windows-server-2003/printscan/print/drivers/usermode/ppd/usa/dclps401.ppd

*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1993 Adobe Systems Incorporated. 
*% All Rights Reserved. 
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*%Copyright 1993 Digital Equipment Corporation.
*FormatVersion: "4.0"
*FileVersion: "1.2"
*PCFileName: "DCLPS401.PPD"
*LanguageVersion: English
*Product: "(PrintServer 40)"
*PSVersion: "(48.3) 39"
*ModelName: "Digital PrintServer 40 Plus"
*NickName: "Digital PrintServer 40 Plus"

*% === Basic Capabilities ===============
*FreeVM: "902571"
*LanguageLevel: "1"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*FileSystem: False
*Throughput: "40"

*% For MS Windows: Do not put ^D in files
*EndOfFile: False

*Password: "(LPS40)"
*ExitServer: "
   count 0 eq { true }{ dup statusdict /checkpassword get exec not } ifelse 
   { (WARNING : Cannot perform the exitserver command.) = 
     (Password supplied is not valid.) = 
     (Please contact the author of this software.) = flush
     quit 
   } if 
   serverdict /exitserver get exec"
*End

*DefaultResolution: 300dpi
*?Resolution: "
   save
   initgraphics
   matrix defaultmatrix dup 
   0 get dup mul exch 1 get dup mul add sqrt
   72 mul round cvi
   (          ) cvs print (dpi) = flush
   restore"
*End

*% === DECimage (Smoothing) ============
*OpenUI *Smoothing/DECimage: Boolean
*OrderDependency: 50 AnySetup *Smoothing
*DefaultSmoothing: Off
*Smoothing Off: "false statusdict /setDECimage get exec"
*Smoothing On: "true statusdict /setDECimage get exec"
*?Smoothing: "
    save statusdict /DECimage get exec
    {(On)}{(Off)} ifelse = flush restore"
*End
*CloseUI: *Smoothing

*% === DECimageparams (bits per pixel) ============
*OpenUI *BitsPerPixel/DECimage controls: PickOne
*OrderDependency: 50 AnySetup *BitsPerPixel
*DefaultBitsPerPixel: Off
*BitsPerPixel Off/Standard: "0.0 1.0 0.0 1 statusdict /setDECimageparams get exec"
*BitsPerPixel 1/High Contrast: "0.2 0.8 0.0 1 statusdict /setDECimageparams get exec"
*BitsPerPixel 2/Low Contrast: "-0.4 1.5 0.0 1 statusdict /setDECimageparams get exec"
*BitsPerPixel 4/Sharp: "0.0 1.0 2.0 1 statusdict /setDECimageparams get exec"
*BitsPerPixel 8/Soft: "0.0 1.0 -1.0 1 statusdict /setDECimageparams get exec"
*CloseUI:BitsPerPixel

*% Halftone Information ===============
*AccurateScreensSupport: False
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
 {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }
 {dup mul exch dup mul add 1 exch sub }ifelse }"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Factory
*Transfer Factory: "{dup 0.5 lt {0.225 mul 0.5 div }{1.55 mul 0.55 sub }ifelse }"
*Transfer Factory.Inverse: "{ 1 exch sub dup 0.5 lt {0.225 mul 0.5 div }{1.55 mul 0.55 sub }ifelse }"
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"

*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize Executive: "statusdict /executivetray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec"
*?PageSize: "
    save
    9 dict
    dup /lettertray (Letter) put
    dup /legaltray (Legal) put
    dup /11x17tray (Tabloid) put
    dup /executivetray (Executive) put
    dup /a3tray (A3) put
    dup /a4tray (A4) put
    dup /a5tray (A5) put
    dup /b4tray (B4) put
    dup /b5tray (B5) put
    statusdict /papersize get exec
    3 1 roll  {get} stopped {(Unknown)}if
    exch  not { print (.Transverse) }if
    = flush restore"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: ""
*PageRegion Legal: ""
*PageRegion Tabloid: ""
*PageRegion Executive: ""
*PageRegion A3: ""
*PageRegion A4: ""
*PageRegion A5: ""
*PageRegion B4: ""
*PageRegion B5: ""
*CloseUI: *PageRegion

