sinclude(`d3dmkhdr.m4')dnl This file must be preprocessed by the m4 preprocessor. /*==========================================================================; * * Copyright (C) Microsoft Corporation. All Rights Reserved. * * File: d3dhal.h * Content: Direct3D HAL include file * ***************************************************************************/ #ifndef _D3DHAL_H_ #define _D3DHAL_H_ ;begin_internal #include "d3dtypesp.h" #include "d3dcapsp.h" #if(DIRECT3D_VERSION >= 0x0800 ) #include "d3d8typesp.h" #include "d3d8capsp.h" #endif ;end_internal ;begin_external #include "ddraw.h" #include "d3dtypes.h" #include "d3dcaps.h" #include "d3d.h" #include "d3d8.h" ;end_external struct _D3DHAL_CALLBACKS; typedef struct _D3DHAL_CALLBACKS D3DHAL_CALLBACKS, *LPD3DHAL_CALLBACKS; struct _D3DHAL_CALLBACKS2; typedef struct _D3DHAL_CALLBACKS2 D3DHAL_CALLBACKS2, *LPD3DHAL_CALLBACKS2; struct _D3DHAL_CALLBACKS3; typedef struct _D3DHAL_CALLBACKS3 D3DHAL_CALLBACKS3, *LPD3DHAL_CALLBACKS3; typedef struct _DDRAWI_DIRECTDRAW_GBL FAR *LPDDRAWI_DIRECTDRAW_GBL; typedef struct _DDRAWI_DIRECTDRAW_LCL FAR *LPDDRAWI_DIRECTDRAW_LCL; struct _DDRAWI_DDRAWSURFACE_LCL; typedef struct _DDRAWI_DDRAWSURFACE_LCL FAR *LPDDRAWI_DDRAWSURFACE_LCL; /* * If the HAL driver does not implement clipping, it must reserve at least * this much space at the end of the LocalVertexBuffer for use by the HEL * clipping. I.e. the vertex buffer contain dwNumVertices+dwNumClipVertices * vertices. No extra space is needed by the HEL clipping in the * LocalHVertexBuffer. */ #define D3DHAL_NUMCLIPVERTICES 20 /* * These are a few special internal renderstates etc. that would * logically be in d3dtypes.h, but that file is external, so they are * here. */ #define D3DTSS_MAX ((D3DTEXTURESTAGESTATETYPE)24) ;dx6 #define D3DTSS_MAX ((D3DTEXTURESTAGESTATETYPE)29) ;dx7 #define D3DTSS_MAX ((D3DTEXTURESTAGESTATETYPE)29) ;dx8 /* * If DX8 driver wants to support pre-DX8 applications, it should use these * definitions for pre-DX8 world matrices */ #define D3DTRANSFORMSTATE_WORLD_DX7 1 #define D3DTRANSFORMSTATE_WORLD1_DX7 4 #define D3DTRANSFORMSTATE_WORLD2_DX7 5 #define D3DTRANSFORMSTATE_WORLD3_DX7 6 /* * Generally needed maximum state structure sizes. Note that the copy of * these in refrasti.hpp must be kept in sync with these. */ #define D3DHAL_MAX_RSTATES (D3DRENDERSTATE_WRAPBIAS + 128) /* Last state offset for combined render state and texture stage array + 1 */ #define D3DHAL_MAX_RSTATES_AND_STAGES \ (D3DHAL_TSS_RENDERSTATEBASE + \ D3DHAL_TSS_MAXSTAGES * D3DHAL_TSS_STATESPERSTAGE) /* Last texture state ID */ #define D3DHAL_MAX_TEXTURESTATES (13) /* Last texture state ID + 1 */ #define D3DHAL_TEXTURESTATEBUF_SIZE (D3DHAL_MAX_TEXTURESTATES+1) /* * If no dwNumVertices is given, this is what will be used. */ #define D3DHAL_DEFAULT_TL_NUM ((32 * 1024) / sizeof (D3DTLVERTEX)) #define D3DHAL_DEFAULT_H_NUM ((32 * 1024) / sizeof (D3DHVERTEX)) /* * Description for a device. * This is used to describe a device that is to be created or to query * the current device. * * For DX5 and subsequent runtimes, D3DDEVICEDESC is a user-visible * structure that is not seen by the device drivers. The runtime * stitches a D3DDEVICEDESC together using the D3DDEVICEDESC_V1 * embedded in the GLOBALDRIVERDATA and the extended caps queried * from the driver using GetDriverInfo. */ typedef struct _D3DDeviceDesc_V1 { DWORD dwSize; /* Size of D3DDEVICEDESC structure */ DWORD dwFlags; /* Indicates which fields have valid data */ D3DCOLORMODEL dcmColorModel; /* Color model of device */ DWORD dwDevCaps; /* Capabilities of device */ D3DTRANSFORMCAPS dtcTransformCaps; /* Capabilities of transform */ BOOL bClipping; /* Device can do 3D clipping */ D3DLIGHTINGCAPS dlcLightingCaps; /* Capabilities of lighting */ D3DPRIMCAPS dpcLineCaps; D3DPRIMCAPS dpcTriCaps; DWORD dwDeviceRenderBitDepth; /* One of DDBD_16, etc.. */ DWORD dwDeviceZBufferBitDepth;/* One of DDBD_16, 32, etc.. */ DWORD dwMaxBufferSize; /* Maximum execute buffer size */ DWORD dwMaxVertexCount; /* Maximum vertex count */ } D3DDEVICEDESC_V1, *LPD3DDEVICEDESC_V1; #define D3DDEVICEDESCSIZE_V1 (sizeof(D3DDEVICEDESC_V1)) /* * This is equivalent to the D3DDEVICEDESC understood by DX5, available only * from DX6. It is the same as D3DDEVICEDESC structure in DX5. * D3DDEVICEDESC is still the user-visible structure that is not seen by the * device drivers. The runtime stitches a D3DDEVICEDESC together using the * D3DDEVICEDESC_V1 embedded in the GLOBALDRIVERDATA and the extended caps * queried from the driver using GetDriverInfo. */ typedef struct _D3DDeviceDesc_V2 { DWORD dwSize; /* Size of D3DDEVICEDESC structure */ DWORD dwFlags; /* Indicates which fields have valid data */ D3DCOLORMODEL dcmColorModel; /* Color model of device */ DWORD dwDevCaps; /* Capabilities of device */ D3DTRANSFORMCAPS dtcTransformCaps; /* Capabilities of transform */ BOOL bClipping; /* Device can do 3D clipping */ D3DLIGHTINGCAPS dlcLightingCaps; /* Capabilities of lighting */ D3DPRIMCAPS dpcLineCaps; D3DPRIMCAPS dpcTriCaps; DWORD dwDeviceRenderBitDepth; /* One of DDBD_16, etc.. */ DWORD dwDeviceZBufferBitDepth;/* One of DDBD_16, 32, etc.. */ DWORD dwMaxBufferSize; /* Maximum execute buffer size */ DWORD dwMaxVertexCount; /* Maximum vertex count */ DWORD dwMinTextureWidth, dwMinTextureHeight; DWORD dwMaxTextureWidth, dwMaxTextureHeight; DWORD dwMinStippleWidth, dwMaxStippleWidth; DWORD dwMinStippleHeight, dwMaxStippleHeight; } D3DDEVICEDESC_V2, *LPD3DDEVICEDESC_V2; #define D3DDEVICEDESCSIZE_V2 (sizeof(D3DDEVICEDESC_V2)) ;begin_if_(DIRECT3D_VERSION)_700 /* * This is equivalent to the D3DDEVICEDESC understood by DX6, available only * from DX6. It is the same as D3DDEVICEDESC structure in DX6. * D3DDEVICEDESC is still the user-visible structure that is not seen by the * device drivers. The runtime stitches a D3DDEVICEDESC together using the * D3DDEVICEDESC_V1 embedded in the GLOBALDRIVERDATA and the extended caps * queried from the driver using GetDriverInfo. */ typedef struct _D3DDeviceDesc_V3 { DWORD dwSize; /* Size of D3DDEVICEDESC structure */ DWORD dwFlags; /* Indicates which fields have valid data */ D3DCOLORMODEL dcmColorModel; /* Color model of device */ DWORD dwDevCaps; /* Capabilities of device */ D3DTRANSFORMCAPS dtcTransformCaps; /* Capabilities of transform */ BOOL bClipping; /* Device can do 3D clipping */ D3DLIGHTINGCAPS dlcLightingCaps; /* Capabilities of lighting */ D3DPRIMCAPS dpcLineCaps; D3DPRIMCAPS dpcTriCaps; DWORD dwDeviceRenderBitDepth; /* One of DDBD_16, etc.. */ DWORD dwDeviceZBufferBitDepth;/* One of DDBD_16, 32, etc.. */ DWORD dwMaxBufferSize; /* Maximum execute buffer size */ DWORD dwMaxVertexCount; /* Maximum vertex count */ DWORD dwMinTextureWidth, dwMinTextureHeight; DWORD dwMaxTextureWidth, dwMaxTextureHeight; DWORD dwMinStippleWidth, dwMaxStippleWidth; DWORD dwMinStippleHeight, dwMaxStippleHeight; DWORD dwMaxTextureRepeat; DWORD dwMaxTextureAspectRatio; DWORD dwMaxAnisotropy; D3DVALUE dvGuardBandLeft; D3DVALUE dvGuardBandTop; D3DVALUE dvGuardBandRight; D3DVALUE dvGuardBandBottom; D3DVALUE dvExtentsAdjust; DWORD dwStencilCaps; DWORD dwFVFCaps; /* low 4 bits: 0 implies