/*++ Copyright (c) 1996 Microsoft Corporation Module Name: usbhub.h Abstract: This header define structures and macros for USB Hub driver. Author: JohnLee Environment: Kernel mode Revision History: 2-2-96 : created 11-18-96 : jdunn -- added composite device support --*/ #include #include // usbdi.h has been replaced by usb.h #include #include // contains internal definitions for MS OS Desc. #ifdef USB2 #include "hubbusif.h" // hub service bus interface #include "usbbusif.h" // usb client service bus interface #else #include #include #endif #include #include #include //enable pageable code #ifndef PAGE_CODE #define PAGE_CODE #endif #define MULTI_FUNCTION_SUPPORT #define EARLY_RESOURCE_RELEASE #define USBH_MAX_FUNCTION_INTERFACES 4 #define BcdNibbleToAscii( byte ) (byte)+ '0' // // fail reason codes // // "Device Failed Enumeration" // indicates the device failed some part of the enumeration process // when this happens we cannot tell enough about the device to load // the appropriate driver. #define USBH_FAILREASON_ENUM_FAILED 1 // "Device General Failure" // this is our 'if it does not fit any other catagory' error #define USBH_FAILREASON_GEN_DEVICE_FAILURE 2 // "Device Caused Overcurrent" // if a hub supports per port power switching and the device // causes an overcurrent condition (over-current is like blowing // a fuse) the we report this error. #define USBH_FAILREASON_PORT_OVERCURRENT 3 // "Not Enough Power" // indicates that the device requested a configuration that requires // more power than the hub can provide. #define USBH_FAILREASON_NOT_ENOUGH_POWER 4 // "Hub General failure" // if the hub starts failing transfer requests the driver will // disable it and report this error. #define USBH_FAILREASON_HUB_GENERAL_FAILURE 5 // "Cannot connect more than five hubs" #define USBH_FAILREASON_MAXHUBS_CONNECTED 6 // "An overcurrent condition has disabled the hub" // if a device generates overcurrent and the hub implements // gang power switching the entire hub will be disabled and // this error reported. #define USBH_FAILREASON_HUB_OVERCURRENT 7 // // Struc definitions // // // Work item // #define USBH_WKFLAG_REQUEST_RESET 0x00000001 typedef struct _USBH_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; ULONG Flags; PVOID Context; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; KDPC Dpc; KTIMER Timer; UCHAR Data[0]; } USBH_WORK_ITEM, *PUSBH_WORK_ITEM; typedef struct _USBH_RESET_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort; PIRP Irp; } USBH_RESET_WORK_ITEM, *PUSBH_RESET_WORK_ITEM; typedef struct _USBH_COMP_RESET_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_PARENT *DeviceExtensionParent; } USBH_COMP_RESET_WORK_ITEM, *PUSBH_COMP_RESET_WORK_ITEM; typedef struct _USBH_BANDWIDTH_TIMEOUT_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort; } USBH_BANDWIDTH_TIMEOUT_WORK_ITEM, *PUSBH_BANDWIDTH_TIMEOUT_WORK_ITEM; typedef struct _USBH_COMP_RESET_TIMEOUT_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_PARENT *DeviceExtensionParent; } USBH_COMP_RESET_TIMEOUT_WORK_ITEM, *PUSBH_COMP_RESET_TIMEOUT_WORK_ITEM; typedef struct _USBH_SET_POWER_D0_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; PIRP Irp; } USBH_SET_POWER_D0_WORK_ITEM, *PUSBH_SET_POWER_D0_WORK_ITEM; typedef struct _USBH_HUB_ESD_RECOVERY_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; } USBH_HUB_ESD_RECOVERY_WORK_ITEM, *PUSBH_HUB_ESD_RECOVERY_WORK_ITEM; typedef struct _USBH_HUB_IDLE_POWER_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; NTSTATUS ntStatus; } USBH_HUB_IDLE_POWER_WORK_ITEM, *PUSBH_HUB_IDLE_POWER_WORK_ITEM; typedef struct _USBH_PORT_IDLE_POWER_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; PIRP Irp; } USBH_PORT_IDLE_POWER_WORK_ITEM, *PUSBH_PORT_IDLE_POWER_WORK_ITEM; typedef struct _USBH_COMPLETE_PORT_IRPS_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; LIST_ENTRY IrpsToComplete; NTSTATUS ntStatus; } USBH_COMPLETE_PORT_IRPS_WORK_ITEM, *PUSBH_COMPLETE_PORT_IRPS_WORK_ITEM; typedef struct _USBH_HUB_ASYNC_POWER_WORK_ITEM { WORK_QUEUE_ITEM WorkQueueItem; struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort; PIRP Irp; UCHAR MinorFunction; } USBH_HUB_ASYNC_POWER_WORK_ITEM, *PUSBH_HUB_ASYNC_POWER_WORK_ITEM; typedef struct _HUB_TIMEOUT_CONTEXT { PIRP Irp; KEVENT Event; KDPC TimeoutDpc; KTIMER TimeoutTimer; KSPIN_LOCK TimeoutSpin; BOOLEAN Complete; } HUB_TIMEOUT_CONTEXT, *PHUB_TIMEOUT_CONTEXT; typedef struct _PORT_TIMEOUT_CONTEXT { KDPC TimeoutDpc; KTIMER TimeoutTimer; struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort; BOOLEAN CancelFlag; } PORT_TIMEOUT_CONTEXT, *PPORT_TIMEOUT_CONTEXT; typedef struct _COMP_RESET_TIMEOUT_CONTEXT { KDPC TimeoutDpc; KTIMER TimeoutTimer; struct _DEVICE_EXTENSION_PARENT *DeviceExtensionParent; BOOLEAN CancelFlag; } COMP_RESET_TIMEOUT_CONTEXT, *PCOMP_RESET_TIMEOUT_CONTEXT; typedef struct _HUB_ESD_RECOVERY_CONTEXT { KDPC TimeoutDpc; KTIMER TimeoutTimer; struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub; } HUB_ESD_RECOVERY_CONTEXT, *PHUB_ESD_RECOVERY_CONTEXT; typedef struct _USB_DEVICE_UI_FIRMWARE_REVISION { USHORT Length; WCHAR FirmwareRevisionString[1]; } USB_DEVICE_UI_FIRMWARE_REVISION, *PUSB_DEVICE_UI_FIRMWARE_REVISION; typedef struct _HUB_STATE { USHORT HubStatus; USHORT HubChange; } HUB_STATE, *PHUB_STATE; typedef struct _PORT_STATE { USHORT PortStatus; USHORT PortChange; } PORT_STATE, *PPORT_STATE; // // Hub and Port status defined below also apply to StatusChnage bits // #define HUB_STATUS_LOCAL_POWER 0x01 #define HUB_STATUS_OVER_CURRENT 0x02 #define PORT_STATUS_CONNECT 0x001 #define PORT_STATUS_ENABLE 0x002 #define PORT_STATUS_SUSPEND 0x004 #define PORT_STATUS_OVER_CURRENT 0x008 #define PORT_STATUS_RESET 0x010 #define PORT_STATUS_POWER 0x100 #define PORT_STATUS_LOW_SPEED 0x200 #define PORT_STATUS_HIGH_SPEED 0x400 // // Port data to describe relevant info about a port // // values for PortFlags // #define PORTFLAG_ 0x00000001 typedef struct _PORT_DATA { PORT_STATE PortState; // the status & change bit mask of the port PDEVICE_OBJECT DeviceObject; // the PDO USB_CONNECTION_STATUS ConnectionStatus; // extended port attributes as defined in USB.H ULONG PortAttributes; // revised port data structure ULONG PortFlags; } PORT_DATA, *PPORT_DATA; // // Define the various device type values. Note that values used by Microsoft // Corporation are in the range 0-32767, and 32768-65535 are reserved for use // by customers. // #define FILE_DEVICE_USB_HUB 0x00008600 #define USBH_MAX_ENUMERATION_ATTEMPTS 3 // // Common fields for Pdo and Fdo extensions // #define EXTENSION_TYPE_PORT 0x54524f50 // "PORT" #define EXTENSION_TYPE_HUB 0x20425548 // "HUB " #define EXTENSION_TYPE_PARENT 0x50525400 // "PRT " #define EXTENSION_TYPE_FUNCTION 0xfefefeff // "" typedef struct _USBH_POWER_WORKER { PIRP Irp; WORK_QUEUE_ITEM WorkQueueItem; } USBH_POWER_WORKER, *PUSBH_POWER_WORKER; typedef struct _DEVICE_EXTENSION_HEADER { ULONG ExtensionType; } DEVICE_EXTENSION_HEADER, *PDEVICE_EXTENSION_HEADER; typedef struct _DEVICE_EXTENSION_COMMON { PDEVICE_OBJECT FunctionalDeviceObject; // points back to owner device object PDEVICE_OBJECT PhysicalDeviceObject; // the PDO for this device PDEVICE_OBJECT TopOfStackDeviceObject; // to of stack passed to adddevice } DEVICE_EXTENSION_COMMON, *PDEVICE_EXTENSION_COMMON; // common to FDO for hub and generic parent typedef struct _DEVICE_EXTENSION_FDO { DEVICE_EXTENSION_HEADER; DEVICE_EXTENSION_COMMON; KEVENT PnpStartEvent; PIRP PowerIrp; #ifdef WMI_SUPPORT WMILIB_CONTEXT WmiLibInfo; #endif /* WMI_SUPPORT */ } DEVICE_EXTENSION_FDO, *PDEVICE_EXTENSION_FDO; // // Device_Extension for HUB // typedef struct _DEVICE_EXTENSION_HUB { // // *** NOTE the first four fields must match // DEVICE_EXTENSION_FDO // DEVICE_EXTENSION_HEADER; DEVICE_EXTENSION_COMMON; KEVENT PnpStartEvent; PIRP PowerIrp; #ifdef WMI_SUPPORT WMILIB_CONTEXT WmiLibInfo; #endif /* WMI_SUPPORT */ // // Pdo created by HCD for the root hub // PDEVICE_OBJECT RootHubPdo; // // top of the host controller stack // typically this is the FDO for the HCD // PDEVICE_OBJECT TopOfHcdStackDeviceObject; ULONG HubFlags; // // we use the hub mutex to serialize access to the // hub ports between ioctls and pnp events // ULONG PendingRequestCount; ULONG ErrorCount; HUB_STATE HubState; PIRP Irp; PIRP PendingWakeIrp; LONG NumberPortWakeIrps; PUCHAR TransferBuffer; ULONG TransferBufferLength; PKEVENT Event; PUSB_HUB_DESCRIPTOR HubDescriptor; PPORT_DATA PortData; USBD_CONFIGURATION_HANDLE Configuration; PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor; DEVICE_POWER_STATE DeviceState[PowerSystemMaximum]; SYSTEM_POWER_STATE SystemWake; DEVICE_POWER_STATE DeviceWake; DEVICE_POWER_STATE CurrentPowerState; LONG MaximumPowerPerPort; PORT_STATE PortStateBuffer; LONG ResetPortNumber; PUSBH_WORK_ITEM WorkItemToQueue; KEVENT AbortEvent; KEVENT PendingRequestEvent; // // we use the hub mutex to serialize access to the // hub ports between ioctls and pnp events // KSEMAPHORE HubMutex; KSEMAPHORE HubPortResetMutex; KSEMAPHORE ResetDeviceMutex; USB_DEVICE_DESCRIPTOR DeviceDescriptor; USBD_PIPE_INFORMATION PipeInformation; URB Urb; LONG InESDRecovery; #ifdef USB2 USB_BUS_INTERFACE_HUB_V5 BusIf; USB_BUS_INTERFACE_USBDI_V2 UsbdiBusIf; #endif PIRP PendingIdleIrp; USB_IDLE_CALLBACK_INFO IdleCallbackInfo; KEVENT SubmitIdleEvent; LONG ChangeIndicationWorkitemPending; LONG WaitWakeIrpCancelFlag; LONG IdleIrpCancelFlag; KEVENT CWKEvent; // Only used for the Root Hub! SYSTEM_POWER_STATE CurrentSystemPowerState; KSPIN_LOCK CheckIdleSpinLock; // revised extension // deleted Pdo list, we use this list to handle // async deletion of PDOs. Basically these are // PDO we have not reported gone to PnP yet. LIST_ENTRY DeletePdoList; } DEVICE_EXTENSION_HUB, *PDEVICE_EXTENSION_HUB; #define HUBFLAG_NEED_CLEANUP 0x00000001 #define HUBFLAG_ENABLED_FOR_WAKEUP 0x00000002 #define HUBFLAG_DEVICE_STOPPING 0x00000004 #define HUBFLAG_HUB_FAILURE 0x00000008 #define HUBFLAG_SUPPORT_WAKEUP 0x00000010 #define HUBFLAG_HUB_STOPPED 0x00000020 #define HUBFLAG_HUB_BUSY 0x00000040 #define HUBFLAG_PENDING_WAKE_IRP 0x00000080 #define HUBFLAG_PENDING_PORT_RESET 0x00000100 #define HUBFLAG_HUB_HAS_LOST_BRAINS 0x00000200 #define HUBFLAG_SET_D0_PENDING 0x00000400 #define HUBFLAG_DEVICE_LOW_POWER 0x00000800 #define HUBFLAG_PENDING_IDLE_IRP 0x00001000 #define HUBFLAG_CHILD_DELETES_PENDING 0x00002000 #define HUBFLAG_HUB_GONE 0x00004000 #define HUBFLAG_USB20_HUB 0x00008000 #define HUBFLAG_NEED_IDLE_CHECK 0x00010000 #define HUBFLAG_WW_SET_D0_PENDING 0x00020000 #define HUBFLAG_USB20_MULTI_TT 0x00040000 #define HUBFLAG_POST_ESD_ENUM_PENDING 0x00080000 #define HUBFLAG_OK_TO_ENUMERATE 0x00100000 #define HUBFLAG_IN_IDLE_CHECK 0x00200000 #define HUBFLAG_HIBER 0x00400000 typedef struct _DEVICE_EXTENSION_PARENT { DEVICE_EXTENSION_HEADER; DEVICE_EXTENSION_COMMON; KEVENT PnpStartEvent; PIRP PowerIrp; #ifdef WMI_SUPPORT WMILIB_CONTEXT WmiLibInfo; #endif /* WMI_SUPPORT */ PIRP PendingWakeIrp; LONG NumberFunctionWakeIrps; ULONG FunctionCount; PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor; SINGLE_LIST_ENTRY FunctionList; DEVICE_POWER_STATE DeviceState[PowerSystemMaximum]; SYSTEM_POWER_STATE SystemWake; DEVICE_POWER_STATE DeviceWake; DEVICE_POWER_STATE CurrentPowerState; ULONG ParentFlags; BOOLEAN NeedCleanup; UCHAR CurrentConfig; UCHAR Reserved[2]; USB_DEVICE_DESCRIPTOR DeviceDescriptor; PCOMP_RESET_TIMEOUT_CONTEXT CompResetTimeoutContext; KSEMAPHORE ParentMutex; KSPIN_LOCK ParentSpinLock; } DEVICE_EXTENSION_PARENT, *PDEVICE_EXTENSION_PARENT; typedef struct _FUNCTION_INTERFACE { PUSBD_INTERFACE_INFORMATION InterfaceInformation; PUSB_INTERFACE_DESCRIPTOR InterfaceDescriptor; ULONG InterfaceDescriptorLength; } FUNCTION_INTERFACE, *PFUNCTION_INTERFACE; typedef struct _DEVICE_EXTENSION_FUNCTION { DEVICE_EXTENSION_HEADER; PDEVICE_EXTENSION_PARENT DeviceExtensionParent; PDEVICE_OBJECT FunctionPhysicalDeviceObject; PIRP WaitWakeIrp; PIRP ResetIrp; ULONG InterfaceCount; ULONG FunctionPdoFlags; SINGLE_LIST_ENTRY ListEntry; USBD_CONFIGURATION_HANDLE ConfigurationHandle; WCHAR UniqueIdString[4]; // room for three unicode digits plus // NULL FUNCTION_INTERFACE FunctionInterfaceList[USBH_MAX_FUNCTION_INTERFACES]; } DEVICE_EXTENSION_FUNCTION, *PDEVICE_EXTENSION_FUNCTION; // // Device Extension for Port // typedef struct _DEVICE_EXTENSION_PORT { DEVICE_EXTENSION_HEADER; PDEVICE_OBJECT PortPhysicalDeviceObject; PDEVICE_EXTENSION_HUB DeviceExtensionHub; USHORT PortNumber; // port you are on on your parent hub. USHORT SerialNumberBufferLength; PVOID DeviceData; DEVICE_POWER_STATE DeviceState; PIRP WaitWakeIrp; // these flags describe the state of the PDO and // the capabilities of the device connected ULONG PortPdoFlags; ULONG DeviceHackFlags; PWCHAR SerialNumberBuffer; WCHAR UniqueIdString[4]; // room for three unicode digits plus NULL UNICODE_STRING SymbolicLinkName; USB_DEVICE_DESCRIPTOR DeviceDescriptor; USB_DEVICE_DESCRIPTOR