0419 COMMON 00000006 0038 0001 U 0000 "Incorrect DOS version",CR,LF 0002 U 0000 "%1 already installed",CR,LF 0003 U 0000 "%1 bytes available on disk",CR,LF 0004 U 0000 "%1 bytes free",CR,LF 0005 U 0000 "%1 bytes in bad sectors",CR,LF 0006 U 0000 "%1 bytes total disk space",CR,LF 0007 U 0000 "%1 bytes total memory",CR,LF 0008 U 0000 "%1 bytes used by system",CR,LF 0009 U 0000 "%1 installed",CR,LF 0010 U 0000 "%1 not installed",CR,LF 0011 U 0000 "%1 not installed",CR,LF 0012 U 0000 "Cannot %1 a network drive",CR,LF 0013 U 0000 "", 0014 U 0000 "Cannot %1 a SUBSTed or ASSIGNed drive",CR,LF 0015 U 0000 "Cannot execute %1",CR,LF 0016 U 0000 "Expanded Memory not available",CR,LF 0017 U 0000 "File allocation table bad, drive %1",CR,LF 0018 U 0000 "File cannot be copied onto itself",CR,LF 0019 U 0000 "Insert target disk in drive %1",CR,LF 0020 U 0000 "Insufficient disk space",CR,LF 0021 U 0000 "Invalid characters in volume label",CR,LF 0022 U 0000 "Invalid code page",CR,LF 0023 U 0000 "Invalid date",CR,LF 0024 U 0000 "Invalid time",CR,LF 0025 U 0000 "Invalid path",CR,LF 0026 U 0000 "No source drive specified",CR,LF 0027 U 0000 "No target drive specified",CR,LF 0028 U 0000 "Press any key to continue . . .",CR,LF 0029 U 0000 "Source path required",CR,LF 0030 U 0000 "System transferred",CR,LF 0031 U 0000 "", 0032 U 0000 "Unable to create directory",CR,LF 0033 U 0000 "Volume in drive %1 has no label",CR,LF 0034 U 0000 "Volume in drive %1 is %2",CR,LF 0035 U 0001 "Volume label (11 characters, ENTER for none)? " 0036 U 0000 "Volume Serial Number is %1-%2",CR,LF 0037 U 0000 "Incorrect file type",CR,LF 0038 U 0001 CR,LF EXTEND 00000689 0090 0001 U 0003 "Invalid function" 0002 U 0000 "File not found" 0003 U 0000 "Path not found" 0004 U 0000 "Too many open files" 0005 U 0000 "Access denied " 0006 U 0000 "Invalid handle" 0007 U 0000 "Memory control blocks destroyed" 0008 U 0000 "Insufficient memory" 0009 U 0000 "Invalid memory block address" 0010 U 0000 "Invalid Environment" 0011 U 0000 "Invalid format" 0012 U 0000 "Invalid function parameter" 0013 U 0000 "Invalid data" 0014 U 0000 "", 0015 U 0000 "Invalid drive specification" 0016 U 0000 "Attempt to remove current directory" 0017 U 0000 "Not same device" 0018 U 0000 "No more files" 0019 U 0000 "Write protect error" 0020 U 0000 "Invalid unit" 0021 U 0000 "Not ready" 0022 U 0000 "Invalid device request" 0023 U 0000 "Data error" 0024 U 0000 "Invalid device request parameters" 0025 U 0000 "Seek error" 0026 U 0000 "Invalid media type" 0027 U 0000 "Sector not found" 0028 U 0000 "Printer out of paper error" 0029 U 0000 "Write fault error" 0030 U 0000 "Read fault error" 0031 U 0000 "General failure" 0032 U 0000 "Sharing violation" 0033 U 0000 "Lock violation" 0034 U 0000 "Invalid disk change" 0035 U 0000 "FCB unavailable" 0036 U 0000 "System resource exhausted" 0037 U 0000 "Code page mismatch" 0038 U 0000 "Out of input" 0039 U 0000 "Insufficient disk space" 0040 U 0000 "", 0041 U 0000 "", 0042 U 0000 "", 0043 U 0000 "", 0044 U 0000 "", 0045 U 0000 "", 0046 U 0000 "", 0047 U 0000 "", 0048 U 0000 "", 0049 U 0000 "", 0050 U 0000 "NET809: Network request not supported" 0051 U 0000 "NET801: Remote computer not listening" 0052 U 0000 "NET802: Duplicate name on network" 0053 U 0000 "NET803: Network path not found" 0054 U 0000 "NET804: Network busy" 0055 U 0000 "NET805: Network device no longer exists" 0056 U 0000 "NET806: NETBIOS command limit exceeded" 0057 U 0000 "NET807: System error; NETBIOS error" 0058 U 0000 "NET808: Incorrect response from network" 0059 U 0000 "NET810: Unexpected network error" 0060 U 0000 "NET811: Incompatible remote adapter" 0061 U 0000 "NET812: Print queue full" 0062 U 0000 "NET813: Not enough space for print file" 0063 U 0000 "NET814: Print file was cancelled" 0064 U 0000 "NET815: Network name was deleted" 0065 U 0000 "Access denied" 0066 U 0000 "NET817: Network device type incorrect" 0067 U 0000 "NET818: Network name not found" 0068 U 0000 "NET819: Network name limit exceeded" 0069 U 0000 "NET820: NETBIOS session limit exceeded" 0070 U 0000 "NET821: Sharing temporarily paused" 0071 U 0000 "NET823: Network request not accepted" 0072 U 0000 "NET822: Print or disk redirection is paused" 0073 U 0000 "NET476: Netbeui not loaded" 0074 U 0000 "NET477: Unexpected adapter close" 0075 U 0000 "", 0076 U 0000 "", 0077 U 0004 "", 0078 U 0004 "", 0079 U 0004 "", 0080 U 0004 "File exists" 0081 U 0004 "", 0082 U 0004 "Cannot make directory entry" 0083 U 0004 "Fail on INT 24" 0084 U 0004 "Too many redirections" 0085 U 0004 "Duplicate redirection" 0086 U 0004 "Invalid password" 0087 U 0004 "Invalid parameter" 0088 U 0004 "Network data fault" 0089 U 0004 "Function not supported by network" 0090 U 0002 "Required system component not installed" PARSE 0000131d 0011 0001 U 0000 "Too many parameters" 0002 U 0000 "Required parameter missing" 0003 U 0000 "Invalid switch" 0004 U 0000 "Invalid keyword" 0005 U 0000 "", 0006 U 0000 "Parameter value not in allowed range" 0007 U 0000 "Parameter value not allowed" 0008 U 0000 "Parameter value not allowed" 0009 U 0000 "Parameter format not correct" 0010 U 0000 "Invalid parameter" 0011 U 0000 "Invalid parameter combination" COMMAND 000014d4 0147 1002 U 0000 "Duplicate file name or file not found",CR,LF 1003 U 0000 "Invalid path or file name",CR,LF 1007 U 0000 "Out of environment space",CR,LF 1008 U 0000 "File creation error",CR,LF 1009 U 0000 "Batch file missing",CR,LF 1010 U 0000 CR,LF,"Insert disk with batch file",CR,LF 1011 U 0000 "Bad command or file name",CR,LF 1016 U 0000 "Content of destination lost before copy",CR,LF 1017 U 0000 "Invalid filename or file not found",CR,LF 1018 U 0000 "%1 file(s) copied",CR,LF 1019 U 0000 "%1 file(s) " 1022 U 0000 "Code page %1 not prepared for system",CR,LF 1023 U 0000 "Code page %1 not prepared for all devices",CR,LF 1024 U 0000 "Active code page: %1",CR,LF 1025 U 0000 "NLSFUNC not installed",CR,LF 1027 U 0000 "Current drive is no longer valid" 1029 U 0000 "Label not found",CR,LF 1030 U 0000 "Syntax error",CR,LF 1032 U 0000 "Current date is %1 %2",CR,LF 1033 U 0000 "SunMonTueWedThuFriSat" 1034 U 0000 "Enter new date (%1): " 1036 U 0000 "Current time is %1",CR,LF 1037 U 0000 "Enter new time: " 1038 U 0000 ", Delete (Y/N)?" 1039 U 0000 "All files in directory will be deleted!",CR,LF,"Are you sure (Y/N)?" 1040 U 0000 "MS-DOS Version %1.%2.500" 1044 U 0000 "Invalid directory",CR,LF 1046 U 0000 "Invalid path, not directory,",CR,LF,"or directory not empty",CR,LF 1047 U 0000 "Must specify ON or OFF",CR,LF 1048 U 0000 "Directory of %1",CR,LF 1049 U 0000 "No Path",CR,LF 1050 U 0000 "Invalid drive in search path",CR,LF 1051 U 0000 "Invalid device",CR,LF 1052 U 0000 "FOR cannot be nested",CR,LF 1053 U 0000 "Intermediate file error during pipe",CR,LF 1054 U 0000 "Cannot do binary reads from a device",CR,LF 1055 U 0000 "BREAK is %1",CR,LF 1056 U 0000 "VERIFY is %1",CR,LF 1057 U 0000 "ECHO is %1",CR,LF 1059 U 0000 "off",0 1060 U 0000 "on",0 1061 U 0000 "Error writing to device",CR,LF 1063 U 0000 "%1" 1064 U 0000 "%1" 1065 U 0000 "%1" 1066 U 0000 "%1" 1067 U 0000 9 1068 U 0000 " " 1069 U 0000 8," ",8 1070 U 0000 CR,LF 1071 U 0000 "%1" 1072 U 0000 "mm-dd-yy" 1073 U 0000 "dd-mm-yy" 1074 U 0000 "yy-mm-dd" 1075 U 0000 "%1 %2" 1076 U 0000 "%1" 1077 U 0000 " %1 %2" 1078 U 0000 "Directory already exists",CR,LF 1079 U 0000 "%1 bytes",CR,LF 1080 U 0000 "Total files listed:",CR,LF 1081 U 0000 "(Error occurred in environment variable)",CR,LF 1084 U 0000 "(continuing %1)" 1090 U 0000 "Revision %1",CR,LF 1091 U 0000 "DOS is in ROM" 1092 U 0000 "DOS is in HMA" 1093 U 0000 "DOS is in low memory" 1094 U 0000 "Cannot Loadhigh batch file",CR,LF 1095 U 0000 "LoadHigh: Invalid filename",CR,LF 1096 U 0000 "Cannot open specified country information file",CR,LF 1300 U 0000 "Sets or clears extended CTRL+C checking.",CR,LF,CR,LF "BREAK [ON | OFF]",CR,LF,CR,LF "Type BREAK without a parameter to display the current BREAK setting.",CR,LF 1320 U 0000 "Displays or sets the active code page number.",CR,LF,CR,LF "CHCP [nnn]",CR,LF,CR,LF 1321 U 0000 " nnn Specifies a code page number.",CR,LF,CR,LF "Type CHCP without a parameter to display the active code page number.",CR,LF 1340 U 0000 "Displays the name of or changes the current directory.",CR,LF,CR,LF "CHDIR [drive:][path]",CR,LF "CHDIR[..]",CR,LF 1341 U 0000 "CD [drive:][path]",CR,LF "CD[..]",CR,LF,CR,LF " .. Specifies that you want to change to the parent directory.",CR,LF,CR,LF 1342 U 0000 "Type CD drive: to display the current directory in the specified drive.",CR,LF "Type CD without parameters to display the current drive and directory.",CR,LF 1360 U 0000 "Clears the screen.",CR,LF,CR,LF "CLS",CR,LF 1400 U 0000 "Copies one or more files to another location.",CR,LF,CR,LF "COPY [/A | /B] source [/A | /B] [+ source [/A | /B] [+ ...]] [destination",CR,LF " [/A | /B]] [/V]",CR,LF,CR,LF 1401 U 0000 " source Specifies the file or files to be copied.",CR,LF " /A Indicates an ASCII text file.",CR,LF 1402 U 0000 " /B Indicates