*% Tektronix Tekscript(R) Printer Description File
*% For Phaser-CP version v2.02 
*%
*% Copyright 1990 Tektronix Incorporated.  All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*%
*% The byte count of this file should be exactly 10060 or 10360
*% depending on the filesystem it resides in.
*%
*% Date: 1/03/90
*% Modified by Microsoft 1/22/99 a-roblow added LanguageLevel 1
*FormatVersion: "3.0"
*FileVersion: "1.0"
*LanguageVersion: English
*Manufacturer: "Tektronix"
*Product: "(Phaser II PX)"
*PSVersion: "(49.4) 0"
*NickName: "Tektronix Phaser II PX"

*% General Information and Defaults ===============
*ColorDevice: True
*LanguageLevel: "1"
*% The VM is the minimal guaranteed, different installations may have more
*FreeVM: "700000"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "1"
*Password: "0"
*ExitServer: "
  count 0 eq {  % is the password on the stack?
    true 
  }{
    dup % potential password
    statusdict begin checkpassword end not
  } ifelse 
  {  %  if no password or not valid 
    (WARNING : Cannot perform the exitserver command.) = 
    (Password supplied is not valid.) = 
    (Please contact the author of this software.) = flush
    quit
  } if 
  serverdict begin exitserver
"
*End

*Reset: "
  count 0 eq {  % is the password on the stack?
    true 
  }{
    dup % potential password
    statusdict begin checkpassword end not
  } ifelse 
  {  %  if no password or not valid 
    (WARNING : Cannot reset printer.) = 
    (Password supplied is not valid.) = 
    (Please contact the author of this software.) = flush
    quit
  } if 
  serverdict begin exitserver
  systemdict /quit get exec
  (WARNING : Printer Reset Failed.) = flush
"
*End

*DefaultResolution: 300dpi
*?Resolution: "
save
  initgraphics
  0 0 moveto currentpoint matrix defaultmatrix transform
  0 72 lineto currentpoint matrix defaultmatrix transform
  3 -1 roll sub dup mul
  3 1 roll exch sub dup mul
  add sqrt round cvi
  (          ) cvs print (dpi) = flush
restore
"
*End

*% Halftone Information ===============
*ScreenFreq: "60"
*ScreenAngle: "37"
*DefaultScreenProc: Dot
*ScreenProc Dot: "{dup mul exch dup mul add neg 1.0 add }"
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"

*% Paper Handling ===================

*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion or PaperTray.
*DefaultPageSize: Letter
*PageSize Letter: "letter"
*PageSize A4: "a4"
*PageSize Legal: "legal"
*?PageSize: "(Unknown) == flush"

*% These entries will set up the frame buffer. Usually used with manual feed.
*DefaultPageRegion: Letter
*PageRegion Letter: "letter"
*PageRegion A4: "a4"
*PageRegion Legal: "legal"

*% These entries will invoke a particular tray--error may occur if tray is not inserted.
*% These errors should be trapped by software and a message displayed
*DefaultPaperTray: None
*?PaperTray: "(Unknown) == flush"

*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "13 6 599 786 "
*ImageableArea A4: "13 31 582 811 "
*ImageableArea Legal: "13 114 599 894 "
*?ImageableArea: "
 save /cvp { cvi (            ) cvs print ( ) print } bind def
  newpath clippath pathbbox
  4 -2 roll exch 2 {ceiling cvp} repeat
  exch 2 {floor cvp} repeat flush
 restore
"
*End

*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension A4: "595 842"
*PaperDimension Legal: "612 1008"

*DefaultOutputBin: OnlyOne
*DefaultInputSlot: None
*DefaultManualFeed: None
*DefaultOutputOrder: Reverse
*DefaultCollator: None
*DefaultSorter: None
*DefaultDuplex: None

