[nls] ; ; These values are used by setupldr when starting text setup ; and by text setup to initialize nls values in the registry. ; ; For the codepage and UnicodeCasetable entries, the values are ; , pairs. Setupldr uses the first ; as the file to load for use during text setup. ; AnsiCodepage = c_1252.nls,1252 OemCodepage = c_850.nls,850,c_437.nls,437 MacCodepage = c_10000.nls,10000 UnicodeCasetable = l_intl.nls,0816 OemHalFont = vga850.fon DefaultLayout = 00000816 [Keyboard] STANDARD = "XT, AT ou teclado avan‡ado (83-104 teclas)",files.i8042,i8042prt kbdhid = "Teclado USB",files.kbdhid,kbdhid @i:USB = "Teclado USB",files.kbdhid,kbdhid @m:none = "No Keyboard",files.none,"" [Files.BackupOnUpgrade] [Files.BackupOnOverwrite] [SystemPartitionFiles] @i:@@:bootfont.bin,"\" @a:@@:bootfont.bin,"\" ; ; This section provides information about hard disk drivers. ; ; The left hand side is a name in the \Driver directory in the NT ; \Driver object namespace. ; ; Value #0 is a format string used in creating the descriptive name ; of the disk. ; [DiskDriverMap] abiosdsk = "Disco Micro Channel %1!u! MB" atdisk = "Disco IDE/ESDI %1!u! MB" disk = "Disco %2!u! de %1!u! MB no Id %3!u! no barramento %4!u! em %5" [ScsiClass] cdrom = "SCSI CD-ROM" floppy = "Disquete SCSI" disk = "Disco SCSI" ramdisk = "Controlador de disco de RAM" [FileSystems] fat = "Sistema de ficheiros FAT" ntfs = "Sistema de ficheiros do Windows NT (NTFS)" ksecdd = "Fornecedor de seguran‡a do Kernel" [FloppyDrivers] floppy = "Disquete padrão" fat = "Sistema de ficheiros FAT" [SystemPartitionFiles] @i:@@:Bootfont.bin,"\" [CdRomDrivers] cdfs = "Sistema de ficheiros de CD-ROM" [MouseDrivers] mouclass = "Controlador de classe de rato" mouhid = "Controlador de filtro de rato HID" ; ; Font list ; ; Setup will create an entry in the [Fonts] section of win.ini ; for each of the following fonts. (Fonts copied during GUI setup ; have entries in [FontList] in a gui inf file -- see eng_ansi.txt.) ; Note that the [fonts] section of win.ini is shadowed into ; HEKY_LOCAL_MACHINE\software\Microsoft\Windows NT\CurrentVersion\Fonts. ; [FontListE] "Courier 10,12,15 (VGA res)" = COURE.FON "MS Sans Serif 8,10,12,14,18,24 (VGA res)" = SSERIFE.FON "MS Serif 8,10,12,14,18,24 (VGA res)" = SERIFE.FON "Tahoma (TrueType)" = TAHOMA.TTF "Microsoft Sans Serif (TrueType)" = MICROSS.TTF @*: @*: If add a keyboard layout dll description here make sure @*: that you add the layout dll file name in [CmdConsFiles] @*: section in dosnet.inf also, so that when command console @*: is installed on the harddisk that particular layout file @*: can be copied @*: ["Keyboard Layout"] 0000041C = "Albanˆs" 00000423 = "Bielo-russo" 00000813 = "Holandˆs (B‚lgica)" 0000080C = "Holandˆs (Fran‡a)" 00000416 = "Brasileiro (ABNT)" 00000402 = "B£lgaro" 00010402 = "B£lgaro (latim)" 00001009 = "Inglˆs (Canad  - multilingue)" 00000C0C = "Francˆs (Canad )" 00010C0C = "Francˆs (Canad  - multilingue)" 0000041a = "Croata" 00000405 = "Checo" 00010405 = "Checo (QWERTY)" 00000406 = "Dinamarquˆs" 00000413 = "Holandˆs" 00000425 = "Est¢nio" 0000040B = "Finlandˆs" 0000040C = "Francˆs" 00000407 = "Alemao" 00010407 = "Alemao (IBM)" 00000408 = "Grego" 00050408 = "Grego (latim)" 00010408 = "Grego (220)" 00030408 = "Grego (220) (latim)" 00020408 = "Grego (319)" 00040408 = "Grego (319) (latim)" 0000040E = "H£ngaro" 0001040E = "H£ngaro 101-teclas" 0000040F = "Islandˆs" 00001809 = "Irlandˆs" 00000410 = "Italiano" 00010410 = "Italiano (142)" 0000080A = "Latino-Americano" 00000426 = "Letao" 00010426 = "Letao (QWERTY)" 00000427 = "Lituano" 00000414 = "Norueguˆs" 00000415 = "Polaco (programadores)" 00010415 = "Polaco (214)" 00000816 = "Portuguˆs" 00000418 = "Romeno" 00000419 = "Russo" 00010419 = "Russo (m q. de escrever)" 00000C1A = "S‚rvio (cir¡lico) " 00010C1A = "S‚rvio (latim)" 0000041B = "Eslovaco" 0001041B = "Eslovaco (QWERTY)" 00000424 = "Esloveno" 0000040A = "Espanhol" 0001040A = "Varia‡ao do espanhol" 0000041D = "Sueco" 0000100C = "Francˆs (Su¡‡a)" 00000807 = "Alemao (Su‡a)" 0001041F = "Turco F" 0000041F = "Turco Q" 00000422 = "Ucraniano" 00000809 = "Reino Unido" 00000409 = "EUA" 00010409 = "EUA-Dvorak" 00030409 = "EUA-Dvorak para esquerdinos" 00040409 = "EUA-Dvorak para dextros" 00020409 = "EUA-internacional" [DiskDrivers] dmboot = "Suporte de volumes dinƒmicos (dmboot)" i2omgmt = "Contrololador de suporte de E/S Intelligent" [InputDevicesSupport] usbehci = "Controlador anfitrião avançado",files.usbehci,usbehci usbohci = "Controlador anfitrião aberto",files.usbohci,usbohci usbuhci = "Controlador anfitrião universal",files.usbuhci,usbuhci usbhub = "Controlador de concentrador USB gen‚rico",files.usbhub,usbhub hidusb = "Analisador de interface humana",files.hidusb,hidusb serial = "Controlador de porta s‚rie",files.none,serial serenum = "Enumerador de porta s‚rie",files.none,serenum usbstor = "Controlador de classe de armazenamento USB",files.usbstor,usbstor usbccgp = "Controlador principal gen‚rico USB",files.usbccgp,usbccgp @i:wd = "Controlador de hora da Microsoft",files.wd,wd [SCSI] @i:sparrow = "Adaptador Adaptec AHA-151X/AHA-152X/AIC-6X60 SCSI" @i:aha154x = "Adaptador Adaptec AHA-154X/AHA-164X SCSI" aic78xx = "Controlador Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI" aic78u2 = "Controlador Adaptec AHA-294XU2/AIC-7890 SCSI" adpu160m = "Placa Adaptec AIC-789X/AHA-3960 Ultra160 PCI SCSI" adpu320 = "Controlador Adaptec Ultra320 Family SCSI" afcnt = "Controlador Agilent HHBA-510x PCI Fibre Channel" dpti2o = "Controlador Adaptec 2000S/3000S Ultra160 SCSI RAID" @i:asc3550 = "Adaptador anfitriao Advansys 3550 Ultra Wide SCSI" @i:asc3350p = "Adaptador anfitriao Advansys ABP460 PCMCIA SCSI" @i:abp480n5 = "Adaptador anfitriao Advansys ABP480 CardBus SCSI" @i:asc = "Adaptador anfitriao Advansys SCSI" @i:amsint = "Adaptador de Ethernet/controlador AMD PCI SCSI" mraid35x = "Controlador AMI MegaRaid RAID" @i:cpqarray = "Sequˆncia de discos Compaq" cpqfcalm = "Controlador anfitriao Compaq Fibre Channel" cpqarry2 = "Controlador Smart Array da Compaq" cpqcissm = "Controlador da série Smart