a binary file.",CR,LF " destination Specifies the directory and/or filename for the new file(s).",CR,LF 1403 U 0000 " /V Verifies that new files are written correctly.",CR,LF,CR,LF 1404 U 0000 "To append files, specify a single file for destination, but multiple files",CR,LF "for source (using wildcards or file1+file2+file3 format).",CR,LF 1420 U 0000 "Changes the terminal device used to control your system.",CR,LF,CR,LF "CTTY device",CR,LF,CR,LF " device The terminal device you want to use, such as COM1.",CR,LF 1440 U 0000 "Displays or sets the date.",CR,LF,CR,LF "DATE [date]",CR,LF,CR,LF 1441 U 0000 "Type DATE without parameters to display the current date setting and",CR,LF "a prompt for a new one. Press ENTER to keep the same date.",CR,LF 1460 U 0000 "Deletes one or more files.",CR,LF,CR,LF "DEL [drive:][path]filename [/P]",CR,LF "ERASE [drive:][path]filename [/P]",CR,LF,CR,LF 1461 U 0000 " [drive:][path]filename Specifies the file(s) to delete. Specify multiple",CR,LF " files by using wildcards.",CR,LF 1462 U 0000 " /P Prompts for confirmation before deleting each file.",CR,LF 1480 U 0000 "Displays a list of files and subdirectories in a directory.",CR,LF,CR,LF "DIR [drive:][path][filename] [/P] [/W] [/A[[:]attributes]]",CR,LF " [/O[[:]sortorder]] [/S] [/B] [/L]",CR,LF,CR,LF 1481 U 0000 " [drive:][path][filename]",CR,LF " Specifies drive, directory, and/or files to list.",CR,LF 1482 U 0000 " /P Pauses after each screenful of information.",CR,LF " /W Uses wide list format.",CR,LF 1483 U 0000 " /A Displays files with specified attributes.",CR,LF " attributes D Directories R Read-only files",CR,LF 1484 U 0000 " H Hidden files A Files ready for archiving",CR,LF " S System files - Prefix meaning ""not""",CR,LF " /O List by files in sorted order.",CR,LF 1485 U 0000 " sortorder N By name (alphabetic) S By size (smallest first)",CR,LF " E By extension (alphabetic) D By date & time (earliest first)",CR,LF 1486 U 0000 " G Group directories first - Prefix to reverse order",CR,LF " /S Displays files in specified directory and all subdirectories.",CR,LF 1487 U 0000 " /B Uses bare format (no heading information or summary).",CR,LF " /L Uses lowercase.",CR,LF,CR,LF 1488 U 0000 "Switches may be preset in the DIRCMD environment variable. Override",CR,LF "preset switches by prefixing any switch with - (hyphen)--for example, /-W.",CR,LF 1500 U 0000 "Quits the COMMAND.COM program (command interpreter).",CR,LF,CR,LF "EXIT",CR,LF 1520 U 0000 "Creates a directory.",CR,LF,CR,LF "MKDIR [drive:]path",CR,LF "MD [drive:]path",CR,LF 1540 U 0000 "Displays or sets a search path for executable files.",CR,LF,CR,LF "PATH [[drive:]path[;...]]",CR,LF "PATH ;",CR,LF,CR,LF 1541 U 0000 "Type PATH ; to clear all search-path settings and direct MS-DOS to search",CR,LF "only in the current directory.",CR,LF 1542 U 0000 "Type PATH without parameters to display the current path.",CR,LF 1560 U 0000 "Changes the MS-DOS command prompt.",CR,LF,CR,LF "PROMPT [text]",CR,LF,CR,LF 1561 U 0000 " text Specifies a new command prompt.",CR,LF,CR,LF "Prompt can be made up of normal characters and the following special codes:",CR,LF,CR,LF 1562 U 0000 " $Q = (equal sign)",CR,LF " $$ $ (dollar sign)",CR,LF 1563 U 0000 " $T Current time",CR,LF " $D Current date",CR,LF 1564 U 0000 " $P Current drive and path",CR,LF " $V MS-DOS version number",CR,LF 1565 U 0000 " $N Current drive",CR,LF " $G > (greater-than sign)",CR,LF 1566 U 0000 " $L < (less-than sign)",CR,LF " $B | (pipe)",CR,LF 1567 U 0000 " $H Backspace (erases previous character)",CR,LF " $E Escape code (ASCII code 27)",CR,LF " $_ Carriage return and linefeed",CR,LF,CR,LF 1568 U 0000 "Type PROMPT without parameters to reset the prompt to the default setting.",CR,LF 1580 U 0000 "Removes (deletes) a directory.",CR,LF,CR,LF "RMDIR [drive:]path",CR,LF "RD [drive:]path",CR,LF 1600 U 0000 "Renames a file or files.",CR,LF,CR,LF 1601 U 0000 "RENAME [drive:][path]filename1 filename2",CR,LF "REN [drive:][path]filename1 filename2",CR,LF,CR,LF 1602 U 0000 "Note that you cannot specify a new drive or path for your destination file.",CR,LF 1620 U 0000 "Displays, sets, or removes MS-DOS environment variables.",CR,LF,CR,LF "SET [variable=[string]]",CR,LF,CR,LF 1621 U 0000 " variable Specifies the environment-variable name.",CR,LF " string Specifies a series of characters to assign to the variable.",CR,LF,CR,LF 1622 U 0000 "Type SET without parameters to display the current environment variables.",CR,LF 1640 U 0000 "Displays or