TITLE STRINGS - OEM dependent strings used by KERNEL
include gpcont.inc ; SHERLOCK
_DATA SEGMENT PARA PUBLIC 'DATA'
_DATA ENDS
DGROUP GROUP _DATA
_INITTEXT SEGMENT WORD PUBLIC 'CODE'
_INITTEXT ENDS
_NRESTEXT SEGMENT WORD PUBLIC 'CODE'
_NRESTEXT ENDS
ASSUME DS:DGROUP
_DATA SEGMENT PARA PUBLIC 'DATA'
; This is the caption string for the dialog box.
public szDiskCap
IF 0
szDiskCap db 'Change Disk',0
ELSE
szDiskCap db 'File Error',0
ENDIF
; This is the text for the "Cannot find xxxxxx" dialog box.
; It is printed:
;
; <szCannotFind1>filename<szCannotFind2>
public szCannotFind1,szCannotFind2
szCannotFind1 db "Cannot find ", 0
szCannotFind2 db 0
; This is the text for fatal errors at boot time
; <szBootLoad>filename
public szBootLoad
szBootLoad db "Error loading ",0
; The following group of strings is used for the "Please insert disk with XXXX
; in drive X:" dialog box.
;
; These two strings form the dialog message it is:
;
; <szCannotFind1>filename<szInsert>
IF 0
public szInsert
szInsert db ', Please insert in drive '
ENDIF
;public drvlet
;drvlet db "X.",0
if SHERLOCK
public szGPCont ; GP fault continuation message
szGPCont db "An error has occurred in your application.",10
db "If you choose Ignore, you should save your work in a new file.",10
db "If you choose Close, your application will terminate.",0
endif
public szDosVer
szDosVer DB 'Incorrect MS-DOS version. MS-DOS 3.1 or greater required.',13,10,'$'
; Text for exceptions and faults lead to app termination.
public szAbortCaption,szInModule,szAt
public szNukeApp,szSnoozer,szGP,szSF,szII,szPF,szNP,szBlame,szLoad,szWillClose
public szOutofSelectors
szAbortCaption db "Application Error"
db 0
szBlame db "BOOT "
db 0
szSnoozer db " caused "
db 0
szInModule db " in", 10, "module <unknown>"
db 0
szAt db " at "
db 0
szNukeApp db ".", 10, 10, "Choose close. "
db 0
szWillClose db " will close."
db 0
szGP db "a General Protection Fault"
db 0
szD0 db "a Divide by Zero" ; not yet used
db 0
szSF db "a Stack Fault" ; not spec'ed
db 0
szII db "an Illegal Instruction" ; "Fault" ???
db 0
szPF db "a Page Fault"
db 0
szNP db "a Not Present Fault"
db 0
szAF db "an Application Fault" ; not yet used
db 0
szLoad db "Segment Load Failure"
db 0
szOutofSelectors db "Out of Selectors"
db 0
; Text for dialog box when terminating an application
public szAbort
szAbort db "Closing current application.",0
; Text for dialog box when trying to run a compressed file
public szBozo
szBozo db "Cannot load compressed files",0
; This is the caption string for system error dialog boxes
public syserr
syserr db "System Error",0
; The following group of messages forms all of the messages used
; in the INT 24 dialog box.
;
; There are 7 messages which can be translated individually. The
; location of drvlet? and devenam? can be moved to any location
; within the string.
public msgWriteProtect,drvlet1
public msgCannotReadDrv,drvlet2
public msgCannotWriteDrv,drvlet3
public msgShare,drvlet4
public msgNetError,drvlet5
public msgCannotReadDev,devenam1
public msgCannotWriteDev,devenam2
public msgNoPrinter
public msgNetErrorDev,devenam3
msgWriteProtect db "Write-protected disk in drive "
drvlet1 db "X.",0
msgCannotReadDrv db "Cannot read from drive "
drvlet2 db "X.",0
msgCannotWriteDrv db "Cannot write to drive "
drvlet3 db "X.",0
msgShare db "Sharing violation on drive "
drvlet4 db "X.",0
msgNetError db "Network error on drive "
drvlet5 db "X.",0
msgCannotReadDev db "Cannot read from device "
devenam1 db 8 dup (?)
db 0
msgCannotWriteDev db "Cannot write to device "
devenam2 db 8 dup (?)