TLVERTEX only, 1..8 imply FVF aware */ DWORD dwTextureOpCaps; WORD wMaxTextureBlendStages; WORD wMaxSimultaneousTextures; } D3DDEVICEDESC_V3, *LPD3DDEVICEDESC_V3; #define D3DDEVICEDESCSIZE_V3 (sizeof(D3DDEVICEDESC_V3)) ;end_if_(DIRECT3D_VERSION)_700 /* -------------------------------------------------------------- * Instantiated by the HAL driver on driver connection. */ typedef struct _D3DHAL_GLOBALDRIVERDATA { DWORD dwSize; // Size of this structure D3DDEVICEDESC_V1 hwCaps; // Capabilities of the hardware DWORD dwNumVertices; // see following comment DWORD dwNumClipVertices; // see following comment DWORD dwNumTextureFormats; // Number of texture formats LPDDSURFACEDESC lpTextureFormats; // Pointer to texture formats } D3DHAL_GLOBALDRIVERDATA; typedef D3DHAL_GLOBALDRIVERDATA *LPD3DHAL_GLOBALDRIVERDATA; #define D3DHAL_GLOBALDRIVERDATASIZE (sizeof(D3DHAL_GLOBALDRIVERDATA)) ;begin_if_(DIRECT3D_VERSION)_700 /* -------------------------------------------------------------- * Extended caps introduced with DX5 and queried with * GetDriverInfo (GUID_D3DExtendedCaps). */ typedef struct _D3DHAL_D3DDX6EXTENDEDCAPS { DWORD dwSize; // Size of this structure DWORD dwMinTextureWidth, dwMaxTextureWidth; DWORD dwMinTextureHeight, dwMaxTextureHeight; DWORD dwMinStippleWidth, dwMaxStippleWidth; DWORD dwMinStippleHeight, dwMaxStippleHeight; /* fields added for DX6 */ DWORD dwMaxTextureRepeat; DWORD dwMaxTextureAspectRatio; DWORD dwMaxAnisotropy; D3DVALUE dvGuardBandLeft; D3DVALUE dvGuardBandTop; D3DVALUE dvGuardBandRight; D3DVALUE dvGuardBandBottom; D3DVALUE dvExtentsAdjust; DWORD dwStencilCaps; DWORD dwFVFCaps; /* low 4 bits: 0 implies TLVERTEX only, 1..8 imply FVF aware */ DWORD dwTextureOpCaps; WORD wMaxTextureBlendStages; WORD wMaxSimultaneousTextures; } D3DHAL_D3DDX6EXTENDEDCAPS; ;end_if_(DIRECT3D_VERSION)_700 /* -------------------------------------------------------------- * Extended caps introduced with DX5 and queried with * GetDriverInfo (GUID_D3DExtendedCaps). */ typedef struct _D3DHAL_D3DEXTENDEDCAPS { DWORD dwSize; // Size of this structure DWORD dwMinTextureWidth, dwMaxTextureWidth; DWORD dwMinTextureHeight, dwMaxTextureHeight; DWORD dwMinStippleWidth, dwMaxStippleWidth; DWORD dwMinStippleHeight, dwMaxStippleHeight; /* fields added for DX6 */ DWORD dwMaxTextureRepeat; DWORD dwMaxTextureAspectRatio; DWORD dwMaxAnisotropy; D3DVALUE dvGuardBandLeft; D3DVALUE dvGuardBandTop; D3DVALUE dvGuardBandRight; D3DVALUE dvGuardBandBottom; D3DVALUE dvExtentsAdjust; DWORD dwStencilCaps; DWORD dwFVFCaps; /* low 4 bits: 0 implies TLVERTEX only, 1..8 imply FVF aware */ DWORD dwTextureOpCaps; WORD wMaxTextureBlendStages; WORD wMaxSimultaneousTextures; ;begin_if_(DIRECT3D_VERSION)_700 /* fields added for DX7 */ DWORD dwMaxActiveLights; D3DVALUE dvMaxVertexW; WORD wMaxUserClipPlanes; WORD wMaxVertexBlendMatrices; DWORD dwVertexProcessingCaps; DWORD dwReserved1; DWORD dwReserved2; DWORD dwReserved3; DWORD dwReserved4; ;end_if_(DIRECT3D_VERSION)_700 } D3DHAL_D3DEXTENDEDCAPS; typedef D3DHAL_D3DEXTENDEDCAPS *LPD3DHAL_D3DEXTENDEDCAPS; #define D3DHAL_D3DEXTENDEDCAPSSIZE (sizeof(D3DHAL_D3DEXTENDEDCAPS)) ;begin_if_(DIRECT3D_VERSION)_700 typedef D3DHAL_D3DDX6EXTENDEDCAPS *LPD3DHAL_D3DDX6EXTENDEDCAPS; #define D3DHAL_D3DDX6EXTENDEDCAPSSIZE (sizeof(D3DHAL_D3DDX6EXTENDEDCAPS)) ;end_if_(DIRECT3D_VERSION)_700 /* -------------------------------------------------------------- * Argument to the HAL functions. * * !!! When this structure is changed, D3DHAL_CONTEXTCREATEDATA in * windows\published\ntgdistr.h also must be changed to be the same size !!! * */ typedef struct _D3DHAL_CONTEXTCREATEDATA { union { LPDDRAWI_DIRECTDRAW_GBL lpDDGbl; // in: Driver struct (legacy) LPDDRAWI_DIRECTDRAW_LCL lpDDLcl; // in: For DX7 driver onwards }; union { LPDIRECTDRAWSURFACE lpDDS; // in: Surface to be used as target LPDDRAWI_DDRAWSURFACE_LCL lpDDSLcl; // For DX7 onwards }; union { LPDIRECTDRAWSURFACE lpDDSZ; // in: Surface to be used as Z LPDDRAWI_DDRAWSURFACE_LCL lpDDSZLcl; // For DX7 onwards }; union { DWORD dwPID; // in: Current process id ULONG_PTR dwrstates; // Must be larger enough to hold a pointer as // we can return a pointer in this field }; ULONG_PTR dwhContext; // out: Context handle HRESULT ddrval; // out: Return value } D3DHAL_CONTEXTCREATEDATA; typedef D3DHAL_CONTEXTCREATEDATA *LPD3DHAL_CONTEXTCREATEDATA; typedef struct _D3DHAL_CONTEXTDESTROYDATA { ULONG_PTR dwhContext; // in: Context handle HRESULT ddrval; // out: Return value } D3DHAL_CONTEXTDESTROYDATA; typedef D3DHAL_CONTEXTDESTROYDATA *LPD3DHAL_CONTEXTDESTROYDATA; typedef struct _D3DHAL_CONTEXTDESTROYALLDATA { DWORD dwPID; // in: Process id to destroy contexts for HRESULT ddrval; // out: Return value } D3DHAL_CONTEXTDESTROYALLDATA; typedef D3DHAL_CONTEXTDESTROYALLDATA *LPD3DHAL_CONTEXTDESTROYALLDATA; typedef struct _D3DHAL_SCENECAPTUREDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwFlag; // in: Indicates beginning or end HRESULT ddrval; // out: Return value } D3DHAL_SCENECAPTUREDATA; typedef D3DHAL_SCENECAPTUREDATA *LPD3DHAL_SCENECAPTUREDATA; typedef struct _D3DHAL_RENDERSTATEDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwOffset; // in: Where to find states in buffer DWORD dwCount; // in: How many states to process LPDIRECTDRAWSURFACE lpExeBuf; // in: Execute buffer containing data HRESULT ddrval; // out: Return value } D3DHAL_RENDERSTATEDATA; typedef D3DHAL_RENDERSTATEDATA *LPD3DHAL_RENDERSTATEDATA; typedef struct _D3DHAL_RENDERPRIMITIVEDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwOffset; // in: Where to find primitive data in buffer DWORD dwStatus; // in/out: Condition branch status LPDIRECTDRAWSURFACE lpExeBuf; // in: Execute buffer containing data DWORD dwTLOffset; // in: Byte offset in lpTLBuf for start of vertex data LPDIRECTDRAWSURFACE lpTLBuf; // in: Execute buffer containing TLVertex data D3DINSTRUCTION diInstruction; // in: Primitive instruction HRESULT ddrval; // out: Return value } D3DHAL_RENDERPRIMITIVEDATA; typedef D3DHAL_RENDERPRIMITIVEDATA *LPD3DHAL_RENDERPRIMITIVEDATA; typedef struct _D3DHAL_TEXTURECREATEDATA { ULONG_PTR dwhContext; // in: Context handle LPDIRECTDRAWSURFACE lpDDS; // in: Pointer to surface object DWORD dwHandle; // out: Handle to texture HRESULT ddrval; // out: Return value } D3DHAL_TEXTURECREATEDATA; typedef D3DHAL_TEXTURECREATEDATA *LPD3DHAL_TEXTURECREATEDATA; typedef struct _D3DHAL_TEXTUREDESTROYDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwHandle; // in: Handle to texture HRESULT ddrval; // out: Return value } D3DHAL_TEXTUREDESTROYDATA; typedef D3DHAL_TEXTUREDESTROYDATA *LPD3DHAL_TEXTUREDESTROYDATA; typedef struct _D3DHAL_TEXTURESWAPDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwHandle1; // in: Handle to texture 1 DWORD dwHandle2; // in: Handle to texture 2 HRESULT ddrval; // out: Return value } D3DHAL_TEXTURESWAPDATA; typedef D3DHAL_TEXTURESWAPDATA *LPD3DHAL_TEXTURESWAPDATA; typedef struct _D3DHAL_TEXTUREGETSURFDATA { ULONG_PTR dwhContext; // in: Context handle ULONG_PTR lpDDS; // out: Pointer to surface object DWORD dwHandle; // in: Handle to texture HRESULT ddrval; // out: Return value } D3DHAL_TEXTUREGETSURFDATA; typedef