windows-server-2003/printscan/print/drivers/usermode/ppd/usa/l500_493.ppd

*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1993 Adobe Systems Incorporated. 
*% All Rights Reserved. 
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "2.4"
*PCFileName: "L500_493.PPD"
*LanguageVersion: English
*Product: "(Linotype)"
*PSVersion: "(49.3) 106"
*ModelName: "Linotronic 500 v49.3"
*NickName: "Linotronic 500 v49.3"

*% General Information and Defaults ===============
*FreeVM: "992406"
*LanguageLevel: "1"
*Extensions: FileSystem CMYK
*ColorDevice: False
*DefaultColorSpace: Gray
*VariablePaperSize: True
*FileSystem: True
*?FileSystem: "
save
  statusdict /diskonline get exec {(True)}{(False)} ifelse = flush
restore
"
*End
*Password: "0"
*ExitServer: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  serverdict /exitserver get exec
"
*End

*Reset: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  serverdict /exitserver get exec
  systemdict /quit get exec
  (WARNING : Printer Reset Failed.) = flush
"
*End

*DefaultResolution: 1270dpi
*SetResolution 635dpi: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot set the resolution.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  256 string
  statusdict /li5backendparams get exec
  length 0 eq
  {
    (WARNING : Cannot set the resolution through software) = flush
    quit
  } if
  serverdict /exitserver get exec
635 statusdict /setresolution get exec
"
*End
*SetResolution 1270dpi: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot set the resolution.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  256 string
  statusdict /li5backendparams get exec
  length 0 eq
  {
    (WARNING : Cannot set the resolution through software) = flush
    quit
  } if
  serverdict /exitserver get exec
1270 statusdict /setresolution get exec
"
*End
*SetResolution 1693dpi: "
  count 0 eq {  % is the password on the stack?
    true
  }{
    dup    % potential password
    statusdict /checkpassword get exec not
  } ifelse
  {  %  if no password or not valid
    (WARNING : Cannot set the resolution.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
  } if
  256 string
  statusdict /li5backendparams get exec
  length 0 eq
  {
    (WARNING : Cannot set the resolution through software) = flush
    quit
  } if
  serverdict /exitserver get exec
1693 statusdict /setresolution get exec
"
*End
*?Resolution: "
save
  statusdict /resolution get exec
  (          ) cvs print (dpi) = flush
restore
"
*End

*% Halftone Information ===============
*ScreenFreq: "150.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }
"
*End
*ScreenProc Line: "{ pop }"

*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"

*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter.Transverse
*PageSize Letter.Transverse: "Letter"
*PageSize Ledger: "ledger"
*PageSize A4.Transverse: "A4"
*PageSize A5.Transverse: "A5"
*PageSize ISOB5.Transverse: "B5"
*PageSize Letter: "letter"
*PageSize Legal: "legal"
*PageSize Tabloid: "11x17"
*PageSize A3: "a3"
*PageSize A4: "a4"
*PageSize A5: "a5"
*PageSize ISOB5: "b5"
*?PageSize: "
 save
 mark  statusdict /pageparams get exec  exch pop
  7 dict
     dup [612 792] (Letter) put
     dup [612 1008] (Legal) put
     dup [792 1224] (Tabloid) put
     dup [840 1191] (A3) put
     dup [596 842] (A4) put
     dup [420 596] (A5) put
     dup [499 709] (ISOB5) put
  5 dict
     dup [792 612] (Letter.Transverse) put
     dup [792 1224] (Ledger) put
     dup [842 596] (A4.Transverse) put
     dup [596 420] (A5.Transverse) put
     dup [709 499] (ISOB5.Transverse) put
  3 -1 roll 1 eq { pop } { exch pop }ifelse
  (Unknown) exch
  { exch aload pop
    4 index eq exch 5 index eq and
    { exch pop exit } { pop } ifelse
  } bind forall = flush cleartomark
restore
"
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter.Transverse
*PageRegion Letter.Transverse: "Letter"
*PageRegion Ledger: "ledger"
*PageRegion A4.Transverse: "A4"
*PageRegion A5.Transverse: "A5"
*PageRegion ISOB5.Transverse: "B5"
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4"
*PageRegion A5: "a5"
*PageRegion ISOB5: "b5"
*CloseUI: *PageRegion