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "6.48 8.16 605.28 783.6 "
*ImageableArea Legal: "6.48 8.88 605.28 999.36 "
*ImageableArea Tabloid: "8.16 9.36 783.6 1214.88 "
*ImageableArea Executive: "9.36 8.16 508.32 745.2 "
*ImageableArea A3: "5.76 6.36 834.96 1181.16 "
*ImageableArea A4: "5.76 6.36 589.2 832.32 "
*ImageableArea A5: "6.24 6.0 413.04 589.44 "
*ImageableArea B4: "7.08 9.24 721.08 1022.76 "
*ImageableArea B5: "8.28 7.32 507.24 721.08 "
*?ImageableArea: "
    save
    /cvp { (                ) cvs print ( ) print } bind def
    /upperright {10000 mul floor 10000 div} bind def
    /lowerleft {10000 mul ceiling 10000 div} bind def
    newpath clippath pathbbox
    4 -2 roll exch 2 {lowerleft cvp} repeat
    exch 2 {upperright cvp} repeat flush
    restore"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Tabloid: "792 1224"
*PaperDimension Executive: "522 756"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A5: "419 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"

*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: LargeCapacity
*InputSlot Upper: "1 statusdict /setpapertray get exec"
*InputSlot Middle: "2 statusdict /setpapertray get exec"
*InputSlot LargeCapacity: "3 statusdict /setpapertray get exec"
*?InputSlot: "
  save
     [ (Upper) (Middle) (LargeCapacity) ]
     statusdict /papertray
     {get exec} stopped { pop pop (Unknown) } if = flush
  restore"
*End
*CloseUI: *InputSlot

*OpenUI *OutputBin: PickOne
*OrderDependency: 40 AnySetup *OutputBin
*DefaultOutputBin:  Upper
*OutputBin Side: "1 statusdict /setoutputtray get exec"
*OutputBin Faceup: "2 statusdict /setoutputtray get exec"
*OutputBin Upper: "3 statusdict /setoutputtray get exec"
*?OutputBin: "
  save
     mark
     [ (Side) (Faceup) (Upper) ]
     statusdict /outputtray
     {get exec 1 sub get exch pop} stopped
     { cleartomark (Unknown) } if = flush
  restore"
*End
*CloseUI: *OutputBin

*PageStackOrder Side: Normal
*PageStackOrder Faceup: Reverse
*PageStackOrder Upper: Normal

*% Font Information =====================
*DefaultFont: Error
*Font AvantGarde-Book: Standard "(001.001)" Standard
*Font AvantGarde-BookOblique: Standard "(001.001)" Standard
*Font AvantGarde-Demi: Standard "(001.001)" Standard
*Font AvantGarde-DemiOblique: Standard "(001.001)" Standard
*Font Courier: Standard "(001.004)" Standard
*Font Courier-Bold: Standard "(001.004)" Standard
*Font Courier-BoldOblique: Standard "(001.004)" Standard
*Font Courier-Oblique: Standard "(001.004)" Standard
*Font Helvetica: Standard "(001.001)" Standard
*Font Helvetica-Bold: Standard "(001.001)" Standard
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard
*Font Helvetica-Oblique: Standard "(001.001)" Standard
*Font LubalinGraph-Book: Standard "(001.001)" Standard
*Font LubalinGraph-BookOblique: Standard "(001.001)" Standard
*Font LubalinGraph-Demi: Standard "(001.001)" Standard
*Font LubalinGraph-DemiOblique: Standard "(001.001)" Standard
*Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard
*Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard
*Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard
*Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard
*Font Souvenir-Demi: Standard "(001.001)" Standard
*Font Souvenir-DemiItalic: Standard "(001.001)" Standard
*Font Souvenir-Light: Standard "(001.001)" Standard
*Font Souvenir-LightItalic: Standard "(001.001)" Standard
*Font Symbol: Special "(001.001)" Special
*Font Times-Bold: Standard "(001.001)" Standard
*Font Times-BoldItalic: Standard "(001.001)" Standard
*Font Times-Italic: Standard "(001.001)" Standard
*Font Times-Roman: Standard "(001.001)" Standard

*?FontQuery: "
 save
 /str 100 string dup 0 (fonts/) putinterval def
 {
   count 1 gt
   { 
     exch dup str 6 94 getinterval cvs
     (/) print dup print (:) print exch
     FontDirectory exch known
     { pop (Yes) }
    { 
      length 6 add str 0 3 -1 roll getinterval
      mark exch status
       {cleartomark (Yes)}{cleartomark (No)} ifelse
     } ifelse =
   }
   {exit} ifelse
 }bind loop
 (*) = flush
 restore"
*End

*?FontList: "save FontDirectory { pop == } bind forall flush (*) = flush restore"

*% Printer Messages (verbatim from printer):

