;/*++
;
;Copyright (c) 1991-2001  Microsoft Corporation
;
;Module Name:
;
;    clusvmsg.h
;
;Abstract:
;
;    This file contains the message definitions for the Cluster service.
;
;Author:
;
;    Mike Massa (mikemas) 2-Jan-1996
;
;Revision History:
;
;Notes:
;
;    This file is generated from clusvmsg.mc
;
;    How to add a new error log category: By convention, error log categories 
;    start at 1 and increase monotonically. Start by adding a category
;    identifier to the end of the list. Next, set LOG_CURRENT_MODULE in your
;    source code to the symbolic name of the new category, e.g.:
;
;    #define LOG_CURRENT_MODULE LOG_MODULE_XYZ
;
;    The cluster event log macros will substitute your category ID
;    appropriately.
;
;    Finally, modify the CategoryCount entry in
;    cluster\mgmt\cluscfg\basecluster\clcfgsrv.inf and
;    cluster\mgmt\clusocm\clusocm.inf to the new total.
;
;--*/
;
;#ifndef _CLUSVMSG_INCLUDED
;#define _CLUSVMSG_INCLUDED
;
;

MessageID=1 SymbolicName=LOG_MODULE_API
Language=English
API
.

MessageID=2 SymbolicName=LOG_MODULE_EP
Language=English
Event Processor
.

MessageID=3 SymbolicName=LOG_MODULE_FM
Language=English
Failover Mgr
.

MessageID=4 SymbolicName=LOG_MODULE_OM
Language=English
Object Mgr
.

MessageID=5 SymbolicName=LOG_MODULE_NM
Language=English
Node Mgr
.

MessageID=6 SymbolicName=LOG_MODULE_GUM
Language=English
Global Update Mgr
.

MessageID=7 SymbolicName=LOG_MODULE_CP
Language=English
Checkpoint Mgr
.

MessageID=8 SymbolicName=LOG_MODULE_INIT
Language=English
Startup/Shutdown
.

MessageID=9 SymbolicName=LOG_MODULE_DM
Language=English
Database Mgr
.

MessageID=10 SymbolicName=LOG_MODULE_MM
Language=English
Membership Mgr
.

MessageID=11 SymbolicName=LOG_MODULE_RESMON
Language=English
Resource Monitor
.

MessageID=12 SymbolicName=LOG_MODULE_LM
Language=English
Log Mgr
.

MessageID=13 SymbolicName=LOG_MODULE_EVTLOG
Language=English
Event Logger
.

MessageID=14 SymbolicName=LOG_MODULE_CLRTL
Language=English
RTL
.

MessageID=15 SymbolicName=LOG_MODULE_GENAPP
Language=English
Generic App Resource
.

MessageID=16 SymbolicName=LOG_MODULE_GENSVC
Language=English
Generic Service Resource
.

MessageID=17 SymbolicName=LOG_MODULE_FTSET
Language=English
FTSETs
.

MessageID=18 SymbolicName=LOG_MODULE_DISK
Language=English
Physical Disk Resource
.

MessageID=19 SymbolicName=LOG_MODULE_NETNAME
Language=English
Network Name Resource
.

MessageID=20 SymbolicName=LOG_MODULE_IPADDR
Language=English
IP Address Resource
.

MessageID=21 SymbolicName=LOG_MODULE_SMB
Language=English
File Share Resource
.

MessageID=22 SymbolicName=LOG_MODULE_TIME
Language=English
Time Service Resource
.

MessageID=23 SymbolicName=LOG_MODULE_SPOOL
Language=English
Print Spooler Resource
.

MessageID=24 SymbolicName=LOG_MODULE_LKQRM
Language=English
Local Quorum Resource
.

MessageID=25 SymbolicName=LOG_MODULE_DHCP
Language=English
DHCP Resource
.

MessageID=26 SymbolicName=LOG_MODULE_MSMQ
Language=English
MS Message Queue Resource
.

MessageID=27 SymbolicName=LOG_MODULE_MSDTC
Language=English
MS Distributed Trans. Co-ord. Resource
.

MessageID=28 SymbolicName=LOG_MODULE_WINS
Language=English
WINS Resource
.

MessageID=29 SymbolicName=LOG_MODULE_VSSCLUS
Language=English
Volume Snapshot Service support
.

MessageID=30 SymbolicName=LOG_MODULE_GENSCRIPT
Language=English
Generic Script Resource
.

;//
;// end of Error Log Categories
;//
;

MessageID=1000 SymbolicName=UNEXPECTED_FATAL_ERROR
Language=English
Cluster service suffered an unexpected fatal error
at line %1 of source module %2. The error code was %3.
.

MessageID=1001 SymbolicName=ASSERTION_FAILURE
Language=English
Cluster service failed a validity check on line
%1 of source module %2.
"%3"
.

MessageID=1002 SymbolicName=LOG_FAILURE
Language=English
Cluster service handled an unexpected error
at line %1 of source module %2. The error code was %3.
.

;
;//
;// DON'T USE MSG IDS 1003, 1004, OR 1005. ClRtlMsgPrint didn't log into the
;// the cluster log. These msgs were intended for the cluster log and don't
;// belong in the system event log. However, they need to be left here in order
;// to interpret any old clussvc event entries.
;//
;
MessageID=1003 SymbolicName=INVALID_RESOURCETYPE_DLLNAME
Language=English
The DllName value for the %1!ws! resource type does not exist.
Resources of this type will not be monitored. The error was %2!d!.
.

MessageID=1004 SymbolicName=INVALID_RESOURCETYPE_LOOKSALIVE
Language=English
The LooksAlive poll interval for the %1!ws! resource type does not exist.
Resources of this type will not be monitored. The error was %2!d!.
.

MessageID=1005 SymbolicName=INVALID_RESOURCETYPE_ISALIVE
Language=English
The IsAlive poll interval for the %1!ws! resource type does not exist.
Resources of this type will not be monitored. The error was %2!d!.
.

MessageID=1006 SymbolicName=NM_EVENT_MEMBERSHIP_HALT
Language=English
Cluster service was halted due to a server cluster membership or
communications error. The error code was %1.
.

MessageID=1007 SymbolicName=NM_EVENT_NEW_NODE
Language=English
A new node, %1, has been added to the server cluster.
.

MessageID=1008 SymbolicName=RMON_INVALID_COMMAND_LINE
Language=English
Cluster Resource Monitor was started with an invalid command line
option: %1.
.

MessageID=1009 SymbolicName=SERVICE_FAILED_JOIN_OR_FORM
Language=English
Cluster service could not join an existing server cluster and could not
form a new server cluster. Cluster service has terminated.
.

MessageID=1010 SymbolicName=SERVICE_FAILED_NOT_MEMBER
Language=English
Cluster service is shutting down because the current node is not a
member of any server cluster. Cluster service must be reinstalled to make
this node a member of a server cluster.
.

MessageID=1011 SymbolicName=NM_NODE_EVICTED
Language=English
Cluster node %1 has been evicted from the server cluster.
.

MessageID=1012 SymbolicName=SERVICE_FAILED_INVALID_OS
Language=English
Cluster service did not start because the current version of Windows
is not correct. Cluster service runs only on Windows Server 2003
Enterprise Edition and Windows Server 2003 Datacenter Edition.
.

MessageID=1013 SymbolicName=DM_CHKPOINT_UPLOADFAILED
Language=English
The quorum log checkpoint could not be restored to the server cluster database.
There may be open handles to the server cluster database that prevent this operation
from succeeding.
.

MessageID=1014 SymbolicName=CS_COMMAND_LINE_HELP
Language=English
To start Cluster service, in Control Panel, double-click Administrative Tools,
then double-click Services. Or, at the command prompt, type:
%nnet start clussvc.
.

MessageID=1015 SymbolicName=LM_LOG_CHKPOINT_NOT_FOUND
Language=English
No checkpoint record was found in the log file %1. The checkpoint file is
invalid or was deleted.
.

MessageID=1016 SymbolicName=LM_CHKPOINT_GETFAILED
Language=English
Cluster service failed to obtain a checkpoint from the server cluster
database for log file %1.
.

MessageID=1017 SymbolicName=LM_LOG_EXCEEDS_MAXSIZE
Language=English
The log file %1 exceeds its maximum size. An attempt will be made to reset
the log, or you should use the Cluster Administrator utility to adjust the maximum
size.
.

