/*
 ************************************************************************
 *
 *	INIT.C
 *
 *
 * Portions Copyright (C) 1996-2001 National Semiconductor Corp.
 * All rights reserved.
 * Copyright (C) 1996-2001 Microsoft Corporation. All Rights Reserved.
 *
 *
 *
 *************************************************************************
 */


    #include "nsc.h"
    #include "newdong.h"
#include "init.tmh"


    #define  SIR      0
    #define  MIR      1
    #define  FIR      2




    #define NSC_DEMO_IRDA_SPEEDS ( NDIS_IRDA_SPEED_2400    |	   \
				   NDIS_IRDA_SPEED_2400    |	   \
				   NDIS_IRDA_SPEED_9600    |	   \
				   NDIS_IRDA_SPEED_19200   |	   \
				   NDIS_IRDA_SPEED_38400   |	   \
				   NDIS_IRDA_SPEED_57600   |	   \
				   NDIS_IRDA_SPEED_115200  |	   \
				   NDIS_IRDA_SPEED_1152K   |	   \
				   NDIS_IRDA_SPEED_4M )


    //	NSC PC87108 index registers.  See the spec for more info.
    //
    enum indexRegs {
	    BAIC_REG	    = 0,
	    CSRT_REG	    = 1,
	    MCTL_REG	    = 2,
	    GPDIR_REG	    = 3,
	    GPDAT_REG	    = 4
    };

#define CS_MODE_CONFIG_OFFSET 0x8

const UCHAR bankCode[] = { 0x03, 0x08, 0xE0, 0xE4, 0xE8, 0xEC, 0xF0, 0xF4 };

//////////////////////////////////////////////////////////////////////////
//									//
// Function :	   NSC_WriteBankReg					//
//									//
// Description: 							//
//  Write a value to the specified register of the specified register	//
//  bank.								//
//									//
//////////////////////////////////////////////////////////////////////////

void NSC_WriteBankReg(PUCHAR comBase, UINT bankNum, UINT regNum, UCHAR val)
{
    NdisRawWritePortUchar(comBase+3, bankCode[bankNum]);
    NdisRawWritePortUchar(comBase+regNum, val);

    // Always switch back to reg 0
    NdisRawWritePortUchar(comBase+3, bankCode[0]);
}

//////////////////////////////////////////////////////////////////////////
//									//
// Function :	   NSC_ReadBankReg					//
//									//
// Description: 							//
//  Write the value from the specified register of the specified	//
//  register bank.							//
//									//
//////////////////////////////////////////////////////////////////////////


UCHAR NSC_ReadBankReg(PUCHAR comBase, UINT bankNum, UINT regNum)
{
    UCHAR result;

    NdisRawWritePortUchar(comBase+3, bankCode[bankNum]);
    NdisRawReadPortUchar(comBase+regNum, &result);

    // Always switch back to reg 0
    NdisRawWritePortUchar(comBase+3, bankCode[0]);
		
    return result;
}

typedef struct _SYNC_PORT_ACCESS {

    PUCHAR    PortBase;
    UINT      BankNumber;
    UINT      RegisterIndex;
    UCHAR     Value;

} SYNC_PORT_ACCESS, *PSYNC_PORT_ACCESS;


VOID
ReadBankReg(
    PVOID     Context
    )

{
    PSYNC_PORT_ACCESS       PortAccess=(PSYNC_PORT_ACCESS)Context;

    NdisRawWritePortUchar(PortAccess->PortBase+3, bankCode[PortAccess->BankNumber]);
    NdisRawReadPortUchar(PortAccess->PortBase+PortAccess->RegisterIndex, &PortAccess->Value);

    // Always switch back to reg 0
    NdisRawWritePortUchar(PortAccess->PortBase+3, bankCode[0]);

    return;

}



VOID
WriteBankReg(
    PVOID     Context
    )

{
    PSYNC_PORT_ACCESS       PortAccess=(PSYNC_PORT_ACCESS)Context;

    NdisRawWritePortUchar(PortAccess->PortBase+3, bankCode[PortAccess->BankNumber]);
    NdisRawWritePortUchar(PortAccess->PortBase+PortAccess->RegisterIndex, PortAccess->Value);