sets the system time.",CR,LF,CR,LF "TIME [time]",CR,LF,CR,LF 1641 U 0000 "Type TIME with no parameters to display the current time setting and a prompt",CR,LF "for a new one. Press ENTER to keep the same time.",CR,LF 1660 U 0000 "Displays the contents of a text file.",CR,LF,CR,LF "TYPE [drive:][path]filename",CR,LF 1680 U 0000 "Displays the MS-DOS version.",CR,LF,CR,LF "VER",CR,LF 1700 U 0000 "Tells MS-DOS whether to verify that your files are written correctly to a",CR,LF "disk.",CR,LF,CR,LF "VERIFY [ON | OFF]",CR,LF,CR,LF "Type VERIFY without a parameter to display the current VERIFY setting.",CR,LF 1720 U 0000 "Displays the disk volume label and serial number, if they exist.",CR,LF,CR,LF "VOL [drive:]",CR,LF 1740 U 0000 "Calls one batch program from another.",CR,LF,CR,LF "CALL [drive:][path]filename [batch-parameters]",CR,LF,CR,LF 1741 U 0000 " batch-parameters Specifies any command-line information required by the",CR,LF " batch program.",CR,LF 1760 U 0000 "Records comments (remarks) in a batch file or CONFIG.SYS.",CR,LF,CR,LF "REM [comment]",CR,LF 1780 U 0000 "Suspends processing of a batch program and displays the message ""Press any",CR,LF "key to continue....""",CR,LF,CR,LF "PAUSE",CR,LF 1800 U 0000 "Displays messages, or turns command-echoing on or off.",CR,LF,CR,LF " ECHO [ON | OFF]",CR,LF 1801 U 0000 " ECHO [message]",CR,LF,CR,LF "Type ECHO without parameters to display the current echo setting.",CR,LF 1820 U 0000 "Directs MS-DOS to a labelled line in a batch program.",CR,LF,CR,LF "GOTO label",CR,LF,CR,LF 1821 U 0000 " label Specifies a text string used in the batch program as a label.",CR,LF,CR,LF "You type a label on a line by itself, beginning with a colon.",CR,LF 1840 U 0000 "Changes the position of replaceable parameters in a batch file.",CR,LF,CR,LF "SHIFT",CR,LF 1860 U 0000 "Performs conditional processing in batch programs.",CR,LF,CR,LF "IF [NOT] ERRORLEVEL number command",CR,LF 1861 U 0000 "IF [NOT] string1==string2 command",CR,LF "IF [NOT] EXIST filename command",CR,LF,CR,LF 1862 U 0000 " NOT Specifies that MS-DOS should carry out the command only",CR,LF " if the condition is false.",CR,LF 1863 U 0000 " ERRORLEVEL number Specifies a true condition if the last program run returned",CR,LF " an exit code equal to or greater than the number specified.",CR,LF 1864 U 0000 " command Specifies the command to carry out if the condition is",CR,LF " met.",CR,LF 1865 U 0000 " string1==string2 Specifies a true condition if the specified text strings",CR,LF " match.",CR,LF 1866 U 0000 " EXIST filename Specifies a true condition if the specified filename",CR,LF " exists.",CR,LF 1880 U 0000 "Runs a specified command for each file in a set of files.",CR,LF,CR,LF "FOR %variable IN (set) DO command [command-parameters]",CR,LF,CR,LF 1881 U 0000 " %variable Specifies a replaceable parameter.",CR,LF " (set) Specifies a set of one or more files. Wildcards may be used.",CR,LF 1882 U 0000 " command Specifies the command to carry out for each file.",CR,LF " command-parameters",CR,LF 1883 U 0000 " Specifies parameters or switches for the specified command.",CR,LF,CR,LF "To use the FOR command in a batch program, specify %%variable instead of",CR,LF "%variable.",CR,LF 1900 U 0000 "Reserved command name",CR,LF 1920 U 0000 "Loads a program into the upper memory area.",CR,LF,CR,LF 1921 U 0000 "LOADHIGH [drive:][path]filename [parameters]",CR,LF "LH [drive:][path]filename [parameters]",CR,LF,CR,LF 1922 U 0000 " parameters Specifies any command-line information required by the",CR,LF " program you want to load.",CR,LF ANSI 000046c4 0001 0010 U 0000 "Invalid parameter - %1",CR,LF APPEND 00004708 0026 0001 U 0000 "Incorrect APPEND version",CR,LF 0002 U 0000 "Invalid path",CR,LF 0003 U 0000 "Invalid parameter",CR,LF 0004 U 0000 "Invalid combination of parameters",CR,LF 0005 U 0000 "No Append",CR,LF 0006 U 0000 "APPEND / ASSIGN Conflict",CR,LF 0007 U 0000 "APPEND / TopView Conflict",CR,LF 0008 U 0000 "Incorrect DOS version",CR,LF 0009 U 0000 "APPEND already installed",CR,LF 0300 U 0000 "Allows programs to open data files in specified directories as if they were in",CR,LF 0301 U 0000 "the current directory.",CR,LF,CR,LF 0302 U 0000 "APPEND [[drive:]path[;...]] [/X[:ON | :OFF]] [/PATH:ON | /PATH:OFF] [/E]",CR,LF 0303 U 0000 "APPEND ;",CR,LF,CR,LF 0304 U 0000 " [drive:]path Specifies a drive and directory to append.",CR,LF 0305 U 0000 " /X:ON Applies appended directories to file searches and",CR,LF 0306 U 0000 " application execution.",CR,LF 