windows-server-2003/printscan/print/drivers/usermode/ppd/usa/gcblpel1.ppd

*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% Copyright 1993 GCC Technologies, Inc.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*% Modified by Microsoft 1/22/99 a-roblow Added LanguageLevel
*% 02/05/99 Microsoft: Option1 is InstalledMemory
*FormatVersion: "4.0"
*FileVersion: "1.22"
*PCFileName: "GCBLPEL1.PPD"
*LanguageVersion: English
*Manufacturer: "GCC"
*Product: "(BLP Elite)"
*PSVersion: "(52.3) 1"
*NickName: "GCC BLP Elite v52.3"
*ModelName: "GCC BLP Elite"

*% General Information and Defaults ===============
*FreeVM: "450446"
*VMOption None: "450446"
*VMOption 4Meg: "2546634"
*OpenGroup: InstallableOptions
*OpenUI *InstalledMemory/Memory Configuration: PickOne
*DefaultInstalledMemory: None
*InstalledMemory None/2 MB: ""
*InstalledMemory 4Meg/4 MB: ""
*CloseUI: *InstalledMemory
*OpenUI *Option2/Lower Tray: Boolean
*DefaultOption2: False
*Option2 True/Installed: ""
*Option2 False/Not Installed: ""
*CloseUI: *Option2
*CloseGroup: InstallableOptions

*%UIConstraints: *Option1 None *VMOption
*UIConstraints: *InstalledMemory 4Meg *VMOption None
*UIConstraints: *Option2 False *InputSlot Lower
*UIConstraints: *InputSlot Lower *ManualFeed True
*UIConstraints: *ManualFeed True *InputSlot Lower

*ColorDevice: False
*LanguageLevel: "1"
*DefaultColorSpace: Gray
*VariablePaperSize: False
*FileSystem: False
*Throughput: "4"
*Password: "0"
*ExitServer: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup	% potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  serverdict /exitserver get exec
"
*End
*Reset: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup	% potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  serverdict /exitserver get exec
  systemdict /quit get exec
  (WARNING : Printer Reset Failed.) = flush
"
*End

*DefaultResolution: 300dpi
*?Resolution: "
save
  initgraphics
  0 0 moveto currentpoint matrix defaultmatrix transform
  0 72 lineto currentpoint matrix defaultmatrix transform
  3 -1 roll sub dup mul
  3 1 roll exch sub dup mul
  add sqrt round cvi
  (          ) cvs print (dpi) = flush
restore
"
*End

*% Halftone Information ===============
*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"

*% Paper Handling ===================

*% Use these entries to set paper size most of the time.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec legal"
*PageSize Executive: "statusdict /executivetray get exec"
*PageSize A4: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B5: "statusdict /b5tray get exec"
*PageSize LetterSmall: "statusdict /lettertray get exec lettersmall"
*PageSize LegalSmall: "statusdict /legaltray get exec legalsmall"
*PageSize A4Small: "statusdict /a4tray get exec a4small"
*PageSize Comm10: "statusdict /com10tray get exec"
*PageSize DL: "statusdict /dltray get exec"
*PageSize Monarch: "statusdict /monarchtray get exec"
*PageSize C5: "statusdict /c5tray get exec"
*?PageSize: "
 save
  13 dict
   dup /letter (Letter) put
   dup /executivepage (Executive) put
   dup /legal (Legal) put
   dup /c5 (C5) put
   dup /monarch (Monarch) put
   dup /a4 (A4) put
   dup /dl (DL) put
   dup /a5 (A5) put
   dup /com10 (Comm10) put
   dup /b5 (B5) put
   dup /lettersmall (LetterSmall) put
   dup /legalsmall (LegalSmall) put
   dup /a4small (A4Small) put
begin
   statusdict /papersize get exec {
     {load exec} stopped not{= flush}if
   }{
     {load exec} stopped not{print (.Transverse) = flush}{(Unknown) = flush}ifelse
   }ifelse
end
 restore
"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion Executive: "executivepage"
*PageRegion A4: "a4"
*PageRegion A5: "a5"
*PageRegion B5: "b5"
*PageRegion LetterSmall: "lettersmall"
*PageRegion LegalSmall: "legalsmall"
*PageRegion A4Small: "a4small"
*PageRegion Comm10: "com10"
*PageRegion DL: "dl"
*PageRegion Monarch: "monarch"
*PageRegion C5: "c5"
*CloseUI: *PageRegion

