*PPD-Adobe: "4.0" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1993 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *%Copyright 1993 Digital Equipment Corporation. *FormatVersion: "4.0" *FileVersion: "1.0" *LanguageVersion: English *PCFileName: "DCLN03R1.PPD" *Product: "(ScriptPrinter)" *PSVersion: "(47.2) 1" *ModelName: "Digital ScriptPrinter" *NickName: "Digital LN03R ScriptPrinter" *% === Basic Capabilities =============== *LanguageLevel: "1" *FreeVM: "408148" *ColorDevice: False *DefaultColorSpace: Gray *VariablePaperSize: False *FileSystem: False *Throughput: "8" *Password: "(LN03R)" *ExitServer: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *DefaultResolution: 300dpi *?Resolution: " save initgraphics matrix defaultmatrix dup 0 get dup mul exch 1 get dup mul add sqrt 72 mul round cvi ( ) cvs print (dpi) = flush restore " *End *% Halftone Information =============== *ScreenFreq: "60.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Null *Transfer Null: "{ }" *Transfer Null.Inverse: "{ 1 exch sub }" *% Paper Handling =================== *% Code in this section selects a tray and sets up a frame buffer. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter: "letter" *PageSize A4: "a4" *?PageSize: " save 2 dict dup /lettertray (Letter) put dup /a4tray (A4) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. Usually used with manual feed. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: "letter" *PageRegion A4: "a4" *CloseUI: *PageRegion *% The following entries provide information about specific paper keywords. *DefaultImageableArea: Letter *ImageableArea Letter: "18.0 7.44 593.76 775.2 " *ImageableArea A4: "17.28 9.84 577.68 825.6 " *?ImageableArea: " save /cvp { ( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore " *End *% These provide the physical dimensions of the paper (by keyword) *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension A4: "595 842" *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: OnlyOne *InputSlot OnlyOne: "" *CloseUI: *InputSlot *DefaultOutputBin: OnlyOne *DefaultOutputOrder: Normal *% Font Information ===================== *DefaultFont: Error *Font AvantGarde-Book: Standard "(001.001)" Standard *Font AvantGarde-BookOblique: Standard "(001.001)" Standard *Font AvantGarde-Demi: Standard "(001.001)" Standard *Font AvantGarde-DemiOblique: Standard "(001.001)" Standard *Font Courier: Standard "(001.004)" Standard *Font Courier-Bold: Standard "(001.004)" Standard *Font Courier-BoldOblique: Standard "(001.004)" Standard *Font Courier-Oblique: Standard "(001.004)" Standard *Font Helvetica: Standard "(001.001)" Standard *Font Helvetica-Bold: Standard "(001.001)" Standard *Font Helvetica-BoldOblique: Standard "(001.001)" Standard *Font Helvetica-Oblique: Standard "(001.001)" Standard *Font LubalinGraph-Book: Standard "(001.001)" Standard *Font LubalinGraph-BookOblique: Standard "(001.001)" Standard *Font LubalinGraph-Demi: Standard "(001.001)" Standard *Font LubalinGraph-DemiOblique: Standard "(001.001)" Standard *Font NewCenturySchlbk-Bold: Standard "(001.002)" Standard *Font NewCenturySchlbk-BoldItalic: Standard "(001.001)" Standard *Font NewCenturySchlbk-Italic: Standard "(001.001)" Standard *Font NewCenturySchlbk-Roman: Standard "(001.002)" Standard *Font Souvenir-Demi: Standard "(001.001)" Standard *Font Souvenir-DemiItalic: Standard "(001.001)" Standard *Font Souvenir-Light: Standard "(001.001)" Standard *Font Souvenir-LightItalic: Standard "(001.001)" Standard *Font Symbol: Special "(001.001)" Special *Font Times-Bold: Standard "(001.001)" Standard *Font Times-BoldItalic: Standard "(001.001)" Standard *Font Times-Italic: Standard "(001.001)" Standard *Font Times-Roman: Standard "(001.001)" Standard *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = } {exit} ifelse }bind loop (*) = flush restore " *End *?FontList: " save FontDirectory { pop == } bind forall flush (*) = flush restore " *End *% Printer Messages (verbatim from printer): *Message: "%%[ exitserver: permanent state may be changed ]%%" *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" *Message: "\FontName\ not found, using Courier" *% Status (format: %%[ status: ]%% ) *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "printing" *Status: "warming up" *Status: "PrinterError: optical error" *Status: "PrinterError: paper exit jam" *Status: "PrinterError: paper feed error" *Status: "PrinterError: fusing error" *Status: "PrinterError: internal controller memory error" *Status: "PrinterError: OPC synchronous mark error" *Status: "PrinterError: paper transporter jam" *Status: "PrinterError: tray cover open" *Status: "PrinterError: OPC belt bad & toner empty" *Status: "PrinterError: out of toner" *Status: "PrinterError: fuser cover open" *Status: "PrinterError: developer tray/side cover open" *Status: "PrinterError: toner collection container full" *Status: "PrinterError: offline" *Status: "PrinterError: out of paper" *Status: "PrinterError: main motor error" *Status: "PrinterError: OPC belt bad" *% Input Sources (format: %%[ status: ; source: ]%% ) *Source: "serial25" *% Printer Error (format: %%[ PrinterError: ]%%) *PrinterError: "optical error" *PrinterError: "paper exit jam" *PrinterError: "paper feed error" *PrinterError: "fusing error" *PrinterError: "internal controller memory error" *PrinterError: "OPC synchronous mark error" *PrinterError: "paper transporter jam" *PrinterError: "tray cover open" *PrinterError: "OPC belt bad & toner empty" *PrinterError: "out of toner" *PrinterError: "fuser cover open" *PrinterError: "developer tray/side cover open" *PrinterError: "toner collection container full" *PrinterError: "offline" *PrinterError: "out of paper" *PrinterError: "main motor error" *PrinterError: "OPC belt bad" *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% Produced by "bldppd4.0L1.ps" *% Last Edit Date: Jun 23 1993 *% The byte count of this file should be exactly 010206 or 010516 *% depending on the filesystem it resides in. *% end of PPD file for ScriptPrinter