Array 53xx da Compaq" lp6nds35 = "Adaptadores Emulex LP6000 Fibre Channel" @i:cd20xrnt = "Controlador de CD-ROM PCMCIA port til da IBM" @i:ipsraidn = "Placa ServeRAID da IBM" nfrd960 = "Placa ServeRAID da IBM" @i:i2omp = "Controlador de E/S inteligente" @i:iirsp = "Adaptador RAID da Intel" atapi = "Controlador IDE PCI/IDE CD-ROM (ATAPI 1.2)" cbidf2k = "Controlador CardBus/PCMCIA IDE Miniport" @i:ini910u = "Adaptador Initio Ultra SCSI" @i:dac2w2k = "Controladores Raid Mylex EXR2000,3000/AR160,170,352" dac960nt = "Controlador Raid Mylex DAC960/Digital SWXCR-Ex" @i:ultra = "Controlador Ultra IDE da Promise Technology Inc." @i:hpt3xx = "Controlador RAID da HighPoint" ql1240 = "Adaptador QLogic ISP 1240 SCSI" ql10wnt = "Adaptador QLogic PCI SCSI" ql1080 = "Qlogic QLA1080, 64 bit PCI LVD SCSI HBA" ql1280 = "Qlogic QLA1280, 64 bit PCI LVD SCSI HBA" ql12160 = "QLogic QLA12160, 64 bit PCI DUAL 160M SCSI HBA" ql2100 = "Adapatador de canal de fibra QLogic QLA2000/QLA2100 PCI" ql2200 = "Adapatador de canal de fibra QLogic QLA2200 PCI" ql2300 = "Adapatador de canal de fibra QLogic QLA2300 PCI" sym_hi = "Adaptador anfitriao LSI Logic C896 PCI SCSI" sym_u3 = "Adaptador anfitriao LSI Logic C1010 PCI SCSI" @i:symc810 = "Adaptador LSI Logic C8xx PCI SCSI" symc8xx = "Adaptador LSI Logic C8xx PCI SCSI Host" symmpi = "Adaptador anfitriao LSI Logic PCI Fibre Channel/LSI Logic PCI-X Ultra320 SCSI" hpn = "Controlador Hewlett Packard NetRAID-4M RAID" perc2 = "Controlador Dell PERC 2/3 RAID" perc2gat = "Controlador (Gatling) Dell PERC 2/3 RAID" [BootBusExtenders] pci = "Controlador de barramento PCI",files.pci,pci acpi = "Controlador de barramento ACPI Plug & Play",files.acpi,acpi isapnp = "Controlador de barramento ISA Plug & Play",files.isapnp,isapnp acpiec = "Controlador incorporado ACPI",files.none,acpiec ohci1394 = "Controlador de porta compat¡vel com barramentos OHCI IEEE 1394",files.ohci1394,ohci1394 [BusExtenders] pcmcia = "Suporte PCMCIA",files.pcmcia,pcmcia pciide = "Controlador de barramento PCI IDE",files.pciide,pciide intelide = "Controlador de barramento Intel IDE",files.intelide,intelide viaide = "Controlador de barramento VIA IDE",files.viaide,viaide cmdide = "Controlador de barramento CMD IDE",files.cmdide,cmdide toside = "Controlador de barramento Toshiba IDE",files.toside,toside aliide = "Controlador de barramento ALI IDE",files.aliide,aliide mountmgr = "Gestor de ponto de montagem",files.none,mountmgr ftdisk = "Gestor de volumes",files.none,ftdisk partmgr = "Gestor de parti‡oes",files.none,partmgr volsnap = "Gestor de cópia sombra de volume",files.none,volsnap fdc = "Suporte a unidades de disquetes",files.none,fdc dmload = "Suporte de volumes dinƒmicos(dmload)",files.none,dmload dmio = "Suporte de volumes dinƒmicos (dmio)",files.none,dmio sbp2port = "Controlador de porta de armazenamento SBP2 IEEE 1394", files.sbp2port,sbp2port [Computer] @i:acpiapic_mp = "Multiprocessador ACPI para PC",files.none @i:acpiapic_up = "Uniprocessador ACPI para PC",files.none @a:acpiapic_mp = "Multiprocessador ACPI