MessageID=1019 SymbolicName=LM_LOG_CORRUPT
Language=English
The log file %1 was found to be corrupt.  An attempt will be made to reset
it, or you should use the Cluster Administrator utility to adjust the maximum
size.
.

MessageID=1021 SymbolicName=LM_DISKSPACE_LOW_WATERMARK
Language=English
There is insufficient disk space remaining on the quorum device. Please
increase the amount of free space on the quorum device. Changes to the server cluster
registry will not be made if there is insufficient free space on the disk for
the quorum log files.
.

MessageID=1022 SymbolicName=LM_DISKSPACE_HIGH_WATERMARK
Language=English
There is insufficient space left on the quorum device. Cluster
Service cannot start.
.

MessageID=1023 SymbolicName=FM_QUORUM_RESOURCE_NOT_FOUND
Language=English
The quorum resource was not found. Cluster service has
terminated.
.

MessageID=1024 SymbolicName=CP_REG_CKPT_RESTORE_FAILED
Language=English
The registry checkpoint for Cluster resource %1 could not be restored to
registry key HKEY_LOCAL_MACHINE\%2. The resource may not function correctly.
Make sure that no other processes have open handles to registry keys in this
registry subtree.
.

MessageID=1025 SymbolicName=RES_FTSET_DISK_ERROR
Language=English
Cluster FT set DISK registry information is corrupt.
.

MessageID=1026 SymbolicName=RES_FTSET_MEMBER_MOUNT_FAILED
Language=English
Cluster FT set '%1' could not be mounted.
.

MessageID=1027 SymbolicName=RES_FTSET_MEMBER_MISSING
Language=English
Cluster FT set '%1' could not attach to the member with disk signature %2.
.

MessageID=1028 SymbolicName=RES_FTSET_TOO_MANY_MISSING_MEMBERS
Language=English
Cluster FT set '%1' has too many missing members to continue operation.
.

MessageID=1029 SymbolicName=RES_FTSET_FILESYSTEM_FAILED
Language=English
Cluster FT set '%1' has failed a file system check.
.

MessageID=1030 SymbolicName=RES_FTSET_ALL_MEMBERS_INACCESSIBLE
Language=English
No members of cluster FT set '%1' are responding to I/O requests.
.

MessageID=1031 SymbolicName=RES_FTSET_RESERVATION_LOST
Language=English
Reservation of cluster FT set '%1' has been lost.
.

MessageID=1032 SymbolicName=RES_FTSET_MEMBER_REMOVED
Language=English
Disk member %2 has been removed from cluster FT set '%1'.
.

MessageID=1033 SymbolicName=RES_FTSET_MEMBER_ADDED
Language=English
Disk member %2 has been added to cluster FT set '%1'.
.

MessageID=1034 SymbolicName=RES_DISK_MISSING
Language=English
The disk associated with cluster disk resource '%1' could not be found.
The expected signature of the disk was %2. If the disk was removed from
the server cluster, the resource should be deleted. If the disk was replaced,
the resource must be deleted and created again in order to bring the disk
online. If the disk has not been removed or replaced, it may be inaccessible
at this time because it is reserved by another server cluster node.
.

MessageID=1035 SymbolicName=RES_DISK_MOUNT_FAILED
Language=English
Cluster disk resource '%1' could not be mounted.
.

MessageID=1036 SymbolicName=RES_DISK_FAILED_SCSI_CHECK
Language=English
Cluster disk resource '%1' did not respond to a SCSI maintenance command.
.

MessageID=1037 SymbolicName=RES_DISK_FILESYSTEM_FAILED
Language=English
Cluster disk resource '%1' has failed a file system check. Please check your
disk configuration.
.

MessageID=1038 SymbolicName=RES_DISK_RESERVATION_LOST
Language=English
Reservation of cluster disk '%1' has been lost. Please check your system and
disk configuration.
.

MessageID=1039 SymbolicName=RES_GENAPP_CREATE_FAILED
Language=English
Cluster generic application '%1' could not be created.
.

MessageID=1040 SymbolicName=RES_GENSVC_OPEN_FAILED
Language=English
Cluster generic service '%1' could not be found.
.

MessageID=1041 SymbolicName=RES_GENSVC_START_FAILED
Language=English
Cluster generic service '%1' could not be started.
.

MessageID=1042 SymbolicName=RES_GENSVC_FAILED_AFTER_START
Language=English
Cluster generic service '%1' failed.
.

MessageID=1043 SymbolicName=RES_IPADDR_NBT_INTERFACE_FAILED
Language=English
The NetBios interface for cluster IP Address resource '%1' has failed.
.

MessageID=1044 SymbolicName=RES_IPADDR_NBT_INTERFACE_CREATE_FAILED
Language=English
Cluster IP Address resource '%1' could not create the required NetBios
interface.
.

MessageID=1045 SymbolicName=RES_IPADDR_NTE_CREATE_FAILED
Language=English
Cluster IP Address resource '%1' could not create the required TCP/IP
interface.
.

MessageID=1046 SymbolicName=RES_IPADDR_INVALID_SUBNET
Language=English
Cluster IP Address resource '%1' cannot be brought online because the
subnet mask parameter is invalid. Please check your network configuration.
.

MessageID=1047 SymbolicName=RES_IPADDR_INVALID_ADDRESS
Language=English
Cluster IP Address resource '%1' cannot be brought online because the
Address parameter is invalid. Please check your network configuration.
.

MessageID=1048 SymbolicName=RES_IPADDR_INVALID_ADAPTER
Language=English
Cluster IP Address resource '%1' cannot be brought online because the
adapter name parameter is invalid. Please check your network configuration.
.

MessageID=1049 SymbolicName=RES_IPADDR_IN_USE
Language=English
Cluster IP Address resource '%1' cannot be brought online because address
%2 is already present on the network. Please check your network configuration.
.

MessageID=1050 SymbolicName=RES_NETNAME_DUPLICATE
Language=English
Cluster Network Name resource '%1' cannot be brought online because the name
%2 is already present on the network. Please check your network configuration.
.

MessageID=1051 SymbolicName=RES_NETNAME_NO_IP_ADDRESS
Language=English
Cluster Network Name resource '%1' cannot be brought online because it is
either configured to have no associated name service or it could not be
registered with NetBIOS and a DNS name server at this time. This prevents the
name from being brought online.%n
%nOne or more dependent IP address resource(s) must have either the
enableNetBIOS property enabled or its network adapter must have at least one
DNS server associated with it.
.

MessageID=1052 SymbolicName=RES_NETNAME_CANT_ADD_NAME_STATUS
Language=English
Cluster Network Name resource '%1' cannot be brought online because the name
could not be added to the system. The associated error code is stored in the
data section.
.

MessageID=1053 SymbolicName=RES_SMB_CANT_CREATE_SHARE
Language=English
Cluster File Share '%1' cannot be brought online because the share
could not be created.
.

MessageID=1054 SymbolicName=RES_SMB_SHARE_NOT_FOUND
Language=English
Cluster File Share '%1' could not be found.
.

MessageID=1055 SymbolicName=RES_SMB_SHARE_FAILED
Language=English
Cluster File Share resource '%1' has failed a status check. The error code
is %2.
.

MessageID=1056 SymbolicName=SERVICE_MUST_JOIN
Language=English
the server cluster database on the local node is in an invalid state.
Please start another node before starting this node.
.

MessageID=1057 SymbolicName=DM_DATABASE_CORRUPT_OR_MISSING
Language=English
the server cluster database could not be loaded. The file CLUSDB is either
corrupt or missing.
.

MessageID=1058 SymbolicName=RMON_CANT_LOAD_RESTYPE
Language=English
The Cluster Resource Monitor could not load the DLL %1 for resource type %2.
.

MessageID=1059 SymbolicName=RMON_CANT_INIT_RESTYPE
Language=English
Cluster resource DLL %1 for resource type %2 failed to initialize.
.

MessageID=1060 SymbolicName=RMON_RESTYPE_BAD_TABLE
Language=English
Cluster resource DLL %1 for resource type %2 returned an invalid function
table.
.

MessageID=1061 SymbolicName=SERVICE_SUCCESSFUL_FORM
Language=English
Cluster service successfully formed the server cluster %1 on this node.
.