*Message: "A new input or output tray has been selected"
*Message: "Document has been printed"
*Message: "Job \jobname\ Aborted by Server Management"
*Message: "Job \jobname\ Aborted"
*Message: "Job \jobname\ Connect"
*Message: "Job \jobname\ Finish"
*Message: "Job \jobname\ Start"
*Message: "Job aborted - Printer is still paused"
*Message: "Job acceptance is disabled - job rejected"
*Message: "Pending Job \jobname\ Aborted"
*Message: "PostScript quit operator has been executed"
*Message: "Print Engine error has been corrected"
*Message: "Print Engine has gone online"
*Message: "Print Engine ready"
*Message: "Problem Unknown"
*Message: "String is too long - it has been truncated"
*Message: "Switching to alternate paper source"
*Message: "Timeout trying to send a message"
*Message: "exitserver has been executed - permanent state may be changed"

*% PrinterErrors
*PrinterError: "Add toner and Clean components"
*PrinterError: "Call Field Service to correct error"
*PrinterError: "Charge wire cleaning completed"
*PrinterError: "Charge wire cleaning in progress"
*PrinterError: "Check: toner cartridge installation"
*PrinterError: "Cleaning unit absent or improperly seated"
*PrinterError: "Cleaning unit full - needs replacement"
*PrinterError: "Communication with print engine lost -- reboot PrintServer"
*PrinterError: "Developer unit absent or improperly seated"
*PrinterError: "Engine command buffer overflow -- reboot PrintServer"
*PrinterError: "Field Service maintenance required- Call Field Service"
*PrinterError: "Fuser unit absent or improperly seated"
*PrinterError: "General user maintenance, perform:  \maintenance\"
*PrinterError: "Image density adjustment required"
*PrinterError: "Incorrect media in LCIT"
*PrinterError: "Incorrect media in lower paper tray"
*PrinterError: "Incorrect media in upper paper tray"
*PrinterError: "Lower paper tray is missing or misaligned"
*PrinterError: "OPC drum absent or improperly seated"
*PrinterError: "OPC drum needs replacement"
*PrinterError: "Paper Jam - Clear top output tray"
*PrinterError: "Paper Jam - Open side door to clear paper path"
*PrinterError: "Paper output cover is open"
*PrinterError: "Perform user maintenance"
*PrinterError: "Please clear paper jam caused by fatal engine error"
*PrinterError: "Please clear paper jam caused by fusing unit"
*PrinterError: "Please clear paper jam caused by lower transport station"
*PrinterError: "Please clear paper jam caused by main transport station"
*PrinterError: "Please clear paper jam caused by opened cover"
*PrinterError: "Please clear paper jam caused by upper transport station"
*PrinterError: "Please reboot the PrintServer - FATAL ERROR"
*PrinterError: "Print Engine 100,000 page maintenance required"
*PrinterError: "Print Engine 200,000 page maintenance required"
*PrinterError: "Print Engine 50,000 page maintenance required"
*PrinterError: "Print Engine cover is open"
*PrinterError: "Print Engine developer needs replacement"
*PrinterError: "Print Engine driving unit error"
*PrinterError: "Print Engine drum needs replacement"
*PrinterError: "Print Engine fusing error"
*PrinterError: "Print Engine fusing unit setting is incorrect"
*PrinterError: "Print Engine hardware error: \code\"
*PrinterError: "Print Engine has gone off line"
*PrinterError: "Print Engine is in warmup state"
*PrinterError: "Print Engine is not ready"
*PrinterError: "Print Engine large capacity paper tray is empty"
*PrinterError: "Print Engine large capacity paper tray is jammed"
*PrinterError: "Print Engine lower paper tray is empty"
*PrinterError: "Print Engine lower paper tray is jammed"
*PrinterError: "Print Engine oil supply low"
*PrinterError: "Print Engine optical unit error"
*PrinterError: "Print Engine paper eject section is jammed"
*PrinterError: "Print Engine paper feed unit error"
*PrinterError: "Print Engine power supply unit error"
*PrinterError: "Print Engine toner cartridge setting is incorrect"
*PrinterError: "Print Engine toner supply is exhausted"
*PrinterError: "Print Engine toner supply low"
*PrinterError: "Print Engine transport path setting is incorrect"
*PrinterError: "Print Engine transport section is jammed"
*PrinterError: "Print Engine unknown error status: \code1\, \code2\"
*PrinterError: "Print Engine upper paper tray is empty"
*PrinterError: "Print Engine upper paper tray is jammed"
*PrinterError: "Print engine side cover is open"
*PrinterError: "Printer requires service: code = \service1\ \service2\"
*PrinterError: "Replace OPC drum"
*PrinterError: "Side output tray full"
*PrinterError: "Side tray not correctly positioned"
*PrinterError: "Toner low or not distibuted properly replace: toner"
*PrinterError: "Unavailable paper destination selected"
*PrinterError: "Upper door access paper jam, open top cover"
*PrinterError: "Upper output tray full"
*PrinterError: "Upper paper tray is missing or misaligned"
*PrinterError: "Upper unit cover open, close top cover"