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter.Transverse
*ImageableArea Letter.Transverse: "0 1 612 792 "
*ImageableArea Ledger: "1 0 1224 792 "
*ImageableArea A4.Transverse: "0 1 595 841 "
*ImageableArea A5.Transverse: "0 1 419 595 "
*ImageableArea ISOB5.Transverse: "0 1 498 709 "
*ImageableArea Letter: "1 0 612 792 "
*ImageableArea Legal: "0 1 612 1008 "
*ImageableArea Tabloid: "0 1 792 1224 "
*ImageableArea A3: "0 1 842 1191 "
*ImageableArea A4: "1 0 596 840 "
*ImageableArea A5: "1 0 420 595 "
*ImageableArea ISOB5: "1 0 498 709 "
*?ImageableArea: "
save
  /cvp {(                ) cvs print ( ) print } bind def
  /upperright {10000 mul floor 10000 div} bind def
  /lowerleft {10000 mul ceiling 10000 div} bind def
  newpath clippath pathbbox
  4 -2 roll exch 2 {lowerleft cvp} repeat
  exch 2 {upperright cvp} repeat flush
 restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter.Transverse
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Ledger: "1224 792"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5.Transverse: "420 595"
*PaperDimension ISOB5.Transverse: "499 709"
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "596 840"
*PaperDimension A5: "420 595"
*PaperDimension ISOB5: "499 709"

*%=== Custom Page Sizes ==================================

*% These entries provide the code and parameter ranges for a user
*% to set up a custom page size.
*CustomPageSize True: "exch pop statusdict /setpageparams get exec"
*ParamCustomPageSize Width: 1 points 0 1295
*ParamCustomPageSize Height: 2 points 0 2000
*ParamCustomPageSize WidthOffset/Margins: 3 points 0 1295
*ParamCustomPageSize HeightOffset: 4 points 0 0
*ParamCustomPageSize Orientation: 5 int 0 1
*CenterRegistered: False
*MaxMediaWidth: "1295"

*% Default Paper Handling Features
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Cassette
*InputSlot Cassette: ""
*CloseUI: *InputSlot

*DefaultOutputOrder: Normal

*% === Imagesetter Information ===========================
*OpenGroup: Imagesetter
*OpenUI *MirrorPrint/Mirror: Boolean
*OrderDependency: 50 AnySetup *MirrorPrint
*DefaultMirrorPrint: False
*MirrorPrint True: "statusdict /mirrorprint true put"
*MirrorPrint False: "statusdict /mirrorprint false put"
*?MirrorPrint: "save statusdict /mirrorprint get
        {(True)}{(False)}ifelse = flush restore"
*End
*CloseUI: *MirrorPrint

*OpenUI *NegativePrint/Negative: Boolean
*OrderDependency: 50 AnySetup *NegativePrint
*DefaultNegativePrint: False
*NegativePrint True: "statusdict /negativeprint true put"
*NegativePrint False: "statusdict /negativeprint false put"
*?NegativePrint: "save statusdict /negativeprint get
        {(True)}{(False)}ifelse = flush restore"
*End
*CloseUI: *NegativePrint

