] [/R] [/W]",CR,LF
|
|
"REPLACE [drive1:][path1]filename [drive2:][path2] [/P] [/R] [/S] [/W] [/U]",CR,LF,CR,LF
|
|
0302 U 0000 " [drive1:][path1]filename Specifies the source file or files.",CR,LF
|
|
0303 U 0000 " [drive2:][path2] Specifies the directory where files are to be",CR,LF
|
|
" replaced.",CR,LF
|
|
0304 U 0000 " /A Adds new files to destination directory. Cannot",CR,LF
|
|
" use with /S or /U switches.",CR,LF
|
|
0305 U 0000 " /P Prompts for confirmation before replacing a file or",CR,LF
|
|
" adding a source file.",CR,LF
|
|
0306 U 0000 " /R Replaces read-only files as well as unprotected",CR,LF
|
|
" files.",CR,LF
|
|
0307 U 0000 " /S Replaces files in all subdirectories of the",CR,LF
|
|
" destination directory. Cannot use with the /A",CR,LF
|
|
" switch.",CR,LF
|
|
0308 U 0000 " /W Waits for you to insert a disk before beginning.",CR,LF
|
|
0309 U 0000 " /U Replaces (updates) only files that are older than",CR,LF
|
|
" source files. Cannot use with the /A switch.",CR,LF
|
|
RESTORE 00013069 0035
|
|
0002 U 0000 CR,LF,"Source and target drives are the same",CR,LF
|
|
0003 U 0000 CR,LF,"Invalid number of parameters",CR,LF
|
|
0006 U 0000 CR,LF,"Invalid drive specification",CR,LF
|
|
0007 U 0000 CR,LF,"WARNING! No files were found to restore",CR,LF
|
|
0008 U 0000 CR,LF,"Insert backup diskette %1 in drive %2:",CR,LF
|
|
0009 U 0000 CR,LF,"Insert restore target in drive %1:",CR,LF
|
|
0011 U 0000 CR,LF,"WARNING! Diskette is out of sequence",CR,LF
|
|
"Replace diskette or continue if OK",CR,LF
|
|
0012 U 0000 CR,LF,"The last file was not restored",CR,LF
|
|
0013 U 0000 CR,LF,"*** Files were backed up %1 ***",CR,LF
|
|
0014 U 0000 CR,LF,"Source does not contain backup files",CR,LF
|
|
0015 U 0000 CR,LF,"Insufficient memory",CR,LF
|
|
0016 U 0000 CR,LF,"WARNING! File %1",CR,LF
|
|
"is a read-only file",CR,LF
|
|
"Replace the file (Y/N)?"
|
|
0017 U 0000 CR,LF,"Restore file sequence error",CR,LF
|
|
0018 U 0000 CR,LF,"File creation error",CR,LF
|
|
0019 U 0000 CR,LF,"Insufficient disk space",CR,LF
|
|
0020 U 0000 CR,LF,"*** Not able to restore file ***",CR,LF
|
|
0021 U 0000 CR,LF,"*** Restoring files from drive %1: ***",CR,LF
|
|
0022 U 0000 CR,LF,"WARNING! File %1",CR,LF
|
|
"was changed after it was backed up",CR,LF
|
|
"Replace the file (Y/N)?",CR,LF
|
|
0023 U 0000 "Diskette: %1",CR,LF
|
|
0032 U 0000 CR,LF,"*** Listing files on drive %1: ***",CR,LF
|
|
0300 U 0000 "Restores files that were backed up by using the BACKUP command.",CR,LF,CR,LF
|
|
0301 U 0000 "RESTORE drive1: drive2:[path[filename]] [/S] [/P] [/B:date] [/A:date] [/E:time]",CR,LF
|
|
0302 U 0000 " [/L:time] [/M] [/N] [/D]",CR,LF,CR,LF
|
|
0303 U 0000 " drive1: Specifies the drive on which the backup files are stored.",CR,LF
|
|
0304 U 0000 " drive2:[path[filename]]",CR,LF
|
|
" Specifies the file(s) to restore.",CR,LF
|
|
0305 U 0000 " /S Restores files in all subdirectories in the path.",CR,LF
|
|
0306 U 0000 " /P Prompts before restoring read-only files or files changed since",CR,LF
|
|
0307 U 0000 " the last backup (if appropriate attributes are set).",CR,LF
|
|
0308 U 0000 " /B Restores only files last changed on or before the specified date.",CR,LF
|
|
0309 U 0000 " /A Restores only files changed on or after the specified date.",CR,LF
|
|
" /E Restores only files last changed at or earlier than the specified",CR,LF
|
|
0310 U 0000 " time.",CR,LF
|
|
0311 U 0000 " /L Restores only files changed at or later than the specified time.",CR,LF
|
|
0312 U 0000 " /M Restores only files changed since the last backup.",CR,LF
|
|
0313 U 0000 " /N Restores only files that no longer exist on the destination disk.",CR,LF
|
|
