/*++

Copyright (c) 1997-2000 Microsoft Corporation

Module Name:

    topic.c

Abstract:

    This module contains the code that contains
    Toshiba topic cardbus controller specific initialization
    and other dispatches

Author:

    Ravisankar Pudipeddi (ravisp) 1-Nov-97
    Neil Sandlin (neilsa) 1-Jun-1999


Environment:

    Kernel mode

Revision History :

    Neil Sandlin (neilsa) 3-Mar-99
       new setpower routine interface

--*/

#include "pch.h"



VOID
TopicInitialize(
    IN PFDO_EXTENSION FdoExtension
    )
/*++

Routine Description:

    Initialize Toshiba Topic cardbus controllers

Arguments:

    FdoExtension - Pointer to the device extension for the controller FDO

Return Value:

    None
--*/
{
    UCHAR byte;
    USHORT word;

    if (FdoExtension->ControllerType == PcmciaTopic95) {
        //
        // 480CDT in a dock needs this for socket registers to be visible.
        // It should be on all the time anyway.
        //
        GetPciConfigSpace(FdoExtension, CFGSPACE_TO_CD_CTRL, &byte, 1);
        byte |= CDCTRL_PCCARD_16_32;
        SetPciConfigSpace(FdoExtension, CFGSPACE_TO_CD_CTRL, &byte, 1);
    }

     //enable 3.3V capable

    byte = PcicReadSocket(FdoExtension->SocketList, PCIC_TO_FUNC_CTRL) | TO_FCTRL_CARDPWR_ENABLE;
    PcicWriteSocket(FdoExtension->SocketList,
                    PCIC_TO_FUNC_CTRL,
                    byte);

    //
    // initialize IRQ routing to ISA
    //

    GetPciConfigSpace(FdoExtension, CFGSPACE_BRIDGE_CTRL, &word, 2);
    word |= BCTRL_IRQROUTING_ENABLE;
    SetPciConfigSpace(FdoExtension, CFGSPACE_BRIDGE_CTRL, &word, 2);
}



NTSTATUS
TopicSetPower(
    IN PSOCKET Socket,
    IN BOOLEAN Enable,
    OUT PULONG pDelayTime
    )

/*++

Routine Description:

    Set power to the specified socket.

Arguments:

    Socket - the socket to set
    Enable - TRUE means to set power - FALSE is to turn it off.
    pDelayTime - specifies delay (msec) to occur after the current phase

Return Value:

    STATUS_MORE_PROCESSING_REQUIRED - increment phase, perform delay, recall
    other status values terminate sequence

--*/

{
    NTSTATUS status;
    UCHAR               oldPower, newPower;

    if (IsCardBusCardInSocket(Socket)) {
        //
        // Hand over to generic power setting routine
        //
        return(CBSetPower(Socket, Enable, pDelayTime));
    }

    switch(Socket->PowerPhase) {
    case 1:
        //
        // R2 card - special handling
        //
        oldPower = PcicReadSocket(Socket, PCIC_PWR_RST);

        //
        // Set power values
        //
        if (Enable) {
            //
            // turn power on
            //
            newPower = PC_CARDPWR_ENABLE;

            if (Socket->Vcc == 33) {
                newPower |= PC_VCC_TOPIC_033V;
            }

            //
            // set Vpp
            //
            if (Socket->Vcc == Socket->Vpp1) {
                newPower |= PC_VPP_SETTO_VCC;
            } else if (Socket->Vpp1 == 120) {
                newPower |= PC_VPP_SETTO_VPP;
            }

        } else {
            //
            // turn power off
            //
            newPower = 0;
        }

        //
        // Don't nuke the non-power related bits in the register..
        //
        newPower |= (oldPower & PC_PWRON_BITS);
        //
        // If Vcc is turned off, reset OUTPUT_ENABLE & AUTOPWR_ENABLE
        //
        if (!(newPower & PC_CARDPWR_ENABLE)) {
            newPower &= ~PC_PWRON_BITS;
        }
        //
        // Disable ResetDrv
        //
        newPower |= PC_RESETDRV_DISABLE;

        status = STATUS_SUCCESS;
        if (newPower != oldPower) {
            PcicWriteSocket(Socket, PCIC_PWR_RST, newPower);
            //
            // Allow ramp up.. (actually we don't need to this if
            // Enable was FALSE).  Keep it for paranoia's sake
            //
            *pDelayTime = PCMCIA_PCIC_STALL_POWER;
            Socket->PowerData = (ULONG) newPower;
            status = STATUS_MORE_PROCESSING_REQUIRED;
        }
        break;

    case 2:

        newPower = (UCHAR) Socket->PowerData;

        if ((newPower & PC_CARDPWR_ENABLE) &&
             ((newPower & PC_PWRON_BITS) != PC_PWRON_BITS)) {
            //
            // More paranoia?
            //
            newPower |= PC_PWRON_BITS;
            PcicWriteSocket(Socket, PCIC_PWR_RST, newPower);
        }

        status = STATUS_SUCCESS;
        *pDelayTime = PCMCIA_PCIC_STALL_POWER;
        break;

    default:
        ASSERT(FALSE);
        status = STATUS_UNSUCCESSFUL;
    }
    return status;
}



VOID
TopicSetAudio(
    IN PSOCKET Socket,
    IN BOOLEAN Enable
    )
{
    PFDO_EXTENSION FdoExtension = Socket->DeviceExtension;
    ULONG data;
    ULONG orig_data;
    BOOLEAN setBit;


    setBit = (IsCardBusCardInSocket(Socket) ^ Enable);

    GetPciConfigSpace(FdoExtension, CFGSPACE_TO_CBREG_CTRL, &data, sizeof(data));
    orig_data = data;

    if (setBit) {
        data |= CSRCR_TO_CAUDIO_OFF;
    } else {
        data &= ~CSRCR_TO_CAUDIO_OFF;
    }

    if (orig_data != data) {
        SetPciConfigSpace(FdoExtension, CFGSPACE_TO_CBREG_CTRL, &data, sizeof(data));
    }

}



BOOLEAN
TopicSetZV(
    IN PSOCKET Socket,
    IN BOOLEAN Enable
    )
{
    UCHAR bData;

    if (Enable) {

        PcicWriteSocket(Socket, PCIC_TO_MMI_CTRL, TO_MMI_VIDEO_CTRL | TO_MMI_AUDIO_CTRL);
        bData = PcicReadSocket(Socket, PCIC_TO_ADDITIONAL_GENCTRL);
        bData |= TO_GCTRL_CARDREMOVAL_RESET;
        PcicWriteSocket(Socket, PCIC_TO_ADDITIONAL_GENCTRL, bData);

    } else {

        PcicWriteSocket(Socket, PCIC_TO_MMI_CTRL, 0);
        bData = PcicReadSocket(Socket, PCIC_TO_ADDITIONAL_GENCTRL);
        bData &= ~TO_GCTRL_CARDREMOVAL_RESET;
        PcicWriteSocket(Socket, PCIC_TO_ADDITIONAL_GENCTRL, bData);

    }
    return TRUE;
}