    // Always switch back to reg 0
    NdisRawWritePortUchar(PortAccess->PortBase+3, bankCode[0]);

    return;

}


VOID
SyncWriteBankReg(
    PNDIS_MINIPORT_INTERRUPT InterruptObject,
    PUCHAR                   PortBase,
    UINT                     BankNumber,
    UINT                     RegisterIndex,
    UCHAR                    Value
    )

{
    SYNC_PORT_ACCESS        PortAccess;

    ASSERT(BankNumber <= 7);
    ASSERT(RegisterIndex <= 7);

    PortAccess.PortBase     = PortBase;
    PortAccess.BankNumber   = BankNumber;
    PortAccess.RegisterIndex= RegisterIndex;

    PortAccess.Value        = Value;

    NdisMSynchronizeWithInterrupt(
        InterruptObject,
        WriteBankReg,
        &PortAccess
        );

    return;
}

UCHAR
SyncReadBankReg(
    PNDIS_MINIPORT_INTERRUPT InterruptObject,
    PUCHAR                   PortBase,
    UINT                     BankNumber,
    UINT                     RegisterIndex
    )

{
    SYNC_PORT_ACCESS        PortAccess;

    ASSERT(BankNumber <= 7);
    ASSERT(RegisterIndex <= 7);


    PortAccess.PortBase     = PortBase;
    PortAccess.BankNumber   = BankNumber;
    PortAccess.RegisterIndex= RegisterIndex;

    NdisMSynchronizeWithInterrupt(
        InterruptObject,
        ReadBankReg,
        &PortAccess
        );

    return PortAccess.Value;
}



BOOLEAN
SyncGetDongleCapabilities(
    PNDIS_MINIPORT_INTERRUPT InterruptObject,
    UIR * Com,
    DongleParam *Dingle
    )

{
    SYNC_DONGLE    Dongle;

    Dongle.Com=Com;
    Dongle.Dingle=Dingle;

    NdisMSynchronizeWithInterrupt(
        InterruptObject,
        GetDongleCapabilities,
        &Dongle
        );

    return TRUE;

}


UINT
SyncSetDongleCapabilities(
    PNDIS_MINIPORT_INTERRUPT InterruptObject,
    UIR * Com,
    DongleParam *Dingle
    )

{
    SYNC_DONGLE    Dongle;

    Dongle.Com=Com;
    Dongle.Dingle=Dingle;


    NdisMSynchronizeWithInterrupt(
        InterruptObject,
        SetDongleCapabilities,
        &Dongle
        );

    return 0;

}


typedef struct _SYNC_FIFO_STATUS {

    PUCHAR     PortBase;
    PUCHAR     Status;
    PULONG     Length;

} SYNC_FIFO_STATUS, *PSYNC_FIFO_STATUS;

VOID
GetFifoStatus(
    PVOID     Context
    )

{
    PSYNC_FIFO_STATUS   FifoStatus=Context;

    NdisRawWritePortUchar(FifoStatus->PortBase+3, bankCode[5]);

    NdisRawReadPortUchar(FifoStatus->PortBase+FRM_ST, FifoStatus->Status);

    *FifoStatus->Length=0;

    if (*FifoStatus->Status & ST_FIFO_VALID) {

        UCHAR     High;
        UCHAR     Low;

        NdisRawReadPortUchar(FifoStatus->PortBase+RFRL_L, &Low);
        NdisRawReadPortUchar(FifoStatus->PortBase+RFRL_H, &High);

        *FifoStatus->Length =  Low;
        *FifoStatus->Length |= (ULONG)High << 8;
    }

    NdisRawWritePortUchar(FifoStatus->PortBase+3, bankCode[0]);

}

BOOLEAN
SyncGetFifoStatus(
    PNDIS_MINIPORT_INTERRUPT InterruptObject,
    PUCHAR                   PortBase,
    PUCHAR                   Status,
    PULONG                   Size
    )

{

    SYNC_FIFO_STATUS   FifoStatus;