D3DHAL_TEXTUREGETSURFDATA *LPD3DHAL_TEXTUREGETSURFDATA; typedef struct _D3DHAL_GETSTATEDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwWhich; // in: Transform, lighting or render? D3DSTATE ddState; // in/out: State. HRESULT ddrval; // out: Return value } D3DHAL_GETSTATEDATA; typedef D3DHAL_GETSTATEDATA *LPD3DHAL_GETSTATEDATA; /* -------------------------------------------------------------- * Direct3D HAL Table. * Instantiated by the HAL driver on connection. * * Calls take the form of: * retcode = HalCall(HalCallData* lpData); */ typedef DWORD (__stdcall *LPD3DHAL_CONTEXTCREATECB) (LPD3DHAL_CONTEXTCREATEDATA); typedef DWORD (__stdcall *LPD3DHAL_CONTEXTDESTROYCB) (LPD3DHAL_CONTEXTDESTROYDATA); typedef DWORD (__stdcall *LPD3DHAL_CONTEXTDESTROYALLCB) (LPD3DHAL_CONTEXTDESTROYALLDATA); typedef DWORD (__stdcall *LPD3DHAL_SCENECAPTURECB) (LPD3DHAL_SCENECAPTUREDATA); typedef DWORD (__stdcall *LPD3DHAL_RENDERSTATECB) (LPD3DHAL_RENDERSTATEDATA); typedef DWORD (__stdcall *LPD3DHAL_RENDERPRIMITIVECB) (LPD3DHAL_RENDERPRIMITIVEDATA); typedef DWORD (__stdcall *LPD3DHAL_TEXTURECREATECB) (LPD3DHAL_TEXTURECREATEDATA); typedef DWORD (__stdcall *LPD3DHAL_TEXTUREDESTROYCB) (LPD3DHAL_TEXTUREDESTROYDATA); typedef DWORD (__stdcall *LPD3DHAL_TEXTURESWAPCB) (LPD3DHAL_TEXTURESWAPDATA); typedef DWORD (__stdcall *LPD3DHAL_TEXTUREGETSURFCB) (LPD3DHAL_TEXTUREGETSURFDATA); typedef DWORD (__stdcall *LPD3DHAL_GETSTATECB) (LPD3DHAL_GETSTATEDATA); /* * Regarding dwNumVertices, specify 0 if you are relying on the HEL to do * everything and you do not need the resultant TLVertex buffer to reside * in device memory. * The HAL driver will be asked to allocate dwNumVertices + dwNumClipVertices * in the case described above. */ typedef struct _D3DHAL_CALLBACKS { DWORD dwSize; // Device context LPD3DHAL_CONTEXTCREATECB ContextCreate; LPD3DHAL_CONTEXTDESTROYCB ContextDestroy; LPD3DHAL_CONTEXTDESTROYALLCB ContextDestroyAll; // Scene Capture LPD3DHAL_SCENECAPTURECB SceneCapture; LPVOID lpReserved10; // Must be zero LPVOID lpReserved11; // Must be zero // Execution LPD3DHAL_RENDERSTATECB RenderState; LPD3DHAL_RENDERPRIMITIVECB RenderPrimitive; DWORD dwReserved; // Must be zero // Textures LPD3DHAL_TEXTURECREATECB TextureCreate; LPD3DHAL_TEXTUREDESTROYCB TextureDestroy; LPD3DHAL_TEXTURESWAPCB TextureSwap; LPD3DHAL_TEXTUREGETSURFCB TextureGetSurf; LPVOID lpReserved12; // Must be zero LPVOID lpReserved13; // Must be zero LPVOID lpReserved14; // Must be zero LPVOID lpReserved15; // Must be zero LPVOID lpReserved16; // Must be zero LPVOID lpReserved17; // Must be zero LPVOID lpReserved18; // Must be zero LPVOID lpReserved19; // Must be zero LPVOID lpReserved20; // Must be zero LPVOID lpReserved21; // Must be zero // Pipeline state LPD3DHAL_GETSTATECB GetState; DWORD dwReserved0; // Must be zero DWORD dwReserved1; // Must be zero DWORD dwReserved2; // Must be zero DWORD dwReserved3; // Must be zero DWORD dwReserved4; // Must be zero DWORD dwReserved5; // Must be zero DWORD dwReserved6; // Must be zero DWORD dwReserved7; // Must be zero DWORD dwReserved8; // Must be zero DWORD dwReserved9; // Must be zero } D3DHAL_CALLBACKS; typedef D3DHAL_CALLBACKS *LPD3DHAL_CALLBACKS; #define D3DHAL_SIZE_V1 sizeof( D3DHAL_CALLBACKS ) typedef struct _D3DHAL_SETRENDERTARGETDATA { ULONG_PTR dwhContext; // in: Context handle union { LPDIRECTDRAWSURFACE lpDDS; // in: new render target LPDDRAWI_DDRAWSURFACE_LCL lpDDSLcl; }; union { LPDIRECTDRAWSURFACE lpDDSZ; // in: new Z buffer LPDDRAWI_DDRAWSURFACE_LCL lpDDSZLcl; }; HRESULT ddrval; // out: Return value } D3DHAL_SETRENDERTARGETDATA; typedef D3DHAL_SETRENDERTARGETDATA FAR *LPD3DHAL_SETRENDERTARGETDATA; // This bit is the same as D3DCLEAR_RESERVED0 in d3d8types.h // When set it means that driver has to cull rects against current viewport. // The bit is set only for pure devices // #define D3DCLEAR_COMPUTERECTS 0x00000008l typedef struct _D3DHAL_CLEARDATA { ULONG_PTR dwhContext; // in: Context handle // dwFlags can contain D3DCLEAR_TARGET or D3DCLEAR_ZBUFFER DWORD dwFlags; // in: surfaces to clear DWORD dwFillColor; // in: Color value for rtarget DWORD dwFillDepth; // in: Depth value for Z buffer LPD3DRECT lpRects; // in: Rectangles to clear DWORD dwNumRects; // in: Number of rectangles HRESULT ddrval; // out: Return value } D3DHAL_CLEARDATA; typedef D3DHAL_CLEARDATA FAR *LPD3DHAL_CLEARDATA; typedef struct _D3DHAL_DRAWONEPRIMITIVEDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwFlags; // in: flags D3DPRIMITIVETYPE PrimitiveType; // in: type of primitive to draw union{ D3DVERTEXTYPE VertexType; // in: type of vertices DWORD dwFVFControl; // in: FVF control DWORD }; LPVOID lpvVertices; // in: pointer to vertices DWORD dwNumVertices; // in: number of vertices DWORD dwReserved; // in: reserved HRESULT ddrval; // out: Return value } D3DHAL_DRAWONEPRIMITIVEDATA; typedef D3DHAL_DRAWONEPRIMITIVEDATA *LPD3DHAL_DRAWONEPRIMITIVEDATA; typedef struct _D3DHAL_DRAWONEINDEXEDPRIMITIVEDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwFlags; // in: flags word // Primitive and vertex type D3DPRIMITIVETYPE PrimitiveType; // in: primitive type union{ D3DVERTEXTYPE VertexType; // in: vertex type DWORD dwFVFControl; // in: FVF control DWORD }; // Vertices LPVOID lpvVertices; // in: vertex data DWORD dwNumVertices; // in: vertex count // Indices LPWORD lpwIndices; // in: index data DWORD dwNumIndices; // in: index count HRESULT ddrval; // out: Return value } D3DHAL_DRAWONEINDEXEDPRIMITIVEDATA; typedef D3DHAL_DRAWONEINDEXEDPRIMITIVEDATA *LPD3DHAL_DRAWONEINDEXEDPRIMITIVEDATA; typedef struct _D3DHAL_DRAWPRIMCOUNTS { WORD wNumStateChanges; WORD wPrimitiveType; WORD wVertexType; WORD wNumVertices; } D3DHAL_DRAWPRIMCOUNTS, *LPD3DHAL_DRAWPRIMCOUNTS; typedef struct _D3DHAL_DRAWPRIMITIVESDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwFlags; // // Data block: // // Consists of interleaved D3DHAL_DRAWPRIMCOUNTS, state change pairs, // and primitive drawing commands. // // D3DHAL_DRAWPRIMCOUNTS: gives number of state change pairs and // the information on the primitive to draw. // wPrimitiveType is of type D3DPRIMITIVETYPE. Drivers // must support all 7 of the primitive types specified // in the DrawPrimitive API. // Currently, wVertexType will always be D3DVT_TLVERTEX. // If the wNumVertices member is 0, then the driver should // return after doing the state changing. This is the // terminator for the command stream. // state change pairs: DWORD pairs specify the state changes that // the driver should effect before drawing the primitive. // wNumStateChanges can be 0, in which case the next primitive // should be drawn without any state changes in between. // If present, the state change pairs are NOT aligned, they // immediately follow the PRIMCOUNTS structure. // vertex data (if any): is 32-byte aligned. // // If a primcounts structure follows (i.e. if wNumVertices was nonzero // in the previous one), then it will immediately follow the state // changes or vertex data with no alignment padding. // LPVOID lpvData; DWORD dwFVFControl; // in: FVF control DWORD HRESULT ddrval; // out: Return value } D3DHAL_DRAWPRIMITIVESDATA; typedef D3DHAL_DRAWPRIMITIVESDATA *LPD3DHAL_DRAWPRIMITIVESDATA; typedef DWORD (CALLBACK *LPD3DHAL_SETRENDERTARGETCB) (LPD3DHAL_SETRENDERTARGETDATA); typedef DWORD (CALLBACK *LPD3DHAL_CLEARCB) (LPD3DHAL_CLEARDATA); typedef DWORD (CALLBACK *LPD3DHAL_DRAWONEPRIMITIVECB) (LPD3DHAL_DRAWONEPRIMITIVEDATA); typedef DWORD (CALLBACK *LPD3DHAL_DRAWONEINDEXEDPRIMITIVECB) (LPD3DHAL_DRAWONEINDEXEDPRIMITIVEDATA); typedef DWORD (CALLBACK *LPD3DHAL_DRAWPRIMITIVESCB) (LPD3DHAL_DRAWPRIMITIVESDATA); typedef struct _D3DHAL_CALLBACKS2 { DWORD dwSize; // size of struct DWORD dwFlags; // flags for callbacks LPD3DHAL_SETRENDERTARGETCB SetRenderTarget; LPD3DHAL_CLEARCB Clear; LPD3DHAL_DRAWONEPRIMITIVECB DrawOnePrimitive; LPD3DHAL_DRAWONEINDEXEDPRIMITIVECB DrawOneIndexedPrimitive; LPD3DHAL_DRAWPRIMITIVESCB DrawPrimitives; } D3DHAL_CALLBACKS2; typedef D3DHAL_CALLBACKS2 *LPD3DHAL_CALLBACKS2; #define D3DHAL_CALLBACKS2SIZE sizeof(D3DHAL_CALLBACKS2) #define D3DHAL2_CB32_SETRENDERTARGET 0x00000001L #define D3DHAL2_CB32_CLEAR 0x00000002L #define D3DHAL2_CB32_DRAWONEPRIMITIVE 0x00000004L #define D3DHAL2_CB32_DRAWONEINDEXEDPRIMITIVE 0x00000008L #define D3DHAL2_CB32_DRAWPRIMITIVES 0x00000010L /* -------------------------------------------------------------- * D3DCallbacks3 - queried with GetDriverInfo (GUID_D3DCallbacks3). * * Clear2 - enables stencil clears (exposed to the API in * IDirect3DViewport3::Clear2 * ValidateTextureStageState - evaluates the context's current state (including * multitexture) and returns an error if the hardware cannot * accelerate the current state vector. * DrawPrimitives2 - Renders primitives, and changes device state specified * in the command buffer. * * Multitexture-aware drivers must implement both ValidateTextureStageState. */ typedef struct _D3DHAL_CLEAR2DATA { ULONG_PTR dwhContext; // in: Context handle // dwFlags can contain D3DCLEAR_TARGET, D3DCLEAR_ZBUFFER, and/or D3DCLEAR_STENCIL DWORD dwFlags; // in: surfaces to clear DWORD dwFillColor; // in: Color value for rtarget D3DVALUE dvFillDepth; // in: Depth value for Z buffer (0.0-1.0) DWORD dwFillStencil; // in: value used to clear stencil buffer LPD3DRECT lpRects; // in: Rectangles to clear DWORD dwNumRects; // in: Number of rectangles HRESULT ddrval; // out: Return value } D3DHAL_CLEAR2DATA; typedef D3DHAL_CLEAR2DATA FAR *LPD3DHAL_CLEAR2DATA; typedef struct _D3DHAL_VALIDATETEXTURESTAGESTATEDATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwFlags; // in: Flags, currently set to 0 ULONG_PTR dwReserved; // DWORD dwNumPasses; // out: Number of passes the hardware // can perform the operation in HRESULT ddrval; // out: return value } D3DHAL_VALIDATETEXTURESTAGESTATEDATA; typedef D3DHAL_VALIDATETEXTURESTAGESTATEDATA *LPD3DHAL_VALIDATETEXTURESTAGESTATEDATA; //----------------------------------------------------------------------------- // DrawPrimitives2 DDI //----------------------------------------------------------------------------- // // Command structure for vertex buffer rendering // typedef struct _D3DHAL_DP2COMMAND { BYTE bCommand; // vertex command BYTE bReserved; union { WORD wPrimitiveCount; // primitive count for unconnected primitives WORD wStateCount; // count of render states to follow }; } D3DHAL_DP2COMMAND, *LPD3DHAL_DP2COMMAND; // // DrawPrimitives2 commands: // typedef enum _D3DHAL_DP2OPERATION { D3DDP2OP_POINTS = 1, D3DDP2OP_INDEXEDLINELIST = 2, D3DDP2OP_INDEXEDTRIANGLELIST = 3, D3DDP2OP_RESERVED0 = 4, // Used by the front-end only D3DDP2OP_RENDERSTATE = 8, D3DDP2OP_LINELIST = 15, D3DDP2OP_LINESTRIP = 16, D3DDP2OP_INDEXEDLINESTRIP = 17, D3DDP2OP_TRIANGLELIST = 18, D3DDP2OP_TRIANGLESTRIP = 19, D3DDP2OP_INDEXEDTRIANGLESTRIP = 20, D3DDP2OP_TRIANGLEFAN = 21, D3DDP2OP_INDEXEDTRIANGLEFAN = 22, D3DDP2OP_TRIANGLEFAN_IMM = 23, D3DDP2OP_LINELIST_IMM = 24, D3DDP2OP_TEXTURESTAGESTATE = 25, // Has edge flags and called from Execute D3DDP2OP_INDEXEDTRIANGLELIST2 = 26, D3DDP2OP_INDEXEDLINELIST2 = 27, D3DDP2OP_VIEWPORTINFO = 28, D3DDP2OP_WINFO = 29, // two below are for pre-DX7 interface apps running DX7 driver D3DDP2OP_SETPALETTE = 30, D3DDP2OP_UPDATEPALETTE = 31, ;begin_if_(DIRECT3D_VERSION)_700 // New for DX7 D3DDP2OP_ZRANGE = 32, D3DDP2OP_SETMATERIAL = 33, D3DDP2OP_SETLIGHT = 34, D3DDP2OP_CREATELIGHT = 35, D3DDP2OP_SETTRANSFORM = 36, D3DDP2OP_EXT = 37, D3DDP2OP_TEXBLT = 38, D3DDP2OP_STATESET = 39, D3DDP2OP_SETPRIORITY = 40, ;end_if_(DIRECT3D_VERSION)_700 D3DDP2OP_SETRENDERTARGET = 41, D3DDP2OP_CLEAR = 42, ;begin_if_(DIRECT3D_VERSION)_700 D3DDP2OP_SETTEXLOD = 43, D3DDP2OP_SETCLIPPLANE = 44, ;end_if_(DIRECT3D_VERSION)_700 ;begin_if_(DIRECT3D_VERSION)_800 D3DDP2OP_CREATEVERTEXSHADER = 45, D3DDP2OP_DELETEVERTEXSHADER = 46, D3DDP2OP_SETVERTEXSHADER = 47, D3DDP2OP_SETVERTEXSHADERCONST = 48, D3DDP2OP_SETSTREAMSOURCE = 49, D3DDP2OP_SETSTREAMSOURCEUM = 50, D3DDP2OP_SETINDICES = 51, D3DDP2OP_DRAWPRIMITIVE = 52, D3DDP2OP_DRAWINDEXEDPRIMITIVE = 53, D3DDP2OP_CREATEPIXELSHADER = 54, D3DDP2OP_DELETEPIXELSHADER = 55, D3DDP2OP_SETPIXELSHADER = 56, D3DDP2OP_SETPIXELSHADERCONST = 57, D3DDP2OP_CLIPPEDTRIANGLEFAN = 58, D3DDP2OP_DRAWPRIMITIVE2 = 59, D3DDP2OP_DRAWINDEXEDPRIMITIVE2= 60, D3DDP2OP_DRAWRECTPATCH = 61, D3DDP2OP_DRAWTRIPATCH = 62, D3DDP2OP_VOLUMEBLT = 63, D3DDP2OP_BUFFERBLT = 64, D3DDP2OP_MULTIPLYTRANSFORM = 65, D3DDP2OP_ADDDIRTYRECT = 66, D3DDP2OP_ADDDIRTYBOX = 67 ;end_if_(DIRECT3D_VERSION)_800 } D3DHAL_DP2OPERATION; // // DrawPrimitives2 point primitives // typedef struct _D3DHAL_DP2POINTS { WORD wCount; WORD wVStart; } D3DHAL_DP2POINTS, *LPD3DHAL_DP2POINTS; // // DrawPrimitives2 line primitives // typedef struct _D3DHAL_DP2STARTVERTEX { WORD wVStart; } D3DHAL_DP2STARTVERTEX, *LPD3DHAL_DP2STARTVERTEX; typedef struct _D3DHAL_DP2LINELIST { WORD wVStart; } D3DHAL_DP2LINELIST, *LPD3DHAL_DP2LINELIST; typedef struct _D3DHAL_DP2INDEXEDLINELIST { WORD wV1; WORD wV2; } D3DHAL_DP2INDEXEDLINELIST, *LPD3DHAL_DP2INDEXEDLINELIST; typedef struct _D3DHAL_DP2LINESTRIP { WORD wVStart; } D3DHAL_DP2LINESTRIP, *LPD3DHAL_DP2LINESTRIP; typedef struct _D3DHAL_DP2INDEXEDLINESTRIP { WORD wV[2]; } D3DHAL_DP2INDEXEDLINESTRIP, *LPD3DHAL_DP2INDEXEDLINESTRIP; // // DrawPrimitives2 triangle primitives // typedef struct _D3DHAL_DP2TRIANGLELIST { WORD wVStart; } D3DHAL_DP2TRIANGLELIST, *LPD3DHAL_DP2TRIANGLELIST; typedef struct _D3DHAL_DP2INDEXEDTRIANGLELIST { WORD wV1; WORD wV2; WORD wV3; WORD wFlags; } D3DHAL_DP2INDEXEDTRIANGLELIST, *LPD3DHAL_DP2INDEXEDTRIANGLELIST; typedef struct _D3DHAL_DP2INDEXEDTRIANGLELIST2 { WORD wV1; WORD wV2; WORD wV3; } D3DHAL_DP2INDEXEDTRIANGLELIST2, *LPD3DHAL_DP2INDEXEDTRIANGLELIST2; typedef struct _D3DHAL_DP2TRIANGLESTRIP { WORD wVStart; } D3DHAL_DP2TRIANGLESTRIP, *LPD3DHAL_DP2TRIANGLESTRIP; typedef struct _D3DHAL_DP2INDEXEDTRIANGLESTRIP { WORD wV[3]; } D3DHAL_DP2INDEXEDTRIANGLESTRIP, *LPD3DHAL_DP2INDEXEDTRIANGLESTRIP; typedef struct _D3DHAL_DP2TRIANGLEFAN { WORD wVStart; } D3DHAL_DP2TRIANGLEFAN, *LPD3DHAL_DP2TRIANGLEFAN; typedef struct _D3DHAL_DP2INDEXEDTRIANGLEFAN { WORD wV[3]; } D3DHAL_DP2INDEXEDTRIANGLEFAN, *LPD3DHAL_DP2INDEXEDTRIANGLEFAN; typedef struct _D3DHAL_DP2TRIANGLEFAN_IMM { DWORD dwEdgeFlags; } D3DHAL_DP2TRIANGLEFAN_IMM; typedef D3DHAL_DP2TRIANGLEFAN_IMM *LPD3DHAL_DP2TRIANGLEFAN_IMM; // // DrawPrimitives2 