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "1 1 611 779"
*ImageableArea Legal: "1 1 611 995"
*ImageableArea Executive: "2 1 520 743"
*ImageableArea A4: "0 1 594 828"
*ImageableArea A5: "2 1 419 582"
*ImageableArea B5: "1 1 515 715"
*ImageableArea LetterSmall: "30 31 582 761"
*ImageableArea LegalSmall: "30 31 582 976"
*ImageableArea A4Small: "29 31 566 811"
*ImageableArea Comm10: "1 1 296 671"
*ImageableArea DL: "1 1 311 610"
*ImageableArea Monarch: "2 1 277 527"
*ImageableArea C5: "2 1 457 636"
*?ImageableArea: "
save
  /cvp {(                ) cvs print ( ) print } bind def
  /upperright {10000 mul floor 10000 div} bind def
  /lowerleft {10000 mul ceiling 10000 div} bind def
  newpath clippath pathbbox
  4 -2 roll exch 2 {lowerleft cvp} repeat
  exch 2 {upperright cvp} repeat flush
 restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Executive: "521 756"
*PaperDimension A4: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B5: "516 729"
*PaperDimension LetterSmall: "612 792"
*PaperDimension LegalSmall: "612 1008"
*PaperDimension A4Small: "595 842"
*PaperDimension Comm10: "297 684"
*PaperDimension DL: "312 623"
*PaperDimension Monarch: "278 540"
*PaperDimension C5: "458 649"

*DefaultOutputBin: Upper
*DefaultOutputOrder: Normal

*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot:  Upper
*InputSlot Upper: "0 statusdict  /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*CloseUI: *InputSlot

*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*?ManualFeed: "save
  statusdict /manualfeed get
  {(True)}{(False)}ifelse = flush
  restore"
*End
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*CloseUI: *ManualFeed

*% Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(002.002)" Standard ROM
*Font Courier-Bold: Standard "(002.002)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.002)" Standard ROM
*Font Courier-Oblique: Standard "(002.002)" Standard ROM
*Font Helvetica: Standard "(001.006)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*Font Times-Bold: Standard "(001.007)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009)" Standard ROM
*Font Times-Italic: Standard "(001.007)" Standard ROM
*Font Times-Roman: Standard "(001.007)" Standard ROM
*?FontQuery: "
save
 /str 100 string dup 0 (fonts/) putinterval def
 {
   count 1 gt
   {
	 exch dup str 6 94 getinterval cvs
	 (/) print print (:) print
	 FontDirectory exch known
	 {(Yes)}{(No)} ifelse =
   }
   {exit} ifelse
 }bind loop
 (*) = flush
restore
"
*End

*?FontList: "
save
  FontDirectory { pop == } bind forall flush
  (*) = flush
restore
"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: timeout, clearing printer"
*Status: "PrinterError: WARMING UP"
*Status: "PrinterError: COVER OPEN"
*Status: "PrinterError: service call"
*Status: "PrinterError: PAPER FEED JAM1"
*Status: "PrinterError: PAPER FEED JAM2"
*Status: "PrinterError: no toner cartridge"
*Status: "PrinterError: PAPER JAM1"
*Status: "PrinterError: PAPER JAM2"

*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"

*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "timeout, clearing printer"
*PrinterError: "WARMING UP"
*PrinterError: "COVER OPEN"
*PrinterError: "service call"
*PrinterError: "PAPER FEED JAM1"
*PrinterError: "PAPER FEED JAM2"
*PrinterError: "no toner cartridge"
*PrinterError: "PAPER JAM1"
*PrinterError: "PAPER JAM2"

*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"

*% Color Separation Information =====================

*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 60 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*%  For 53 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"

*% Last Edit Date: Jun 01 1993
*% The byte count of this file should be exactly 011879 or 012249
*% depending on the filesystem it resides in.
*% end of PPD file for BLP Elite