|
|
/*++
Copyright (c) Microsoft Corporation. All rights reserved.
Module Name:
isnkrnl.h
Abstract:
This header file contains interface definitions for NT clients of the ISN IPX/SPX/Netbios stack.
Author:
Adam Barr (adamba) 10 November 1993
Revision History:
--*/
#include <packon.h>
//
// Defines a local target. The NicId is assigned by IPX
// for each adapter or WAN line it is bound to. The MacAddress
// is generally the address of the remote machine or the
// router that is used to get to the remote machine.
//
//
//
// [SanjayAn] Changed LocalTarget to include a NicHandle
//
#ifdef _PNP_POWER
typedef struct _NIC_HANDLE { USHORT NicId;
#ifdef _PNP_LATER
ULONG Version; CSHORT Signature;#endif _PNP_LATER
} NIC_HANDLE, *PNIC_HANDLE;
typedef struct _IPX_LOCAL_TARGET { union { USHORT NicId; NIC_HANDLE NicHandle; }; UCHAR MacAddress[6];} IPX_LOCAL_TARGET, *PIPX_LOCAL_TARGET;
#else
typedef USHORT NIC_HANDLE;typedef PUSHORT PNIC_HANDLE;
typedef struct _IPX_LOCAL_TARGET { USHORT NicId; UCHAR MacAddress[6];} IPX_LOCAL_TARGET, *PIPX_LOCAL_TARGET;
#endif _PNP_POWER
//
// Definition of the options on a TDI datagram. These
// can be passed in as the Options field of a send
// datagram. It is indicated as the Options on a receive
// datagram, and will be copied into the Options field
// of a posted receive datagram if there is room.
//
// The complete structure does not need to be passed.
// Only the packet type can be passed, or nothing.
//
typedef struct _IPX_DATAGRAM_OPTIONS { UCHAR PacketType; UCHAR Reserved; IPX_LOCAL_TARGET LocalTarget;} IPX_DATAGRAM_OPTIONS, *PIPX_DATAGRAM_OPTIONS;
//
// The extended address that some addresses want. If
// the proper ioctl is set (MIPX_SENDADDROPT) then
// this structure is passed as the remote address on
// send datagrams...
//
typedef struct _IPX_ADDRESS_EXTENDED { TA_IPX_ADDRESS IpxAddress; UCHAR PacketType;} IPX_ADDRESS_EXTENDED, *PIPX_ADDRESS_EXTENDED;
//
// ...and this structure is passed on receive indications.
// The values for Flags are defined right after it.
// By using the MIPX_SETRCVFLAGS ioctl you can also
// enable this format for receive addresses without
// changing what is passed on sends.
//
typedef struct _IPX_ADDRESS_EXTENDED_FLAGS { TA_IPX_ADDRESS IpxAddress; UCHAR PacketType; UCHAR Flags;} IPX_ADDRESS_EXTENDED_FLAGS, *PIPX_ADDRESS_EXTENDED_FLAGS;
//
// Just appends Nic to the above structure.
//
typedef struct _IPX_ADDRESS_EXTENDED_FLAGS2 { TA_IPX_ADDRESS IpxAddress; UCHAR PacketType; UCHAR Flags; ULONG Nic;} IPX_ADDRESS_EXTENDED_FLAGS2, *PIPX_ADDRESS_EXTENDED_FLAGS2;
#define IPX_EXTENDED_FLAG_BROADCAST 0x01 // the frame was sent as a broadcast
#define IPX_EXTENDED_FLAG_LOCAL 0x02 // the frame was sent from this machine
//
// The various states of the NICs (LAN/WAN)
//
#define NIC_CREATED 1
#define NIC_DELETED 2
#define NIC_CONNECTED 3
#define NIC_DISCONNECTED 4
#define NIC_LINE_DOWN 5
#define NIC_LINE_UP 6
#define NIC_CONFIGURED 7
//
// The mother of all hacks - tell the forwarder if it should shrink or
// expand all the NICIds...
//
#define NIC_OPCODE_DECREMENT_NICIDS 0x10
#define NIC_OPCODE_INCREMENT_NICIDS 0x20
//
// Move the isnipx.h definitions over here
//
// Frame types. For now these mirror those in isnipx.h.