OldDeviceDescriptor; USB_CONFIGURATION_DESCRIPTOR ConfigDescriptor; USB_INTERFACE_DESCRIPTOR InterfaceDescriptor; // information returned through WMI // ULONG FailReasonId; ULONG PowerRequested; ULONG RequestedBandwidth; ULONG EnumerationFailReason; PPORT_TIMEOUT_CONTEXT PortTimeoutContext; UCHAR FeatureDescVendorCode; PIRP IdleNotificationIrp; KSPIN_LOCK PortSpinLock; DEVICE_CAPABILITIES DevCaps; PDEVICE_EXTENSION_HUB HubExtSave; #ifdef WMI_SUPPORT WMILIB_CONTEXT WmiLibInfo; #endif /* WMI_SUPPORT */ // revised extension // Storage for MS Extended Config Descriptor Compatible IDs UCHAR CompatibleID[8]; UCHAR SubCompatibleID[8]; ULONG PnPFlags; LIST_ENTRY DeletePdoLink; } DEVICE_EXTENSION_PORT, *PDEVICE_EXTENSION_PORT; // values for PNP flags // #define PDO_PNPFLAG_ #define PDO_PNPFLAG_DEVICE_PRESENT 0x00000001 typedef struct _SERIAL_NUMBER_ENTRY { ULONG Vid; ULONG Pid; PVOID Pdo; } SERIAL_NUMBER_ENTRY, *PSERIAL_NUMBER_ENTRY; typedef struct _SERIAL_NUMBER_TABLE { ULONG NumEntries; ULONG MaxEntries; PSERIAL_NUMBER_ENTRY Entries; FAST_MUTEX Mutex; } SERIAL_NUMBER_TABLE, * PSERIAL_NUMBER_TABLE; // // values for PortPdoFlags // #define PORTPDO_DEVICE_IS_HUB 0x00000001 #define PORTPDO_DEVICE_IS_PARENT 0x00000002 #define PORTPDO_DEVICE_ENUM_ERROR 0x00000004 #define PORTPDO_LOW_SPEED_DEVICE 0x00000008 #define PORTPDO_REMOTE_WAKEUP_SUPPORTED 0x00000010 #define PORTPDO_REMOTE_WAKEUP_ENABLED 0x00000020 #define PORTPDO_DELETED_PDO 0x00000040 // revised // set when the device for a PDO is removed from bus // (physically detached from hub) // PnP may or may not know the device is gone. #define PORTPDO_DELETE_PENDING 0x00000080 #define PORTPDO_NEED_RESET 0x00000100 #define PORTPDO_STARTED 0x00000200 #define PORTPDO_USB20_DEVICE_IN_LEGACY_HUB 0x00000400 #define PORTPDO_SYM_LINK 0x00000800 #define PORTPDO_DEVICE_FAILED 0x00001000 #define PORTPDO_USB_SUSPEND 0x00002000 #define PORTPDO_OVERCURRENT 0x00004000 #define PORTPDO_DD_REMOVED 0x00008000 #define PORTPDO_NOT_ENOUGH_POWER 0x00010000 // revised not used //#define PORTPDO_PDO_RETURNED 0x00020000 #define PORTPDO_NO_BANDWIDTH 0x00040000 #define PORTPDO_RESET_PENDING 0x00080000 #define PORTPDO_OS_STRING_DESC_REQUESTED 0x00100000 #define PORTPDO_MS_VENDOR_CODE_VALID 0x00200000 #define PORTPDO_IDLE_NOTIFIED 0x00400000 #define PORTPDO_HIGH_SPEED_DEVICE 0x00800000 #define PORTPDO_NEED_CLEAR_REMOTE_WAKEUP 0x01000000 #define PORTPDO_WMI_REGISTERED 0x02000000 #define PORTPDO_VALID_FOR_PNP_FUNCTION 0x04000000 #define PORTPDO_CYCLED 0x08000000 // // NOTE: this macro will alway inavlidate the device state but // never change the current "fail reason" #define HUB_FAILURE(de) \ { \ de->HubFlags |= HUBFLAG_HUB_FAILURE; \ USBH_KdPrint((1, "'hub failure, VID %x PID %x line %d file %s\n", \ de->DeviceDescriptor.idVendor, \ de->DeviceDescriptor.idProduct, __LINE__, __FILE__)); \ LOGENTRY(LOG_PNP, "HUB!", de, __LINE__, de->HubFlags); \ } //#define DEVICE_FAILURE(dep) \ // { \ // dep->PortPdoFlags |= PORTPDO_DEVICE_FAILED; \ // USBH_KdPrint((1, "'device failure, VID %x PID %x line %d file %s\n", \ // dep->DeviceDescriptor.idVendor, \ // dep->DeviceDescriptor.idProduct,\ // __LINE__, __FILE__)); \ // LOGENTRY(LOG_PNP, "DEV!", dep, 0, 0); \ // } #define IS_ROOT_HUB(de) (de->PhysicalDeviceObject == de->RootHubPdo) #define USBH_IoInvalidateDeviceRelations(devobj, b) \ { \ LOGENTRY(LOG_PNP, "HUBr", devobj, 0, 0); \ USBH_KdPrint((1, "'IoInvalidateDeviceRelations %x\n", devobj));\ IoInvalidateDeviceRelations(devobj, b); \ } // // Length of buffer for Hub and port status are both 4 // #define STATUS_HUB_OR_PORT_LENGTH 4 // // Hub Characterics // // // Powere switch mode // #define HUB_CHARS_POWER_SWITCH_MODE_MASK 0x0003 #define HUB_CHARS_POWER_SWITCH_GANGED 0x0000 //00 #define HUB_CHARS_POWER_SWITCH_INDIVIDUAL 0x0001 //01 #define HUB_CHARS_POWER_SWITCH_NONE 0x0002 //1X #define HUB_IS_GANG_POWER_SWITCHED(hc) \ (((hc) & HUB_CHARS_POWER_SWITCH_MODE_MASK) == HUB_CHARS_POWER_SWITCH_GANGED) #define HUB_IS_NOT_POWER_SWITCHED(hc) \ (((hc) & HUB_CHARS_POWER_SWITCH_NONE) == HUB_CHARS_POWER_SWITCH_NONE) #define HUB_IS_PORT_POWER_SWITCHED(hc) \ (((hc) & HUB_CHARS_POWER_SWITCH_MODE_MASK) == HUB_CHARS_POWER_SWITCH_INDIVIDUAL) BOOLEAN IsBitSet( PVOID Bitmap, ULONG PortNumber ); #define PORT_ALWAYS_POWER_SWITCHED(hd, p) \ IsBitSet(&(hd)->bRemoveAndPowerMask[((hd)->bNumberOfPorts)/8 + 1], \ (p)) #define PORT_DEVICE_NOT_REMOVABLE(hd, p) \ IsBitSet(&(hd)->bRemoveAndPowerMask[0], \ (p)) // // Compound Device // #define HUB_CHARS_COMPOUND_DEVICE 0x4 // // Over Current Protection Mode // #define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_MASK 0x18 #define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_GLOBAL 0x0 #define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_INDIVIDUAL 0x8 #define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_NONE 0x10 // // Request codes, defined in Ch11 // #define REQUEST_GET_STATUS 0 #define REQUEST_CLEAR_FEATURE 1 #define REQUEST_GET_STATE 2 #define REQUEST_SET_FEATURE 3 #define REQUEST_SET_ADDRESS 5 #define REQUEST_GET_DESCRIPTOR 6 #define REQUEST_SET_DESCRIPTOR 7 #define REQUEST_GET_CONFIGURATION 8 #define REQUEST_SET_CONFIGURATION 9 #define REQUEST_GET_INTERFACE 10 #define REQUEST_SET_INTERFACE 11 #define REQUEST_SYNCH_FRAME 12 // // These request types can be composed. // But it is just easy to define them. // #define REQUEST_TYPE_CLEAR_HUB_FEATURE 0x20 #define REQUEST_TYPE_CLEAR_PORT_FEATURE 0x23 #define REQUEST_TYPE_GET_BUS_STATE 0xa3 #define REQUEST_TYPE_GET_HUB_DESCRIPTOR 0xa0 #define REQUEST_TYPE_GET_HUB_STATUS 0xa0 #define REQUEST_TYPE_GET_PORT_STATUS 0xa3 #define REQUEST_TYPE_SET_HUB_DESCRIPTOR 0x20 #define REQUEST_TYPE_SET_HUB_FEATURE 0x20 #define REQUEST_TYPE_SET_PORT_FEATURE 0x23 // // Feature selector, defined in Ch11 // #define FEATURE_C_HUB_LOCAL_POWER 0 #define FEATURE_C_HUB_OVER_CURRENT 1 #define FEATURE_PORT_CONNECT 0 #define FEATURE_PORT_ENABLE 1 #define FEATURE_PORT_SUSPEND 2 #define FEATURE_PORT_OVER_CURRENT 3 #define FEATURE_PORT_RESET 4 #define FEATURE_PORT_POWER 8 #define FEATURE_PORT_LOW_SPEED 9 #define FEATURE_C_PORT_CONNECT 16 #define FEATURE_C_PORT_ENABLE 17 #define FEATURE_C_PORT_SUSPEND 18 #define FEATURE_C_PORT_OVER_CURRENT 19 #define FEATURE_C_PORT_RESET 20 //---------------------------------------------------------------------------------- // Utility Macros #define UsbhBuildGetDescriptorUrb(\ pUrb, \ pDeviceData, \ bDescriptorType, \ bDescriptorIndex, \ wLanguageId, \ ulTransferLength, \ pTransferBuffer) \ {\ (pUrb)->UrbHeader.UsbdDeviceHandle = pDeviceData;\ (pUrb)->UrbHeader.Length = (USHORT) sizeof (struct _URB_CONTROL_DESCRIPTOR_REQUEST);\ (pUrb)->UrbHeader.Function = URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE;\ (pUrb)->UrbControlDescriptorRequest.DescriptorType = bDescriptorType;\ (pUrb)->UrbControlDescriptorRequest.Index = bDescriptorIndex;\ (pUrb)->UrbControlDescriptorRequest.LanguageId = wLanguageId;\ (pUrb)->UrbControlDescriptorRequest.TransferBufferLength = ulTransferLength;\ (pUrb)->UrbControlDescriptorRequest.TransferBuffer = pTransferBuffer;\ (pUrb)->UrbControlDescriptorRequest.TransferBufferMDL = NULL;\ (pUrb)->UrbControlVendorClassRequest.UrbLink = NULL;\ } #define UsbhBuildVendorClassUrb(\ pUrb,\ pDeviceData,\ wFunction,\ ulTransferFlags,\ bRequestType,\ bRequest,\ wFeatureSelector,\ wPort,\ ulTransferBufferLength,\ pTransferBuffer)\ {\ (pUrb)->UrbHeader.Length = (USHORT) sizeof( struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST);\ (pUrb)->UrbHeader.Function = wFunction;\ (pUrb)->UrbHeader.UsbdDeviceHandle = pDeviceData;\ (pUrb)->UrbControlVendorClassRequest.TransferFlags = ulTransferFlags;\ (pUrb)->UrbControlVendorClassRequest.TransferBufferLength = ulTransferBufferLength;\ (pUrb)->UrbControlVendorClassRequest.TransferBuffer = pTransferBuffer;\ (pUrb)->UrbControlVendorClassRequest.TransferBufferMDL = NULL;\ (pUrb)->UrbControlVendorClassRequest.RequestTypeReservedBits = bRequestType;\ (pUrb)->UrbControlVendorClassRequest.Request = bRequest;\ (pUrb)->UrbControlVendorClassRequest.Value = wFeatureSelector;\ (pUrb)->UrbControlVendorClassRequest.Index = wPort;\ (pUrb)->UrbControlVendorClassRequest.UrbLink = NULL;\ } //---------------------------------------------------------------------------------- // // string macros. these work with char and wide char strings // // Counting the byte count of an ascii string or wide char string // #define STRLEN( Length, p )\ {\ int i;\ for ( i=0; (p)[i]; i++ );\ Length = i*sizeof(*p);\ } // // copy wide char string // #define STRCPY( pDst, pSrc )\ {\ int nLength, i;\ STRLEN( nLength, pSrc );\ nLength /= sizeof( *pSrc );\ for ( i=0; i < nLength; i++ ) pDst[i] = pSrc[i];\ pDst[i] = 0;\ } // // concat (wide) char strings // #define STRCAT( pFirst, pSecond )\ {\ int j, k;\ int nLength;\ STRLEN( j, pFirst );\ STRLEN( nLength, pSecond );\ j /= sizeof( *pFirst );\ nLength /= sizeof( *pSecond);\ for ( k=0; k < nLength; k++, j++ ) pFirst[j] = pSecond[k];\ pFirst[j] = 0;\ } // // append a (wide) char, // #define APPEND( pString, ch )\ {\ int nLength;\ STRLEN( nLength, pString );\ nLength /= sizeof( *pString );\ pString[nLength] = ch;\ pString[nLength+1] = 0;\ } //---------------------------------------------------------------------------------- // // Debug Macros // #ifdef NTKERN // Win95 only #define DBGBREAK() _asm {int 3} #else #define DBGBREAK() DbgBreakPoint() #endif #define USBHUB_HEAP_TAG 0x42554855 //"UHUB" #define USBHUB_FREE_TAG 0x62756875 //"uhub" #if DBG PVOID UsbhGetHeap( IN POOL_TYPE PoolType, IN ULONG NumberOfBytes, IN ULONG Signature, IN PLONG TotalAllocatedHeapSpace ); VOID UsbhRetHeap( IN PVOID P, IN ULONG Signature, IN PLONG TotalAllocatedHeapSpace ); // TEST_TRAP() is a code coverage trap these should be removed // if you are able to 'g' past the OK // // KdTrap() breaks in the debugger on the debug build // these indicate bugs in client drivers, kernel apis or fatal error // conditions that should be debugged. also used to mark // code for features not implemented yet. // // KdBreak() breaks in the debugger when in MAX_DEBUG mode // ie debug trace info is turned on, these are intended to help // debug drivers devices and special conditions on the // bus. ULONG _cdecl USBH_KdPrintX( ULONG l, PCH Format, ... ); #define UsbhExAllocatePool(pt, l) UsbhGetHeap(pt, l, USBHUB_HEAP_TAG, \ &UsbhHeapCount) #define UsbhExFreePool(p) UsbhRetHeap(p, USBHUB_HEAP_TAG, &UsbhHeapCount) #define DBG_ONLY(s) s #define USBH_KdPrint(_s_) USBH_KdPrintX _s_ //#define USBH_KdPrintAlways(s) { DbgPrint( "USBH: "); \ // DbgPrint s; \ // } #ifdef MAX_DEBUG #define USBH_KdBreak(s) if (USBH_Debug_Trace_Level) { \ DbgPrint( "USBH: "); \ DbgPrint s; \ } \ DBGBREAK(); #else #define USBH_KdBreak(s) #endif /* MAX_DEBUG */ #define USBH_KdTrap(s) { DbgPrint( "USBH: ");\ DbgPrint s; \ DBGBREAK(); } #define TEST_TRAP() { DbgPrint( "USBH: Code coverage trap %s line: %d\n", __FILE__, __LINE__);\ DBGBREAK();} #else // not debug #define UsbhExAllocatePool(pt, l) ExAllocatePoolWithTag(pt, l, USBHUB_HEAP_TAG) #define UsbhExFreePool(p) ExFreePool(p) #define DBG_ONLY(s) #define USBH_KdPrint(_s_) #define USBH_KdBreak(s) #define USBH_KdTrap(s) //#define USBH_KdPrintAlways(s) #define TEST_TRAP(); #endif #ifdef HOST_GLOBALS #define DECLARE(type, var, init_value ) type var = init_value; #define DECLARE_NO_INIT(type, var) type var; #else #define DECLARE(type, var, init_value ) extern type var; #define DECLARE_NO_INIT(type, var ) extern type var; #endif //---------------------------------------------------------------------------------- // // Global Variables // // // Remember our driver object // DECLARE( PDRIVER_OBJECT, UsbhDriverObject, NULL) extern PWCHAR GenericUSBDeviceString; #if DBG // // keep track of heap allocations // DECLARE( ULONG, UsbhHeapCount, 0) #define PNP_TEST_FAIL_ENUM 0x00000001 #define PNP_TEST_FAIL_DEV_POWER 0x00000002 #define PNP_TEST_FAIL_HUB_COUNT 0x00000004 #define PNP_TEST_FAIL_HUB 0x00000008 #define PNP_TEST_FAIL_PORT_RESET 0x00000010 #define PNP_TEST_FAIL_WAKE_REQUEST 0x00000020 #define PNP_TEST_FAIL_RESTORE 0x00000040 DECLARE( ULONG, UsbhPnpTest, 0) #endif // // The following strings are used to build HardwareId etc. // // USB string // DECLARE( PWCHAR, pwchUsbSlash, L"USB\\"); // Vendor ID string // DECLARE( PWCHAR, pwchVid, L"Vid_"); // // Product Id string // DECLARE( PWCHAR, pwchPid, L"Pid_"); // // Revision string // DECLARE( PWCHAR, pwchRev, L"Rev_"); // // Device Class string // DECLARE( PWCHAR, pwchDevClass, L"DevClass_"); // // Class string // DECLARE( PWCHAR, pwchClass, L"Class_"); // // Composite // DECLARE( PWCHAR, pwchComposite, L"USB\\COMPOSITE"); // // SubClass string // DECLARE( PWCHAR, pwchSubClass, L"SubClass_"); // // MultiInterface string // DECLARE( PWCHAR, pwchMultiInterface, L"USB\\MI"); // // Device Protocol string // DECLARE( PWCHAR, pwchProt, L"Prot_"); DECLARE_NO_INIT( UNICODE_STRING, UsbhRegistryPath); // // To