[nls] ; ; These values are used by setupldr when starting text setup ; and by text setup to initialize nls values in the registry. ; ; For the codepage and UnicodeCasetable entries, the values are ; , pairs. Setupldr uses the first ; as the file to load for use during text setup. ; AnsiCodepage = c_1250.nls,1250 OemCodepage = c_852.nls,852,c_437.nls,437 MacCodepage = c_10029.nls,10029 UnicodeCasetable = l_intl.nls,0415 OemHalFont = vga852.fon DefaultLayout = 00000415 [Keyboard] STANDARD = "Klawiatura XT, AT lub rozszerzona (83-104 klawiszy)",files.i8042,i8042prt kbdhid = "Klawiatura USB",files.kbdhid,kbdhid @i:USB = "Klawiatura USB",files.kbdhid,kbdhid @m:none = "Bez klawiatury",files.none,"" [Files.BackupOnUpgrade] [Files.BackupOnOverwrite] [SystemPartitionFiles] @i:@@:bootfont.bin,"\" @a:@@:bootfont.bin,"\" ; ; This section provides information about hard disk drivers. ; ; The left hand side is a name in the \Driver directory in the NT ; \Driver object namespace. ; ; Value #0 is a format string used in creating the descriptive name ; of the disk. ; [DiskDriverMap] abiosdsk = "Dysk: %1!u! MB Micro Channel" atdisk = "Dysk: %1!u! MB IDE/ESDI" disk = "Dysk: %1!u! MB %2!u! o identyfikatorze %3!u!, magistrala %4!u! na %5" [ScsiClass] cdrom = "CD-ROM SCSI" floppy = "Stacja dyskietek SCSI" disk = "Dysk SCSI" ramdisk = "Sterownik dysku RAM" [FileSystems] fat = "System plikw FAT" ntfs = "System plikw Windows NT (NTFS)" ksecdd = "Dostawca zabezpiecze jdra" [FloppyDrivers] floppy = "Standardowa stacja dyskietek" fat = "System plikw FAT" [SystemPartitionFiles] @i:@@:Bootfont.bin,"\" [CdRomDrivers] cdfs = "System plikw CD-ROM" [MouseDrivers] mouclass = "Sterownik klasy myszy" mouhid = "Sterownik filtru myszy HID" ; ; Font list ; ; Setup will create an entry in the [Fonts] section of win.ini ; for each of the following fonts. (Fonts copied during GUI setup ; have entries in [FontList] in a gui inf file -- see eng_ansi.txt.) ; Note that the [fonts] section of win.ini is shadowed into ; HEKY_LOCAL_MACHINE\software\Microsoft\Windows NT\CurrentVersion\Fonts. ; [FontListE] "Courier 10,12,15 (VGA res)" = COUREE.FON "MS Sans Serif 8,10,12,14,18,24 (VGA res)" = SSERIFEE.FON "MS Serif 8,10,12,14,18,24 (VGA res)" = SERIFEE.FON "Tahoma (TrueType)" = TAHOMA.TTF "Microsoft Sans Serif (TrueType)" = MICROSS.TTF @*: @*: If add a keyboard layout dll description here make sure @*: that you add the layout dll file name in [CmdConsFiles] @*: section in dosnet.inf also, so that when command console @*: is installed on the harddisk that particular layout file @*: can be copied @*: ["Keyboard Layout"] 0000041C = "Albaski" 00000409 = "Amerykaski" 0000080A = "Amerykaski (Ameryka aciska)" 00030409 = "Amerykaski (Dvorak - dla leworcznych)" 00040409 = "Amerykaski (Dvorak - dla praworcznych)" 00010409 = "Amerykaski (Dvorak)" 00020409 = "Amerykaski (midzynarodowy)" 00000809 = "Angielski" 00000423 = "Biaoruski" 00000416 = "Brazylijski (ABNT)" 00000402 = "Bugarski" 00010402 = "Bugarski (aciski)" 0000041a = "Chorwacki" 