windows-server-2003/printscan/print/drivers/usermode/ppd/usa/ibm17523.ppd

*PPD-Adobe: "4.2"
*% Adobe Systems PostScript(R) Printer Description File
*% For IBM LaserPrinter 4019
*% For use with Windows NT
*% Produced by Lexmark International, Inc.
*%
*% Copyright (c) 1993-1996 Lexmark International Inc.  All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the content
*% of the file is not altered in any way from its original form.
*%
*%

*FormatVersion: "4.2"
*FileVersion: "3.3"
*LanguageVersion: English
*PCFileName: "IBM17523.PPD"
*Product: "(IBM LaserPrinter)"
*PSVersion: "(52.1) 0"
*PSVersion: "(52.3) 0"
*ModelName: "IBM 4019 LaserPrinter PS17"
*ShortNickName: "IBM 4019 LaserPrinter PS17"
*NickName: "IBM 4019 LaserPrinter PS17"

*% === Options and Constraints ============

*OpenGroup: InstallableOptions/Options Installed

*OpenUI *Option1/Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1

*OpenUI *Option2/Envelope Feeder: Boolean
*DefaultOption2: False
*Option2 True/Installed: ""
*Option2 False/Not Installed: ""
*CloseUI: *Option2

*OpenUI *Option3/Printer Memory: PickOne
*DefaultOption3: 1Meg
*Option3 1Meg/1.5 Mb Printer Memory: ""
*Option3 2Meg/2.5 Mb Printer Memory: ""
*Option3 4Meg/4 Mb Printer Memory: ""
*CloseUI: *Option3

*CloseGroup: InstallableOptions

*UIConstraints: *Option1 False *InputSlot Lower
*UIConstraints: *Option1 False *TraySwitch On
*UIConstraints: *Option2 False *InputSlot Envelope

*% === Basic Capabilities ============

*LanguageLevel: "1"
*FreeVM: "200000"
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: False
*FileSystem: False
*Throughput: "10"
*Password: "0"
*ExitServer: "
 count 0 eq   % is the password on the stack?
 { true }
 { dup        % potential password
   statusdict /checkpassword get exec not
 } ifelse
 {  %  if no password or not valid
   (WARNING : Cannot perform the exitserver command.) =
   (Password supplied is not valid.) =
   (Please contact the author of this software.) = flush
   quit
 } if
 serverdict /exitserver get exec
 "
*End
*Reset: "
 count 0 eq  % is the password on the stack?
 { true }
 { dup      % potential password
   statusdict /checkpassword get exec not
 } ifelse
 {  %  if no password or not valid
   (WARNING : Cannot reset printer.) =
   (Password supplied is not valid.) =
   (Please contact the author of this software.) = flush
   quit
 } if
 serverdict /exitserver get exec
 systemdict /quit get exec
 (WARNING : Printer Reset Failed.) = flush
 "
*End

*% === Resolution ============
*OpenUI *Resolution/Resolution: PickOne
*DefaultResolution: 300dpi
*Resolution 300dpi/300 dpi: ""
*?Resolution: "
 save initgraphics
 0 0 moveto currentpoint matrix defaultmatrix transform
 0 72 lineto currentpoint matrix defaultmatrix transform
 3 -1 roll sub dup mul
 3  1 roll exch sub dup mul
 add sqrt round cvi (          ) cvs print (dpi) = flush
 restore
 "
*End
*CloseUI: *Resolution

*% === Halftone Information ===============

*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
 {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
 sub }{dup mul exch dup mul add 1 exch sub }ifelse }
 "
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"

