/*++

Copyright (c) 1990  Microsoft Corporation

Module Name:

    lazyrite.c

Abstract:

    This module implements the lazy writer for the Cache subsystem.

Author:

    Tom Miller      [TomM]      22-July-1990

Revision History:

--*/

#include "cc.h"

//
//  The Bug check file id for this module
//

#define BugCheckFileId                   (CACHE_BUG_CHECK_LAZYRITE)

//
//  Define our debug constant
//

#define me 0x00000020

//
//  Local support routines
//

PWORK_QUEUE_ENTRY
CcReadWorkQueue (
    );

VOID
CcLazyWriteScan (
    );


VOID
CcScheduleLazyWriteScan (
    IN BOOLEAN FastScan
    )

/*++

Routine Description:

    This routine may be called to schedule the next lazy writer scan,
    during which lazy write and lazy close activity is posted to other
    worker threads.  Callers should acquire the lazy writer spin lock
    to see if the scan is currently active, and then call this routine
    still holding the spin lock if not.  One special call is used at
    the end of the lazy write scan to propagate lazy write active once
    we go active.  This call is "the" scan thread, and it can therefore
    safely schedule the next scan without taking out the spin lock.

Arguments:

    FastScan - if set, make the scan happen immediately

Return Value:

    None.

--*/

{
    //
    //  It is important to set the active flag TRUE first for the propagate
    //  case, because it is conceivable that once the timer is set, another
    //  thread could actually run and make the scan go idle before we then
    //  jam the flag TRUE.
    //
    //  When going from idle to active, we delay a little longer to let the
    //  app finish saving its file.
    //

    if (FastScan) {
        
        LazyWriter.ScanActive = TRUE;
        KeSetTimer( &LazyWriter.ScanTimer, CcNoDelay, &LazyWriter.ScanDpc );

    } else if (LazyWriter.ScanActive) {

        KeSetTimer( &LazyWriter.ScanTimer, CcIdleDelay, &LazyWriter.ScanDpc );
    
    } else {

        LazyWriter.ScanActive = TRUE;
        KeSetTimer( &LazyWriter.ScanTimer, CcFirstDelay, &LazyWriter.ScanDpc );
    }
}


VOID
CcScanDpc (
    IN PKDPC Dpc,
    IN PVOID DeferredContext,
    IN PVOID SystemArgument1,
    IN PVOID SystemArgument2
    )

/*++

Routine Description:

    This is the Dpc routine which runs when the scan timer goes off.  It
    simply posts an element for an Ex Worker thread to do the scan.

Arguments:

    (All are ignored)

Return Value:

    None.

--*/

{
    PWORK_QUEUE_ENTRY WorkQueueEntry;

    UNREFERENCED_PARAMETER(Dpc);
    UNREFERENCED_PARAMETER(DeferredContext);
    UNREFERENCED_PARAMETER(SystemArgument1);
    UNREFERENCED_PARAMETER(SystemArgument2);

    WorkQueueEntry = CcAllocateWorkQueueEntry();

    //
    //  If we failed to allocate a WorkQueueEntry, things must
    //  be in pretty bad shape.  However, all we have to do is
    //  say we are not active, and wait for another event to
    //  wake things up again.
    //

    if (WorkQueueEntry == NULL) {

        LazyWriter.ScanActive = FALSE;

    } else {

        //
        //  Otherwise post a work queue entry to do the scan.
        //

        WorkQueueEntry->Function = (UCHAR)LazyWriteScan;

        CcPostWorkQueue( WorkQueueEntry, &CcRegularWorkQueue );
    }
}


NTSTATUS
CcWaitForCurrentLazyWriterActivity (
    )

/*++

Routine Description:

    This routine allows a thread to receive notification when the current tick
    of lazy writer work has completed.  It must not be called within a lazy
    writer workitem!  The caller must not be holding synchronization that could
    block a Cc workitem!

    In particular, this lets a caller insure that all available lazy closes at
    the time of the call have completed.

Arguments:

    None.

Return Value:

    Final result of the wait.