    FifoStatus.PortBase=PortBase;
    FifoStatus.Status=Status;
    FifoStatus.Length=Size;

    NdisMSynchronizeWithInterrupt(
        InterruptObject,
        GetFifoStatus,
        &FifoStatus
        );

    return (*Status & ST_FIFO_VALID);

}


//////////////////////////////////////////////////////////////////////////
//									//
// Function :	   Ir108ConfigWrite					//
//									//
// Description: 							//
//  Write the data in the indexed register of the configuration I/O.	//
//									//
//////////////////////////////////////////////////////////////////////////

void Ir108ConfigWrite(PUCHAR configIOBase, UCHAR indexReg, UCHAR data, BOOLEAN CSMode)
{
    UCHAR IndexStore;

    if (CSMode)
    {
        NdisRawWritePortUchar(configIOBase+indexReg, data);
        NdisRawWritePortUchar(configIOBase+indexReg, data);
    }
    else
    {
        NdisRawReadPortUchar(configIOBase, &IndexStore);
        NdisRawWritePortUchar(configIOBase, indexReg);
        NdisRawWritePortUchar(configIOBase+1, data);
        NdisRawWritePortUchar(configIOBase+1, data);
        NdisRawWritePortUchar(configIOBase, IndexStore);
    }
}

//////////////////////////////////////////////////////////////////////////
//									//
// Function :	   Ir108ConfigRead					//
//									//
// Description: 							//
//  Read the data in the indexed register of the configuration I/O.	//
//									//
//////////////////////////////////////////////////////////////////////////

UCHAR Ir108ConfigRead(PUCHAR  configIOBase, UCHAR indexReg, BOOLEAN CSMode)
{
    UCHAR data,IndexStore;

    if (CSMode)
    {
        NdisRawReadPortUchar(configIOBase+indexReg, &data);
    }
    else
    {
        NdisRawReadPortUchar(configIOBase, &IndexStore);
        NdisRawWritePortUchar(configIOBase, indexReg);
        NdisRawReadPortUchar(configIOBase+1, &data);
        NdisRawWritePortUchar(configIOBase, IndexStore);
    }
    return (data);
}

//////////////////////////////////////////////////////////////////////////
//									//
// Function :	   NSC_DEMO_Init					//
//									//
// Description: 							//
//  Set up configuration registers for NSC evaluation board.		//
//									//
// NOTE:								//
//  Assumes configuration registers are at I/O addr 0x398.		//
//  This function configures the demo board to make the SIR UART appear //
//  at <comBase>.							//
//									//
//  Called By:								//
//  OpenCom								//
//////////////////////////////////////////////////////////////////////////

BOOLEAN NSC_DEMO_Init(IrDevice *thisDev)
{
    UCHAR val;
    UCHAR FifoClear;
    BOOLEAN CSMode = FALSE;
    switch(thisDev->CardType){
    case PUMA108:
        CSMode = TRUE;
        thisDev->portInfo.ConfigIoBaseAddr = thisDev->portInfo.ioBase + CS_MODE_CONFIG_OFFSET;

	case PC87108:
	    // Look for id at startup.
        if (!CSMode)
        {
            NdisRawReadPortUchar(thisDev->portInfo.ConfigIoBaseAddr, &val);
            if (val != 0x5A){
                if (val == (UCHAR)0xff){
                    DBGERR(("didn't see PC87108 id (0x5A); got ffh."));
                    return FALSE;
                }
                else {
                    //	ID only appears once, so in case we're resetting,
                    //	don't fail if we don't see it.
                    DBGOUT(("WARNING: didn't see PC87108 id (0x5A); got %xh.",
                         (UINT)val));
                }
            }
        }

        if (CSMode)
        {
            // base address ignored.
            val = 0;
        }
        else
        {
            // Select the base address for the UART
            switch ((DWORD_PTR)thisDev->portInfo.ioBase){
            case 0x3E8:	    val = 0;	    break;
            case 0x2E8:	    val = 1;	    break;
            case 0x3F8:	    val = 2;	    break;
            case 0x2F8:	    val = 3;	    break;
            default:	    return FALSE;
            }
        }
	    val |= 0x04;	// enable register banks
	    val |= 0x10;	// Set the interrupt line to Totempole output.
        Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, BAIC_REG, val, CSMode);

