*PPD-Adobe: "4.0" *% Adobe Systems PostScript(R) Printer Description File *% Copyright 1987-1992 Adobe Systems Incorporated. *% All Rights Reserved. *% Permission is granted for redistribution of this file as *% long as this copyright notice is intact and the contents *% of the file is not altered in any way from its original form. *% End of Copyright statement *FormatVersion: "4.0" *FileVersion: "3.1" *PCFileName: "VT42P522.PPD" *LanguageVersion: English *Product: "(Varityper)" *PSVersion: "(49.3) 3.6" *PSVersion: "(52.2) 3.6" *ModelName: "Varityper 4200B-P" *NickName: "Varityper 4200B-P v49.3 or 52.2" *% General Information and Defaults =============== *FreeVM: "2428526" *LanguageLevel: "1" *Extensions: FileSystem CMYK *ColorDevice: False *DefaultColorSpace: Gray *VariablePaperSize: True *FileSystem: True *?FileSystem: " save statusdict /diskstatus get exec exch pop 0 eq {(False)}{(True)}ifelse = flush restore " *End *Throughput: "1" *Password: "0" *ExitServer: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot perform the exitserver command.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec " *End *Reset: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot reset printer.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec systemdict /quit get exec (WARNING : Printer Reset Failed.) = flush " *End *SetResolution 1800dpi: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot set the resolution.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec 1800 statusdict /setresolution get exec " *End *SetResolution 900dpi: " count 0 eq { % is the password on the stack? true }{ dup % potential password statusdict /checkpassword get exec not } ifelse { % if no password or not valid (WARNING : Cannot set the resolution.) = (Password supplied is not valid.) = (Please contact the author of this software.) = flush quit } if serverdict /exitserver get exec 900 statusdict /setresolution get exec " *End *?Resolution: " save initgraphics 0 0 moveto currentpoint matrix defaultmatrix transform 0 72 lineto currentpoint matrix defaultmatrix transform 3 -1 roll sub dup mul 3 1 roll exch sub dup mul add sqrt round cvi ( ) cvs print (dpi) = flush restore " *End *% Halftone Information =============== *ScreenFreq: "106.0" *ScreenAngle: "45.0" *DefaultScreenProc: Dot *ScreenProc Dot: " {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1 sub }{dup mul exch dup mul add 1 exch sub }ifelse } " *End *ScreenProc Line: "{ pop }" *ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }" *DefaultTransfer: Null *Transfer Null: "{ }" *Transfer Null.Inverse: "{ 1 exch sub }" *% Paper Handling =================== *% Use these entries to set paper size most of the time, unless there is *% specific reason to use PageRegion. *OpenUI *PageSize: PickOne *OrderDependency: 30 AnySetup *PageSize *DefaultPageSize: Letter *PageSize Letter: "letter" *PageSize Legal: "legal" *PageSize Ledger: "ledger" *PageSize Tabloid: "11x17" *PageSize A3: "a3" *PageSize A4: "a4" *PageSize A5: "a5" *PageSize ISOB5: "b5" *PageSize Letter.Transverse: "Letter" *PageSize A4.Transverse: "A4" *PageSize A5.Transverse: "A5" *PageSize ISOB5.Transverse: "B5" *?PageSize: " save mark statusdict /pageparams get exec exch pop 5 dict dup [595 420] (A5.Transverse) put dup [709 499] (ISOB5.Transverse) put dup [842 595] (A4.Transverse) put dup [792 612] (Letter.Transverse) put dup [1224 792] (Ledger) put 7 dict dup [420 595] (A5) put dup [499 709] (ISOB5) put dup [612 792] (Letter) put dup [595 842] (A4) put dup [612 1008] (Legal) put dup [842 1191] (A3) put dup [792 1224] (Tabloid) put 3 -1 roll 0 eq { pop } { exch pop }ifelse (Unknown) exch { exch aload pop 4 index eq exch 5 index eq and { exch pop exit } { pop } ifelse } bind forall = flush cleartomark restore " *End *CloseUI: *PageSize *% These entries will set up the frame buffer. Usually used with manual feed. *OpenUI *PageRegion: PickOne *OrderDependency: 40 AnySetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter: "letter" *PageRegion Legal: "legal" *PageRegion Ledger: "ledger" *PageRegion Tabloid: "11x17" *PageRegion A3: "a3" *PageRegion A4: "a4" *PageRegion A5: "a5" *PageRegion ISOB5: "b5" *PageRegion Letter.Transverse: "Letter" *PageRegion A4.Transverse: "A4" *PageRegion A5.Transverse: "A5" *PageRegion ISOB5.Transverse: "B5" *CloseUI: *PageRegion *% The following entries provide information about specific paper keywords. *DefaultImageableArea: Letter *ImageableArea Letter: "0 1 612 792 " *ImageableArea Legal: "0 1 612 1008 " *ImageableArea Ledger: "0 0 1223 792 " *ImageableArea Tabloid: "0 1 792 1224 " *ImageableArea A3: "0 1 842 1191 " *ImageableArea A4: "0 1 595 842 " *ImageableArea A5: "0 1 420 595 " *ImageableArea ISOB5: "0 1 499 709 " *ImageableArea Letter.Transverse: "0 0 611 792 " *ImageableArea A4.Transverse: "0 0 594 842 " *ImageableArea A5.Transverse: "0 0 419 595 " *ImageableArea ISOB5.Transverse: "0 0 498 710 " *?ImageableArea: " save /cvp {( ) cvs print ( ) print } bind def /upperright {10000 mul floor 10000 div} bind def /lowerleft {10000 mul ceiling 10000 div} bind def newpath clippath pathbbox 4 -2 roll exch 2 {lowerleft cvp} repeat exch 2 {upperright cvp} repeat flush restore " *End *% These provide the physical dimensions of the paper (by keyword) *DefaultPaperDimension: Letter *PaperDimension Letter: "612 792" *PaperDimension Legal: "612 1008" *PaperDimension Ledger: "1224 792" *PaperDimension Tabloid: "792 1224" *PaperDimension A3: "842 1191" *PaperDimension A4: "595 842" *PaperDimension A5: "420 595" *PaperDimension ISOB5: "499 709" *PaperDimension Letter.Transverse: "612 792" *PaperDimension A4.Transverse: "595 842" *PaperDimension A5.Transverse: "420 595" *PaperDimension ISOB5.Transverse: "499 709" *RequiresPageRegion All: True *OpenUI *InputSlot: PickOne *OrderDependency: 20 AnySetup *InputSlot *DefaultInputSlot: Cassette *InputSlot Cassette: "" *CloseUI: *InputSlot *DefaultOutputOrder: Normal *% Font Information ===================== *DefaultFont: Courier *Font Courier: Standard "(001.004)" Standard ROM *Font Courier-Bold: Standard "(001.004)" Standard ROM *Font Courier-BoldOblique: Standard "(001.004)" Standard ROM *Font Courier-Oblique: Standard "(001.004)" Standard ROM *Font Symbol: Special "(001.003)" Special ROM *?FontQuery: " save /str 100 string dup 0 (fonts/) putinterval def { count 1 gt { exch dup str 6 94 getinterval cvs (/) print dup print (:) print exch FontDirectory exch known { pop (Yes) } { length 6 add str 0 3 -1 roll getinterval mark exch status {cleartomark (Yes)}{cleartomark (No)} ifelse } ifelse = } {exit} ifelse }bind loop (*) = flush restore " *End *?FontList: " save FontDirectory { pop == } bind forall flush /filenameforall where { pop (fonts/*) { dup length 6 sub 6 exch getinterval cvn == } bind 128 string filenameforall flush } if (*) = flush restore " *End *% Printer Messages (verbatim from printer): *Message: "%%[ exitserver: permanent state may be changed ]%%" *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%" *Message: "\FontName\ not found, using Courier" *% Status (format: %%[ status: ]%% ) *Status: "idle" *Status: "busy" *Status: "waiting" *Status: "printing" *Status: "warming up" *Status: "PrinterError: Printer OK" *Status: "PrinterError: Printer never accepted band" *Status: "PrinterError: Printer Intensity Invalid" *Status: "PrinterError: PrintXferBusy for too long" *Status: "PrinterError: Printer not ready to write:unused" *Status: "PrinterError: Fifo transfer took too long:DMABusy still" *Status: "PrinterError: Printer Resolution Invalid" *Status: "PrinterError: Failed printerstart:!BEG" *Status: "PrinterError: Fifo transfer did not start:DMABusy still" *Status: "PrinterError: Printer Hardware Error" *Status: "PrinterError: Printer Disk Full" *Status: "PrinterError: Printer Media