*% === Paper Handling ===================

*% Code in this section selects a tray and sets up a frame buffer.
*OpenUI *PageSize:  PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "statusdict begin {lettertray}stopped {3 setpapertray letter}if end"
*PageSize Legal/Legal: "statusdict begin {legaltray}stopped {3 setpapertray legal}if end"
*PageSize Executive/Executive: "
 statusdict begin {executivetray}stopped {3 setpapertray executivepage}if end"
*End
*PageSize A4/A4: "statusdict begin {a4tray}stopped {3 setpapertray a4}if end"
*PageSize A5/A5: "statusdict begin {a5tray}stopped {3 setpapertray a5}if end"
*PageSize B5/B5: "statusdict begin {b5tray}stopped {3 setpapertray b5}if end"
*PageSize Monarch/Monarch Envelope: "
 statusdict begin {3.875x7.5envelopetray}stopped
 {4 setpapertray 3.875x7.5envelope}if end
 279 540 translate 180 rotate"
*End
*PageSize C9/C9 Envelope: "
 statusdict begin {3.875x8.875envelopetray}stopped
 {4 setpapertray 3.875x8.875envelope}if end
 279 639 translate 180 rotate"
*End
*PageSize Comm10/C10 Envelope: "
 statusdict begin {4.125x9.5envelopetray}stopped
 {4 setpapertray 4.125x9.5envelope}if end
 297 684 translate 180 rotate"
*End
*PageSize DL/DL Envelope: "
 statusdict begin {110x220envelopetray}stopped
 {4 setpapertray 110x220envelope}if end
 312 624 translate 180 rotate"
*End
*PageSize C5/C5 Envelope: "
 statusdict begin {162x229envelopetray}stopped
 {4 setpapertray 162x229envelope}if end
 459 649 translate 180 rotate"
*End
*PageSize ISOB5/B5 Envelope: "
 statusdict begin {176x250envelopetray}stopped
 {4 setpapertray 176x250envelope}if end
 499 709 translate 180 rotate"
*End
*?PageSize: "
 save
 12 dict
   dup /letter (Letter) put
   dup /legal (Legal) put
   dup /executivepage (Executive) put
   dup /a4 (A4) put
   dup /a5 (A5) put
   dup /b5 (B5) put
   dup /3.875x7.5envelope (Monarch) put
   dup /3.875x8.875envelope (Envelope.279.639) put
   dup /4.125x9.5envelope (Comm10) put
   dup /110x220envelope (DL) put
   dup /162x229envelope (C5) put
   dup /176x250envelope (Envelope.499.709) put
 statusdict /papersize get exec
 3 1 roll  {get} stopped {(Unknown)}if
 exch  not { print (.Transverse) }if
 = flush
 restore
 "
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion:  PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "letter"
*PageRegion Legal/Legal: "legal"
*PageRegion Executive/Executive: "executivepage"
*PageRegion A4/A4: "a4"
*PageRegion A5/A5: "a5"
*PageRegion B5/B5: "b5"
*PageRegion Monarch/Monarch Envelope: "3.875x7.5envelope 279 540 translate 180 rotate"
*PageRegion C9/C9 Envelope: "3.875x8.875envelope 279 639 translate 180 rotate"
*PageRegion Comm10/C10 Envelope: "4.125x9.5envelope 297 684 translate 180 rotate"
*PageRegion DL/DL Envelope: "110x220envelope 312 624 translate 180 rotate"
*PageRegion C5/C5 Envelope: "162x229envelope 459 649 translate 180 rotate"
*PageRegion ISOB5/B5 Envelope: "176x250envelope 499 709 translate 180 rotate"
*CloseUI: *PageRegion

