#include "precomp.h" // // OSI.C // OS Isolation layer, display driver side // // Copyright(c) Microsoft 1997- // #include #include // // These are the default 20 Windows colors, lifted from the base S3 driver. // // Global Table defining the 20 Window default colours. For 256 colour // palettes the first 10 must be put at the beginning of the palette // and the last 10 at the end of the palette. const PALETTEENTRY s_aWinColors[20] = { { 0, 0, 0, 0 }, // 0 { 0x80,0, 0, 0 }, // 1 { 0, 0x80,0, 0 }, // 2 { 0x80,0x80,0, 0 }, // 3 { 0, 0, 0x80,0 }, // 4 { 0x80,0, 0x80,0 }, // 5 { 0, 0x80,0x80,0 }, // 6 { 0xC0,0xC0,0xC0,0 }, // 7 { 192, 220, 192, 0 }, // 8 { 166, 202, 240, 0 }, // 9 { 255, 251, 240, 0 }, // 10 { 160, 160, 164, 0 }, // 11 { 0x80,0x80,0x80,0 }, // 12 { 0xFF,0, 0 ,0 }, // 13 { 0, 0xFF,0 ,0 }, // 14 { 0xFF,0xFF,0 ,0 }, // 15 { 0 ,0, 0xFF,0 }, // 16 { 0xFF,0, 0xFF,0 }, // 17 { 0, 0xFF,0xFF,0 }, // 18 { 0xFF,0xFF,0xFF,0 }, // 19 }; // // Functions supported by our Display Driver. Each entry is of the form: // // index - NT DDK defined index for the DDI function // // function - pointer to our intercept function // // const DRVFN s_osiDriverFns[] = { // // NT4 FUNCTIONS // { INDEX_DrvEnablePDEV, (PFN)DrvEnablePDEV }, { INDEX_DrvCompletePDEV, (PFN)DrvCompletePDEV }, { INDEX_DrvDisablePDEV, (PFN)DrvDisablePDEV }, { INDEX_DrvEnableSurface, (PFN)DrvEnableSurface }, { INDEX_DrvDisableSurface, (PFN)DrvDisableSurface }, { INDEX_DrvAssertMode, (PFN)DrvAssertMode }, { INDEX_DrvResetPDEV, (PFN)DrvResetPDEV }, // INDEX_DrvCreateDeviceBitmap not used // INDEX_DrvDeleteDeviceBitmap not used { INDEX_DrvRealizeBrush, (PFN)DrvRealizeBrush }, // INDEX_DrvDitherColor not used { INDEX_DrvStrokePath, (PFN)DrvStrokePath }, { INDEX_DrvFillPath, (PFN)DrvFillPath }, { INDEX_DrvStrokeAndFillPath, (PFN)DrvStrokeAndFillPath }, { INDEX_DrvPaint, (PFN)DrvPaint }, { INDEX_DrvBitBlt, (PFN)DrvBitBlt }, { INDEX_DrvCopyBits, (PFN)DrvCopyBits }, { INDEX_DrvStretchBlt, (PFN)DrvStretchBlt }, { INDEX_DrvSetPalette, (PFN)DrvSetPalette }, { INDEX_DrvTextOut, (PFN)DrvTextOut }, { INDEX_DrvEscape, (PFN)DrvEscape }, // INDEX_DrvDrawEscape not used // INDEX_DrvQueryFont not used // INDEX_DrvQueryFontTree not used // INDEX_DrvQueryFontData not used { INDEX_DrvSetPointerShape, (PFN)DrvSetPointerShape }, { INDEX_DrvMovePointer, (PFN)DrvMovePointer }, { INDEX_DrvLineTo, (PFN)DrvLineTo }, // INDEX_DrvSendPage not used // INDEX_DrvStartPage not used // INDEX_DrvEndDoc not used // INDEX_DrvStartDoc not used // INDEX_DrvGetGlyphMode not used // INDEX_DrvSynchronize not used { INDEX_DrvSaveScreenBits, (PFN)DrvSaveScreenBits }, { INDEX_DrvGetModes, (PFN)DrvGetModes }, // INDEX_DrvFree not used // INDEX_DrvDestroyFont not used // INDEX_DrvQueryFontCaps not used // INDEX_DrvLoadFontFile not used // INDEX_DrvUnloadFontFile not used // INDEX_DrvFontManagement not used // INDEX_DrvQueryTrueTypeTable not used // INDEX_DrvQueryTrueTypeOutline not used // INDEX_DrvGetTrueTypeFile not used // INDEX_DrvQueryFontFile not used // INDEX_DrvQueryAdvanceWidths not used // INDEX_DrvSetPixelFormat not used // INDEX_DrvDescribePixelFormat not used // INDEX_DrvSwapBuffers not used // INDEX_DrvStartBanding not used // INDEX_DrvNextBand not used // INDEX_DrvGetDirectDrawInfo not used // INDEX_DrvEnableDirectDraw not used // INDEX_DrvDisableDirectDraw not used // INDEX_DrvQuerySpoolType not used // // NT5 FUNCTIONS - 5 of them currently. If you add to this list, // update CFN_NT5 below. // // INDEX_DrvIcmCreateColorTransform not used // INDEX_DrvIcmDeleteColorTransform not used // INDEX_DrvIcmCheckBitmapBits not used // INDEX_DrvIcmSetDeviceGammaRamp not used { INDEX_DrvGradientFill, (PFN)DrvGradientFill }, { INDEX_DrvStretchBltROP, (PFN)DrvStretchBltROP }, { INDEX_DrvPlgBlt, (PFN)DrvPlgBlt }, { INDEX_DrvAlphaBlend, (PFN)DrvAlphaBlend }, // INDEX_DrvSynthesizeFont not used // INDEX_DrvGetSynthesizedFontFiles not used { INDEX_DrvTransparentBlt, (PFN)DrvTransparentBlt }, // INDEX_DrvQueryPerBandInfo not used // INDEX_DrvQueryDeviceSupport not used // INDEX_DrvConnect not used // INDEX_DrvDisconnect not used // INDEX_DrvReconnect not used // INDEX_DrvShadowConnect not used // INDEX_DrvShadowDisconnect not used // INDEX_DrvInvalidateRect not used // INDEX_DrvSetPointerPos not used // INDEX_DrvDisplayIOCtl not used // INDEX_DrvDeriveSurface not used // INDEX_DrvQueryGlyphAttrs not used { INDEX_DrvDisableDriver, (PFN) DrvDisableDriver } }; #define CFN_NT5 5 // // s_osiDefaultGdi // // This contains the default GDIINFO fields that are passed back to GDI // during DrvEnablePDEV. // // NOTE: This structure defaults to values for an 8bpp palette device. // Some fields are overwritten for different colour depths. // // It is expected that DDML ignores a lot of these parameters and // uses the values from the primary driver instead // const GDIINFO s_osiDefaultGdi = { GDI_DRIVER_VERSION, DT_RASDISPLAY, // ulTechnology 400, // ulHorzSize (display width: mm) 300, // ulVertSize (display height: mm) 0, // ulHorzRes (filled in later) 0, // ulVertRes (filled in later) 0, // cBitsPixel (filled in later) 1, // cPlanes (ULONG)-1, // ulNumColors (palette managed) 0, // flRaster (DDI reserved field) 96, // ulLogPixelsX (filled in later) 96, // ulLogPixelsY (filled in later) TC_RA_ABLE, // flTextCaps - If we had wanted console windows // to scroll by repainting the entire window, // instead of doing a screen-to-screen blt, we // would have set TC_SCROLLBLT (yes, the flag // is backwards). 