0307 U 0000 " /X:OFF Applies appended directories only to requests to open files.",CR,LF 0308 U 0000 " /X:OFF is the default setting.",CR,LF 0309 U 0000 " /PATH:ON Applies appended directories to file requests that already",CR,LF 0310 U 0000 " specify a path. /PATH:ON is the default setting.",CR,LF 0311 U 0000 " /PATH:OFF Turns off the effect of /PATH:ON.",CR,LF 0312 U 0000 " /E Stores a copy of the appended directory list in an environment",CR,LF 0313 U 0000 " variable named APPEND. /E may be used only the first time",CR,LF 0314 U 0000 " you use APPEND after starting your system.",CR,LF,CR,LF 0315 U 0000 "Type APPEND ; to clear the appended directory list.",CR,LF 0316 U 0000 "Type APPEND without parameters to display the appended directory list.",CR,LF BACKUP 00004df6 0040 0002 U 0000 CR,LF,"Insufficient memory",CR,LF 0006 U 0000 CR,LF,"Invalid drive specification",CR,LF 0014 U 0000 CR,LF,"Source and target drives are the same",CR,LF 0015 U 0001 CR,LF,"Error executing FORMAT",CR,LF 0016 U 0001 CR,LF,"Cannot find FORMAT.COM",CR,LF 0017 U 0000 CR,LF,"Error opening logfile",CR,LF 0018 U 0000 CR,LF,"Logging to file %1",CR,LF 0019 U 0000 CR,LF,"Last backup diskette not inserted",CR,LF 0020 U 0000 CR,LF,"WARNING! Files in the target drive",CR,LF "%1:\ root directory will be erased",CR,LF 0021 U 0000 CR,LF,"WARNING! Files in the target drive",CR,LF "%1:\BACKUP directory will be erased",CR,LF 0022 U 0000 CR,LF,"*** Backing up files to drive %1: ***",CR,LF 0023 U 0000 "Diskette Number: %1",CR,LF 0024 U 0000 CR,LF,"WARNING! No files were found to back up",CR,LF 0025 U 0000 CR,LF,"Insert backup source diskette in drive %1:",CR,LF 0026 U 0000 CR,LF,"Insert backup diskette %1 in drive %2:",CR,LF 0027 U 0000 CR,LF,"*** Not able to backup file ***",CR,LF 0028 U 0000 CR,LF,"Insert last backup diskette in drive %1:",CR,LF 0029 U 0000 CR,LF,"Target cannot be used for backup",CR,LF 0030 U 0000 CR,LF,"*** Last file not backed up ***",CR,LF 0031 U 0000 CR,LF,"Fixed backup device %1: is full",CR,LF 0032 U 0000 CR,LF,"Disk full error writing to BACKUP Log File",CR,LF 0034 U 0000 CR,LF 0035 U 0001 CR,LF,"Cannot FORMAT nonremovable drive %1:",CR,LF 0040 U 0000 CR, LF, "Because your source drive is either ASSIGNed, JOINed, or SUBSTed", CR, LF, "it is actually the same as the target drive", CR, LF 0041 U 0000 CR, LF, "Because your target drive is either ASSIGNed, JOINed, or SUBSTed", CR, LF, "it is actually the same as the source drive", CR, LF 0042 U 0000 "Your target diskette is unformatted and " 0043 U 0000 "No FORMAT program was found.",CR,LF "Do you have another diskette with FORMAT on it (Y/N)? " 0044 U 0000 CR,LF,"Insert the diskette with FORMAT in drive A:",CR,LF 0045 U 0000 CR,LF,"Do you want to continue by inserting a new disk (Y/N)? " 0300 U 0000 "Backs up one or more files from one disk to another.",CR,LF,CR,LF 0301 U 0000 "BACKUP source destination-drive: [/S] [/M] [/A] [/F[:size]]",CR,LF " [/D:date[/T:time]] [/L[:[drive:][path]logfile]]",CR,LF,CR,LF 0302 U 0000 " source Specifies the file(s), drive, or directory to back up.",CR,LF 0303 U 0000 " destination-drive: Specifies the drive to save backup copies onto.",CR,LF 0304 U 0000 " /S Backs up contents of subdirectories.",CR,LF 0305 U 0000 " /M Backs up only files that have changed since the last",CR,LF " backup.",CR,LF 0306 U 0000 " /A Adds backup files to an existing backup disk.",CR,LF 0307 U 0000 " /F:[size] Specifies the size of the disk to be formatted.",CR,LF 0308 U 0000 " /D:date Backs up only files changed on or after the specified",CR,LF " date.",CR,LF 0309 U 0000 " /T:time Backs up only files changed at or after the specified",CR,LF " time.",CR,LF 0310 U 0000 " /L[:[drive:][path]logfile]",CR,LF " Creates a log file and entry to record the backup",CR,LF " operation.",CR,LF DEBUG 00005ace 0068 0004 U 0000 "Allocation failed or specified buffer too small",CR,LF 0006 U 0000 "Bad device name" 0007 U 0000 "Cannot open list device PRN",CR,LF "Enter name of list device? " 0008 U 0000 CR,LF 0009 U 0000 CR,LF,"Program terminated normally",CR,LF 0010 U 0001 "Invalid drive specification",CR,LF 0012 U 0001 "File creation error",CR,LF 0013 U 0001 "Insufficient space on disk",CR,LF 0014 U 0001 "Disk error reading drive %1",CR,LF 0015 U 0001 "Disk error writing drive %1",CR,LF 0016 U 0001 "Write protect error reading drive %1",CR,LF 0017 U 0001 "Write protect error writing drive %1",CR,LF 0019 U 0000 "%1^ Error" 0020 U 0001 "Error in EXE or HEX file",CR,LF 0021 U 0001 "EXE and