[nls] ; ; These values are used by setupldr when starting text setup ; and by text setup to initialize nls values in the registry. ; ; For the codepage and UnicodeCasetable entries, the values are ; , pairs. Setupldr uses the first ; as the file to load for use during text setup. ; AnsiCodepage = c_1252.nls,1252 OemCodepage = c_850.nls,850,c_437.nls,437 MacCodepage = c_10000.nls,10000 UnicodeCasetable = l_intl.nls,040C OemHalFont = vga850.fon DefaultLayout = 0000040C [Keyboard] STANDARD = "Clavier XT, AT, ou ‚tendu (83-104 touches)",files.i8042,i8042prt kbdhid = "Clavier USB",files.kbdhid,kbdhid @i:USB = "Clavier USB",files.kbdhid,kbdhid @m:none = "Aucun clavier",files.none,"" [Files.BackupOnUpgrade] [Files.BackupOnOverwrite] [SystemPartitionFiles] @i:@@:bootfont.bin,"\" @a:@@:bootfont.bin,"\" ; ; This section provides information about hard disk drivers. ; ; The left hand side is a name in the \Driver directory in the NT ; \Driver object namespace. ; ; Value #0 is a format string used in creating the descriptive name ; of the disk. ; [DiskDriverMap] abiosdsk = "le disque Micro Channel de %1!u! Mo" atdisk = "le disque IDE/ESDI de %1!u! Mo" disk = "le disque %2!u! de %1!u! Mo ayant l'ID %3!u! du bus %4!u! sur %5" [ScsiClass] cdrom = "CD-ROM SCSI" floppy = "Disquette SCSI" disk = "Disque SCSI" ramdisk = "Pilote de disque RAM" [FileSystems] fat = "SystŠme de fichiers FAT" ntfs = "SystŠme de fichiers Windows NT (NTFS)" ksecdd = "Fournisseur de s‚curit‚ du noyau" [FloppyDrivers] floppy = "Disquette standard" fat = "SystŠme de fichiers FAT" [SystemPartitionFiles] @i:@@:Bootfont.bin,"\" [CdRomDrivers] cdfs = "SystŠme de fichiers CD-ROM" [MouseDrivers] mouclass = "Pilote de la classe de la souris" mouhid = "Pilote de filtre de la souris HID" ; ; Font list ; ; Setup will create an entry in the [Fonts] section of win.ini ; for each of the following fonts. (Fonts copied during GUI setup ; have entries in [FontList] in a gui inf file -- see eng_ansi.txt.) ; Note that the [fonts] section of win.ini is shadowed into ; HEKY_LOCAL_MACHINE\software\Microsoft\Windows NT\CurrentVersion\Fonts. ; [FontListE] "Courier 10,12,15 (VGA res)" = COURE.FON "MS Sans Serif 8,10,12,14,18,24 (VGA res)" = SSERIFE.FON "MS Serif 8,10,12,14,18,24 (VGA res)" = SERIFE.FON "Tahoma (TrueType)" = TAHOMA.TTF "Microsoft Sans Serif Regular (TrueType)" = MICROSS.TTF @*: @*: If add a keyboard layout dll description here make sure @*: that you add the layout dll file name in [CmdConsFiles] @*: section in dosnet.inf also, so that when command console @*: is installed on the harddisk that particular layout file @*: can be copied @*: ["Keyboard Layout"] 0000041C = "Albanais" 00000407 = "Allemand" 00010407 = "Allemand (IBM)" 00000807 = "Allemand - Suisse" 00001009 = "Anglais - Canada, Multilingue" 00000809 = "Anglais - R.U." 00000409 = "Anglais - E.U." 00010409 = "Anglais - E.U., Dvorak" 00040409 = "Anglais - E.U., Dvorak main droite" 00030409 = "Anglais - E.U., Dvorak main gauche" 00020409 = "Anglais - E.U., International" 00000423 = "Bi‚lorusse" 00000416 = "Br‚silien (ABNT)" 00000402 = "Bulgare" 00010402 = "Bulgare - latin" 0000041a = "Croate" 00000406 = "Danois" 0000040A = "Espagnol" 0000080A = "Espagnol - Am‚rique Latine" 0001040A = "Espagnol - Variation" 00000425 = "Estonien" 0000040B = "Finnois" 0000040C = "Fran‡ais" 0000080C = "Fran‡ais - Belgique" 00000C0C = "Fran‡ais - Canada" 00010C0C = "Fran‡ais - Canada, Multilingue" 0000100C = "Fran‡ais - Suisse" 00000408 = "Grec" 00050408 = "Grec latin" 00010408 = "Grec (220)" 00030408 = "Grec (220) latin" 00020408 = "Grec (319)" 00040408 = "Grec (319) latin" 0000040E = "Hongrois" 0001040E = "Hongrois 101 touches" 00001809 = "Irlandais" 0000040F = "Islandais" 00000410 = "Italien" 00010410 = "Italien (142)" 00000426 = "Letton" 00010426 = "Letton (QWERTY)" 00000427 = "Lituanien" 00000413 = "N‚erlandais" 00000813 = "N‚erlandais - Belgique" 00000414 = "Norv‚gien" 00000415 = "Polonais (programmeurs)" 00010415 = "Polonais (214)" 00000816 = "Portugais" 00000418 = "Roumain" 00000419 = "Russe" 00010419 = "Russe (machine … ‚crire)" 00000C1A = "Serbe cyrillique" 00010C1A = "Serbe Latin" 0000041B = "Slovaque" 0001041B = "Slovaque (QWERTY)" 00000424 = "SlovSne" 0000041D = "Su‚dois" 00000405 = "TchŠque" 00010405 = "TchŠque - latin" 0001041F = "Turc F" 0000041F = "Turc Q" 00000422 = "Ukrainien" [DiskDrivers] dmboot = "Prise en charge des volumes dynamiques (dmboot)" i2omgmt = "Pilote de prise en charge E/S Intelligent" [InputDevicesSupport] usbehci = "Contr“leur h“te am‚lior‚",files.usbehci,usbehci usbohci = "Contr“leur h“te ouvert",files.usbohci,usbohci usbuhci = "Contr“leur h“te universel",files.usbuhci,usbuhci usbhub = "Pilote de concentrateur USB g‚n‚rique",files.usbhub,usbhub hidusb = "Analyseur d'interface utilisateur",files.hidusb,hidusb serial = "Pilote de port s‚rie",files.none,serial serenum = "num‚rateur de port s‚rie",files.none,serenum usbstor = "Pilote de classe de stockage USB",files.usbstor,usbstor usbccgp = "Pilote parent g‚n‚rique USB",files.usbccgp,usbccgp @i:wd = "Pilote d'horloge Microsoft Watchdog",files.wd,wd [SCSI] @i:sparrow = "Carte SCSI Adaptec AHA-151X/AHA-152X/AIC-6X60" @i:aha154x = "Carte h“te SCSI Adaptec AHA-154X/AHA-164X" aic78xx = "Contr“leur SCSI Adaptec AHA-294X/AHA-394X/AIC-78XX" aic78u2 = "Contr“leur SCSI Adaptec AHA-294XU2/AIC-7890" adpu160m = "Carte SCSI Adaptec AIC-789X/AHA-3960 Ultra160 PCI" adpu320 = "Contr“leur SCSI Adaptec de la gamme Ultra320" afcnt = "Contr“leur Fibre optique Agilent HHBA-510x PCI" dpti2o = "Contr“leur RAID SCSI Adaptec 2000S/3000S Ultra160" @i:asc3550 = "Carte h“te SCSI Advansys 3550 Ultra Wide" @i:asc3350p = "Carte h“te SCSI Advansys ABP460 PCMCIA" @i:abp480n5 = "Carte h“te SCSI Advansys ABP480 CardBus" @i:asc = "Carte h“te SCSI Advansys" @i:amsint = "Contr“leur SCSI PCI AMD/Carte Ethernet" mraid35x = "Contr“leur RAID AMI MegaRaid" @i:cpqarray = "Batterie de disques Compaq" cpqfcalm = "Contr“leur h“te Compaq Fibre Channel" cpqarry2 = "Contr“leur Compaq Smart