--*/

{
    KIRQL OldIrql;
    KEVENT Event;
    PWORK_QUEUE_ENTRY WorkQueueEntry;

    WorkQueueEntry = CcAllocateWorkQueueEntry();

    if (WorkQueueEntry == NULL) {
        return STATUS_INSUFFICIENT_RESOURCES;
    }

    WorkQueueEntry->Function = (UCHAR)EventSet;
    KeInitializeEvent( &Event, NotificationEvent, FALSE );
    WorkQueueEntry->Parameters.Event.Event = &Event;

    //
    //  Add this to the post-tick work queue and wake the lazy writer for it.
    //  The lazy writer will add this to the end of the next batch of work
    //  he issues.
    //

    CcAcquireMasterLock( &OldIrql );

    InsertTailList( &CcPostTickWorkQueue, &WorkQueueEntry->WorkQueueLinks );

    LazyWriter.OtherWork = TRUE;
    if (!LazyWriter.ScanActive) {
        CcScheduleLazyWriteScan( TRUE );
    }

    CcReleaseMasterLock( OldIrql );

    return KeWaitForSingleObject( &Event, Executive, KernelMode, FALSE, NULL );
}



VOID
CcLazyWriteScan (
    )

/*++

Routine Description:

    This routine implements the Lazy Writer scan for dirty data to flush
    or any other work to do (lazy close).  This routine is scheduled by
    calling CcScheduleLazyWriteScan.

Arguments:

    None.

Return Value:

    None.

--*/

{
    ULONG PagesToWrite, ForegroundRate, EstimatedDirtyNextInterval;
    PSHARED_CACHE_MAP SharedCacheMap, FirstVisited, NextSharedCacheMap;
    KIRQL OldIrql;
    ULONG LoopsWithLockHeld = 0;
    BOOLEAN AlreadyMoved = FALSE;
    BOOLEAN MoveBehindCursor = FALSE;

    LIST_ENTRY PostTickWorkQueue;

    //
    //  Top of Lazy Writer scan.
    //

    try {

        //
        //  If there is no work to do, then we will go inactive, and return.
        //

        CcAcquireMasterLock( &OldIrql );

        if ((CcTotalDirtyPages == 0) && !LazyWriter.OtherWork) {

            //
            //  Sleep if there are no deferred writes.  It is important to check
            //  proactively because writes may be blocked for reasons external
            //  to the cache manager.  The lazy writer must keep poking since it
            //  may have no bytes to write itself.
            //

#if DBG
            //
            //  In DBG builds, make sure that the CcDirtySharedCacheMapList
            //  is really empty (except for the cursor) if we are going to sleep
            //  because we think there is no more work to do.
            //
            
            {
                PLIST_ENTRY CurrentEntry = CcDirtySharedCacheMapList.SharedCacheMapLinks.Flink;
                PSHARED_CACHE_MAP CurrentScm;
                ULONG Count = 0;
                
                while( CurrentEntry != &CcDirtySharedCacheMapList.SharedCacheMapLinks ) {

                    CurrentScm = CONTAINING_RECORD( CurrentEntry,
                                                    SHARED_CACHE_MAP,
                                                    SharedCacheMapLinks );

                    if (FlagOn(CurrentScm->Flags, WAITING_FOR_TEARDOWN)) {
                        Count++;
                    }
                    CurrentEntry = CurrentEntry->Flink;
                }

                ASSERTMSG( "CcLazyWriteScan stopped scan while SCM with the flag WAITING_FOR_TEARDOWN are still in the dirty list!\n",
                           Count == 0 );
            }
#endif

            if (IsListEmpty(&CcDeferredWrites)) {

                LazyWriter.ScanActive = FALSE;
                CcReleaseMasterLock( OldIrql );

            } else {

                CcReleaseMasterLock( OldIrql );

                //
                //  Check for writes and schedule the next scan.
                //

                CcPostDeferredWrites();
                CcScheduleLazyWriteScan( FALSE );
            }

            return;
        }

        //
        //  Pull out the post tick workitems for this pass.  It is important that
        //  we are doing this at the top since more could be queued as we rummage
        //  for work to do.  Post tick workitems are guaranteed to occur after all
        //  work generated in a complete scan.
        //

        InitializeListHead( &PostTickWorkQueue );
        while (!IsListEmpty( &CcPostTickWorkQueue )) {

            PLIST_ENTRY Entry = RemoveHeadList( &CcPostTickWorkQueue );
            InsertTailList( &PostTickWorkQueue, Entry );
        }

        //
        //  Calculate the next sweep time stamp, then update all relevant fields for
        //  the next time around.  Also we can clear the OtherWork flag.
        //