//
#define MISN_FRAME_TYPE_ETHERNET_II 0
#define MISN_FRAME_TYPE_802_3 1
#define MISN_FRAME_TYPE_802_2 2
#define MISN_FRAME_TYPE_SNAP 3
#define MISN_FRAME_TYPE_ARCNET 4 // we ignore this
#define MISN_FRAME_TYPE_MAX 4 // of the four standard ones
#define ISN_FRAME_TYPE_AUTO 0xff
#include <packoff.h>
//***NIC Info ***
//
// For now, we assume that there will not be more than 256 bindings.
// This is a big enough number for most cases that we will encounter now
// or the foreseeable future. We allocate an array of ULONGS of the above
// dimension. This array stores in its first n elements pointers to the
// bindings created for the various LAN and WAN adapters.
//
#define IPX_MAXIMUM_BINDINGS 256
//
// This is the interface that the Router process in address space uses
// to open an address end point. Only one point can currently be opened.
// The ea buffer should have the end point information in exactly the same
// format as is used for TdiTransportAddress endpoint.
//
#define ROUTER_INTERFACE "RouterInterface"
#define ROUTER_INTERFACE_LENGTH (sizeof("RouterInterface") - 1)
//
// Max. no. of ports that the Router can open
//
#define IPX_RT_MAX_ADDRESSES 16
// Structure for MIPX_CONFIG Ioctl parameters
typedef struct _ISN_ACTION_GET_DETAILS { USHORT NicId; // passed by caller
BOOLEAN BindingSet; // returns TRUE if in set
UCHAR Type; // 1 = lan, 2 = up wan, 3 = down wan
ULONG FrameType; // returns 0 through 3
ULONG NetworkNumber; // returns virtual net if NicId is 0
UCHAR Node[6]; // adapter's MAC address.
WCHAR AdapterName[64]; // terminated with Unicode NULL
} ISN_ACTION_GET_DETAILS, *PISN_ACTION_GET_DETAILS;
//
// IPX_NIC_INFO. One or more such structures can be retrieved by a user
// app through the MIPX_GETNEWNICS ioctl.
//
typedef struct _IPX_NIC_INFO {
ULONG InterfaceIndex; // relevant only for demand dial WAN interfaces
UCHAR RemoteNodeAddress[6]; //remote nic address (only for WAN)
ULONG LinkSpeed; //speed of link
ULONG PacketType; //packet type 802.3 or whatever
ULONG MaxPacketSize; //Max. pkt size allowed on the link
ULONG NdisMediumType; //Medium type
ULONG NdisMediumSubtype; //
BOOLEAN Status; ULONG ConnectionId; // used to match TimeSinceLastActivity IOCtls
ULONG IpxwanConfigRequired; // 1 - IPXWAN Required
ISN_ACTION_GET_DETAILS Details; } IPX_NIC_INFO, *PIPX_NIC_INFO;
//
// structure to be passed in the input buffer for the MIPX_GETNEWNICS IOCTL
//
typedef struct _IPX_NICS { ULONG NoOfNics; ULONG TotalNoOfNics; ULONG fAllNicsDesired; //indicates that the client wants
//ipx to start afresh
UCHAR Data[1]; //memory holding an array of IPX_NIC_INFO
//structures starts here
} IPX_NICS, *PIPX_NICS;
//
// Enhanced OPTIONS structure for use with the MIPX_GETNEWNICS ioctl
//
typedef struct _IPX_DATAGRAM_OPTIONS2 { IPX_DATAGRAM_OPTIONS DgrmOptions; TDI_ADDRESS_IPX RemoteAddress; ULONG LengthOfExtraOpInfo; //set it to the size of the extra
//option info.
char Data[1]; //for future extensibility
} IPX_DATAGRAM_OPTIONS2, *PIPX_DATAGRAM_OPTIONS2;
//
// Invalid NicId passed down only once so IPX can map the ConnectionId
// to a NicId, which is used later.
