/*++ Copyright (C) 1992-9 Microsoft Corporation Module Name: print.c Abstract: The printer class driver tranlates IRPs to SRBs with embedded CDBs and sends them to its devices through the port driver. Author: Mike Glass (mglass) Environment: kernel mode only Notes: Revision History: georgioc - Made into a pnp class driver independent of the underlying storage bus using the new storage/classpnp dankn, 22-Jul-99 : Added ability to block & resubmit failed writes for 1394 printers to behave more like other print stacks (i.e. USB) and therefore keep USBMON.DLL (the Win2k port monitor) happy. USBMON does not deal well with failed writes. --*/ #include "printpnp.h" #include "ntddser.h" NTSTATUS PrinterOpenClose( IN PDEVICE_OBJECT Fdo, IN PIRP Irp ) /*++ Routine Description: This routine is called to establish a connection to the printer class driver. It does no more than return STATUS_SUCCESS. Arguments: DeviceObject - Device object for a printer. Irp - Open or Close request packet Return Value: NT Status - STATUS_SUCCESS --*/ { PFUNCTIONAL_DEVICE_EXTENSION fdoExtension = Fdo->DeviceExtension; PIO_STACK_LOCATION irpStack = IoGetCurrentIrpStackLocation(Irp); // // Set status in Irp. // Irp->IoStatus.Status = STATUS_SUCCESS; // // forward irp. // ClassReleaseRemoveLock (Fdo, Irp); IoCopyCurrentIrpStackLocationToNext(Irp); return IoCallDriver(fdoExtension->CommonExtension.LowerDeviceObject, Irp); } // end PrinterOpenClose() NTSTATUS BuildPrintRequest( PDEVICE_OBJECT Fdo, PIRP Irp ) /*++ Routine Description: Build SRB and CDB requests to scsi printer. Arguments: DeviceObject - Device object representing this printer device. Irp - System IO request packet. Return Value: None. --*/ { PFUNCTIONAL_DEVICE_EXTENSION deviceExtension = Fdo->DeviceExtension; PIO_COMPLETION_ROUTINE completionRoutine; PIO_STACK_LOCATION currentIrpStack = IoGetCurrentIrpStackLocation(Irp); PIO_STACK_LOCATION nextIrpStack = IoGetNextIrpStackLocation(Irp); PSCSI_REQUEST_BLOCK srb; PCDB cdb; ULONG transferLength; // // Allocate Srb from nonpaged pool. // This call must succeed. // srb = ExAllocatePool(NonPagedPool, SCSI_REQUEST_BLOCK_SIZE); if (srb == NULL) { return STATUS_INSUFFICIENT_RESOURCES; } srb->SrbFlags = 0; // // Write length to SRB. // srb->Length = SCSI_REQUEST_BLOCK_SIZE; // // Set up IRP Address. // srb->OriginalRequest = Irp; // // Set up target id and logical unit number. // srb->Function = SRB_FUNCTION_EXECUTE_SCSI; srb->DataBuffer = MmGetMdlVirtualAddress(Irp->MdlAddress); // // Save byte count of transfer in SRB Extension. // srb->DataTransferLength = currentIrpStack->Parameters.Write.Length; // // Transfer length should never be greater than MAX_PRINT_XFER // ASSERT(srb->DataTransferLength <= MAX_PRINT_XFER); // // Initialize the queue actions field. // srb->QueueAction = SRB_SIMPLE_TAG_REQUEST; // // Queue sort key is not used. // srb->QueueSortKey = 0; // // Indicate auto request sense by specifying buffer and size. // srb->SenseInfoBuffer = deviceExtension->SenseData; srb->SenseInfoBufferLength = SENSE_BUFFER_SIZE; // // Set timeout value in seconds. // srb->TimeOutValue = deviceExtension->TimeOutValue; // // Zero statuses. // srb->SrbStatus = srb->ScsiStatus = 0; srb->NextSrb = 0; // // Get number of bytes to transfer. // transferLength = currentIrpStack->Parameters.Write.Length; // // Get pointer to CDB in SRB. // cdb = (PCDB) srb->Cdb; // // Init 10-byte READ CDB's for reads (per scanner device READ spec // in SCSI-2), and 6-byte PRINT CDB's for writes // if (currentIrpStack->MajorFunction == IRP_MJ_READ) { srb->CdbLength = 10; srb->SrbFlags = SRB_FLAGS_DATA_IN; RtlZeroMemory (cdb, 10); cdb->CDB10.OperationCode = SCSIOP_READ; // // Move little endian values into CDB in big endian format. // cdb->CDB10.TransferBlocksLsb = ((PFOUR_BYTE) &transferLength)->Byte0; cdb->CDB10.TransferBlocksMsb = ((PFOUR_BYTE) &transferLength)->Byte1; cdb->CDB10.Reserved2 = ((PFOUR_BYTE) &transferLength)->Byte2; // // For read's we always use the ClassIoComplete completion routine // completionRoutine = ClassIoComplete; } else { srb->CdbLength = 6; srb->SrbFlags = SRB_FLAGS_DATA_OUT; cdb->PRINT.OperationCode = SCSIOP_PRINT; cdb->PRINT.Reserved = 0; cdb->PRINT.LogicalUnitNumber = 0; // // Move little endian values into CDB in big endian format. // cdb->PRINT.TransferLength[2] = ((PFOUR_BYTE) &transferLength)->Byte0; cdb->PRINT.TransferLength[1] = ((PFOUR_BYTE) &transferLength)->Byte1; cdb->PRINT.TransferLength[0] = ((PFOUR_BYTE) &transferLength)->Byte2; cdb->PRINT.Control = 0; // // Set the appropriate write/print completion routine // completionRoutine = ((PPRINTER_DATA) deviceExtension-> CommonExtension.DriverData)->WriteCompletionRoutine; } // // Or in the default flags from the device object. // srb->SrbFlags |= deviceExtension->SrbFlags; // // Set up major SCSI function. // nextIrpStack->MajorFunction = IRP_MJ_SCSI; // // Save SRB address in next stack for port driver. // nextIrpStack->Parameters.Scsi.Srb = srb; // // Save retry count in current IRP stack. // currentIrpStack->Parameters.Others.Argument4 = (PVOID)MAXIMUM_RETRIES; // // Set up IoCompletion routine address. // IoSetCompletionRoutine(Irp, completionRoutine, srb, TRUE, TRUE, TRUE); return STATUS_SUCCESS; } // end BuildPrintRequest() NTSTATUS PrinterReadWrite( IN PDEVICE_OBJECT Fdo, IN PIRP Irp ) /*++ Routine Description: This is the entry called by the I/O system for print requests. It builds the SRB and sends it to the port driver. Arguments: DeviceObject - the system object for the device. Irp - IRP involved. Return Value: NT Status --*/ { PFUNCTIONAL_DEVICE_EXTENSION deviceExtension = Fdo->DeviceExtension; PIO_STACK_LOCATION currentIrpStack = IoGetCurrentIrpStackLocation(Irp); ULONG transferByteCount = currentIrpStack->Parameters.Write.Length; ULONG maximumTransferLength; ULONG transferPages; NTSTATUS Status; DEBUGPRINT3(("PrinterReadWrite: Enter routine\n")); if (deviceExtension->AdapterDescriptor == NULL) { // // device removed.. // DEBUGPRINT3(("PrinterReadWrite: Device removed(!!)\n")); Irp->IoStatus.Status = STATUS_DEVICE_DOES_NOT_EXIST; Irp->IoStatus.Information = 0; return STATUS_DEVICE_DOES_NOT_EXIST; } maximumTransferLength = deviceExtension->AdapterDescriptor->MaximumTransferLength; // // Calculate number of pages in this transfer. // transferPages = ADDRESS_AND_SIZE_TO_SPAN_PAGES( MmGetMdlVirtualAddress(Irp->MdlAddress), currentIrpStack->Parameters.Write.Length); // // Check if hardware maximum transfer length is larger than SCSI // print command can handle. If so, lower the maximum allowed to // the SCSI print maximum. // if (maximumTransferLength > MAX_PRINT_XFER) maximumTransferLength = MAX_PRINT_XFER; // // Check if request length is greater than the maximum number of // bytes