[nls] ; ; These values are used by setupldr when starting text setup ; and by text setup to initialize nls values in the registry. ; ; For the codepage and UnicodeCasetable entries, the values are ; , pairs. Setupldr uses the first ; as the file to load for use during text setup. ; AnsiCodepage = c_1250.nls,1250 OemCodepage = c_852.nls,852,c_437.nls,437 MacCodepage = c_10029.nls,10029 UnicodeCasetable = l_intl.nls,0405 OemHalFont = vga852.fon DefaultLayout = 00000405 [Keyboard] STANDARD = "Kl vesnice XT, AT, Ÿi vylepçen  (83-104 kl ves)",files.i8042,i8042prt kbdhid = "Kl vesnice USB",files.kbdhid,kbdhid @i:USB = "Kl vesnice USB",files.kbdhid,kbdhid @m:none = "Bez kl vesnice",files.none,"" [Files.BackupOnUpgrade] [Files.BackupOnOverwrite] [SystemPartitionFiles] @i:@@:bootfont.bin,"\" @a:@@:bootfont.bin,"\" ; ; This section provides information about hard disk drivers. ; ; The left hand side is a name in the \Driver directory in the NT ; \Driver object namespace. ; ; Value #0 is a format string used in creating the descriptive name ; of the disk. ; [DiskDriverMap] abiosdsk = "Disk: %1!u! MB Micro Channel" atdisk = "Disk: %1!u! MB IDE/ESDI" disk = "Disk: %1!u! MB, %2!u!, ID=%3!u!, sbØrnice=%4!u! (na %5)" [ScsiClass] cdrom = "Jednotka CD-ROM SCSI" floppy = "Disketov  jednotka SCSI " disk = "Disk SCSI" ramdisk = "OvladaŸ disku RAM" [FileSystems] fat = "Syst‚m soubor… FAT" ntfs = "Syst‚m soubor… syst‚mu Windows NT (NTFS)" ksecdd = "Poskytovatel zabezpeŸen¡ j dra" [FloppyDrivers] floppy = "Standardn¡ disketa" fat = "Syst‚m soubor… FAT" [SystemPartitionFiles] @i:@@:Bootfont.bin,"\" [CdRomDrivers] cdfs = "Syst‚m soubor… CD-ROM" [MouseDrivers] mouclass = "OvladaŸ tý¡dy Myç" mouhid = "OvladaŸ filtru Myçi standardu HID" ; Font list ; ; Setup will create an entry in the [Fonts] section of win.ini ; for each of the following fonts. (Fonts copied during GUI setup ; have entries in [FontList] in a gui inf file -- see eng_ansi.txt.) ; Note that the [fonts] section of win.ini is shadowed into ; HEKY_LOCAL_MACHINE\software\Microsoft\Windows NT\CurrentVersion\Fonts. ; [FontListE] "Courier 10,12,15 (VGA res)" = COUREE.FON "MS Sans Serif 8,10,12,14,18,24 (VGA res)" = SSERIFEE.FON "MS Serif 8,10,12,14,18,24 (VGA res)" = SERIFEE.FON "Tahoma (TrueType)" = TAHOMA.TTF "Microsoft Sans Serif (TrueType)" = MICROSS.TTF @*: @*: If add a keyboard layout dll description here make sure @*: that you add the layout dll file name in [CmdConsFiles] @*: section in dosnet.inf also, so that when command console @*: is installed on the harddisk that particular layout file @*: can be copied @*: ["Keyboard Layout"] 0000041C = "Alb nsk‚" 00000809 = "Anglick‚ (britsk‚, severoirsk‚)" 00001009 = "Anglick‚ (Kanada, v¡cejazyŸn‚)" 00000409 = "Anglick‚ (Spojen‚ st ty)" 00030409 = "Anglick‚ (Spojen‚ st ty - Dvorak pro lev ky)" 00040409 = "Anglick‚ (Spojen‚ st ty - Dvorak pro prav ky)" 00010409 = "Anglick‚ (Spojen‚ st ty - Dvorak)" 00020409 = "Anglick‚ (Spojen‚ st ty - mezin rodn¡)" 00000423 = "BØlorusk‚" 