*CloseGroup: Imagesetter

*% Font Information =====================
*DefaultFont: Courier
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.004)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.004)" Standard ROM
*Font Courier-Oblique: Standard "(001.004)" Standard ROM
*Font Helvetica: Standard "(001.002)" Standard ROM
*Font Helvetica-Bold: Standard "(001.002)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.002)" Standard ROM
*Font Symbol: Special "(001.003)" Special ROM
*Font Times-Bold: Standard "(001.002)" Standard ROM
*Font Times-BoldItalic: Standard "(001.004)" Standard ROM
*Font Times-Italic: Standard "(001.002)" Standard ROM
*Font Times-Roman: Standard "(001.002)" Standard ROM
*?FontQuery: "
save
 /str 100 string dup 0 (fonts/) putinterval def
 {
   count 1 gt
   {
     exch dup str 6 94 getinterval cvs
     (/) print dup print (:) print exch
     FontDirectory exch known
     { pop (Yes) }
      {
        length 6 add str 0 3 -1 roll getinterval
        mark exch status
       {cleartomark (Yes)}{cleartomark (No)} ifelse
     } ifelse =
   }
   {exit} ifelse
 }bind loop
 (*) = flush
restore
"
*End

*?FontList: "
save
  FontDirectory { pop == } bind forall flush
  /filenameforall where
  {
    pop (fonts/*)
    { dup length 6 sub 6 exch getinterval cvn == } bind
    128 string filenameforall flush
  } if
  (*) = flush
restore
"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: recorder idle"
*Status: "PrinterError: end of job"
*Status: "PrinterError: recorder busy"
*Status: "PrinterError: recorder offline or film problem"
*Status: "PrinterError: recorder not responding"
*Status: "PrinterError: defaults wrong; using nulldevice"
*Status: "PrinterError: knife not in end position"
*Status: "PrinterError: cassette error"
*Status: "PrinterError: change cassette"
*Status: "PrinterError: knife error"
*Status: "PrinterError: no cassette"
*Status: "PrinterError: end of film"

*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"

*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "recorder idle"
*PrinterError: "end of job"
*PrinterError: "recorder busy"
*PrinterError: "recorder offline or film problem"
*PrinterError: "recorder not responding"
*PrinterError: "defaults wrong; using nulldevice"
*PrinterError: "knife not in end position"
*PrinterError: "cassette error"
*PrinterError: "change cassette"
*PrinterError: "knife error"
*PrinterError: "no cassette"
*PrinterError: "end of film"

*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"

*% Color Separation Information =====================

*DefaultColorSep: ProcessBlack.128lpi.1270dpi/128 lpi / 1270 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*% For 90 lpi / 635 dpi (5,5,2,6,6,2,20/3,0) ===============================

*ColorSepScreenAngle ProcessBlack.90lpi.635dpi/90 lpi / 635 dpi: "45.0"
*ColorSepScreenAngle CustomColor.90lpi.635dpi/90 lpi / 635 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.90lpi.635dpi/90 lpi / 635 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.90lpi.635dpi/90 lpi / 635 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.90lpi.635dpi/90 lpi / 635 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.90lpi.635dpi/90 lpi / 635 dpi: "89.8026"
*ColorSepScreenFreq CustomColor.90lpi.635dpi/90 lpi / 635 dpi: "89.8026"
*ColorSepScreenFreq ProcessCyan.90lpi.635dpi/90 lpi / 635 dpi: "100.402"
*ColorSepScreenFreq ProcessMagenta.90lpi.635dpi/90 lpi / 635 dpi: "100.402"
*ColorSepScreenFreq ProcessYellow.90lpi.635dpi/90 lpi / 635 dpi: "31.75"

*ColorSepScreenProc ProcessYellow.90lpi.635dpi/90 lpi / 635 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }"
*End