Renderstate changes // typedef struct _D3DHAL_DP2RENDERSTATE { D3DRENDERSTATETYPE RenderState; union { D3DVALUE dvState; DWORD dwState; }; } D3DHAL_DP2RENDERSTATE; typedef D3DHAL_DP2RENDERSTATE * LPD3DHAL_DP2RENDERSTATE; typedef struct _D3DHAL_DP2TEXTURESTAGESTATE { WORD wStage; WORD TSState; DWORD dwValue; } D3DHAL_DP2TEXTURESTAGESTATE; typedef D3DHAL_DP2TEXTURESTAGESTATE *LPD3DHAL_DP2TEXTURESTAGESTATE; typedef struct _D3DHAL_DP2VIEWPORTINFO { DWORD dwX; DWORD dwY; DWORD dwWidth; DWORD dwHeight; } D3DHAL_DP2VIEWPORTINFO; typedef D3DHAL_DP2VIEWPORTINFO *LPD3DHAL_DP2VIEWPORTINFO; typedef struct _D3DHAL_DP2WINFO { D3DVALUE dvWNear; D3DVALUE dvWFar; } D3DHAL_DP2WINFO; typedef D3DHAL_DP2WINFO *LPD3DHAL_DP2WINFO; typedef struct _D3DHAL_DP2SETPALETTE { DWORD dwPaletteHandle; DWORD dwPaletteFlags; DWORD dwSurfaceHandle; } D3DHAL_DP2SETPALETTE; typedef D3DHAL_DP2SETPALETTE *LPD3DHAL_DP2SETPALETTE; typedef struct _D3DHAL_DP2UPDATEPALETTE { DWORD dwPaletteHandle; WORD wStartIndex; WORD wNumEntries; } D3DHAL_DP2UPDATEPALETTE; typedef D3DHAL_DP2UPDATEPALETTE *LPD3DHAL_DP2UPDATEPALETTE; typedef struct _D3DHAL_DP2SETRENDERTARGET { DWORD hRenderTarget; DWORD hZBuffer; } D3DHAL_DP2SETRENDERTARGET; typedef D3DHAL_DP2SETRENDERTARGET *LPD3DHAL_DP2SETRENDERTARGET; ;begin_if_(DIRECT3D_VERSION)_700 // Values for dwOperations in the D3DHAL_DP2STATESET #define D3DHAL_STATESETBEGIN 0 #define D3DHAL_STATESETEND 1 #define D3DHAL_STATESETDELETE 2 #define D3DHAL_STATESETEXECUTE 3 #define D3DHAL_STATESETCAPTURE 4 ;end_if_(DIRECT3D_VERSION)_700 ;begin_if_(DIRECT3D_VERSION)_800 #define D3DHAL_STATESETCREATE 5 ;end_if_(DIRECT3D_VERSION)_800 ;begin_if_(DIRECT3D_VERSION)_700 typedef struct _D3DHAL_DP2STATESET { DWORD dwOperation; DWORD dwParam; // State set handle passed with D3DHAL_STATESETBEGIN, // D3DHAL_STATESETEXECUTE, D3DHAL_STATESETDELETE // D3DHAL_STATESETCAPTURE D3DSTATEBLOCKTYPE sbType; // Type use with D3DHAL_STATESETBEGIN/END } D3DHAL_DP2STATESET; typedef D3DHAL_DP2STATESET *LPD3DHAL_DP2STATESET; // // T&L Hal specific stuff // typedef struct _D3DHAL_DP2ZRANGE { D3DVALUE dvMinZ; D3DVALUE dvMaxZ; } D3DHAL_DP2ZRANGE; typedef D3DHAL_DP2ZRANGE *LPD3DHAL_DP2ZRANGE; typedef D3DMATERIAL7 D3DHAL_DP2SETMATERIAL, *LPD3DHAL_DP2SETMATERIAL; // Values for dwDataType in D3DHAL_DP2SETLIGHT #define D3DHAL_SETLIGHT_ENABLE 0 #define D3DHAL_SETLIGHT_DISABLE 1 // If this is set, light data will be passed in after the // D3DLIGHT7 structure #define D3DHAL_SETLIGHT_DATA 2 typedef struct _D3DHAL_DP2SETLIGHT { DWORD dwIndex; DWORD dwDataType; } D3DHAL_DP2SETLIGHT; typedef D3DHAL_DP2SETLIGHT *LPD3DHAL_DP2SETLIGHT; typedef struct _D3DHAL_DP2SETCLIPPLANE { DWORD dwIndex; D3DVALUE plane[4]; } D3DHAL_DP2SETCLIPPLANE; typedef D3DHAL_DP2SETCLIPPLANE *LPD3DHAL_DP2SETCLIPPLANE; typedef struct _D3DHAL_DP2CREATELIGHT { DWORD dwIndex; } D3DHAL_DP2CREATELIGHT; typedef D3DHAL_DP2CREATELIGHT *LPD3DHAL_DP2CREATELIGHT; typedef struct _D3DHAL_DP2SETTRANSFORM { D3DTRANSFORMSTATETYPE xfrmType; D3DMATRIX matrix; } D3DHAL_DP2SETTRANSFORM; typedef D3DHAL_DP2SETTRANSFORM *LPD3DHAL_DP2SETTRANSFORM; typedef struct _D3DHAL_DP2MULTIPLYTRANSFORM { D3DTRANSFORMSTATETYPE xfrmType; D3DMATRIX matrix; } D3DHAL_DP2MULTIPLYTRANSFORM; typedef D3DHAL_DP2MULTIPLYTRANSFORM *LPD3DHAL_DP2MULTIPLYTRANSFORM; typedef struct _D3DHAL_DP2EXT { DWORD dwExtToken; DWORD dwSize; } D3DHAL_DP2EXT; typedef D3DHAL_DP2EXT *LPD3DHAL_DP2EXT; typedef struct _D3DHAL_DP2TEXBLT { DWORD dwDDDestSurface;// dest surface DWORD dwDDSrcSurface; // src surface POINT pDest; RECTL rSrc; // src rect DWORD dwFlags; // blt flags } D3DHAL_DP2TEXBLT; typedef D3DHAL_DP2TEXBLT *LPD3DHAL_DP2TEXBLT; typedef struct _D3DHAL_DP2SETPRIORITY { DWORD dwDDSurface; DWORD dwPriority; } D3DHAL_DP2SETPRIORITY; typedef D3DHAL_DP2SETPRIORITY *LPD3DHAL_DP2SETPRIORITY; ;end_if_(DIRECT3D_VERSION)_700 typedef struct _D3DHAL_DP2CLEAR { // dwFlags can contain D3DCLEAR_TARGET, D3DCLEAR_ZBUFFER, and/or D3DCLEAR_STENCIL DWORD dwFlags; // in: surfaces to clear DWORD dwFillColor; // in: Color value for rtarget D3DVALUE dvFillDepth; // in: Depth value for Z buffer (0.0-1.0) DWORD dwFillStencil; // in: value used to clear stencil buffer RECT Rects[1]; // in: Rectangles to clear } D3DHAL_DP2CLEAR; typedef D3DHAL_DP2CLEAR *LPD3DHAL_DP2CLEAR; ;begin_if_(DIRECT3D_VERSION)_700 typedef struct _D3DHAL_DP2SETTEXLOD { DWORD dwDDSurface; DWORD dwLOD; } D3DHAL_DP2SETTEXLOD; typedef D3DHAL_DP2SETTEXLOD *LPD3DHAL_DP2SETTEXLOD; ;end_if_(DIRECT3D_VERSION)_700 ;begin_if_(DIRECT3D_VERSION)_800 // Used by SetVertexShader and DeleteVertexShader typedef struct _D3DHAL_DP2VERTEXSHADER { // Vertex shader handle. // The handle could be 0, meaning that the current vertex shader is invalid // (not set). When driver recieves handle 0, it should invalidate all // streams pointer DWORD dwHandle; } D3DHAL_DP2VERTEXSHADER; typedef D3DHAL_DP2VERTEXSHADER *LPD3DHAL_DP2VERTEXSHADER; typedef struct _D3DHAL_DP2CREATEVERTEXSHADER { DWORD dwHandle; // Shader handle DWORD dwDeclSize; // Shader declaration size in bytes DWORD dwCodeSize; // Shader code size in bytes // Declaration follows // Shader code follows } D3DHAL_DP2CREATEVERTEXSHADER; typedef D3DHAL_DP2CREATEVERTEXSHADER *LPD3DHAL_DP2CREATEVERTEXSHADER; typedef struct _D3DHAL_DP2SETVERTEXSHADERCONST { DWORD dwRegister; // Const register to start copying DWORD dwCount; // Number of 4-float vectors to copy // Data follows } D3DHAL_DP2SETVERTEXSHADERCONST; typedef D3DHAL_DP2SETVERTEXSHADERCONST *LPD3DHAL_DP2SETVERTEXSHADERCONST; typedef struct _D3DHAL_DP2SETSTREAMSOURCE { DWORD dwStream; // Stream index, starting from zero DWORD dwVBHandle; // Vertex buffer handle DWORD dwStride; // Vertex size in bytes } D3DHAL_DP2SETSTREAMSOURCE; typedef D3DHAL_DP2SETSTREAMSOURCE *LPD3DHAL_DP2SETSTREAMSOURCE; typedef struct _D3DHAL_DP2SETSTREAMSOURCEUM { DWORD dwStream; // Stream index, starting from zero DWORD dwStride; // Vertex size in bytes } D3DHAL_DP2SETSTREAMSOURCEUM; typedef D3DHAL_DP2SETSTREAMSOURCEUM *LPD3DHAL_DP2SETSTREAMSOURCEUM; typedef struct _D3DHAL_DP2SETINDICES { DWORD dwVBHandle; // Index buffer handle DWORD dwStride; // Index size in bytes (2 or 4) } D3DHAL_DP2SETINDICES; typedef D3DHAL_DP2SETINDICES *LPD3DHAL_DP2SETINDICES; typedef struct _D3DHAL_DP2DRAWPRIMITIVE { D3DPRIMITIVETYPE primType; DWORD VStart; DWORD PrimitiveCount; } D3DHAL_DP2DRAWPRIMITIVE; typedef D3DHAL_DP2DRAWPRIMITIVE *LPD3DHAL_DP2DRAWPRIMITIVE; typedef struct _D3DHAL_DP2DRAWINDEXEDPRIMITIVE { D3DPRIMITIVETYPE primType; INT BaseVertexIndex; // Vertex which corresponds to index 0 DWORD MinIndex; // Min vertex index in the vertex buffer DWORD NumVertices; // Number of vertices starting from MinIndex DWORD StartIndex; // Start index in the index buffer DWORD PrimitiveCount; } D3DHAL_DP2DRAWINDEXEDPRIMITIVE; typedef D3DHAL_DP2DRAWINDEXEDPRIMITIVE *LPD3DHAL_DP2DRAWINDEXEDPRIMITIVE; typedef struct _D3DHAL_CLIPPEDTRIANGLEFAN { DWORD FirstVertexOffset; // Offset in bytes in the current stream 0 DWORD dwEdgeFlags; DWORD PrimitiveCount; } D3DHAL_CLIPPEDTRIANGLEFAN; typedef D3DHAL_CLIPPEDTRIANGLEFAN *LPD3DHAL_CLIPPEDTRIANGLEFAN; typedef struct _D3DHAL_DP2DRAWPRIMITIVE2 { D3DPRIMITIVETYPE