*PPD-Adobe: "4.0" *% *% Note: For use with some ancient applications, e.g., Adobe Separator 3.2, *% it may be necessary to make a version of this file with the first line *% commented out. *% *% PTL SCCS ID "@(#)PPD 1.12 3/28/94"; *% *FormatVersion: "4.0" *FileVersion: "1.12" *LanguageVersion: English *% *Product: "(ActionLaser 1000)" *Product: "(ActionLaser 1500)" *% *PSVersion: "(130.05) 2834" *% *ModelName: "EPSON AL-1000/1500 EpsonScript" *% *% NickName can be customized by the local system administrator. *NickName: "EPSON AL-1000/1500 EpsonScript" *% *PCFileName: "ESCRIPT2.PPD" *%=== Basic Capabilities =============== *LanguageLevel: "2" *ColorDevice: False *DefaultColorSpace: Gray *Throughput: "6" *Protocols: TBCP *% Following numbers may be set for the particular printer (or for each *% available memory size) by typing "vmstatus exch sub == pop" for each *% memory size, JUST AFTER POWER UP. *% The FreeVM number is most useful for intelligent spoolers that can *% decide which printer to use, based on the known available memory. *% The number will of course vary for SelecType settings "USER INDIVIDUAL" vs. *% "USER AUTOSENSE", RX-BUFFER SIZE, etc. Actual usable memory size is *% affected by setting of PRINT MODE ("BAND" vs. "PAGE). *% *FreeVM: "913568" *VMOption None/Minimum PS2 Standard 1.5 MB RAM: "913568" *VMOption 2.0MB: "1395693" *VMOption 2.5MB: "1877818" *VMOption 3.0MB: "2359943" *VMOption 3.5MB: "2842068" *VMOption 4.0MB: "3324193" *VMOption 4.5MB: "3806318" *VMOption 5.0MB: "4288448" *% Following configs only possible for ActionLaser 1000 and EPL-5000. *VMOption 5.5MB: "4770568" *VMOption 6.0MB: "5252693" *VMOption 6.5MB: "5734818" *Password: "()" *ExitServer: " count 0 eq % Is password on stack? { false } { true exch startjob } ifelse not { (WARNING: Cannot modify initial VM.) = (Missing or invalid password.) = (Please contact author of this software.) = flush quit } if" *End *Reset: "count 0 eq % Is password on stack? { false } { true exch startjob } ifelse not { (WARNING: Cannot reset printer.) = (Missing or invalid password.) = (Please contact author of this software.) = flush quit } if systemdict /quit get exec (WARNING: Printer Reset Failed.) = flush" *End *%=== Resolution ====================== *DefaultResolution: 300dpi *?Resolution: "save currentpagedevice /HWResolution get 0 get ( ) cvs print (dpi) = flush restore" *End *% Epson RITech (Resolution Improvement Technology) *% This setting takes effect on the next page, and stays for future jobs. *% *OpenUI *Smoothing/Resolution Improve: PickOne *OrderDependency: 40 AnySetup *Smoothing *DefaultSmoothing: Default *% "Printer's default" appears twice for PSPrinter/LW8.0, once for EpsonScript. *Smoothing Default/Printer's default: "" *Smoothing Off: "<> setsystemparams" *Smoothing Light: "<> setsystemparams" *Smoothing Medium: "<> setsystemparams" *Smoothing Heavy: "<> setsystemparams" *% Return "Off" to also mean "Not available" for ActionLaser 1000 / EPL-5000. *?Smoothing: "save [(Off)(Off)(Light)(Medium)(Heavy)] currentsystemparams /REValue get 1 add get = flush restore" *End *CloseUI: *Smoothing *% User preference of Printer's Default Monochrome Screen. *% This setting is effective only for the current job. *% Phoenix Technologies' MultiGray (R) screening for 300dpi has *% the *appearance* of a 53 lpi screen at 45 degrees, but with better *% grayscale than a standard screen, i.e., less visible contouring. *% *OpenUI *PrefScreen/Dot Screen: PickOne *OrderDependency: 45 AnySetup *PrefScreen *DefaultPrefScreen: Default *PrefScreen Default/Printer's default: "" *PrefScreen Dot/Standard (60 lpi 45 deg):" <> setuserparams currentscreen setscreen" *End *PrefScreen MultiGray: " <> setuserparams currentscreen setscreen" *End *?PrefScreen: "save [(Dot)(MultiGray)] currentuserparams /PrefScreenValue get get = flush restore" *End *CloseUI: *PrefScreen *% Halftone Information =========================== *% *ScreenFreq: "60" *ScreenAngle: "45" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub}{dup mul exch dup mul add 1 exch sub}ifelse}" *End *ScreenProc Line: "{pop}" *ScreenProc Ellipse: "{dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub}" *End *DefaultTransfer: Null *Transfer Null: "{}" *Transfer Null.Inverse: "{1 exch sub}" *% === Paper Handling =================== *% Use these PageSize entries to set paper size unless there is specific reason *% to use