windows-server-2003/printscan/print/drivers/usermode/ppd/usa/dpl85501.ppd

*PPD-Adobe: "4.0"
*% PostScript(R) Printer Description File
*% PostScript is a registered trademark of Adobe systems corp.
*% All Rights Reserved.
*FormatVersion: "4.0"
*FileVersion: "2.2"
*PCFileName: "DPL85501.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 855)"
*PSVersion: "(1.0) 0"
*ModelName: "Dataproducts LZR 855"
*NickName: "Dataproducts LZR 855 v1.0"
*ShortNickName: "Dataproducts LZR 855 v1.0"

*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed

*OpenUI *Option1/Optional Envelope Feeder: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1

*CloseGroup: InstallableOptions

*UIConstraints: *Option1 False *InputSlot Envelope

*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "353088"
*LanguageLevel: "1"
*Extensions: FileSystem
*VariablePaperSize: False
*FileSystem: True
*?FileSystem: "
save
  statusdict /diskonline get exec {(True)}{(False)} ifelse = flush
restore
"
*End
*Throughput: "8"
*Password: "0"
*ExitServer: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  serverdict /exitserver get exec
"
*End

*Reset: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  serverdict /exitserver get exec
  systemdict /quit get exec
  (WARNING : Printer Reset Failed.) = flush
"
*End

*DefaultResolution: 300dpi
*Resolution 300dpi: "300 statusdict /setresolution get exec"
*?Resolution: "
save
  initgraphics
  0 0 moveto currentpoint matrix defaultmatrix transform
  0 72 lineto currentpoint matrix defaultmatrix transform
  3 -1 roll sub dup mul
  3 1 roll exch sub dup mul
  add sqrt round cvi
  (          ) cvs print (dpi) = flush
restore
"
*End

*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"

*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "letter"
*PageSize Legal: "legal"
*PageSize A4: "a4"
*PageSize Comm10: "com10envelope"
*PageSize Monarch: "monarcenvelope"
*PageSize DL: "dlenvelope"
*PageSize C5: "c5envelope"
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion A4: "a4"
*PageRegion Comm10: "com10envelope"
*PageRegion Monarch: "monarcenvelope"
*PageRegion DL: "dlenvelope"
*PageRegion C5: "c5envelope"
*CloseUI: *PageRegion

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 8 597 784"
*ImageableArea Legal: "20 15 597 993"
*ImageableArea A4: "17 15 583 832"
*ImageableArea Comm10: "15 15 282 669"
*ImageableArea Monarch: "13 14 266 529"
*ImageableArea DL: "14 8 297 616"
*ImageableArea C5: "14 10 452 642"

*?ImageableArea: "
save
  /cvp {(                ) cvs print ( ) print } bind def
  /upperright {10000 mul floor 10000 div} bind def
  /lowerleft {10000 mul ceiling 10000 div} bind def
  newpath clippath pathbbox
  4 -2 roll exch 2 {lowerleft cvp} repeat
  exch 2 {upperright cvp} repeat flush
restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension A4: "595 842"
*PaperDimension Comm10: "297 684"
*PaperDimension Monarch: "279 540"
*PaperDimension DL: "312 624"
*PaperDimension C5: "459 649"

*DefaultOutputOrder: Normal
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper/Upper tray: "0 statusdict /setpapertray get exec"
*InputSlot Tray2/Lower tray: "1 statusdict /setpapertray get exec"
*InputSlot Envelope/Envelope feeder: "0 statusdict /setpapertray get exec"
*?InputSlot: "
save
  [ (Upper) (Lower) (Envelope) ]
  statusdict /papertray get exec
  {get exec} stopped { pop pop (Unknown)} if = flush
restore
"
*End
*CloseUI: *InputSlot

*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
  statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
"
*End
*CloseUI: *ManualFeed

*OpenUI *OutputOrder: PickOne
*OrderDependency: 50 AnySetup *OutputOrder
*OutputOrder Normal: "0 statusdict /setoutputtray get exec"
*OutputOrder Reverse: "1 statusdict /setoutputtray get exec"
*?OutputOrder: "
save
  [ (Normal) (Reverse) ] statusdict /outputtray get exec
  {get exec} stopped {pop pop (Unknown)} if = flush
restore
"
*End
*CloseUI: *OutputOrder


*PageStackOrder Upper: Normal
*PageStackOrder Lower: Reverse

*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.001)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.001)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.001)" Standard ROM
*Font Bookman-Demi: Standard "(001.001)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.001)" Standard ROM
*Font Bookman-Light: Standard "(001.001)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.001)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.004)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.004)" Standard ROM
*Font Courier-Oblique: Standard "(001.004)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard ROM
*Font Palatino-Bold: Standard "(001.001)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.001)" Standard ROM
*Font Palatino-Italic: Standard "(001.002)" Standard ROM
*Font Palatino-Roman: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.002)" Standard ROM
*Font ZapfDingbats: Special "(001.000)" Special ROM
*?FontQuery: "
save
{
  count 1 gt {
  exch dup 128 string cvs (/) print print (:) print
  dup FontDirectory exch known {pop (Yes)}
  {
    (fonts/                              )
      dup 3 -1 roll 128 string cvs dup length /len exch def
      6 exch putinterval
      0 len 6 add getinterval mark exch
      { } 128 string filenameforall counttomark 0 gt {
      cleartomark (Yes)}{cleartomark (No)}ifelse
      }ifelse = flush
      }{ exit } ifelse
  } bind loop
  (*) = flush
restore
"
*End

