|
|
[nls];; These values are used by setupldr when starting text setup; and by text setup to initialize nls values in the registry.;; For the codepage and UnicodeCasetable entries, the values are; <filename>,<identifier> pairs. Setupldr uses the first <filename>; as the file to load for use during text setup.;; JH: Make sure that the DefaultLayout below matches keyboard values; farther down in capitalization (i.e. don't change to "41d"AnsiCodepage = c_1252.nls,1252OemCodepage = c_850.nls,850,c_437.nls,437MacCodepage = c_10000.nls,10000UnicodeCasetable = l_intl.nls,041dOemHalFont = vga850.fonDefaultLayout = 0000041D
[Keyboard]STANDARD = "XT, AT eller ut�kat (83-104 tangenter)",files.i8042,i8042prtkbdhid = "USB-tangentbord",files.kbdhid,kbdhid@i:USB = "USB-tangentbord",files.kbdhid,kbdhid@m:none = "No Keyboard",files.none,""
[Files.BackupOnUpgrade]
[Files.BackupOnOverwrite]
[SystemPartitionFiles]@i:@@:bootfont.bin,"\"@a:@@:bootfont.bin,"\"
;; This section provides information about hard disk drivers.;; The left hand side is a name in the \Driver directory in the NT; \Driver object namespace.;; Value #0 is a format string used in creating the descriptive name; of the disk.;[DiskDriverMap]abiosdsk = "%1!u! MB Micro Channel-h�rddisk"atdisk = "%1!u! MB IDE/ESDI-h�rddisk"disk = "%1!u! MB h�rddisk %2!u! med ID %3!u! p� buss %4!u! p� %5"
[ScsiClass]cdrom = "SCSI-CD-ROM"floppy = "SCSI-disk"disk = "SCSI-h�rddisk"ramdisk = "RAM-diskdrivrutin"
[FileSystems]fat = "FAT-filsystem"ntfs = "Windows NT-filsystem (NTFS)"ksecdd = "Kernel Security Provider"
[FloppyDrivers]floppy = "Standarddiskett"fat = "FAT-filsystem"
[SystemPartitionFiles]@i:@@:Bootfont.bin,"\"
[CdRomDrivers]cdfs = "CD-ROM-filsystem"
[MouseDrivers]mouclass = "Musklassdrivrutin"mouhid = "HID-musfilterdrivrutin"
;; Font list;; Setup will create an entry in the [Fonts] section of win.ini; for each of the following fonts. (Fonts copied during GUI setup; have entries in [FontList] in a gui inf file -- see eng_ansi.txt.); Note that the [fonts] section of win.ini is shadowed into; HEKY_LOCAL_MACHINE\software\Microsoft\Windows NT\CurrentVersion\Fonts.;[FontListE]"Courier 10,12,15 (VGA res)" = COURE.FON"MS Sans Serif 8,10,12,14,18,24 (VGA res)" = SSERIFE.FON"MS Serif 8,10,12,14,18,24 (VGA res)" = SERIFE.FON"Tahoma (TrueType)" = TAHOMA.TTF"Microsoft Sans Serif (TrueType)" = MICROSS.TTF
@*:@*: If add a keyboard layout dll description here make sure@*: that you add the layout dll file name in [CmdConsFiles]@*: section in dosnet.inf also, so that when command console@*: is installed on the harddisk that particular layout file@*: can be copied@*:["Keyboard Layout"]0000041C = "Albansk"00000409 = "Amerikansk"00010409 = "Amerikansk (Dvorak)"00040409 = "Amerikansk (Dvorak, h�ger hand)"00030409 = "Amerikansk (Dvorak, v�nster hand)"00020409 = "Amerikansk (internationell)"0000080C = "Belgisk (fransk)"00000813 = "Belgisk (nederl�ndsk)"00000416 = "Brasiliansk (ABNT)"00000809 = "Brittisk"00000402 = "Bulgarisk"00010402 = "Bulgarisk (latinsk)"00000406 = "Dansk"00000425 = "Estnisk"0000040B = "Finsk"0000040C = "Fransk"00000408 = "Grekisk"00050408 = "Grekisk (latinsk)"00010408 = "Grekisk (220)"00020408 = "Grekisk (319)"00030408 = "Grekisk (220, latinsk)"00040408 = "Grekisk (319, latinsk)"00001809 = "Irl�ndsk"0000040F = "Isl�ndsk"00000410 = "Italiensk"00010410 = "Italiensk (142)"00001009 = "Kanadensisk (engelsk, flerspr�kig)"00000C0C = "Kanadensisk (fransk)"00010C0C = "Kanadensisk (fransk, flerspr�kig)"0000041a = "Kroatisk"0000080A = "Latinamerikansk"00000426 = "Lettisk"00010426 = "Lettisk (QWERTY)"00000427 = "Litauisk"00000413 = "Nederl�ndsk"00000414 = "Norsk"00010415 = "Polsk (214)"00000415 = "Polsk (f�r programmerare)"00000816 = "Portugisisk"00000418 = "Rum�nsk"00000419 = "Rysk"00010419 = "Rysk (skrivmaskin)"00000C1A = "Serbisk (kyrillisk)"00010C1A = "Serbisk (latinsk)"0000100C = "Schweizisk (fransk)"00000807 = "Schweizisk (tysk)"0000040A = "Spansk"0001040A = "Spansk (alternativ)"0000041D = "Svensk"0000041B = "Slovakisk"0001041B = "Slovakisk (QWERTY)"00000424 = "Slovensk"00000405 = "Tjeckisk"00010405 = "Tjeckisk (QWERTY)"0001041F = "Turkisk (F)"0000041F = "Turkisk (Q)"00000407 = "Tysk"00010407 = "Tysk (IBM)"00000422 = "Ukrainsk"0000040E = "Ungersk"0001040E = "Ungersk (101-tangenters)"00000423 = "Vitrysk"
[DiskDrivers]dmboot = "St�d f�r dynamiska volymer (dmboot)"i2omgmt = "St�d f�r Intelligent I/O"
[InputDevicesSupport]usbehci = "Ut�kad v�rdstyrenhet",files.usbehci,usbehciusbohci = "�ppen v�rdstyrenhet",files.usbohci,usbohciusbuhci = "Universell v�rdstyrenhet",files.usbuhci,usbuhciusbhub = "Drivrutin f�r allm�nt USB-nav",files.usbhub,usbhubhidusb = "HID-tolk (Human Interface Device)",files.hidusb,hidusbserial = "Drivrutin f�r seriell port",files.none,serialserenum = "Uppr�knare f�r seriell port",files.none,serenumusbstor = "Drivrutin f�r USB-lagringsklass",files.usbstor,usbstorusbccgp = "USB Generic Parent Driver",files.usbccgp,usbccgp@i:wd = "Microsoft Watchdog Timer Driver",files.wd,wd
[SCSI]@i:sparrow = "Adaptec AHA-151X/AHA-152X/AIC-6X60 SCSI Adapter"@i:aha154x = "Adaptec AHA-154X/AHA-164X SCSI Host Adapter"aic78xx = "Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller"aic78u2 = "Adaptec AHA-294XU2/AIC-7890 SCSI Controller"adpu160m = "Adaptec AIC-789X/AHA-3960 Ultra160 PCI SCSI Card"adpu320 = "Adaptec Ultra320 Family SCSI Controller"afcnt = "Agilent HHBA-510x PCI Fibre Channel Controller"dpti2o = "Adaptec 2000S/3000S Ultra160 SCSI RAID Controller"@i:asc3550 = "Advansys 3550 Ultra Wide SCSI Host Adapter"@i:asc3350p = "Advansys ABP460 PCMCIA SCSI Host Adapter"@i:abp480n5 = "Advansys ABP480 CardBus SCSI Host Adapter"@i:asc = "Advansys SCSI Host Adapter"@i:amsint = "AMD PCI SCSI Controller/Ethernet Adapter"mraid35x = "AMI MegaRaid RAID Controller"@i:cpqarray = "Compaq Drive Array"cpqfcalm = "Compaq Fibre