PageRegion, such as when using manual feed. (PageSize is used *% when "Paper from" is set to "Auto Select" or "Automatic".) *OpenUI *PageSize: PickOne *OrderDependency: 20 AnySetup *PageSize *% *% Typically, set DefaultPageSize to Letter for ActionLaser 1000 and 1500. *% Typically, set DefaultPageSize to A4 for EPL-5000 and EPL-5200. *% This may be set to whatever is the most common PageSize at a site. *% (Per-job PageSize is not stored with the job by all Mac applications.) *DefaultPageSize: Letter *% *PageSize A4: "statusdict /a4tray get exec" *PageSize A5: "statusdict /a5tray get exec" *PageSize B5: "statusdict /b5tray get exec" *PageSize Letter: "statusdict /lettertray get exec" *PageSize Legal: "statusdict /legaltray get exec" *PageSize HalfLetter/Half Letter: "statusdict /halflettertray get exec" *PageSize Executive: "statusdict /executivetray get exec" *PageSize Govlgl/Government Legal: "statusdict /glgtray get exec" *PageSize Govltr/Government Letter: "statusdict /glttray get exec" *PageSize F4: "statusdict /f4tray get exec" *PageSize Monarch: "statusdict /monarchtray get exec" *PageSize Comm10/Commercial-10: "statusdict /com10tray get exec" *PageSize DL: "statusdict /dltray get exec" *PageSize C5: "statusdict /c5tray get exec" *?PageSize: "save 17 dict dup /a4 (A4) put dup /a5 (A5) put dup /b5 (B5) put dup /letter (Letter) put dup /legal (Legal) put dup /halfletter (HalfLetter) put dup /executivepage (Executive) put dup /glg (Govlgl) put dup /glt (Govltr) put dup /f4 (F4) put dup /monarch (Monarch) put dup /com10 (Comm10) put dup /dl (DL) put dup /c5 (C5) put paperdict { /pindex get currentsystemparams /PaperSize get eq { exit } { pop} ifelse } forall count 0 eq { (Unknown) }{ get } ifelse = flush restore" *End *CloseUI: *PageSize *% These entries set up the frame buffer. Usually used with manual feed. *% (These are intended to be ignored if emitted before InputSlot for *% this printer. I.e., InputSlot will override a preceding PageRegion.) *OpenUI *PageRegion: PickOne *OrderDependency: 14 AnySetup *PageRegion *% *% Typically, set DefaultPageRegion to Letter for ActionLaser 1000 and 1500. *% Typically, set DefaultPageRegion to A4 for EPL-5000 and EPL-5200. *DefaultPageRegion: Letter *% *PageRegion A4: "a4" *PageRegion A5: "a5" *PageRegion B5: "b5" *PageRegion Letter: "letter" *PageRegion Legal: "legal" *PageRegion HalfLetter/Half Letter: "halfletter" *PageRegion Executive: "executivepage" *PageRegion Govlgl/Government Legal: "glg" *PageRegion Govltr/Government Letter: "glt" *PageRegion F4: "f4" *PageRegion Monarch: "monarch" *PageRegion Comm10/Commercial-10: "com10" *PageRegion DL: "dl" *PageRegion C5: "c5" *CloseUI: *PageRegion *% These entries provide the imageable areas of the media option keywords. *% *% Typically, set DefaultImageableArea to Letter for ActionLaser 1000 and 1500. *% Typically, set DefaultImageableArea to A4 for EPL-5000 and EPL-5200. *DefaultImageableArea: Letter *% *ImageableArea A4: "12 10 582 833" *ImageableArea A5: "12 13 407 582" *ImageableArea B5: "12 10 504 716" *ImageableArea Letter: "12 9 599 784" *ImageableArea Legal: "12 8 599 1000" *ImageableArea HalfLetter/Half Letter: "12 13 383 599" *ImageableArea Executive: "12 13 509 744" *ImageableArea Govlgl/Government Legal: "12 13 599 923" *ImageableArea Govltr/Government Letter: "12 13 563 743" *ImageableArea F4: "12 13 582 923" *ImageableArea Monarch: "12 13 266 527" *ImageableArea Comm10/Commercial-10: "12 13 284 671" *ImageableArea DL: "12 13 299 611" *ImageableArea C5: "12 13 446 636" *?ImageableArea: "save /cvp {( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore" *End *% These provide the physical dimensions of the media, by option keyword. *% *% Typically, set DefaultPaperDimension to Letter for ActionLaser 1000 and 1500 *% Typically, set DefaultPaperDimension to A4 for EPL-5000 and EPL-5200. *DefaultPaperDimension: Letter *% *PaperDimension A4: "595 841" *PaperDimension A5: "419 595" *PaperDimension B5: "516 728" *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension HalfLetter/Half Letter: "396 612" *PaperDimension Executive: "522 756" *PaperDimension Govlgl/Government Legal: "612 936" *PaperDimension Govltr/Government Letter: "576 756" *PaperDimension F4: "595 935" *PaperDimension Monarch: "278 540" *PaperDimension Comm10/Commercial-10: "296 684" *PaperDimension DL: "311 623" *PaperDimension C5: "459 648" *% This controls the "Paper