	    //	 Select interrupt level according to base address,
	    //	 following COM port mapping.
	    //	 Also select MIR/FIR DMA channels for rcv and xmit.
	    //
	    switch (thisDev->portInfo.irq){
		case 3:     val = 1;	    break;
		case 4:     val = 2;	    break;
		case 5:     val = 3;	    break;
		case 7:     val = 4;	    break;
		case 9:     val = 5;	    break;
		case 11:    val = 6;	    break;
		case 15:    val = 7;	    break;
		default:    return FALSE;
	    }

	    switch (thisDev->portInfo.DMAChannel){
		case 0: 		    val |= 0x08;    break;
		case 1: 		    val |= 0x10;    break;
		case 3: 		    val |= 0x18;    break;
		default:
		    DBGERR(("Bad rcv dma channel in NSC_DEMO_Init"));
		    return FALSE;
	    }

	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, CSRT_REG, val, CSMode);

	    // Select device-enable and normal-operating-mode.
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, MCTL_REG, (UCHAR)3, CSMode);
	    break;

/*
	case PC87307:
	    //
	    //	Select Logical Device 5
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x7, 0x5);

	    // Disable IO check
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0x31,0x0);

	    // Config Base address low and high.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x61,(UCHAR)(thisDev->portInfo.ioBase));
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x60,(UCHAR)(thisDev->portInfo.ioBase >> 8));

	    // Set IRQ
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x70,(UCHAR)thisDev->portInfo.irq);
			
	    // Enable Bank Select
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0xF0,0x82);

	    // Enable UIR
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0x30,0x1);
	    break;

*/
	case PC87308:

	    //	Select Logical Device 5
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x7, 0x5, FALSE);
			
	    // Disable IO check
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0x31,0x0, FALSE);

	    // Config Base address low and high.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x61,(UCHAR)(thisDev->portInfo.ioBasePhys), FALSE);
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x60,(UCHAR)(thisDev->portInfo.ioBasePhys >> 8), FALSE);

	    // Set IRQ
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x70,(UCHAR)thisDev->portInfo.irq, FALSE);
			
	    // Select DMA Channel
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,
			     0x74,thisDev->portInfo.DMAChannel, FALSE);

	    // DeSelect TXDMA Channel
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0x75,0x4, FALSE);

	    // Enable Bank Select
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0xF0,0x82, FALSE);


	    // Enable UIR
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr,0x30,0x1, FALSE);
	    break;

	case PC87338:
	    // Select Plug and Play mode.
	    val = Ir108ConfigRead(thisDev->portInfo.ConfigIoBaseAddr, 0x1B, FALSE);
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x1B,
			     (UCHAR)(val | 0x08), FALSE);

	    // Write the new Plug and Play UART IOBASE register.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x46,
			     (UCHAR)((thisDev->portInfo.ioBasePhys>>2) & 0xfe), FALSE);
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x47,
			     (UCHAR)((thisDev->portInfo.ioBasePhys>>8) & 0xfc), FALSE);

	    // Enable 14 Mhz clock + Clk Multiplier
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x51, 0x04, FALSE);

	    // Get Interrup line and shift it four bits;
	    //
	    val = thisDev->portInfo.irq << 4;

	    // Read the Current Plug and Play Configuration 1 register.
	    //
	    val |= Ir108ConfigRead(thisDev->portInfo.ConfigIoBaseAddr,0x1C, FALSE);
		
	    // Write the New Plug and Play Configuration 1 register.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x1C, val, FALSE);
			
	    // Setup 338 DMA.
	    //
	    switch (thisDev->portInfo.DMAChannel){
		case 0: 		val = 0x01;	break;
		case 1: 		val = 0x02;	break;
		case 2: 		val = 0x03;	break;
		case 3:

		    // Read the Current Plug and Play Configuration 3 register.
		    //
		    val = Ir108ConfigRead(
				thisDev->portInfo.ConfigIoBaseAddr,0x50, FALSE) | 0x01;

