windows-server-2003/windows/richedit/inc41/gdiplusmetaheader.h

/**************************************************************************\
*
* Copyright (c) 1998-2000, Microsoft Corp.  All Rights Reserved.
*
* Module Name:
*
*   Metafile headers
*
* Abstract:
*
*   Declarations for various metafile header structures.
*
* Revision History:
*
*   10/15/1999 DCurtis
*       Created it.
*   10/15/1999 AGodfrey
*       Moved it to a separate file.
*
\**************************************************************************/

#ifndef _GDIPLUSMETAHEADER_H
#define _GDIPLUSMETAHEADER_H

typedef struct
{
    DWORD   iType;              // Record type EMR_HEADER
    DWORD   nSize;              // Record size in bytes.  This may be greater
                                // than the sizeof(ENHMETAHEADER).
    RECTL   rclBounds;          // Inclusive-inclusive bounds in device units
    RECTL   rclFrame;           // Inclusive-inclusive Picture Frame of metafile in .01 mm units
    DWORD   dSignature;         // Signature.  Must be ENHMETA_SIGNATURE.
    DWORD   nVersion;           // Version number
    DWORD   nBytes;             // Size of the metafile in bytes
    DWORD   nRecords;           // Number of records in the metafile
    WORD    nHandles;           // Number of handles in the handle table
                                // Handle index zero is reserved.
    WORD    sReserved;          // Reserved.  Must be zero.
    DWORD   nDescription;       // Number of chars in the unicode description string
                                // This is 0 if there is no description string
    DWORD   offDescription;     // Offset to the metafile description record.
                                // This is 0 if there is no description string
    DWORD   nPalEntries;        // Number of entries in the metafile palette.
    SIZEL   szlDevice;          // Size of the reference device in pels
    SIZEL   szlMillimeters;     // Size of the reference device in millimeters
} ENHMETAHEADER3;

// Aldus Placeable Metafiles

// Placeable Metafiles were created by Aldus Corporation as a non-standard
// way of specifying how a metafile is mapped and scaled on an output device.
// Placeable metafiles are quite wide-spread, but not directly supported by
// the Windows API. To playback a placeable metafile using the Windows API,
// you will first need to strip the placeable metafile header from the file.
// This is typically performed by copying the metafile to a temporary file
// starting at file offset 22 (0x16). The contents of the temporary file may
// then be used as input to the Windows GetMetaFile(), PlayMetaFile(),
// CopyMetaFile(), etc. GDI functions.

// Each placeable metafile begins with a 22-byte header,
//  followed by a standard metafile:

#include <pshpack2.h>   // set structure packing to 2

typedef struct
{
    INT16           Left;
    INT16           Top;
    INT16           Right;
    INT16           Bottom;
} APMRect16;

typedef struct
{
    UINT32          Key;            // GDIP_WMF_ALDUSKEY
    INT16           Hmf;            // Metafile HANDLE number (always 0)
    APMRect16       BoundingBox;    // Coordinates in metafile units
    INT16           Inch;           // Number of metafile units per inch
    UINT32          Reserved;       // Reserved (always 0)
    INT16           Checksum;       // Checksum value for previous 10 WORDs
} APMFileHeader;

#include <poppack.h>

// Key contains a special identification value that indicates the presence
// of a placeable metafile header and is always 0x9AC6CDD7.

// Handle is used to stored the handle of the metafile in memory. When written
// to disk, this field is not used and will always contains the value 0.

// Left, Top, Right, and Bottom contain the coordinates of the upper-left
// and lower-right corners of the image on the output device. These are
// measured in twips.

// A twip (meaning "twentieth of a point") is the logical unit of measurement
// used in Windows Metafiles. A twip is equal to 1/1440 of an inch. Thus 720
// twips equal 1/2 inch, while 32,768 twips is 22.75 inches.

// Inch contains the number of twips per inch used to represent the image.
// Normally, there are 1440 twips per inch; however, this number may be
// changed to scale the image. A value of 720 indicates that the image is
// double its normal size, or scaled to a factor of 2:1. A value of 360
// indicates a scale of 4:1, while a value of 2880 indicates that the image
// is scaled down in size by a factor of two. A value of 1440 indicates
// a 1:1 scale ratio.

