;/*++ BUILD Version: 0001 // Increment this if a change has global effects ; ;Abstract: ; ; Constant definitions for the I/O error code log values. ; ;--*/ ; ;#ifndef _MXLOG_ ;#define _MXLOG_ ; ;// ;// Status values are 32 bit values layed out as follows: ;// ;// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 ;// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 ;// +---+-+-------------------------+-------------------------------+ ;// |Sev|C| Facility | Code | ;// +---+-+-------------------------+-------------------------------+ ;// ;// where ;// ;// Sev - is the severity code ;// ;// 00 - Success ;// 01 - Informational ;// 10 - Warning ;// 11 - Error ;// ;// C - is the Customer code flag ;// ;// Facility - is the facility code ;// ;// Code - is the facility's status code ;// ; MessageIdTypedef=NTSTATUS SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS Informational=0x1:STATUS_SEVERITY_INFORMATIONAL Warning=0x2:STATUS_SEVERITY_WARNING Error=0x3:STATUS_SEVERITY_ERROR ) FacilityNames=(System=0x0 RpcRuntime=0x2:FACILITY_RPC_RUNTIME RpcStubs=0x3:FACILITY_RPC_STUBS Io=0x4:FACILITY_IO_ERROR_CODE Serial=0x6:FACILITY_SERIAL_ERROR_CODE ) MessageId=0x0001 Facility=Serial Severity=Informational SymbolicName=SERIAL_KERNEL_DEBUGGER_ACTIVE Language=English The kernel debugger is already using %2. . MessageId=0x0002 Facility=Serial Severity=Informational SymbolicName=SERIAL_FIFO_PRESENT Language=English While validating that %2 was really a serial port. . MessageId=0x0003 Facility=Serial Severity=Informational SymbolicName=SERIAL_USER_OVERRIDE Language=English User configuration data for parameter %2 overriding firmware configuration data. . MessageId=0x0004 Facility=Serial Severity=Warning SymbolicName=SERIAL_NO_SYMLINK_CREATED Language=English Unable to create the symbolic link for %2. . MessageId=0x0005 Facility=Serial Severity=Warning SymbolicName=SERIAL_NO_DEVICE_MAP_CREATED Language=English Unable to create the device map entry for %2. . MessageId=0x0006 Facility=Serial Severity=Warning SymbolicName=SERIAL_NO_DEVICE_MAP_DELETED Language=English Unable to delete the device map entry for %2. . MessageId=0x0007 Facility=Serial Severity=Error SymbolicName=SERIAL_UNREPORTED_IRQL_CONFLICT Language=English Another driver on the system, which did not report its resources, has already claimed the interrupt used by %2. . MessageId=0x0008 Facility=Serial Severity=Error SymbolicName=SERIAL_INSUFFICIENT_RESOURCES Language=English Not enough resources were available for the driver. . MessageId=0x0009 Facility=Serial Severity=Error SymbolicName=SERIAL_UNSUPPORTED_CLOCK_RATE Language=English The baud clock rate configuration is not supported on device %2. . MessageId=0x000A Facility=Serial Severity=Error SymbolicName=SERIAL_REGISTERS_NOT_MAPPED Language=English The hardware locations for %2 could not be translated to something the memory management system could understand. . MessageId=0x000B Facility=Serial Severity=Error SymbolicName=SERIAL_RESOURCE_CONFLICT Language=English The hardware resources for %2 are already in use by another device. . MessageId=0x000C Facility=Serial Severity=Error SymbolicName=SERIAL_NO_BUFFER_ALLOCATED Language=English No memory could be allocated in which to place new data for %2. . MessageId=0x000D Facility=Serial Severity=Error SymbolicName=SERIAL_IER_INVALID Language=English While validating that %2 was really a serial port, the interrupt enable register contained enabled bits in a must be zero bitfield. The device is assumed not to be a serial port and will be deleted. . MessageId=0x000E Facility=Serial Severity=Error SymbolicName=SERIAL_MCR_INVALID Language=English While validating that %2 was really a serial port, the modem control register contained enabled bits in a must be zero bitfield. The device is assumed not to be a serial port and will be deleted. . MessageId=0x000F Facility=Serial Severity=Error SymbolicName=SERIAL_IIR_INVALID Language=English While validating that %2 was really a serial port, the interrupt id register contained enabled bits in a must be zero bitfield. The device is assumed not to be a serial port and will be deleted. . MessageId=0x0010 Facility=Serial Severity=Error SymbolicName=SERIAL_DL_INVALID Language=English While validating that %2 was really a serial port, the baud rate register could not be set consistantly. The device is assumed not to be a serial port and will be deleted. . MessageId=0x0011 