		    // Write the new Plug and Play Configuration 3 register.
		    //
		    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x50,
				     val, FALSE);

		    // Read the Current Plug and Play Configuration 3 register.
		    //
		    val = Ir108ConfigRead(
			       thisDev->portInfo.ConfigIoBaseAddr,0x4C, FALSE) | 0x80;

		    // Write the new Plug and Play Configuration 3 register.
		    //
		    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x4C,
				     val, FALSE);
		    val = 0x04;
		    break;

		default:
		    DBGERR(("Bad rcv dma channel in NSC_DEMO_Init"));
		    return FALSE;
	    }

	    // Write the new Plug and Play Configuration 3 register.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x4F, val, FALSE);

	    // Read the Current SuperI/O Configuration Register 2 register.
	    //
	    val = Ir108ConfigRead(thisDev->portInfo.ConfigIoBaseAddr,0x40, FALSE);

	    // Set up UIR/UART2 for Normal Power Mode and Bank select enable.
	    //
	    val |= 0xE0;

	    // Write the New SuperI/O Configuration Register 2 register.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x40, val, FALSE);


	    // Read the Current SuperI/O Configuration Register 3 register.
	    //
	    val = Ir108ConfigRead(thisDev->portInfo.ConfigIoBaseAddr,0x50, FALSE);

	    // Set up UIR/UART2 IRX line
	    //
	    val |= 0x0C;

	    // Write the New SuperI/O Configuration Register 3 register.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x50, val, FALSE);
		
	    // Set the SIRQ1 int to DRQ3 ??? only for EB
	    //val = Ir108ConfigRead(thisDev->portInfo.ConfigIoBaseAddr,0x4c) & 0x3f;
	    //Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x4c, val | 0x80);


	    // Read the Current Function Enable register.
	    //
	    val = Ir108ConfigRead(thisDev->portInfo.ConfigIoBaseAddr,0x00, FALSE);

	    // Enable UIR/UART2.
	    //
	    val |= 0x04;

	    // Write the New Function Enable register.
	    //
	    Ir108ConfigWrite(thisDev->portInfo.ConfigIoBaseAddr, 0x00, val, FALSE);
	    break;


    } // End of Evaluation board configuration setction.

    thisDev->UIR_ModuleId = NSC_ReadBankReg(thisDev->portInfo.ioBase, 3, 0);

    if (thisDev->UIR_ModuleId<0x20)
    {
        // Older revs of the NSC hardware seem to handle 1MB really poorly.
        thisDev->AllowedSpeedMask &= ~NDIS_IRDA_SPEED_1152K;
    }

    // The UART doesn't appear until we clear and set the FIFO control
    // register.

    NdisRawWritePortUchar(thisDev->portInfo.ioBase+2, (UCHAR)0x00);
    NdisRawWritePortUchar(thisDev->portInfo.ioBase+2, (UCHAR)0x07);

    // Set FIR CRC to 32 bits.
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 6, 0, 0x20);

    // Switch to bank 5
    // clear the status FIFO
    //
    NdisRawWritePortUchar(thisDev->portInfo.ioBase+3, (UCHAR)0xEC);
    FifoClear = 8;
    do {
	NdisRawReadPortUchar(thisDev->portInfo.ioBase+6, &val);
	NdisRawReadPortUchar(thisDev->portInfo.ioBase+7, &val);
	NdisRawReadPortUchar(thisDev->portInfo.ioBase+5, &val);
	FifoClear--;
    } while( (val & 0x80) && (FifoClear > 0) );

    // Test for newer silicon for support of Frame stop mode

#if 0
    if (thisDev->UIR_Mid < 0x16)
	// Change Bit 1 to Default 1
	//  0x40 -> 0x42
#endif
	NSC_WriteBankReg(thisDev->portInfo.ioBase, 5, 4, 0x40);
#if 0  // Since we're not currently using the multi-packet send, we don't use frame stop mode.
    else
	//
	// Set FIFO threshold and TX_MS Tx frame end stop mode.
	//
	// Change Bit 1 to Default 1
	//	0x68 -> 0x6a
	NSC_WriteBankReg(thisDev->portInfo.ioBase, 5, 4, 0x60);
#endif

