Leaked source code of windows server 2003
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
|
|
*PPD-Adobe: "4.0"*% Adobe Systems PostScript(R) Printer Description File*% Copyright 1987-1993 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as*% long as this copyright notice is intact and the contents*% of the file is not altered in any way from its original form.*% End of Copyright statement*%Copyright 1993 Digital Equipment Corporation.*FormatVersion: "4.0"*FileVersion: "1.0"*PCFileName: "DCLPS321.PPD"*LanguageVersion: English*Product: "(PrintServer 32)"*PSVersion: "(48.3) 46"*ModelName: "Digital PrintServer 32"*NickName: "Digital PrintServer 32 v48.3"
*% === Options and Constraints ===============*OpenGroup: InstallableOptions/Options Installed*OpenUI *Option1/Optional Duplex Unit: Boolean*DefaultOption1: False*Option1 True/Installed: ""*Option1 False/Not Installed: ""*CloseUI: *Option1*OpenUI *Option2/Optional Mailbox-Sorter: Boolean*DefaultOption2: False*Option2 True/Installed: ""*Option2 False/Not Installed: ""*CloseUI: *Option2*CloseGroup: InstallableOptions/Options Installed
*UIConstraints: *OutputBin Side *Jog*UIConstraints: *Jog *OutputBin Side*UIConstraints: *OutputBin Side *Duplex*UIConstraints: *Duplex *OutputBin Side*UIConstraints: *Option1 False *Duplex*UIConstraints: *Option2 False *OutputBin Mail01*UIConstraints: *Option2 False *OutputBin Mail02*UIConstraints: *Option2 False *OutputBin Mail03*UIConstraints: *Option2 False *OutputBin Mail04*UIConstraints: *Option2 False *OutputBin Mail05*UIConstraints: *Option2 False *OutputBin Mail06*UIConstraints: *Option2 False *OutputBin Mail07*UIConstraints: *Option2 False *OutputBin Mail08*UIConstraints: *Option2 False *OutputBin Mail09*UIConstraints: *Option2 False *OutputBin Mail10*UIConstraints: *Option2 False *OutputBin Mail11*UIConstraints: *Option2 False *OutputBin Mail12*UIConstraints: *Option2 False *OutputBin Mail13*UIConstraints: *Option2 False *OutputBin Mail14*UIConstraints: *Option2 False *OutputBin Mail15*UIConstraints: *Option2 False *OutputBin Mail16*UIConstraints: *Option2 False *OutputBin Mail17*UIConstraints: *Option2 False *OutputBin Mail18*UIConstraints: *Option2 False *OutputBin Mail19*UIConstraints: *Option2 False *OutputBin Mail20
*% === Basic Capabilities ===============*FreeVM: "896235"*LanguageLevel: "1"*Extensions: CMYK *ColorDevice: False*DefaultColorSpace: Gray*VariablePaperSize: False*FileSystem: False*Throughput: "32"
*% For MS Windows: Do not put ^D in files*EndOfFile: False
*Password: "(LPS)"*ExitServer: " count 0 eq { true }{ dup statusdict /checkpassword get exec not } ifelse { (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec"*End
*DefaultResolution: 300dpi*?Resolution: " save initgraphics matrix defaultmatrix dup 0 get dup mul exch 1 get dup mul add sqrt 72 mul round cvi ( ) cvs print (dpi) = flush restore"*End
*% === DECimage (Smoothing) ============*OpenUI *Smoothing/DECimage: Boolean*OrderDependency: 50 AnySetup *Smoothing*DefaultSmoothing: Off*Smoothing Off: "false statusdict /setDECimage get exec"*Smoothing On: "true statusdict /setDECimage get exec"*?Smoothing: " save statusdict /DECimage get exec {(On)}{(Off)} ifelse = flush restore"*End*CloseUI: *Smoothing
*% === DECimageparams (bits per pixel) ============*OpenUI *BitsPerPixel/DECimage controls: PickOne*OrderDependency: 50 AnySetup *BitsPerPixel*DefaultBitsPerPixel: Off*BitsPerPixel Off/Standard: "0.0 1.0 0.0 1 statusdict /setDECimageparams get exec"*BitsPerPixel 1/High Contrast: "0.2 0.8 0.0 1 statusdict /setDECimageparams get exec"*BitsPerPixel 2/Low Contrast: "-0.4 1.5 0.0 1 statusdict /setDECimageparams get exec"*BitsPerPixel 4/Sharp: "0.0 1.0 2.0 1 statusdict /setDECimageparams get exec"*BitsPerPixel 8/Soft: "0.0 1.0 -1.0 1 statusdict /setDECimageparams get exec"*CloseUI:BitsPerPixel
