*PPD-Adobe: "4.0" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1992 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *% *FormatVersion: "4.0" *FileVersion: "2.2" *PCFileName: "MOIM1201.PPD" *LanguageVersion: English *Product: "(Monotype Imagesetter)" *PSVersion: "(52.3) 2.11" *ModelName: "Monotype ImageMaster 1200" *NickName: "Monotype ImageMaster 1200 v52.3" *% ======== Constraints ========== *UIConstraints: *InputSlot Lower *PageSize Letter *UIConstraints: *InputSlot Lower *PageSize Legal *UIConstraints: *InputSlot Lower *PageSize Ledger *UIConstraints: *InputSlot Lower *PageRegion Letter *UIConstraints: *InputSlot Lower *PageRegion Legal *UIConstraints: *InputSlot Lower *PageRegion Ledger *UIConstraints: *InputSlot Upper *PageSize Letter *UIConstraints: *InputSlot Upper *PageSize Legal *UIConstraints: *InputSlot Upper *PageSize Ledger *UIConstraints: *InputSlot Upper *PageRegion Letter *UIConstraints: *InputSlot Upper *PageRegion Legal *UIConstraints: *InputSlot Upper *PageRegion Ledger *% General Information and Defaults =============== *FreeVM: "2353786" *LanguageLevel: "1" *Extensions: CMYK FileSystem *ColorDevice: False *DefaultColorSpace: Gray *VariablePaperSize: True *FileSystem: True *?FileSystem: " save statusdict /diskonline get exec {(True)}{(False)} ifelse = flush restore " *End *Throughput: "7" *Password: "0" *ExitServer: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *DefaultResolution: 600dpi *?Resolution: " save initgraphics 0 0 moveto currentpoint matrix defaultmatrix transform 0 72 lineto currentpoint matrix defaultmatrix transform 3 -1 roll sub dup mul 3 1 roll exch sub dup mul add sqrt round cvi ( ) cvs print (dpi) = flush restore " *End *% Halftone Information =============== *ScreenFreq: "85.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Null *Transfer Null: "{}" *Transfer Null.Inverse: "{ 1 exch sub }" *% Paper Handling =================== *% Use these entries to set paper size most of the time, unless there is *% specific reason to use PageRegion. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Unknown *PageSize Letter: "statusdict /lettertray get exec letter" *PageSize Legal: "statusdict /legaltray get exec" *PageSize Ledger: "statusdict /ledgertray get exec" *PageSize A3: "statusdict /a3tray get exec a3" *PageSize A4: "statusdict /a4tray get exec a4" *PageSize A5: "statusdict /a5tray get exec a5" *?PageSize: " save mark statusdict /pageparams get exec pop pop (Unknown) 3 dict dup [612 792] (Letter) put dup [612 1008] (Legal) put dup [1224 792] (Ledger) put dup [420 595] (A5) put dup [595 842] (A4) put dup [842 1191] (A3) put { exch aload pop 4 index eq exch 5 index eq and { exch pop exit } { pop } ifelse } bind forall = flush cleartomark restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. Usually used with manual feed. *% Extra sizes available through manual feed, not in trays. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Unknown *PageRegion Letter: "letter" *PageRegion Legal: "legal" *PageRegion Ledger: "ledger" *PageRegion A3: "a3" *PageRegion A4: "a4" *PageRegion A5: "a5" *CloseUI: *PageRegion *% The following entries provide information about specific paper keywords. *DefaultImageableArea: Unknown *ImageableArea Letter: "9 11 603 781 " *ImageableArea Legal: "9 11 603 997 " *ImageableArea Ledger: "9 11 1215 781 " *ImageableArea A3: "9 11 833 1179 " *ImageableArea A4: "9 11 586 831 " *ImageableArea A5: "0 1 422 595 " *?ImageableArea: " save /cvp {( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore " *End *% These provide the physical dimensions of the paper (by keyword) *DefaultPaperDimension: Unknown *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension Ledger: "1224 792" *PaperDimension A3: "842 1191" *PaperDimension A4: "595 842" *PaperDimension A5: "420 595" *DefaultOutputBin: OnlyOne *DefaultOutputOrder: Normal *RequiresPageRegion All: True *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: Lower *InputSlot Upper: "0 statusdict /setpapertray get exec" *InputSlot Lower: "1 statusdict /setpapertray get exec" *?InputSlot: " save [ (Upper) (Lower) ] statusdict /papertray get exec {get exec} stopped { pop pop (Unknown)} if = flush restore " *End *CloseUI: *InputSlot *OpenUI *ManualFeed: Boolean *OrderDependency: 20 AnySetup *ManualFeed *DefaultManualFeed: False *ManualFeed True: "statusdict /manualfeed true put" *ManualFeed False: "statusdict /manualfeed false put" *?ManualFeed: "save statusdict /manualfeed get {(True)}{(False)}ifelse = flush restore" *End *CloseUI: *ManualFeed *% Font Information ===================== *DefaultFont: Courier *Font Courier: Standard "(001.004)" Standard ROM *Font Courier-Bold: Standard "(002.002)" Standard ROM *Font Courier-BoldOblique: Standard "(002.002)" Standard ROM *Font Courier-Oblique: Standard "(002.002)" Standard ROM *Font Helvetica: Standard "(001.006)" Standard ROM *Font Helvetica-Bold: Standard "(001.007)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.007)" Standard ROM *Font Helvetica-Narrow: Standard "(001.006)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.007)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.007)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.006)" Standard ROM *Font Helvetica-Oblique: Standard "(001.006)" Standard ROM *Font Symbol: Special "(001.003)" Special ROM *Font Times-Bold: Standard "(001.007)" Standard ROM *Font Times-BoldItalic: Standard "(001.009)" Standard ROM *Font Times-Italic: Standard "(001.007)" Standard ROM *Font Times-Roman: Standard "(001.007)" Standard ROM *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = } {exit} ifelse }bind loop (*) = flush restore " *End *?FontList: " save FontDirectory { pop == } bind forall flush /filenameforall where { pop (fonts/*) { dup length 6 sub 6 exch getinterval cvn == } bind 128 string filenameforall flush } if (*) = flush restore " *End *% Printer Messages (verbatim from printer): *Message: "%%[ exitserver: permanent state may be changed ]%%" *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" *Message: "\FontName\ not found, using Courier" *% Status (format: %%[ status: ]%% ) *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "printing" *Status: "warming up" *Status: "PrinterError: Serious printer fault" *Status: "PrinterError: Printer is out of paper" *Status: "PrinterError: Paper is jammed in printer" *Status: "PrinterError: Printer is out of toner" *Status: "PrinterError: Used toner container is full" *Status: "PrinterError: Printer cover is open" *Status: "PrinterError: Material error" *Status: "PrinterError: Laser error" *Status: "PrinterError: Output unit is halted" *Status: "PrinterError: Cassette not loaded" *Status: "PrinterError: Knife error" *Status: "PrinterError: On-line transport jammed" *Status: "PrinterError: On-line transport fault" *Status: "PrinterError: Automatic film loading error" *Status: "PrinterError: Lazy loop error" *Status: "PrinterError: Printer is warming up" *Status: "PrinterError: Printer is running self test" *Status: "PrinterError: Optimum cut occuring" *Status: "PrinterError: Automatic film loading" *Status: "PrinterError: Automatic film unloading" *Status: "PrinterError: Printer offline" *Status: "PrinterError: On-line Transport is busy" *Status: "PrinterError: Printer is feeding film" *Status: "PrinterError: Requested output resolution not supported" *Status: "PrinterError: Requested feed factor not supported" *Status: "PrinterError: Requested film advance not supported" *Status: "PrinterError: Requested exposure value not supported" *Status: "PrinterError: Requested negative printing not supported" *Status: "PrinterError: Illegal Page Buffer mode" *Status: "PrinterError: Output unit error" *Status: "PrinterError: Output unit communications broken down" *Status: "PrinterError: Laserplex communications broken down" *Status: "PrinterError: Selected LaserBus not available" *Status: "PrinterError: Selected LaserBus busy" *Status: "PrinterError: Page Buffer communications broken down" *Status: "PrinterError: Page Buffer busy" *Status: "PrinterError: Page Buffer error" *Status: "PrinterError: Offline or busy" *Status: "PrinterError: Unspecified LaserBus/LaserPlex/PageBuffer error" *Status: "PrinterError: Unspecified RipSwitch command" *Status: "PrinterError: Unknown output unit status response" *Status: "PrinterError: Interface card communications breakdown" *Status: "PrinterError: Unknown printer error" *Status: "PrinterError: Graphics Server not available, or parameter error" *Status: "PrinterError: Graphics Server disk error" *Status: "PrinterError: Graphics Server disk full" *Status: "PrinterError: Graphics Server parameter error" *% Input Sources (format: %%[ status: ; source: ]%% ) *Source: "serial 9" *Source: "serial 25" *Source: "AppleTalk" *Source: "Centronics" *% Printer Error (format: %%[ PrinterError: ]%%) *PrinterError: "Serious printer fault" *PrinterError: "Printer is out of paper" *PrinterError: "Paper is jammed in printer" *PrinterError: "Printer is out of toner" *PrinterError: "Used toner container is full" *PrinterError: "Printer cover is open" *PrinterError: "Material error" *PrinterError: "Laser error" *PrinterError: "Output unit is halted" *PrinterError: "Cassette not loaded" *PrinterError: "Knife error" *PrinterError: "On-line transport jammed" *PrinterError: "On-line transport fault" *PrinterError: "Automatic film loading error" *PrinterError: "Lazy loop error" *PrinterError: "Printer is warming up" *PrinterError: "Printer is running self test" *PrinterError: "Optimum cut occuring" *PrinterError: "Automatic film loading" *PrinterError: "Automatic film unloading" *PrinterError: "Printer offline" *PrinterError: "On-line Transport is busy" *PrinterError: "Printer is feeding film" *PrinterError: "Requested output resolution not supported" *PrinterError: "Requested feed factor not supported" *PrinterError: "Requested film advance not supported" *PrinterError: "Requested exposure value not supported" *PrinterError: "Requested negative printing not supported" *PrinterError: "Illegal Page Buffer mode" *PrinterError: "Output unit error" *PrinterError: "Output unit communications broken down" *PrinterError: "Laserplex communications broken down" *PrinterError: "Selected LaserBus not available" *PrinterError: "Selected LaserBus busy" *PrinterError: "Page Buffer communications broken down" *PrinterError: "Page Buffer busy" *PrinterError: "Page Buffer error" *PrinterError: "Offline or busy" *PrinterError: "Unspecified LaserBus/LaserPlex/PageBuffer error" *PrinterError: "Unspecified RipSwitch command" *PrinterError: "Unknown output unit status response" *PrinterError: "Interface card communications breakdown" *PrinterError: "Unknown printer error" *PrinterError: "Graphics Server not available, or parameter error" *PrinterError: "Graphics Server disk error" *PrinterError: "Graphics Server disk full" *PrinterError: "Graphics Server parameter error" *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 85 lpi / 600 dpi (5,5,2,6,6,2,20/3,0) ===================== *ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0" *ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" *ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528" *ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" *ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683" *ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0" *ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: " {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse }" *End *% For 71 lpi / 600 dpi =============================== *ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0" *ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" *ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107" *ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" *ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456" *ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667" *% For "Monotype Imagesetter" version 52.3 *% Produced by "BuildPPD.ps" version 3.0 edit 58 *% Converted to meet 4.0 specification *% Last Edit Date: Nov 30 1992 *% The byte count of this file should be exactly 015778 or 016224 *% depending on the filesystem it resides in. *% end of PPD file for Monotype Imagesetter