    // Set SIR mode in IRCR1.
    // Enable SIR infrared mode in the Non-Extended mode of operation
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 4, 2, 0x0C);

    // Set max xmit frame size.
    // Need to set value slightly larger so that counter never
    // reaches 0.
    //
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 4, 4,
			 (UCHAR)(MAX_NDIS_DATA_SIZE+1));
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 4, 5,
			 (UCHAR)((MAX_NDIS_DATA_SIZE+1) >> 8));

    // Set max rcv frame size.
    // Need to set value slightly larger so that counter never
    // reaches 0.
    //
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 4, 6,
			 (UCHAR)(MAX_RCV_DATA_SIZE+FAST_IR_FCS_SIZE));
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 4, 7,
			 (UCHAR)((MAX_RCV_DATA_SIZE+FAST_IR_FCS_SIZE) >> 8));

    // Set extended mode
    //
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 2, 2, 0x03);

    // Set 32-bit FIFOs
    //
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 2, 4, 0x05);

    // Enable and reset FIFO's and set the receive FIF0
    // equal to the receive DMA threshold. See if DMA
    // is fast enough for device.
    //
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 0, 2, 0x07);

    // Restore to Non-Extended mode
    //
    NSC_WriteBankReg(thisDev->portInfo.ioBase, 2, 2, 0x02);


    thisDev->portInfo.hwCaps.supportedSpeedsMask = NSC_DEMO_IRDA_SPEEDS;
    thisDev->portInfo.hwCaps.turnAroundTime_usec = DEFAULT_TURNAROUND_usec;
    thisDev->portInfo.hwCaps.extraBOFsRequired = 0;

    // Initialize thedongle structure before calling
    // GetDongleCapabilities and SetDongleCapabilities for dongle 1.
    //
    thisDev->currentDongle = 1;
    thisDev->IrDongleResource.Signature = thisDev->DongleTypes[thisDev->currentDongle];

    thisDev->IrDongleResource.ComPort = thisDev->portInfo.ioBase;
    thisDev->IrDongleResource.ModeReq = SIR;
    thisDev->IrDongleResource.XcvrNum = thisDev->currentDongle;

//    IrDongle = GetDongleCapabilities(thisDev->IrDongleResource);
    SyncGetDongleCapabilities(&thisDev->interruptObj,&thisDev->IrDongleResource,&thisDev->Dingle[0]);

    // Initialize thedongle structure before calling
    // GetDongleCapabilities and SetDongleCapabilities for dongle 0.
    //
    thisDev->currentDongle = 0;
    thisDev->IrDongleResource.Signature = thisDev->DongleTypes[thisDev->currentDongle];

    thisDev->IrDongleResource.ComPort = thisDev->portInfo.ioBase;
    thisDev->IrDongleResource.ModeReq = SIR;
    thisDev->IrDongleResource.XcvrNum = 0;

//    IrDongle = GetDongleCapabilities(IrDongleResource);
    SyncGetDongleCapabilities(&thisDev->interruptObj,&thisDev->IrDongleResource,&thisDev->Dingle[0]);

    SyncSetDongleCapabilities(&thisDev->interruptObj,&thisDev->IrDongleResource,&thisDev->Dingle[0]);
	
    return TRUE;
}

#if 1
//////////////////////////////////////////////////////////////////////////
//									//
// Function:	NSC_DEMO_Deinit 					//
//									//
//  DUMMY ROUTINE							//
//////////////////////////////////////////////////////////////////////////

VOID NSC_DEMO_Deinit(PUCHAR comBase, UINT context)
{
		
}
#endif
//////////////////////////////////////////////////////////////////////////
//									//
// Function:	NSC_DEMO_SetSpeed					//
//									//
// Description: 							//
//  Set up the size of FCB, the timer, FIFO, DMA and the IR mode/dongle //
//  speed based on the negotiated speed.				//
//									//
//////////////////////////////////////////////////////////////////////////