HEX files cannot be written",CR,LF 0022 U 0000 "EXEC failure" 0023 U 0001 "(W)rite error, no destination defined",CR,LF 0024 U 0001 "Access denied",CR,LF 0025 U 0000 "Parity error or nonexistent memory error detected" 0026 U 0000 "-" 0027 U 0000 "%1 -" 0032 U 0000 "%1%2" 0033 U 0000 "%1:%2 %3" 0034 U 0000 "%1 %2" 0035 U 0000 "%1 %2",CR,LF,":" 0036 U 0000 "%1=%2 " 0037 U 0000 "%1 Error" 0038 U 0000 "Writing %2%1 bytes" ;C02 0039 U 0000 "%1:%2=" 0040 U 0000 "%1" 0041 U 0000 "%1" 0042 U 0000 "%1:%2 %3 %4 %5:%6" 0044 U 0000 32,8 0046 U 0000 "%1" 0047 U 0000 "%1" 0050 U 0000 "%1 of a total %2 EMS pages have been allocated",cr,lf 0051 U 0000 "%1 of a total %2 EMS handles have been allocated",cr,lf 0055 U 0000 "Handle created = %1 ",cr,lf 0056 U 0000 "Logical page %1 mapped to physical page %2 ",cr,lf 0057 U 0001 "EMS hardware/software failure",cr,lf 0058 U 0000 "Handle not found",cr,lf 0059 U 0000 "Invalid function code",cr,lf 0060 U 0000 "No free handles",cr,lf 0061 U 0000 "Save/Restore error",cr,lf 0062 U 0000 "Total pages exceeded",cr,lf 0063 U 0000 "Free pages exceeded",cr,lf 0064 U 0000 "Parameter error",cr,lf 0065 U 0000 "Logical Page out of range",cr,lf 0066 U 0000 "Physical Page out of range",cr,lf 0067 U 0000 "Save area already in use",cr,lf 0068 U 0000 "Save area not in use",cr,lf 0070 U 0001 "General EMS error",cr,lf 0071 U 0000 "Missing or invalid EMS parameter",cr,lf 0072 U 0000 "Handle %1 has %2 pages allocated",cr,lf 0075 U 0000 "Physical page %1 = Frame segment %2",cr,lf 0076 U 0003 "Handle %1 deallocated",cr,lf 0078 U 0000 "EMS not installed",cr,lf 0090 U 0000 "Runs Debug, a program testing and editing tool.",cr,lf,cr,lf 0091 U 0000 "DEBUG [[drive:][path]filename [testfile-parameters]]",cr,lf,cr,lf 0092 U 0000 " [drive:][path]filename Specifies the file you want to test.", cr,lf 0093 U 0000 " testfile-parameters Specifies command-line information required by",cr,lf " the file you want to test.",cr,lf,cr,lf 0094 U 0000 "After Debug starts, type ? to display a list of debugging commands.",cr,lf 0100 U 0000 "assemble A [address]",CR,LF "compare C range address",CR,LF "dump D [range]",CR,LF "enter E address [list]",CR,LF 0101 U 0000 "fill F range list",CR,LF "go G [=address] [addresses]",CR,LF "hex H value1 value2",CR,LF "input I port",CR,LF 0102 U 0000 "load L [address] [drive] [firstsector] [number]",CR,LF "move M range address",CR,LF "name N [pathname] [arglist]",CR,LF "output O port byte",CR,LF 0103 U 0000 "proceed P [=address] [number]",CR,LF "quit Q",CR,LF "register R [register]",CR,LF "search S range list",CR,LF 0104 U 0000 "trace T [=address] [value]",CR,LF "unassemble U [range]",CR,LF "write W [address] [drive] [firstsector] [number]",CR,LF 0105 U 0000 "allocate expanded memory XA [#pages]",CR,LF "deallocate expanded memory XD [handle]",CR,LF "map expanded memory pages XM [Lpage] [Ppage] [handle]",CR,LF "display expanded memory status XS",CR,LF EDLIN 00006a38 0035 0006 U 0000 "*" 0007 U 0000 "Invalid drive or file name",CR,LF 0008 U 0000 "File name must be specified",CR,LF 0010 U 0000 "File is READ-ONLY",CR,LF 0011 U 0000 "File Creation Error",CR,LF 0012 U 0000 "Too many files open",CR,LF 0013 U 0000 "Read error in:",CR,LF,"%1",CR,LF 0014 U 0000 "Cannot edit .BAK file--rename file",CR,LF 0015 U 0000 "No room in directory for file",CR,LF 0016 U 0000 "Disk full. Edits lost.",CR,LF 0017 U 0000 "File not found",CR,LF 0018 U 0000 "Entry error",CR,LF 0019 U 0000 "New file",CR,LF 0020 U 0000 "Not found",CR,LF 0021 U 0000 "O.K.? " 0022 U 0000 "Line too long",CR,LF 0023 U 0000 "End of input file",CR,LF 0024 U 0000 "Abort edit (Y/N)? " 0025 U 0000 "Must specify destination line number",CR,LF 0026 U 0000 "Not enough room to merge the entire file",CR,LF 0027 U 0000 CR,LF 0028 U 0000 LF 0029 U 0000 "Continue (Y/N)?" 0030 U 0000 "Unable to print message",CR,LF 0031 U 0000 "%1" 0032 U 0000 "%1:%2" 0033 U 0000 "Cannot merge - code page mismatch",CR,LF 0300 U 0000 "Starts Edlin, a line-oriented text editor.",CR,LF,CR,LF "EDLIN [drive:][path]filename [/B]",CR,LF,CR,LF " /B Ignores end-of-file (CTRL+Z) characters.",CR,LF 0301 U 0000 "Edit line line#",CR,LF "Append [#lines]A",CR,LF 0302 U 0000 "Copy [startline],[endline],toline[,times]C",CR,LF "Delete [startline][,endline]D",CR,LF 0303 U 0000 "End (save file) E",CR,LF "Insert [line]I",CR,LF 0304 U 0000 "List [startline][,endline]L",CR,LF "Move [startline],[endline],tolineM",CR,LF 0305 U 0000 "Page [startline][,endline]P",CR,LF "Quit (throw away changes) Q",CR,LF 0306 