that the hardware can transfer. // if (currentIrpStack->Parameters.Write.Length > maximumTransferLength || transferPages > deviceExtension->AdapterDescriptor->MaximumPhysicalPages) { transferPages = deviceExtension->AdapterDescriptor->MaximumPhysicalPages - 1; if (maximumTransferLength > transferPages << PAGE_SHIFT ) { maximumTransferLength = transferPages << PAGE_SHIFT; } // // Check that maximum transfer size is not zero. // if (maximumTransferLength == 0) { maximumTransferLength = PAGE_SIZE; } // // Mark IRP with status pending. // IoMarkIrpPending(Irp); // // Request greater than port driver maximum. // Break up into smaller routines. // SplitRequest(Fdo, Irp, maximumTransferLength); return STATUS_PENDING; } // // Build SRB and CDB for this IRP. // Status = BuildPrintRequest(Fdo, Irp); if (!NT_SUCCESS (Status)) { return Status; } // // Return the results of the call to the port driver. // return IoCallDriver(deviceExtension->CommonExtension.LowerDeviceObject, Irp); } // end ScsiPrinterWrite() NTSTATUS PrinterDeviceControl( IN PDEVICE_OBJECT Fdo, IN PIRP Irp ) /*++ Routine Description: This is the NT device control handler for Printers. Arguments: DeviceObject - for this Printer Irp - IO Request packet Return Value: NTSTATUS --*/ { PVOID buffer = Irp->AssociatedIrp.SystemBuffer; NTSTATUS status; PIO_STACK_LOCATION irpStack = IoGetCurrentIrpStackLocation(Irp); PFUNCTIONAL_DEVICE_EXTENSION deviceExtension = Fdo->DeviceExtension; DEBUGPRINT2 (("PrinterDeviceControl: enter, Fdo=x%p, Ioctl=", Fdo)); // // Zero CDB in SRB on stack. // switch (irpStack->Parameters.DeviceIoControl.IoControlCode) { case IOCTL_SERIAL_SET_TIMEOUTS: { PSERIAL_TIMEOUTS newTimeouts = ((PSERIAL_TIMEOUTS) buffer); DEBUGPRINT2 (("SET_TIMEOUTS\n")); if (irpStack->Parameters.DeviceIoControl.InputBufferLength < sizeof(SERIAL_TIMEOUTS)) { status = STATUS_BUFFER_TOO_SMALL; } else if (newTimeouts->WriteTotalTimeoutConstant < 2000) { status = STATUS_INVALID_PARAMETER; } else { deviceExtension->TimeOutValue = newTimeouts->WriteTotalTimeoutConstant / 1000; status = STATUS_SUCCESS; } break; } case IOCTL_SERIAL_GET_TIMEOUTS: DEBUGPRINT2(("GET_TIMEOUTS\n")); if (irpStack->Parameters.DeviceIoControl.OutputBufferLength < sizeof(SERIAL_TIMEOUTS)) { status = STATUS_BUFFER_TOO_SMALL; } else { RtlZeroMemory (buffer, sizeof (SERIAL_TIMEOUTS)); Irp->IoStatus.Information = sizeof(SERIAL_TIMEOUTS); ((PSERIAL_TIMEOUTS) buffer)->WriteTotalTimeoutConstant = deviceExtension->TimeOutValue * 1000; status = STATUS_SUCCESS; } break; case IOCTL_USBPRINT_GET_LPT_STATUS: // // We support this ioctl for USBMON.DLL's sake. Other print // stacks will block failed writes, and eventually USBMON // will send them this ioctl to see if the printer is out // of paper, which will be indicated by the state of the // 0x20 bit in the returned UCHAR value. // if (irpStack->Parameters.DeviceIoControl.OutputBufferLength < sizeof(UCHAR)) { status = STATUS_BUFFER_TOO_SMALL; } else if (deviceExtension->AdapterDescriptor->BusType != BusType1394) { status = STATUS_INVALID_PARAMETER; } else { PPRINTER_DATA printerData; printerData = (PPRINTER_DATA) deviceExtension->CommonExtension.DriverData; Irp->IoStatus.Information = sizeof (UCHAR); *((UCHAR *) buffer) = (printerData->LastWriteStatus == STATUS_NO_MEDIA_IN_DEVICE ? 