*% For 75 lpi / 635 dpi =====================================================

*ColorSepScreenAngle ProcessBlack.75lpi.635dpi/75 lpi / 635 dpi: "45.0"
*ColorSepScreenAngle CustomColor.75lpi.635dpi/75 lpi / 635 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.75lpi.635dpi/75 lpi / 635 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.75lpi.635dpi/75 lpi / 635 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.75lpi.635dpi/75 lpi / 635 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.75lpi.635dpi/75 lpi / 635 dpi: "74.8355"
*ColorSepScreenFreq CustomColor.75lpi.635dpi/75 lpi / 635 dpi: "74.8355"
*ColorSepScreenFreq ProcessCyan.75lpi.635dpi/75 lpi / 635 dpi: "66.9349"
*ColorSepScreenFreq ProcessMagenta.75lpi.635dpi/75 lpi / 635 dpi: "66.9349"
*ColorSepScreenFreq ProcessYellow.75lpi.635dpi/75 lpi / 635 dpi: "70.5556"

*% For 128 lpi / 1270 dpi (7,7,4,11,11,4,11,0) ===============================

*ColorSepScreenAngle ProcessBlack.128lpi.1270dpi/128 lpi / 1270 dpi: "45.0"
*ColorSepScreenAngle CustomColor.128lpi.1270dpi/128 lpi / 1270 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.128lpi.1270dpi/128 lpi / 1270 dpi: "70.0169"
*ColorSepScreenAngle ProcessMagenta.128lpi.1270dpi/128 lpi / 1270 dpi: "19.9831"
*ColorSepScreenAngle ProcessYellow.128lpi.1270dpi/128 lpi / 1270 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.128lpi.1270dpi/128 lpi / 1270 dpi: "128.289"
*ColorSepScreenFreq CustomColor.128lpi.1270dpi/128 lpi / 1270 dpi: "128.289"
*ColorSepScreenFreq ProcessCyan.128lpi.1270dpi/128 lpi / 1270 dpi: "108.503"
*ColorSepScreenFreq ProcessMagenta.128lpi.1270dpi/128 lpi / 1270 dpi: "108.503"
*ColorSepScreenFreq ProcessYellow.128lpi.1270dpi/128 lpi / 1270 dpi: "115.455"

*% For 112 lpi / 1270 dpi ===================================================

*ColorSepScreenAngle ProcessBlack.112lpi.1270dpi/112 lpi / 1270 dpi: "45.0"
*ColorSepScreenAngle CustomColor.112lpi.1270dpi/112 lpi / 1270 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.112lpi.1270dpi/112 lpi / 1270 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.112lpi.1270dpi/112 lpi / 1270 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.112lpi.1270dpi/112 lpi / 1270 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.112lpi.1270dpi/112 lpi / 1270 dpi: "112.253"
*ColorSepScreenFreq CustomColor.112lpi.1270dpi/112 lpi / 1270 dpi: "112.253"
*ColorSepScreenFreq ProcessCyan.112lpi.1270dpi/112 lpi / 1270 dpi: "100.402"
*ColorSepScreenFreq ProcessMagenta.112lpi.1270dpi/112 lpi / 1270 dpi: "100.402"
*ColorSepScreenFreq ProcessYellow.112lpi.1270dpi/112 lpi / 1270 dpi: "105.833"

*% For 90 lpi / 1270 dpi (10,10,4,12,12,4,40/3,0) ===========================

*ColorSepScreenAngle ProcessBlack.90lpi.1270dpi/90 lpi / 1270 dpi: "45.0"
*ColorSepScreenAngle CustomColor.90lpi.1270dpi/90 lpi / 1270 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.90lpi.1270dpi/90 lpi / 1270 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.90lpi.1270dpi/90 lpi / 1270 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.90lpi.1270dpi/90 lpi / 1270 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.90lpi.1270dpi/90 lpi / 1270 dpi: "89.8026"
*ColorSepScreenFreq CustomColor.90lpi.1270dpi/90 lpi / 1270 dpi: "89.8026"
*ColorSepScreenFreq ProcessCyan.90lpi.1270dpi/90 lpi / 1270 dpi: "100.402"
*ColorSepScreenFreq ProcessMagenta.90lpi.1270dpi/90 lpi / 1270 dpi: "100.402"
*ColorSepScreenFreq ProcessYellow.90lpi.1270dpi/90 lpi / 1270 dpi: "31.75"