0, // ulDACRed (filled in later) 0, // ulDACGreen (filled in later) 0, // ulDACBlue (filled in later) 0x0024, // ulAspectX 0x0024, // ulAspectY 0x0033, // ulAspectXY (one-to-one aspect ratio) 1, // xStyleStep 1, // yStyleStep 3, // denStyleStep -- Styles have a one-to-one // aspect ratio, and every dot is 3 pixels long { 0, 0 }, // ptlPhysOffset { 0, 0 }, // szlPhysSize 0, // ulNumPalReg { { 6700, 3300, 0 }, // Red { 2100, 7100, 0 }, // Green { 1400, 800, 0 }, // Blue { 1750, 3950, 0 }, // Cyan { 4050, 2050, 0 }, // Magenta { 4400, 5200, 0 }, // Yellow { 3127, 3290, 0 }, // AlignmentWhite 20000, // RedGamma 20000, // GreenGamma 20000, // BlueGamma 0, 0, 0, 0, 0, 0 // No dye correction for raster displays }, 0, // ulDevicePelsDPI (for printers only) PRIMARY_ORDER_CBA, // ulPrimaryOrder HT_PATSIZE_4x4_M, // ulHTPatternSize HT_FORMAT_8BPP, // ulHTOutputFormat HT_FLAG_ADDITIVE_PRIMS, // flHTFlags 0, // ulVRefresh 0, // ulBltAlignment 0, // ulPanningHorzRes 0, // ulPanningVertRes }; // // s_osiDefaultDevInfo // // This contains the default DEVINFO fields that are passed back to GDI // during DrvEnablePDEV. // // NOTE: This structure defaults to values for an 8bpp palette device. // Some fields are overwritten for different colour depths. // // const DEVINFO s_osiDefaultDevInfo = { { GCAPS_OPAQUERECT | GCAPS_DITHERONREALIZE | GCAPS_PALMANAGED | GCAPS_MONO_DITHER | GCAPS_COLOR_DITHER | GCAPS_LAYERED }, // NOTE: Only enable ASYNCMOVE if your code // and hardware can handle DrvMovePointer // calls at any time, even while another // thread is in the middle of a drawing // call such as DrvBitBlt. // flGraphicsFlags { 16,7,0,0,700,0,0,0,ANSI_CHARSET,OUT_DEFAULT_PRECIS, CLIP_DEFAULT_PRECIS,DEFAULT_QUALITY, VARIABLE_PITCH | FF_DONTCARE, L"System" }, // lfDefaultFont { 12,9,0,0,400,0,0,0,ANSI_CHARSET,OUT_DEFAULT_PRECIS, CLIP_STROKE_PRECIS,PROOF_QUALITY, VARIABLE_PITCH | FF_DONTCARE, L"MS Sans Serif" }, // lfAnsiVarFont { 12,9,0,0,400,0,0,0,ANSI_CHARSET,OUT_DEFAULT_PRECIS, CLIP_STROKE_PRECIS,PROOF_QUALITY, FIXED_PITCH | FF_DONTCARE, L"Courier" }, // lfAnsiFixFont 0, // cFonts BMF_8BPP, // iDitherFormat 8, // cxDither 8, // cyDither 0 // hpalDefault (filled in later) }; // // DrvEnableDriver - see NT DDK documentation. // // This is the only directly exported entry point to the display driver. // All other entry points are exported through the data returned from this // function. // BOOL DrvEnableDriver ( ULONG iEngineVersion, ULONG cj, DRVENABLEDATA* pded ) { DebugEntry(DrvEnableDriver); INIT_OUT(("DrvEnableDriver(iEngineVersion = 0x%08x)", iEngineVersion)); // // Check that the engine version is correct - we refuse to load on // other versions because we will almost certainly not work. // if ((iEngineVersion != DDI_DRIVER_VERSION_SP3) && (iEngineVersion != DDI_DRIVER_VERSION_NT5) && (iEngineVersion != DDI_DRIVER_VERSION_NT5_01)) { INIT_OUT(("DrvEnableDriver: Not NT 4.0 SP-3 or NT 5.0; failing enable")); return(FALSE); } // // Fill in as much as we can. Start with the entry points. // if ( cj >= FIELD_OFFSET(DRVENABLEDATA, pdrvfn) + FIELD_SIZE (DRVENABLEDATA, pdrvfn) ) { pded->pdrvfn = (DRVFN *)s_osiDriverFns; } // // Size of our entry point array. // if ( cj >= FIELD_OFFSET(DRVENABLEDATA, c) + FIELD_SIZE (DRVENABLEDATA, c) ) { // // If this is NT4, return back a subset -- it doesn't like tables // with unknown indeces // pded->c = sizeof(s_osiDriverFns) / sizeof(s_osiDriverFns[0]); if (iEngineVersion != DDI_DRIVER_VERSION_NT5 && iEngineVersion != DDI_DRIVER_VERSION_NT5_01) { pded->c -= CFN_NT5; } INIT_OUT(("DrvEnableDriver: Returning driver function count %u", pded->c)); } // // DDI version this driver was targeted for is passed back to engine. // Future graphics engines may break calls down to old driver format. // if ( cj >= FIELD_OFFSET(DRVENABLEDATA, iDriverVersion) + FIELD_SIZE (DRVENABLEDATA, iDriverVersion) ) { // // Return back NT5 when we're on NT5. Hopefully this will work // OK... // pded->iDriverVersion = iEngineVersion; INIT_OUT(("DrvEnableDriver: Returning driver version 0x%08x", pded->iDriverVersion)); } DebugExitVOID(DrvEnableDriver); return(TRUE); } // // DrvDisableDriver - see NT DDK documentation. // VOID DrvDisableDriver(VOID) { DebugEntry(DrvDisableDriver); DebugExitVOID(DrvDisableDriver); } // // DrvEnablePDEV - see NT DDK documentation. // // Initializes a bunch of fields for GDI, based on the mode we've been // asked to do. This is the first thing called after DrvEnableDriver, when // GDI wants to get some information about us. // // (This function mostly returns back information; DrvEnableSurface is used // for initializing the hardware and driver components.) // // DHPDEV DrvEnablePDEV(DEVMODEW* pdm, PWSTR pwszLogAddr, ULONG cPat, HSURF* phsurfPatterns, ULONG cjCaps, ULONG* pdevcaps, ULONG cjDevInfo, DEVINFO* pdi, HDEV hdev, PWSTR