MessageID=1062 SymbolicName=SERVICE_SUCCESSFUL_JOIN
Language=English
Cluster service successfully joined the server cluster %1.
.

MessageID=1063 SymbolicName=SERVICE_SUCCESSFUL_TERMINATION
Language=English
Cluster service was successfully stopped.
.

MessageID=1064 SymbolicName=DM_TOMBSTONECREATE_FAILED
Language=English
The quorum resource was changed. The old quorum resource could
not be marked as obsolete. If there is partition in time, you may
lose changes to your database since the node that is down will not
be able to get to the new quorum resource.
.

MessageID=1065 SymbolicName=RMON_ONLINE_FAILED
Language=English
Cluster resource %1 failed to come online.
.

MessageID=1066 SymbolicName=RES_DISK_CORRUPT_DISK
Language=English
Cluster disk resource "%1" is corrupt. Run 'ChkDsk /F' to repair problems.
The volume name for this resource is "%2".%n
If available, ChkDsk output will be in the file "%3".%n
ChkDsk may write information to the Application Event Log with Event ID 26180.
.

MessageID=1067 SymbolicName=RES_DISK_CORRUPT_FILE
Language=English
Cluster disk resource "%1" has corrupt files. Run ChkDsk /F to repair
problems.%n
The volume name for this resource is "%2".%n
If available, ChkDsk output will be in the file "%3".%n
ChkDsk may write information to the Application Event Log with Event ID 26180.
.

MessageID=1068 SymbolicName=RES_SMB_SHARE_CANT_ADD
Language=English
Cluster file share resource %1 failed to start with error %2.
.

MessageID=1069 SymbolicName=FM_RESOURCE_FAILURE
Language=English
Cluster resource '%1' in Resource Group '%2' failed.
.

MessageID=1070 SymbolicName=NM_EVENT_BEGIN_JOIN_FAILED
Language=English
The node failed to begin the process of joining the server cluster.
The error code was %1.
.

MessageID=1071 SymbolicName=NM_EVENT_JOIN_REFUSED
Language=English
Cluster node %1 attempted to join but was refused. The error code was %2.
.

MessageID=1072 SymbolicName=NM_INIT_FAILED
Language=English
Cluster service node initialization failed with error %1.
.

MessageID=1073 SymbolicName=CS_EVENT_INCONSISTENCY_HALT
Language=English
Cluster service was halted to prevent an inconsistency within the
server cluster. The error code was %1.
.

MessageID=1074 SymbolicName=NM_EVENT_EVICTION_ERROR
Language=English
An unrecoverable error occurred on node %1 while attempting to evict node %2
from the server cluster. The error code was %3.
.

MessageID=1075 SymbolicName=NM_EVENT_SET_NETWORK_PRIORITY_FAILED
Language=English
Cluster service failed to set the priority for cluster network %1.
The error code was %2. Communication between server cluster nodes may not operate as
configured.
.

MessageID=1076 SymbolicName=NM_EVENT_REGISTER_NETINTERFACE_FAILED
Language=English
Cluster service failed to register the interface for node '%1'
on network '%2' with the server cluster network provider. The error code was %3.
.

MessageID=1077 SymbolicName=RES_IPADDR_NTE_INTERFACE_FAILED
Language=English
The TCP/IP interface for Cluster IP Address '%1' has failed.
.

MessageID=1078 SymbolicName=RES_IPADDR_WINS_ADDRESS_FAILED
Language=English
Cluster IP Address '%1' failed to register WINS address on interface '%2'.
.

MessageID=1079 SymbolicName=NM_EVENT_NODE_UNREACHABLE
Language=English
The node cannot join the server cluster because it cannot communicate with
node %1 over any network configured for internal server cluster communication.
Check the network configuration of the node and the server cluster.
.

MessageID=1080 SymbolicName=CS_DISKWRITE_FAILURE
Language=English
Cluster service could not write to a file (%1). The disk may be low
on disk space, or some other serious condition exists.
.

MessageID=1081 SymbolicName=CP_SAVE_REGISTRY_FAILURE
Language=English
Cluster service failed to save the registry key %1 when a resource
was brought offline.  The error code was %2.  Some changes may be lost.
.

MessageID=1082 SymbolicName=CP_RESTORE_REGISTRY_FAILURE
Language=English
Cluster service failed to restore a registry key for resource %1 when it
was brought online. This error code was %2.  Some changes may be lost.
.

MessageID=1083 SymbolicName=NM_EVENT_WSASTARTUP_FAILED
Language=English
Cluster service failed to initialize the Windows Sockets interface.
The error code was %1. Please check the network configuration and system
installation.
.

MessageID=1084 SymbolicName=CS_EVENT_ALLOCATION_FAILURE
Language=English
Cluster service failed to allocate a necessary system resource.
The error code was %1.
.

MessageID=1085 SymbolicName=NM_EVENT_GETCOMPUTERNAME_FAILED
Language=English
Cluster service failed to determine the local computer name.
The error code was %1.
.

MessageID=1086 SymbolicName=NM_EVENT_CLUSNET_UNAVAILABLE
Language=English
Cluster service failed to access the Cluster Network driver.
The error code was %1. Please check Cluster service installation.
.

MessageID=1087 SymbolicName=NM_EVENT_CLUSNET_CALL_FAILED
Language=English
A required Cluster Network Driver operation failed. The error code was %1.
.

MessageID=1088 SymbolicName=CS_EVENT_REG_OPEN_FAILED
Language=English
Cluster service failed to open a registry key. The key name was %1.
The error code was %2.
.

MessageID=1089 SymbolicName=CS_EVENT_REG_QUERY_FAILED
Language=English
Cluster service failed to query a registry value. The value name
was %1. The error code was %2.
.

MessageID=1090 SymbolicName=CS_EVENT_REG_OPERATION_FAILED
Language=English
Cluster service failed to perform an operation on the registry.
The error code was %1.
.

MessageID=1091 SymbolicName=NM_EVENT_INVALID_CLUSNET_ENDPOINT
Language=English
The Cluster Network endpoint value, %1, specified in the registry is not
valid. The default value, %2, will be used.
.

MessageID=1092 SymbolicName=NM_EVENT_MM_FORM_FAILED
Language=English
Cluster service failed to form the server cluster membership.
The error code was %1
.

MessageID=1093 SymbolicName=NM_EVENT_NODE_NOT_MEMBER
Language=English
Node %1 is not a member of server cluster %2. If the name of
the node has changed, Cluster service must be reinstalled.
.

MessageID=1094 SymbolicName=NM_EVENT_CONFIG_SYNCH_FAILED
Language=English
Cluster service failed to obtain information from the server cluster
configuration database. The error code was %1.
.

MessageID=1095 SymbolicName=CLNET_EVENT_QUERY_CONFIG_FAILED
Language=English
Cluster service failed to obtain information about the network
configuration of the node. The error code was %1. Check that the
TCP/IP services are installed.
.

MessageID=1096 SymbolicName=CLNET_EVENT_INVALID_ADAPTER_ADDRESS
Language=English
Cluster service cannot use network adapter %1 because it does
not have a valid IP address assigned to it.
.

MessageID=1097 SymbolicName=CLNET_EVENT_NO_VALID_ADAPTER
Language=English
Cluster service did not find any network adapters with valid
IP addresses installed in the system. The node will not be able to join
a server cluster.
.

MessageID=1098 SymbolicName=CLNET_EVENT_DELETE_INTERFACE
Language=English
The node is no longer attached to cluster network '%1' by adapter %2.
Cluster service will delete network interface '%3' from the
server cluster configuration.
.

MessageID=1099 SymbolicName=CLNET_EVENT_DELETE_INTERFACE_FAILED
Language=English
Cluster service failed to delete an unused network interface
from the server cluster configuration. The error code was %1.
.

MessageID=1100 SymbolicName=CLNET_EVENT_CREATE_INTERFACE
Language=English
Cluster service discovered that the node is now
attached to cluster network '%1' by adapter %2. A new cluster network
interface will be added to the server cluster configuration.
.

MessageID=1101 SymbolicName=CLNET_EVENT_CREATE_INTERFACE_FAILED
Language=English
Cluster service failed to add a network interface to the
server cluster configuration. The error code was %1.
.

MessageID=1102 SymbolicName=CLNET_EVENT_CREATE_NETWORK
Language=English
Cluster service discovered that the node is attached to a new
network by adapter %1. A new network and a network interface will be added
to the server cluster configuration.
.