*% Status Messages: copy of PrinterErrors
*Status: "Add toner and Clean components"
*Status: "Call Field Service to correct error"
*Status: "Charge wire cleaning completed"
*Status: "Charge wire cleaning in progress"
*Status: "Check: toner cartridge installation"
*Status: "Cleaning unit absent or improperly seated"
*Status: "Cleaning unit full - needs replacement"
*Status: "Communication with print engine lost -- reboot PrintServer"
*Status: "Developer unit absent or improperly seated"
*Status: "Engine command buffer overflow -- reboot PrintServer"
*Status: "Field Service maintenance required- Call Field Service"
*Status: "Fuser unit absent or improperly seated"
*Status: "General user maintenance, perform:  \maintenance\"
*Status: "Image density adjustment required"
*Status: "Incorrect media in LCIT"
*Status: "Incorrect media in lower paper tray"
*Status: "Incorrect media in upper paper tray"
*Status: "Lower paper tray is missing or misaligned"
*Status: "OPC drum absent or improperly seated"
*Status: "OPC drum needs replacement"
*Status: "Paper Jam - Clear top output tray"
*Status: "Paper Jam - Open side door to clear paper path"
*Status: "Paper output cover is open"
*Status: "Perform user maintenance"
*Status: "Please clear paper jam caused by fatal engine error"
*Status: "Please clear paper jam caused by fusing unit"
*Status: "Please clear paper jam caused by lower transport station"
*Status: "Please clear paper jam caused by main transport station"
*Status: "Please clear paper jam caused by opened cover"
*Status: "Please clear paper jam caused by upper transport station"
*Status: "Please reboot the PrintServer - FATAL ERROR"
*Status: "Print Engine 100,000 page maintenance required"
*Status: "Print Engine 200,000 page maintenance required"
*Status: "Print Engine 50,000 page maintenance required"
*Status: "Print Engine cover is open"
*Status: "Print Engine developer needs replacement"
*Status: "Print Engine driving unit error"
*Status: "Print Engine drum needs replacement"
*Status: "Print Engine fusing error"
*Status: "Print Engine fusing unit setting is incorrect"
*Status: "Print Engine hardware error: \code\"
*Status: "Print Engine has gone off line"
*Status: "Print Engine is in warmup state"
*Status: "Print Engine is not ready"
*Status: "Print Engine large capacity paper tray is empty"
*Status: "Print Engine large capacity paper tray is jammed"
*Status: "Print Engine lower paper tray is empty"
*Status: "Print Engine lower paper tray is jammed"
*Status: "Print Engine oil supply low"
*Status: "Print Engine optical unit error"
*Status: "Print Engine paper eject section is jammed"
*Status: "Print Engine paper feed unit error"
*Status: "Print Engine power supply unit error"
*Status: "Print Engine toner cartridge setting is incorrect"
*Status: "Print Engine toner supply is exhausted"
*Status: "Print Engine toner supply low"
*Status: "Print Engine transport path setting is incorrect"
*Status: "Print Engine transport section is jammed"
*Status: "Print Engine unknown error status: \code1\, \code2\"
*Status: "Print Engine upper paper tray is empty"
*Status: "Print Engine upper paper tray is jammed"
*Status: "Print engine side cover is open"
*Status: "Printer requires service: code = \service1\ \service2\"
*Status: "Replace OPC drum"
*Status: "Side output tray full"
*Status: "Side tray not correctly positioned"
*Status: "Toner low or not distibuted properly replace: toner"
*Status: "Unavailable paper destination selected"
*Status: "Upper door access paper jam, open top cover"
*Status: "Upper output tray full"
*Status: "Upper paper tray is missing or misaligned"
*Status: "Upper unit cover open, close top cover"

*% Other status messages
*Status: "Active"
*Status: "Idle"
*Status: "PrintServer is currently disabled and cannot accept jobs"
*Status: "Printer is paused (job is pending)"
*Status: "Printer is resuming"

*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"

*% Color Separation Information =====================

*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 60 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*%  For 53 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"

*% For "PrintServer 40 Plus" version 48.3 
*% Produced by "bldppd4.0L1.ps"
*% Last Edit Date: Jun 23 1993
*% The byte count of this file should be exactly 020099 or 020591
*% depending on the filesystem it resides in.
*% end of PPD file for PrintServer 40 Plus