db 0
msgNetErrorDev db "Network error on device "
devenam3 db 8 dup (?)
db 0
msgNoPrinter db "Printer not ready",0
ifndef WINDEBUG
public szExitStr1,szExitStr2
szExitStr1 DB 7,13,10,'FatalExit code = ',0
szExitStr2 DB ' stack overflow',13,10,0
public szUndefDyn
szUndefDyn db "Call to Undefined Dynalink",0
public szFatalExit
szFatalExit db "Application requested abnormal termination",0
else
public szDebugStr
szDebugStr DB 'KERNEL: Failed loading - ',0 ; 0
DB 'KERNEL: Failed loading new instance of - ',0 ; 1
DB 'Error loading from resource file - ',0 ; 2
DB 13,10,0 ; 3
DB 7,13,10,'FatalExit code = ',0 ; 4
DB ' stack overflow',0 ; 5
DB 13,10,'Stack trace:',13,10,0 ; 6
DB 7,13,10,'Abort, Break, Exit or Ignore? ',0 ; 7
DB 'Invalid BP chain',7,13,10,0 ; 8
DB ': ',0 ; 9
DB 'Reentered FatalExit',7,13,10,0 ; 10
DB 0
public szFKE
szFKE DB '*** Fatal Kernel Error ***',0
endif
;** Diagnostic mode messages
public szDiagStart, szCRLF, szLoadStart, szLoadSuccess, szLoadFail
public szFailCode, szCodeString
szDiagStart db '[boot]' ;lpCRLF must follow
szCRLF db 0dh, 0ah, 0
szLoadStart db 'LoadStart = ',0
szLoadSuccess db 'LoadSuccess = ', 0
szLoadFail db 'LoadFail = ', 0
szFailCode db ' Failure code is ' ;szCodeString must follow
szCodeString db '00', 0dh, 0ah, 0
ifdef WINDEBUG
public szInitSpew
szInitSpew DB 'Diagnostic mode startup. Log file is: ', 0
endif
_DATA ENDS
_INITTEXT SEGMENT WORD PUBLIC 'CODE'
public szInadequate, szNoPMode, szNoGlobalInit
public NoOpenFile, NoLoadHeader, szMissingMod, szPleaseDoIt
ifdef WOW
public szGenBootFail
szNoPMode db "The Win16 Subsystem was unable to enter Protected Mode, DOSX.EXE must be in your AUTOEXEC.NT and present in your PATH.",0
szMissingMod db "NTVDM KERNEL: Missing 16-bit system module",0
szPleaseDoIt db "Please re-install the following module to your system32 directory:",13,10,9,9,0
szInadequate db "NTVDM KERNEL: Inadequate DPMI Server",0
szNoGlobalInit db "NTVDM KERNEL: Unable to initialize heap",0
NoOpenFile db "NTVDM KERNEL: Unable to open KERNEL executable",0
NoLoadHeader db "NTVDM KERNEL: Unable to load KERNEL EXE header",0
szGenBootFail db "NTVDM KERNEL: Win16 Subsystem Initialization Failure",0
else
szInadequate db 'KERNEL: Inadequate DPMI Server',13,10,'$'
szNoPMode db 'KERNEL: Unable to enter Protected Mode',13,10,'$'
szNoGlobalInit db "KERNEL: Unable to initialize heap",13,10,'$'
NoOpenFile db "KERNEL: Unable to open KERNEL executable"
db 13, 10, '$'
NoLoadHeader db "KERNEL: Unable to load KERNEL EXE header"
db 13, 10, '$'
endif
_INITTEXT ENDS
_NRESTEXT SEGMENT WORD PUBLIC 'CODE'
; This is the caption string for the protect mode dialog box.
;
; DO NOT CHANGE THE LENGTH OF THIS MESSAGE
;
public szProtectCap,msgRealModeApp1,msgRealModeApp2
szProtectCap db "Application Compatibility Warning",0
msgRealModeApp1 db "The application you are about to run, ",0
msgRealModeApp2 db ", was designed for a previous version of Windows.",0Dh,0Dh
db "Obtain an updated version of the application that is compatible "
db "with Windows version 3.0 and later.",13,13
db "If you choose the OK button and start the application, compatibility "
db "problems could cause the application or Windows to close unexpectedly.",0
_NRESTEXT ENDS
end