primType; DWORD FirstVertexOffset; // Offset in bytes in the stream 0 DWORD PrimitiveCount; } D3DHAL_DP2DRAWPRIMITIVE2; typedef D3DHAL_DP2DRAWPRIMITIVE2 *LPD3DHAL_DP2DRAWPRIMITIVE2; typedef struct _D3DHAL_DP2DRAWINDEXEDPRIMITIVE2 { D3DPRIMITIVETYPE primType; INT BaseVertexOffset; // Stream 0 offset of the vertex which // corresponds to index 0. This offset could be // negative, but when an index is added to the // offset the result is positive DWORD MinIndex; // Min vertex index in the vertex buffer DWORD NumVertices; // Number of vertices starting from MinIndex DWORD StartIndexOffset; // Offset of the start index in the index buffer DWORD PrimitiveCount; // Number of triangles (points, lines) } D3DHAL_DP2DRAWINDEXEDPRIMITIVE2; typedef D3DHAL_DP2DRAWINDEXEDPRIMITIVE2 *LPD3DHAL_DP2DRAWINDEXEDPRIMITIVE2; // Used by SetPixelShader and DeletePixelShader typedef struct _D3DHAL_DP2PIXELSHADER { // Pixel shader handle. // The handle could be 0, meaning that the current pixel shader is invalid // (not set). DWORD dwHandle; } D3DHAL_DP2PIXELSHADER; typedef D3DHAL_DP2PIXELSHADER *LPD3DHAL_DP2PIXELSHADER; typedef struct _D3DHAL_DP2CREATEPIXELSHADER { DWORD dwHandle; // Shader handle DWORD dwCodeSize; // Shader code size in bytes // Shader code follows } D3DHAL_DP2CREATEPIXELSHADER; typedef D3DHAL_DP2CREATEPIXELSHADER *LPD3DHAL_DP2CREATEPIXELSHADER; typedef struct _D3DHAL_DP2SETPIXELSHADERCONST { DWORD dwRegister; // Const register to start copying DWORD dwCount; // Number of 4-float vectors to copy // Data follows } D3DHAL_DP2SETPIXELSHADERCONST; typedef D3DHAL_DP2SETPIXELSHADERCONST *LPD3DHAL_DP2SETPIXELSHADERCONST; // Flags that can be supplied to DRAWRECTPATCH and DRAWTRIPATCH #define RTPATCHFLAG_HASSEGS 0x00000001L #define RTPATCHFLAG_HASINFO 0x00000002L typedef struct _D3DHAL_DP2DRAWRECTPATCH { DWORD Handle; DWORD Flags; // Optionally followed by D3DFLOAT[4] NumSegments and/or D3DRECTPATCH_INFO } D3DHAL_DP2DRAWRECTPATCH; typedef D3DHAL_DP2DRAWRECTPATCH *LPD3DHAL_DP2DRAWRECTPATCH; typedef struct _D3DHAL_DP2DRAWTRIPATCH { DWORD Handle; DWORD Flags; // Optionally followed by D3DFLOAT[3] NumSegments and/or D3DTRIPATCH_INFO } D3DHAL_DP2DRAWTRIPATCH; typedef D3DHAL_DP2DRAWTRIPATCH *LPD3DHAL_DP2DRAWTRIPATCH; typedef struct _D3DHAL_DP2VOLUMEBLT { DWORD dwDDDestSurface;// dest surface DWORD dwDDSrcSurface; // src surface DWORD dwDestX; // dest X (width) DWORD dwDestY; // dest Y (height) DWORD dwDestZ; // dest Z (depth) D3DBOX srcBox; // src box DWORD dwFlags; // blt flags } D3DHAL_DP2VOLUMEBLT; typedef D3DHAL_DP2VOLUMEBLT *LPD3DHAL_DP2VOLUMEBLT; typedef struct _D3DHAL_DP2BUFFERBLT { DWORD dwDDDestSurface; // dest surface DWORD dwDDSrcSurface; // src surface DWORD dwOffset; // Offset in the dest surface (in BYTES) D3DRANGE rSrc; // src range DWORD dwFlags; // blt flags } D3DHAL_DP2BUFFERBLT; typedef D3DHAL_DP2BUFFERBLT *LPD3DHAL_DP2BUFFERBLT; typedef struct _D3DHAL_DP2ADDDIRTYRECT { DWORD dwSurface; // Driver managed surface RECTL rDirtyArea; // Area marked dirty } D3DHAL_DP2ADDDIRTYRECT; typedef D3DHAL_DP2ADDDIRTYRECT *LPD3DHAL_DP2ADDDIRTYRECT; typedef struct _D3DHAL_DP2ADDDIRTYBOX { DWORD dwSurface; // Driver managed volume D3DBOX DirtyBox; // Box marked dirty } D3DHAL_DP2ADDDIRTYBOX; typedef D3DHAL_DP2ADDDIRTYBOX *LPD3DHAL_DP2ADDDIRTYBOX; ;end_if_(DIRECT3D_VERSION)_800 typedef struct _D3DHAL_DRAWPRIMITIVES2DATA { ULONG_PTR dwhContext; // in: Context handle DWORD dwFlags; // in: flags DWORD dwVertexType; // in: vertex type LPDDRAWI_DDRAWSURFACE_LCL lpDDCommands; // in: vertex buffer command data DWORD dwCommandOffset; // in: offset to start of vertex buffer commands DWORD dwCommandLength; // in: number of bytes of command data union { // based on D3DHALDP2_USERMEMVERTICES flag LPDDRAWI_DDRAWSURFACE_LCL lpDDVertex;// in: surface containing vertex data LPVOID lpVertices; // in: User mode pointer to vertices }; DWORD dwVertexOffset; // in: offset to start of vertex data DWORD dwVertexLength; // in: number of vertices of vertex data DWORD dwReqVertexBufSize; // in: number of bytes required for the next vertex buffer DWORD dwReqCommandBufSize; // in: number of bytes required for the next commnand buffer LPDWORD lpdwRStates; // in: Pointer to the array where render states are updated union { DWORD dwVertexSize; // in: Size of each vertex in bytes HRESULT ddrval; // out: return value }; DWORD dwErrorOffset; // out: offset in lpDDCommands to // first D3DHAL_COMMAND not handled } D3DHAL_DRAWPRIMITIVES2DATA; typedef D3DHAL_DRAWPRIMITIVES2DATA *LPD3DHAL_DRAWPRIMITIVES2DATA; // Macros to access vertex shader binary code #define D3DSI_GETREGTYPE(token) (token & D3DSP_REGTYPE_MASK) #define D3DSI_GETREGNUM(token) (token & D3DSP_REGNUM_MASK) #define D3DSI_GETOPCODE(command) (command & D3DSI_OPCODE_MASK) #define D3DSI_GETWRITEMASK(token) (token & D3DSP_WRITEMASK_ALL) #define D3DVS_GETSWIZZLECOMP(source, component) (source >> ((component << 1) + 16) & 0x3) #define D3DVS_GETSWIZZLE(token) (token & D3DVS_SWIZZLE_MASK) #define D3DVS_GETSRCMODIFIER(token) (token & D3DSP_SRCMOD_MASK) #define D3DVS_GETADDRESSMODE(token) (token & D3DVS_ADDRESSMODE_MASK) // Indicates that the lpVertices field in the DrawPrimitives2 data is // valid, i.e. user allocated memory. #define D3DHALDP2_USERMEMVERTICES 0x00000001L // Indicates that the command buffer and vertex buffer are a system memory execute buffer // resulting from the use of the Execute buffer API. #define D3DHALDP2_EXECUTEBUFFER 0x00000002L // The swap flags indicate if it is OK for the driver to swap the submitted buffers with new // buffers and asyncronously work on the submitted buffers. #define D3DHALDP2_SWAPVERTEXBUFFER 0x00000004L #define D3DHALDP2_SWAPCOMMANDBUFFER 0x00000008L // The requested flags are present if the new buffers which the driver can allocate need to be // of atleast a given size. If any of these flags are set, the corresponding dwReq* field in // D3DHAL_DRAWPRIMITIVES2DATA will also be set with the requested size in bytes. #define D3DHALDP2_REQVERTEXBUFSIZE 0x00000010L #define D3DHALDP2_REQCOMMANDBUFSIZE 0x00000020L // These flags are set by the driver upon return from DrawPrimitives2 indicating if the new // buffers are not in system memory. #define D3DHALDP2_VIDMEMVERTEXBUF 0x00000040L #define D3DHALDP2_VIDMEMCOMMANDBUF 0x00000080L // Used by the driver to ask runtime to parse the execute buffer #define D3DERR_COMMAND_UNPARSED MAKE_DDHRESULT(3000) typedef DWORD (CALLBACK *LPD3DHAL_CLEAR2CB) (LPD3DHAL_CLEAR2DATA); typedef DWORD (CALLBACK *LPD3DHAL_VALIDATETEXTURESTAGESTATECB)(LPD3DHAL_VALIDATETEXTURESTAGESTATEDATA); typedef DWORD (CALLBACK *LPD3DHAL_DRAWPRIMITIVES2CB) (LPD3DHAL_DRAWPRIMITIVES2DATA); typedef struct _D3DHAL_CALLBACKS3 { DWORD dwSize; // size of struct DWORD dwFlags; // flags for callbacks LPD3DHAL_CLEAR2CB Clear2; LPVOID lpvReserved; LPD3DHAL_VALIDATETEXTURESTAGESTATECB ValidateTextureStageState; LPD3DHAL_DRAWPRIMITIVES2CB DrawPrimitives2; } D3DHAL_CALLBACKS3; typedef D3DHAL_CALLBACKS3 *LPD3DHAL_CALLBACKS3; #define D3DHAL_CALLBACKS3SIZE sizeof(D3DHAL_CALLBACKS3) // bit definitions for D3DHAL #define D3DHAL3_CB32_CLEAR2 0x00000001L #define D3DHAL3_CB32_RESERVED 0x00000002L #define