0x20 : 0); DEBUGPRINT2(( "GET_LPT_STATUS (=x%x)\n", (ULONG) *((UCHAR *) buffer) )); status = STATUS_SUCCESS; } break; case IOCTL_SCSIPRNT_1394_BLOCKING_WRITE: // // This ioctl en/disables the blocking write functionality // (for failed writes) on 1394 devices. By default we // block writes which fail on 1394 devices (until the write // finally succeeds or is cancelled), but a smart port // monitor could send this ioctl down to disable blocking // so it would get write error notifications asap. // if (irpStack->Parameters.DeviceIoControl.InputBufferLength < sizeof(UCHAR)) { status = STATUS_BUFFER_TOO_SMALL; } else if (deviceExtension->AdapterDescriptor->BusType != BusType1394) { status = STATUS_INVALID_PARAMETER; } else { PPRINTER_DATA printerData; printerData = (PPRINTER_DATA) deviceExtension->CommonExtension.DriverData; printerData->WriteCompletionRoutine = (*((UCHAR *) buffer) ? PrinterWriteComplete : ClassIoComplete); status = STATUS_SUCCESS; } break; default: // // Pass the request to the common device control routine. // DEBUGPRINT2(( "x%x\n", irpStack->Parameters.DeviceIoControl.IoControlCode )); return(ClassDeviceControl(Fdo, Irp)); break; } // end switch() // // Update IRP with completion status. // Irp->IoStatus.Status = status; // // Complete the request. // IoCompleteRequest(Irp, IO_DISK_INCREMENT); // // Release the remove lock (which ClassDeviceControl does) // ClassReleaseRemoveLock(Fdo, Irp); DEBUGPRINT2(( "PrinterDeviceControl: Status is %lx\n", status)); return status; } // end ScsiPrinterDeviceControl() VOID SplitRequest( IN PDEVICE_OBJECT Fdo, IN PIRP Irp, IN ULONG MaximumBytes ) /*++ Routine Description: Break request into smaller requests. Each new request will be the maximum transfer size that the port driver can handle or if it is the final request, it may be the residual size. The number of IRPs required to process this request is written in the current stack of the original IRP. Then as each new IRP completes the count in the original IRP is decremented. When the count goes to zero, the original IRP is completed. Arguments: DeviceObject - Pointer to the class device object to be addressed. Irp - Pointer to Irp the orginal request. Return Value: None. --*/ { PFUNCTIONAL_DEVICE_EXTENSION deviceExtension = Fdo->DeviceExtension; PIO_STACK_LOCATION currentIrpStack = IoGetCurrentIrpStackLocation(Irp); PIO_STACK_LOCATION nextIrpStack = IoGetNextIrpStackLocation(Irp); ULONG transferByteCount = currentIrpStack->Parameters.Read.Length; LARGE_INTEGER startingOffset = currentIrpStack->Parameters.Read.ByteOffset; PVOID dataBuffer = MmGetMdlVirtualAddress(Irp->MdlAddress); ULONG dataLength = MaximumBytes; ULONG irpCount = (transferByteCount + MaximumBytes - 1) / MaximumBytes; PSCSI_REQUEST_BLOCK srb; ULONG i; NTSTATUS Status; DEBUGPRINT2(( "SplitRequest: Requires %d IRPs\n", irpCount)); DEBUGPRINT2(( "SplitRequest: Original IRP %p\n", Irp)); // // If all partial transfers complete successfully then the status and // bytes transferred are already set up. Failing a partial-transfer IRP // will set status to error and bytes transferred to 0 during // IoCompletion. Setting bytes transferred to 0 if an IRP fails allows // asynchronous partial transfers. This is an optimization for the // successful case. // Irp->IoStatus.Status = STATUS_SUCCESS; Irp->IoStatus.Information = transferByteCount; // // Save number of IRPs to complete count on current stack // of original