*% Halftone Information ===============*AccurateScreensSupport: False*ScreenFreq: "60.0"*ScreenAngle: "45.0"*DefaultScreenProc: Dot*ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub } {dup mul exch dup mul add 1 exch sub }ifelse }"*End*ScreenProc Line: "{ pop }"*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null*Transfer Null: "{ }"*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================*% Use these entries to set paper size most of the time, unless there is*% specific reason to use PageRegion.*OpenUI *PageSize: PickOne*OrderDependency: 30 AnySetup *PageSize*DefaultPageSize: Letter*PageSize Letter: "statusdict /lettertray get exec"*PageSize Legal: "statusdict /legaltray get exec"*PageSize Tabloid: "statusdict /11x17tray get exec"*PageSize Executive: "statusdict /executivetray get exec"*PageSize A3: "statusdict /a3tray get exec"*PageSize A4: "statusdict /a4tray get exec"*PageSize A5: "statusdict /a5tray get exec"*PageSize B4: "statusdict /b4tray get exec"*PageSize B5: "statusdict /b5tray get exec"*?PageSize: " save 9 dict dup /lettertray (Letter) put dup /legaltray (Legal) put dup /11x17tray (Tabloid) put dup /executivetray (Executive) put dup /a3tray (A3) put dup /a4tray (A4) put dup /a5tray (A5) put dup /b4tray (B4) put dup /b5tray (B5) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore"*End*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.*OpenUI *PageRegion: PickOne*OrderDependency: 40 AnySetup *PageRegion*DefaultPageRegion: Letter*PageRegion Letter: ""*PageRegion Legal: ""*PageRegion Tabloid: ""*PageRegion Executive: ""*PageRegion A3: ""*PageRegion A4: ""*PageRegion A5: ""*PageRegion B4: ""*PageRegion B5: ""*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.*DefaultImageableArea: Letter*ImageableArea Letter: "6.48 8.16 605.28 783.6 "*ImageableArea Legal: "6.48 8.88 605.28 999.36 "*ImageableArea Tabloid: "8.16 9.36 783.6 1214.88 "*ImageableArea Executive: "9.36 8.16 508.32 745.2 "*ImageableArea A3: "5.76 6.36 834.96 1181.16 "*ImageableArea A4: "5.76 6.36 589.2 832.32 "*ImageableArea A5: "6.24 6.0 413.04 589.44 "*ImageableArea B4: "7.08 9.24 721.08 1022.76 "*ImageableArea B5: "8.28 7.32 507.24 721.08 "*?ImageableArea: " save /cvp { ( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore"*End
*% These provide the physical dimensions of the paper (by keyword)*DefaultPaperDimension: Letter*PaperDimension Letter: "612 792"*PaperDimension Legal: "612 1008"*PaperDimension Tabloid: "792 1224"*PaperDimension Executive: "522 756"*PaperDimension A3: "842 1191"*PaperDimension A4: "595 842"*PaperDimension A5: "419 595"*PaperDimension B4: "729 1032"*PaperDimension B5: "516 729"
*OpenUI *InputSlot: PickOne*OrderDependency: 20 AnySetup *InputSlot*DefaultInputSlot: LargeCapacity*InputSlot Upper: "1 statusdict /setpapertray get exec"*InputSlot Middle: "2 statusdict /setpapertray get exec"*InputSlot LargeCapacity: "3 statusdict /setpapertray get exec"*?InputSlot: " save [ (Upper) (Middle) (LargeCapacity) ] statusdict /papertray {get exec} stopped { pop pop (Unknown) } if = flush restore"*End*CloseUI: *InputSlot
*OpenUI *OutputBin: PickOne*OrderDependency: 40 AnySetup *OutputBin*DefaultOutputBin: Upper*OutputBin Lower: "1 statusdict /setoutputtray get exec"*OutputBin Side: "2 statusdict /setoutputtray get exec"*OutputBin Upper: "3 statusdict /setoutputtray get exec"*OutputBin Mail01: "4 statusdict /setoutputtray get exec"*OutputBin Mail02: "5 statusdict /setoutputtray get exec"*OutputBin Mail03: "6 statusdict /setoutputtray get exec"*OutputBin Mail04: "7 statusdict /setoutputtray get exec"*OutputBin Mail05: "8 statusdict /setoutputtray get exec"*OutputBin Mail06: "9 statusdict /setoutputtray get exec"*OutputBin Mail07: "10 statusdict /setoutputtray get exec"*OutputBin Mail08: "11 statusdict /setoutputtray get exec"*OutputBin Mail09: "12 statusdict /setoutputtray get exec"*OutputBin Mail10: "13 statusdict /setoutputtray get exec"*OutputBin Mail11: "14 statusdict /setoutputtray get exec"*OutputBin Mail12: "15 statusdict /setoutputtray get exec"*OutputBin Mail13: "16 statusdict /setoutputtray get exec"*OutputBin Mail14: "17 statusdict /setoutputtray get exec"*OutputBin Mail15: "18 statusdict /setoutputtray get exec"*OutputBin Mail16: "19 statusdict /setoutputtray get exec"*OutputBin Mail17: "20 statusdict /setoutputtray get exec"*OutputBin Mail18: "21 statusdict /setoutputtray get exec"*OutputBin Mail19: "22 statusdict /setoutputtray get exec"*OutputBin Mail20: "23 statusdict /setoutputtray get exec"*?OutputBin: " save mark [ (Lower) (Side) (Upper) (Mail01) (Mail02) (Mail03) (Mail04) (Mail05) (Mail06) (Mail07) (Mail08) (Mail09) (Mail10) (Mail11) (Mail12) (Mail13) (Mail14) (Mail15) (Mail16) (Mail17) (Mail18) (Mail19) (Mail20)] statusdict /outputtray {get exec 1 sub get exch pop} stopped { cleartomark (Unknown) } if = flush restore"*End*CloseUI: *OutputBin
*PageStackOrder Lower: Normal*PageStackOrder Side: Reverse*PageStackOrder Upper: Normal
*OpenUI *Duplex: PickOne*OrderDependency: 50 AnySetup *Duplex*DefaultDuplex: None*Duplex None: " statusdict /duplexmode known { false statusdict /setduplexmode get exec false statusdict /settumble get exec } if"*End*Duplex DuplexNoTumble: "true statusdict /setduplexmode get exec false statusdict /settumble get exec"*Duplex DuplexTumble: "true statusdict /setduplexmode get exec true statusdict /settumble get exec"*?Duplex: " save statusdict /duplexmode get exec {statusdict /tumble get exec {(DuplexTumble)}{(DuplexNoTumble)}ifelse} {(None)} ifelse = flush restore"*End*CloseUI: *Duplex
*OpenUI *Jog: Boolean*OrderDependency: 50 AnySetup *Jog*DefaultJog: False*Jog True: "1 statusdict /setoutputposition get exec"*Jog False: "0 statusdict /setoutputposition get exec"*?Jog: "statusdict /outputposition get exec 1 eq {(True)}{(False)} ifelse = flush"*CloseUI: *Jog
*% Font Information =====================*DefaultFont: Error*Font AvantGarde-Book: Standard "(001.001)" Standard*Font AvantGarde-BookOblique: Standard "(001.001)" Standard*Font AvantGarde-Demi: Standard "(001.001)" Standard*Font AvantGarde-DemiOblique: Standard "(001.001)" Standard*Font Courier: Standard "(001.004)" Standard*Font Courier-Bold: Standard "(001.004)" Standard*Font Courier-BoldOblique: Standard "(001.004)" Standard*Font Courier-Oblique: Standard "(001.004)" Standard*Font Helvetica: Standard "(001.001)" Standard*Font Helvetica-Bold: Standard "(001.001)" Standard*Font Helvetica-BoldOblique: Standard "(001.001)" Standard*Font Helvetica-Oblique: Standard "(001.001)" Standard*Font LubalinGraph-Book: Standard "(001.001)" Standard*Font LubalinGraph-BookOblique: Standard "(001.001)" Standard*Font LubalinGraph-Demi: Standard "(001.001)" Standard*Font LubalinGraph-DemiOblique: Standard "(001.001)" Standard*Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard*Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard*Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard*Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard*Font Souvenir-Demi: Standard "(001.001)" Standard*Font Souvenir-DemiItalic: Standard "(001.001)" Standard*Font Souvenir-Light: Standard "(001.001)" Standard*Font Souvenir-LightItalic: Standard "(001.001)" Standard*Font Symbol: Special "(001.001)" Special*Font Times-Bold: Standard "(001.001)" Standard*Font Times-BoldItalic: Standard "(001.001)" Standard*Font Times-Italic: Standard "(001.001)" Standard*Font Times-Roman: Standard "(001.001)" Standard
*?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = } {exit} ifelse }bind loop (*) = flush restore"*End