Facility=Serial Severity=Error SymbolicName=SERIAL_NOT_ENOUGH_CONFIG_INFO Language=English Some firmware configuration information was incomplete. . MessageId=0x0012 Facility=Serial Severity=Error SymbolicName=SERIAL_NO_PARAMETERS_INFO Language=English No Parameters subkey was found for user defined data. This is odd, and it also means no user configuration can be found. . MessageId=0x0013 Facility=Serial Severity=Error SymbolicName=SERIAL_UNABLE_TO_ACCESS_CONFIG Language=English Specific user configuration data is unretrievable. . MessageId=0x0014 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_PORT_INDEX Language=English On parameter %2 which indicates a multiport card, must have a port index specified greater than 0. . MessageId=0x0015 Facility=Serial Severity=Error SymbolicName=SERIAL_PORT_INDEX_TOO_HIGH Language=English On parameter %2 which indicates a multiport card, the port index for the multiport card is too large. . MessageId=0x0016 Facility=Serial Severity=Error SymbolicName=SERIAL_UNKNOWN_BUS Language=English The bus type for %2 is not recognizable. . MessageId=0x0017 Facility=Serial Severity=Error SymbolicName=SERIAL_BUS_NOT_PRESENT Language=English The bus type for %2 is not available on this computer. . MessageId=0x0018 Facility=Serial Severity=Error SymbolicName=SERIAL_BUS_INTERRUPT_CONFLICT Language=English The bus specified for %2 does not support the specified method of interrupt. . MessageId=0x0019 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_USER_CONFIG Language=English Can not find any configured MOXA Smartio/Industio series board. . MessageId=0x001A Facility=Serial Severity=Error SymbolicName=SERIAL_DEVICE_TOO_HIGH Language=English The user specified port for %2 is way too high in physical memory. . MessageId=0x001B Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_TOO_HIGH Language=English The status port for %2 is way too high in physical memory. . MessageId=0x001C Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_CONTROL_CONFLICT Language=English The status port for %2 overlaps the control registers for the device. . MessageId=0x001D Facility=Serial Severity=Error SymbolicName=SERIAL_CONTROL_OVERLAP Language=English The control registers for %2 overlaps with the %3 control registers. . MessageId=0x001E Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_OVERLAP Language=English The status register for %2 overlaps the %3 control registers. . MessageId=0x001F Facility=Serial Severity=Error SymbolicName=SERIAL_STATUS_STATUS_OVERLAP Language=English The status register for %2 overlaps with the %3 status register. . MessageId=0x0020 Facility=Serial Severity=Error SymbolicName=SERIAL_CONTROL_STATUS_OVERLAP Language=English The control registers for %2 overlaps the %3 status register. . MessageId=0x0021 Facility=Serial Severity=Error SymbolicName=SERIAL_MULTI_INTERRUPT_CONFLICT Language=English Two ports, %2 and %3, on a single multiport card can't have two different interrupts. . MessageId=0x0022 Facility=Serial Severity=Informational SymbolicName=SERIAL_DISABLED_PORT Language=English Disabling %2 as requested by the configuration data. . MessageId=0x0023 Facility=Serial Severity=Error SymbolicName=SERIAL_GARBLED_PARAMETER Language=English Parameter %2 data is unretrievable from the registry. . MessageId=0x0024 Facility=Serial Severity=Error SymbolicName=SERIAL_DLAB_INVALID Language=English While validating that %2 was really a serial port, the contents of the divisor latch register was identical to the interrupt enable and the recieve registers. The device is assumed not to be a serial port and will be deleted. . MessageId=0x0025 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_MOXA_BOARDS Language=English Can not find any MOXA Smartio/Industio series board. . MessageId=0x0026 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_COM_NUMBER Language=English The COM number(COM %2) of the %3 board conflicts with others. . MessageId=0x0027 Facility=Serial Severity=Informational SymbolicName=SERIAL_PORT_FOUND Language=English Serial port %2, has been enabled. . MessageId=0x0028 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_IRQ_NUMBER Language=English %2, with first serial port %3, IRQ number is invalid. . MessageId=0x0029 Facility=Serial Severity=Error SymbolicName=SERIAL_INVALID_ASIC_BOARD Language=English Can not find the configured %2 board (CAP=%3)! . ;#endif /* _MXLOG_ */