*PPD-Adobe: "4.0" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1992 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *FormatVersion: "4.0" *FileVersion: "2.2" *PCFileName: "UNI17521.PPD" *LanguageVersion: English *Product: "(IBM LaserPrinter)" *PSVersion: "(52.1) 0" *ModelName: "UNISYS AP9210 17 Fonts" *NickName: "UNISYS AP9210 17 Fonts v52.1" *% ==== Options and Constraints ===== *OpenGroup: InstallableOptions/Options Installed *OpenUI *Option1/Optional Lower Tray: Boolean *DefaultOption1: False *Option1 True/Installed: "" *Option1 False/Not Installed: "" *CloseUI: *Option1 *OpenUI *Option2/Optional Envelope Feeder: Boolean *DefaultOption2: False *Option2 True/Installed: "" *Option2 False/Not Installed: "" *CloseUI: *Option2 *OpenUI *Option3/Memory Configuration: PickOne *DefaultOption3: None *Option3 None/Minimum 2.5 MB: "" *Option3 3Meg/Upgrade to 3.5 MB: "" *Option3 4Meg/Upgrade to 4.5 MB: "" *CloseUI: *Option3 *CloseGroup: InstallableOptions *UIConstraints: *Option1 False *InputSlot Lower *UIConstraints: *Option2 False *InputSlot Envelope *UIConstraints: *Option3 None *PageSize Legal *UIConstraints: *Option3 None *PageRegion Legal *UIConstraints: *Option3 3Meg *PageSize Legal *UIConstraints: *Option3 3Meg *PageRegion Legal *% General Information and Defaults =============== *FreeVM: "179196" *LanguageLevel: "1" *ColorDevice: False *DefaultColorSpace: Gray *VariablePaperSize: False *FileSystem: False *Throughput: "10" *Password: "0" *ExitServer: " count 0 eq % is the password on the stack? { true } { dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq % is the password on the stack? { true } { dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *DefaultResolution: 300dpi *?Resolution: " save initgraphics 0 0 moveto currentpoint matrix defaultmatrix transform 0 72 lineto currentpoint matrix defaultmatrix transform 3 -1 roll sub dup mul 3 1 roll exch sub dup mul add sqrt round cvi ( ) cvs print (dpi) = flush restore " *End *% Halftone Information =============== *ScreenFreq: "60.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: " { dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub } " *End *DefaultTransfer: Null *Transfer Null: "{ }" *Transfer Null.Inverse: "{ 1 exch sub }" *% Paper Handling =================== *% Use these entries to set paper size most of the time, unless there is *% specific reason to use PageRegion. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter: "statusdict /lettertray get exec" *PageSize Legal: "statusdict /legaltray get exec" *PageSize Executive: "statusdict /executivetray get exec" *PageSize A4: "statusdict /a4tray get exec" *PageSize A5: "statusdict /a5tray get exec" *PageSize B5: "statusdict /b5tray get exec" *PageSize Monarch/Monarch Envelope: "statusdict /3.875x7.5envelopetray get exec" *PageSize Envelope.279.639/C9 Envelope: "statusdict /3.875x8.875envelopetray get exec" *PageSize Comm10/C10 Envelope: "statusdict /4.125x9.5envelopetray get exec" *PageSize DL/DL Envelope: "statusdict /110x220envelopetray get exec" *PageSize C5/C5 Envelope: "statusdict /162x229envelopetray get exec" *PageSize Envelope.499.709/B5 Envelope: "statusdict /176x250envelopetray get exec" *?PageSize: " save 12 dict dup /letter (Letter) put dup /legal (Legal) put dup /a4 (A4) put dup /a5 (A5) put dup /b5 (B5) put dup /executive (Executive) put dup /3.875x7.5envelope (Monarch) put dup /3.875x8.875envelope (Envelope.279.639) put dup /4.125x9.5envelope (Comm10) put dup /110x220envelope (DL) put dup /162x229envelope (C5) put dup /176x250envelope (Envelope.499.709) put statusdict /papersize get exec 3 1 roll {get} stopped {(Unknown)}if exch not { print (.Transverse) }if = flush restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. Usually used with manual feed. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: "letter" *PageRegion Legal: "legal" *PageRegion A4: "a4" *PageRegion A5: "a5" *PageRegion B5: "b5" *PageRegion Executive: "executivepage" *PageRegion Monarch/Monarch Envelope: "3.875x7.5envelope" *PageRegion Envelope.279.639/C9 Envelope: "3.875x8.875envelope" *PageRegion Comm10/C10 Envelope: "4.125x9.5envelope" *PageRegion DL/DL Envelope: "110x220envelope" *PageRegion C5/C5 Envelope: "162x229envelope" *PageRegion Envelope.499.709/B5 Envelope: "176x250envelope" *CloseUI: *PageRegion *% The following entries provide information about specific paper keywords. *DefaultImageableArea: Letter *ImageableArea Letter: "18 17 597 776 " *ImageableArea Legal: "18 18 597 992 " *ImageableArea A4: "18 19 578 827 " *ImageableArea A5: "18 13 405 580 " *ImageableArea B5: "18 18 505 711 " *ImageableArea Executive: "18 18 505 740" *ImageableArea Monarch/Monarch Envelope: "18 13 278 527" *ImageableArea Envelope.279.639/C9 Envelope: "18 14 278 623" *ImageableArea Comm10/C10 Envelope: "18 15 294 668" *ImageableArea DL/DL Envelope: "18 14 309 608" *ImageableArea C5/C5 Envelope: "18 12 455 634" *ImageableArea Envelope.499.709/B5 Envelope: "18 13 497 693" *?ImageableArea: " save /cvp {( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore " *End *% These provide the physical dimensions of the paper (by keyword) *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension A4: "595 842" *PaperDimension A5: "420 595" *PaperDimension B5: "516 729" *PaperDimension Executive: "522 756" *PaperDimension Monarch/Monarch Envelope: "279 540" *PaperDimension Envelope.279.639/C9 Envelope: "279 639" *PaperDimension Comm10/C10 Envelope: "297 684" *PaperDimension DL/DL Envelope: "312 624" *PaperDimension C5/C5 Envelope: "459 649" *PaperDimension Envelope.499.709/B5 Envelope: "499 709" *RequiresPageRegion All: True *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: Upper *InputSlot Upper: "0 statusdict /setpapertray get exec" *InputSlot Lower: "1 statusdict /setpapertray get exec" *InputSlot Envelope: "2 statusdict /setpapertray get exec" *InputSlot Manual: "3 statusdict /setpapertray get exec" *InputSlot ManualEnvelope: "4 statusdict /setpapertray get exec" *?InputSlot: " save [ (Upper) (Lower) (Envelope) (Manual) (ManualEnvelope) ] statusdict /papertray get exec {get exec} stopped { pop pop (Unknown)} if = flush restore " *End *CloseUI: *InputSlot *OpenUI *ManualFeed: Boolean *OrderDependency: 20 AnySetup *ManualFeed *DefaultManualFeed: False *ManualFeed True: "statusdict /manualfeed true put" *ManualFeed False: "statusdict /manualfeed false put" *?ManualFeed: " save statusdict /manualfeed get {(True)}{(False)}ifelse = flush restore " *End *CloseUI: *ManualFeed *DefaultOutputOrder: Normal *% Font Information ===================== *DefaultFont: Courier *Font Courier: Standard "(001.004)" Standard ROM *Font Courier-Bold: Standard "(001.004)" Standard ROM *Font Courier-BoldOblique: Standard "(001.004)" Standard ROM *Font Courier-Oblique: Standard "(001.004)" Standard ROM *Font Helvetica: Standard "(001.002)" Standard ROM *Font Helvetica-Bold: Standard "(001.002)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.002)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.002)" Standard ROM *Font Helvetica-Oblique: Standard "(001.002)" Standard ROM *Font Symbol: Special "(001.003)" Special ROM *Font Times-Bold: Standard "(001.002)" Standard ROM *Font Times-BoldItalic: Standard "(001.004)" Standard ROM *Font Times-Italic: Standard "(001.002)" Standard ROM *Font Times-Roman: Standard "(001.002)" Standard ROM *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print print (:) print FontDirectory exch known {(Yes)}{(No)} ifelse = } {exit} ifelse }bind loop (*) = flush restore " *End *?FontList: " save FontDirectory { pop == } bind forall flush (*) = flush restore " *End *% Printer Messages (verbatim from printer): *Message: "%% exitserver: permanent state may be changed %%" *Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%" *Message: "FontName\ not