set the verbose level of the debug print // #ifdef MAX_DEBUG #define DEBUG3 #endif /* MAX_DEBUG */ #ifdef DEBUG3 DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 3)) #else #ifdef DEBUG2 DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 2)) #else #ifdef DEBUG1 DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 1)) #else DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 0)) #endif // DEBUG1 #endif // DEBUG2 #endif // DEBUG3 #define USBH_DEBUGFLAG_BREAK_PDO_START 0x00000001 DBG_ONLY( DECLARE( ULONG, USBH_Debug_Flags, 0)) #if DBG VOID UsbhWarning( PDEVICE_EXTENSION_PORT DeviceExtensionPort, PUCHAR Message, BOOLEAN DebugBreak ); #define ASSERT_HUB(de) USBH_ASSERT(EXTENSION_TYPE_HUB == ((PDEVICE_EXTENSION_HUB) de)->ExtensionType) #define ASSERT_PORT(de) USBH_ASSERT(EXTENSION_TYPE_PORT == ((PDEVICE_EXTENSION_PORT) de)->ExtensionType) #define ASSERT_FUNCTION(de) USBH_ASSERT(EXTENSION_TYPE_FUNCTION == ((PDEVICE_EXTENSION_FUNCTION) de)->ExtensionType) #else #define UsbhWarning(x, y, z) #define ASSERT_HUB(de) #define ASSERT_PORT(de) #define ASSERT_FUNCTION(de) #endif #define TO_USB_DEVICE 0 #define TO_USB_INTERFACE 1 #define TO_USB_ENDPOINT 2 // // maximum number of times we will attempt to reset // the hub before giving up // #define USBH_MAX_ERRORS 3 //---------------------------------------------------------------------------------- // // Function Prototypes // #ifdef USB2 VOID USBH_InitializeUSB2Hub( PDEVICE_EXTENSION_HUB DeviceExtensionHub ); // use version 5 #define PUSB_HUB_BUS_INTERFACE PUSB_BUS_INTERFACE_HUB_V5 #define HUB_BUSIF_VERSION USB_BUSIF_HUB_VERSION_5 NTSTATUS USBHUB_GetBusInterface( IN PDEVICE_OBJECT RootHubPdo, IN PUSB_HUB_BUS_INTERFACE BusInterface ); VOID USBHUB_SetDeviceHandleData( PDEVICE_EXTENSION_HUB DeviceExtensionHub, PDEVICE_OBJECT PdoDeviceObject, PVOID DeviceData ); NTSTATUS USBD_CreateDeviceEx( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN OUT PUSB_DEVICE_HANDLE *DeviceData, IN PDEVICE_OBJECT PdoDeviceObject, IN PDEVICE_OBJECT RootHubPdo, IN ULONG MaxPacketSize_Endpoint0, IN OUT PULONG DeviceHackFlags, IN USHORT PortStatus, IN USHORT PortNumber ); VOID USBHUB_FlushAllTransfers( PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBD_InitializeDeviceEx( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_DEVICE_HANDLE DeviceData, IN PDEVICE_OBJECT RootHubPdo, IN OUT PUSB_DEVICE_DESCRIPTOR DeviceDescriptor, IN ULONG DeviceDescriptorLength, IN OUT PUSB_CONFIGURATION_DESCRIPTOR ConfigDescriptor, IN ULONG ConfigDescriptorLength ); NTSTATUS USBD_RemoveDeviceEx( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_DEVICE_HANDLE DeviceData, IN PDEVICE_OBJECT RootHubPdo, IN ULONG Flags ); NTSTATUS USBD_GetDeviceInformationEx( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_NODE_CONNECTION_INFORMATION_EX DeviceInformation, IN ULONG DeviceInformationLength, IN PUSB_DEVICE_HANDLE DeviceData ); NTSTATUS USBD_MakePdoNameEx( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN OUT PUNICODE_STRING PdoNameUnicodeString, IN ULONG Index ); ULONG USBD_CalculateUsbBandwidthEx( IN ULONG MaxPacketSize, IN UCHAR EndpointType, IN BOOLEAN LowSpeed ); NTSTATUS USBD_RestoreDeviceEx( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN OUT PUSB_DEVICE_HANDLE OldDeviceData, IN OUT PUSB_DEVICE_HANDLE NewDeviceData, IN PDEVICE_OBJECT RootHubPdo ); NTSTATUS USBD_QuerySelectiveSuspendEnabled( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN OUT PBOOLEAN SelectiveSuspendEnabled ); NTSTATUS USBD_SetSelectiveSuspendEnabled( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN BOOLEAN SelectiveSuspendEnabled ); NTSTATUS USBHUB_GetRootHubName( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PVOID Buffer, IN PULONG BufferLength ); //ULONG //USBD_GetHackFlags( // IN PDEVICE_EXTENSION_HUB DeviceExtensionHub // ); #endif NTSTATUS USBH_SyncResetPort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber); NTSTATUS USBH_SyncResetDevice ( IN PDEVICE_OBJECT DeviceObject ); NTSTATUS USBH_SyncResumePort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber); NTSTATUS USBH_SyncSuspendPort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber); VOID USBH_ProcessHubStateChange( IN PHUB_STATE CurrentHubState, IN PDEVICE_EXTENSION_HUB DeviceExtensionHub); VOID USBH_ProcessPortStateChange( IN PPORT_STATE CurrentPortState, IN USHORT PortNumber, IN PDEVICE_EXTENSION_HUB DeviceExtensionHub); NTSTATUS USBH_SyncGetPortStatus( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber, OUT PUCHAR DataBuffer, IN ULONG DataBufferLength); NTSTATUS USBH_SyncClearPortStatus( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber, IN USHORT Feature); NTSTATUS USBH_SyncClearHubStatus( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT Feature); NTSTATUS USBH_SyncEnablePort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber); NTSTATUS USBH_SyncPowerOnPort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber, IN BOOLEAN WaitForPowerGood); NTSTATUS USBH_SyncPowerOffPort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber); NTSTATUS USBH_SyncPowerOnPorts( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub); NTSTATUS DriverEntry( IN PDRIVER_OBJECT DriverObject, IN PUNICODE_STRING UniRegistryPath); NTSTATUS USBH_HubDispatch( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp); VOID USBH_DriverUnload( IN PDRIVER_OBJECT DriverObject); VOID UsbhWait( ULONG MiliSeconds); NTSTATUS USBH_PdoDispatch( PDEVICE_EXTENSION_PORT pDeviceExtensionPort, PIRP pIrp); NTSTATUS USBH_SyncGetHubDescriptor( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub); NTSTATUS USBH_SyncGetDeviceConfigurationDescriptor( PDEVICE_OBJECT DeviceObject, PUCHAR DataBuffer, ULONG DataBufferLength, OUT PULONG BytesReturned); BOOLEAN USBH_ValidateSerialNumberString( PWCHAR DeviceId ); NTSTATUS USBH_CreateDevice( PDEVICE_EXTENSION_HUB DeviceExtensionHub, USHORT PortNumber, USHORT PortStatus, ULONG RetryIteration ); NTSTATUS USBH_FdoSyncSubmitUrb( PDEVICE_OBJECT HubDeviceObject, IN PURB Urb); NTSTATUS USBH_SyncGetRootHubPdo( IN PDEVICE_OBJECT DeviceObject, IN OUT PDEVICE_OBJECT *RootHubPdo, IN OUT PDEVICE_OBJECT *HcdDeviceObject, IN OUT PULONG Count ); NTSTATUS USBH_AddDevice( IN PDRIVER_OBJECT DriverObject, IN PDEVICE_OBJECT PhysicalDeviceObject); NTSTATUS USBH_FdoPnP( PDEVICE_EXTENSION_HUB DeviceExtensionHub, PIRP Irp, UCHAR MinorFunction); NTSTATUS USBH_FdoPower( PDEVICE_EXTENSION_HUB DeviceExtensionHub, PIRP Irp, UCHAR