*?FontList: "save FontDirectory { pop == } bind forall flush (*) = flush restore"
*% Printer Messages (verbatim from printer):*Message: "A new input or output tray has been selected"*Message: "Document has been printed"*Message: "Job \jobname\ Aborted by Server Management"*Message: "Job \jobname\ Aborted"*Message: "Job \jobname\ Connect"*Message: "Job \jobname\ Finish"*Message: "Job \jobname\ Start"*Message: "Job aborted - Printer is still paused"*Message: "Job acceptance is disabled - job rejected"*Message: "Lower output tray full, switching to upper"*Message: "Output being delivered to lower tray"*Message: "Output being delivered to upper tray"*Message: "Pending Job \jobname\ Aborted"*Message: "PostScript quit operator has been executed"*Message: "Print Engine error has been corrected"*Message: "Print Engine has gone online"*Message: "Print Engine ready"*Message: "Problem Unknown"*Message: "String is too long - it has been truncated"*Message: "Switching to alternate paper source"*Message: "Timeout trying to send a message"*Message: "Upper output tray full, switching to lower"*Message: "exitserver has been executed - permanent state may be changed"
*% PrinterErrors*PrinterError: "Add toner and Clean components"*PrinterError: "Call Field Service to correct error"*PrinterError: "Charge wire cleaning completed"*PrinterError: "Charge wire cleaning in progress"*PrinterError: "Check: toner cartridge installation"*PrinterError: "Cleaning unit absent or improperly seated"*PrinterError: "Cleaning unit full - needs replacement"*PrinterError: "Communication with print engine lost -- reboot PrintServer"*PrinterError: "Developer unit absent or improperly seated"*PrinterError: "Duplex user maintenance, perform: duplex maintenance"*PrinterError: "Duplexer cover is open"*PrinterError: "Duplexer paper path is not properly seated"*PrinterError: "Duplexer unit error"*PrinterError: "Duplexer unit is jammed"*PrinterError: "Engine command buffer overflow -- reboot PrintServer"*PrinterError: "Field Service maintenance required- Call Field Service"*PrinterError: "Fuser unit absent or improperly seated"*PrinterError: "General user maintenance, perform: \maintenance\"*PrinterError: "Image density adjustment required"*PrinterError: "Incorrect media in LCIT"*PrinterError: "Incorrect media in lower paper tray"*PrinterError: "Incorrect media in upper paper tray"*PrinterError: "Lower output tray full"*PrinterError: "Lower paper tray is missing or misaligned"*PrinterError: "Media incompatible with duplexer or output device"*PrinterError: "OPC drum absent or improperly seated"*PrinterError: "OPC drum needs replacement"*PrinterError: "Output tray missing or cover open"*PrinterError: "Paper Jam - Clear top output tray"*PrinterError: "Paper Jam - Open side door to clear paper path"*PrinterError: "Paper Jam - Optional output device"*PrinterError: "Paper feed slot access paper jam, clear cassette area"*PrinterError: "Paper output cover is open"*PrinterError: "Perform user maintenance"*PrinterError: "Please clear paper jam caused by DPX feed path"*PrinterError: "Please clear paper jam caused by DPX transport station"*PrinterError: "Please clear paper jam caused by fatal engine error"*PrinterError: "Please clear paper jam caused by fusing unit"*PrinterError: "Please clear paper jam caused by lower transport station"*PrinterError: "Please clear paper jam caused by main transport station"*PrinterError: "Please clear paper jam caused by opened cover"*PrinterError: "Please clear paper jam caused by optional output device"*PrinterError: "Please clear paper jam caused by optional device paper output"*PrinterError: "Please clear paper jam caused by optional device transport station"*PrinterError: "Please clear paper