U 0000 "Replace [startline][,endline][?]R[oldtext][CTRL+Znewtext]",CR,LF "Search [startline][,endline][?]Stext",CR,LF 0307 U 0000 "Transfer [toline]T[drive:][path]filename",CR,LF "Write [#lines]W",CR,LF EXE2BIN 0000727c 0012 0002 U 0000 "Insufficient memory",CR,LF 0003 U 0000 "Cannot find messages",CR,LF 0004 U 0000 "Access denied",CR,LF 0005 U 0000 "File cannot be converted",CR,LF 0006 U 0000 "File not found",CR,LF 0007 U 0000 "File creation error",CR,LF 0008 U 0000 "Fix-ups needed - base segment (hex):" 0012 U 0000 "File name must be specified",CR,LF 0300 U 0000 "Converts .EXE (executable) files to binary format.",CR,LF,CR,LF 0301 U 0000 "EXE2BIN [drive1:][path1]input-file [[drive2:][path2]output-file]",CR,LF,CR,LF 0302 U 0000 " input-file Specifies the .EXE file to be converted.",CR,LF 0303 U 0000 " output-file Specifies the binary file to be created.",CR,LF GRAPHICS 0000752e 0020 0005 U 0000 "Invalid parameter: %1",CR,LF 0007 U 0000 "Duplicate parameters not allowed",CR,LF 0009 U 0000 "Cannot find GRAPHICS profile",CR,LF 0010 U 0000 "Required profile statement missing before line %1",CR,LF 0011 U 0000 "Invalid profile statement on line %1",CR,LF 0012 U 0000 "Profile statement out of sequence on line %1",CR,LF 0013 U 0000 "Error reading GRAPHICS profile",CR,LF 0014 U 0000 "Syntax errors in GRAPHICS profile",CR,LF 0015 U 0000 "Printbox ID not in GRAPHICS profile",CR,LF 0016 U 0000 "Printer type not in GRAPHICS profile",CR,LF 0017 U 0000 "/B invalid with a black and white printer",CR,LF 0018 U 0000 "Unable to reload with profile supplied",CR,LF 0300 U 0000 "Loads a program that can print graphics.",CR,LF,CR,LF 0301 U 0000 "GRAPHICS [type] [[drive:][path]filename] [/R] [/B] [/LCD]",CR,LF " [/PRINTBOX:STD | /PRINTBOX:LCD]",CR,LF,CR,LF 0302 U 0000 " type Specifies a printer type (see User's Guide and Reference).",CR,LF 0303 U 0000 " [drive:][path]filename",CR,LF " Specifies the file containing information on supported printers.",CR,LF 0304 U 0000 " /R Prints white on black as seen on the screen.",CR,LF 0305 U 0000 " /B Prints the background in color for COLOR4 and COLOR8 printers.",CR,LF 0306 U 0000 " /LCD Prints using LCD aspect ratio.",CR,LF 0307 U 0000 " /PRINTBOX:STD | /PRINTBOX:LCD",CR,LF " Specifies the print-box size, either STD or LCD.",CR,LF KEYB 00007b18 0023 0002 U 0000 "Current keyboard code: %1" 0003 U 0000 "Current keyboard ID: %1" 0004 U 0000 " code page: %1",CR,LF 0005 U 0000 "Current CON code page: %1",CR,LF 0006 U 0000 "Invalid keyboard code specified",CR,LF 0007 U 0000 "Invalid keyboard ID specified",CR,LF 0008 U 0000 "Invalid code page specified",CR,LF 0009 U 0000 "Bad or missing Keyboard Definition File",CR,LF 0010 U 0000 "KEYB has not been installed",CR,LF 0011 U 0000 "Active code page not available from CON device",CR,LF 0012 U 0000 "Code page specified has not been prepared",CR,LF 0013 U 0000 "One or more CON code pages invalid for given keyboard code",CR,LF 0014 U 0000 "Code page requested (%1) is not valid for given keyboard code",CR,LF 0015 U 0000 "Code page specified is inconsistent with the selected code page",CR,LF 0016 U 0001 "Keyboard ID specified is inconsistent with the selected keyboard layout",CR,LF 0017 U 0000 "Unable to create KEYB table in resident memory",CR,LF 0300 U 0000 "Configures a keyboard for a specific language.",CR,LF,CR,LF 0301 U 0000 "KEYB [xx[,[yyy][,[drive:][path]filename]]] [/E] [/ID:nnn]",CR,LF,CR,LF 0302 U 0000 " xx Specifies a two-letter keyboard code.",CR,LF 0303 U 0000 " yyy ÿ Specifies the code page for the character set.",CR,LF 0304 U 0000 " [drive:][path]filename Specifies the keyboard definition file.",CR,LF 0305 U 0000 " /E Specifies that an enhanced keyboard is installed.",CR,LF 0306 U 0000 " /ID:nnn Specifies the keyboard in use.",CR,LF MEM 0000814f 0066 0010 U 0000 CR,LF 0011 U 0000 " Address Name Size Type ",CR,LF 0012 U 0000 " ------- -------- ------ ------",CR,LF 0013 U 0000 " Handle EMS Name Size ",CR,LF 0014 U 0000 " ------- -------- ------ ",CR,LF 0015 U 0000 " %1 %2 %3 %4",CR,LF 0016 U 0000 " %1 %2 %3 ",CR,LF 0017 U 0000 " %1 %2 ",CR,LF 0018 U 0000 "%1 bytes total conventional memory",CR,LF 0019 U 0000 "%1 bytes available to MS-DOS",CR,LF 0020 U 0000 "%1 largest executable program size",CR,LF 0021 U 0000 "%1 bytes total EMS memory",CR,LF 0022 U 0000 "%1 bytes free EMS memory",CR,LF 0023 U 0000 "%1 bytes total contiguous extended memory",CR,LF 0024 U 0000 "Interrupt Vector",0 0025 U 0000 "ROM Communication Area",0 0026 U 0000 "DOS Communication