IRP. // nextIrpStack->Parameters.Others.Argument1 = ULongToPtr( irpCount ); for (i = 0; i < irpCount; i++) { PIRP newIrp; PIO_STACK_LOCATION newIrpStack; // // Allocate new IRP. // newIrp = IoAllocateIrp(Fdo->StackSize, FALSE); if (newIrp == NULL) { DEBUGPRINT1(("SplitRequest: Can't allocate Irp\n")); // // If an Irp can't be allocated then the orginal request cannot // be executed. If this is the first request then just fail the // orginal request; otherwise just return. When the pending // requests complete, they will complete the original request. // In either case set the IRP status to failure. // Irp->IoStatus.Status = STATUS_INSUFFICIENT_RESOURCES; Irp->IoStatus.Information = 0; if (i == 0) { IoCompleteRequest (Irp, IO_NO_INCREMENT); } return; } DEBUGPRINT2(( "SplitRequest: New IRP %p\n", newIrp)); // // Write MDL address to new IRP. In the port driver the SRB data // buffer field is used as an offset into the MDL, so the same MDL // can be used for each partial transfer. This saves having to build // a new MDL for each partial transfer. // newIrp->MdlAddress = Irp->MdlAddress; // // At this point there is no current stack. IoSetNextIrpStackLocation // will make the first stack location the current stack so that the // SRB address can be written there. // IoSetNextIrpStackLocation(newIrp); newIrpStack = IoGetCurrentIrpStackLocation(newIrp); newIrpStack->MajorFunction = currentIrpStack->MajorFunction; newIrpStack->Parameters.Read.Length = dataLength; newIrpStack->Parameters.Read.ByteOffset = startingOffset; newIrpStack->DeviceObject = Fdo; // // Build SRB and CDB. // Status = BuildPrintRequest(Fdo, newIrp); if (!NT_SUCCESS (Status)) { IoFreeIrp (newIrp); Irp->IoStatus.Status = STATUS_INSUFFICIENT_RESOURCES; Irp->IoStatus.Information = 0; if (i == 0) { IoCompleteRequest (Irp, IO_NO_INCREMENT); } return; } // // Adjust SRB for this partial transfer. // newIrpStack = IoGetNextIrpStackLocation(newIrp); srb = newIrpStack->Parameters.Others.Argument1; srb->DataBuffer = dataBuffer; // // Write original IRP address to new IRP. // newIrp->AssociatedIrp.MasterIrp = Irp; // // Set the completion routine to ScsiClassIoCompleteAssociated. // IoSetCompletionRoutine(newIrp, ClassIoCompleteAssociated, srb, TRUE, TRUE, TRUE); // // Call port driver with new request. // IoCallDriver(deviceExtension->CommonExtension.LowerDeviceObject, newIrp); // // Set up for next request. // dataBuffer = (PCHAR)dataBuffer + MaximumBytes; transferByteCount -= MaximumBytes; if (transferByteCount > MaximumBytes) { dataLength = MaximumBytes; } else { dataLength = transferByteCount; } // // Adjust disk byte offset. // startingOffset.QuadPart = startingOffset.QuadPart + MaximumBytes; } return; } // end SplitRequest() NTSTATUS PrinterWriteComplete( IN PDEVICE_OBJECT Fdo, IN PIRP Irp, IN PVOID Context ) /*++ Routine Description: Ideally we should be should be able to use ClassIoComplete for all write completion notifications, but alas... (Code borrowed from classpnp!ClassIoComplete) This is the special, 1394 bus-specific write completion routine required to keep USBMON.DLL happy in the case of failed write requests. The other stacks that USBMON talks to all pend unsuccessful writes forever, rather than simply completing them with an error. When a write blocks for a long time USBMON will issue a sideband ioctl, namely IOCTL_USBPRINT_GET_LPT_STATUS, to determine if