// Reserved is not used and is always set to 0.

// Checksum contains a checksum value for the previous 10 WORDs in the header.
// This value can be used in an attempt to detect if the metafile has become
// corrupted. The checksum is calculated by XORing each WORD value to an
// initial value of 0.

// If the metafile was recorded with a reference Hdc that was a display.
#define GDIP_EMFPLUSFLAGS_DISPLAY       0x00000001

class MetafileHeader
{
public:
    MetafileType        Type;
    UINT                Size;               // Size of the metafile (in bytes)
    UINT                Version;            // EMF+, EMF, or WMF version
    UINT                EmfPlusFlags;
    REAL                DpiX;
    REAL                DpiY;
    INT                 X;                  // Bounds in device units
    INT                 Y;
    INT                 Width;
    INT                 Height;
    union
    {
        METAHEADER      WmfHeader;
        ENHMETAHEADER3  EmfHeader;
    };
    INT                 EmfPlusHeaderSize;  // size of the EMF+ header in file
    INT                 LogicalDpiX;        // Logical Dpi of reference Hdc
    INT                 LogicalDpiY;        // usually valid only for EMF+ files

public:
    // Get the metafile type
    MetafileType GetType() const { return Type; }

    // Get the size of the metafile in BYTEs
    UINT GetMetafileSize() const { return Size; }

    // If IsEmfPlus, this is the EMF+ version; else it is the WMF or EMF version
    UINT GetVersion() const { return Version; }

    // Get the EMF+ flags associated with the metafile
    UINT GetEmfPlusFlags() const { return EmfPlusFlags; }

    // Get the X Dpi of the metafile
    REAL GetDpiX() const { return DpiX; }

    // Get the Y Dpi of the metafile
    REAL GetDpiY() const { return DpiY; }

    // Get the bounds of the metafile in device units
    VOID GetBounds (OUT Rect *rect) const
    {
        rect->X = X;
        rect->Y = Y;
        rect->Width = Width;
        rect->Height = Height;
    }
    
    // Is it any type of WMF (standard or Aldus Placeable Metafile)?
    BOOL IsWmf() const
    {
       return ((Type == MetafileTypeWmf) || (Type == MetafileTypeWmfAldus));
    }

    // Is this an Aldus Placeable Metafile?
    BOOL IsWmfAldus() const { return (Type == MetafileTypeWmf); }

    // Is this an EMF (not an EMF+)?
    BOOL IsEmf() const { return (Type == MetafileTypeEmf); }

    // Is this an EMF or EMF+ file?
    BOOL IsEmfOrEmfPlus() const { return (Type >= MetafileTypeEmf); }

    // Is this an EMF+ file?
    BOOL IsEmfPlus() const { return (Type >= MetafileTypeEmfPlusOnly); }

    // Is this an EMF+ dual (has dual, down-level records) file?
    BOOL IsEmfPlusDual() const { return (Type == MetafileTypeEmfPlusDual); }

    // Is this an EMF+ only (no dual records) file?
    BOOL IsEmfPlusOnly() const { return (Type == MetafileTypeEmfPlusOnly); }

    // If it's an EMF+ file, was it recorded against a display Hdc?
    BOOL IsDisplay() const
    {
        return (IsEmfPlus() &&
                ((EmfPlusFlags & GDIP_EMFPLUSFLAGS_DISPLAY) != 0));
    }

    // Get the WMF header of the metafile (if it is a WMF)
    const METAHEADER * GetWmfHeader() const
    {
        if (IsWmf())
        {
            return &WmfHeader;
        }
        return NULL;
    }

    // Get the EMF header of the metafile (if it is an EMF)
    const ENHMETAHEADER3 * GetEmfHeader() const
    {
        if (IsEmfOrEmfPlus())
        {
            return &EmfHeader;
        }
        return NULL;
    }
};

#endif