//
#define INVALID_NICID 0xffffffff
//
// Structure to be passed with the MIPX_QUERY_WAN_INACTIVITY IOCTL
//
typedef struct _IPX_QUERY_WAN_INACTIVITY { ULONG ConnectionId; USHORT NicId; // if equals INVALID_NICID, AdapterIndex is filled in
// adapter index; should change to NicHandle [ZZ]
ULONG WanInactivityCounter; // filled in on return
} IPX_QUERY_WAN_INACTIVITY, *PIPX_QUERY_WAN_INACTIVITY;
//
// Structure to be passed with the MIPX_IPXWAN_CONFIG_DONE IOCTL
//
typedef struct _IPXWAN_CONFIG_DONE { USHORT NicId; // adapter index; should change to NicHandle [ZZ]
ULONG Network; UCHAR LocalNode[6]; UCHAR RemoteNode[6];} IPXWAN_CONFIG_DONE, *PIPXWAN_CONFIG_DONE;
//
// Definitions for TDI_ACTION calls supported by ISN.
// In general the structure defined is passed in the
// OutputBuffer (which becomes the MDL chain when
// the transport receives it) and is used for input
// and output as specified.
//
//
// This is the TransportId to use in the action header
// (it is the string "MISN").
//
#define ISN_ACTION_TRANSPORT_ID (('N' << 24) | ('S' << 16) | ('I' << 8) | ('M'))
//
// Get local target is used to force a re-RIP and also
// obtain the local target information if desired. The
// IpxAddress is passed on input and the LocalTarget
// is returned on output. The structure defined here
// goes in the Data section of an NWLINK_ACTION
// structure with the Option set to MIPX_LOCALTARGET.
//
typedef struct _ISN_ACTION_GET_LOCAL_TARGET { TDI_ADDRESS_IPX IpxAddress; IPX_LOCAL_TARGET LocalTarget;} ISN_ACTION_GET_LOCAL_TARGET, *PISN_ACTION_GET_LOCAL_TARGET;
//
// Get network information is used to return information
// about the path to a network. The information may not
// be accurate since it only reflects what IPX knows
// about the first hop to the remote. Network is an
// input and LinkSpeed (in bytes per second) and
// MaximumPacketSize (not including the IPX header)
// are returned. The structure defined here goes
// in the Data section of an NWLINK_ACTION structure
// with the Options set to MIPX_NETWORKINFO.
//
typedef struct _ISN_ACTION_GET_NETWORK_INFO { ULONG Network; ULONG LinkSpeed; ULONG MaximumPacketSize;} ISN_ACTION_GET_NETWORK_INFO, *PISN_ACTION_GET_NETWORK_INFO;
//
// This is the structure that the streams IPX transport used
// for its action requests. Because of the way in which nwlink
// was implemented, when passing this structure in a TDI_ACTION
// it should be specified as the InputBuffer, not the output
// buffer.
//
// In the action header, the TransportId is "MIPX" and the
// ActionCode is 0. DatagramOption is TRUE for IPX ioctls
// and FALSE for SPX. The BufferLength includes the length
// of everything after it, which is sizeof(ULONG) for Option
// plus whatever Data is present. Option is one of the
// ioctl codes defined after the structure; in most cases
// Data is not needed.
//
typedef struct _NWLINK_ACTION { TDI_ACTION_HEADER Header; UCHAR OptionType; ULONG BufferLength; ULONG Option; CHAR Data[1];} NWLINK_ACTION, *PNWLINK_ACTION;
//
// Defines the values for OptionType (note that for
// NWLINK this is a BOOLEAN DatagramOption, so we
// define these to match, adding the control channel
// one for ISN only).
//
#define NWLINK_OPTION_CONNECTION 0 // action is on a connection
#define NWLINK_OPTION_ADDRESS 1 // action is on an address
#define NWLINK_OPTION_CONTROL 2 // action is on the control channel,
// may also be submitted on an
// open connection or address object
//
// The following IOCTLs are taken from nwlink; the only
// ones added for ISN are the ones in the 200 range.