00000416 = "Brazilsk‚ (ABNT)" 00010402 = "Bulharsk‚ (latinka)" 00000402 = "Bulharsk‚" 00010405 = "¬esk‚ (QWERTY)" 00000405 = "¬esk‚" 00000406 = "D nsk‚" 00000425 = "Estonsk‚" 0000040B = "Finsk‚" 0000080C = "Francouzsk‚ (Belgie)" 00000C0C = "Francouzsk‚ (Kanada)" 00010C0C = "Francouzsk‚ (Kanada, v¡cejazyŸn‚)" 0000100C = "Francouzsk‚ (ævìcarsko)" 0000040C = "Francouzsk‚" 00000813 = "Holandsk‚ (Belgie)" 00000413 = "Holandsk‚" 0000041a = "Chorvatsk‚" 00001809 = "Irsk‚" 0000040F = "Islandsk‚" 00010410 = "Italsk‚ (142)" 00000410 = "Italsk‚" 0000080A = "Latinsko-americk‚" 00000427 = "Litevsk‚" 00010426 = "Lotyçsk‚ (QWERTY)" 00000426 = "Lotyçsk‚" 0001040E = "MaÔarsk‚ (101 kl ves)" 0000040E = "MaÔarsk‚" 00010407 = "NØmeck‚ (IBM)" 00000807 = "NØmeck‚ (ævìcarsko)" 00000407 = "NØmeck‚" 00000414 = "Norsk‚" 00010415 = "Polsk‚ (214)" 00000415 = "Polsk‚ (program torsk‚)" 00000816 = "Portugalsk‚" 00000418 = "Rumunsk‚" 00010419 = "Rusk‚ (psac¡ stroj)" 00000419 = "Rusk‚" 00010408 = "üeck‚ (220)" 00030408 = "üeck‚ (220, latinka)" 00020408 = "üeck‚ (319)" 00040408 = "üeck‚ (319, latinka)" 00050408 = "üeck‚ (latinka)" 00000408 = "üeck‚" 0001041B = "Slovensk‚ (QWERTY)" 0000041B = "Slovensk‚" 00000424 = "Slovinsk‚" 00000C1A = "Srbsk‚ (cyrilice)" 00010C1A = "Srbsk‚ (latinka)" 0001040A = "æpanØlsk‚ (variace)" 0000040A = "æpanØlsk‚" 0000041D = "æv‚dsk‚" 0001041F = "Tureck‚ (typ F)" 0000041F = "Tureck‚ (typ Q)" 00000422 = "Ukrajinsk‚" [DiskDrivers] dmboot = "Podpora dynamick‚ spr vy svazk… (dmboot)" i2omgmt = "Intelligent I/O Support Driver" [InputDevicesSupport] usbehci = "Enhanced Host Controller",files.usbehci,usbehci usbohci = "üadiŸ otevýen‚ho hostitele",files.usbohci,usbohci usbuhci = "üadiŸ univers ln¡ho hostitele",files.usbuhci,usbuhci usbhub = "OvladaŸ obecn‚ho rozboŸovaŸe USB",files.usbhub,usbhub hidusb = "Analyz tor lidsk‚ho rozhran¡",files.hidusb,hidusb serial = "OvladaŸ s‚riov‚ho portu",files.none,serial serenum = "VyŸ¡slovaŸ s‚riov‚ho portu",files.none,serenum usbstor = "OvladaŸ USB Storage Class",files.usbstor,usbstor usbccgp = "Obecnì nadýazenì ovladaŸ USB",files.usbccgp,usbccgp wd = "Microsoft Watchdog Timer Driver",files.wd,wd [SCSI] @i:sparrow = "Adaptec AHA-151X/AHA-152X/AIC-6X60 SCSI Adapter" @i:aha154x = "Adaptec AHA-154X/AHA-164X SCSI Host Adapter" aic78xx = "Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller" aic78u2 = "Adaptec AHA-294XU2/AIC-7890 SCSI Controller" adpu160m = "Adaptec AIC-789X/AHA-3960 Ultra160 PCI SCSI Card" adpu320 = "Adaptec Ultra320 Family SCSI Controller" afcnt = "Agilent HHBA-510x PCI Fibre Channel Controller" dpti2o = "Adaptec 2000S/3000S Ultra160 SCSI RAID Controller" @i:asc3550 = "Advansys 3550 Ultra Wide SCSI Host Adapter" @i:asc3350p = "Advansys ABP460 PCMCIA SCSI Host Adapter" @i:abp480n5 = "Advansys ABP480 CardBus SCSI Host Adapter" @i:asc = "Advansys SCSI Host Adapter" @i:amsint = "AMD PCI SCSI Controller/Ethernet Adapter" mraid35x = "AMI MegaRaid RAID Controller" @i:cpqarray = "Compaq Drive Array" cpqfcalm = "Compaq Fibre Channel Host Controller" cpqarry2 = "Compaq Smart Array Controller" cpqcissm = "Compaq Smart Array 5300 Controller" lp6nds35 = "Emulex LP6000 Fibre Channel Host Adapters" @i:cd20xrnt = "IBM Portable PCMCIA CD-ROM Drive" @i:ipsraidn = "IBM ServeRAID Adapter" nfrd960 = "IBM ServeRAID Adapter" @i:i2omp = "Intelligent I/O Controller" @i:iirsp = "Intel RAID Adapter" atapi = "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" cbidf2k = "CardBus/PCMCIA IDE Miniport Driver" @i:ini910u = "Initio Ultra SCSI Host Adapter" @i:dac2w2k = "Mylex EXR2000,3000/AR160,170,352 Raid Controllers" dac960nt = "Mylex DAC960/Digital SWXCR-Ex Raid Controller" @i:dellcerc = "DELL CERC ATA 100/4ch RAID Controller" @i:ultra = "Promise Technology Inc. Ultra IDE Controller" @i:hpt3xx = "HighPoint RAID Controller" ql1240 = "QLogic ISP 1240 SCSI Host Adapter" ql10wnt = "QLogic PCI SCSI Host Adapter" ql1080 = "Qlogic QLA1080, 64 bit PCI LVD SCSI HBA" ql1280 = "Qlogic QLA1280, 64 bit PCI LVD SCSI HBA" ql12160 = "QLogic QLA12160, 64 bit PCI DUAL 160M SCSI HBA" ql2100 = "QLogic QLA2000/QLA2100 PCI Fibre Channel Adapter" ql2200 = "QLogic QLA2200 PCI Fibre Channel Adapter" ql2300 = "QLogic QLA2300 PCI Fibre Channel Adapter" sym_hi = "LSI Logic C896 PCI SCSI Host Adapter" sym_u3 = "LSI Logic C1010 PCI SCSI Host Adapter" @i:symc810 = "LSI Logic C8100 PCI SCSI Host Adapter" symc8xx = "LSI Logic C8xx PCI SCSI Host Adapter" symmpi = "LSI Logic PCI Fibre Channel Host Adapter" hpn = "Hewlett Packard NetRAID-4M RAID Controller" perc2 = "Dell PERC 2/3 RAID Controller" perc2gat = "Dell PERC 2/3 RAID Controller (Gatling)" [BootBusExtenders] pci = "OvladaŸ sbØrnice PCI",files.pci,pci acpi = "OvladaŸ sbØrnice ACPI Plug & Play",files.acpi,acpi isapnp = "OvladaŸ sbØrnice ISA Plug & Play",files.isapnp,isapnp acpiec = "OvladaŸ zapouzdýen‚ho ýadiŸe ACPI",files.none,acpiec ohci1394 = "OvladaŸ portu odpov¡daj¡c¡ho normØ IEEE 1394 Bus OHCI",files.ohci1394,ohci1394 [BusExtenders] pcmcia = "Podpora PCMCIA",files.pcmcia,pcmcia pciide = "OvladaŸ sbØrnice PCI IDE",files.pciide,pciide intelide = "OvladaŸ sbØrnice IDE Intel",files.intelide,intelide viaide = "VIA IDE Bus Driver",files.viaide,viaide cmdide = "CMD IDE Bus Driver",files.cmdide,cmdide toside = "Toshiba IDE Bus Driver",files.toside,toside aliide = "ALI IDE Bus Driver",files.aliide,aliide mountmgr = "Spr vce Mount Point",files.none,mountmgr ftdisk = "Spr vce hlasitosti",files.none,ftdisk partmgr = "Spr vce odd¡l…",files.none,partmgr volsnap = "Volume Shadow Copy Manager",files.none,volsnap fdc = "Podpora disketov‚ jednotky",files.none,fdc dmload = "Podpora dynamick‚ spr vy svazk… (dmload)",files.none,dmload dmio = "Podpora dynamick‚ spr vy svazk… (dmio)",files.none,dmio sbp2port = "OvladaŸ portu odpov¡daj¡c¡ho normØ IEEE 1394 SBP2 Storage Port", files.sbp2port,sbp2port [Computer] @i:acpiapic_mp = "ACPI v¡ceprocesorovì",files.none @i:acpiapic_up = "ACPI jednoprocesorovì",files.none @a:acpiapic_mp = "ACPI Multiprocessor x86-64",files.none @a:acpiapic_up = "ACPI Uniprocessor x86-64",files.none @i:acpipic_up = "PC s rozhran¡m ACPI",files.none @i:mps_up = "Jednoprocesorovì poŸ¡taŸ PC MPS",files.none @i:mps_mp = "V¡ceprocesorovì poŸ¡taŸ PC MPS",files.none @i:e_isa_up = "Standardn¡ poŸ¡taŸ PC",files.none @m:acpipic_up = "ACPI jednoprocesorovì ia64",files.none @m:acpipic_mp = "ACPI v¡ceprocesorovì ia64",files.none [Display] @i:forcevga = "Standardn¡ VGA (640x480, 16 barev)",files.none @i:vga = "Autodetekce",files.none @@!i:vga = "VGA kompatibiln¡",files.none @i:sglfb = "Cobalt",files.sglfb [Mouse] @i:msps2 = "Myç Microsoft, port myçi (vŸetnØ myçi BallPoint)",files.i8042,i8042prt @i:lgps2 = "Myç Logitech, port myçi",files.i8042,i8042prt @i:msbpser = "Myç Microsoft BallPoint, s‚riovì port",files.sermouse,sermouse @i:lgser = "Myç Logitech, s‚riovì port",files.sermouse,sermouse @@:none = "¦ dn  myç ani jin‚ polohovac¡ zaý¡zen¡",files.none,"" @@:mouhid = "Myç USB",files.mouhid,mouhid @@:msser = "Myç Microsoft, s‚riovì port",files.sermouse,sermouse @@:ps2 = "Myç, port myçi",files.i8042,i8042prt @@:sermouse = "Myç, s‚riovì port",files.sermouse,sermouse @i:USB = "Myç USB",files.mouhid,mouhid @*: COMPAT: we purposely put two strings section in txtsetup.sif @*: The problem is that setupapi only reads strings from the first @*: strings section it encounters. Since older versions of the OS @*: accidentally had multiple Strings sections in the past, we make @*: Whistler have multiple strings sections so that older applications @*: (like win2k risetup) can read this file without requiring any change @*: The only string that risetup specifically cares about is whatever @*: LoadIdentifier points at, so you can probably safely add new strings @*: to this section. @*: @*: @*: The first strings section comes another one of the files that @*: builds txtsetup.sif [Strings] @@!m:@w!p:wks_id = "Microsoft Windows XP Professional" @a:@w!p:wks_id = "Windows XP 64-Bit 2003" @m:@w!p:wks_id = "Windows XP 64-Bit 2003" @@:@p:wks_id = "Microsoft Windows XP Home Edition" @@:@s!e!b!l:srv_id = "Windows Server 2003, Standard" @@:@e!d:srv_id = "Windows Server 2003, Enterprise" @@:@d:srv_id = "Windows Server 2003, Datacenter" @@:@b:srv_id = "Windows Server 2003, Web" @@:@l:srv_id = "Windows Server 2003 for Small Business Server" @@!m:@w!p:wks_id_vga = "Microsoft Windows XP Professional [Re'im VGA]" @a:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [Re'im VGA]" @m:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [Re'im VGA]" @@:@p:wks_id_vga = "Microsoft Windows XP Home Edition [Re'im VGA]" @@:@s!e!b!l:srv_id_vga = "Windows Server 2003, Standard [Re'im VGA]" @@:@e!d:srv_id_vga = "Windows Server 2003, Enterprise [Re'im VGA]" @@:@d:srv_id_vga = "Windows Server 2003, Datacenter [Re'im VGA]" @@:@b:srv_id_vga = "Windows Server 2003, Web [Re'im VGA]" @@:@l:srv_id_vga = "Windows Server 2003 for Small Business Server [Re'im VGA]" @@:@w:cancel_id = "Zrugit instalaci systmu Windows XP" @@:@w:9x_id = "Microsoft Windows"