0314 U 0000 " /D Displays files on the backup disk that match specifications.",CR,LF
|
|
SHARE 00013b08 0005
|
|
0003 U 0000 "SHARE cannot be installed under DOSSHELL.",CR,LF
|
|
0300 U 0000 "Installs file-sharing and locking capabilities on your hard disk.",CR,LF,CR,LF
|
|
0301 U 0000 "SHARE [/F:space] [/L:locks]",CR,LF,CR,LF
|
|
0302 U 0000 " /F:space Allocates file space (in bytes) for file-sharing information.",CR,LF
|
|
0303 U 0000 " /L:locks Sets the number of files that can be locked at one time.",CR,LF
|
|
SORT 00013cae 0009
|
|
0005 U 0000 "SORT: "
|
|
0300 U 0000 "Sorts input and writes results to the screen, a file, or another device.",CR,LF,CR,LF
|
|
0301 U 0000 "SORT [/R] [/+n] < [drive1:][path1]filename1 [> [drive2:][path2]filename2]",CR,LF
|
|
0302 U 0000 "[command |] SORT [/R] [/+n] [> [drive2:][path2]filename2]",CR,LF,CR,LF
|
|
0303 U 0000 " /R Reverses the sort order; that is, sorts Z to A,",CR,LF
|
|
" then 9 to 0.",CR,LF
|
|
0304 U 0000 " /+n Sorts the file according to characters in",CR,LF
|
|
" column n.",CR,LF
|
|
0305 U 0000 " [drive1:][path1]filename1 Specifies a file to be sorted.",CR,LF
|
|
0306 U 0000 " [drive2:][path2]filename2 Specifies a file where the sorted input is to be ",CR,LF
|
|
" stored.",CR,LF
|
|
0307 U 0000 " command Specifies a command whose output is to be sorted.",CR,LF
|
|
SUBST 0001405f 0009
|
|
0002 U 0001 "Incorrect number of parameters",CR,LF
|
|
0005 U 0000 "Drive already SUBSTed",CR,LF
|
|
0300 U 0000 "Associates a path with a drive letter.",CR,LF,CR,LF
|
|
0301 U 0000 "SUBST [drive1: [drive2:]path]",CR,LF
|
|
0302 U 0000 "SUBST drive1: /D",CR,LF,CR,LF
|
|
0303 U 0000 " drive1: Specifies a virtual drive to which you want to assign a path.",CR,LF
|
|
0304 U 0000 " [drive:2]path Specifies a physical drive and path you want to assign to",CR,LF
|
|
" a virtual drive.",CR,LF
|
|
0305 U 0000 " /D Deletes a substituted (virtual) drive.",CR,LF,CR,LF
|
|
0306 U 0000 "Type SUBST with no parameters to display a list of current virtual drives.",CR,LF
|
|
SYS 0001431a 0015
|
|
0004 U 0000 "Invalid drive specification",CR,LF
|
|
0007 U 0000 "No room for system on destination disk",CR,LF
|
|
0008 U 0001 "Invalid path or System files not found",CR,LF
|
|
0010 U 0000 "No system on default drive",CR,LF
|
|
0011 U 0000 "Cannot specify default drive",CR,LF
|
|
0012 U 0000 "Write failure, diskette unusable",CR,LF
|
|
0014 U 0000 "Insert system disk in drive %1",CR,LF
|
|
0016 U 0000 "Not able to SYS to %1 file system",CR,LF
|
|
0019 U 0000 "Source path and target drive cannot be the same",CR,LF ;C04
|
|
0025 U 0000 CR,LF,"Could not copy COMMAND.COM onto target disk",CR,LF
|
|
0026 U 0000 "Insufficient memory",CR,LF
|
|
0300 U 0000 "Copies MS-DOS system files and command interpreter to a disk you specify.",CR,LF,CR,LF
|
|
0301 U 0000 "SYS [drive1:][path] drive2:",CR,LF,CR,LF
|
|
0302 U 0000 " [drive1:][path] Specifies the location of the system files.",CR,LF
|
|
0303 U 0000 " drive2: Specifies the drive the files are to be copied to.",CR,LF
|
|
TREE 000146e8 0008
|
|
0002 U 0000 "Directory PATH listing for Volume %1",CR,LF
|
|
0003 U 0000 "Directory PATH listing",CR,LF
|
|
0004 U 0000 "No sub-directories exist",CR,LF,LF
|
|
0007 U 0000 "ÀÄó"
|
|
0300 U 0000 "Graphically displays the directory structure of a drive or path.",CR,LF,CR,LF
|
|
0301 U 0000 "TREE [drive:][path] [/F] [/A]",CR,LF,CR,LF
|
|
0302 U 0000 " /F Displays the names of the files in each directory.",CR,LF
|
|
0303 U 0000 " /A Uses ASCII instead of extended characters.",CR,LF
|
|
XCOPY 000148d6 0033
|
|
0004 U 0000 "Does %1 specify a file name",CR,LF
|
|
"or directory name on the target",CR,LF
|
|
"(F = file, D = directory)?"
