*PPD-Adobe: "4.0" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1993 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *%Copyright 1994 Digital Equipment Corporation. *FormatVersion: "4.0" *FileVersion: "1.2" *PCFileName: "DCKPS401.PPD" *LanguageVersion: English *Product: "(PrintServer 40)" *PSVersion: "(48.3) 10" *ModelName: "Digital PrintServer 40 Plus/Japanese" *ShortNickName: "Digital PrintServer 40 Plus/J" *NickName: "Digital PrintServer 40 Plus/Japanese v48.3" *% === Basic Capabilities =============== *FreeVM: "760720" *LanguageLevel: "1" *Extensions: Composite *ColorDevice: False *DefaultColorSpace: Gray *VariablePaperSize: False *FileSystem: False *Throughput: "40" *% For MS Windows: Do not put ^D in files *EndOfFile: False *Password: "(LPS40)" *ExitServer: " count 0 eq { true }{ dup statusdict /checkpassword get exec not } ifelse { (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec" *End *DefaultResolution: 300dpi *?Resolution: " save initgraphics matrix defaultmatrix dup 0 get dup mul exch 1 get dup mul add sqrt 72 mul round cvi ( ) cvs print (dpi) = flush restore" *End *% === DECimage (Smoothing) ============ *OpenUI *Smoothing/DECimage: Boolean *OrderDependency: 50 AnySetup *Smoothing *DefaultSmoothing: Off *Smoothing Off: "false statusdict /setDECimage get exec" *Smoothing On: "true statusdict /setDECimage get exec" *?Smoothing: " save statusdict /DECimage get exec {(On)}{(Off)} ifelse = flush restore" *End *CloseUI: *Smoothing *% === DECimageparams (bits per pixel) ============ *OpenUI *BitsPerPixel/DECimage controls: PickOne *OrderDependency: 50 AnySetup *BitsPerPixel *DefaultBitsPerPixel: Off *BitsPerPixel Off/Standard: "0.0 1.0 0.0 1 statusdict /setDECimageparams get exec" *BitsPerPixel 1/High Contrast: "0.2 0.8 0.0 1 statusdict /setDECimageparams get exec" *BitsPerPixel 2/Low Contrast: "-0.4 1.5 0.0 1 statusdict /setDECimageparams get exec" *BitsPerPixel 4/Sharp: "0.0 1.0 2.0 1 statusdict /setDECimageparams get exec" *BitsPerPixel 8/Soft: "0.0 1.0 -1.0 1 statusdict /setDECimageparams get exec" *CloseUI: *BitsPerPixel *% Halftone Information =============== *AccurateScreensSupport: False *ScreenFreq: "60.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub } {dup mul exch dup mul add 1 exch sub }ifelse }" *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Factory *Transfer Factory: "{dup 0.5 lt {0.225 mul 0.5 div }{1.55 mul 0.55 sub }ifelse }" *Transfer Factory.Inverse: "{ 1 exch sub dup 0.5 lt {0.225 mul 0.5 div }{1.55 mul 0.55 sub }ifelse }" *Transfer Null: "{ }" *Transfer Null.Inverse: "{ 1 exch sub }" *% Paper Handling =================== *% Use these entries to set paper size most of the time, unless there is *% specific reason to use PageRegion. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter: "statusdict /lettertray get exec" *PageSize Legal: "statusdict /legaltray get exec" *PageSize Tabloid: "statusdict /11x17tray get exec" *PageSize Executive: "statusdict /executivetray get exec" *PageSize A3: "statusdict /a3tray get exec" *PageSize A4: "statusdict /a4tray get exec" *PageSize A5: "statusdict /a5tray get exec" *PageSize B4: "statusdict /b4tray get exec" *PageSize B5: "statusdict /b5tray get exec" *?PageSize: " save 9 dict dup /lettertray (Letter) put dup /legaltray (Legal) put dup /11x17tray (Tabloid) put dup /executivetray (Executive) put dup /a3tray (A3) put dup /a4tray (A4) put dup /a5tray (A5) put dup /b4tray (B4) put dup /b5tray (B5) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore" *End *CloseUI: *PageSize *% These entries will set up the frame buffer. Usually used with manual feed. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: "" *PageRegion Legal: "" *PageRegion Tabloid: "" *PageRegion Executive: "" *PageRegion A3: "" *PageRegion A4: "" *PageRegion A5: "" *PageRegion B4: "" *PageRegion B5: "" *CloseUI: *PageRegion *% The following entries provide information about specific paper keywords. *DefaultImageableArea: Letter *ImageableArea Letter: "6.48 8.16 605.28 783.6 " *ImageableArea Legal: "6.48 8.88 605.28 999.36 " *ImageableArea Tabloid: "8.16 9.36 783.6 1214.88 " *ImageableArea Executive: "9.36 8.16 508.32 745.2 " *ImageableArea A3: "5.76 6.36 834.96 1181.16 " *ImageableArea A4: "5.76 6.36 589.2 832.32 " *ImageableArea A5: "6.24 6.0 413.04 589.44 " *ImageableArea B4: "7.08 9.24 721.08 1022.76 " *ImageableArea B5: "8.28 7.32 507.24 721.08 " *?ImageableArea: " save /cvp { ( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore" *End *% These provide the physical dimensions of the paper (by keyword) *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension Tabloid: "792 1224" *PaperDimension Executive: "522 756" *PaperDimension A3: "842 1191" *PaperDimension A4: "595 842" *PaperDimension A5: "419 595" *PaperDimension B4: "729 1032" *PaperDimension B5: "516 729" *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: LargeCapacity *InputSlot Upper: "1 statusdict /setpapertray get exec" *InputSlot Middle: "2 statusdict /setpapertray get exec" *InputSlot LargeCapacity: "3 statusdict /setpapertray get exec" *?InputSlot: " save [ (Upper) (Middle) (LargeCapacity) ] statusdict /papertray {get exec} stopped { pop pop (Unknown) } if = flush restore" *End *CloseUI: *InputSlot *OpenUI *OutputBin: PickOne *OrderDependency: 40 AnySetup *OutputBin *DefaultOutputBin: Upper *OutputBin Side: "1 statusdict /setoutputtray get exec" *OutputBin Faceup: "2 statusdict /setoutputtray get exec" *OutputBin Upper: "3 statusdict /setoutputtray get exec" *?OutputBin: " save mark [ (Side) (Faceup) (Upper) ] statusdict /outputtray {get exec 1 sub get exch pop} stopped { cleartomark (Unknown) } if = flush restore" *End *CloseUI: *OutputBin *PageStackOrder Side: Normal *PageStackOrder Faceup: Reverse *PageStackOrder Upper: Normal *% Font Information ===================== *%DefaultFont: Error *% for WindowsNT font mapping. *DefaultFont: Ryumin-Light-RKSJ-H *Font AvantGarde-Book: Standard "(001.001)" Standard *Font AvantGarde-BookOblique: Standard "(001.001)" Standard *Font AvantGarde-Demi: Standard "(001.001)" Standard *Font AvantGarde-DemiOblique: Standard "(001.001)" Standard *Font Courier: Standard "(001.004)" Standard *Font Courier-Bold: Standard "(001.004)" Standard *Font Courier-BoldOblique: Standard "(001.004)" Standard *Font Courier-Oblique: Standard "(001.004)" Standard *Font GothicBBB-Medium-78-EUC-H: EUC "(000.000)" JIS-83 *Font GothicBBB-Medium-78-EUC-V: EUC "(000.000)" JIS-83 *Font GothicBBB-Medium-78-H: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-78-RKSJ-H: RKSJ "(000.000)" JIS-83 *Font GothicBBB-Medium-78-RKSJ-V: RKSJ "(000.000)" JIS-83 *Font GothicBBB-Medium-78-SJ-H: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-78-SJ-V: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-78-V: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-83pv-RKSJ-H: RKSJ "(000.000)" 83pv *Font GothicBBB-Medium-EUC-H: EUC "(000.000)" JIS-83 *Font GothicBBB-Medium-EUC-V: EUC "(000.000)" JIS-83 *Font GothicBBB-Medium-Ext-EUC-H: EUC "(000.000)" JIS-83 *Font GothicBBB-Medium-Ext-EUC-V: EUC "(000.000)" JIS-83 *Font GothicBBB-Medium-Ext-H: JIS "(000.000)" Ext *Font GothicBBB-Medium-Ext-RKSJ-H: RKSJ "(000.000)" Ext *Font GothicBBB-Medium-Ext-RKSJ-V: RKSJ "(000.000)" Ext *Font GothicBBB-Medium-Ext-SJ-H: JIS "(000.000)" Ext *Font GothicBBB-Medium-Ext-SJ-V: JIS "(000.000)" Ext *Font GothicBBB-Medium-Ext-V: JIS "(000.000)" Ext *Font GothicBBB-Medium-H: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-NWP-H: JIS "(000.000)" NWP *Font GothicBBB-Medium-NWP-V: JIS "(000.000)" NWP *Font GothicBBB-Medium-RKSJ-H: RKSJ "(000.000)" JIS-83 *Font GothicBBB-Medium-RKSJ-V: RKSJ "(000.000)" JIS-83 *Font GothicBBB-Medium-SJ-H: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-SJ-V: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium-V: JIS "(000.000)" JIS-83 *Font GothicBBB-Medium.Hankaku: Special "(000.000)" Special *Font GothicBBB-Medium.Hiragana: Special "(000.000)" Special *Font GothicBBB-Medium.Katakana: Special "(000.000)" Special *Font GothicBBB-Medium.Roman: Special "(000.000)" Special *Font GothicBBB-Medium.WP-Symbol: Special "(000.000)" Special *Font Helvetica: Standard "(001.001)" Standard *Font Helvetica-Bold: Standard "(001.001)" Standard *Font Helvetica-BoldOblique: Standard "(001.001)" Standard *Font Helvetica-Oblique: Standard "(001.001)" Standard *Font LubalinGraph-Book: Standard "(001.001)" Standard *Font LubalinGraph-BookOblique: Standard "(001.001)" Standard *Font LubalinGraph-Demi: Standard "(001.001)" Standard *Font LubalinGraph-DemiOblique: Standard "(001.001)" Standard *Font Mincho-PC-Hiragana: Special "(000.000)" Special *Font Mincho-PC-Katakana: Special "(000.000)" Special *Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard *Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard *Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard *Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard *Font PCHelvetica: Special "(001.001)" Special *Font PCTimes-Roman: Special "(001.001)" Special *Font Ryumin-Light-78-EUC-H: EUC "(000.000)" JIS-83 *Font Ryumin-Light-78-EUC-V: EUC "(000.000)" JIS-83 *Font Ryumin-Light-78-H: JIS "(000.000)" JIS-83 *Font Ryumin-Light-78-RKSJ-H: RKSJ "(000.000)" JIS-83 *Font Ryumin-Light-78-RKSJ-V: RKSJ "(000.000)" JIS-83 *Font Ryumin-Light-78-SJ-H: JIS "(000.000)" JIS-83 *Font Ryumin-Light-78-SJ-V: JIS "(000.000)" JIS-83 *Font Ryumin-Light-78-V: JIS "(000.000)" JIS-83 *Font Ryumin-Light-83pv-RKSJ-H: RKSJ "(000.000)" 83pv *Font Ryumin-Light-EUC-H: EUC "(000.000)" JIS-83 *Font Ryumin-Light-EUC-V: EUC "(000.000)" JIS-83 *Font Ryumin-Light-Ext-EUC-H: EUC "(000.000)" JIS-83 *Font Ryumin-Light-Ext-EUC-V: EUC "(000.000)" JIS-83 *Font Ryumin-Light-Ext-H: JIS "(000.000)" Ext *Font Ryumin-Light-Ext-RKSJ-H: RKSJ "(000.000)" Ext *Font Ryumin-Light-Ext-RKSJ-V: RKSJ "(000.000)" Ext *Font Ryumin-Light-Ext-SJ-H: JIS "(000.000)" Ext *Font Ryumin-Light-Ext-SJ-V: JIS "(000.000)" Ext *Font Ryumin-Light-Ext-V: JIS "(000.000)" Ext *Font Ryumin-Light-H: JIS "(000.000)" JIS-83 *Font Ryumin-Light-NWP-H: JIS "(000.000)" NWP *Font Ryumin-Light-NWP-V: JIS "(000.000)" NWP *Font Ryumin-Light-RKSJ-H: RKSJ "(000.000)" JIS-83 *Font Ryumin-Light-RKSJ-V: RKSJ "(000.000)" JIS-83 *Font Ryumin-Light-SJ-H: JIS "(000.000)" JIS-83 *Font Ryumin-Light-SJ-V: JIS "(000.000)" JIS-83 *Font Ryumin-Light-V: JIS "(000.000)" JIS-83 *Font Ryumin-Light.Hankaku: Special "(000.000)" Special *Font Ryumin-Light.Hiragana: Special "(000.000)" Special *Font Ryumin-Light.Katakana: Special "(000.000)" Special *Font Ryumin-Light.Roman: Special "(000.000)" Special *Font Ryumin-Light.WP-Symbol: Special "(000.000)" Special *Font Souvenir-Demi: Standard "(001.001)" Standard *Font Souvenir-DemiItalic: Standard "(001.001)" Standard *Font Souvenir-Light: Standard "(001.001)" Standard *Font Souvenir-LightItalic: Standard "(001.001)" Standard *Font Symbol: Special "(001.001)" Special *Font Times-Bold: Standard "(001.001)" Standard *Font Times-BoldItalic: Standard "(001.001)" Standard *Font Times-Italic: Standard "(001.001)" Standard *Font Times-Roman: Standard "(001.001)" Standard *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = } {exit} ifelse }bind loop (*) = flush restore" *End *?FontList: "save FontDirectory { pop == } bind forall flush (*) = flush restore" *% Printer Messages (verbatim from printer): *Message: "A new input or output tray has been selected" *Message: "Document has been printed" *Message: "Job \jobname\ Aborted by Server Management" *Message: "Job \jobname\ Aborted" *Message: "Job \jobname\ Connect" *Message: "Job \jobname\ Finish" *Message: "Job \jobname\ Start" *Message: "Job aborted - Printer is still paused" *Message: "Job acceptance is disabled - job rejected" *Message: "Pending Job \jobname\ Aborted" *Message: "PostScript quit operator has been executed" *Message: "Print Engine error has been corrected" *Message: "Print Engine has gone online" *Message: "Print Engine ready" *Message: "Problem Unknown" *Message: "String is too long - it has been truncated" *Message: "Switching to alternate paper source" *Message: "Timeout trying to send a message" *Message: "exitserver has been executed - permanent state may be changed" *% PrinterErrors *PrinterError: "Add toner and Clean components" *PrinterError: "Call Field Service to correct error" *PrinterError: "Charge wire cleaning completed" *PrinterError: "Charge wire cleaning in progress" *PrinterError: "Check: toner cartridge installation" *PrinterError: "Cleaning unit absent or improperly seated" *PrinterError: "Cleaning unit full - needs replacement" *PrinterError: "Communication with print engine lost -- reboot PrintServer" *PrinterError: "Developer unit absent or improperly seated" *PrinterError: "Engine command buffer overflow -- reboot PrintServer" *PrinterError: "Field Service maintenance required- Call Field Service" *PrinterError: "Fuser unit absent or improperly seated" *PrinterError: "General user maintenance, perform: \maintenance\" *PrinterError: "Image density adjustment required" *PrinterError: "Incorrect media in LCIT" *PrinterError: "Incorrect media in lower paper tray" *PrinterError: "Incorrect media in upper paper tray" *PrinterError: "Lower paper tray is missing or misaligned" *PrinterError: "OPC drum absent or improperly seated" *PrinterError: "OPC drum needs replacement" *PrinterError: "Paper Jam - Clear top output tray" *PrinterError: "Paper Jam - Open side door to clear paper path" *PrinterError: "Paper output cover is open" *PrinterError: "Perform user maintenance" *PrinterError: "Please clear paper jam caused by fatal engine error" *PrinterError: "Please clear paper jam caused by fusing unit" *PrinterError: "Please clear paper jam caused by lower transport station" *PrinterError: "Please clear paper jam caused by main transport station" *PrinterError: "Please clear paper jam caused by opened cover" *PrinterError: "Please clear paper jam caused by upper transport station" *PrinterError: "Please reboot the PrintServer - FATAL ERROR" *PrinterError: "Print Engine 100,000 page maintenance required" *PrinterError: "Print Engine 200,000 page maintenance required" *PrinterError: "Print Engine 50,000 page maintenance required" *PrinterError: "Print Engine cover is open" *PrinterError: "Print Engine developer needs replacement" *PrinterError: "Print Engine driving unit error" *PrinterError: "Print Engine drum needs replacement" *PrinterError: "Print Engine fusing error" *PrinterError: "Print Engine fusing unit setting is incorrect" *PrinterError: "Print Engine hardware error: \code\" *PrinterError: "Print Engine has gone off line" *PrinterError: "Print Engine is in warmup state" *PrinterError: "Print Engine is not ready" *PrinterError: "Print Engine large capacity paper tray is empty" *PrinterError: "Print Engine large capacity paper tray is jammed" *PrinterError: "Print Engine lower paper tray is empty" *PrinterError: "Print Engine lower paper tray is jammed" *PrinterError: "Print Engine oil supply low" *PrinterError: "Print Engine optical unit error" *PrinterError: "Print Engine paper eject section is jammed" *PrinterError: "Print Engine paper feed unit error" *PrinterError: "Print Engine power supply unit error" *PrinterError: "Print Engine toner cartridge setting is incorrect" *PrinterError: "Print Engine toner supply is exhausted" *PrinterError: "Print Engine toner supply low" *PrinterError: "Print Engine transport path setting is incorrect" *PrinterError: "Print Engine transport section is jammed" *PrinterError: "Print Engine unknown error status: \code1\, \code2\" *PrinterError: "Print Engine upper paper tray is empty" *PrinterError: "Print Engine upper paper tray is jammed" *PrinterError: "Print engine side cover is open" *PrinterError: "Printer requires service: code = \service1\ \service2\" *PrinterError: "Replace OPC drum" *PrinterError: "Side output tray full" *PrinterError: "Side tray not correctly positioned" *PrinterError: "Toner low or not distibuted properly replace: toner" *PrinterError: "Unavailable paper destination selected" *PrinterError: "Upper door access paper jam, open top cover" *PrinterError: "Upper output tray full" *PrinterError: "Upper paper tray is missing or misaligned" *PrinterError: "Upper unit cover open, close top cover" *% Status Messages: copy of PrinterErrors *Status: "Add toner and Clean components" *Status: "Call Field Service to correct error" *Status: "Charge wire cleaning completed" *Status: "Charge wire cleaning in progress" *Status: "Check: toner cartridge installation" *Status: "Cleaning unit absent or improperly seated" *Status: "Cleaning unit full - needs replacement" *Status: "Communication with print engine lost -- reboot PrintServer" *Status: "Developer unit absent or improperly seated" *Status: "Engine command buffer overflow -- reboot PrintServer" *Status: "Field Service maintenance required- Call Field Service" *Status: "Fuser unit absent or improperly seated" *Status: "General user maintenance, perform: \maintenance\" *Status: "Image density adjustment required" *Status: "Incorrect media in LCIT" *Status: "Incorrect media in lower paper tray" *Status: "Incorrect media in upper paper tray" *Status: "Lower paper tray is missing or misaligned" *Status: "OPC drum absent or improperly seated" *Status: "OPC drum needs replacement" *Status: "Paper Jam - Clear top output tray" *Status: "Paper Jam - Open side door to clear paper path" *Status: "Paper output cover is open" *Status: "Perform user maintenance" *Status: "Please clear paper jam caused by fatal engine error" *Status: "Please clear paper jam caused by fusing unit" *Status: "Please clear paper jam caused by lower transport station" *Status: "Please clear paper jam caused by main transport station" *Status: "Please clear paper jam caused by opened cover" *Status: "Please clear paper jam caused by upper transport station" *Status: "Please reboot the PrintServer - FATAL ERROR" *Status: "Print Engine 100,000 page maintenance required" *Status: "Print Engine 200,000 page maintenance required" *Status: "Print Engine 50,000 page maintenance required" *Status: "Print Engine cover is open" *Status: "Print Engine developer needs replacement" *Status: "Print Engine driving unit error" *Status: "Print Engine drum needs replacement" *Status: "Print Engine fusing error" *Status: "Print Engine fusing unit setting is incorrect" *Status: "Print Engine hardware error: \code\" *Status: "Print Engine has gone off line" *Status: "Print Engine is in warmup state" *Status: "Print Engine is not ready" *Status: "Print Engine large capacity paper tray is empty" *Status: "Print Engine large capacity paper tray is jammed" *Status: "Print Engine lower paper tray is empty" *Status: "Print Engine lower paper tray is jammed" *Status: "Print Engine oil supply low" *Status: "Print Engine optical unit error" *Status: "Print Engine paper eject section is jammed" *Status: "Print Engine paper feed unit error" *Status: "Print Engine power supply unit error" *Status: "Print Engine toner cartridge setting is incorrect" *Status: "Print Engine toner supply is exhausted" *Status: "Print Engine toner supply low" *Status: "Print Engine transport path setting is incorrect" *Status: "Print Engine transport section is jammed" *Status: "Print Engine unknown error status: \code1\, \code2\" *Status: "Print Engine upper paper tray is empty" *Status: "Print Engine upper paper tray is jammed" *Status: "Print engine side cover is open" *Status: "Printer requires service: code = \service1\ \service2\" *Status: "Replace OPC drum" *Status: "Side output tray full" *Status: "Side tray not correctly positioned" *Status: "Toner low or not distibuted properly replace: toner" *Status: "Unavailable paper destination selected" *Status: "Upper door access paper jam, open top cover" *Status: "Upper output tray full" *Status: "Upper paper tray is missing or misaligned" *Status: "Upper unit cover open, close top cover" *% Other status messages *Status: "Active" *Status: "Idle" *Status: "PrintServer is currently disabled and cannot accept jobs" *Status: "Printer is paused (job is pending)" *Status: "Printer is resuming" *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% For "PrintServer 40 Plus" version 48.3 *% Produced by "bldppd4.0L1.ps" *% Last Edit Date: Oct 25 1994 *% The byte count of this file should be exactly 023836 or 024399 *% depending on the filesystem it resides in. *% end of PPD file for PrintServer 40 Plus