D3DHAL3_CB32_VALIDATETEXTURESTAGESTATE 0x00000004L #define D3DHAL3_CB32_DRAWPRIMITIVES2 0x00000008L /* -------------------------------------------------------------- * Texture stage renderstate mapping definitions. * * 256 renderstate slots [256, 511] are reserved for texture processing * stage controls, which provides for 8 texture processing stages each * with 32 DWORD controls. * * The renderstates within each stage are indexed by the * D3DTEXTURESTAGESTATETYPE enumerants by adding the appropriate * enumerant to the base for a given texture stage. * * Note, "state overrides" bias the renderstate by 256, so the two * ranges overlap. Overrides are enabled for exebufs only, so all * this means is that Texture3 cannot be used with exebufs. */ /* * Base of all texture stage state values in renderstate array. */ #define D3DHAL_TSS_RENDERSTATEBASE 256UL /* * Maximum number of stages allowed. */ #define D3DHAL_TSS_MAXSTAGES 8 /* * Number of state DWORDS per stage. */ #define D3DHAL_TSS_STATESPERSTAGE 64 /* * Texture handle's offset into the 32-DWORD cascade state vector */ #define D3DTSS_TEXTUREMAP 0 /* -------------------------------------------------------------- * Flags for the data parameters. */ /* * SceneCapture() * This is used as an indication to the driver that a scene is about to * start or end, and that it should capture data if required. */ #define D3DHAL_SCENE_CAPTURE_START 0x00000000L #define D3DHAL_SCENE_CAPTURE_END 0x00000001L /* * Execute() */ /* * Use the instruction stream starting at dwOffset. */ #define D3DHAL_EXECUTE_NORMAL 0x00000000L /* * Use the optional instruction override (diInstruction) and return * after completion. dwOffset is the offset to the first primitive. */ #define D3DHAL_EXECUTE_OVERRIDE 0x00000001L /* * GetState() * The driver will get passed a flag in dwWhich specifying which module * the state must come from. The driver then fills in ulArg[1] with the * appropriate value depending on the state type given in ddState. */ /* * The following are used to get the state of a particular stage of the * pipeline. */ #define D3DHALSTATE_GET_TRANSFORM 0x00000001L #define D3DHALSTATE_GET_LIGHT 0x00000002L #define D3DHALSTATE_GET_RENDER 0x00000004L /* -------------------------------------------------------------- * Return values from HAL functions. */ /* * The context passed in was bad. */ #define D3DHAL_CONTEXT_BAD 0x000000200L /* * No more contexts left. */ #define D3DHAL_OUTOFCONTEXTS 0x000000201L /* * Execute() and ExecuteClipped() */ /* * Executed to completion via early out. * (e.g. totally clipped) */ #define D3DHAL_EXECUTE_ABORT 0x00000210L /* * An unhandled instruction code was found (e.g. D3DOP_TRANSFORM). * The dwOffset parameter must be set to the offset of the unhandled * instruction. * * Only valid from Execute() */ #define D3DHAL_EXECUTE_UNHANDLED 0x00000211L // typedef for the Callback that the drivers can use to parse unknown commands // passed to them via the DrawPrimitives2 callback. The driver obtains this // callback thru a GetDriverInfo call with GUID_D3DParseUnknownCommandCallback // made by ddraw somewhere around the initialization time. typedef HRESULT (CALLBACK *PFND3DPARSEUNKNOWNCOMMAND) (LPVOID lpvCommands, LPVOID *lplpvReturnedCommand); #define D3DRENDERSTATE_EVICTMANAGEDTEXTURES 61 // DDI render state only to Evict textures #define D3DRENDERSTATE_SCENECAPTURE 62 // DDI only to replace SceneCapture #define D3DRS_DELETERTPATCH 169 // DDI only to delete high order patch //----------------------------------------------------------------------------- // // DirectX 8.0's new driver info querying mechanism. // // How to handle the new driver info query mechanism. // // DirectX 8.0 utilizes an extension to GetDriverInfo() to query for // additional information from the driver. Currently this mechanism is only // used for querying for DX8 style D3D caps but it may be used for other // information over time. // // This extension to GetDriverInfo takes the form of a GetDriverInfo call // with the GUID GUID_GetDriverInfo2. When a GetDriverInfo call with this // GUID is received by the driver the driver must check the data passed // in the lpvData field of the DD_GETDRIVERINFODATA data structure to see // what information is being requested. // // It is important to note that the GUID GUID_GetDriverInfo2 is, in fact, // the same as the GUID_DDStereoMode. If you driver doesn't handle // GUID_DDStereoMode this is not an issue. However, if you wish your driver // to handle GUID_DDStereoMode as well as GUID_GetDriverInfo2 special action // must be taken. When a call tp GetDriverInfo with the GUID // GUID_GetDriverInfo2/GUID_DDStereoMode is made the runtime sets the // dwHeight field of the DD_STEREOMODE structure to the special value // D3DGDI2_MAGIC. In this way you can determine when the request is a // stereo mode call or a GetDriverInfo2 call. The dwHeight field of // DD_STEREOMODE corresponds to the dwMagic field of the // DD_GETDRIVERINFO2DATA structure. // // The dwExpectedSize field of the DD_GETDRIVERINFODATA structure is not // used by when a GetDriverInfo2 request is being made and should be // ignored. The actual expected size of the data is found in the // dwExpectedSize of the DD_GETDRIVERINFO2DATA structure. // // Once the driver has determined that this is a call to // GetDriverInfo2 it must then determine the type of information being // requested by the runtime. This type is contained in the dwType field // of the DD_GETDRIVERINFO2DATA data structure. // // Finally, once the driver knows this is a GetDriverInfo2 request of a // particular type it can copy the requested data into the data buffer. // It is important to note that the lpvData field of the DD_GETDRIVERINFODATA // data structure points to data buffer in which to copy your data. lpvData // also points to the DD_GETDRIVERINFO2DATA structure. This means that the // data returned by the driver will overwrite the DD_GETDRIVERINFO2DATA // structure and, hence, the DD_GETDRIVERINFO2DATA structure occupies the // first few DWORDs of the buffer. // // The following code fragment demonstrates how to handle GetDriverInfo2. // // D3DCAPS8 myD3DCaps8; // // DWORD CALLBACK // DdGetDriverInfo(LPDDHAL_GETDRIVERINFODATA lpData) // { // if (MATCH_GUID((lpData->guidInfo), GUID_GetDriverInfo2) ) // { // ASSERT(NULL != lpData); // ASSERT(NULL != lpData->lpvData); // // // Is this a call to GetDriverInfo2 or DDStereoMode? // if (((DD_GETDRIVERINFO2DATA*)(lpData->lpvData))->dwMagic == D3DGDI2_MAGIC) // { // // Yes, its a call to GetDriverInfo2, fetch the // // DD_GETDRIVERINFO2DATA data structure. // DD_GETDRIVERINFO2DATA* pgdi2 = lpData->lpvData; // ASSERT(NULL != pgdi2); // // // What type of request is this? // switch (pgdi2->dwType) // { // case D3DGDI2_TYPE_GETD3DCAPS8: // { // // The runtime is requesting the DX8 D3D caps so // // copy them over now. // // // It should be noted that the dwExpectedSize field // // of DD_GETDRIVERINFODATA is not used for // // GetDriverInfo2 calls and should be ignored. // size_t copySize = min(sizeof(myD3DCaps8), pgdi2->dwExpectedSize); // memcpy(lpData->lpvData, &myD3DCaps8, copySize); // lpData->dwActualSize = copySize; // lpData->ddRVal = DD_OK; // return DDHAL_DRIVER_HANDLED; // } // default: // // For any other GetDriverInfo2 types not handled // // or understood by the driver set an ddRVal of // // DDERR_CURRENTLYNOTAVAIL and return // // DDHAL_DRIVER_HANDLED. // return DDHAL_DRIVER_HANDLED; // } // } // else // { // // It must be a call a request for stereo mode support. // // Fetch the stereo mode data // DD_STEREOMODE* pStereoMode = lpData->lpvData; // ASSERT(NULL != pStereoMode); // // // Process the stereo mode request... // lpData->dwActualSize = sizeof(DD_STEREOMODE); // lpData->ddRVal = DD_OK; // return DDHAL_DRIVER_HANDLED; // } // } // // // Handle any other device GUIDs... // // } // DdGetDriverInfo // //----------------------------------------------------------------------------- // // The data structure which is passed to the driver when GetDriverInfo is // called with a GUID of GUID_GetDriverInfo2. // // NOTE: Although the fields listed below are all read only this data // structure is actually the first four DWORDs of the data buffer into // which the driver writes the requested infomation. As such, these fields // (and the entire data structure) are overwritten by the data returned by // the driver. // typedef struct _DD_GETDRIVERINFO2DATA { DWORD dwReserved; // Reserved Field. // Driver should not read or write this field. DWORD dwMagic; // Magic Number. Has the value D3DGDI2_MAGIC if // this is a GetDriverInfo2 call. Otherwise // this structure is, in fact, a DD_STEREOMODE // call. // Driver should only read this field. DWORD dwType; // Type of information requested. This field // contains one of the DDGDI2_TYPE_ #defines // listed below. // Driver should only read (not write) this // field. DWORD dwExpectedSize; // Expected size of the information requested. // Driver should only read (not write) this // field. // The remainder of the data buffer (beyond the first four DWORDs) // follows here. } DD_GETDRIVERINFO2DATA; // // IMPORTANT NOTE: This GUID has exactly the same value as GUID_DDStereoMode // and as such you must be very careful when using it. If your driver needs // to handle both GetDriverInfo2 and DDStereoMode it must have a single // check for the shared GUID and then distinguish between which use of that // GUID is being requested. // #define GUID_GetDriverInfo2 (GUID_DDStereoMode) // // Magic value used to determine whether a GetDriverInfo call with the // GUID GUID_GetDriverInfo2/GUID_DDStereoMode is a GetDriverInfo2 request // or a query about stereo capabilities. This magic number is stored in // the dwHeight field of the DD_STEREOMODE data structure. // #define D3DGDI2_MAGIC (0xFFFFFFFFul) // // The types of information which can be requested from the driver via // GetDriverInfo2. // #define D3DGDI2_TYPE_GETD3DCAPS8 (0x00000001ul) // Return the D3DCAPS8 data #define D3DGDI2_TYPE_GETFORMATCOUNT (0x00000002ul) // Return the number of supported formats #define D3DGDI2_TYPE_GETFORMAT (0x00000003ul) // Return a particular format #define D3DGDI2_TYPE_DXVERSION (0x00000004ul) // Notify driver of current DX Version #define D3DGDI2_TYPE_DEFERRED_AGP_AWARE (0x00000018ul) // Runtime is aware of deferred AGP frees, and will send following (NT only) #define D3DGDI2_TYPE_FREE_DEFERRED_AGP (0x00000019ul) // Free any deferred-freed AGP allocations for this process (NT only) #define D3DGDI2_TYPE_DEFER_AGP_FREES (0x00000020ul) // Start defering AGP frees for this process // // This data structure is returned by the driver in response to a // GetDriverInfo2 query with the type D3DGDI2_TYPE_GETFORMATCOUNT. It simply // gives the number of surface formats supported by the driver. Currently this // structure consists of a single member giving the number of supported // surface formats. // typedef struct _DD_GETFORMATCOUNTDATA { DD_GETDRIVERINFO2DATA gdi2; // [in/out] GetDriverInfo2 data DWORD dwFormatCount; // [out] Number of supported surface formats DWORD dwReserved; // Reserved } DD_GETFORMATCOUNTDATA; // // This data structure is used to request a specific surface format from the // driver. It is guaranteed that the requested format will be greater than or // equal to zero and less that the format count reported by the driver from // the preceeding D3DGDI2_TYPE_GETFORMATCOUNT request. // typedef struct _DD_GETFORMATDATA { DD_GETDRIVERINFO2DATA gdi2; // [in/out] GetDriverInfo2 data DWORD dwFormatIndex; // [in] The format to return DDPIXELFORMAT format; // [out] The actual format } DD_GETFORMATDATA; // // This data structure is used to notify drivers about the DirectX version // number. This is the value that is denoted as DD_RUNTIME_VERSION in the // DDK headers. // typedef struct _DD_DXVERSION { DD_GETDRIVERINFO2DATA gdi2; // [in/out] GetDriverInfo2 data DWORD dwDXVersion; // [in] The Version of DX DWORD dwReserved; // Reserved } DD_DXVERSION; // Informs driver that runtime will send a notification after last outstanding AGP // lock has been released. typedef struct _DD_DEFERRED_AGP_AWARE_DATA { DD_GETDRIVERINFO2DATA gdi2; // [in/out] GetDriverInfo2 data } DD_DEFERRED_AGP_AWARE_DATA; // Notification that the last AGP lock has been released. Driver can free all deferred AGP // allocations for this process. typedef struct _DD_FREE_DEFERRED_AGP_DATA { DD_GETDRIVERINFO2DATA gdi2; // [in/out] GetDriverInfo2 data DWORD dwProcessId; // [in] Process ID for whom to free deferred AGP } DD_FREE_DEFERRED_AGP_DATA; // New Caps that are not API visible that the driver exposes. #define D3DDEVCAPS_HWVERTEXBUFFER 0x02000000L /* Device supports Driver Allocated Vertex Buffers*/ #define D3DDEVCAPS_HWINDEXBUFFER 0x04000000L /* Device supports Driver Allocated Index Buffers*/ #define D3DDEVCAPS_SUBVOLUMELOCK 0x08000000L /* Device supports locking a part of volume texture*/ #ifndef D3DPMISCCAPS_FOGINFVF #define D3DPMISCCAPS_FOGINFVF 0x00002000L /* Device supports separate fog value in the FVF */ #endif #ifndef D3DFVF_FOG #define D3DFVF_FOG 0x00002000L /* There is a separate fog value in the FVF vertex */ #endif // // This stuff is not API visible but should be DDI visible. // Should be in Sync with d3d8types.h // #define D3DFMT_D32 (D3DFORMAT)71 #define D3DFMT_S1D15 (D3DFORMAT)72 #define D3DFMT_D15S1 (D3DFORMAT)73 #define D3DFMT_S8D24 (D3DFORMAT)74 #define D3DFMT_D24S8 (D3DFORMAT)75 #define D3DFMT_X8D24 (D3DFORMAT)76 #define D3DFMT_D24X8 (D3DFORMAT)77 #define D3DFMT_X4S4D24 (D3DFORMAT)78 #define D3DFMT_D24X4S4 (D3DFORMAT)79 // Vertex Shader 1.1 register limits. D3D device must provide at least // specified number of registers // #define D3DVS_INPUTREG_MAX_V1_1 16 #define D3DVS_TEMPREG_MAX_V1_1 12 // This max required number. Device could have more registers. Check caps. #define D3DVS_CONSTREG_MAX_V1_1 96 #define D3DVS_TCRDOUTREG_MAX_V1_1 8 #define D3DVS_ADDRREG_MAX_V1_1 1 #define D3DVS_ATTROUTREG_MAX_V1_1 2 #define D3DVS_MAXINSTRUCTIONCOUNT_V1_1 128 // Pixel Shader DX8 register limits. D3D device will have at most these // specified number of registers // #define D3DPS_INPUTREG_MAX_DX8 8 #define D3DPS_TEMPREG_MAX_DX8 8 #define D3DPS_CONSTREG_MAX_DX8 16 #define D3DPS_TEXTUREREG_MAX_DX8 8 #endif /* _D3DHAL_H */