MinorFunction); NTSTATUS USBH_ChangeIndication( IN PDEVICE_OBJECT PNull, IN PIRP Irp, IN PVOID Context); VOID USBH_ChangeIndicationWorker( PVOID Context); NTSTATUS USBH_PassIrp( PIRP Irp, PDEVICE_OBJECT NextDeviceObject); VOID USBH_CompleteIrp( IN PIRP Irp, IN NTSTATUS NtStatus); NTSTATUS USBH_SyncDisablePort( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber); NTSTATUS USBH_SyncGetHubStatus( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, OUT PUCHAR DataBuffer, IN ULONG DataBufferLength); NTSTATUS USBH_FdoHubStartDevice( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp); NTSTATUS USBH_ParentFdoStartDevice( IN OUT PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN PIRP Irp, IN BOOLEAN NewList ); NTSTATUS USBH_ParentDispatch( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN PIRP Irp ); NTSTATUS USBH_GetConfigurationDescriptor( IN PDEVICE_OBJECT DeviceObject, IN OUT PUSB_CONFIGURATION_DESCRIPTOR *DataBuffer ); PWCHAR USBH_BuildDeviceID( IN USHORT IdVendor, IN USHORT IdProduct, IN LONG MiId, IN BOOLEAN IsHubClass ); PWCHAR USBH_BuildHardwareIDs( IN USHORT IdVendor, IN USHORT IdProduct, IN USHORT BcdDevice, IN LONG MiId, IN BOOLEAN IsHubClass ); PWCHAR USBH_BuildCompatibleIDs( IN PUCHAR CompatibleID, IN PUCHAR SubCompatibleID, IN UCHAR Class, IN UCHAR SubClass, IN UCHAR Protocol, IN BOOLEAN DeviceClass, IN BOOLEAN DeviceIsHighSpeed ); PWCHAR USBH_BuildInstanceID( IN PWCHAR UniqueIdString, IN ULONG Length ); NTSTATUS USBH_GetDeviceDescriptor( IN PDEVICE_OBJECT HubFDO, OUT PUSB_DEVICE_DESCRIPTOR DeviceDescriptor ); NTSTATUS USBH_GetDeviceQualifierDescriptor( IN PDEVICE_OBJECT DevicePDO, OUT PUSB_DEVICE_QUALIFIER_DESCRIPTOR DeviceQualifierDescriptor ); NTSTATUS USBH_FunctionPdoDispatch( IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction, IN PIRP Irp ); NTSTATUS USBH_CloseConfiguration( IN PDEVICE_EXTENSION_FDO DeviceExtensionFdo ); NTSTATUS USBH_IoctlGetNodeInformation( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_IoctlGetHubCapabilities( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_IoctlGetNodeConnectionInformation( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp, IN BOOLEAN ExApi ); NTSTATUS USBH_IoctlGetDescriptorForPDO( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_SyncSubmitUrb( IN PDEVICE_OBJECT DeviceObject, IN PURB Urb ); NTSTATUS USBH_Transact( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUCHAR DataBuffer, IN ULONG DataBufferLength, IN BOOLEAN DataOutput, IN USHORT Function, IN UCHAR RequestType, IN UCHAR Request, IN USHORT Feature, IN USHORT Port, OUT PULONG BytesTransferred ); NTSTATUS USBH_GetNameFromPdo( IN PDEVICE_OBJECT PdoDeviceObject, IN OUT PUNICODE_STRING DeviceNameUnicodeString ); NTSTATUS USBH_MakeName( PDEVICE_OBJECT PdoDeviceObject, ULONG NameLength, PWCHAR Name, PUNICODE_STRING UnicodeString ); NTSTATUS USBH_FdoStartDevice( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); VOID USBH_QueryCapabilities( IN PDEVICE_OBJECT PdoDeviceObject, IN PDEVICE_CAPABILITIES DeviceCapabilities ); NTSTATUS USBH_FdoStopDevice( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_FdoRemoveDevice( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_FdoQueryBusRelations( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); VOID UsbhFdoCleanup( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_ProcessDeviceInformation( IN OUT PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_PdoQueryId( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_PdoPnP( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp, IN UCHAR MinorFunction, IN PBOOLEAN CompleteIrp ); NTSTATUS USBH_PdoRemoveDevice( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_PdoQueryCapabilities( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_PdoSetPower( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_ParentFdoStopDevice( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN PIRP Irp ); NTSTATUS USBH_ParentFdoRemoveDevice( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN PIRP Irp ); VOID UsbhParentFdoCleanup( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent ); NTSTATUS USBH_ParentQueryBusRelations( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN PIRP Irp ); NTSTATUS USBH_FunctionPdoQueryId( IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction, IN PIRP Irp ); NTSTATUS USBH_FunctionPdoQueryDeviceText( IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction, IN PIRP Irp ); NTSTATUS USBH_FunctionPdoPnP( IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction, IN PIRP Irp, IN UCHAR MinorFunction, IN OUT PBOOLEAN IrpNeedsCompletion ); NTSTATUS USBH_IoctlGetNodeName( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); BOOLEAN USBH_HubIsBusPowered( IN PDEVICE_OBJECT DeviceObject, IN PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor ); NTSTATUS USBH_SyncGetStatus( IN PDEVICE_OBJECT HubFDO, IN OUT PUSHORT StatusBits, IN USHORT function, IN USHORT Index ); NTSTATUS USBH_GetSerialNumberString( IN PDEVICE_OBJECT DevicePDO, IN OUT PWCHAR *SerialNumberBuffer, IN OUT PUSHORT SerialNumberBufferLength, IN LANGID LanguageId, IN UCHAR StringIndex ); NTSTATUS USBH_SyncGetStringDescriptor( IN PDEVICE_OBJECT DevicePDO, IN UCHAR Index, IN USHORT LangId, IN OUT PUSB_STRING_DESCRIPTOR Buffer, IN ULONG BufferLength, IN PULONG BytesReturned, IN BOOLEAN ExpectHeader ); NTSTATUS USBH_SyncFeatureRequest( IN PDEVICE_OBJECT DeviceObject, IN USHORT FeatureSelector, IN USHORT Index, IN USHORT Target, IN BOOLEAN ClearFeature ); NTSTATUS USBH_PdoIoctlGetPortStatus( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_PdoIoctlEnablePort( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_FdoDeferPoRequestCompletion( IN PDEVICE_OBJECT DeviceObject, IN UCHAR MinorFunction, IN POWER_STATE PowerState, IN PVOID Context, IN PIO_STATUS_BLOCK IoStatus ); NTSTATUS USBH_DeferIrpCompletion( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN PVOID Context ); NTSTATUS USBH_BuildFunctionConfigurationDescriptor( IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction, IN OUT PUCHAR Buffer, IN ULONG BufferLength, OUT PULONG BytesReturned ); NTSTATUS USBH_ResetHub( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_ResetDevice( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber, IN BOOLEAN KeepConfiguration, IN ULONG RetryIteration ); NTSTATUS USBH_PdoIoctlResetPort( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_SetPowerD1orD2( IN PIRP Irp, IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_SetPowerD0( IN