the printer is out of paper or not. Eventually USBMON may cancel a blocked write. However, it simply doesn't expect writes to just fail, so we have to fake out the behavior of the other stacks to keep it happy. We'll retry blocked writes every so often, & mark the irp as cancellable in between retries. At least USBMON will only send down one 10k (or so) write at a time, so we don't have to worry about queue-ing >1 write at a time for a device, nor do we have to deal with handling failed sub-requests of a split write. Arguments: Fdo - Supplies the device object which represents the logical unit. Irp - Supplies the Irp which has completed. Context - Supplies a pointer to the SRB. Return Value: NT status --*/ { ULONG retryInterval; KIRQL oldIrql; BOOLEAN retry; PIO_STACK_LOCATION irpStack = IoGetCurrentIrpStackLocation (Irp); PSCSI_REQUEST_BLOCK srb = Context; PCOMMON_DEVICE_EXTENSION extension = Fdo->DeviceExtension; NTSTATUS status; ASSERT(extension->IsFdo); if (extension->IsRemoved == NO_REMOVE){ if (SRB_STATUS(srb->SrbStatus) == SRB_STATUS_SUCCESS){ /* * Call ClassIoComplete to free the SRB, release the remove lock, and propagate the pending bit; * then let the irp continue completing. */ status = ClassIoComplete(Fdo, Irp, Context); } else { PPRINTER_DATA printerData = (PPRINTER_DATA)extension->DriverData; // // Note that ClassInterpretSenseInfo will return (retry=) // FALSE if it determines there's no media in device // retry = ClassInterpretSenseInfo( Fdo, srb, irpStack->MajorFunction, 0, MAXIMUM_RETRIES - ((ULONG)(ULONG_PTR) irpStack->Parameters.Others.Argument4), &printerData->LastWriteStatus, &retryInterval ); if (retry && ((ULONG)(ULONG_PTR)irpStack->Parameters.Others.Argument4)--){ PrinterRetryRequest (Fdo, Irp, srb); status = STATUS_MORE_PROCESSING_REQUIRED; } else { BOOLEAN queuedWriteIrp; if (printerData->LastWriteStatus == STATUS_NO_MEDIA_IN_DEVICE) { // // At the current time Epson is returning // SCSI_SENSEQ_MANUAL_INTERVENTION_REQUIRED for both // the out-of-paper & offline cases. The EndOfMedia // bit wil be set if the printer is truly out of paper, // but if it's not then we want to change the // LastWriteStatus so that we won't set the out-of-paper // bit in the IOCTL_USBPRINT_GET_LPT_STATUS handler. // PSENSE_DATA senseBuffer = srb->SenseInfoBuffer; if ((senseBuffer->AdditionalSenseCodeQualifier == SCSI_SENSEQ_MANUAL_INTERVENTION_REQUIRED) && !senseBuffer->EndOfMedia) { printerData->LastWriteStatus = STATUS_IO_DEVICE_ERROR; } } printerData->DueTime.HighPart = -1; printerData->DueTime.LowPart = BLOCKED_WRITE_TIMEOUT * (-10 * 1000 * 1000); queuedWriteIrp = SetWriteIrp(printerData, Irp, srb); if (queuedWriteIrp){ KeSetTimer(&printerData->Timer, printerData->DueTime, &printerData->TimerDpc); status = STATUS_MORE_PROCESSING_REQUIRED; } else { /* * There is already a WriteIrp set, so we have to complete this one. * Call ClassIoComplete to free the SRB, release the remove lock, and propagate the pending bit; * then let the irp continue completing. */ status = ClassIoComplete(Fdo, Irp, Context); } } } } else { /* * Call ClassIoComplete to free the SRB, release the remove lock, and propagate the pending bit; * then let the irp continue completing. */ Irp->IoStatus.Status = STATUS_DEVICE_DOES_NOT_EXIST; Irp->IoStatus.Information = 0; status = ClassIoComplete(Fdo, Irp, Context); } return status; } VOID