*ColorSepScreenProc ProcessYellow.90lpi.1270dpi/90 lpi / 1270 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }"
*End

*% For 120 lpi / 1693 dpi (10,10,4,12,12,4,40/3,0) ===========================

*ColorSepScreenAngle ProcessBlack.120lpi.1693dpi/120 lpi / 1693 dpi: "45.0"
*ColorSepScreenAngle CustomColor.120lpi.1693dpi/120 lpi / 1693 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.120lpi.1693dpi/120 lpi / 1693 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.120lpi.1693dpi/120 lpi / 1693 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.120lpi.1693dpi/120 lpi / 1693 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.120lpi.1693dpi/120 lpi / 1693 dpi: "119.713"
*ColorSepScreenFreq CustomColor.120lpi.1693dpi/120 lpi / 1693 dpi: "119.713"
*ColorSepScreenFreq ProcessCyan.120lpi.1693dpi/120 lpi / 1693 dpi: "133.843"
*ColorSepScreenFreq ProcessMagenta.120lpi.1693dpi/120 lpi / 1693 dpi: "133.843"
*ColorSepScreenFreq ProcessYellow.120lpi.1693dpi/120 lpi / 1693 dpi: "42.325"

*ColorSepScreenProc ProcessYellow.120lpi.1693dpi/120 lpi / 1693 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }"
*End

*% For 100 lpi / 1693 dpi ====================================================

*ColorSepScreenAngle ProcessBlack.100lpi.1693dpi/100 lpi / 1693 dpi: "45.0"
*ColorSepScreenAngle CustomColor.100lpi.1693dpi/100 lpi / 1693 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.100lpi.1693dpi/100 lpi / 1693 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.100lpi.1693dpi/100 lpi / 1693 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.100lpi.1693dpi/100 lpi / 1693 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.100lpi.1693dpi/100 lpi / 1693 dpi: "99.761"
*ColorSepScreenFreq CustomColor.100lpi.1693dpi/100 lpi / 1693 dpi: "99.761"
*ColorSepScreenFreq ProcessCyan.100lpi.1693dpi/100 lpi / 1693 dpi: "89.2289"
*ColorSepScreenFreq ProcessMagenta.100lpi.1693dpi/100 lpi / 1693 dpi: "89.2289"
*ColorSepScreenFreq ProcessYellow.100lpi.1693dpi/100 lpi / 1693 dpi: "94.0556"

*% For 80 lpi / 1693 dpi (15,15,6,18,18,6,20,0) ==============================

*ColorSepScreenAngle ProcessBlack.80lpi.1693dpi/80 lpi / 1693 dpi: "45.0"
*ColorSepScreenAngle CustomColor.80lpi.1693dpi/80 lpi / 1693 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.80lpi.1693dpi/80 lpi / 1693 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.80lpi.1693dpi/80 lpi / 1693 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.80lpi.1693dpi/80 lpi / 1693 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.80lpi.1693dpi/80 lpi / 1693 dpi: "79.8088"
*ColorSepScreenFreq CustomColor.80lpi.1693dpi/80 lpi / 1693 dpi: "79.8088"
*ColorSepScreenFreq ProcessCyan.80lpi.1693dpi/80 lpi / 1693 dpi: "89.2289"
*ColorSepScreenFreq ProcessMagenta.80lpi.1693dpi/80 lpi / 1693 dpi: "89.2289"
*ColorSepScreenFreq ProcessYellow.80lpi.1693dpi/80 lpi / 1693 dpi: "84.65"

*% For "Linotype" version 49.3
*% Produced by "GETapd.ps" version 3.0 edit 54
*% Converted to meet 4.0 specification
*% Last Edit Date: Jun 18 1993
*% The byte count of this file should be exactly 020223 or 020787
*% depending on the filesystem it resides in.
*% end of PPD file for Linotype