|
|
0005 U 0000 "Press any key to begin copying file(s)"
|
|
0006 U 0000 "Path too long",CR,LF
|
|
0008 U 0000 "Cannot perform a cyclic copy",CR,LF
|
|
0012 U 0000 "Cannot XCOPY from a reserved device",CR,LF
|
|
0021 U 0000 "Invalid number of parameters",CR,LF
|
|
0022 U 0000 "Cannot XCOPY to a reserved device",CR,LF
|
|
0024 U 0000 "File creation error",CR,LF
|
|
0025 U 0000 "Reading source file(s)...",CR,LF
|
|
0026 U 0000 CR,LF
|
|
0027 U 0000 "%1 File(s) copied",CR,LF
|
|
0028 U 0000 "%1 File not found",CR,LF
|
|
0029 U 0000 "F D "
|
|
0030 U 0000 "%1%2",CR,LF
|
|
0031 U 0000 "%1\%2",CR,LF
|
|
0032 U 0000 "%1",CR,LF
|
|
0033 U 0000 "%1%2 (Y/N)?"
|
|
0034 U 0000 "%1\%2 (Y/N)?"
|
|
0036 U 0000 "Invalid Path, not all directories/files copied",CR,LF ;C02
|
|
0300 U 0000 "Copies files (except hidden and system files) and directory trees.",CR,LF,CR,LF
|
|
0301 U 0000 "XCOPY source [destination] [/A | /M] [/D:date] [/P] [/S [/E]] [/V] [/W]",CR,LF,CR,LF
|
|
0302 U 0000 " source Specifies the file(s) to copy.",CR,LF
|
|
0303 U 0000 " destination Specifies the location and/or name of new files.",CR,LF
|
|
0304 U 0000 " /A Copies files with the archive attriband interpreter to a disk you specify.",CR,LF,CR,LF
|
|
0301 U 0000 "SYS [drive1:][path] drive2:",CR,LF,CR,LF
|
|
0302 U 0000 " [drive1:][path] Specifies the location of the system files.",CR,LF
|
|
0303 U 0000 " drive2: Specifies the drive the files are to be copied to.",CR,LF
|
|
TREE 000146e8 0008
|
|
0002 U 0000 "Directory PATH listing for Volume %1",CR,LF
|
|
0003 U 0000 "Directory PATH listing",CR,LF
|
|
0004 U 0000 "No sub-directories exist",CR,LF,LF
|
|
0007 U 0000 "ÀÄó"
|
|
0300 U 0000 "Graphically displays the directory structure of a drive or path.",CR,LF,CR,LF
|
|
0301 U 0000 "TREE [drive:][path] [/F] [/A]",CR,LF,CR,LF
|
|
0302 U 0000 " /F Displays the names of the files in each directory.",CR,LF
|
|
0303 U 0000 " /A Uses ASCII instead of extended characters.",CR,LF
|
|
XCOPY 000148d6 0033
|
|
0004 U 0000 "Does %1 specify a file name",CR,LF
|
|
"or directory name on the target",CR,LF
|
|
"(F = file, D = directory)?"
|
|
0005 U 0000 "Press any key to begin copying file(s)"
|
|
0006 U 0000 "Path too long",CR,LF
|
|
0008 U 0000 "Cannot perform a cyclic copy",CR,LF
|
|
0012 U 0000 "Cannot XCOPY from a reserved device",CR,LF
|
|
0021 U 0000 "Invalid number of parameters",CR,LF
|
|
0022 U 0000 "Cannot XCOPY to a reserved device",CR,LF
|
|
0024 U 0000 "File creation error",CR,LF
|
|
0025 U 0000 "Reading source file(s)...",CR,LF
|
|
0026 U 0000 CR,LF
|
|
0027 U 0000 "%1 File(s) copied",CR,LF
|
|
0028 U 0000 "%1 File not found",CR,LF
|
|
0029 U 0000 "F D "
|
|
0030 U 0000 "%1%2",CR,LF
|
|
0031 U 0000 "%1\%2",CR,LF
|
|
0032 U 0000 "%1",CR,LF
|
|
0033 U 0000 "%1%2 (Y/N)?"
|
|
0034 U 0000 "%1\%2 (Y/N)?"
|
|
0036 U 0000 "Invalid Path, not all directories/files copied",CR,LF ;C02
|
|
0300 U 0000 "Copies files (except hidden and system files) and directory trees.",CR,LF,CR,LF
|
|
0301 U 0000 "XCOPY source [destination] [/A | /M] [/D:date] [/P] [/S [/E]] [/V] [/W]",CR,LF,CR,LF
|
|
0302 U 0000 " source Specifies the file(s) to copy.",CR,LF
|
|
0303 U 0000 " destination Specifies the location and/or name of new files.",CR,LF
|
|
0304 U 0000 " /A Copies files with the archive attribute set,",CR,LF
|
|
0305 U 0000 " doesn't change the attribute.",CR,LF
|
|
0306 U 0000 " /M Copies files with the archive attribute
|