Channel Host Controller"cpqarry2 = "Compaq Smart Array Controller"cpqcissm = "Compaq Smart Array 53xx-series Controller"lp6nds35 = "Emulex LP6000 Fibre Channel Host Adapters"@i:cd20xrnt = "IBM Portable PCMCIA CD-ROM Drive"@i:ipsraidn = "IBM ServeRAID Adapter"nfrd960 = "IBM ServeRAID Adapter"@i:i2omp = "Intelligent I/O Controller"@i:iirsp = "Intel RAID Adapter"atapi = "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller"cbidf2k = "CardBus/PCMCIA IDE Miniport Driver"@i:ini910u = "Initio Ultra SCSI Host Adapter"@i:dac2w2k = "Mylex EXR2000,3000/AR160,170,352 Raid Controllers"dac960nt = "Mylex DAC960/Digital SWXCR-Ex Raid Controller"@i:dellcerc = "DELL CERC ATA 100/4ch RAID Controller"@i:ultra = "Promise Technology Inc. Ultra IDE Controller"@i:hpt3xx = "HighPoint RAID Controller"ql1240 = "QLogic ISP 1240 SCSI Host Adapter"ql10wnt = "QLogic PCI SCSI Host Adapter"ql1080 = "Qlogic QLA1080, 64 bit PCI LVD SCSI HBA"ql1280 = "Qlogic QLA1280, 64 bit PCI LVD SCSI HBA"ql12160 = "QLogic QLA12160, 64 bit PCI DUAL 160M SCSI HBA"ql2100 = "QLogic QLA2000/QLA2100 PCI Fibre Channel Adapter"ql2200 = "QLogic QLA2200 PCI Fibre Channel Adapter"ql2300 = "QLogic QLA2300 PCI Fibre Channel Adapter"sym_hi = "LSI Logic C896 PCI SCSI Host Adapter"sym_u3 = "LSI Logic C1010 PCI SCSI Host Adapter"@i:symc810 = "LSI Logic C8100 PCI SCSI Host Adapter"symc8xx = "LSI Logic C8xx PCI SCSI Host Adapter"symmpi = "LSI Logic PCI Fibre Channel/LSI Logic PCI-X Ultra320 SCSI Host Adapter"hpn = "Hewlett Packard NetRAID-4M RAID Controller"perc2 = "Dell PERC 2/3 RAID Controller"perc2gat = "Dell PERC 2/3 RAID Controller (Gatling)"
[BootBusExtenders]pci = "PCI-bussdrivrutin",files.pci,pciacpi = "ACPI Plug & Play-bussdrivrutin",files.acpi,acpiisapnp = "ISA Plug & Play-bussdrivrutin",files.isapnp,isapnpacpiec = "Drivrutin f�r inb�ddad ACPI-styrenhet",files.none,acpiecohci1394 = "IEEE 1394 Bus OHCI-kompatibel portdrivrutin",files.ohci1394,ohci1394
[BusExtenders]pcmcia = "PCMCIA-st�d",files.pcmcia,pcmciapciide = "PCI IDE-bussdrivrutin",files.pciide,pciideintelide = "Intel IDE-bussdrivrutin",files.intelide,intelideviaide = "VIA IDE-bussdrivrutin",files.viaide,viaidecmdide = "CMD IDE-bussdrivrutin",files.cmdide,cmdidetoside = "Toshiba IDE-bussdrivrutin",files.toside,tosidealiide = "ALI IDE-bussdrivrutin",files.aliide,aliidemountmgr = "Hanteraren f�r monteringspunkter",files.none,mountmgrftdisk = "Volymhanteraren",files.none,ftdiskpartmgr = "Partitionshanteraren",files.none,partmgrvolsnap = "Volume Shadow Copy Manager",files.none,volsnapfdc = "St�d f�r diskettstation",files.none,fdcdmload = "St�d f�r dynamiska volymer (dmload)",files.none,dmloaddmio = "St�d f�r dynamiska volymer (dmio)",files.none,dmiosbp2port = "Drivrutin f�r IEEE 1394 SBP2-lagringsport", files.sbp2port,sbp2port