//
/** Ioctls for IPX - (X) = User callable **/
/**
ioctls will values 100 - 150 were added for the NT port.**/
#define I_MIPX (('I' << 24) | ('D' << 16) | ('P' << 8))
#define MIPX_SETNODEADDR (I_MIPX | 0) /* Set the node address */
#define MIPX_SETNETNUM (I_MIPX | 1) /* Set the network number */
#define MIPX_SETPTYPE (I_MIPX | 2) /* (X) Set the packet type */
#define MIPX_SENTTYPE (I_MIPX | 3) /* (X) Set the xport type */
#define MIPX_SETPKTSIZE (I_MIPX | 4) /* Set the packet size */
#define MIPX_SETSAP (I_MIPX | 5) /* Set the sap/type field */
#define MIPX_SENDOPTS (I_MIPX | 6) /* (X) Send options on recv */
#define MIPX_NOSENDOPTS (I_MIPX | 7) /* (X) Don't send options on recv */
#define MIPX_SENDSRC (I_MIPX | 8) /* (X) Send source address up */
#define MIPX_NOSENDSRC (I_MIPX | 9) /* (X) Don't Send source address up */
#define MIPX_CONVBCAST (I_MIPX | 10) /* Convert TKR bcast to func addr */
#define MIPX_NOCONVBCAST (I_MIPX | 11) /* Don't cnvrt TKR bcast to funcaddr */
#define MIPX_SETCARDTYPE (I_MIPX | 12) /* Set 802.3 or ETH type */
#define MIPX_STARGROUP (I_MIPX | 13) /* This is stargroup */
#define MIPX_SWAPLENGTH (I_MIPX | 14) /* Set flag for swapping 802.3 length */
#define MIPX_SENDDEST (I_MIPX | 15) /* (X) Send dest. address up */
#define MIPX_NOSENDDEST (I_MIPX | 16) /* (X) Don't send dest. address up */
#define MIPX_SENDFDEST (I_MIPX | 17) /* (X) Send final dest. address up */
#define MIPX_NOSENDFDEST (I_MIPX | 18) /* (X) Don't send final dest. up */
/** Added for NT port **/
#define MIPX_SETVERSION (I_MIPX | 100) /* Set card version */
#define MIPX_GETSTATUS (I_MIPX | 101)
#define MIPX_SENDADDROPT (I_MIPX | 102) /* (X) Send ptype w/addr on recv */
#define MIPX_NOSENDADDROPT (I_MIPX | 103) /* (X) Stop sending ptype on recv */
#define MIPX_CHECKSUM (I_MIPX | 104) /* Enable/Disable checksum */
#define MIPX_GETPKTSIZE (I_MIPX | 105) /* Get max packet size */
#define MIPX_SENDHEADER (I_MIPX | 106) /* Send header with data */
#define MIPX_NOSENDHEADER (I_MIPX | 107) /* Don't send header with data */
#define MIPX_SETCURCARD (I_MIPX | 108) /* Set current card for IOCTLs */
#define MIPX_SETMACTYPE (I_MIPX | 109) /* Set the Cards MAC type */
#define MIPX_DOSROUTE (I_MIPX | 110) /* Do source routing on this card*/
#define MIPX_NOSROUTE (I_MIPX | 111) /* Don't source routine the card*/
#define MIPX_SETRIPRETRY (I_MIPX | 112) /* Set RIP retry count */
#define MIPX_SETRIPTO (I_MIPX | 113) /* Set RIP timeout */
#define MIPX_SETTKRSAP (I_MIPX | 114) /* Set the token ring SAP */
#define MIPX_SETUSELLC (I_MIPX | 115) /* Put LLC hdr on packets */
#define MIPX_SETUSESNAP (I_MIPX | 116) /* Put SNAP hdr on packets */
#define MIPX_8023LEN (I_MIPX | 117) /* 1=make even, 0=dont make even*/
#define MIPX_SENDPTYPE (I_MIPX | 118) /* Send ptype in options on recv*/
#define MIPX_NOSENDPTYPE (I_MIPX | 119) /* Don't send ptype in options */
#define MIPX_FILTERPTYPE (I_MIPX | 120) /* Filter on recv ptype */
#define MIPX_NOFILTERPTYPE (I_MIPX | 121) /* Don't Filter on recv ptype */
#define MIPX_SETSENDPTYPE (I_MIPX | 122) /* Set pkt type to send with */
#define MIPX_GETCARDINFO (I_MIPX | 123) /* Get info on a card */
#define MIPX_SENDCARDNUM (I_MIPX | 124) /* Send card num up in options */