MessageID=1103 SymbolicName=CLNET_EVENT_CREATE_NETWORK_FAILED
Language=English
Cluster service failed to add a network to the server cluster configuration.
The error code was %1.
.

MessageID=1104 SymbolicName=CLNET_EVENT_UPDATE_INTERFACE_FAILED
Language=English
Cluster service failed to update the configuration for one of
the node's network interfaces. The error code was %1.
.

MessageID=1105 SymbolicName=CS_EVENT_RPC_INIT_FAILED
Language=English
Cluster service failed to initialize the RPC services.
The error code was %1.
.

MessageID=1106 SymbolicName=NM_EVENT_JOIN_BIND_OUT_FAILED
Language=English
The node failed to make a connection to cluster node %1 over network '%2'.
The error code was %3.
.

MessageID=1107 SymbolicName=NM_EVENT_JOIN_BIND_IN_FAILED
Language=English
Cluster node %1 failed to make a connection to the node over
network '%2'. The error code was %3.
.

MessageID=1108 SymbolicName=NM_EVENT_JOIN_TIMED_OUT
Language=English
The join of node %1 to the server cluster timed out and was aborted.
.

MessageID=1109 SymbolicName=NM_EVENT_CREATE_SECURITY_CONTEXT_FAILED
Language=English
The node was unable to secure its connection to cluster node %1. The error
code was %2. Check that all nodes in the server cluster can communicate with their
domain controllers.
.

MessageID=1110 SymbolicName=NM_EVENT_PETITION_FAILED
Language=English
The node failed to join the active server cluster membership. The error code
was %1.
.

MessageID=1111 SymbolicName=NM_EVENT_GENERAL_JOIN_ERROR
Language=English
An unrecoverable error occurred while the node was joining the server cluster.
The error code was %1.
.

MessageID=1112 SymbolicName=NM_EVENT_JOIN_ABORTED
Language=English
The node's attempt to join the server cluster was aborted by the sponsor node.
Check the event log of an active server cluster node for more information.
.

MessageID=1113 SymbolicName=NM_EVENT_JOIN_ABANDONED
Language=English
The node's attempt to join the server cluster was abandoned after too many failures.
.

MessageID=1114 SymbolicName=NM_EVENT_JOINER_BIND_FAILED
Language=English
The node failed to make a connection to joining node %1 over network %2.
The error code was %3.
.

MessageID=1115 SymbolicName=NM_EVENT_SPONSOR_JOIN_ABORTED
Language=English
An unrecoverable error caused the join of node %1 to the server cluster
to be aborted. The error code was %2.
.

MessageID=1116 SymbolicName=RES_NETNAME_NOT_REGISTERED
Language=English
Cluster Network Name '%1' could not be instantiated on its associated cluster
network. No DNS servers were available and all of the Network Name's dependent
IP Address resources do not have NetBIOS enabled.
.

MessageID=1117 SymbolicName=RMON_OFFLINE_FAILED
Language=English
Cluster resource %1 failed to come offline.
.

MessageID=1118 SymbolicName=CLNET_NODE_POISONED
Language=English
Cluster service was terminated as requested by Node %2.
.

MessageID=1119 SymbolicName=RES_NETNAME_DNS_REGISTRATION_MISSING
Language=English
The registration of DNS name %2 for resource '%1' over
adapter '%4' failed for the following reason:%n
%n%3
.

MessageID=1120 SymbolicName=RES_DISK_WRITING_TO_CLUSREG
Language=English
The DLL associated with cluster disk resource '%1' is attempting to change
the drive letter parameters from '%2' to '%3' in the server cluster database. If your
restore database operation failed, this could be caused by the replacement
of a quorum drive with a different partition layout from the original
quorum drive at the time the database backup was made. If this is the case
and you would like to use the new disk as the quorum drive, we suggest that
you stop the Cluster disk service, change the drive letter(s) of this drive to
'%2', start the Cluster disk service and retry the restore database procedure.
.

MessageID=1121 SymbolicName=CP_CRYPTO_CKPT_RESTORE_FAILED
Language=English
The crypto checkpoint for cluster resource '%1' could not be restored to
the container name '%2'. The resource may not function correctly.
.

MessageID=1122 SymbolicName=NM_EVENT_NETINTERFACE_UP
Language=English
The node (re)established communication with cluster node '%1' on network '%2'.
.

MessageID=1123 SymbolicName=NM_EVENT_NETINTERFACE_UNREACHABLE
Language=English
The node lost communication with cluster node '%1' on network '%2'.
.

MessageID=1124 SymbolicName=NM_EVENT_NETINTERFACE_FAILED
Language=English
The node determined that its interface to network '%1' failed.
.

MessageID=1125 SymbolicName=NM_EVENT_CLUSTER_NETINTERFACE_UP
Language=English
The interface for cluster node '%1' on network '%2' is operational (up).
The node can communicate with all other available cluster nodes on the
network.
.

MessageID=1126 SymbolicName=NM_EVENT_CLUSTER_NETINTERFACE_UNREACHABLE
Language=English
The interface for cluster node '%1' on network '%2' is unreachable by
at least one other cluster node attached to the network. the server cluster was
not able to determine the location of the failure. Look for additional
entries in the system event log indicating which other nodes
have lost communication with node %1. If the condition persists, check
the cable connecting the node to the network. Next, check for hardware or
software errors in the node's network adapter. Finally, check for failures
in any other network components to which the node is connected such as
hubs, switches, or bridges.
.

MessageID=1127 SymbolicName=NM_EVENT_CLUSTER_NETINTERFACE_FAILED
Language=English
The interface for cluster node '%1' on network '%2' failed.
If the condition persists, check the cable connecting
the node to the network. Next, check for hardware or software errors in
node's network adapter. Finally, check for failures in any network
components to which the node is connected such as hubs, switches,
or bridges.
.

MessageID=1128 SymbolicName=NM_EVENT_CLUSTER_NETWORK_UP
Language=English
Cluster network '%1' is operational (up). All available server cluster nodes
attached to the network can communicate using it.
.

MessageID=1129 SymbolicName=NM_EVENT_CLUSTER_NETWORK_PARTITIONED
Language=English
Cluster network '%1' is partitioned. Some attached server cluster nodes cannot
communicate with each other over the network. The server cluster was not able
to determine the location of the failure. Look for additional
entries in the system event log indicating which nodes have lost
communication. If the condition persists, check for failures in any network
components to which the nodes are connected such as hubs, switches, or
bridges. Also check for hardware or software errors in the adapters that
attach the nodes to the network.
.

MessageID=1130 SymbolicName=NM_EVENT_CLUSTER_NETWORK_DOWN
Language=English
Cluster network '%1' is down. None of the available nodes can communicate
using this network. If the condition persists, check for failures in any
network components to which the nodes are connected such as hubs, switches,
or bridges. Next, check the cables connecting the nodes to the network.
Finally, check for hardware or software errors in the adapters that attach
the nodes to the network.
.

MessageID=1131 SymbolicName=NM_EVENT_NETINTERFACE_CREATED
Language=English
An interface was added for node %1 on network %2.
.

MessageID=1132 SymbolicName=NM_EVENT_NETINTERFACE_DELETED
Language=English
The interface for node %1 on network %2 was removed.
.

MessageID=1133 SymbolicName=NM_EVENT_NETWORK_CREATED
Language=English
New network %1 was added to the server cluster.
.

MessageID=1134 SymbolicName=NM_EVENT_NETWORK_DELETED
Language=English
Network %1 was removed from the server cluster.
.

MessageID=1135 SymbolicName=NM_EVENT_NODE_DOWN
Language=English
Cluster node %1 was removed from the active server cluster membership.
Cluster service may have been stopped on the node, the node may have
failed, or the node may have lost communication with the other active
server cluster nodes.
.

MessageID=1136 SymbolicName=NM_EVENT_NODE_BANISHED
Language=English
Cluster node %1 failed a critical operation. It will be removed from the
active server cluster membership. Check that the node is functioning
properly and that it can communicate with the other active server cluster nodes.
.

MessageId=1137 SymbolicName=EVTLOG_DATA_DROPPED
Language=English
The EventLog replication queue %1 is full. %2 event(s) was(were) discarded
for a total size of %3.
.