PIRP Irp, IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_SetPowerD3( IN PIRP Irp, IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_PdoQueryDeviceText( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_CheckDeviceLanguage( IN PDEVICE_OBJECT DevicePDO, IN LANGID LanguageId ); NTSTATUS USBH_PdoPower( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp, IN UCHAR MinorFunction ); NTSTATUS USBH_SubmitInterruptTransfer( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_SymbolicLink( BOOLEAN CreateFlag, PDEVICE_EXTENSION_PORT DeviceExtensionPort, LPGUID lpGuid ); NTSTATUS USBH_SyncPowerOffPorts( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_RestoreDevice( IN OUT PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN BOOLEAN KeepConfiguration ); NTSTATUS USBH_PnPIrp_Complete( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN PVOID Context ); NTSTATUS USBH_ParentCreateFunctionList( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN PUSBD_INTERFACE_LIST_ENTRY InterfaceList, IN PURB Urb ); NTSTATUS USBH_PdoStopDevice( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_ChangeIndicationProcessChange( IN PDEVICE_OBJECT PNull, IN PIRP Irp, IN PVOID Context ); NTSTATUS USBH_ChangeIndicationAckChangeComplete( IN PDEVICE_OBJECT PNull, IN PIRP Irp, IN PVOID Context ); NTSTATUS USBH_ChangeIndicationAckChange( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp, IN PURB Urb, IN USHORT Port, IN USHORT FeatureSelector ); NTSTATUS USBH_IoctlGetNodeConnectionDriverKeyName( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_FdoSubmitWaitWakeIrp( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_ChangeIndicationQueryChange( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp, IN PURB Urb, IN USHORT Port ); NTSTATUS USBH_InvalidatePortDeviceState( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USB_CONNECTION_STATUS ConnectStatus, IN USHORT PortNumber ); NTSTATUS USBH_PdoEvent( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber ); USB_CONNECTION_STATUS UsbhGetConnectionStatus( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_ParentSubmitWaitWakeIrp( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent ); NTSTATUS USBH_WriteFailReason( IN PDEVICE_OBJECT PhysicalDeviceObject, IN ULONG FailReason ); NTSTATUS USBH_WriteRegistryKeyValue ( IN HANDLE Handle, IN PWCHAR KeyNameString, IN ULONG KeyNameStringLength, IN ULONG Data ); NTSTATUS USBH_SystemControl ( IN PDEVICE_EXTENSION_FDO DeviceExtensionFdo, IN PIRP Irp ); NTSTATUS USBH_PortSystemControl ( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_ExecuteWmiMethod( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN ULONG GuidIndex, IN ULONG InstanceIndex, IN ULONG MethodId, IN ULONG InBufferSize, IN ULONG OutBufferSize, IN OUT PUCHAR Buffer ); NTSTATUS USBH_QueryWmiRegInfo( IN PDEVICE_OBJECT DeviceObject, OUT PULONG RegFlags, OUT PUNICODE_STRING InstanceName, OUT PUNICODE_STRING *RegistryPath, OUT PUNICODE_STRING MofResourceName, OUT PDEVICE_OBJECT *Pdo ); NTSTATUS USBH_PortQueryWmiRegInfo( IN PDEVICE_OBJECT DeviceObject, OUT PULONG RegFlags, OUT PUNICODE_STRING InstanceName, OUT PUNICODE_STRING *RegistryPath, OUT PUNICODE_STRING MofResourceName, OUT PDEVICE_OBJECT *Pdo ); NTSTATUS USBH_FlushPortChange( IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN OUT PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_PdoIoctlCyclePort( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_ResetPortOvercurrent( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber, IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_SyncGetControllerInfo( IN PDEVICE_OBJECT DeviceObject, IN PVOID Buffer, IN ULONG BufferLength, IN ULONG Ioctl ); NTSTATUS USBH_SyncGetHubName( IN PDEVICE_OBJECT DeviceObject, IN PVOID Buffer, IN ULONG BufferLength ); NTSTATUS USBH_IoctlHubSymbolicName( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); NTSTATUS USBH_SetWmiDataBlock( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN ULONG GuidIndex, IN ULONG InstanceIndex, IN ULONG BufferSize, IN PUCHAR Buffer ); NTSTATUS USBH_QueryWmiDataBlock( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN ULONG GuidIndex, IN ULONG InstanceIndex, IN ULONG InstanceCount, IN OUT PULONG InstanceLengthArray, IN ULONG OutBufferSize, OUT PUCHAR Buffer ); NTSTATUS USBH_PortQueryWmiDataBlock( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN ULONG GuidIndex, IN ULONG InstanceIndex, IN ULONG InstanceCount, IN OUT PULONG InstanceLengthArray, IN ULONG OutBufferSize, OUT PUCHAR Buffer ); NTSTATUS USBH_SetRegistryKeyValue ( IN HANDLE Handle, IN PUNICODE_STRING KeyNameUnicodeString, IN PVOID Data, IN ULONG DataLength, IN ULONG KeyType ); NTSTATUS USBH_SetPdoRegistryParameter ( IN PDEVICE_OBJECT PhysicalDeviceObject, IN PWCHAR KeyName, IN ULONG KeyNameLength, IN PVOID Data, IN ULONG DataLength, IN ULONG KeyType, IN ULONG DevInstKeyType ); NTSTATUS USBH_GetPdoRegistryParameter( IN PDEVICE_OBJECT PhysicalDeviceObject, IN PWCHAR ValueName, OUT PVOID Data, IN ULONG DataLength, OUT PULONG Type, OUT PULONG ActualDataLength ); NTSTATUS USBH_OsVendorCodeQueryRoutine( IN PWSTR ValueName, IN ULONG ValueType, IN PVOID ValueData, IN ULONG ValueLength, IN PVOID Context, IN PVOID EntryContext ); VOID USBH_GetMsOsVendorCode( IN PDEVICE_OBJECT DeviceObject ); NTSTATUS USBH_GetMsOsFeatureDescriptor( IN PDEVICE_OBJECT DeviceObject, IN UCHAR Recipient, IN UCHAR Interface, IN USHORT Index, IN OUT PVOID DataBuffer, IN ULONG DataBufferLength, OUT PULONG BytesReturned ); VOID USBH_InstallExtPropDesc ( IN PDEVICE_OBJECT DeviceObject ); VOID USBH_InstallExtPropDescSections ( PDEVICE_OBJECT DeviceObject, PMS_EXT_PROP_DESC pMsExtPropDesc ); PMS_EXT_CONFIG_DESC USBH_GetExtConfigDesc ( IN PDEVICE_OBJECT DeviceObject ); BOOLEAN USBH_ValidateExtConfigDesc ( IN PMS_EXT_CONFIG_DESC MsExtConfigDesc, IN PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor ); NTSTATUS USBH_CalculateInterfaceBandwidth( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PUSBD_INTERFACE_INFORMATION Interface, IN OUT PULONG Bandwidth // in kenr units? ); NTSTATUS USBH_RegQueryDeviceIgnoreHWSerNumFlag( IN USHORT idVendor, IN USHORT idProduct, IN OUT PBOOLEAN IgnoreHWSerNumFlag ); NTSTATUS USBH_RegQueryGenericUSBDeviceString( IN OUT PWCHAR *GenericUSBDeviceString ); VOID USBH_ParentCompleteFunctionWakeIrps( IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent, IN NTSTATUS NtStatus ); BOOLEAN