#define MIPX_NOSENDCARDNUM (I_MIPX | 125) /* Dont send card num in options*/
#define MIPX_SETROUTER (I_MIPX | 126) /* Set router enabled flag */
#define MIPX_SETRIPAGE (I_MIPX | 127) /* Set RIP age timeout */
#define MIPX_SETRIPUSAGE (I_MIPX | 128) /* Set RIP usage timeout */
#define MIPX_SETSROUTEUSAGE (I_MIPX| 129) /* Set the SROUTE usage timeout */
#define MIPX_SETINTNET (I_MIPX | 130) /* Set internal network number */
#define MIPX_NOVIRTADDR (I_MIPX | 131) /* Turn off virtual net num */
#define MIPX_VIRTADDR (I_MIPX | 132) /* Turn on virtual net num */
#define MIPX_GETNETINFO (I_MIPX | 135) /* Get info on a network num */
#define MIPX_SETDELAYTIME (I_MIPX | 136) /* Set cards delay time */
#define MIPX_SETROUTEADV (I_MIPX | 137) /* Route advertise timeout */
#define MIPX_SETSOCKETS (I_MIPX | 138) /* Set default sockets */
#define MIPX_SETLINKSPEED (I_MIPX | 139) /* Set the link speed for a card*/
#define MIPX_SETWANFLAG (I_MIPX | 140)
#define MIPX_GETCARDCHANGES (I_MIPX | 141) /* Wait for card changes */
#define MIPX_GETMAXADAPTERS (I_MIPX | 142)
#define MIPX_REUSEADDRESS (I_MIPX | 143)
#define MIPX_RERIPNETNUM (I_MIPX | 144) /* ReRip a network */
#define MIPX_GETNETINFO_NR (I_MIPX | 145) /* Get info on a net num - NO RIP */
#define MIPX_SETNIC (I_MIPX | 146)
#define MIPX_NOSETNIC (I_MIPX | 147)
/** For Source Routing Support **/
#define MIPX_SRCLEAR (I_MIPX | 200) /* Clear the source routing table*/
#define MIPX_SRDEF (I_MIPX | 201) /* 0=Single Rte, 1=All Routes */
#define MIPX_SRBCAST (I_MIPX | 202) /* 0=Single Rte, 1=All Routes */
#define MIPX_SRMULTI (I_MIPX | 203) /* 0=Single Rte, 1=All Routes */
#define MIPX_SRREMOVE (I_MIPX | 204) /* Remove a node from the table */
#define MIPX_SRLIST (I_MIPX | 205) /* Get the source routing table */
#define MIPX_SRGETPARMS (I_MIPX | 206) /* Get source routing parms */
#define MIPX_SETSHOULDPUT (I_MIPX | 210) /* Turn on should put call */
#define MIPX_DELSHOULDPUT (I_MIPX | 211) /* Turn off should put call */
#define MIPX_GETSHOULDPUT (I_MIPX | 212) /* Get ptr to mipx_shouldput */
/** Added for ISN **/
#define MIPX_RCVBCAST (I_MIPX | 300) /* (X) Enable broadcast reception */
#define MIPX_NORCVBCAST (I_MIPX | 301) /* (X) Disable broadcast reception */
#define MIPX_ADAPTERNUM (I_MIPX | 302) /* Get maximum adapter number */
#define MIPX_NOTIFYCARDINFO (I_MIPX | 303) /* Pend until card info changes */
#define MIPX_LOCALTARGET (I_MIPX | 304) /* Get local target for address */
#define MIPX_NETWORKINFO (I_MIPX | 305) /* Return info about remote net */
#define MIPX_ZEROSOCKET (I_MIPX | 306) /* Use 0 as source socket on sends */
#define MIPX_SETRCVFLAGS (I_MIPX | 307) /* Turn on flags in receive addr */
#define MIPX_NORCVFLAGS (I_MIPX | 308) /* Turn off flags in receive addr */
#define MIPX_CONFIG (I_MIPX | 309) /* used by IPXROUTE for config info */
#define MIPX_LINECHANGE (I_MIPX | 310) /* queued until WAN line goes up/down */
#define MIPX_GETCARDINFO2 (I_MIPX | 311) /* Get info, return real send size for token-ring */
#define MIPX_ADAPTERNUM2 (I_MIPX | 312) /* Max. number including duplicates */
//
// Used by a user mode process to get nic info defined by the IPX_NIC_INFO
// structure.