*DefaultImageableArea: Letter
*ImageableArea Letter:    "18 17 597 776"
*ImageableArea Legal:     "18 18 597 992"
*ImageableArea Executive: "18 18 505 740"
*ImageableArea A4:        "18 19 578 827"
*ImageableArea A5:        "18 13 405 580"
*ImageableArea B5:        "18 18 505 711"
*ImageableArea Monarch:   "1 13 260 526"
*ImageableArea C9:        "1 16 260 623"
*ImageableArea Comm10:    "3 16 278 668"
*ImageableArea DL:        "3 16 293 608"
*ImageableArea C5:        "4 16 440 634"
*ImageableArea ISOB5:     "2 15 480 693"
*?ImageableArea: "
 save
 /cvp { (                ) cvs print ( ) print } bind def
 /upperright {10000 mul floor 10000 div} bind def
 /lowerleft {10000 mul ceiling 10000 div} bind def
 newpath clippath pathbbox
 4 -2 roll exch 2 {lowerleft cvp} repeat
 exch 2 {upperright cvp} repeat flush
 restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter:    "612 792"
*PaperDimension Legal:     "612 1008"
*PaperDimension Executive: "522 756"
*PaperDimension A4:        "595 842"
*PaperDimension A5:        "420 595"
*PaperDimension B5:        "516 729"
*PaperDimension Monarch:   "279 540"
*PaperDimension C9:        "279 639"
*PaperDimension Comm10:    "297 684"
*PaperDimension DL:        "312 624"
*PaperDimension C5:        "459 649"
*PaperDimension ISOB5:     "499 709"

*RequiresPageRegion All: True
*OpenUI *InputSlot:  PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Unknown
*InputSlot Upper/Upper Tray: "0 statusdict /setpapertray get exec"
*InputSlot Lower/Lower Tray: "
 statusdict begin optionalfeeder { 1 }{ 0 }ifelse setpapertray end"
*End
*InputSlot Envelope/Envelope Feeder: "
 statusdict begin envelopefeeder { 2 }{ 3 }ifelse setpapertray end"
*End
*InputSlot EnvelopeManual/Manual Envelope: "4 statusdict /setpapertray get exec"
*?InputSlot: "
 save
 [ (Upper) (Lower) (Envelope) (Manual) (ManualEnvelope) ] statusdict /papertray get exec
 {get exec} stopped { pop pop (Unknown) } if = flush
 restore
 "
*End
*CloseUI: *InputSlot

*OpenUI *ManualFeed/Manual Paper: Boolean
*OrderDependency: 15 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True/On: "3 statusdict /setpapertray get exec"
*ManualFeed False/Off: "statusdict /manualfeed false put"
*?ManualFeed: "
 save
 statusdict /manualfeed get {(True)}{(False)}ifelse = flush
 restore
 "
*End
*CloseUI: *ManualFeed

*OpenUI *TraySwitch/Tray Linking: PickOne
*OrderDependency: 50 AnySetup *TraySwitch
*DefaultTraySwitch: PrtSet
*TraySwitch PrtSet/Printer Setting:  ""
*TraySwitch On/On:  "statusdict /trayswitch true put"
*TraySwitch Off/Off: "statusdict /trayswitch false put"
*?TraySwitch: "
 save
 statusdict /trayswitch get {(True)}{(False)}ifelse = flush
 restore
 "
*End
*CloseUI: *TraySwitch

*DefaultOutputOrder: Normal
*OutputOrder Normal: ""
*OutputOrder Reverse: ""

*% === Font Information =====================

*DefaultFont: Courier
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.004)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.004)" Standard  ROM
*Font Courier-Oblique: Standard "(001.004)" Standard ROM
*Font Helvetica: Standard "(001.002)" Standard       ROM
*Font Helvetica-Bold: Standard "(001.002)" Standard  ROM
*Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.002)" Standard  ROM
*Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard  ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.002)" Standard  ROM
*Font Symbol: Special "(001.003)" Special  ROM
*Font Times-Bold: Standard "(001.002)" Standard  ROM
*Font Times-BoldItalic: Standard "(001.004)" Standard ROM
*Font Times-Italic: Standard "(001.002)" Standard    ROM
*Font Times-Roman: Standard "(001.002)" Standard   ROM
*?FontQuery: "
 save
 /str 100 string dup 0 (fonts/) putinterval def
 { count 1 gt
   { exch dup str 6 94 getinterval cvs
     (/) print print (:) print
     FontDirectory exch known
     {(Yes)}{(No)} ifelse =
   }
   {exit} ifelse
 }bind loop
 (*) = flush
 restore
 "
*End

*?FontList: "save FontDirectory { pop == } bind forall flush (*) = flush restore"