        LazyWriter.OtherWork = FALSE;

        //
        //  Assume we will write our usual fraction of dirty pages.  Do not do the
        //  divide if there is not enough dirty pages, or else we will never write
        //  the last few pages.
        //

        PagesToWrite = CcTotalDirtyPages;
        if (PagesToWrite > LAZY_WRITER_MAX_AGE_TARGET) {
            PagesToWrite /= LAZY_WRITER_MAX_AGE_TARGET;
        }

        //
        //  Estimate the rate of dirty pages being produced in the foreground.
        //  This is the total number of dirty pages now plus the number of dirty
        //  pages we scheduled to write last time, minus the number of dirty
        //  pages we have now.  Throw out any cases which would not produce a
        //  positive rate.
        //

        ForegroundRate = 0;

        if ((CcTotalDirtyPages + CcPagesWrittenLastTime) > CcDirtyPagesLastScan) {
            ForegroundRate = (CcTotalDirtyPages + CcPagesWrittenLastTime) -
                             CcDirtyPagesLastScan;
        }

        //
        //  If we estimate that we will exceed our dirty page target by the end
        //  of this interval, then we must write more.  Try to arrive on target.
        //

        EstimatedDirtyNextInterval = CcTotalDirtyPages - PagesToWrite + ForegroundRate;

        if (EstimatedDirtyNextInterval > CcDirtyPageTarget) {

            PagesToWrite += EstimatedDirtyNextInterval - CcDirtyPageTarget;
        }

        //
        //  Now save away the number of dirty pages and the number of pages we
        //  just calculated to write.
        //

        CcDirtyPagesLastScan = CcTotalDirtyPages;
        CcPagesYetToWrite = CcPagesWrittenLastTime = PagesToWrite;

        //
        //  Loop to flush enough Shared Cache Maps to write the number of pages
        //  we just calculated.
        //

        SharedCacheMap = CONTAINING_RECORD( CcLazyWriterCursor.SharedCacheMapLinks.Flink,
                                            SHARED_CACHE_MAP,
                                            SharedCacheMapLinks );

        DebugTrace( 0, me, "Start of Lazy Writer Scan\n", 0 );

        //
        //  Normally we would just like to visit every Cache Map once on each scan,
        //  so the scan will terminate normally when we return to FirstVisited.  But
        //  in the off chance that FirstVisited gets deleted, we are guaranteed to stop
        //  when we get back to our own listhead.
        //

        FirstVisited = NULL;
        while ((SharedCacheMap != FirstVisited) &&
               (&SharedCacheMap->SharedCacheMapLinks != &CcLazyWriterCursor.SharedCacheMapLinks)) {

            if (FirstVisited == NULL) {
                FirstVisited = SharedCacheMap;
            }

            //
            //  Skip the SharedCacheMap if a write behind request is
            //  already queued, write behind has been disabled, or
            //  if there is no work to do (either dirty data to be written
            //  or a delete is required).
            //
            //  Note that for streams where modified writing is disabled, we
            //  need to take out Bcbs exclusive, which serializes with foreground
            //  activity.  Therefore we use a special counter in the SharedCacheMap
            //  to only service these once every n intervals.
            //
            //  Skip temporary files unless we currently could not write as many
            //  bytes as we might charge some hapless thread for throttling, unless
            //  it has been closed.  We assume that the "tick" of the lazy writer,
            //  delayed temporarily by the passcount check, will permit the common
            //  open/write/close/delete action on temporary files to sneak in and
            //  truncate the file before we really write the data, if the file was
            //  not opened delete-on-close to begin with.
            //
            //  Since we will write closed files with dirty pages as part of the
            //  regular pass (even temporary ones), only do lazy close on files
            //  with no dirty pages.
            //

            if (!FlagOn(SharedCacheMap->Flags, WRITE_QUEUED | IS_CURSOR)