*?FontList: "
save
  FontDirectory { pop == } bind forall flush
  /filenameforall where {
    pop (fonts/*) {
    dup length 6 sub 6 exch getinterval cvn ==
    } bind
    128 string filenameforall flush
  } if
  (*) = flush
restore
"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*Message: "%%[ Operator reset, flushing job to end-of-file ]%%"
*Message: "%%[ Waiting for manual feed ]%%"
*Message: "%%[ Fuser near expiration ]%%"
*Message: "%%[ Developer near expiration ]%%"
*Message: "%%[ Drum near expiration ]%%"

*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "initializing"
*Status: "printing test page"
*Status: "processing first job"
*Status: "PrinterError: controller not responding"
*Status: "PrinterError: Resetting Printer"
*Status: "PrinterError: Adding Toner"
*Status: "PrinterError: Test Print/Maintenance"
*Status: "PrinterError: Warming Up"
*Status: "PrinterError: Developer Cart Not Installed"
*Status: "PrinterError: Exit Tray Full"
*Status: "PrinterError: Main Cassette Out of Paper"
*Status: "PrinterError: Upper Cassette Out of Paper"
*Status: "PrinterError: Lower Cassette Out of Paper"
*Status: "PrinterError: Envelope Feeder Out of Paper"
*Status: "PrinterError: Manual Feed Timeout"
*Status: "PrinterError: Envelope Feeder Misfeed"
*Status: "PrinterError: Manual Feed Paper Misfeed"
*Status: "PrinterError: Face Up Exit Tray Misfeed"
*Status: "PrinterError: Face Down Exit Tray Misfeed"
*Status: "PrinterError: Lower Cassette Misfeed"
*Status: "PrinterError: Upper Cassette Misfeed"
*Status: "PrinterError: Main Cassette Misfeed"
*Status: "PrinterError: Out of Toner"
*Status: "PrinterError: Cover Open"
*Status: "PrinterError: Drum Cartridge Not Installed"
*Status: "PrinterError: Fuser Cartridge Not Installed"
*Status: "PrinterError: Developer Life Expired"
*Status: "PrinterError: Drum Life Expired"
*Status: "PrinterError: Fuser Life Expired"
*Status: "PrinterError: New Developer Cartridge"
*Status: "PrinterError: Main Charger Not Installed"
*Status: "PrinterError: Developer Over-Toned"
*Status: "PrinterError: Fuser Cartridge Fault"
*Status: "PrinterError: Laser Scan Signal Not Detected"
*Status: "PrinterError: Mirror Motor Fault"
*Status: "PrinterError: Laser Fault"
*Status: "PrinterError: Main Motor Fault"
*Status: "PrinterError: H/W: Remove NVM Access Jumper"
*Status: "PrinterError: H/W: Toner Recycling Motor Flt"
*Status: "PrinterError: H/W: I/F Timing Fault"
*Status: "PrinterError: H/W: Envelope Feed Motor Fault"
*Status: "PrinterError: H/W: Env Gate Cam Sensor Undet"
*Status: "PrinterError: H/W: M-Cas Algn Cam Sen Undet"
*Status: "PrinterError: H/W: M-Cas Feed Cam Sen Undet"
*Status: "PrinterError: H/W: Main Logic CCA Fault"

*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "Centronics"
*Source: "AppleTalk"

*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "controller not responding"
*PrinterError: "Resetting Printer"
*PrinterError: "Adding Toner"
*PrinterError: "Test Print/Maintenance"
*PrinterError: "Warming Up"
*PrinterError: "Developer Cart Not Installed"
*PrinterError: "Exit Tray Full"
*PrinterError: "Main Cassette Out of Paper"
*PrinterError: "Upper Cassette Out of Paper"
*PrinterError: "Lower Cassette Out of Paper"
*PrinterError: "Envelope Feeder Out of Paper"
*PrinterError: "Manual Feed Timeout"
*PrinterError: "Envelope Feeder Misfeed"
*PrinterError: "Manual Feed Paper Misfeed"
*PrinterError: "Face Up Exit Tray Misfeed"
*PrinterError: "Face Down Exit Tray Misfeed"
*PrinterError: "Lower Cassette Misfeed"
*PrinterError: "Upper Cassette Misfeed"
*PrinterError: "Main Cassette Misfeed"
*PrinterError: "Out of Toner"
*PrinterError: "Cover Open"
*PrinterError: "Drum Cartridge Not Installed"
*PrinterError: "Fuser Cartridge Not Installed"
*PrinterError: "Developer Life Expired"
*PrinterError: "Drum Life Expired"
*PrinterError: "Fuser Life Expired"
*PrinterError: "New Developer Cartridge"
*PrinterError: "Main Charger Not Installed"
*PrinterError: "Developer Over-Toned"
*PrinterError: "Fuser Cartridge Fault"
*PrinterError: "Laser Scan Signal Not Detected"
*PrinterError: "Mirror Motor Fault"
*PrinterError: "Laser Fault"
*PrinterError: "Main Motor Fault"
*PrinterError: "H/W: Remove NVM Access Jumper"
*PrinterError: "H/W: Toner Recycling Motor Flt"
*PrinterError: "H/W: I/F Timing Fault"
*PrinterError: "H/W: Envelope Feed Motor Fault"
*PrinterError: "H/W: Env Gate Cam Sensor Undet"
*PrinterError: "H/W: M-Cas Algn Cam Sen Undet"
*PrinterError: "H/W: M-Cas Feed Cam Sen Undet"
*PrinterError: "H/W: Main Logic CCA Fault"

*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"

*% Color Separation Information =====================

*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*% For 60 lpi / 300 dpi =====================================================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*% For 53 lpi / 300 dpi =====================================================

*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"

*% For "Dataproducts LZR 855" version 1.0
*% Converted to meet 4.0 specification
*% Last Edit Date: 7/25/93
*% The byte count of this file should be exactly 021269 or 021780
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 855