*PPD-Adobe: "4.0" *% *% Note: For use with some ancient applications, e.g., Adobe Separator 3.2, *% it may be necessary to make a version of this file with the first line *% commented out. *% *% PTL SCCS ID "@(#)PPD 1.21 7/20/94"; *% *FormatVersion: "4.0" *FileVersion: "1.21" *LanguageVersion: English *% *Product: "(EPL-3000)" *% *PSVersion: "(132.07) 2834" *% *ModelName: "EPSON EPL-3000 EpsonScript" *% *% NickName can be customized by the local system administrator. *NickName: "EPSON EPL-3000 EpsonScript" *% *PCFileName: "ESCRIPT6.PPD" *%=== Basic Capabilities =============== *LanguageLevel: "2" *ColorDevice: False *DefaultColorSpace: Gray *Throughput: "4" *Protocols: TBCP *% Following numbers may be set for the particular printer (or for each *% available memory size) by typing "vmstatus exch sub == pop" for each *% memory size, JUST AFTER POWER UP. *% The FreeVM number is most useful for intelligent spoolers that can *% decide which printer to use, based on the known available memory. *% The number will of course vary for SelecType settings "USER INDIVIDUAL" vs. *% "USER AUTOSENSE", RX-BUFFER SIZE, etc. Actual usable memory size is *% affected by setting of PRINT MODE ("BAND" vs. "PAGE). *% *FreeVM: "1395693" *VMOption None/Minimum PS2 Standard 2.0 MB RAM: "1395693" *VMOption 3.0MB: "2359943" *VMOption 5.0MB: "4288448" *Password: "()" *ExitServer: " count 0 eq % Is password on stack? { false } { true exch startjob } ifelse not { (WARNING: Cannot modify initial VM.) = (Missing or invalid password.) = (Please contact author of this software.) = flush quit } if" *End *Reset: "count 0 eq % Is password on stack? { false } { true exch startjob } ifelse not { (WARNING: Cannot reset printer.) = (Missing or invalid password.) = (Please contact author of this software.) = flush quit } if systemdict /quit get exec (WARNING: Printer Reset Failed.) = flush" *End *%=== Resolution ====================== *DefaultResolution: 300dpi *?Resolution: "save currentpagedevice /HWResolution get 0 get ( ) cvs print (dpi) = flush restore" *End *% PageProtect / "Banding" support. *% *% Must be followed by a paper or tray operator to take effect! *% *OpenUI *PageProtect/Page Protect: PickOne *OrderDependency: 5 AnySetup *PageProtect *DefaultPageProtect: Default *% *PageProtect Default/Printer's default: "" *PageProtect Off: "<> setsystemparams" *PageProtect On: "<> setsystemparams" *CloseUI: *PageProtect *% Epson RITech (Resolution Improvement Technology) *% *OpenUI *Smoothing/Resolution Improve: PickOne *OrderDependency: 40 AnySetup *Smoothing *DefaultSmoothing: Default *% "Printer's default" appears twice for PSPrinter/LW8.0, once for EpsonScript. *Smoothing Default/Printer's default: "<> setsystemparams" *Smoothing Off: "<> setsystemparams" *Smoothing Light: "<> setsystemparams" *Smoothing Medium: "<> setsystemparams" *Smoothing Dark: "<> setsystemparams" *?Smoothing: "save [(Off)(Off)(Light)(Medium)(Dark)] currentsystemparams /REValue get 1 add get = flush restore" *End *CloseUI: *Smoothing *% User preference of Printer's Default Monochrome Screen. *% Phoenix Technologies' MultiGray (R) screening for 300dpi has *% the *appearance* of a 53 lpi screen at 45 degrees, but with better *% grayscale than a standard screen, i.e., less visible contouring. *% When MultiGray is selected, it overrides *all* user-specified screens. *% *OpenUI *MultiGray/Dot Screen: PickOne *OrderDependency: 60 AnySetup *MultiGray *DefaultMultiGray: Default *MultiGray Default/Printer's default: "" *MultiGray Off/Standard: " <> setuserparams currentscreen setscreen" *End *MultiGray On/MultiGray: " <> setuserparams currentscreen setscreen" *End *?MultiGray: "save [(Off)(On)] currentuserparams /PrefScreenValue get get = flush restore" *End *CloseUI: *MultiGray *% PS Error Sheet *% *OpenUI *PSerrorsheet/Error Sheet: PickOne *OrderDependency: 70 AnySetup *PSerrorsheet *DefaultPSerrorsheet: Default *% *PSerrorsheet Default/Printer's default: "" *PSerrorsheet Off: "<> setsystemparams" *PSerrorsheet On: "<> setsystemparams" *?PSerrorsheet: "save [(Off)(On)] currentsystemparams /DoErrorSheet get get = flush restore" *End *CloseUI: *PSerrorsheet *% PS Toner Save *% *OpenUI *TonerSave/Toner Save: PickOne *OrderDependency: 80 AnySetup *TonerSave *DefaultTonerSave: Default *% *TonerSave Default/Printer's default: "" *TonerSave Off: "<> setuserparams" *TonerSave On: "<> setuserparams" *?TonerSave: "save [(Off)(On)] currentuserparams /TonerSave get get = flush restore" *End *CloseUI: *TonerSave *% PS Toner Density *% *OpenUI *TonerDensity/Toner Density: PickOne *OrderDependency: 90 AnySetup *TonerDensity *DefaultTonerDensity: Default *% *TonerDensity Default/Printer's default: "<> setuserparams" *TonerDensity Lightest: "<> setuserparams" *TonerDensity Light: "<> setuserparams" *TonerDensity Medium: "<> setuserparams" *TonerDensity Dark: "<> setuserparams" *TonerDensity Darkest: "<> setuserparams" *?TonerDensity: "save [(Lightest)(Light)(Medium)(Dark)(Darkest)] currentuserparams /TonerDensity get get = flush restore" *End *CloseUI: *TonerDensity *% Halftone Information =========================== *% *ScreenFreq: "60" *ScreenAngle: "45" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub}{dup mul exch dup mul add 1 exch sub}ifelse}" *End *ScreenProc Line: "{pop}" *ScreenProc Ellipse: "{dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub}" *End *DefaultTransfer: Null *Transfer Null: "{}" *Transfer Null.Inverse: "{1 exch sub}" *% === Paper Handling =================== *% Use these PageSize entries to set paper size unless there is specific reason *% to use PageRegion, such as when using manual feed. (PageSize is used *% when "Paper from" is set to "Auto Select" or "Automatic".) *OpenUI *PageSize: PickOne *OrderDependency: 20 AnySetup *PageSize *% *% This may be set to whatever is the most common PageSize at a site. *% (Per-job PageSize is not stored with the job by all Mac applications.) *DefaultPageSize: A4 *% *PageSize A4: "statusdict /a4tray get exec" *PageSize A5: "statusdict /a5tray get exec" *PageSize B5: "statusdict /b5tray get exec" *PageSize Letter: "statusdict /lettertray get exec" *PageSize Legal: "statusdict /legaltray get exec" *PageSize HalfLetter/Half Letter: "statusdict /halflettertray get exec" *PageSize Executive: "statusdict /executivetray get exec" *PageSize Govlgl/Government Legal: "statusdict /glgtray get exec" *PageSize Govltr/Government Letter: "statusdict /glttray get exec" *PageSize F4: "statusdict /f4tray get exec" *PageSize Monarch: "statusdict /monarchtray get exec" *PageSize Comm10/Commercial-10: "statusdict /com10tray get exec" *PageSize DL: "statusdict /dlenvelopetray get exec" *PageSize C5: "statusdict /c5tray get exec" *PageSize C6: "statusdict /c6tray get exec" *PageSize ISOB5/International B5: "statusdict /enb5tray get exec" *?PageSize: "save 19 dict dup /a4 (A4) put dup /a5 (A5) put dup /b5 (B5) put dup /letter (Letter) put dup /legal (Legal) put dup /halfletter (HalfLetter) put dup /executivepage (Executive) put dup /glg (Govlgl) put dup /glt (Govltr) put dup /f4 (F4) put dup /monarch (Monarch) put dup /com10 (Comm10) put dup /dlenvelope (DL) put dup /c5 (C5) put dup /c6 (C6) put dup /enb5 (ISOB5) put paperdict { /pindex get currentsystemparams /PaperSize get eq { exit } { pop} ifelse } forall count 0 eq { (Unknown) }{ get } ifelse = flush restore" *End *CloseUI: *PageSize *% These entries set up the frame buffer. Usually used with manual feed. *% (These are intended to be ignored if emitted before InputSlot for *% this printer. I.e., InputSlot will override a preceding PageRegion.) *OpenUI *PageRegion: PickOne *OrderDependency: 14 AnySetup *PageRegion *% *DefaultPageRegion: A4 *% *PageRegion A4: "a4" *PageRegion A5: "a5" *PageRegion B5: "b5" *PageRegion Letter: "letter" *PageRegion Legal: "legal" *PageRegion HalfLetter/Half Letter: "halfletter" *PageRegion Executive: "executivepage" *PageRegion Govlgl/Government Legal: "glg" *PageRegion Govltr/Government Letter: "glt" *PageRegion F4: "f4" *PageRegion Monarch: "monarch" *PageRegion Comm10/Commercial-10: "com10" *PageRegion DL: "dlenvelope" *PageRegion C5: "c5" *PageRegion C6: "c6" *PageRegion ISOB5/International B5: "enb5" *CloseUI: *PageRegion *% These entries provide the imageable areas of the media option keywords. *% *DefaultImageableArea: A4 *% *ImageableArea A4: "12 10 582 833" *ImageableArea A5: "12 13 407 582" *ImageableArea B5: "12 10 504 716" *ImageableArea Letter: "12 9 599 784" *ImageableArea Legal: "12 8 599 1000" *ImageableArea HalfLetter/Half Letter: "12 13 383 599" *ImageableArea Executive: "12 13 509 743" *ImageableArea Govlgl/Government Legal: "12 13 599 923" *ImageableArea Govltr/Government Letter: "12 13 563 743" *ImageableArea F4: "12 13 582 923" *ImageableArea Monarch: "12 13 266 527" *ImageableArea Comm10/Commercial-10: "12 13 284 671" *ImageableArea DL: "12 13 299 611" *ImageableArea C5: "12 13 446 636" *ImageableArea C6: "12 13 310 447" *ImageableArea ISOB5/International B5: "12 13 486 696" *?ImageableArea: "save /cvp {( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore" *End *% These provide the physical dimensions of the media, by option keyword. *% *DefaultPaperDimension: A4 *% *PaperDimension A4: "595 841" *PaperDimension A5: "419 