                    &&

                (((SharedCacheMap->DirtyPages != 0) 
                           &&
                   (FlagOn(SharedCacheMap->Flags, WAITING_FOR_TEARDOWN)
                                ||
                    ((PagesToWrite != 0)
                                        && 
                     (((++SharedCacheMap->LazyWritePassCount & 0xF) == 0) ||
                      !FlagOn(SharedCacheMap->Flags, MODIFIED_WRITE_DISABLED) ||
                      (CcCapturedSystemSize == MmSmallSystem) ||
                      (SharedCacheMap->DirtyPages >= (4 * (MAX_WRITE_BEHIND / PAGE_SIZE))))
                                        &&
                     (!FlagOn(SharedCacheMap->FileObject->Flags, FO_TEMPORARY_FILE) ||
                      (SharedCacheMap->OpenCount == 0) ||
                      !CcCanIWrite(SharedCacheMap->FileObject, WRITE_CHARGE_THRESHOLD, FALSE, MAXUCHAR)))))

                    ||

                 ((SharedCacheMap->OpenCount == 0) &&
                  (SharedCacheMap->DirtyPages == 0) ||
                  (SharedCacheMap->FileSize.QuadPart == 0)))) {

                PWORK_QUEUE_ENTRY WorkQueueEntry;

                //
                //  If this is a metadata stream with at least 4 times
                //  the maximum write behind I/O size, then let's tell
                //  this guy to write 1/8 of his dirty data on this pass
                //  so it doesn't build up.
                //
                //  Else assume we can write everything (PagesToWrite only affects
                //  metadata streams - otherwise writing is controlled by the Mbcb -
                //  this throttle is engaged in CcWriteBehind).
                //

                SharedCacheMap->PagesToWrite = SharedCacheMap->DirtyPages;

                if (FlagOn(SharedCacheMap->Flags, MODIFIED_WRITE_DISABLED) &&
                    (SharedCacheMap->PagesToWrite >= (4 * (MAX_WRITE_BEHIND / PAGE_SIZE))) &&
                    (CcCapturedSystemSize != MmSmallSystem)) {

                    SharedCacheMap->PagesToWrite /= 8;
                }

                //
                //  If still searching for pages to write, adjust our targets.
                //

                if (!AlreadyMoved) {

                    //
                    //  See if he exhausts the number of pages to write.  (We
                    //  keep going in case there are any closes to do.)
                    //

                    if (SharedCacheMap->PagesToWrite >= PagesToWrite) {

                        //
                        //  Here is where we should move the cursor to.  Figure
                        //  out if we should resume on this stream or the next one.
                        //

                        //
                        //  For Metadata streams, set up to resume on the next stream on the
                        //  next scan.  Also force a push forward every n intervals if all of
                        //  the pages came from this stream, so we don't get preoccupied with
                        //  one stream at the expense of others (which may be waiting for a
                        //  lazy close).  Normally we would like to avoid seek overhead and
                        //  take the common case of a large sequential series of writes.
                        //
                        //  This is similar to hotspot detection.
                        //
                        //  Note, to ensure that we iterate through the entire
                        //  CcDirtySharedCacheMap list, we cannot move this shared
                        //  cache map behind the cursor now.  We will just 
                        //  remember that we want to move this to the end of the 
                        //  list and do the actual move when we are ready to read
                        //  the next entry.
                        //

                        if (FlagOn(SharedCacheMap->Flags, MODIFIED_WRITE_DISABLED) ||
                            ((FirstVisited == SharedCacheMap) &&
                             ((SharedCacheMap->LazyWritePassCount & 0xF) == 0))) {

                            MoveBehindCursor = TRUE;

                        //
                        //  For other streams, set up to resume on the same stream on the
                        //  next scan.
                        //

                        } else {

                            RemoveEntryList( &CcLazyWriterCursor.SharedCacheMapLinks );
                            InsertTailList( &SharedCacheMap->SharedCacheMapLinks, &CcLazyWriterCursor.SharedCacheMapLinks );
                        }

                        PagesToWrite = 0;
                        AlreadyMoved = TRUE;

                    } else {

                        PagesToWrite -= SharedCacheMap->PagesToWrite;
                    }
                }

                //
                //  Otherwise show we are actively writing, and keep it in the dirty
                //  list.
                //

                SetFlag(SharedCacheMap->Flags, WRITE_QUEUED);
                SharedCacheMap->DirtyPages += 1;

                CcReleaseMasterLock( OldIrql );

                //
                //  Queue the request to do the work to a worker thread.
                //

                WorkQueueEntry = CcAllocateWorkQueueEntry();