USBH_ValidateConfigurationDescriptor( PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor, USBD_STATUS *UsbdSatus ); VOID USBH_HubCompletePortWakeIrps( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN NTSTATUS NtStatus ); VOID USBH_HubCompletePortIdleIrps( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN NTSTATUS NtStatus ); PUSB_DEVICE_HANDLE USBH_SyncGetDeviceHandle( IN PDEVICE_OBJECT DeviceObject ); VOID USBH_CompletePowerIrp( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp, IN NTSTATUS NtStatus ); VOID USBH_HubESDRecoveryWorker( IN PVOID Context); NTSTATUS USBH_ScheduleESDRecovery( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); // these are for the USB2 'backport' PWCHAR USBH_BuildHubHardwareIDs( IN USHORT IdVendor, IN USHORT IdProduct, IN USHORT BcdDevice, IN LONG MiId ); PWCHAR USBH_BuildHubCompatibleIDs( IN UCHAR Class, IN UCHAR SubClass, IN UCHAR Protocol, IN BOOLEAN DeviceClass, IN BOOLEAN DeviceIsHighSpeed ); NTSTATUS USBH_IoctlCycleHubPort( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); VOID USBH_InternalCyclePort( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT PortNumber, IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); PWCHAR USBH_BuildHubDeviceID( IN USHORT IdVendor, IN USHORT IdProduct, IN LONG MiId ); NTSTATUS USBHUB_GetBusInfo( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_BUS_NOTIFICATION BusInfo, IN PVOID BusContext ); NTSTATUS USBHUB_GetBusInfoDevice( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PUSB_BUS_NOTIFICATION BusInfo ); NTSTATUS USBHUB_GetBusInterfaceUSBDI( IN PDEVICE_OBJECT HubPdo, IN PUSB_BUS_INTERFACE_USBDI_V2 BusInterface ); USB_DEVICE_TYPE USBH_GetDeviceType( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_DEVICE_HANDLE DeviceData ); VOID USBH_CompletePortIdleNotification( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); VOID USBH_PortIdleNotificationCancelRoutine( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp ); NTSTATUS USBH_FdoSubmitIdleRequestIrp( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_HubSetD0( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBHUB_GetControllerName( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_HUB_NAME Buffer, IN ULONG BufferLength ); NTSTATUS USBHUB_GetExtendedHubInfo( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PUSB_EXTHUB_INFORMATION_0 ExtendedHubInfo ); BOOLEAN USBH_DoesHubNeedWaitWake( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); VOID USBH_CheckHubIdle( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_PdoSetContentId( IN PIRP irp, IN PVOID pKsProperty, IN PVOID pvData ); BOOLEAN USBH_CheckDeviceIDUnique( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN USHORT IDVendor, IN USHORT IDProduct, IN PWCHAR SerialNumberBuffer, IN USHORT SerialNumberBufferLength ); VOID USBH_IdleCompletePowerHubWorker( IN PVOID Context ); BOOLEAN USBH_DeviceIs2xDualMode( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); PDEVICE_EXTENSION_HUB USBH_GetRootHubDevExt( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); VOID USBH_CheckLeafHubsIdle( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); VOID USBH_HubCancelWakeIrp( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); VOID USBH_HubCancelIdleIrp( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); NTSTATUS USBH_IoctlGetNodeConnectionAttributes( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub, IN PIRP Irp ); VOID USBH_CompletePortIdleIrpsWorker( IN PVOID Context); VOID USBH_CompletePortWakeIrpsWorker( IN PVOID Context); VOID USBH_HubAsyncPowerWorker( IN PVOID Context); VOID USBH_IdleCancelPowerHubWorker( IN PVOID Context); NTSTATUS USBD_InitUsb2Hub( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); VOID USBH_PdoSetCapabilities( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort ); NTSTATUS USBH_HubPnPIrp_Complete( IN PDEVICE_OBJECT DeviceObject, IN PIRP Irp, IN PVOID Context ); NTSTATUS USBH_RegQueryUSBGlobalSelectiveSuspend( IN OUT PBOOLEAN DisableSelectiveSuspend ); VOID USBH_SyncRefreshPortAttributes( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBD_RegisterRhHubCallBack( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBD_UnRegisterRhHubCallBack( IN PDEVICE_EXTENSION_HUB DeviceExtensionHub ); NTSTATUS USBH_PdoStartDevice( IN PDEVICE_EXTENSION_PORT DeviceExtensionPort, IN PIRP Irp ); #define PDO_EXT(p) PdoExt((p)) PDEVICE_EXTENSION_PORT PdoExt( PDEVICE_OBJECT DeviceObject ); #ifdef TEST_MS_DESC #pragma message ("Warning! Compiling in non-retail test code!") NTSTATUS USBH_SyncGetMsOsDescriptor( IN PDEVICE_OBJECT DeviceObject, IN USHORT Index, IN OUT PUCHAR DataBuffer, IN ULONG DataBufferLength, OUT PULONG BytesReturned); NTSTATUS USBH_TestGetMsOsDescriptor( IN PDEVICE_OBJECT DeviceObject, IN USHORT Index ); #endif #define LOG_PNP 0x00000001 #if DBG NTSTATUS USBH_GetClassGlobalDebugRegistryParameters( ); VOID UsbhInfo( PDEVICE_EXTENSION_HUB DeviceExtensionHub ); VOID USBH_ShowPortState( IN USHORT PortNumber, IN PPORT_STATE PortState ); #define DEBUG_LOG #define USBH_ASSERT(exp) \ if (!(exp)) { \ USBH_Assert( #exp, __FILE__, __LINE__, NULL );\ } VOID USBH_Assert( IN PVOID FailedAssertion, IN PVOID FileName, IN ULONG LineNumber, IN PCHAR Message ); #else #define USBH_ASSERT(exp) #define UsbhInfo(de) #endif #ifdef DEBUG_LOG VOID USBH_LogInit( ); VOID USBH_LogFree( ); #define LOGENTRY(mask, sig, info1, info2, info3) \ USBH_Debug_LogEntry(mask, sig, \ (ULONG_PTR)info1, \ (ULONG_PTR)info2, \ (ULONG_PTR)info3) VOID USBH_Debug_LogEntry( IN ULONG Mask, IN CHAR *Name, IN ULONG_PTR Info1, IN ULONG_PTR Info2, IN ULONG_PTR Info3 ); #else #define LOGENTRY(mask, sig, info1, info2, info3) #define USBH_LogInit() #define USBH_LogFree() #endif // last workitem will let the shutdown code continue // !! do not reference the devicExtension beyond this point // if event is signaled #define USBH_DEC_PENDING_IO_COUNT(de) \ LOGENTRY(LOG_PNP, "PEN-", de, &de->PendingRequestEvent, de->PendingRequestCount); \ if (InterlockedDecrement(&de->PendingRequestCount) == 0) {\ USBH_ASSERT(de->HubFlags & HUBFLAG_DEVICE_STOPPING); \ LOGENTRY(LOG_PNP, "hWAK", de, &de->PendingRequestEvent, de->PendingRequestCount); \ KeSetEvent(&de->PendingRequestEvent, 1, FALSE); \ } #define USBH_INC_PENDING_IO_COUNT(de) \ {\ LOGENTRY(LOG_PNP, "PEN+", de, &de->PendingRequestEvent, de->PendingRequestCount); \ InterlockedIncrement(&de->PendingRequestCount);\ } PPORT_DATA USBH_PortDataDataFromPdo( PDEVICE_EXTENSION_HUB HubDevExt, PDEVICE_OBJECT Pdo );