*% Font Information =====================

*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.002)"
*Font AvantGarde-BookOblique: Standard "(001.002)"
*Font AvantGarde-Demi: Standard "(001.003)"
*Font AvantGarde-DemiOblique: Standard "(001.003)"
*Font Bookman-Demi: Standard "(001.001)"
*Font Bookman-DemiItalic: Standard "(001.001)"
*Font Bookman-Light: Standard "(001.001)"
*Font Bookman-LightItalic: Standard "(001.001)"
*Font Courier: Standard "(001.004)"
*Font Courier-Bold: Standard "(001.004)"
*Font Courier-BoldOblique: Standard "(001.004)"
*Font Courier-Oblique: Standard "(001.004)"
*Font Helvetica: Standard "(001.002)"
*Font Helvetica-Bold: Standard "(001.002)"
*Font Helvetica-BoldOblique: Standard "(001.002)"
*Font Helvetica-Narrow: Standard "(001.001)"
*Font Helvetica-Narrow-Bold: Standard "(001.002)"
*Font Helvetica-Narrow-BoldOblique: Standard "(001.002)"
*Font Helvetica-Narrow-Oblique: Standard "(001.001)"
*Font Helvetica-Oblique: Standard "(001.002)"
*Font NewCenturySchlbk-Bold: Standard "(001.005)"
*Font NewCenturySchlbk-BoldItalic: Standard "(001.004)"
*Font NewCenturySchlbk-Italic: Standard "(001.003)"
*Font NewCenturySchlbk-Roman: Standard "(001.004)"
*Font Palatino-Bold: Standard "(001.002)"
*Font Palatino-BoldItalic: Standard "(001.002)"
*Font Palatino-Italic: Standard "(001.002)"
*Font Palatino-Roman: Standard "(001.001)"
*Font Symbol: Special "(001.003)"
*Font Times-Bold: Standard "(001.002)"
*Font Times-BoldItalic: Standard "(001.004)"
*Font Times-Italic: Standard "(001.002)"
*Font Times-Roman: Standard "(001.002)"
*Font ZapfChancery-MediumItalic: Standard "(001.003)"
*Font ZapfDingbats: Special "(001.001)"
*?FontQuery: "
save  4 dict begin /sv exch def
/str (fonts/                              ) def
/st2 128 string def
{
  count 0 gt {
    dup st2 cvs (/) print print (:) print
    dup FontDirectory exch known {pop (Yes)}{
     str exch st2 cvs dup length /len exch def
     6 exch putinterval str 0 len 6 add getinterval mark exch
     { } st2 filenameforall counttomark 0 gt {
      cleartomark (Yes)}{cleartomark (No)}ifelse
    }ifelse = flush
  }{ exit } ifelse
} bind loop 
(*) = flush
sv end restore
"
*End

*?FontList: "
save  2 dict begin /sv exch def
/str 128 string def
FontDirectory { pop == } bind forall flush 
/filenameforall where { 
 pop save (fonts/*) { 
  dup length 6 sub 6 exch getinterval cvn ==  
 } bind str filenameforall flush restore
} if 
(*) = flush
sv end restore
"
*End

*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "initializing"
*Status: "printing test page"
*Status: "PrinterError: end of ribbon"
*Status: "PrinterError: out of paper"
*Status: "PrinterError: printer fault"
*Status: "PrinterError: printer offline"

*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*% Please edit list below and remove % from each line as appropriate:
*Source: "com"
*Source: "lpt"

*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "output hardware fault (see manual)"
*PrinterError: "printer not responding"
*PrinterError: "interface fault (see manual)"
*PrinterError: "printer disconnected or power off"
*PrinterError: "printer disconnected"
*PrinterError: "printer power off"
*PrinterError: "error code xx (see manual)"
*PrinterError: "resetting printer"
*PrinterError: "warming up"
*PrinterError: "error code xxxxxxx (see manual)"
*PrinterError: "printer out of memory"
*PrinterError: "printer hard fault (see manual)"
*PrinterError: "printer timed out"
*PrinterError: "out of ribbon"
*PrinterError: "out of paper"
*PrinterError: "cover open"
*PrinterError: "printer reports failure (see manual)"
*PrinterError: "head temperature (see manual)"
*PrinterError: "ribbon jam"
*PrinterError: "paper jam"
*PrinterError: "paper entry misfeed"
*PrinterError: "non-fatal internal error (see manual)"
*PrinterError: "printer not ready"

*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"

*% Color Separation Information =====================

*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*% For 60 lpi / 300 dpi =====================================================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*% For 57 lpi / 300 dpi =====================================================

*ColorSepScreenAngle ProcessBlack.57lpi.300dpi/57 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.57lpi.300dpi/57 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.57lpi.300dpi/57 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.57lpi.300dpi/57 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.57lpi.300dpi/57 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.57lpi.300dpi/57 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.57lpi.300dpi/57 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.57lpi.300dpi/57 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.57lpi.300dpi/57 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.57lpi.300dpi/57 lpi / 300 dpi: "50.0"
  
*% end of PPD file for Tektronix Phaser-CP