MessageID=1138 SymbolicName=RES_SMB_CANT_CREATE_DFS_ROOT
Language=English
Cluster File Share '%1' could not be made a DFS root share because a DFS root
could not be created on this node. This could be due to a currently existing
DFS root on this node. If you want to make file share '%1' a DFS root share,
open the DFS Manager UI in the Administrative Tools folder in the Control
Panel, delete any existing DFS root, and then bring the file share '%1'
online.
.

MessageId=1139 SymbolicName=RES_DISK_PNP_CHANGING_QUORUM
Language=English
Physical Disk resource received a notification that
the drive letter on the quorum drive was changed from '%1:' to '%2:'.
.

MessageId=1140 SymbolicName=RES_NETNAME_DNS_CANNOT_STOP
Language=English
A DNS query or update operation started by the Network Name resource did not complete.
To avoid further problems, the Network Name resource has stopped the host
Resource Monitor process. If this condition recurs, move the resource
into a separate Resource Monitor  so it won't affect other resources.
Then, consult your network administrator to resolve the DNS problem.
.

MessageID=1141 SymbolicName=RES_SMB_CANT_INIT_DFS_SVC
Language=English
Cluster DFS Root '%1' could not initialize the DFS service on this node. This
is preventing the DFS Root resource from coming online. If the 'Distributed
File System' is not listed as one of the services that has started on this
node when you issue the command 'net start', then you may manually try to
start the DFS service by using the command 'net start dfs'. Once the DFS
service is running, try to bring the DFS root resource online.
.

MessageID=1142 SymbolicName=RES_SMB_CANT_ONLINE_DFS_ROOT
Language=English
Cluster DFS Root '%1' could not be brought online on this node. The error code is %2.
.

MessageID=1143 SymbolicName=CS_STOPPING_SVC_ON_REMOTE_NODES
Language=English
Cluster service is attempting to stop the active Cluster services on all
other server cluster nodes as a part of the restore database operation. After the
restoration procedure is successful on this node, you have to manually restart
Cluster service on all other server cluster nodes.
.

MessageID=1144 SymbolicName=NM_EVENT_REGISTER_NETWORK_FAILED
Language=English
Cluster service failed to register the network '%1'
with the Cluster network provider. The error code was %2.
.

MessageID=1145 SymbolicName=RMON_RESOURCE_TIMEOUT
Language=English
Cluster resource %1 timed out. If the pending timeout is too short for this
resource, consider increasing the pending timeout value.
.

MessageID=1146 SymbolicName=FM_EVENT_RESMON_DIED
Language=English
The cluster resource monitor died unexpectedly, an attempt will be made to restart it.
.

MessageID=1147 SymbolicName=LM_QUORUM_LOG_NOT_FOUND
Language=English
Cluster service encountered a fatal error. The vital quorum log
file '%1' could not be found. If you have a backup of the quorum log file, you
may try to start Cluster service with logging disabled by entering%n
%nnet start clussvc /noquorumlogging%n
%nat a command window, copy the backed up quorum log file to the MSCS directory
on the quorum drive, stop Cluster service using 'net stop clussvc', and restart 
Cluster service with logging re-enabled using the 'net start clussvc' command. 
If you do not have a backup of the quorum log file, you may try to start 
Cluster service by entering%n
%nnet start clussvc /resetquorumlog%n
%nat a command window. This will attempt to create a new quorum log file based on 
possibly stale information in the server cluster database. You may then stop 
Cluster service and restart it with logging re-enabled using the 'net start clussvc' 
command.
.

MessageID=1148 SymbolicName=LM_QUORUM_LOG_CORRUPT
Language=English
Cluster service encountered a fatal error. The vital quorum log
file '%1' is corrupt. If you have a backup of the quorum log file,
you may try to start Cluster service with logging disabled by entering%n
%nnet start clussvc /noquorumlogging%n
%nat a command window, copy the backed up quorum log file to the MSCS directory
on the quorum drive, stop Cluster service using 'net stop clussvc', and restart 
Cluster service with logging re-enabled using the 'net start clussvc' command. 
If you do not have a backup of the quorum log file, you may try to start Cluster 
service by entering%n
%nnet start clussvc /resetquorumlog%n
%nat a command window. This will attempt to create a new quorum log file based on 
possibly stale information in the server cluster database. You may then stop 
Cluster service and restart it with logging re-enabled using the 'net start clussvc' 
command.
.

MessageID=1149 SymbolicName=RES_NETNAME_CANT_DELETE_DNS_RECORDS
Language=English
The DNS Host (A) and Pointer (PTR) records associated with Cluster resource
'%1' were not removed from the resource's associated DNS server. If necessary,
they can be deleted manually. Contact your DNS administrator to assist with
this effort.
.

MessageID=1150 SymbolicName=RES_NETNAME_DNS_PTR_RECORD_DELETE_FAILED
Language=English
The removal of the DNS Pointer (PTR) record (%2) for host %3 which is
associated with Cluster Network Name resource '%1' failed with error %4.  If
necessary, the record can be deleted manually. Contact your DNS administrator
to assist you in this effort.
.

MessageID=1151 SymbolicName=RES_NETNAME_DNS_A_RECORD_DELETE_FAILED
Language=English
The removal of the DNS Host (A) record (%2) associated with Cluster Network
Name resource '%1' failed with error %3.  If necessary, the record can be
deleted manually. Contact your DNS administrator to assist with this effort.
.

MessageID=1152 SymbolicName=RES_NETNAME_DNS_SINGLE_A_RECORD_DELETE_FAILED
Language=English
The removal of the DNS Host (A) record (host: %2, IP address: %3)
associated with Cluster Network Name resource '%1' failed with error %4.  If
necessary, the record can be deleted manually. Contact your DNS administrator
to assist with this effort.
.

MessageID=1153 SymbolicName=FM_EVENT_GROUP_FAILOVER
Language=English
Cluster service is attempting to failover the Cluster Resource Group '%1' from node %2 to node %3.
.

MessageID=1154 SymbolicName=FM_EVENT_GROUP_FAILBACK
Language=English
Cluster service is attempting to failback the Cluster Resource Group '%1' from node %2 to node %3.
.

MessageID=1155 SymbolicName=NM_EVENT_CLUSNET_ENABLE_SHUTDOWN_FAILED
Language=English
Cluster service failed to enable automatic shutdown of the Cluster Network
Driver. The error code was %1.
.

MessageID=1156 SymbolicName=NM_EVENT_CLUSNET_INITIALIZE_FAILED
Language=English
Initialization of the Cluster Network Driver failed. The error code was %1.
.

MessageID=1157 SymbolicName=NM_EVENT_CLUSNET_RESERVE_ENDPOINT_FAILED
Language=English
Reservation of Cluster Control Message Protocol port %1 failed.
The error code was %2.
.

MessageID=1158 SymbolicName=NM_EVENT_CLUSNET_ONLINE_COMM_FAILED
Language=English
The Cluster Network Driver failed to enable communication for cluster
node %1. The error code was %2.
.

MessageID=1159 SymbolicName=NM_EVENT_CLUSNET_SET_INTERFACE_PRIO_FAILED
Language=English
Cluster service failed to set network interface priorities for node %1.
The error code was %2.
.

MessageID=1160 SymbolicName=NM_EVENT_CLUSNET_REGISTER_NODE_FAILED
Language=English
Registration of cluster node %1 with the Cluster Network Driver failed.
The error code was %2.
.

MessageID=1161 SymbolicName=RES_DISK_INVALID_MP_SIG_UNAVAILABLE
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" cannot be verified as
acceptable because the target volume signature was unavailable.
.

MessageID=1162 SymbolicName=RES_DISK_INVALID_MP_SOURCE_EQUAL_TARGET
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" is not acceptable
as the source and target are the same device.
.

MessageID=1163 SymbolicName=RES_DISK_INVALID_MP_SIG_ENUMERATION_FAILED
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" cannot be verified as
acceptable because the cluster disk signature enumeration failed.
.

MessageID=1164 SymbolicName=RES_DISK_INVALID_MP_QUORUM_SIG_UNAVAILABLE
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" cannot be verified as
acceptable because the quorum disk signature was unavailable.
.

MessageID=1165 SymbolicName=RES_DISK_INVALID_MP_TARGET_IS_QUORUM
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" is not acceptable
because the target volume is the quorum disk.  The quorum disk
cannot be dependent on another disk resource.
.