pwszDeviceName, HANDLE hDriver) { DHPDEV rc = NULL; LPOSI_PDEV ppdev = NULL; GDIINFO gdiInfoNew; DebugEntry(DrvEnablePDEV); INIT_OUT(("DrvEnablePDEV: Parameters:")); INIT_OUT((" PWSTR pdm->dmDeviceName %ws", pdm->dmDeviceName)); INIT_OUT((" HDEV hdev 0x%08x", hdev)); INIT_OUT((" PWSTR pwszDeviceName %ws", pwszDeviceName)); INIT_OUT((" HANDLE hDriver 0x%08x", hDriver)); // // This function only sets up local data, so shared memory protection // is not required. // // // Make sure that we have large enough data to reference. // if ((cjCaps < sizeof(GDIINFO)) || (cjDevInfo < sizeof(DEVINFO))) { ERROR_OUT(( "Buffer size too small %lu %lu", cjCaps, cjDevInfo)); DC_QUIT; } // // Allocate a physical device structure. // ppdev = EngAllocMem(FL_ZERO_MEMORY, sizeof(OSI_PDEV), OSI_ALLOC_TAG); if (ppdev == NULL) { ERROR_OUT(( "DrvEnablePDEV - Failed EngAllocMem")); DC_QUIT; } ppdev->hDriver = hDriver; // // Set up the current screen mode information based upon the supplied // mode settings. // if (!OSIInitializeMode((GDIINFO *)pdevcaps, pdm, ppdev, &gdiInfoNew, pdi)) { ERROR_OUT(( "Failed to initialize mode")); DC_QUIT; } memcpy(pdevcaps, &gdiInfoNew, min(sizeof(GDIINFO), cjCaps)); INIT_OUT(("DrvEnablePDEV: Returning DEVINFO:")); INIT_OUT((" FLONG flGraphicsCaps 0x%08x", pdi->flGraphicsCaps)); INIT_OUT((" ULONG iDitherFormat %d", pdi->iDitherFormat)); INIT_OUT((" HPALETTE hpalDefault 0x%08x", pdi->hpalDefault)); INIT_OUT(("DrvEnablePDEV: Returning GDIINFO (pdevcaps):")); INIT_OUT((" ULONG ulVersion 0x%08x", gdiInfoNew.ulVersion)); INIT_OUT((" ULONG ulHorzSize %d", gdiInfoNew.ulHorzSize)); INIT_OUT((" ULONG ulVertSize %d", gdiInfoNew.ulVertSize)); INIT_OUT((" ULONG ulHorzRes %d", gdiInfoNew.ulHorzRes)); INIT_OUT((" ULONG ulVertRes %d", gdiInfoNew.ulVertRes)); INIT_OUT((" ULONG cBitsPixel %d", gdiInfoNew.cBitsPixel)); INIT_OUT((" ULONG cPlanes %d", gdiInfoNew.cPlanes)); INIT_OUT((" ULONG ulNumColors %d", gdiInfoNew.ulNumColors)); INIT_OUT((" ULONG ulDACRed 0x%08x", gdiInfoNew.ulDACRed)); INIT_OUT((" ULONG ulDACGreen 0x%08x", gdiInfoNew.ulDACGreen)); INIT_OUT((" ULONG ulDACBlue 0x%08x", gdiInfoNew.ulDACBlue)); INIT_OUT((" ULONG ulHTOutputFormat %d", gdiInfoNew.ulHTOutputFormat)); // // We have successfully initialized - return the new PDEV. // rc = (DHPDEV)ppdev; DC_EXIT_POINT: // // Release any resources if we failed to initialize. // if (rc == NULL) { ERROR_OUT(("DrvEnablePDEV failed; cleaning up by disabling")); DrvDisablePDEV(NULL); } DebugExitPVOID(DrvEnablePDEV, rc); return(rc); } // // DrvDisablePDEV - see NT DDK documentation // // Release the resources allocated in DrvEnablePDEV. If a surface has been // enabled DrvDisableSurface will have already been called. // // Note that this function will be called when previewing modes in the // Display Applet, but not at system shutdown. // // Note: In an error, we may call this before DrvEnablePDEV is done. // // VOID DrvDisablePDEV(DHPDEV dhpdev) { LPOSI_PDEV ppdev = (LPOSI_PDEV)dhpdev; DebugEntry(DrvDisablePDEV); INIT_OUT(("DrvDisablePDEV(dhpdev = 0x%08x)", dhpdev)); // // Free the resources we allocated for the display. // if (ppdev != NULL) { if (ppdev->hpalCreated != NULL) { EngDeletePalette(ppdev->hpalCreated); ppdev->hpalCreated = NULL; } if (ppdev->pPal != NULL) { EngFreeMem(ppdev->pPal); ppdev->pPal = NULL; } EngFreeMem(ppdev); } DebugExitVOID(DrvDisablePDEV); } // // DrvCompletePDEV - see NT DDK documentation // // Stores the HPDEV, the engine's handle for this PDEV, in the DHPDEV. // VOID DrvCompletePDEV( DHPDEV dhpdev, HDEV hdev ) { DebugEntry(DrvCompletePDEV); // // Store the device handle for our display handle. // INIT_OUT(("DrvCompletePDEV(dhpdev = 0x%08x, hdev = 0x%08x)", dhpdev, hdev)); ((LPOSI_PDEV)dhpdev)->hdevEng = hdev; DebugExitVOID(DrvCompletePDEV); } // // DrvResetPDEV - see NT DDK documentation // // Allows us to reject dynamic screen changes if necessary ON NT4 ONLY // This is NOT CALLED on NT5. // BOOL DrvResetPDEV ( DHPDEV dhpdevOld, DHPDEV dhpdevNew ) { BOOL rc = TRUE; DebugEntry(DrvResetPDEV); INIT_OUT(("DrvResetPDEV(dhpdevOld = 0x%08x, dhpdevNew = 0x%08x)", dhpdevOld, dhpdevNew)); // // We can only allow the display driver to change modes while DC-Share // is not running. // if (g_shmMappedMemory != NULL) { // // Deny the request. // rc = FALSE; } DebugExitDWORD(DrvResetPDEV, rc); return(rc); } // // DrvEnableSurface - see NT DDK documentation // // Creates the drawing surface and initializes driver components. This // function is called after DrvEnablePDEV, and performs the final device // initialization. // // HSURF DrvEnableSurface(DHPDEV dhpdev) { LPOSI_PDEV ppdev = (LPOSI_PDEV)dhpdev; HSURF hsurf; SIZEL sizl; LPOSI_DSURF pdsurf; HSURF rc = 0; DWORD returnedDataLength; DWORD MaxWidth, MaxHeight; VIDEO_MEMORY videoMemory; VIDEO_MEMORY_INFORMATION videoMemoryInformation; DebugEntry(DrvEnableSurface); INIT_OUT(("DrvEnableSurface: Parameters:")); INIT_OUT((" LPOSI_PDEV ppdev 0x%08x", ppdev)); INIT_OUT((" HDRIVER ->hDriver 0x%08x", ppdev->hDriver)); INIT_OUT((" INT ->cxScreen %d", ppdev->cxScreen)); INIT_OUT((" INT ->cyScreen %d", ppdev->cyScreen)); // // Now create our private surface structure. // // Whenever we