00000405 = "Czeski" 00010405 = "Czeski (QWERTY)" 00000406 = "Duski" 00000425 = "Estoski" 0000040B = "Fiski" 0000040C = "Francuski" 0000080C = "Francuski (belgijski)" 0000100C = "Francuski (szwajcarski)" 00000408 = "Grecki" 00010408 = "Grecki (220)" 00030408 = "Grecki (220) (aciski)" 00020408 = "Grecki (319)" 00040408 = "Grecki (319) (aciski)" 00050408 = "Grecki (aciski)" 0000040A = "Hiszpaski" 0001040A = "Hiszpaski (odmiana)" 00000413 = "Holenderski" 00000813 = "Holenderski (belgijski)" 00001809 = "Irlandzki" 0000040F = "Islandzki" 00000C0C = "Kanadyjski (francuski)" 00001009 = "Kanadyjski wielojzyczny (angielski)" 00010C0C = "Kanadyjski wielojzyczny (francuski)" 00000427 = "Litewski" 00000426 = "otewski" 00010426 = "otewski (QWERTY)" 00000407 = "Niemiecki" 00010407 = "Niemiecki (IBM)" 00000807 = "Niemiecki (szwajcarski)" 00000414 = "Norweski" 00010415 = "Polski" 00000415 = "Polski (programisty)" 00000816 = "Portugalski" 00000419 = "Rosyjski" 00010419 = "Rosyjski (maszynistki)" 00000418 = "Rumuski" 00000C1A = "Serbski (cyrylica)" 00010C1A = "Serbski (aciski)" 0000041B = "Sowacki" 0001041B = "Sowacki (QWERTY)" 00000424 = "Soweski" 0000041D = "Szwedzki" 0001041F = "Turecki F" 0000041F = "Turecki Q" 00000422 = "Ukraiski" 0000040E = "Wgierski" 0001040E = "Wgierski 101 klawiszy" 00000410 = "Woski" 00010410 = "Woski (142)" [DiskDrivers] dmboot = "Obsuga woluminw dynamicznych (dmboot)" i2omgmt = "Inteligentny sterownik obsugi We/Wy" [InputDevicesSupport] usbehci = "Rozszerzony kontroler hosta",files.usbehci,usbehci usbohci = "Otwarty kontroler hosta",files.usbohci,usbohci usbuhci = "Uniwersalny kontroler hosta",files.usbuhci,usbuhci usbhub = "Rodzajowy sterownik koncentratora USB",files.usbhub,usbhub hidusb = "Parser interfejsu HID",files.hidusb,hidusb serial = "Sterownik portu szeregowego",files.none,serial serenum = "Modu wyliczania portw szeregowych",files.none,serenum usbstor = "Sterownik klasy magazynw USB",files.usbstor,usbstor usbccgp = "Sterownik rodzajowej magistrali nadrzdnej USB",files.usbccgp,usbccgp @i:wd = "Sterownik Microsoft Watchdog Timer",files.wd,wd [SCSI] @i:sparrow = "Adaptec AHA-151X/AHA-152X/AIC-6X60 SCSI Adapter" @i:aha154x = "Adaptec AHA-154X/AHA-164X SCSI Host Adapter" aic78xx = "Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller" aic78u2 = "Adaptec AHA-294XU2/AIC-7890 SCSI Controller" adpu160m = "Adaptec AIC-789X/AHA-3960 Ultra160 PCI SCSI Card" adpu320 = "Adaptec Ultra320 Family SCSI Controller" afcnt = "Agilent HHBA-510x PCI Fibre Channel Controller" dpti2o = "Adaptec 2000S/3000S Ultra160 SCSI RAID Controller" @i:asc3550 = "Advansys 3550 Ultra Wide SCSI Host Adapter" @i:asc3350p = "Advansys ABP460 PCMCIA SCSI Host Adapter" @i:abp480n5 = "Advansys ABP480 CardBus SCSI Host Adapter" @i:asc = "Advansys SCSI Host Adapter" @i:amsint = "AMD PCI SCSI Controller/Ethernet Adapter" mraid35x = "AMI MegaRaid RAID Controller" @i:cpqarray = "Compaq Drive Array" cpqfcalm = "Compaq Fibre Channel Host Controller" cpqarry2 = "Compaq Smart Array Controller" cpqcissm = "Compaq Smart Array 53xx-series Controller" lp6nds35 = "Emulex LP6000 Fibre Channel Host Adapters" @i:cd20xrnt = "IBM Portable PCMCIA CD-ROM Drive" @i:ipsraidn = "IBM ServeRAID Adapter" nfrd960 = "IBM ServeRAID Adapter" @i:i2omp = "Intelligent I/O Controller" @i:iirsp = "Intel RAID Adapter" atapi = "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" cbidf2k = "CardBus/PCMCIA IDE Miniport Driver" @i:ini910u = "Initio Ultra SCSI Host Adapter" @i:dac2w2k = "Mylex EXR2000,3000/AR160,170,352 Raid Controllers" dac960nt = "Mylex DAC960/Digital SWXCR-Ex Raid Controller" @i:dellcerc = "DELL CERC ATA 100/4ch RAID Controller" @i:ultra = "Promise Technology Inc. Ultra IDE Controller" @i:hpt3xx = "HighPoint RAID Controller" ql1240 = "QLogic ISP 1240 SCSI Host Adapter" ql10wnt = "QLogic PCI SCSI Host Adapter" ql1080 = "Qlogic QLA1080, 64 bit PCI LVD SCSI HBA" ql1280 = "Qlogic QLA1280, 64 bit PCI LVD SCSI HBA" ql12160 = "QLogic QLA12160, 64 bit PCI DUAL 160M SCSI HBA" ql2100 = "QLogic QLA2000/QLA2100 PCI Fibre Channel Adapter" ql2200 = "QLogic QLA2200 PCI Fibre Channel Adapter" ql2300 = "QLogic QLA2300 PCI Fibre Channel Adapter" sym_hi = "LSI Logic C896 PCI SCSI Host Adapter" sym_u3 = "LSI Logic C1010 PCI SCSI Host Adapter" @i:symc810 = "LSI Logic C8100 PCI SCSI Host Adapter" symc8xx = "LSI Logic C8xx PCI SCSI Host Adapter" symmpi = "LSI Logic PCI Fibre Channel/LSI Logic PCI-X Ultra320 SCSI Host Adapter" hpn = "Hewlett Packard NetRAID-4M RAID Controller" perc2 = "Dell PERC 2/3 RAID Controller" perc2gat = "Dell PERC 2/3 RAID Controller (Gatling)" [BootBusExtenders] pci = "Sterownik magistrali PCI",files.pci,pci acpi = "Sterownik magistrali Plug & Play ACPI",files.acpi,acpi isapnp = "Sterownik magistrali Plug & Play ISA",files.isapnp,isapnp acpiec = "Sterownik kontrolera osadzonego ACPI",files.none,acpiec ohci1394 = "Zgodny z OHCI sterownik portu magistrali IEEE 1394",files.ohci1394,ohci1394 [BusExtenders] pcmcia = "Obsuga PCMCIA ",files.pcmcia,pcmcia pciide = "Sterownik magistrali IDE PCI",files.pciide,pciide intelide = "Sterownik magistrali IDE Intel",files.intelide,intelide viaide = "Sterownik magistrali IDE VIA",files.viaide,viaide cmdide = "Sterownik magistrali IDE CMD",files.cmdide,cmdide toside = "Sterownik magistrali IDE Toshiba",files.toside,toside aliide = "Sterownik magistrali IDE ALI",files.aliide,aliide mountmgr = "Mount Point Manager",files.none,mountmgr ftdisk = "Meneder woluminw",files.none,ftdisk partmgr = "Meneder partycji",files.none,partmgr volsnap = "Volume Shadow Copy Manager",files.none,volsnap fdc = "Obsuga stacji dyskietek",files.none,fdc dmload = "Obsuga woluminw dynamicznych (dmload)",files.none,dmload dmio = "Obsuga woluminw dynamicznych (dmio)",files.none,dmio sbp2port = "Sterownik portu urzdze IEEE 1394 SBP2", files.sbp2port,sbp2port [Computer] @i:acpiapic_mp = "Wieloprocesorowy komputer PC ACPI",files.none @i:acpiapic_up = "Jednoprocesorowy komputer PC ACPI",files.none @a:acpiapic_mp = "Wieloprocesorowy komputer x86-64 ACPI",files.none @a:acpiapic_up = "Jednoprocesorowy