MessageID=1166 SymbolicName=RES_DISK_INVALID_MP_ENUM_DISK_DEP_FAILED
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" cannot be verified as
acceptable because the cluster disk dependency enumeration failed.
.

MessageID=1167 SymbolicName=RES_DISK_INVALID_MP_INVALID_DEPENDENCIES
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" is not acceptable
because the cluster dependencies are not correctly set between the
source and the target volume.%n
%nThe target volume must be dependent on the source volume. Insure that
the disk dependencies are set correctly.
.

MessageID=1168 SymbolicName=SERVICE_CLUSRTL_BAD_PATH
Language=English
Cluster service failed to initialize due to an invalid file specification in
the CLUSTERLOG environment variable. Please check that the specified drive
letter exists and that the drive is not read-only.
.

MessageID=1169 SymbolicName=SERVICE_CLUSRTL_ERROR
Language=English
Cluster service failed to initialize due to the following error:%n
%n%1
.

MessageID=1170 SymbolicName=RES_DISK_FULL_DISK_QUORUM
Language=English
Cluster disk resource "%1" [quorum] is full or nearly at capacity.
The cluster service will attempt to start, but may fail because of the
lack of disk space. If Cluster service fails after this message is
posted, restart Cluster service (with logging disabled) by starting
a command window, and typing%n
%nnet start clussvc /noquorumlogging%n
%nMove some of the unnecessary files from the quorum disk to another volume
after Cluster service is started.%n
Do not move files required by Cluster service!%n
Once additional space has been made available on the quorum disk, use
'net stop clussvc' to stop Cluster service, then run 'net start clussvc' to
restart Cluster service with logging re-enabled.%n
The volume name for this resource is "%2".
.

MessageID=1171 SymbolicName=RES_DISK_FULL_DISK_NOT_QUORUM
Language=English
Cluster disk resource "%1" is full or nearly at capacity. Move some of the
unnecessary files from this disk to another volume after Cluster service
is started.%n
The volume name for this resource is "%2".
.

MessageID=1172 SymbolicName=RES_DISK_FULL_DISK_UNKNOWN
Language=English
Cluster disk resource "%1" [unknown] is full or nearly at capacity.
Cluster service will attempt to start, but may fail because of the lack of disk
space. If Cluster service fails after this message is posted, restart
Cluster service (with logging disabled) by starting a command window and typing%n
%nnet start clussvc /noquorumlogging%n
%nIf this is the quorum disk, move some of the unnecessary files from the
quorum disk to another volume after Cluster service is started. If this
disk is not the quorum disk, move some files to another volume.
Do not move files required by Cluster service!%n
Once additional space has been made available on the quorum disk, use
'net stop clussvc' to stop Cluster service, then run 'net start clussvc' to
restart Cluster service with logging re-enabled.%n
The volume name for this resource is "%2".
.

MessageID=1173 SymbolicName=MM_EVENT_RELOAD_FAILED
Language=English
Cluster service is shutting down because the membership engine detected a
membership event while trying to join the server cluster. Shutting down is the
normal response to this type of event. Cluster service will restart per the
Service Manager's recovery actions.
.

MessageID=1174 SymbolicName=MM_EVENT_INTERNAL_ERROR
Language=English
Cluster service is shutting down because the membership engine suffered an
internal error. Cluster service will restart per the Service Manager's
recovery actions.
.

MessageID=1175 SymbolicName=MM_EVENT_PRUNED_OUT
Language=English
Cluster service is shutting down because the membership engine detected the
loss of connectivity to all other nodes in the cluster. This could be due to a
network interface failure on this node. Check the system event log for any
network related failures around the time of this event. Also check your
physical network infrastructure to ensure that communication
between this node and all other nodes in the server cluster is intact. Cluster
service will restart per the Service Manager's recovery actions but may not
join the server cluster until any network problems has been resolved.
.

MessageID=1176 SymbolicName=MM_EVENT_PARIAH
Language=English
Cluster service is shutting down as requested by node %1 (%2). Check the system
event log on node %1 to determine the reason for the shutdown request. Cluster
service will restart per the Service Manager's recovery actions.
.

MessageID=1177 SymbolicName=MM_EVENT_ARBITRATION_FAILED
Language=English
Cluster service is shutting down because the membership engine failed to
arbitrate for the quorum device. This could be due to the loss of network
connectivity with the current quorum owner.  Check your physical network
infrastructure to ensure that communication between this node and
all other nodes in the server cluster is intact.
.

MessageID=1178 SymbolicName=MM_EVENT_ARBITRATION_STALLED
Language=English
Cluster service is shutting down because the membership engine detected that
the arbitration process for the quorum device has stalled. This could be due
to problems with your disk hardware and/or the associated drivers.  Check the
system event log for any disk related errors.
.

MessageID=1179 SymbolicName=MM_EVENT_SHUTDOWN_DURING_RGP
Language=English
Cluster service received a membership event while shutting down. Cluster
service is shutting down immediately to facilitate server cluster membership
for the remaining nodes. This is the normal response to this type of event.
.

MessageID=1180 SymbolicName=NM_EVENT_FORM_WITH_NO_NETWORKS
Language=English
While forming a server cluster on this node, Cluster service failed to
detect a viable network enabled for cluster use. Other nodes will not be
able to join this cluster unless network communication can be established.
.

MessageID=1181 SymbolicName=NETRES_RESOURCE_START_ERROR
Language=English
Cluster %1 resource failed while starting service.
.

MessageID=1182 SymbolicName=NETRES_RESOURCE_STOP_ERROR
Language=English
Cluster %1 resource failed while stopping service.
.

MessageID=1183 SymbolicName=RES_DISK_INVALID_MP_SOURCE_NOT_CLUSTERED
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for clustered target volume "%3" is not acceptable
because the source volume is not a clustered disk. Both the source
and target must be clustered disks.  When the target disk is moved
to another node, the mountpoint will become invalid. Also, this
mountpoint is available only on the current node.
.

MessageID=1184 SymbolicName=RES_DISK_MP_VOLGUID_LIST_EXCESSIVE
Language=English
Cluster disk resource "%1":%n
The VolGuid list maintained for this disk resource appears to have
too many entries. If all the VolGuid entries are valid, than this
message can safely be ignored. If the VolGuid list should be
recreated, you can do this by setting this disk resource's Parameter
key "UseMountPoints=0" and taking the disk offline and online again.
For the quorum resource, set "UseMountPoints=0" and then move the
quorum disk from one node to another. Note that when mountpoints are
disabled ("UseMountPoints=0"), mountpoints on the clustered disks
will not work correctly until they are re-enabled ("UseMountPoints=1").

.

MessageID=1185 SymbolicName=RES_NETNAME_CANT_DELETE_DEPENDENT_RESOURCE_DNS_RECORDS
Language=English
The DNS Host (A) and Pointer (PTR) records for Cluster Network Name resource
'%1' and %2 were not removed from the resource's associated DNS server. If
necessary, they can be deleted manually. Contact your DNS administrator to
assist with this effort.
.

MessageID=1186 SymbolicName=SERVICE_PASSWORD_CHANGE_INITIATED
Language=English
The password associated with the Cluster service domain account is being
updated on this node.
.

MessageID=1187 SymbolicName=SERVICE_PASSWORD_CHANGE_SUCCESS
Language=English
The password associated with the Cluster service domain account was
successfully updated on this node.
.

MessageID=1188 SymbolicName=SERVICE_PASSWORD_CHANGE_FAILED
Language=English
The update of the Cluster service domain account password failed on this node.
Cluster service on this node will be stopped. If Cluster service cannot be 
started due to a logon failure, reset Cluster service's domain account password 
through the Services snap-in in the Microsoft Management Console.
.

MessageID=1189 SymbolicName=SERVICE_CLUSTER_DATABASE_RESTORE_SUCCESSFUL
Language=English
Cluster service has successfully restored the cluster database to the quorum disk.
Please verify that the restored configuration of the cluster is as expected. You
may use the Cluster Administrator tool to verify the restored configuration.
After that, you can start the Cluster service on the remaining cluster nodes by entering
'net start clussvc' at a command window on those nodes. This will result in
these nodes synchronizing the restored database from this initially restored node.
.