found, using Courier" *% Status (format: %% status: %% ) *Status: "Printer Busy" *Status: "Warming Up" *Status: "PrinterError: Printer Offline" *Status: "PrinterError: Paper Out or Feed Failure - Tray 1" *Status: "PrinterError: Paper Out or Feed Failure - Tray 2" *Status: "PrinterError: Paper Out or Feed Failure - Envelope Feeder" *Status: "PrinterError: Load Paper Requested" *Status: "PrinterError: Load Envelope Requested" *Status: "PrinterError: Invalid Manual Insertion" *Status: "PrinterError: Wrong Paper Length" *Status: "PrinterError: Paper Jam" *Status: "PrinterError: Cover Open/Cartridge Not Installed" *Status: "PrinterError: Output Bin Full" *Status: "PrinterError: Default Storage Error" *Status: "PrinterError: Battery Low - Slot 1" *Status: "PrinterError: Battery Low - Slot 2" *Status: "PrinterError: Non-Download Font Card Installed - Slot 1" *Status: "PrinterError: Non-Download Font Card Installed - Slot 2" *Status: "PrinterError: Write-Protect Switch in Protect Position - Slot 1" *Status: "PrinterError: Write-Protect Switch in Protect Position - Slot 2" *Status: "PrinterError: Defective or Unprogrammed Card Installed - Slot 1" *Status: "PrinterError: Defective or Unprogrammed Card Installed - Slot 2" *Status: "PrinterError: Defective Font Card Installed - Slot 1" *Status: "PrinterError: Defective Font Card Installed - Slot 2" *Status: "PrinterError: Unsupported Card Installed - Slot 1" *Status: "PrinterError: Unsupported Card Installed - Slot 2" *Status: "PrinterError: Printer Busy" *Status: "PrinterError: Printer Error" *% Input Sources (format: %% status: ; source: %% ) *Source: "serial9" *Source: "serial25" *Source: "Centronics" *% Printer Error (format: %% PrinterError: %%) *PrinterError: "Printer Offline" *PrinterError: "Paper Out or Feed Failure - Tray 1" *PrinterError: "Paper Out or Feed Failure - Tray 2" *PrinterError: "Paper Out or Feed Failure - Envelope Feeder" *PrinterError: "Load Paper Requested" *PrinterError: "Load Envelope Requested" *PrinterError: "Invalid Manual Insertion" *PrinterError: "Wrong Paper Length" *PrinterError: "Paper Jam" *PrinterError: "Cover Open/Cartridge Not Installed" *PrinterError: "Output Bin Full" *PrinterError: "Default Storage Error" *PrinterError: "Battery Low - Slot 1" *PrinterError: "Battery Low - Slot 2" *PrinterError: "Non-Download Font Card Installed - Slot 1" *PrinterError: "Non-Download Font Card Installed - Slot 2" *PrinterError: "Write-Protect Switch in Protect Position - Slot 1" *PrinterError: "Write-Protect Switch in Protect Position - Slot 2" *PrinterError: "Defective or Unprogrammed Card Installed - Slot 1" *PrinterError: "Defective or Unprogrammed Card Installed - Slot 2" *PrinterError: "Defective Font Card Installed - Slot 1" *PrinterError: "Defective Font Card Installed - Slot 2" *PrinterError: "Unsupported Card Installed - Slot 1" *PrinterError: "Unsupported Card Installed - Slot 2" *PrinterError: "Printer Busy" *PrinterError: "Printer Error" *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 60 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45" *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15" *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75" *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0" *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60" *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60" *% For 53 lpi / 300 dpi =============================== *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033" *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342" *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0" *% For "UNISYS AP9210" version 52.1 *% Produced by "BuildPPD.ps" version 3.0 edit 58 *% Converted to meet 4.0 specification *% Last Edit Date: Sep 15 1992 *% The byte count of this file should be exactly 014947 or 015367 *% depending on the filesystem it resides in. *% end of PPD file for UNISYS AP9210 Laser Printer