Array" cpqcissm = "Contr“leur Compaq Smart Array séries 53xx" lp6nds35 = "Cartes h“te Emulex LP6000 Fibre Channel" @i:cd20xrnt = "Lecteur CD-ROM PCMCIA IBM portable" @i:ipsraidn = "Carte IBM ServeRAID" nfrd960 = "Carte IBM ServeRAID" @i:i2omp = "Contr“leur Intelligent I/O" @i:iirsp = "Carte RAID Intel" atapi = "CD-ROM IDE (ATAPI 1.2)/Contr“leur IDE PCI" cbidf2k = "Pilote de miniport CardBus/PCMCIA IDE" @i:ini910u = "Carte h“te SCSI Initio Ultra" @i:dac2w2k = "Contr“leur RAID Mylex EXR2000,3000/AR160,170,352" dac960nt = "Contr“leur RAID Mylex DAC960/Digital SWXCR-Ex" @i:dellcerc = "Contr“leur RAID DELL CERC ATA 100/4ch" @i:ultra = "Contr“leur IDE Promise Technology Inc. Ultra IDE" @i:hpt3xx = "Contr“leur RAID HighPoint" ql1240 = "Carte h“te SCSI QLogic ISP 1240" ql10wnt = "Carte h“te SCSI PCI QLogic" ql1080 = "Qlogic QLA1080, 64 bits PCI LVD SCSI HBA" ql1280 = "Qlogic QLA1280, 64 bits PCI LVD SCSI HBA" ql12160 = "QLogic QLA12160, 64 bits PCI DUAL 160M SCSI HBA" ql2100 = "Carte QLogic QLA2000/QLA2100 PCI Fibre Channel" ql2200 = "Carte QLogic QLA2200 PCI Fibre Channel" ql2300 = "Carte QLogic QLA2300 PCI Fibre Channel" sym_hi = "Carte h“te SCSI LSI Logic C896 PCI" sym_u3 = "Carte h“te SCSI LSI Logic C1010 PCI" @i:symc810 = "Carte h“te SCSI LSI Logic C8100 PCI" symc8xx = "Carte h“te SCSI LSI Logic C8xx PCI" symmpi = "Carte h“te SCSI LSI Logic PCI Fibre Channel/LSI Logic PCI-X Ultra320" hpn = "Contr“leur RAID Hewlett Packard NetRAID-4M" perc2 = "Contr“leur RAID Dell PERC 2/3" perc2gat = "Contr“leur RAID Dell PERC 2/3 (Gatling)" [BootBusExtenders] pci = "Pilote de bus PCI",files.pci,pci acpi = "Pilote de bus Plug-and-Play ACPI",files.acpi,acpi isapnp = "Pilote de bus Plug-and-Play ISA",files.isapnp,isapnp acpiec = "Pilote de contr“leur int‚gr‚ ACPI",files.none,acpiec ohci1394 = "Pilote de port conforme OHCI bus IEEE 1394",files.ohci1394,ohci1394 [BusExtenders] pcmcia = "Prise en charge PCMCIA",files.pcmcia,pcmcia pciide = "Pilote de bus IDE PCI",files.pciide,pciide intelide = "Pilote de bus IDE Intel",files.intelide,intelide viaide = "Pilote de bus IDE VIA",files.viaide,viaide cmdide = "Pilote de bus IDE CMD",files.cmdide,cmdide toside = "Pilote de bus IDE Toshiba",files.toside,toside aliide = "Pilote de bus IDE ALI",files.aliide,aliide mountmgr = "Gestionnaire de point de montage",files.none,mountmgr ftdisk = "Gestionnaire de volume",files.none,ftdisk partmgr = "Gestionnaire de partition",files.none,partmgr volsnap = "Gestionnaire de clich‚ instantan‚ de volume",files.none,volsnap fdc = "Prise en charge de lecteur de disquettes",files.none,fdc dmload = "Prise en charge des volumes dynamiques (dmload)",files.none,dmload dmio = "Prise en charge des volumes dynamiques (dmio)",files.none,dmio sbp2port = "Pilote de port de stockage SBP2 IEEE 1394", files.sbp2port,sbp2port [Computer] @i:acpiapic_mp = "PC multiprocesseur ACPI",files.none @i:acpiapic_up = "PC monoprocesseur ACPI",files.none @a:acpiapic_mp = "Système multiprocesseur ACPI 64 bits x86",files.none @a:acpiapic_up = "Système monoprocesseur ACPI 64 bits x86",files.none @i:acpipic_up = "PC ACPI (Advanced Configuration and Power Interface)",files.none @i:mps_up = "PC monoprocesseur MPS",files.none @i:mps_mp = "PC multiprocesseur MPS",files.none @i:e_isa_up = "PC standard",files.none @m:acpipic_up = "ACPI UniProcessor ia64",files.none @m:acpipic_mp = "ACPI Multiprocessor ia64",files.none [Display] @i:forcevga = "VGA standard (640x480, 16 couleurs)",files.none @i:vga = "D‚tection automatique",files.none @@!i:vga = "Compatible VGA",files.none @i:sglfb = "Cobalt",files.sglfb [Mouse] @i:msps2 = "Souris du port souris Microsoft (y compris BallPoint)",files.i8042,i8042prt @i:lgps2 = "Souris du port souris Logitech",files.i8042,i8042prt @i:msbpser = "Souris s‚rie Microsoft BallPoint",files.sermouse,sermouse @i:lgser = "Souris s‚rie Logitech",files.sermouse,sermouse @@:none = "Aucune souris ou autre p‚riph‚rique de pointage",files.none,"" @@:mouhid = "Souris USB",files.mouhid,mouhid @@:msser = "Souris s‚rie Microsoft",files.sermouse,sermouse @@:ps2 = "Souris du port souris",files.i8042,i8042prt @@:sermouse = "Souris s‚rie",files.sermouse,sermouse @i:USB = "Souris USB",files.mouhid,mouhid @*: COMPAT: we purposely put two strings section in txtsetup.sif @*: The problem is that setupapi only reads strings from the first @*: strings section it encounters. Since older versions of the OS @*: accidentally had multiple Strings sections in the past, we make @*: Whistler have multiple strings sections so that older applications @*: (like win2k risetup) can read this file without requiring any change @*: The only string that risetup specifically cares about is whatever @*: LoadIdentifier points at, so you can probably safely add new strings @*: to this section. @*: @*: @*: The first strings section comes another one of the files that @*: builds txtsetup.sif [Strings] @@!m:@w!p:wks_id = "Microsoft Windows XP Professionnel" @a:@w!p:wks_id = "Windows XP 64 bits 2003" @m:@w!p:wks_id = "Windows XP 64 bits 2003" @@:@p:wks_id = "Microsoft Windows XP Édition familiale" @@:@s!e!b!l:srv_id = "Windows Server 2003, Standard" @@:@e!d:srv_id = "Windows Server 2003, Enterprise" @@:@d:srv_id = "Windows Server 2003, Datacenter" @@:@b:srv_id = "Windows Server 2003, Web" @@:@l:srv_id = "Windows Server 2003 for Small Business Server" @@!m:@w!p:wks_id_vga = "Microsoft Windows XP Professionnel [Mode VGA]" @a:@w!p:wks_id_vga = "Windows XP 64 bits 2003 [Mode VGA]" @m:@w!p:wks_id_vga = "Windows XP 64 bits 2003 [Mode VGA]" @@:@p:wks_id_vga = "Microsoft Windows XP Édition familiale [Mode VGA]" @@:@s!e!b!l:srv_id_vga = "Windows Server 2003, Standard [Mode VGA]" @@:@e!d:srv_id_vga = "Windows Server 2003, Enterprise [Mode VGA]" @@:@d:srv_id_vga = "Windows Server 2003, Datacenter [Mode VGA]" @@:@b:srv_id_vga = "Windows Server 2003, Web [Mode VGA]" @@:@l:srv_id_vga = "Windows Server 2003 for Small Business Server [Mode VGA]" @@:@w:cancel_id = "Annuler l'installation de Windows" @@:@w:9x_id = "Microsoft Windows"