//
// NOTE NOTE NOTE
//
// This is supposed to be used only by the FWRDR process and nobody else.
// If some other app. uses it, the FWRDR will be affected
//
//
#define MIPX_GETNEWNICINFO (I_MIPX | 313) /*Get any new NIC info that might
*be there*/
//
// IOCTL to be used if the interface is ROUTER_INTERFACE
//
#define MIPX_SEND_DATAGRAM _TDI_CONTROL_CODE((I_MIPX | 314), METHOD_IN_DIRECT) // send dgram
#define MIPX_RCV_DATAGRAM _TDI_CONTROL_CODE((I_MIPX | 315), METHOD_OUT_DIRECT) // send dgram
#define MIPX_RT_CREATE (I_MIPX | 316)
#define MIPX_IPXWAN_CONFIG_DONE (I_MIPX | 317)
#define MIPX_QUERY_WAN_INACTIVITY (I_MIPX | 318)
/** Ioctls for SPX **/
#define I_MSPX (('S' << 24) | ('P' << 16) | ('P' << 8))
#define MSPX_SETADDR (I_MSPX | 0) /* Set the network address */
#define MSPX_SETPKTSIZE (I_MSPX | 1) /* Set the packet size per card */
#define MSPX_SETDATASTREAM (I_MSPX | 2) /* Set datastream type */
/** Added for NT port **/
#define MSPX_SETASLISTEN (I_MSPX | 100) /* Set as a listen socket */
#define MSPX_GETSTATUS (I_MSPX | 101) /* Get running status */
#define MSPX_GETQUEUEPTR (I_MSPX | 102) /* Get ptr to the streams queue */
#define MSPX_SETDATAACK (I_MSPX | 103) /* Set DATA ACK option */
#define MSPX_NODATAACK (I_MSPX | 104) /* Turn off DATA ACK option */
#define MSPX_SETMAXPKTSOCK (I_MSPX | 105) /* Set the packet size per socket */
#define MSPX_SETWINDOWCARD (I_MSPX | 106) /* Set window size for card */
#define MSPX_SETWINDOWSOCK (I_MSPX | 107) /* Set window size for 1 socket */
#define MSPX_SENDHEADER (I_MSPX | 108) /* Send header with data */
#define MSPX_NOSENDHEADER (I_MSPX | 109) /* Don't send header with data */
#define MSPX_GETPKTSIZE (I_MSPX | 110) /* Get the packet size per card */
#define MSPX_SETCONNCNT (I_MSPX | 111) /* Set the conn req count */
#define MSPX_SETCONNTO (I_MSPX | 112) /* Set the conn req timeout */
#define MSPX_SETALIVECNT (I_MSPX | 113) /* Set the keepalive count */
#define MSPX_SETALIVETO (I_MSPX | 114) /* Set the keepalive timeout */
#define MSPX_SETALWAYSEOM (I_MSPX | 115) /* Turn on always EOM flag */
#define MSPX_NOALWAYSEOM (I_MSPX | 116) /* Turn off always EOM flag */
#define MSPX_GETSTATS (I_MSPX | 119) /* Get connection stats */
#define MSPX_NOACKWAIT (I_MSPX | 120) /* Disable piggyback wait */
#define MSPX_ACKWAIT (I_MSPX | 121) /* Enable pback wait (default) */
//
// Taken out of isn\inc\bind.h
//
typedef struct _IPXCP_CONFIGURATION { USHORT Version; USHORT Length; UCHAR Network[4]; UCHAR LocalNode[6]; UCHAR RemoteNode[6]; ULONG ConnectionClient; // 0 - Server, 1 - Client
ULONG InterfaceIndex; ULONG ConnectionId; // used to match TimeSinceLastActivity IOCtls
ULONG IpxwanConfigRequired; // 1 - IPXWAN Required
} IPXCP_CONFIGURATION, *PIPXCP_CONFIGURATION;
#define IPXWAN_SOCKET (USHORT)0x490
|