get a call to draw directly to the screen, we'll get // passed a pointer to a SURFOBJ whose 'dhpdev' field will point // to our PDEV structure, and whose 'dhsurf' field will point to the // DSURF structure allocated below. // // Every device bitmap we create in DrvCreateDeviceBitmap will also // have its own unique DSURF structure allocated (but will share the // same PDEV). To make our code more polymorphic for handling drawing // to either the screen or an off-screen bitmap, we have the same // structure for both. // pdsurf = EngAllocMem(FL_ZERO_MEMORY, sizeof(OSI_DSURF), OSI_ALLOC_TAG); if (pdsurf == NULL) { ERROR_OUT(( "DrvEnableSurface - Failed pdsurf EngAllocMem")); DC_QUIT; } // // Store the screen surface details. // ppdev->pdsurfScreen = pdsurf; pdsurf->sizl.cx = ppdev->cxScreen; pdsurf->sizl.cy = ppdev->cyScreen; pdsurf->ppdev = ppdev; INIT_OUT(("DrvEnableSurface: Returning surface pointer 0x%08x", pdsurf)); // // Only map the shared memory the first time we are called. // if (g_asSharedMemory == NULL) { // // Map the pointer to the shared section in the miniport driver // videoMemory.RequestedVirtualAddress = NULL; if (EngDeviceIoControl(ppdev->hDriver, IOCTL_VIDEO_MAP_VIDEO_MEMORY, &videoMemory, sizeof(VIDEO_MEMORY), &videoMemoryInformation, sizeof(VIDEO_MEMORY_INFORMATION), &returnedDataLength)) { ERROR_OUT(( "Could not MAP miniport section")); DC_QUIT; } INIT_OUT(("DrvEnableSurface: Got video memory info from EngDeviceIoControl:")); INIT_OUT((" FrameBufferBase 0x%08x", videoMemoryInformation.FrameBufferBase)); INIT_OUT((" FrameBufferLength 0x%08x", videoMemoryInformation.FrameBufferLength)); g_shmSharedMemorySize = videoMemoryInformation.FrameBufferLength; // First block is shared memory header g_asSharedMemory = (LPSHM_SHARED_MEMORY) videoMemoryInformation.FrameBufferBase; // Next are the two large OA_FAST_DATA blocks g_poaData[0] = (LPOA_SHARED_DATA)(g_asSharedMemory + 1); g_poaData[1] = (LPOA_SHARED_DATA)(g_poaData[0] + 1); } // // Next, have GDI create the actual SURFOBJ. // // Our drawing surface is going to be 'device-managed', meaning that // GDI cannot draw on the framebuffer bits directly, and as such we // create the surface via EngCreateDeviceSurface. By doing this, we // ensure that GDI will only ever access the bitmaps bits via the Drv // calls that we've HOOKed. // sizl.cx = ppdev->cxScreen; sizl.cy = ppdev->cyScreen; // // Otherwise the primary display driver has its own bitmap used by the // physical hardware, so we do not need to do any drawing ourself. // INIT_OUT(("DrvEnableSurface: Calling EngCreateDeviceSurface with:")); INIT_OUT((" Sizl.cx %d", sizl.cx)); INIT_OUT((" Sizl.cy %d", sizl.cy)); INIT_OUT((" BitmapFormat %d", ppdev->iBitmapFormat)); hsurf = EngCreateDeviceSurface( (DHSURF)pdsurf, sizl, ppdev->iBitmapFormat ); if (hsurf == 0) { ERROR_OUT(( "Could not allocate surface")); DC_QUIT; } // // Store the screen surface handle. // ppdev->hsurfScreen = hsurf; // // Now associate the surface and the PDEV. // // We have to associate the surface we just created with our physical // device so that GDI can get information related to the PDEV when // it's drawing to the surface (such as, for example, the length of // styles on the device when simulating styled lines). // if (!EngAssociateSurface(hsurf, ppdev->hdevEng, HOOK_BITBLT | HOOK_STRETCHBLT | HOOK_PLGBLT | HOOK_TEXTOUT | HOOK_PAINT | // OBSOLETE HOOK_STROKEPATH | HOOK_FILLPATH | HOOK_STROKEANDFILLPATH | HOOK_LINETO | HOOK_COPYBITS | HOOK_STRETCHBLTROP | HOOK_TRANSPARENTBLT | HOOK_ALPHABLEND | HOOK_GRADIENTFILL | HOOK_SYNCHRONIZEACCESS)) // OBSOLETE { ERROR_OUT(( "DrvEnableSurface - Failed EngAssociateSurface")); DC_QUIT; } // // We have successfully associated the surface so return it to the GDI. // rc = hsurf; DC_EXIT_POINT: // // Tidy up any resources if we failed. // if (rc == 0) { DrvDisableSurface((DHPDEV) ppdev); } DebugExitPVOID(DrvEnableSurface, rc); return(rc); } // // DrvDisableSurface - see NT DDK documentation // // Free resources allocated by DrvEnableSurface. Release the surface. // // Note that this function will be called when previewing modes in the // Display Applet, but not at system shutdown. If you need to reset the // hardware at shutdown, you can do it in the miniport by providing a // 'HwResetHw' entry point in the VIDEO_HW_INITIALIZATION_DATA structure. // // Note: In an error case, we may call this before DrvEnableSurface is // completely done. // VOID DrvDisableSurface(DHPDEV dhpdev) { LPOSI_PDEV ppdev = (LPOSI_PDEV)dhpdev; DebugEntry(DrvDisableSurface); INIT_OUT(("DrvDisableSurface(dhpdev = 0x%08x)", dhpdev)); if (ppdev->hsurfScreen != 0) { EngDeleteSurface(ppdev->hsurfScreen); } if (ppdev->pdsurfScreen != NULL) { EngFreeMem(ppdev->pdsurfScreen); } DebugExitVOID(DrvDisableSurface); } // // DrvEscape - see NT DDK documentation. // ULONG DrvEscape(SURFOBJ *pso, ULONG iEsc, ULONG cjIn, PVOID pvIn, ULONG cjOut, PVOID pvOut) { ULONG rc = FALSE; LPOSI_ESCAPE_HEADER pHeader; DebugEntry(DrvEscape); TRACE_OUT(("DrvEscape called with escape %d", iEsc)); // // All functions we support use an identifier in the input data to make // sure that we don't try to use another