Area",0 0027 U 0000 "IO",0 0028 U 0000 "MSDOS",0 0029 U 0000 "System Data",0 0030 U 0000 "System Program",0 0031 U 0000 "System Device Driver",0 0032 U 0000 "Installed Device Driver",0 0033 U 0000 "%1:",0 0034 U 0000 "%1: - %2:",0 0035 U 0000 "BUFFERS=",0 0036 U 0000 "FILES=",0 0037 U 0000 "FCBS=",0 0038 U 0000 "STACKS=",0 0039 U 0000 "DEVICE=",0 0040 U 0000 "IFS=",0 0041 U 0000 "LASTDRIVE=",0 0042 U 0000 "----------",0 0043 U 0000 " ",0 0044 U 0000 " %1 %2 %3",CR,LF 0045 U 0001 "INSTALL=",0 0046 U 0001 "%1 bytes available contiguous extended memory",CR,LF 0047 U 0000 "System Stacks",0 0048 U 0000 "-- Free --",0 0049 U 0000 "Program",0 0050 U 0000 "Environment",0 0051 U 0000 "Data",0 0052 N 0000 "%1 bytes available XMS memory",CR,LF 0053 N 0000 " 64Kb High Memory Area available",CR,LF 0054 N 0000 " High Memory Area in use",CR,LF 0055 N 0000 " MS-DOS resident in High Memory Area",CR,LF 0056 U 0000 "IBMBIO",0 ;*EGH 0057 U 0000 "IBMDOS",0 ;*EGH 0058 N 0000 " MS-DOS resident in ROM using High Memory Area",CR,LF 0059 U 0000 "Conventional Memory :",CR,LF 0060 U 0000 "Upper Memory :",CR,LF 0061 U 0000 "Total FREE : %1 %2 ",CR,LF 0062 U 0000 "FREE",0 0063 U 0000 " Name Size in Decimal Size in Hex",CR,LF 0064 U 0000 "------------- --------------------- -------------",CR,LF 0065 U 0000 "Total bytes available to programs (Conventional+Upper) : %1 %2",CR,LF 0066 U 0000 "Largest executable program size : %1 %2",CR,LF 0067 U 0000 "Largest available upper memory block : %1 %2",CR,LF 0068 U 0000 "Too much of memory fragmentation; MEM /C cannot be done",CR,LF 0069 U 0000 "SYSTEM",0 0070 U 0000 "Total bytes available to programs : %1 %2",CR,LF 0300 U 0000 "Displays the amount of used and free memory in your system.",CR,LF,CR,LF 0301 U 0000 "MEM [/PROGRAM | /DEBUG | /CLASSIFY]",CR,LF,CR,LF 0302 U 0000 " /PROGRAM or /P Displays status of programs currently loaded in memory.",CR,LF 0303 U 0000 " /DEBUG or /D Displays status of programs, internal drivers, and other",CR,LF " information.",CR,LF 0304 U 0000 " /CLASSIFY or /C Classifies programs by memory usage. Lists the size of",CR,LF " programs, provides a summary of memory in use, and lists",CR,LF " largest memory block available.",CR,LF MSBIO 00008f0b 0023 0003 U 0000 13,10,"Unrecognized command in CONFIG.SYS" 0004 U 0000 13,10,"$" 0005 U 0000 13,10,"Sector size too large in file $" 0006 U 0000 13,10,"Bad or missing $" 0007 U 0000 "Command Interpreter",0 0008 U 0000 13,10,"Invalid country code or code page",13,10,"$" 0009 U 0000 13,10,"Error in COUNTRY command",13,10,"$" 0010 U 0000 13,10, "Insufficient memory for COUNTRY.SYS file",13,10,"$" 0011 U 0000 13,10,"Configuration too large for memory",13,10,"$" 0012 U 0000 13,10,"Too many block devices",13,10,"$" 0013 U 0000 13,10,"Invalid STACK parameters",13,10,"$" 0014 U 0000 13,10,"Incorrect order in CONFIG.SYS line ","$" 0015 U 0000 "Error in CONFIG.SYS line ","$" 0016 U 0000 13,10,"Memory allocation error ","$" 0017 U 0001 0DH,0AH,7,0DH,0AH, "Internal stack overflow",0DH,0AH "System halted",0DH,0AH,"$" 0018 U 0000 "HMA not available : Loading DOS low",13,10,"$" 0019 U 0000 13,10,"failed to boot - missing local driver $" 0020 U 0000 13,10,"Insert diskette for drive " 0021 U 0000 "A: and press any key when ready",13,10,10,0 0022 U 0000 13,10,"Bad command or parameters - $" 0023 U 0000 "Fatal Error:Cannot allocate Memory for DOS", 13, 10, "$" 0024 U 0000 "WARNING! Logical drives past Z: exist and will be ignored",13,10,"$" 0025 U 0000 "This version of DOS will boot only on IBM machines",13,10,0 MSDOS 0000945b 0007 0001 U 0001 13,10,"Divide overflow",13,10 0002 U 0002 "y" 0003 U 0002 "n" 0004 U 0003 13,10,"A20 Hardware Error",13,10,"$" 0005 U 0000 "Y" 0006 U 0000 "N" 0007 U 0000 "You must have the file WINA20.386 in the root of your boot drive",13,10 "to run Windows in Enhanced Mode",13,10 NLSFUNC 00009594 0003 0300 U 0000 "Loads country-specific information.",CR,LF,CR,LF 0301 U 0000 "NLSFUNC [[drive:][path]filename]",CR,LF,CR,LF 0302 U 0000 " [drive:][path]filename Specifies the file containing country-specific",CR,LF " information.",CR,LF SHARE 000096b8 0005 0003 U 0000 "SHARE cannot be installed under DOSSHELL.",CR,LF 0300 U 0000 "Installs file-sharing and locking capabilities on your hard disk.",CR,LF,CR,LF 0301 U 0000 "SHARE [/F:space] [/L:locks]",CR,LF,CR,LF 0302 U 0000 " /F:space Allocates file space (in bytes) for file-sharing information.",CR,LF 0303 U 0000 " /L:locks Sets the number of files that can be locked at one time.",CR,LF