PrinterRetryRequest( PDEVICE_OBJECT DeviceObject, PIRP Irp, PSCSI_REQUEST_BLOCK Srb ) /*++ Routine Description: (Code borrowed from classpnp!ClassIoComplete, since we need to set a different completion routine) This routine reinitalizes the necessary fields, and sends the request to the lower driver. Arguments: DeviceObject - Supplies the device object associated with this request. Irp - Supplies the request to be retried. Srb - Supplies a Pointer to the SCSI request block to be retied. Return Value: None --*/ { ULONG transferByteCount; PIO_STACK_LOCATION currentIrpStack = IoGetCurrentIrpStackLocation(Irp); PIO_STACK_LOCATION nextIrpStack = IoGetNextIrpStackLocation(Irp); PCOMMON_DEVICE_EXTENSION extension = DeviceObject->DeviceExtension; // // Determine the transfer count of the request. If this is a read or a // write then the transfer count is in the Irp stack. Otherwise assume // the MDL contains the correct length. If there is no MDL then the // transfer length must be zero. // if (currentIrpStack->MajorFunction == IRP_MJ_READ || currentIrpStack->MajorFunction == IRP_MJ_WRITE) { transferByteCount = currentIrpStack->Parameters.Read.Length; } else if (Irp->MdlAddress != NULL) { // // Note this assumes that only read and write requests are spilt and // other request do not need to be. If the data buffer address in // the MDL and the SRB don't match then transfer length is most // likely incorrect. // ASSERT(Srb->DataBuffer == MmGetMdlVirtualAddress(Irp->MdlAddress)); transferByteCount = Irp->MdlAddress->ByteCount; } else { transferByteCount = 0; } // // Reset byte count of transfer in SRB Extension. // Srb->DataTransferLength = transferByteCount; // // Zero SRB statuses. // Srb->SrbStatus = Srb->ScsiStatus = 0; // // Set the no disconnect flag, disable synchronous data transfers and // disable tagged queuing. This fixes some errors. // Srb->SrbFlags |= SRB_FLAGS_DISABLE_DISCONNECT | SRB_FLAGS_DISABLE_SYNCH_TRANSFER; Srb->SrbFlags &= ~SRB_FLAGS_QUEUE_ACTION_ENABLE; Srb->QueueTag = SP_UNTAGGED; // // Set up major SCSI function. // nextIrpStack->MajorFunction = IRP_MJ_SCSI; // // Save SRB address in next stack for port driver. // nextIrpStack->Parameters.Scsi.Srb = Srb; // // Set up IoCompletion routine address. // IoSetCompletionRoutine (Irp, PrinterWriteComplete, Srb, TRUE, TRUE, TRUE); // // Pass the request to the port driver. // IoCallDriver (extension->LowerDeviceObject, Irp); return; } // end PrinterRetryRequest() VOID PrinterWriteTimeoutDpc( IN PKDPC Dpc, IN PVOID Context, IN PVOID SystemArgument1, IN PVOID SystemArgument2 ) /*++ Routine Description: Gets called when the blocking-write timer expires. Allocates & queues a low-priority work item (to resubmit the write) if there's an outstanding write, & if the allocation fails justs resets the time to try again later. (We're running at raised irql here, when it's not necesarily safe to re-submit the write, hence the work item which gets processed later at passive level.) Arguments: Dpc - Extension - SystemArgument1 - SystemArgument2 - Return Value: None --*/ { PFUNCTIONAL_DEVICE_EXTENSION fdoExtension = Context; PCOMMON_DEVICE_EXTENSION commonExtension = &fdoExtension->CommonExtension; PPRINTER_DATA printerData = commonExtension->DriverData; PIRP writeIrp; PSCSI_REQUEST_BLOCK srb; if (commonExtension->IsRemoved == NO_REMOVE){ if (printerData->WriteIrp){ PIO_WORKITEM workItem; workItem = IoAllocateWorkItem(commonExtension->DeviceObject); if (workItem) { IoQueueWorkItem(workItem, PrinterResubmitWrite, DelayedWorkQueue, workItem); } else { writeIrp = GetWriteIrp(printerData, &srb); if (writeIrp){ ExFreePool(srb); writeIrp->IoStatus.Status = STATUS_INSUFFICIENT_RESOURCES; writeIrp->IoStatus.Information = 0; ClassReleaseRemoveLock(commonExtension->DeviceObject, writeIrp); if (writeIrp->PendingReturned){ IoMarkIrpPending(writeIrp); } IoCompleteRequest(writeIrp, IO_NO_INCREMENT); } } } } else { /* * We're being removed. Don't issue the workItem. * If we have a queued writeIrp, complete the irp and free the srb. */ writeIrp = GetWriteIrp(printerData, &srb); if (writeIrp){ ExFreePool(srb); writeIrp->IoStatus.Status = STATUS_DEVICE_DOES_NOT_EXIST; writeIrp->IoStatus.Information = 0; ClassReleaseRemoveLock(commonExtension->DeviceObject, writeIrp); if (writeIrp->PendingReturned){ IoMarkIrpPending(writeIrp); } IoCompleteRequest(writeIrp, IO_NO_INCREMENT); } } } VOID PrinterResubmitWrite( PDEVICE_OBJECT DeviceObject, PVOID Context ) /*++ Routine Description: Work item handler routine, gets called at passive level in an arbitrary thread context. Simply resubmits an outstanding write, if any. Arguments: DeviceObject - Context - pointer to the IO_WORKITEM Return Value: None --*/ { PCOMMON_DEVICE_EXTENSION commonExtension = DeviceObject->DeviceExtension; PPRINTER_DATA printerData = (PPRINTER_DATA)commonExtension->DriverData; PIRP writeIrp; PSCSI_REQUEST_BLOCK srb; IoFreeWorkItem ((PIO_WORKITEM)Context); writeIrp = GetWriteIrp(printerData, &srb); if (writeIrp){ ExFreePool(srb); if (commonExtension->IsRemoved == NO_REMOVE){ PrinterReadWrite(DeviceObject, writeIrp); } else { writeIrp->IoStatus.Status = STATUS_DEVICE_DOES_NOT_EXIST; writeIrp->IoStatus.Information = 0; ClassReleaseRemoveLock(DeviceObject, writeIrp); if (writeIrp->PendingReturned){ IoMarkIrpPending(writeIrp); } IoCompleteRequest(writeIrp, IO_NO_INCREMENT); } } } // end PrinterWriteTimeoutDpc BOOLEAN SetWriteIrp(PPRINTER_DATA PrinterData, PIRP WriteIrp, PSCSI_REQUEST_BLOCK Srb) { BOOLEAN didSet; KIRQL oldIrql; KeAcquireSpinLock(&PrinterData->SplitRequestSpinLock, &oldIrql); if (!PrinterData->WriteIrp){ /* * This is not perfect irp queuing with cancellation, * but it works here since the irp will not be cancelled before we receive it. * Since we're queuing the irp, it may complete on a different thread than it was issues on; so set the pending bit. */ ASSERT(!PrinterData->WriteSrb); IoMarkIrpPending(WriteIrp); PrinterData->WriteIrp = WriteIrp; PrinterData->WriteSrb = Srb; didSet = TRUE; } else if (PrinterData->WriteIrp == WriteIrp){ /* * This can happen on retry (??) */ ASSERT(PrinterData->WriteSrb == Srb); didSet = TRUE; } else { didSet = FALSE; } KeReleaseSpinLock(&PrinterData->SplitRequestSpinLock, oldIrql); return didSet; } PIRP GetWriteIrp(PPRINTER_DATA PrinterData, PSCSI_REQUEST_BLOCK *Srb) { PIRP writeIrp; KIRQL oldIrql; KeAcquireSpinLock(&PrinterData->SplitRequestSpinLock, &oldIrql); if (PrinterData->WriteIrp){ writeIrp = PrinterData->WriteIrp; PrinterData->WriteIrp = NULL; ASSERT(PrinterData->WriteSrb); *Srb = PrinterData->WriteSrb; PrinterData->WriteSrb = NULL; } else { writeIrp = NULL; ASSERT(!PrinterData->WriteSrb); *Srb = NULL; } KeReleaseSpinLock(&PrinterData->SplitRequestSpinLock, oldIrql); return writeIrp; }