MessageID=1190 SymbolicName=RES_NETNAME_COMPUTER_ACCOUNT_DELETED
Language=English
The computer account for Cluster resource '%1' in domain %2 was deleted.
.

MessageID=1191 SymbolicName=RES_NETNAME_DELETE_COMPUTER_ACCOUNT_FAILED_STATUS
Language=English
The computer account for Cluster resource '%1' in domain %2 could not be
deleted. The associated error code is stored in the data section. The domain
administrator will need to remove this account manually.%n
%nThe presence of a computer account for this name will cause authentication
using the Negotiate and Kerberos security packages to fail.
.

MessageID=1192 SymbolicName=RES_NETNAME_DELETE_COMPUTER_ACCOUNT_FAILED
Language=English
The computer account for Cluster resource '%1' in domain %2 could not be
deleted for the following reason:%n
%n%3%n
%nThe domain administrator will need to remove this account manually.
%nThe presence of a computer account for this name will cause authentication
using the Negotiate and Kerberos security packages to fail.
.

MessageID=1193 SymbolicName=RES_NETNAME_ADD_COMPUTER_ACCOUNT_FAILED_STATUS
Language=English
The computer account for Cluster resource '%1' in domain %2 could not be
created for the following reason:%n
%n%3.%n
%nThe associated error code is stored in the data section.%n
%nThe Cluster Service Account may lack the proper access rights to Active
Directory. The domain administrator should be contacted to assist with
resolving this issue.
.

MessageID=1194 SymbolicName=RES_NETNAME_ADD_COMPUTER_ACCOUNT_FAILED
Language=English
The computer account for Cluster resource '%1' in domain %2 could not be
created for the following reason: %3.%n
%nThe text for the associated error code is: %4%n
%nThe Cluster Service Account may lack the proper access rights to Active
Directory. The domain administrator should be contacted to assist with
resolving this issue.
.

MessageID=1195 SymbolicName=RES_NETNAME_DNS_REGISTRATION_FAILED_STATUS
Language=English
The required registration of the DNS name(s) associated with Cluster resource
'%1' failed. The associated error code is stored in the data section.
.

MessageID=1196 SymbolicName=RES_NETNAME_DNS_REGISTRATION_FAILED
Language=English
The required registration of the DNS name(s) associated with Cluster resource
'%1' failed for the following reason:%n
%n%2%n
%nPlease check with your network adminstrator for the best recovery action.
.

MessageID=1197 SymbolicName=NM_EVENT_MULTICAST_ADDRESS_CHOICE
Language=English
Cluster node %1 selected multicast address %2 for network %3 after failing
to contact a MADCAP server.
.

MessageID=1198 SymbolicName=NM_EVENT_OBTAINED_MULTICAST_LEASE
Language=English
Cluster node %1 obtained a lease on a new multicast address (%2) for
network %3 from MADCAP server %4.
.

MessageID=1199 SymbolicName=NM_EVENT_MULTICAST_ADDRESS_FAILURE
Language=English
Cluster node %1 was not able to obtain a multicast address from
a MADCAP server for network %2 or to select one automatically. The
error code was %3. Cluster operations will not be affected, although
cluster nodes will not exchange multicast messages on this network.
.

MessageID=1200 SymbolicName=FM_EVENT_GROUP_START_ONLINE
Language=English
The Cluster Service is attempting to bring online the Resource Group "%1".
.

MessageID=1201 SymbolicName=FM_EVENT_GROUP_COMPLETE_ONLINE
Language=English
The Cluster Service brought the Resource Group "%1" online.
.

; // If you change the following MessageId, then you must also update this value
; // in nt\public\internal\base\inc\clussprt.h
MessageID=1202 SymbolicName=EVT_EVENT_TIME_DELTA_INFORMATION
Language=English
The time delta between node %1 and node %2 is %3(in 100 nanosecs). 
.

MessageID=1203 SymbolicName=FM_EVENT_GROUP_START_OFFLINE
Language=English
The Cluster Service is attempting to offline the Resource Group "%1".
.

MessageID=1204 SymbolicName=FM_EVENT_GROUP_COMPLETE_OFFLINE
Language=English
The Cluster Service brought the Resource Group "%1" offline.
.

MessageID=1205 SymbolicName=FM_EVENT_GROUP_FAILED_ONLINE_OFFLINE
Language=English
The Cluster Service failed to bring the Resource Group "%1" completely online or offline.
.

MessageID=1206 SymbolicName=RES_NETNAME_UPDATE_COMPUTER_ACCOUNT_FAILED_STATUS
Language=English
The computer account for Cluster resource '%1' in domain %2 could not be
configured for the following reason:%n
%n%3.%n
%nThe associated error code is stored in the data section.%n
%nThe Cluster Service Account may lack the proper access rights to Active
Directory. The domain administrator should be contacted to assist with
resolving this issue.
.

MessageID=1207 SymbolicName=RES_NETNAME_UPDATE_COMPUTER_ACCOUNT_FAILED
Language=English
The computer account for Cluster resource '%1' in domain %2 could not be
configured for the following reason:%n
%n%3%n
%nThe text for the associated error code is: %4%n
%nThe Cluster Service Account may lack the proper access rights to Active
Directory. The domain administrator should be contacted to assist with
resolving this issue.
.

MessageID=1208 SymbolicName=RES_DISK_INVALID_MP_TARGET_NOT_CLUSTERED
Language=English
Cluster disk resource "%1":%n
Mount point "%2" for target volume "%3" is not acceptable
because the target volume is not a clustered disk. Both the source
and target must be clustered disks.  When the source disk is moved
to another node, the mountpoint will become invalid. Also, this
mountpoint is available only on the current node.
.

MessageID=1209 SymbolicName=CLUSDISK_RESET_BUS_REQUESTED
Language=English
Cluster service is requesting a bus reset for device %1.
.

MessageID=1210 SymbolicName=RES_NETNAME_COMPOBJ_IN_DS
Language=English
Cluster resource '%1' failed to go online because its associated computer
account (%2) exists in Active Directory and the Kerberos authentication is not
enabled for the resource. Client applications that are using Kerberos based
authentication (either directly or through the Negotiate security package)
will fail to authenticate when contacting a service by this network name.%n
%nTo bring the resource online, either enable Kerberos authentication or
delete the computer account.
.

MessageID=1211 SymbolicName=RES_NETNAME_NO_WRITEABLE_DC_STATUS
Language=English
The computer account for Cluster resource '%1' could not be created in
the cluster's domain because a domain controller running Active Directory
could not be located. The associated error code is stored in the data section.%n
%nCheck this node's connectivity to a domain controller running Active
Directory.
.

MessageID=1212 SymbolicName=RES_NETNAME_NO_WRITEABLE_DC
Language=English
The computer account for Cluster resource '%1' could not be created in
the cluster's domain because a domain controller running Active Directory
could not be located for the following reason:%n
%n%2
%nCheck this node's connectivity to a domain controller running Active
Directory.
.

MessageID=1213 SymbolicName=RES_NETNAME_RENAME_RESTORE_FAILED
Language=English
The computer account in Active Directory (%2) for Cluster resource '%1' could
not be renamed back to its original name (%3) and is now different from the
network name. The associated error code is stored in the data section.%n
%nIf the computer account name is not changed back to the orignal name, an
attempt to create a new computer account will be made the next time this
resource is brought online. This may cause improper operation or the failure
of resources that are dependent on this resource due to the loss of
configuration information stored with the associated computer account.%n
%nTo recover, either set the resource back to its original network name or
edit the name of the computer account using the ADSI editor MMC snapin.
.

MessageID=1214 SymbolicName=RES_NETNAME_CANT_ADD_NAME2
Language=English
Cluster Network Name resource '%1' cannot be brought online because the name
could not be added to the system for the following reason: %2.
.

MessageID=1215 SymbolicName=RES_NETNAME_NOT_REGISTERED_WITH_RDR
Language=English
Cluster Network Name %2 is no longer registered with its hosting system. The
associated resource name is '%1'.
.

MessageID=1216 SymbolicName=SERVICE_NETNAME_CHANGE_WARNING
Language=English
Cluster Network Name was changed even though the core Cluster Network Name resource 
could not perform all the related changes.  If you have problems bringing the Cluster 
Network Name resource online, please check the eventlog for troubleshooting.
.