595" *PaperDimension B5: "516 728" *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension HalfLetter/Half Letter: "396 612" *PaperDimension Executive: "521 755" *PaperDimension Govlgl/Government Legal: "612 936" *PaperDimension Govltr/Government Letter: "576 756" *PaperDimension F4: "595 935" *PaperDimension Monarch: "278 540" *PaperDimension Comm10/Commercial-10: "296 684" *PaperDimension DL: "311 623" *PaperDimension C5: "459 648" *PaperDimension C6: "323 459" *PaperDimension ISOB5/International B5: "498 708" *% This controls the "Paper from" driver dialog. *OpenUI *InputSlot: PickOne *OrderDependency: 15 AnySetup *InputSlot *DefaultInputSlot: Upper *% *% The "Automatic" default causes tray-selection based on PageSize. *% Default appears to be "Automatic" for EpsonScript Driver, and equivalently, *% "Auto Select" for PSPrinter/LW8.0 . I.e., DefaultInputSlot is ignored. *InputSlot Upper/Standard Bin: "0 statusdict /setpapertray get exec <> setpagedevice" *End *InputSlot Manual/Manual Feed: "0 statusdict /setpapertray get exec <> setpagedevice" *End *?InputSlot: " save currentpagedevice /ManualFeed get {(Manual)} { 1 dict dup /0 (Upper) put statusdict /papertray get exec {get} stopped {pop pop (Unknown)} if } ifelse = flush restore" *End *CloseUI: *InputSlot *% Font Information ===================== *% *% Note: "Helvetica", "Palatino" and "Times" are registered trademarks of *% Linotype AG and/or its subsidiaries. The PostScript interpreter *% addressed by this PPD will substitute the comparable Bitstream font *% families "Swiss", "Zapf Calligraphic", and "Dutch", respectively, *% for PostScript references to the former three names. *% *DefaultFont: Courier *Font AvantGarde-Book: Standard "(002)" Standard ROM *Font AvantGarde-BookOblique: Standard "(002)" Standard ROM *Font AvantGarde-Demi: Standard "(002)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(002)" Standard ROM *Font Bookman-Demi: Standard "(002)" Standard ROM *Font Bookman-DemiItalic: Standard "(002)" Standard ROM *Font Bookman-Light: Standard "(002)" Standard ROM *Font Bookman-LightItalic: Standard "(002)" Standard ROM *Font Courier: Standard "(002)" Standard ROM *Font Courier-Bold: Standard "(002)" Standard ROM *Font Courier-BoldOblique: Standard "(002)" Standard ROM *Font Courier-Oblique: Standard "(002)" Standard ROM *Font Helvetica: Standard "(002)" Standard ROM *Font Helvetica-Bold: Standard "(002)" Standard ROM *Font Helvetica-BoldOblique: Standard "(002)" Standard ROM *Font Helvetica-Narrow: Standard "(002)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(002)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(002)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(002)" Standard ROM *Font Helvetica-Oblique: Standard "(002)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(002)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(002)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(002)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(002)" Standard ROM *Font Palatino-Bold: Standard "(002)" Standard ROM *Font Palatino-BoldItalic: Standard "(002)" Standard ROM *Font Palatino-Italic: Standard "(002)" Standard ROM *Font Palatino-Roman: Standard "(002)" Standard ROM *Font Symbol: Standard "(002)" Standard ROM *Font Times-Bold: Standard "(002)" Standard ROM *Font Times-BoldItalic: Standard "(002)" Standard ROM *Font Times-Italic: Standard "(002)" Standard ROM *Font Times-Roman: Standard "(002)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(002)" Standard ROM *Font ZapfDingbats: Standard "(002)" Standard ROM *% *?FontQuery: "save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = flush } {exit} ifelse }bind loop (*) = flush restore" *End *?FontList: "save FontDirectory { pop == } bind forall flush (*) = flush restore" *End *% Printer Messages (verbatim from printer): *Message: "%%[ exitserver: permanent state may be changed ]%%" *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" *Message: "\FontName\ not found, using Courier" *% Status (format: %%[ status: ]%% ) *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "printing" *Status: "initializing" *% Input Sources (format: %%[ status: ; source: ]%% ) *Source: "Serial" *Source: "LocalTalk" *Source: "Parallel" *% Printer Error (format: %%[ PrinterError: ]%%) *% (Printer Errors are reported via the LCD display on the printer.) *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "18.43" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.43" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.43" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% end of PPD file for EPSON EPL-3000 EpsonScript.