jam caused by upper transport station"*PrinterError: "Please reboot the PrintServer - FATAL ERROR"*PrinterError: "Print Engine 100,000 page maintenance required"*PrinterError: "Print Engine 200,000 page maintenance required"*PrinterError: "Print Engine 50,000 page maintenance required"*PrinterError: "Print Engine cover is open"*PrinterError: "Print Engine developer needs replacement"*PrinterError: "Print Engine driving unit error"*PrinterError: "Print Engine drum needs replacement"*PrinterError: "Print Engine fusing error"*PrinterError: "Print Engine fusing unit setting is incorrect"*PrinterError: "Print Engine hardware error: \code\"*PrinterError: "Print Engine has gone off line"*PrinterError: "Print Engine is in warmup state"*PrinterError: "Print Engine is not ready"*PrinterError: "Print Engine large capacity paper tray is empty"*PrinterError: "Print Engine large capacity paper tray is jammed"*PrinterError: "Print Engine lower paper tray is empty"*PrinterError: "Print Engine lower paper tray is jammed"*PrinterError: "Print Engine oil supply low"*PrinterError: "Print Engine optical unit error"*PrinterError: "Print Engine paper eject section is jammed"*PrinterError: "Print Engine paper feed unit error"*PrinterError: "Print Engine power supply unit error"*PrinterError: "Print Engine toner cartridge setting is incorrect"*PrinterError: "Print Engine toner supply is exhausted"*PrinterError: "Print Engine toner supply low"*PrinterError: "Print Engine transport path setting is incorrect"*PrinterError: "Print Engine transport section is jammed"*PrinterError: "Print Engine unknown error status: \code1\, \code2\"*PrinterError: "Print Engine upper paper tray is empty"*PrinterError: "Print Engine upper paper tray is jammed"*PrinterError: "Print engine side cover is open"*PrinterError: "Printer requires service: code = \service1\ \service2\"*PrinterError: "Replace OPC drum"*PrinterError: "Side output tray full"*PrinterError: "Side tray not correctly positioned"*PrinterError: "Toner low or not distibuted properly replace: toner"*PrinterError: "Unavailable paper destination selected"*PrinterError: "Upper and lower output trays full"*PrinterError: "Upper door access paper jam, open top cover"*PrinterError: "Upper output tray full"*PrinterError: "Upper paper tray is missing or misaligned"*PrinterError: "Upper unit cover open, close top cover"
*% Status Messages: copy of PrinterErrors*Status: "Add toner and Clean components"*Status: "Call Field Service to correct error"*Status: "Charge wire cleaning completed"*Status: "Charge wire cleaning in progress"*Status: "Check: toner cartridge installation"*Status: "Cleaning unit absent or improperly seated"*Status: "Cleaning unit full - needs replacement"*Status: "Communication with print engine lost -- reboot PrintServer"*Status: "Developer unit absent or improperly seated"*Status: "Duplex user maintenance, perform: duplex maintenance"*Status: "Duplexer cover is open"*Status: "Duplexer paper path is not properly seated"*Status: "Duplexer unit error"*Status: "Duplexer unit is jammed"*Status: "Engine command buffer overflow -- reboot PrintServer"*Status: "Field Service maintenance required- Call Field Service"*Status: "Fuser unit absent or improperly seated"*Status: "General user maintenance, perform: \maintenance\"*Status: "Image density adjustment required"*Status: "Incorrect media in LCIT"*Status: "Incorrect media in lower paper tray"*Status: "Incorrect media in upper paper tray"*Status: "Lower output tray full"*Status: "Lower paper tray is missing or misaligned"*Status: "Media incompatible with duplexer or output device"*Status: "OPC drum absent or improperly seated"*Status: "OPC drum needs replacement"*Status: "Output tray missing or cover open"*Status: "Paper Jam - Clear top