MessageID=1217 SymbolicName=RES_NETNAME_RENAME
Language=English
The Network Name for resource '%1' was changed from %2 to %3.
.

MessageID=1218 SymbolicName=RES_NETNAME_ONLINE_RENAME_RECOVERY_MISSING_ACCOUNT
Language=English
The computer account in Active Directory for Cluster resource '%1' could not
be found during rename recovery on the Domain Controller where it was created
(%2).%n
%nThe original name (%3) was being renamed to %4 and neither computer account
could be found. The resource cannot go online until the computer account is
recreated. This can be accomplished by disabling and re-enabling Kerberos
Authentication for this resource.
.

MessageID=1219 SymbolicName=RES_NETNAME_ONLINE_RENAME_DC_NOT_FOUND
Language=English
The search in Active Directory to find computer account %2 on DC %3 for
resource '%1' failed. The associated error code is stored in the data
section.%n
%nThe computer account for this resource was in the process of being renamed
and did not complete. The Domain Controller where the account was being
renamed is either unavailable or is preventing access when searching for the
account. This DC must be made available before this resource can go online in
order to reconcile the rename operation.%n
%nIf this is not possible, disable and re-enable Kerberos Authentication and
an attempt will be made to find the computer account on a different DC.
.

MessageID=1220 SymbolicName=RES_NETNAME_ONLINE_RENAME_RECOVERY_FAILED
Language=English
The computer account for resource '%1' failed to be renamed from %2 to %3
using Domain Controller %4. The associated error code is stored in the data
section.%n
%nThe computer account for this resource was in the process of being renamed
and did not complete. This was detected during the online process for this
resource. In order to recover, the computer account must be renamed to the
current value of the Name property, i.e., the name presented on the network.%n
%nThe Domain Controller where the renamed was attempted might not be
available; if this is the case, wait for the Domain Controller to be available
again. The Domain Controller could be denying access to the account; after
resolving access, try to bring the name online again.%n
%nIf this is not possible, disable and re-enable Kerberos Authentication and
an attempt will be made to find the computer account on a different DC. You
need to change the Name property to %2 in order to use the existing computer
account.
.

MessageID=1221 SymbolicName=RES_NETNAME_RENAME_OUT_OF_SYNCH_WITH_COMPOBJ
Language=English
The Network Name (%2) for resource '%1' does not match the name of the
corresponding computer account in AD (%3). This is usually due to the name
change of the computer account not replicating to other domain controllers in
the domain. A subsequent rename cannot be performed until the name change has
replicated to other DCs. If the Network Name has not been changed, then the it
is out synch with the name of the computer account. This problem can be fixed
by renaming the computer account and letting that change replicate to other
DCs. Once that has occurred, the Network Name for this resource can be
changed.
.

MessageID=1222 SymbolicName=CS_EVENT_CLEANUP_ON_EVICTION
Language=English
This node was evicted from the cluster while it was down.  The cluster state has been
cleaned up.  The cleanup status was %1. 
.

MessageID=1223 SymbolicName=RES_IPADDR_INVALID_NETWORK_ROLE
Language=English
Cluster IP Address resource '%1' cannot be brought online because the
configured role of cluster network '%2' does not allow client access. Please
check your network configuration.
.

MessageID=1224 SymbolicName=RES_IPADDR_PATCHED_NETWORK
Language=English
Cluster IP Address resource '%1' has been moved to cluster network '%2'
because its IP address and subnet mask match. To reverse this assignment,
take resource '%1' offline, restore the '%1' Network property to its former
value, set the '%1' OverrideAddressMatch property to 1, and bring resource
'%1' back online.
.

MessageID=1225 SymbolicName=RES_NETNAME_UPGRADE_TO_KERBEROS_SUPPORT_FAILED
Language=English
The Network Name resource '%1' is a provider for an MSMQ resource. Kerberos
Authentication support must be enabled for the Network Name resource in order
to successfully bring the MSMQ resource online. The attempt to enable this
feature failed; the associated error code is stored in the data section.%n
%nTo set the RequireKerberos property for this resource, take this resource
offline, display this resource's properties in Cluster Administrator and
select the Parameters tab. Check the "Enable Kerberos Authentication" box and
press OK to save the changes. Bring this resource online.%n
%nAlternatively, the property can be set by using the cluster.exe command line
tool:%n
%ncluster resource "%1" /priv RequireKerberos=1
.

MessageID=1226 SymbolicName=RES_NETNAME_TCB_NOT_HELD
Language=English
The Network Name resource '%1' has Kerberos Authentication support
enabled. This feature requires that the Cluster Service Account hold the Trust
Computing Base (TCB) or "Act as part of the operating system" privilege. This
privilege is locally granted to the Cluster Service Account during cluster
setup and is no longer granted to the account. It may have been removed as the
result of the application of a Group Policy object to this cluster node.%n
%nThe TCB privilege can be granted via the Local Security Policy snap-in
(secpol.msc). Q307532 contains information on how to assign user rights. Add
the Cluster Service Account to the list of accounts that have this
privilege.%n
%nIn order for the privilege to be enabled, the Cluster Service must be
stopped and restarted. This procedure may have to be applied on each node in
the cluster.
.

MessageID=1227 SymbolicName=RES_NETNAME_LSA_ERROR
Language=English
The Network Name resource '%1' has Kerberos Authentication support enabled and
was unable to add the virtual network name credentials to the LSA. The
associated error code is stored in the data section.
.

MessageID=1228 SymbolicName=CLNET_CLUSSVC_HUNG_TERMINATE
Language=English
The Cluster Network Driver has lost contact with Cluster service for %2 seconds. Cluster service will be Terminated.
.

MessageID=1229 SymbolicName=CLNET_CLUSSVC_HUNG
Language=English
The Cluster Network Driver has lost contact with Cluster service for %2 seconds.
.

MessageID=1230 SymbolicName=RMON_DEADLOCK_DETECTED
Language=English
Cluster resource monitor detected a deadlock possibly caused by invoking the '%4' entry point of
resource DLL '%1', resource type '%2', resource '%3'. This process is now attempting to terminate. 
.

MessageID=1231 SymbolicName=CS_INVALID_START_PARAMETER
Language=English
The start parameter '%1' supplied to the Cluster Service is invalid. The service is now stopping.
Valid start parameters are %n%n
ResetQuorumLog/RQ - Reset the quorum log file at startup.%n
FixQuorum/FQ - Start the Cluster Service even in the absence of a functioning quorum resource.%n
NoQuorumLogging/NQ - Run the Cluster Service in this node with quorum logging turned off.%n
DebugResmon/DR - The Cluster Service waits for a debugger to be attached to all Resource Monitor processes at their start.%n
ForceQuorum/FO <N1,N2,...> - Force a majority node set with the node list N1, N2, etc. (Applicable only for Majority Node Set quorum)%n
NoGroupInfoEvtLogging/NG - Do not log events to the event log related to group online and offline.
.

MessageID=1232 SymbolicName=RES_GENSCRIPT_TIMEOUT
Language=English
Cluster generic script resource %1 timed out. %2 script entry point did not complete execution
in a timely manner. This could be due to an infinite loop or a hang in this entry point, or the
pending timeout may be too short for this resource. Please review the %2 script entry point to make
sure there's no infinite loop or a hang in the script code, and then consider increasing the pending
timeout value if necessary. In a command shell, run "cluster res "%1" /prop PersistentState=0"
to disable this resource, and then run "net stop clussvc" to stop the cluster service. Ensure that
any problem in the script code is fixed.  Then run "net start clussvc" to start the cluster service.
If necessary, ensure that the pending time out is increased before bringing the resource online
again.
.

MessageID=1233 SymbolicName=RES_GENSCRIPT_HANGMODE
Language=English
Cluster generic script resource %1: Request to perform the %2 operation will not be processed.
This is because of a previous failed attempt to execute the %3 entry point in a timely fashion.
Please review the script code for this entry point to make sure there is no infinite loop or a hang
in it, and then consider increasing the resource pending timeout value if necessary. In a
command shell, run "cluster res "%1" /prop PersistentState=0" to disable this resource, and then
run "net stop clussvc" to stop the cluster service. Ensure that any problem in the script code is
fixed.  Then run "net start clussvc" to start the cluster service. If necessary, ensure that the
pending time out is increased before bringing the resource online again.
.

;#endif // _CLUSVMSG_INCLUDED