                //
                //  If we failed to allocate a WorkQueueEntry, things must
                //  be in pretty bad shape.  However, all we have to do is
                //  break out of our current loop, and try to go back and
                //  delay a while.  Even if the current guy should have gone
                //  away when we clear WRITE_QUEUED, we will find him again
                //  in the LW scan.
                //

                if (WorkQueueEntry == NULL) {

                    CcAcquireMasterLock( &OldIrql );
                    ClearFlag(SharedCacheMap->Flags, WRITE_QUEUED);
                    SharedCacheMap->DirtyPages -= 1;
                    break;
                }

                WorkQueueEntry->Function = (UCHAR)WriteBehind;
                WorkQueueEntry->Parameters.Write.SharedCacheMap = SharedCacheMap;

                //
                //  Post it to the regular work queue.
                //

                CcAcquireMasterLock( &OldIrql );
                SharedCacheMap->DirtyPages -= 1;

                if (FlagOn( SharedCacheMap->Flags, WAITING_FOR_TEARDOWN )) {

                    //
                    //  If we are waiting for this shared cache map to be torn
                    //  down, put it at the head of the express work queue so
                    //  that it gets processed right away.
                    //
                    
                    CcPostWorkQueue( WorkQueueEntry, &CcExpressWorkQueue );

                } else {

                    //
                    //  We aren't anxiously awaiting for this shared cached map
                    //  to go away, so just process this work item via the 
                    //  regular work queue.
                    //

                    CcPostWorkQueue( WorkQueueEntry, &CcRegularWorkQueue );
                }

                LoopsWithLockHeld = 0;

            //
            //  Make sure we occasionally drop the lock.  Set WRITE_QUEUED
            //  to keep the guy from going away.
            //

            } else if ((++LoopsWithLockHeld >= 20) &&
                       !FlagOn(SharedCacheMap->Flags, WRITE_QUEUED | IS_CURSOR)) {

                SetFlag(SharedCacheMap->Flags, WRITE_QUEUED);
                SharedCacheMap->DirtyPages += 1;
                CcReleaseMasterLock( OldIrql );
                LoopsWithLockHeld = 0;
                CcAcquireMasterLock( &OldIrql );
                ClearFlag(SharedCacheMap->Flags, WRITE_QUEUED);
                SharedCacheMap->DirtyPages -= 1;
            }

            //
            //  Now loop back.
            //
            //  If we want to put this shared cache map at the end of the 
            //  dirty list, we will do it AFTER we determine the next shared
            //  cache map to go to.  This ensures that we loop through the entire
            //  list during this scan tick.
            //

            NextSharedCacheMap =
                CONTAINING_RECORD( SharedCacheMap->SharedCacheMapLinks.Flink,
                                   SHARED_CACHE_MAP,
                                   SharedCacheMapLinks );

            if (MoveBehindCursor) {

                RemoveEntryList( &CcLazyWriterCursor.SharedCacheMapLinks );
                InsertHeadList( &SharedCacheMap->SharedCacheMapLinks, &CcLazyWriterCursor.SharedCacheMapLinks );
                MoveBehindCursor = FALSE;
            }

            SharedCacheMap = NextSharedCacheMap;
        }

        DebugTrace( 0, me, "End of Lazy Writer Scan\n", 0 );

        //
        //  Queue up our  post tick workitems for this pass.
        //

        while (!IsListEmpty( &PostTickWorkQueue )) {

            PLIST_ENTRY Entry = RemoveHeadList( &PostTickWorkQueue );
            CcPostWorkQueue( CONTAINING_RECORD( Entry, WORK_QUEUE_ENTRY, WorkQueueLinks ),
                             &CcRegularWorkQueue );
        }

        //
        //  Now we can release the global list and loop back, per chance to sleep.
        //

        CcReleaseMasterLock( OldIrql );

        //
        //  Once again we need to give the deferred writes a poke.  We can have all dirty
        //  pages on disable_write_behind files but also have an external condition that
        //  caused the cached IO to be deferred. If so, this serves as our only chance to
        //  issue it when the condition clears.
        //
        //  Case hit on ForrestF's 5gb Alpha, 1/12/99.
        //

        if (!IsListEmpty(&CcDeferredWrites)) {

            CcPostDeferredWrites();
        }

        //
        //  Now go ahead and schedule the next scan.
        //

        CcScheduleLazyWriteScan( FALSE );

    //
    //  Basically, the Lazy Writer thread should never get an exception,
    //  so we put a try-except around it that bug checks one way or the other.
    //  Better we bug check here than worry about what happens if we let one
    //  get by.
    //

    } except( CcExceptionFilter( GetExceptionCode() )) {

        CcBugCheck( GetExceptionCode(), 0, 0 );
    }
}


//
//  Internal support routine
//

LONG
CcExceptionFilter (
    IN NTSTATUS ExceptionCode
    )

/*++

Routine Description:

    This is the standard exception filter for worker threads which simply
    calls an FsRtl routine to see if an expected status is being raised.
    If so, the exception is handled, else we bug check.