[Computer]@i:acpiapic_mp = "ACPI Multiprocessor",files.none@i:acpiapic_up = "ACPI Uniprocessor",files.none@a:acpiapic_mp = "ACPI Multiprocessor x86-64",files.none@a:acpiapic_up = "ACPI Uniprocessor x86-64",files.none@i:acpipic_up = "ACPI-PC (Advanced Configuration and Power Interface)",files.none@i:mps_up = "MPS Uniprocessor PC",files.none@i:mps_mp = "MPS Multiprocessor PC",files.none@i:e_isa_up = "Standard-PC",files.none
@m:acpipic_up = "ACPI UniProcessor ia64",files.none@m:acpipic_mp = "ACPI Multiprocessor ia64",files.none
[Display]@i:forcevga = "Standard VGA (640x480, 16 f�rger)",files.none@i:vga = "Automatisk identifiering",files.none@@!i:vga = "VGA-kompatibel",files.none@i:sglfb = "Cobalt",files.sglfb
[Mouse]@i:msps2 = "Microsoft-musportsmus (inkluderar BallPoint)",files.i8042,i8042prt@i:lgps2 = "Logitech-musportsmus",files.i8042,i8042prt@i:msbpser = "Seriell Microsoft BallPoint-mus",files.sermouse,sermouse@i:lgser = "Seriell Logitech-mus",files.sermouse,sermouse@@:none = "Ingen mus eller annat pekdon",files.none,""@@:mouhid = "USB-mus",files.mouhid,mouhid@@:msser = "Seriell Microsoft-mus",files.sermouse,sermouse@@:ps2 = "Musportsmus",files.i8042,i8042prt@@:sermouse = "Seriell mus",files.sermouse,sermouse@i:USB = "USB-mus",files.mouhid,mouhid
@*: COMPAT: we purposely put two strings section in txtsetup.sif@*: The problem is that setupapi only reads strings from the first @*: strings section it encounters. Since older versions of the OS@*: accidentally had multiple Strings sections in the past, we make@*: Whistler have multiple strings sections so that older applications@*: (like win2k risetup) can read this file without requiring any change@*: The only string that risetup specifically cares about is whatever@*: LoadIdentifier points at, so you can probably safely add new strings@*: to this section.@*:@*:@*: The first strings section comes another one of the files that @*: builds txtsetup.sif
[Strings]@@!m:@w!p:wks_id = "Microsoft Windows XP Professional"@a:@w!p:wks_id = "Windows XP 64-Bit 2003"@m:@w!p:wks_id = "Windows XP 64-Bit 2003"@@:@p:wks_id = "Microsoft Windows XP Home Edition"@@:@s!e!b!l:srv_id = "Windows Server 2003, Standard"@@:@e!d:srv_id = "Windows Server 2003, Enterprise"@@:@d:srv_id = "Windows Server 2003, Datacenter"@@:@b:srv_id = "Windows Server 2003, Web"@@:@l:srv_id = "Windows Server 2003 for Small Business Server"@@!m:@w!p:wks_id_vga = "Microsoft Windows XP Professional [VGA-l�ge]"@a:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [VGA-l�ge]"@m:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [VGA-l�ge]"@@:@p:wks_id_vga = "Microsoft Windows XP Home Edition [VGA-l�ge]"@@:@s!e!b!l:srv_id_vga = "Windows Server 2003, Standard [VGA-l�ge]"@@:@e!d:srv_id_vga = "Windows Server 2003, Enterprise [VGA-l�ge]"@@:@d:srv_id_vga = "Windows Server 2003, Datacenter [VGA-l�ge]"@@:@b:srv_id_vga = "Windows Server 2003, Web [VGA-l�ge]"@@:@l:srv_id_vga = "Windows Server 2003 for Small Business Server [VGA-l�ge]"@@:@w:cancel_id = "Avbryt installationsprogrammet f�r Windows"@@:@w:9x_id = "Microsoft Windows"
|