komputer x86-64 ACPI",files.none @i:acpipic_up = "Komputer PC ACPI (Advanced Configuration and Power Interface)",files.none @i:mps_up = "Jednoprocesorowy komputer PC MPSI",files.none @i:mps_mp = "Wieloprocesorowy komputer PC MPSI",files.none @i:e_isa_up = "Standardowy komputer PC",files.none @m:acpipic_up = "Jednoprocesorowy komputer ia64 ACPI",files.none @m:acpipic_mp = "Wieloprocesorowy komputer ia64 ACPI",files.none [Display] @i:forcevga = "Standardowy VGA (640x480, 16 kolorw)",files.none @i:vga = "Wykryj automatycznie",files.none @@!i:vga = "Zgodny z VGA",files.none @i:sglfb = "Cobalt",files.sglfb [Mouse] @i:msps2 = "Mysz Microsoft Mouse Port (zawiera BallPoint)",files.i8042,i8042prt @i:lgps2 = "Mysz Logitech Mouse Port",files.i8042,i8042prt @i:msbpser = "Mysz szeregowa Microsoft BallPoint",files.sermouse,sermouse @i:lgser = "Mysz szeregowa Logitech",files.sermouse,sermouse @@:none = "Brak myszy lub innego urzdzenia wskazujcego",files.none,"" @@:mouhid = "Mysz USB",files.mouhid,mouhid @@:msser = "Mysz szeregowa Microsoft",files.sermouse,sermouse @@:ps2 = "Mysz Mouse Port",files.i8042,i8042prt @@:sermouse = "Mysz szeregowa",files.sermouse,sermouse @i:USB = "Mysz USB",files.mouhid,mouhid @*: COMPAT: we purposely put two strings section in txtsetup.sif @*: The problem is that setupapi only reads strings from the first @*: strings section it encounters. Since older versions of the OS @*: accidentally had multiple Strings sections in the past, we make @*: Whistler have multiple strings sections so that older applications @*: (like win2k risetup) can read this file without requiring any change @*: The only string that risetup specifically cares about is whatever @*: LoadIdentifier points at, so you can probably safely add new strings @*: to this section. @*: @*: @*: The first strings section comes another one of the files that @*: builds txtsetup.sif [Strings] @@!m:@w!p:wks_id = "Microsoft Windows XP Professional" @a:@w!p:wks_id = "Windows XP 64-Bit 2003" @m:@w!p:wks_id = "Windows XP 64-Bit 2003" @@:@p:wks_id = "Microsoft Windows XP Home Edition" @@:@s!e!b!l:srv_id = "Windows Server 2003, Standard" @@:@e!d:srv_id = "Windows Server 2003, Enterprise" @@:@d:srv_id = "Windows Server 2003, Datacenter" @@:@b:srv_id = "Windows Server 2003, Web" @@:@l:srv_id = "Windows Server 2003 for Small Business Server" @@!m:@w!p:wks_id_vga = "Microsoft Windows XP Professional [tryb VGA]" @a:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [tryb VGA]" @m:@w!p:wks_id_vga = "Windows XP 64-Bit 2003 [tryb VGA]" @@:@p:wks_id_vga = "Microsoft Windows XP Home Edition [tryb VGA]" @@:@s!e!b!l:srv_id_vga = "Windows Server 2003, Standard [tryb VGA]" @@:@e!d:srv_id_vga = "Windows Server 2003, Enterprise [tryb VGA]" @@:@d:srv_id_vga = "Windows Server 2003, Datacenter [tryb VGA]" @@:@b:srv_id_vga = "Windows Server 2003, Web [tryb VGA]" @@:@l:srv_id_vga = "Windows Server 2003 for Small Business Server [tryb VGA]" @@:@w:cancel_id = "Anuluj instalacj systemu Windows XP" @@:@w:9x_id = "Microsoft Windows"