Arguments:

    ExceptionCode - the exception code which was raised.

Return Value:

    EXCEPTION_EXECUTE_HANDLER if expected, else a Bug Check occurs.

--*/

{
    DebugTrace(0, 0, "CcExceptionFilter %08lx\n", ExceptionCode);

    if (FsRtlIsNtstatusExpected( ExceptionCode )) {

        return EXCEPTION_EXECUTE_HANDLER;

    } else {

        return EXCEPTION_CONTINUE_SEARCH;
    }
}



//
//  Internal support routine
//

VOID
FASTCALL
CcPostWorkQueue (
    IN PWORK_QUEUE_ENTRY WorkQueueEntry,
    IN PLIST_ENTRY WorkQueue
    )

/*++

Routine Description:

    This routine queues a WorkQueueEntry, which has been allocated and
    initialized by the caller, to the WorkQueue for FIFO processing by
    the work threads.

Arguments:

    WorkQueueEntry - supplies a pointer to the entry to queue

Return Value:

    None

--*/

{
    KIRQL OldIrql;
    PLIST_ENTRY WorkerThreadEntry = NULL;

    ASSERT(FIELD_OFFSET(WORK_QUEUE_ITEM, List) == 0);

    DebugTrace(+1, me, "CcPostWorkQueue:\n", 0 );
    DebugTrace( 0, me, "    WorkQueueEntry = %08lx\n", WorkQueueEntry );

    //
    //  Queue the entry to the respective work queue.
    //

    CcAcquireWorkQueueLock( &OldIrql );
    InsertTailList( WorkQueue, &WorkQueueEntry->WorkQueueLinks );

    //
    //  Now, if we aren't throttled and have any more idle threads we can
    //  use, activate one.
    //

    if (!CcQueueThrottle && !IsListEmpty(&CcIdleWorkerThreadList)) {
        WorkerThreadEntry = RemoveHeadList( &CcIdleWorkerThreadList );
        CcNumberActiveWorkerThreads += 1;
    }
    CcReleaseWorkQueueLock( OldIrql );

    if (WorkerThreadEntry != NULL) {

        //
        //  I had to peak in the sources to verify that this routine
        //  is a noop if the Flink is not NULL.  Sheeeeit!
        //

        ((PWORK_QUEUE_ITEM)WorkerThreadEntry)->List.Flink = NULL;
        ExQueueWorkItem( (PWORK_QUEUE_ITEM)WorkerThreadEntry, CriticalWorkQueue );
    }

    //
    //  And return to our caller
    //

    DebugTrace(-1, me, "CcPostWorkQueue -> VOID\n", 0 );

    return;
}


//
//  Internal support routine
//

VOID
CcWorkerThread (
    PVOID ExWorkQueueItem
    )

/*++

Routine Description:

    This is worker thread routine for processing cache manager work queue
    entries.

Arguments:

    ExWorkQueueItem - The work item used for this thread

Return Value:

    None

--*/

{
    KIRQL OldIrql;
    PLIST_ENTRY WorkQueue;
    PWORK_QUEUE_ENTRY WorkQueueEntry;
    BOOLEAN RescanOk = FALSE;
    BOOLEAN DropThrottle = FALSE;
    IO_STATUS_BLOCK IoStatus;

    IoStatus.Status = STATUS_SUCCESS;
    IoStatus.Information = 0;

    ASSERT(FIELD_OFFSET(WORK_QUEUE_ENTRY, WorkQueueLinks) == 0);

    while (TRUE) {

        CcAcquireWorkQueueLock( &OldIrql );

        //
        //  If we just processed a throttled operation, drop the flag.
        //

        if (DropThrottle) {

            DropThrottle = CcQueueThrottle = FALSE;
        }

        //
        //  On requeue, push at end of the source queue and clear hint.
        //

        if (IoStatus.Information == CC_REQUEUE) {

            InsertTailList( WorkQueue, &WorkQueueEntry->WorkQueueLinks );
            IoStatus.Information = 0;
        }