Cassette Full" *Status: "PrinterError: Printer No Takeup" *Status: "PrinterError: Re-transmitting Page To Printer" *Status: "PrinterError: Printer Line Length Invalid" *Status: "PrinterError: Printer Busy with Previous Page" *Status: "PrinterError: Default page being defined is too big" *Status: "PrinterError: Printer Media Value Invalid" *Status: "PrinterError: Printer Cover Open" *Status: "PrinterError: Printer never was ready to start band:!STA" *Status: "PrinterError: Printer not ready;printer needs attention" *Status: "PrinterError: Printer Paper Out" *Status: "PrinterError: Printer Disk Error" *Status: "PrinterError: Program Load Error" *Status: "PrinterError: Printer Leading Value Invalid" *Status: "PrinterError: Printer Offline" *% Input Sources (format: %%[ status: ; source: ]%% ) *Source: "serial9" *Source: "serial25" *Source: "AppleTalk" *Source: "Centronics" *% Printer Error (format: %%[ PrinterError: ]%%) *PrinterError: "Printer OK" *PrinterError: "Printer never accepted band" *PrinterError: "Printer Intensity Invalid" *PrinterError: "PrintXferBusy for too long" *PrinterError: "Printer not ready to write:unused" *PrinterError: "Fifo transfer took too long:DMABusy still" *PrinterError: "Printer Resolution Invalid" *PrinterError: "Failed printerstart:!BEG" *PrinterError: "Fifo transfer did not start:DMABusy still" *PrinterError: "Printer Hardware Error" *PrinterError: "Printer Disk Full" *PrinterError: "Printer Media Cassette Full" *PrinterError: "Printer No Takeup" *PrinterError: "Re-transmitting Page To Printer" *PrinterError: "Printer Line Length Invalid" *PrinterError: "Printer Busy with Previous Page" *PrinterError: "Default page being defined is too big" *PrinterError: "Printer Media Value Invalid" *PrinterError: "Printer Cover Open" *PrinterError: "Printer never was ready to start band:!STA" *PrinterError: "Printer not ready;printer needs attention" *PrinterError: "Printer Paper Out" *PrinterError: "Printer Disk Error" *PrinterError: "Program Load Error" *PrinterError: "Printer Leading Value Invalid" *PrinterError: "Printer Offline" *%DeviceAdjustMatrix: "[1 0 0 1 0 0]" *% Color Separation Information ===================== *DefaultColorSep: ProcessBlack.127lpi.1800dpi/127 lpi / 1800 dpi *InkName: ProcessBlack/Process Black *InkName: CustomColor/Custom Color *InkName: ProcessCyan/Process Cyan *InkName: ProcessMagenta/Process Magenta *InkName: ProcessYellow/Process Yellow *% For 127 lpi / 1800 dpi =============================== *ColorSepScreenAngle ProcessBlack.127lpi.1800dpi/127 lpi / 1800 dpi: "45.0" *ColorSepScreenAngle CustomColor.127lpi.1800dpi/127 lpi / 1800 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.127lpi.1800dpi/127 lpi / 1800 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.127lpi.1800dpi/127 lpi / 1800 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.127lpi.1800dpi/127 lpi / 1800 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.127lpi.1800dpi/127 lpi / 1800 dpi: "127.279" *ColorSepScreenFreq CustomColor.127lpi.1800dpi/127 lpi / 1800 dpi: "127.279" *ColorSepScreenFreq ProcessCyan.127lpi.1800dpi/127 lpi / 1800 dpi: "113.842" *ColorSepScreenFreq ProcessMagenta.127lpi.1800dpi/127 lpi / 1800 dpi: "113.842" *ColorSepScreenFreq ProcessYellow.127lpi.1800dpi/127 lpi / 1800 dpi: "120.0" *% For 106 lpi / 1800 dpi =============================== *ColorSepScreenAngle ProcessBlack.106lpi.1800dpi/106 lpi / 1800 dpi: "45.0" *ColorSepScreenAngle CustomColor.106lpi.1800dpi/106 lpi / 1800 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.106lpi.1800dpi/106 lpi / 1800 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.106lpi.1800dpi/106 lpi / 1800 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.106lpi.1800dpi/106 lpi / 1800 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.106lpi.1800dpi/106 lpi / 1800 dpi: "106.066" *ColorSepScreenFreq CustomColor.106lpi.1800dpi/106 lpi / 1800 dpi: "106.066" *ColorSepScreenFreq ProcessCyan.106lpi.1800dpi/106 lpi / 1800 dpi: "94.8683" *ColorSepScreenFreq ProcessMagenta.106lpi.1800dpi/106 lpi / 1800 dpi: "94.8683" *ColorSepScreenFreq ProcessYellow.106lpi.1800dpi/106 lpi / 1800 dpi: "100.0" *% For 91 lpi / 1800 dpi =============================== *ColorSepScreenAngle ProcessBlack.91lpi.1800dpi/91 lpi / 1800 dpi: "45.0" *ColorSepScreenAngle CustomColor.91lpi.1800dpi/91 lpi / 1800 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.91lpi.1800dpi/91 lpi / 1800 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.91lpi.1800dpi/91 lpi / 1800 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.91lpi.1800dpi/91 lpi / 1800 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.91lpi.1800dpi/91 lpi / 1800 dpi: "90.9137" *ColorSepScreenFreq CustomColor.91lpi.1800dpi/91 lpi / 1800 dpi: "90.9137" *ColorSepScreenFreq ProcessCyan.91lpi.1800dpi/91 lpi / 1800 dpi: "81.3157" *ColorSepScreenFreq ProcessMagenta.91lpi.1800dpi/91 lpi / 1800 dpi: "81.3157" *ColorSepScreenFreq ProcessYellow.91lpi.1800dpi/91 lpi / 1800 dpi: "85.7143" *% For 106 lpi / 900 dpi ===================================================== *ColorSepScreenAngle ProcessBlack.106lpi.900dpi/106 lpi / 900 dpi: "45.0" *ColorSepScreenAngle CustomColor.106lpi.900dpi/106 lpi / 900 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.106lpi.900dpi/106 lpi / 900 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.106lpi.900dpi/106 lpi / 900 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.106lpi.900dpi/106 lpi / 900 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.106lpi.900dpi/106 lpi / 900 dpi: "106.066" *ColorSepScreenFreq CustomColor.106lpi.900dpi/106 lpi / 900 dpi: "106.066" *ColorSepScreenFreq ProcessCyan.106lpi.900dpi/106 lpi / 900 dpi: "94.8683" *ColorSepScreenFreq ProcessMagenta.106lpi.900dpi/106 lpi / 900 dpi: "94.8683" *ColorSepScreenFreq ProcessYellow.106lpi.900dpi/106 lpi / 900 dpi: "100.0" *% For 80 lpi / 900 dpi ===================================================== *ColorSepScreenAngle ProcessBlack.80lpi.900dpi/80 lpi / 900 dpi: "45.0" *ColorSepScreenAngle CustomColor.80lpi.900dpi/80 lpi / 900 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.80lpi.900dpi/80 lpi / 900 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.80lpi.900dpi/80 lpi / 900 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.80lpi.900dpi/80 lpi / 900 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.80lpi.900dpi/80 lpi / 900 dpi: "79.5495" *ColorSepScreenFreq CustomColor.80lpi.900dpi/80 lpi / 900 dpi: "79.5495" *ColorSepScreenFreq ProcessCyan.80lpi.900dpi/80 lpi / 900 dpi: "71.1512" *ColorSepScreenFreq ProcessMagenta.80lpi.900dpi/80 lpi / 900 dpi: "71.1512" *ColorSepScreenFreq ProcessYellow.80lpi.900dpi/80 lpi / 900 dpi: "75.0" *% For 64 lpi / 900 dpi ===================================================== *ColorSepScreenAngle ProcessBlack.64lpi.900dpi/64 lpi / 900 dpi: "45.0" *ColorSepScreenAngle CustomColor.64lpi.900dpi/64 lpi / 900 dpi: "45.0" *ColorSepScreenAngle ProcessCyan.64lpi.900dpi/64 lpi / 900 dpi: "71.5651" *ColorSepScreenAngle ProcessMagenta.64lpi.900dpi/64 lpi / 900 dpi: "18.4349" *ColorSepScreenAngle ProcessYellow.64lpi.900dpi/64 lpi / 900 dpi: "0.0" *ColorSepScreenFreq ProcessBlack.64lpi.900dpi/64 lpi / 900 dpi: "63.6396" *ColorSepScreenFreq CustomColor.64lpi.900dpi/64 lpi / 900 dpi: "63.6396" *ColorSepScreenFreq ProcessCyan.64lpi.900dpi/64 lpi / 900 dpi: "56.921" *ColorSepScreenFreq ProcessMagenta.64lpi.900dpi/64 lpi / 900 dpi: "56.921" *ColorSepScreenFreq ProcessYellow.64lpi.900dpi/64 lpi / 900 dpi: "60.0" *% For "4200B-P" version 49.3 AND 52.2 *% Produced by "BuildPPD.ps" version 3.0 edit 58 *% Converted to meet 4.0 specification *% Last Edit Date: Sep 15 1992 *% The byte count of this file should be exactly 016636 or 017102 *% depending on the filesystem it resides in. *% end of PPD file for Varityper 4200B-P