from" driver dialog. *OpenUI *InputSlot: PickOne *OrderDependency: 15 AnySetup *InputSlot *DefaultInputSlot: EpsonAuto *% *% The "Automatic" default causes tray-selection based on PageSize. *% Default appears to be "Automatic" for EpsonScript Driver, and equivalently, *% "Auto Select" for PSPrinter/LW8.0 . I.e., DefaultInputSlot is ignored. *% *InputSlot Upper/Standard Bin: "0 statusdict /setpapertray get exec" *InputSlot Lower/Optional Lower Cassette: "1 statusdict /setpapertray get exec" *InputSlot EpsonAuto/Like SelecType's INPUT AUTO: "3 statusdict /setpapertray get exec" *% EpsonAuto is equivalent to choosing "INPUT AUTO" on SelecType. *% It means: ignore the page size set on the Mac interface, and instead *% set up size according to SelecType's PAGE SIZE. (This permits failover *% use of both cassettes if they both have the same size paper.) *?InputSlot: " save 3 dict dup /3 (EpsonAuto) put dup /0 (Upper) put dup /1 (Lower) put statusdict /papertray get exec {get} stopped {pop pop (Unknown)} if = flush restore" *End *CloseUI: *InputSlot *% Font Information ===================== *% *% Note: "Helvetica", "Palatino" and "Times" are registered trademarks of *% Linotype AG and/or its subsidiaries. The PostScript interpreter *% addressed by this PPD will substitute the comparable Bitstream font *% families "Swiss", "Zapf Calligraphic", and "Dutch", respectively, *% for PostScript references to the former three names. *% *DefaultFont: Courier *Font AvantGarde-Book: Standard "(002)" Standard ROM *Font AvantGarde-BookOblique: Standard "(002)" Standard ROM *Font AvantGarde-Demi: Standard "(002)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(002)" Standard ROM *Font Bookman-Demi: Standard "(002)" Standard ROM *Font Bookman-DemiItalic: Standard "(002)" Standard ROM *Font Bookman-Light: Standard "(002)" Standard ROM *Font Bookman-LightItalic: Standard "(002)" Standard ROM *Font Courier: Standard "(002)" Standard ROM *Font Courier-Bold: Standard "(002)" Standard ROM *Font Courier-BoldOblique: Standard "(002)" Standard ROM *Font Courier-Oblique: Standard "(002)" Standard ROM *Font Helvetica: Standard "(002)" Standard ROM *Font Helvetica-Bold: Standard "(002)" Standard ROM *Font Helvetica-BoldOblique: Standard "(002)" Standard ROM *Font Helvetica-Narrow: Standard "(002)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(002)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(002)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(002)" Standard ROM *Font Helvetica-Oblique: Standard "(002)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(002)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(002)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(002)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(002)" Standard ROM *Font Palatino-Bold: Standard "(002)" Standard ROM *Font Palatino-BoldItalic: Standard "(002)" Standard ROM *Font Palatino-Italic: Standard "(002)" Standard ROM *Font Palatino-Roman: Standard "(002)" Standard ROM *Font Symbol: Standard "(002)" Standard ROM *Font Times-Bold: Standard "(002)" Standard ROM *Font Times-BoldItalic: Standard "(002)" Standard ROM *Font Times-Italic: Standard "(002)" Standard ROM *Font Times-Roman: Standard "(002)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(002)" Standard ROM *Font ZapfDingbats: Standard "(002)" Standard ROM *% *?FontQuery: "save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = flush } {exit} ifelse }bind loop (*) = flush restore" *End *?FontList: "save FontDirectory { pop == } bind forall flush (*) = flush restore" *End *% Printer Messages (verbatim from printer): *Message: "%%[ exitserver: permanent state may be changed ]%%" *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" *Message: "\FontName\ not found, using Courier" *% Status (format: %%[ status: ]%% ) *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "printing" *Status: "initializing" *% Input Sources (format: %%[ status: ; source: ]%% ) *Source: "Serial" *Source: "LocalTalk" *Source: "Parallel" *% Printer Error (format: %%[ PrinterError: ]%%) *% (Printer Errors are reported via the LCD display on the printer.) *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "18.43" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.43" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.43" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% end of PPD file for EPSON AL-1000/1500 EpsonScript.