driver's escape functions. If // the identifier is not present, we must not process the request. // // NOTE: This function is NOT protected for shared memory access // because it is responsible for allocating / deallocating the shared // memory. // // // Check the data is long enough to store our standard escape header. // If it is not big enough this must be an escape request for another // driver. // if (cjIn < sizeof(OSI_ESCAPE_HEADER)) { INIT_OUT(("DrvEscape ignoring; input size %04d too small", cjIn)); WARNING_OUT(("DrvEscape ignoring; input size %04d too small", cjIn)); DC_QUIT; } if (cjOut < sizeof(OSI_ESCAPE_HEADER)) { INIT_OUT(("DrvEscape ignoring; output size %04d too small", cjOut)); WARNING_OUT(("DrvEscape ignoring; output size %04d too small", cjOut)); DC_QUIT; } // // Check for our escape ID. If it is not our escape ID this must be an // escape request for another driver. // pHeader = pvIn; if (pHeader->identifier != OSI_ESCAPE_IDENTIFIER) { INIT_OUT(("DrvEscape ignoring; identifier 0x%08x is not for NetMtg", pHeader->identifier)); WARNING_OUT(("DrvEscape ignoring; identifier 0x%08x is not for NetMtg", pHeader->identifier)); DC_QUIT; } else if (pHeader->version != DCS_MAKE_VERSION()) { INIT_OUT(("DrvEscape failing; version 0x%08x of NetMtg is not that of driver", pHeader->version)); WARNING_OUT(("DrvEscape failing; version 0x%08x of NetMtg is not that of driver", pHeader->version)); DC_QUIT; } // // If we haven't initialized yet, fail all other escapes. // if (g_shmMappedMemory == NULL) { if ((iEsc != OSI_ESC_CODE) || (pHeader->escapeFn != OSI_ESC_INIT)) { WARNING_OUT(("DrvEscape failing; driver not initialized")); DC_QUIT; } } // // Everything is tickety boo - process the request. // switch (iEsc) { case OSI_ESC_CODE: { // // This is a request from the share core. Pass it on to the // correct component. // TRACE_OUT(( "Function %ld", pHeader->escapeFn)); if( // (pHeader->escapeFn >= OSI_ESC_FIRST) && Always True (pHeader->escapeFn <= OSI_ESC_LAST ) ) { // // OSI requests. // rc = OSI_DDProcessRequest(pso, cjIn, pvIn, cjOut, pvOut); } else if( (pHeader->escapeFn >= OSI_OE_ESC_FIRST) && (pHeader->escapeFn <= OSI_OE_ESC_LAST ) ) { // // Order Encoder requests. // rc = OE_DDProcessRequest(pso, cjIn, pvIn, cjOut, pvOut); } else if( (pHeader->escapeFn >= OSI_HET_ESC_FIRST) && (pHeader->escapeFn <= OSI_HET_ESC_LAST) ) { // // Non-locking (wnd tracking) HET requests // rc = HET_DDProcessRequest(pso, cjIn, pvIn, cjOut, pvOut); } else if( (pHeader->escapeFn >= OSI_SBC_ESC_FIRST) && (pHeader->escapeFn <= OSI_SBC_ESC_LAST ) ) { // // Send Bitmap Cache requests // rc = SBC_DDProcessRequest(pso, pHeader->escapeFn, pvIn, pvOut, cjOut); } else if( (pHeader->escapeFn >= OSI_SSI_ESC_FIRST) && (pHeader->escapeFn <= OSI_SSI_ESC_LAST ) ) { // // Save Screen Bits requests. // rc = SSI_DDProcessRequest(pHeader->escapeFn, pHeader, cjIn); } else if( (pHeader->escapeFn >= OSI_CM_ESC_FIRST) && (pHeader->escapeFn <= OSI_CM_ESC_LAST ) ) { // // Cursor Manager requests // rc = CM_DDProcessRequest(pso, cjIn, pvIn, cjOut, pvOut); } else if( (pHeader->escapeFn >= OSI_OA_ESC_FIRST) && (pHeader->escapeFn <= OSI_OA_ESC_LAST ) ) { // // Order Accumulator requests. // rc = OA_DDProcessRequest(pHeader->escapeFn, pHeader, cjIn); } else if( (pHeader->escapeFn >= OSI_BA_ESC_FIRST) && (pHeader->escapeFn <= OSI_BA_ESC_LAST ) ) { // // Bounds Accumulator requests. // rc = BA_DDProcessRequest(pHeader->escapeFn, pHeader, cjIn, pvOut, cjOut); } else { WARNING_OUT(( "Unknown function", pHeader->escapeFn)); } } break; case WNDOBJ_SETUP: { if ((pHeader->escapeFn >= OSI_HET_WO_ESC_FIRST) && (pHeader->escapeFn <= OSI_HET_WO_ESC_LAST)) { TRACE_OUT(("WNDOBJ_SETUP Escape code - pass to HET")); rc = HET_DDProcessRequest(pso, cjIn, pvIn, cjOut, pvOut); } else { INIT_OUT(("WNDOBJ_SETUP Escape is unrecognized, ignore")); WARNING_OUT(("WNDOBJ_SETUP Escape is unrecognized, ignore")); } } break; default: { ERROR_OUT(( "Unrecognised request %lu", iEsc)); } break; } DC_EXIT_POINT: DebugExitDWORD(DrvEscape, rc); return(rc); } // // DrvSetPalette - see NT DDK documentation. // BOOL DrvSetPalette(DHPDEV dhpdev, PALOBJ* ppalo, FLONG fl, ULONG iStart, ULONG cColors) { BOOL rc = FALSE; LPOSI_PDEV ppdev = (LPOSI_PDEV)dhpdev; DebugEntry(DrvSetPalette); // // Check that this doesn't hose our palette. Note that NT passes a // zero indexed array element and a count, hence to fill a palette, the // values are 'start at 0 with 256 colours'. Thus a total of 256 is // the maximum for our 8-bit palette. // if (iStart + cColors > OSI_MAX_PALETTE) { ERROR_OUT(("Overflow: start %lu count %lu", iStart, cColors)); DC_QUIT; } // // Fill in the palette // if (cColors != PALOBJ_cGetColors(ppalo, iStart, cColors, (ULONG*)&ppdev->pPal[iStart])) { // // Don't bother tracing the return code - it's always 0. // ERROR_OUT(("Failed to read palette")); DC_QUIT; } // // BOGUS LAURABU! // For NT 5.0, do we need to turn around and reset the contents of // our created palette object with these new color values? Real // display drivers don't (S3 e.g.) // // // Set the flag in the PDEV to indicate that the palette has changed // ppdev->paletteChanged = TRUE; rc = TRUE; DC_EXIT_POINT: DebugExitBOOL(DrvSetPalette, rc); return(rc); } // // DrvGetModes - see NT DDK documentation // // Returns the list of available modes for the device. // As a mirroring driver, we return 0. That will cause NT GRE to use // whatever ChangeDisplaySettingsEx passed along. // ULONG DrvGetModes ( HANDLE hDriver, ULONG cjSize, DEVMODEW* pdm ) { return(0); } // // DrvAssertMode - see NT DDK documentation. // BOOL DrvAssertMode ( DHPDEV dhpdev, BOOL bEnable ) { LPOSI_PDEV ppdev = (LPOSI_PDEV)dhpdev; DebugEntry(DrvAssertMode); INIT_OUT(("DrvAssertMode(dhpdev = 0x%08x, bEnable = %d)", dhpdev, bEnable)); // // Check for fullscreen switching. // if ((g_asSharedMemory != NULL) && (ppdev != NULL)) { g_asSharedMemory->fullScreen = (BOOL)(!bEnable); TRACE_OUT(("Fullscreen is now %d", g_asSharedMemory->fullScreen)); } DebugExitVOID(DrvAssertMode); return(TRUE); } // // Name: OSIInitializeMode // // Purpose: // // Initializes a bunch of fields in the pdev, devcaps (aka gdiinfo), and // devinfo based on the requested mode. // // Returns: // // TRUE - Successfully initialized the data // FALSE - Failed to set up mode data // // Params: // // pgdiRequested - GDI info from the primary display driver (empty in NT 5.0) // pdmRequested - DEVMODE info with GDI's requested settings for our driver // ppdev - Our driver's private copy of settings, values // pgdiReturn - GDI info to return for our driver // pdiReturn - DEVINFO to return for our driver // BOOL OSIInitializeMode ( const GDIINFO* pgdiRequested, const DEVMODEW* pdmRequested, LPOSI_PDEV ppdev, GDIINFO* pgdiReturn, DEVINFO* pdiReturn ) { BOOL rc = FALSE; HPALETTE hpal; ULONG cColors; ULONG iMode; DebugEntry(OSIInitializeMode); INIT_OUT(("DrvEnablePDEV: DEVMODEW requested contains:")); INIT_OUT((" Screen width -- %li", pdmRequested->dmPelsWidth)); INIT_OUT((" Screen height -- %li", pdmRequested->dmPelsHeight)); INIT_OUT((" Bits per pel -- %li", pdmRequested->dmBitsPerPel)); INIT_OUT(("DrvEnablePDEV: DEVINFO parameter contains:")); INIT_OUT((" flGraphicsCaps -- 0x%08x", pdiReturn->flGraphicsCaps)); INIT_OUT((" iDitherFormat -- 0x%08x", pdiReturn->iDitherFormat)); INIT_OUT((" hpalDefault -- 0x%08x", pdiReturn->hpalDefault)); INIT_OUT(("DrvEnablePDEV: GDIINFO (devcaps) parameter contains:")); INIT_OUT((" ULONG ulVersion 0x%08x", pgdiRequested->ulVersion)); INIT_OUT((" ULONG ulHorzSize %d", pgdiRequested->ulHorzSize)); INIT_OUT((" ULONG ulVertSize %d", pgdiRequested->ulVertSize)); INIT_OUT((" ULONG ulHorzRes %d", pgdiRequested->ulHorzRes)); INIT_OUT((" ULONG ulVertRes %d", pgdiRequested->ulVertRes)); INIT_OUT((" ULONG cBitsPixel %d", pgdiRequested->cBitsPixel)); INIT_OUT((" ULONG cPlanes %d", pgdiRequested->cPlanes)); INIT_OUT((" ULONG ulNumColors %d", pgdiRequested->ulNumColors)); INIT_OUT((" ULONG ulDACRed 0x%08x", pgdiRequested->ulDACRed)); INIT_OUT((" ULONG ulDACGreen 0x%08x", pgdiRequested->ulDACGreen)); INIT_OUT((" ULONG ulDACBlue 0x%08x", pgdiRequested->ulDACBlue)); INIT_OUT((" ULONG ulHTOutputFormat %d", pgdiRequested->ulHTOutputFormat)); // // Fill in the GDIINFO we're returning with the info for our driver. // First, copy the default settings. // *pgdiReturn = s_osiDefaultGdi; // // Second, update the values that vary depending on the requested // mode and color depth. // pgdiReturn->ulHorzRes = pdmRequested->dmPelsWidth; pgdiReturn->ulVertRes = pdmRequested->dmPelsHeight; pgdiReturn->ulVRefresh = pdmRequested->dmDisplayFrequency; pgdiReturn->ulLogPixelsX = pdmRequested->dmLogPixels; pgdiReturn->ulLogPixelsY = pdmRequested->dmLogPixels; // // If this is NT 4.0 SP-3, we get passed in the original GDIINFO of // the real display. If not, we need to fake up one. // if (pgdiRequested->cPlanes != 0) { // // Now overwrite the defaults with the relevant information returned // from the kernel driver: // pgdiReturn->cBitsPixel = pgdiRequested->cBitsPixel; pgdiReturn->cPlanes = pgdiRequested->cPlanes; pgdiReturn->ulDACRed = pgdiRequested->ulDACRed; pgdiReturn->ulDACGreen = pgdiRequested->ulDACGreen; pgdiReturn->ulDACBlue = pgdiRequested->ulDACBlue; } else { pgdiReturn->cBitsPixel = pdmRequested->dmBitsPerPel; pgdiReturn->cPlanes = 1; switch (pgdiReturn->cBitsPixel) { case 8: pgdiReturn->ulDACRed = pgdiReturn->ulDACGreen = pgdiReturn->ulDACBlue = 8; break; case 24: pgdiReturn->ulDACRed = 0x00FF0000; pgdiReturn->ulDACGreen = 0x0000FF00; pgdiReturn->ulDACBlue = 0x000000FF; break; default: ERROR_OUT(("Invalid color depth in NT 5.0 mirror driver")); DC_QUIT; break; } } // // Now save private copies of info we're returning to GDI // ppdev->cxScreen = pgdiReturn->ulHorzRes; ppdev->cyScreen = pgdiReturn->ulVertRes; ppdev->cBitsPerPel = pgdiReturn->cBitsPixel * pgdiReturn->cPlanes; if (ppdev->cBitsPerPel == 15) ppdev->cBitsPerPel = 16; ppdev->flRed = pgdiReturn->ulDACRed; ppdev->flGreen = pgdiReturn->ulDACGreen; ppdev->flBlue = pgdiReturn->ulDACBlue; // // Fill in the devinfo structure with the default 8bpp values, taking // care not to trash the supplied hpalDefault (which allows us to // query information about the real display driver's color format). // // On NT 5.0, we don't get passed on the screen palette at all, we need // to