        //
        //  First see if there is something in the express queue.
        //

        if (!IsListEmpty(&CcExpressWorkQueue)) {
            WorkQueue = &CcExpressWorkQueue;

        //
        //  If there was nothing there, then try the regular queue.
        //

        } else if (!IsListEmpty(&CcRegularWorkQueue)) {
            WorkQueue = &CcRegularWorkQueue;

        //
        //  Else we can break and go idle.
        //

        } else {

            break;
        }

        WorkQueueEntry = CONTAINING_RECORD( WorkQueue->Flink, WORK_QUEUE_ENTRY, WorkQueueLinks );

        //
        //  If this is an EventSet, throttle down to a single thread to be sure
        //  that this event fires after all preceeding workitems have completed.
        //

        if (WorkQueueEntry->Function == EventSet && CcNumberActiveWorkerThreads > 1) {

            CcQueueThrottle = TRUE;
            break;
        }

        //
        //  Pop the workitem off: we will execute it now.
        //

        RemoveHeadList( WorkQueue );

        CcReleaseWorkQueueLock( OldIrql );

        //
        //  Process the entry within a try-except clause, so that any errors
        //  will cause us to continue after the called routine has unwound.
        //

        try {

            switch (WorkQueueEntry->Function) {

            //
            //  Perform read ahead
            //

            case ReadAhead:

                DebugTrace( 0, me, "CcWorkerThread Read Ahead FileObject = %08lx\n",
                            WorkQueueEntry->Parameters.Read.FileObject );

                CcPerformReadAhead( WorkQueueEntry->Parameters.Read.FileObject );

                break;

            //
            //  Perform write behind
            //

            case WriteBehind:

                DebugTrace( 0, me, "CcWorkerThread WriteBehind SharedCacheMap = %08lx\n",
                            WorkQueueEntry->Parameters.Write.SharedCacheMap );

                //
                //  While CcWriteBehind is running, we mark this thread as a
                //  MemoryMaker so that Mm will allow pool allocations to 
                //  succeed when we are getting into low-resource situations.
                //  This helps avoid loss delayed write error in low-resource
                //  scenarios.
                //

                PsGetCurrentThread()->MemoryMaker = 1;

                CcWriteBehind( WorkQueueEntry->Parameters.Write.SharedCacheMap, &IoStatus );
                RescanOk = (BOOLEAN)NT_SUCCESS(IoStatus.Status);

                PsGetCurrentThread()->MemoryMaker = 0;
                break;


            //
            //  Perform set event
            //
        
            case EventSet:

                DebugTrace( 0, me, "CcWorkerThread SetEvent Event = %08lx\n",
                            WorkQueueEntry->Parameters.Event.Event );

                KeSetEvent( WorkQueueEntry->Parameters.Event.Event, 0, FALSE );
                DropThrottle = TRUE;
                break;

            //
            //  Perform Lazy Write Scan
            //

            case LazyWriteScan:

                DebugTrace( 0, me, "CcWorkerThread Lazy Write Scan\n", 0 );

                CcLazyWriteScan();
                break;
            }

        }
        except( CcExceptionFilter( GetExceptionCode() )) {

            //
            //  If we hit an exception in this thread, we need to make sure
            //  that if we had made this thread a memory maker that flag is
            //  cleared in the thread structure because this thread will be
            //  reused by arbitrary system worker threads that should not have
            //  this designation.
            //
            
            if (WorkQueueEntry->Function == WriteBehind) {
                
                PsGetCurrentThread()->MemoryMaker = 0;
            }
        }

        //
        //  If not a requeue request, free the workitem.
        //

        if (IoStatus.Information != CC_REQUEUE) {

            CcFreeWorkQueueEntry( WorkQueueEntry );
        }
    }

    //
    //  No more work.  Requeue our worker thread entry and get out.
    //

    InsertTailList( &CcIdleWorkerThreadList,
                    &((PWORK_QUEUE_ITEM)ExWorkQueueItem)->List );
    CcNumberActiveWorkerThreads -= 1;

    CcReleaseWorkQueueLock( OldIrql );

    if (!IsListEmpty(&CcDeferredWrites) && (CcTotalDirtyPages >= 20) && RescanOk) {
        CcLazyWriteScan();
    }

    return;
}