para x86-64",files.none @a:acpiapic_up = "Uniprocessador ACPI para x86-64",files.none @i:acpipic_up = "PC com interface de energia e configura‡ao avan‡ada (ACPI)",files.none @i:mps_up = "PC com uniprocessador MPS",files.none @i:mps_mp = "PC com multiprocessador MPS",files.none @i:e_isa_up = "PC padrao",files.none @m:acpipic_up = "Uniprocessador ACPI ia64",files.none @m:acpipic_mp = "Multiprocessador ACPI ia64",files.none [Display] @i:forcevga = "VGA padrão (640x480, 16 cores)",files.none @i:vga = "Detectar automaticamente",files.none @@!i:vga = "Compat¡vel com VGA",files.none @i:sglfb = "Cobalt",files.sglfb [Mouse] @i:msps2 = "Rato Microsoft de porta de rato (inclui BallPoint)",files.i8042,i8042prt @i:lgps2 = "Rato Logitech de porta de rato",files.i8042,i8042prt @i:msbpser = "Rato Microsoft BallPoint s‚rie",files.sermouse,sermouse @i:lgser = "Rato Logitech s‚rie",files.sermouse,sermouse @@:none = "Sem rato ou outro dispositivo apontador",files.none,"" @@:mouhid = "Rato USB",files.mouhid,mouhid @@:msser = "Rato s‚rie Microsoft",files.sermouse,sermouse @@:ps2 = "Rato de porta de rato",files.i8042,i8042prt @@:sermouse = "Rato s‚rie",files.sermouse,sermouse @i:USB = "Rato USB",files.mouhid,mouhid @*: COMPAT: we purposely put two strings section in txtsetup.sif @*: The problem is that setupapi only reads strings from the first @*: strings section it encounters. Since older versions of the OS @*: accidentally had multiple Strings sections in the past, we make @*: Whistler have multiple strings sections so that older applications @*: (like win2k risetup) can read this file without requiring any change @*: The only string that risetup specifically cares about is whatever @*: LoadIdentifier points at, so you can probably safely add new strings @*: to this section. @*: @*: @*: The first strings section comes another one of the files that @*: builds txtsetup.sif [Strings] @@!m:@w!p:wks_id = "Microsoft Windows XP Professional" @a:@w!p:wks_id = "Windows XP 64-Bit 2003" @m:@w!p:wks_id = "Windows XP 64-Bit 2003" @@:@p:wks_id = "Microsoft Windows XP Home Edition" @@:@s!e!b!l:srv_id = "Windows Server 2003, Standard" @@:@e!d:srv_id = "Windows Server 2003, Enterprise" @@:@d:srv_id = "Windows Server 2003, Datacenter" @@:@b:srv_id = "Windows Server 2003, Web" @@:@l:srv_id = "Windows Server 2003 for Small Business Server" @@!m:@w!p:wks_id_vga = "Microsoft Windows XP Professional [modo VGA]" @a:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [modo VGA]" @m:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [modo VGA]" @@:@p:wks_id_vga = "Microsoft Windows XP Home Edition [modo VGA]" @@:@s!e!b!l:srv_id_vga = "Windows Server 2003, Standard [modo VGA]" @@:@e!d:srv_id_vga = "Windows Server 2003, Enterprise [modo VGA]" @@:@d:srv_id_vga = "Windows Server 2003, Datacenter [modo VGA]" @@:@b:srv_id_vga = "Windows Server 2003, Web [modo VGA]" @@:@l:srv_id_vga = "Windows Server 2003 for Small Business Server [modo VGA]" @@:@w:cancel_id = "Cancelar configuração do Windows XP" @@:@w:9x_id = "Microsoft Windows"