create our own. // hpal = pdiReturn->hpalDefault; *pdiReturn = s_osiDefaultDevInfo; switch (pgdiReturn->cBitsPixel * pgdiReturn->cPlanes) { case 4: { // // NT 4.0 SP-3 ONLY // pgdiReturn->ulNumColors = 16; pgdiReturn->ulNumPalReg = 0; pgdiReturn->ulHTOutputFormat = HT_FORMAT_4BPP; pdiReturn->flGraphicsCaps &= ~GCAPS_PALMANAGED; pdiReturn->iDitherFormat = BMF_4BPP; ppdev->iBitmapFormat = BMF_4BPP; cColors = 16; goto AllocPalEntries; } break; case 8: { pgdiReturn->ulNumColors = 20; pgdiReturn->ulNumPalReg = 256; pdiReturn->iDitherFormat = BMF_8BPP; ppdev->iBitmapFormat = BMF_8BPP; cColors = 256; AllocPalEntries: // // Alloc memory for the palette entries. // ppdev->pPal = EngAllocMem( FL_ZERO_MEMORY, sizeof(PALETTEENTRY) * cColors, OSI_ALLOC_TAG ); if (ppdev->pPal == NULL) { ERROR_OUT(("Failed to allocate palette memory")); DC_QUIT; } } break; case 15: case 16: { // // NT 4.0 SP-3 ONLY // pgdiReturn->ulHTOutputFormat = HT_FORMAT_16BPP; pdiReturn->flGraphicsCaps &= ~(GCAPS_PALMANAGED | GCAPS_COLOR_DITHER); pdiReturn->iDitherFormat = BMF_16BPP; ppdev->iBitmapFormat = BMF_16BPP; } break; case 24: { // // DIB conversions will only work if we have a standard RGB // surface for 24bpp. // pgdiReturn->ulHTOutputFormat = HT_FORMAT_24BPP; pdiReturn->flGraphicsCaps &= ~(GCAPS_PALMANAGED | GCAPS_COLOR_DITHER); pdiReturn->iDitherFormat = BMF_24BPP; ppdev->iBitmapFormat = BMF_24BPP; } break; case 32: { // // NT 4.0 SP-3 ONLY // pgdiReturn->ulHTOutputFormat = HT_FORMAT_32BPP; pdiReturn->flGraphicsCaps &= ~(GCAPS_PALMANAGED | GCAPS_COLOR_DITHER); pdiReturn->iDitherFormat = BMF_32BPP; ppdev->iBitmapFormat = BMF_32BPP; } break; default: { // // Unsupported bpp - pretend we are 8 bpp. // ERROR_OUT(("Unsupported bpp value: %d", pgdiReturn->cBitsPixel * pgdiReturn->cPlanes)); DC_QUIT; } break; } if (!hpal) { // // This is NT 5.0. We need to create a palette, either an 8bpp // indexed one, or a 24bpp bitfield one. // if (ppdev->iBitmapFormat == BMF_8BPP) { ULONG ulLoop; // // We have to initialize the fixed part (top 10 and bottom 10) // of the palette entries. // for (ulLoop = 0; ulLoop < 10; ulLoop++) { // First 10 ppdev->pPal[ulLoop] = s_aWinColors[ulLoop]; // Last 10 ppdev->pPal[256 - 10 + ulLoop] = s_aWinColors[ulLoop + 10]; } // Create the palette from the entries. hpal = EngCreatePalette(PAL_INDEXED, 256, (ULONG*)ppdev->pPal, 0, 0, 0); // // Set the flag in the PDEV to indicate that the palette has // changed. // ppdev->paletteChanged = TRUE; } else { ASSERT(ppdev->iBitmapFormat == BMF_24BPP); hpal = EngCreatePalette(PAL_BITFIELDS, 0, NULL, ppdev->flRed, ppdev->flGreen, ppdev->flBlue); } ppdev->hpalCreated = hpal; if (!hpal) { ERROR_OUT(("DrvEnablePDEV: could not create DEVINFO palette")); DC_QUIT; } } else { // // This is NT 4.0 SP-3. Get the real bitmasks for > 8 bpp and // the current palette colors for <= 8 bpp. // if (pgdiReturn->cBitsPixel <= 8) { if (ppdev->iBitmapFormat == BMF_4BPP) { ASSERT(cColors == 16); } else { ASSERT(cColors == 256); } if (cColors != EngQueryPalette(hpal, &iMode, cColors, (ULONG *)ppdev->pPal)) { ERROR_OUT(("Failed to query current display palette")); } // // Set the flag in the PDEV to indicate that the palette has // changed. // ppdev->paletteChanged = TRUE; } else { ULONG aulBitmasks[3]; // // Query the true color bitmasks. // cColors = EngQueryPalette(hpal, &iMode, sizeof(aulBitmasks) / sizeof(aulBitmasks[0]), &aulBitmasks[0] ); if (cColors == 0) { ERROR_OUT(("Failed to query real bitmasks")); } if (iMode == PAL_INDEXED) { ERROR_OUT(("Bitmask palette is indexed")); } // // Get the real bitmasks for NT 4.0 SP-3 displays since we // get the same info the real global display does, and we need // to parse the bits in BitBlts, color tanslations, etc. // ppdev->flRed = aulBitmasks[0]; ppdev->flGreen = aulBitmasks[1]; ppdev->flBlue = aulBitmasks[2]; } } pdiReturn->hpalDefault = hpal; rc = TRUE; INIT_OUT(("DrvEnablePDEV: Returning bitmasks of:")); INIT_OUT((" red %08x", ppdev->flRed)); INIT_OUT((" green %08x", ppdev->flGreen)); INIT_OUT((" blue %08x", ppdev->flBlue)); DC_EXIT_POINT: DebugExitBOOL(OSIInitializeMode, rc); return(rc); } // // FUNCTION: OSI_DDProcessRequest // // DESCRIPTION: // // Called by the display driver to process an OSI specific request // // PARAMETERS: pso - pointer to surface object // cjIn - (IN) size of request block // pvIn - (IN) pointer to request block // cjOut - (IN) size of response block // pvOut - (OUT) pointer to response block // // RETURNS: None // // ULONG OSI_DDProcessRequest(SURFOBJ* pso, UINT cjIn, void * pvIn, UINT cjOut, void * pvOut) { ULONG rc; LPOSI_ESCAPE_HEADER pHeader; LPOSI_PDEV ppdev = (LPOSI_PDEV)pso->dhpdev; DebugEntry(OSI_DDProcessRequest); // // Get the request number. // pHeader = pvIn; switch (pHeader->escapeFn) { case OSI_ESC_INIT: { TRACE_OUT(("DrvEscape: OSI_ESC_INIT")); ASSERT(cjOut == sizeof(OSI_INIT_REQUEST)); // // Get shared memory block // OSI_DDInit(ppdev, (LPOSI_INIT_REQUEST)pvOut); rc = TRUE; } break; case OSI_ESC_TERM: { TRACE_OUT(("DrvEscape: OSI_ESC_TERM")); ASSERT(cjIn == sizeof(OSI_TERM_REQUEST)); // // Cleanup, NM is going away // OSI_DDTerm(ppdev); rc = TRUE; } break; case OSI_ESC_SYNC_NOW: { TRACE_OUT(("DrvEscape: OSI_ESC_SYNC_NOW")); ASSERT(cjIn == sizeof(OSI_ESCAPE_HEADER)); // // Resync with the 32-bit ring 3 core. This happens when // somebody joins or leaves a share. // BA_ResetBounds(); OA_DDSyncUpdatesNow(); SBC_DDSyncUpdatesNow(ppdev); rc = TRUE; } break; default: { ERROR_OUT(("Unrecognised request %lu", pHeader->escapeFn)); rc = FALSE; } break; } DebugExitBOOL(OSI_DDProcessRequest, rc); return(rc); } // // Function: OSI_DDInit // // Description: Map the shared memory into Kernel and User space // // Parameters: count - size of the buffer to return to user space // pData - pointer to the buffer to be returned to user space // // Returns: (none) // void OSI_DDInit(LPOSI_PDEV ppdev, LPOSI_INIT_REQUEST pResult) { DWORD memRemaining; LPBYTE pBuffer; LPVOID shmMappedMemory; VIDEO_SHARE_MEMORY ShareMemory; VIDEO_SHARE_MEMORY_INFORMATION ShareMemoryInformation; DWORD ReturnedDataLength; DebugEntry(OSI_DDInit); // Init to FALSE pResult->result = FALSE; // Initialize these to NULL pResult->pSharedMemory = NULL; pResult->poaData[0] = NULL; pResult->poaData[1] = NULL; pResult->sbcEnabled = FALSE; // // Check that the memory is available to the driver and that we are not // in a race condition. // if (g_asSharedMemory == NULL) { ERROR_OUT(("No memory available")); DC_QUIT; } if (g_shmMappedMemory != NULL) { // // We will never come in here with two copies of NetMeeting running. // The UI code prevents the second instance from starting long // before app sharing is in the picture. Therefore, these are the // only possibilities: // // (1) Previous version is almost shutdown but hasn't called OSI_DDTerm // yet and new version is starting up and calls OSI_DDInit // // (2) Previous version terminated abnormally and never called // OSI_DDTerm(). This code handles the second case. The first one // is handled by the same code in the UI that prevents two copies // from starting around the same time. // WARNING_OUT(("OSI_DDInit: NetMeeting did not shutdown cleanly last time")); OSI_DDTerm(ppdev); } // // Map the shared section into the caller's process. // INIT_OUT(("OSI_DDInit: Mapping 0x%08x bytes of kernel memory at 0x%08x into caller process", g_shmSharedMemorySize, g_asSharedMemory)); ShareMemory.ProcessHandle = LongToHandle(-1); ShareMemory.ViewOffset = 0; ShareMemory.ViewSize = g_shmSharedMemorySize; ShareMemory.RequestedVirtualAddress = NULL; if (EngDeviceIoControl(ppdev->hDriver, IOCTL_VIDEO_SHARE_VIDEO_MEMORY, &ShareMemory, sizeof(VIDEO_SHARE_MEMORY), &ShareMemoryInformation, sizeof(VIDEO_SHARE_MEMORY_INFORMATION), &ReturnedDataLength) != 0) { ERROR_OUT(("Failed to map shared memory into calling process")); DC_QUIT; } // // USER MODE pointer (not valid in kernel mode) // INIT_OUT(("OSI_DDInit: Mapped 0x%08x bytes of kernel memory to user memory 0x%08x", g_shmSharedMemorySize, ShareMemoryInformation.VirtualAddress)); shmMappedMemory = ShareMemoryInformation.VirtualAddress; pResult->pSharedMemory = shmMappedMemory; pResult->poaData[0] = ((LPSHM_SHARED_MEMORY)pResult->pSharedMemory) + 1; pResult->poaData[1] = ((LPOA_SHARED_DATA)pResult->poaData[0]) + 1; TRACE_OUT(("Shared memory %08lx %08lx %08lx", pResult->pSharedMemory, pResult->poaData[0], pResult->poaData[1])); // // Clear out the shared memory, so it's ready for immediate use. // NOTE THAT THIS SETS ALL VALUES TO FALSE. // NOTE ALSO THAT THIS CLEARS the two OA_SHARED_DATAs also // RtlFillMemory(g_asSharedMemory, SHM_SIZE_USED, 0); g_asSharedMemory->displayToCore.indexCount = 0; // // Set up our pointer to the variable part of the shared memory i.e. // the part which is not used for the SHM_SHARED_MEMORY structure // We must skip past g_asSharedMemory, two CM_FAST_DATA structs, and // two OA_SHARED_DATA structs. // pBuffer = (LPBYTE)g_asSharedMemory; pBuffer += SHM_SIZE_USED; memRemaining = g_shmSharedMemorySize - SHM_SIZE_USED; // // Initialise the other components required for DC-Share // // // Bounds accumulation // BA_DDInit(); // // Cursor // if (!CM_DDInit(ppdev)) { ERROR_OUT(("CM failed to init")); DC_QUIT; } // // Send Bitmap Cache // NOTE that if it initializes OK but no caching allowed, we will continue. // // This will fill in the tile buffers & info. If no SBC caching allowed, // the sbcEnabled field will be FALSE. // if (SBC_DDInit(ppdev, pBuffer, memRemaining, pResult)) { pResult->sbcEnabled = TRUE; } // // Mark memory as ready to use. // g_shmMappedMemory = shmMappedMemory; pResult->result = TRUE; DC_EXIT_POINT: DebugExitVOID(OSI_DDInit); } // // Function: OSI_DDTerm // // Description: Cleanup when NM shuts down // // Returns: (none) // void OSI_DDTerm(LPOSI_PDEV ppdev) { DebugEntry(OSI_DDTerm); // // Check for a valid address - must be non-NULL. // if (!g_asSharedMemory) { ERROR_OUT(("Invalid memory")); DC_QUIT; } // // Terminate the dependent components. // // // Hosted Entity Tracker // HET_DDTerm(); // // Order Encoding // OE_DDTerm(); // // Send Bitmap Cache // SBC_DDTerm(); // // Cursor manager. // CM_DDTerm(); // // The shared memory will be unmapped automatically in this process // by OS cleanup, in both NT4 and NT5 // g_shmMappedMemory = NULL; DC_EXIT_POINT: DebugExitVOID(OSI_DDTerm); }