output tray"*Status: "Paper Jam - Open side door to clear paper path"*Status: "Paper Jam - Optional output device"*Status: "Paper feed slot access paper jam, clear cassette area"*Status: "Paper output cover is open"*Status: "Perform user maintenance"*Status: "Please clear paper jam caused by DPX feed path"*Status: "Please clear paper jam caused by DPX transport station"*Status: "Please clear paper jam caused by fatal engine error"*Status: "Please clear paper jam caused by fusing unit"*Status: "Please clear paper jam caused by lower transport station"*Status: "Please clear paper jam caused by main transport station"*Status: "Please clear paper jam caused by opened cover"*Status: "Please clear paper jam caused by optional output device"*Status: "Please clear paper jam caused by optional device paper output"*Status: "Please clear paper jam caused by optional device transport station"*Status: "Please clear paper jam caused by upper transport station"*Status: "Please reboot the PrintServer - FATAL ERROR"*Status: "Print Engine 100,000 page maintenance required"*Status: "Print Engine 200,000 page maintenance required"*Status: "Print Engine 50,000 page maintenance required"*Status: "Print Engine cover is open"*Status: "Print Engine developer needs replacement"*Status: "Print Engine driving unit error"*Status: "Print Engine drum needs replacement"*Status: "Print Engine fusing error"*Status: "Print Engine fusing unit setting is incorrect"*Status: "Print Engine hardware error: \code\"*Status: "Print Engine has gone off line"*Status: "Print Engine is in warmup state"*Status: "Print Engine is not ready"*Status: "Print Engine large capacity paper tray is empty"*Status: "Print Engine large capacity paper tray is jammed"*Status: "Print Engine lower paper tray is empty"*Status: "Print Engine lower paper tray is jammed"*Status: "Print Engine oil supply low"*Status: "Print Engine optical unit error"*Status: "Print Engine paper eject section is jammed"*Status: "Print Engine paper feed unit error"*Status: "Print Engine power supply unit error"*Status: "Print Engine toner cartridge setting is incorrect"*Status: "Print Engine toner supply is exhausted"*Status: "Print Engine toner supply low"*Status: "Print Engine transport path setting is incorrect"*Status: "Print Engine transport section is jammed"*Status: "Print Engine unknown error status: \code1\, \code2\"*Status: "Print Engine upper paper tray is empty"*Status: "Print Engine upper paper tray is jammed"*Status: "Print engine side cover is open"*Status: "Printer requires service: code = \service1\ \service2\"*Status: "Replace OPC drum"*Status: "Side output tray full"*Status: "Side tray not correctly positioned"*Status: "Toner low or not distibuted properly replace: toner"*Status: "Unavailable paper destination selected"*Status: "Upper and lower output trays full"*Status: "Upper door access paper jam, open top cover"*Status: "Upper output tray full"*Status: "Upper paper tray is missing or misaligned"*Status: "Upper unit cover open, close top cover"
*% Other status messages*Status: "Active"*Status: "Idle"*Status: "PrintServer is currently disabled and cannot accept jobs"*Status: "Printer is paused (job is pending)"*Status: "Printer is resuming"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black*InkName: CustomColor/Custom Color*InkName: ProcessCyan/Process Cyan*InkName: ProcessMagenta/Process Magenta*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi ===============================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "PrintServer 32" version 48.3 *% Produced by "bldppd4.0L1.ps"*% Last Edit Date: Jun 23 1993*% The byte count of this file should be exactly 025838 or 026456*% depending on the filesystem it resides in.*% end of PPD file for PrintServer 32
|
