/*++ BUILD Version: 0001 Copyright (c) 1990 Microsoft Corporation Module Name: VINT.H Abstract: This module contains macro support for manipulating virtual interrupt bit from v86 mode and 16bit protect mode. FCLI/FST/FIRET result in exact behavior of these instructions on the chip without trapping. Author: Sudeepb 08-Dec-1992 Created Revision History: sudeepb 16-Mar-1993 added FIRET --*/ /* See \nt\private\inc\vdm.h for a complete list of the NTVDM state flag bit definitions INTERRUPT_PENDING_BIT - set if interrupts pending VIRTUAL_INTERRUPT_BIT - This bit always correctly reflects the interrupt disbale/enable state of the vDM while in 16bit land. MIPS_BIT_MASK - tells whether VDM is running on x86/mips EXEC_BIT_MASK - tells if DOS is in int21/exec operation. */ #define INTERRUPT_PENDING_BIT 0x0003 #define VDM_INTS_HOOKED_IN_PM 0x0004 #define VIRTUAL_INTERRUPT_BIT 0x0200 #define MIPS_BIT_MASK 0x400 #define EXEC_BIT_MASK 0x800 #define RM_BIT_MASK 0x1000 #define RI_BIT_MASK 0x2000 #if defined(NEC_98) #define FIXED_NTVDMSTATE_SEGMENT 0x60 #else // !NEC_98 #define FIXED_NTVDMSTATE_SEGMENT 0x70 #endif // !NEC_98 #define FIXED_NTVDMSTATE_OFFSET 0x14 #define FIXED_NTVDMSTATE_LINEAR ((FIXED_NTVDMSTATE_SEGMENT << 4) + FIXED_NTVDMSTATE_OFFSET) #if defined(NEC_98) #define FIXED_NTVDMSTATE_REL40 0x214 #else // !NEC_98 #define FIXED_NTVDMSTATE_REL40 0x314 #endif // !NEC_98 #define FIXED_NTVDMSTATE_SIZE 4 #if defined(NEC_98) #define NTIO_LOAD_SEGMENT 0x60 #else // !NEC_98 #define NTIO_LOAD_SEGMENT 0x70 #endif // !NEC_98 #define NTIO_LOAD_OFFSET 0 #define pNtVDMState ((PULONG)FIXED_NTVDMSTATE_LINEAR) #define VDM_TIMECHANGE 0x00400000 /* ASM ; FCLI macro should be used in v86mode/16bit preotect mode code to replace ; costly cli's. Please note that this macro could destroy the Overflow ; bit in the flag. FCLI macro local a,b,c push ds push ax mov ax,40h mov ds,ax lahf test word ptr ds:FIXED_NTVDMSTATE_REL40, MIPS_BIT_MASK OR RI_BIT_MASK jnz short b lock and word ptr ds:FIXED_NTVDMSTATE_REL40,NOT VIRTUAL_INTERRUPT_BIT a: sahf pop ax pop ds jmp short c b: cli jmp short a c: endm ; ; FSTI macro should be used in v86mode or 16bit protectmode code to replace ; costly sti's. Please note that this macro could destroy the Overflow bit ; in the flag. FSTI macro local a,b,c push ds push ax mov ax,40h mov ds,ax lahf test word ptr ds:FIXED_NTVDMSTATE_REL40, INTERRUPT_PENDING_BIT jnz short b test word ptr ds:FIXED_NTVDMSTATE_REL40, MIPS_BIT_MASK OR RI_BIT_MASK jnz short b lock or word ptr ds:FIXED_NTVDMSTATE_REL40, VIRTUAL_INTERRUPT_BIT a: sahf pop ax pop ds jmp short c b: sti jmp short a c: endm FIRET MACRO local a,b,d,e,f,g,i,j,k push ds push ax ;; Do real IRET on MIPS or if interrupts are pending mov ax,40h mov ds,ax test word ptr ds:FIXED_NTVDMSTATE_REL40, MIPS_BIT_MASK OR RI_BIT_MASK jnz short b ;; running on x86 can assume 386 or above instructions push bp mov bp,sp mov ax,[bp+10] ; get flags pop bp test ax,100h ; test if trap flag is set jnz short b ; if so, do iret test ax,200h ; test if interrupt flag is set jz short i ; ZR -> flag image has IF not set lock or word ptr ds:FIXED_NTVDMSTATE_REL40, VIRTUAL_INTERRUPT_BIT test word ptr ds:FIXED_NTVDMSTATE_REL40, INTERRUPT_PENDING_BIT jnz short b j: xchg ah,al ; AH=low byte AL=high byte cld test al,4 ; check direction flag jnz short d ; e: test al,8 ; check overflow flag jnz short f ; go to f if flag image has OF set jo short k ; go to k to reset OF g: sahf ; set low byte of flags from ah pop ax pop ds retf 2 ; IRET and discard flags i: lock and word ptr ds:FIXED_NTVDMSTATE_REL40,NOT VIRTUAL_INTERRUPT_BIT jmp short j f: jo short g ; all OK if OF bit set in real flag ; set the overflow bit in real flag push ax mov al,127 add al,2 ; will set OF pop ax jmp short g k: ; reset the OF push ax xor al,al ; will reset OF pop ax jmp short g d: std jmp short e b: pop ax pop ds iret endm */