*% Printer Messages (verbatim from printer):
*Message: "%%  exitserver: permanent state may be changed  %%"
*Message: "%%  Flushing: rest of job (to end-of-file) will be ignored  %%"
*Message: "FontName\ not found, using Courier"

*% Status (format: %%  status: <one of these>  %% )
*Status: "Printer Busy"
*Status: "Warming Up"
*Status: "PrinterError: Printer Offline"
*Status: "PrinterError: Paper Out or Feed Failure - Tray 1"
*Status: "PrinterError: Paper Out or Feed Failure - Tray 2"
*Status: "PrinterError: Paper Out or Feed Failure - Envelope Feeder"
*Status: "PrinterError: Load Paper Requested"
*Status: "PrinterError: Load Envelope Requested"
*Status: "PrinterError: Invalid Manual Insertion"
*Status: "PrinterError: Wrong Paper Length"
*Status: "PrinterError: Paper Jam"
*Status: "PrinterError: Cover Open/Cartridge Not Installed"
*Status: "PrinterError: Output Bin Full"
*Status: "PrinterError: Default Storage Error"
*Status: "PrinterError: Battery Low - Slot 1"
*Status: "PrinterError: Battery Low - Slot 2"
*Status: "PrinterError: Non-Download Font Card Installed - Slot 1"
*Status: "PrinterError: Non-Download Font Card Installed - Slot 2"
*Status: "PrinterError: Write-Protect Switch in Protect Position - Slot 1"
*Status: "PrinterError: Write-Protect Switch in Protect Position - Slot 2"
*Status: "PrinterError: Defective or Unprogrammed Card Installed - Slot 1"
*Status: "PrinterError: Defective or Unprogrammed Card Installed - Slot 2"
*Status: "PrinterError: Defective Font Card Installed - Slot 1"
*Status: "PrinterError: Defective Font Card Installed - Slot 2"
*Status: "PrinterError: Unsupported Card Installed - Slot 1"
*Status: "PrinterError: Unsupported Card Installed - Slot 2"
*Status: "PrinterError: Printer Busy"
*Status: "PrinterError: Printer Error"

*% Input Sources (format: %%  status: <stat>; source: <one of these>  %% )
*Source: "serial9"
*Source: "serial25"
*Source: "Centronics"

*% Printer Error (format: %%  PrinterError: <one of these>  %%)
*PrinterError: "Printer Offline"
*PrinterError: "Paper Out or Feed Failure - Tray 1"
*PrinterError: "Paper Out or Feed Failure - Tray 2"
*PrinterError: "Paper Out or Feed Failure - Envelope Feeder"
*PrinterError: "Load Paper Requested"
*PrinterError: "Load Envelope Requested"
*PrinterError: "Invalid Manual Insertion"
*PrinterError: "Wrong Paper Length"
*PrinterError: "Paper Jam"
*PrinterError: "Cover Open/Cartridge Not Installed"
*PrinterError: "Output Bin Full"
*PrinterError: "Default Storage Error"
*PrinterError: "Battery Low - Slot 1"
*PrinterError: "Battery Low - Slot 2"
*PrinterError: "Non-Download Font Card Installed - Slot 1"
*PrinterError: "Non-Download Font Card Installed - Slot 2"
*PrinterError: "Write-Protect Switch in Protect Position - Slot 1"
*PrinterError: "Write-Protect Switch in Protect Position - Slot 2"
*PrinterError: "Defective or Unprogrammed Card Installed - Slot 1"
*PrinterError: "Defective or Unprogrammed Card Installed - Slot 2"
*PrinterError: "Defective Font Card Installed - Slot 1"
*PrinterError: "Defective Font Card Installed - Slot 2"
*PrinterError: "Unsupported Card Installed - Slot 1"
*PrinterError: "Unsupported Card Installed - Slot 2"
*PrinterError: "Printer Busy"
*PrinterError: "Printer Error"

*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"

*% === Color Separation Information =====================

*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 60 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*%  For 53 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"

*% End of PPD file for IBM LaserPrinter 4019