BOOLEAN NSC_DEMO_SetSpeed(
    IrDevice *thisDev,
    PUCHAR comBase,
    UINT bitsPerSec,
    UINT context)
{
    NDIS_STATUS stat;
    UINT fcsSize;

    LOG("==>NSC_DEMO_SetSpeed %d",bitsPerSec);

    if (thisDev->FirReceiveDmaActive) {

        thisDev->FirReceiveDmaActive=FALSE;
        //
        //  receive dma is running, stop it
        //
        CompleteDmaTransferFromDevice(
            &thisDev->DmaUtil
            );

    }


    // Make sure the previous packet completely sent out(Not in the TX FIFO)
    // and Txmitter is empty
    // before the bandwidth control



    while((SyncReadBankReg(&thisDev->interruptObj, comBase, 0, 5)& 0x60) != 0x60);

    //

    if (bitsPerSec > 115200){

    	fcsSize = (bitsPerSec >= MIN_FIR_SPEED) ?
    		   FAST_IR_FCS_SIZE : MEDIUM_IR_FCS_SIZE;

    	if(bitsPerSec >= MIN_FIR_SPEED)
    	    thisDev->IrDongleResource.ModeReq = FIR;
    	else
    	    thisDev->IrDongleResource.ModeReq = MIR;

    	SyncSetDongleCapabilities(&thisDev->interruptObj,&thisDev->IrDongleResource,&thisDev->Dingle[0]);


    	// Set extended mode and set DMA fairness.
    	//
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 2, 2, 0x03);

    	if (thisDev->UIR_ModuleId < 0x16){

    	    //	Set Timer registers.
    	    //
    	    SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 0, (UCHAR)0x2);
    	    SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 1, (UCHAR)0x0);
    	}
    	else {

    	    //	Set Timer registers timer has 8 times finer
    	    //	resolution.
    	    //
            SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 0, (UCHAR)(TIMER_PERIODS & 0xff));
            SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 1, (UCHAR)(TIMER_PERIODS >> 8));

    	}

    	// Set max rcv frame size.
    	// Need to set value slightly larger so that counter never reaches 0.
    	//
    	DBGERR(("Programming Max Receive Size registers with %d Bytes ",
    						 MAX_RCV_DATA_SIZE+fcsSize));
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 6, (UCHAR)(MAX_RCV_DATA_SIZE+fcsSize));
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 7,
    				 (UCHAR)((MAX_RCV_DATA_SIZE+fcsSize) >> 8));


    	// Reset Timer Enable bit.
    	//
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 2, 0x00);

    	// Set MIR/FIR mode and DMA enable
    	//
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 0, 4,
    			 (UCHAR)((bitsPerSec >= 4000000) ? 0xA4 : 0x84));

    	DBGERR(("EXCR2= 0x%x",SyncReadBankReg(&thisDev->interruptObj,thisDev->portInfo.ioBase, 2, 4)));

    	// Set 32-bit FIFOs
    	//
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 2, 4, 0x05);
    	DBGERR(("EXCR2= 0x%x",SyncReadBankReg(&thisDev->interruptObj,thisDev->portInfo.ioBase, 2, 4)));

    	//
    	// We may start receiving immediately so setup the
    	// receive DMA
    	//


#if 0
    	// First, tear down any existing DMA
    	if (thisDev->FirAdapterState==ADAPTER_RX) {

            thisDev->FirAdapterState=ADAPTER_NONE;

            CompleteDmaTransferFromDevice(
                &thisDev->DmaUtil
                );
    	}

        FindLargestSpace(thisDev, &thisDev->rcvDmaOffset, &thisDev->rcvDmaSize);

    	SetupRecv(thisDev);


    	// Set the interrupt mask to interrupt on the
    	// first packet received.
    	//
    	thisDev->IntMask = 0x04;
    	DBGOUT(("RxDMA = ON"));
#endif
    }
    else {

    	// Set SIR mode in UART before setting the timing of transciever
    	//

    	// Set SIR mode
    	//
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 4, 2, 0x0C);

    	// Must set SIR Pulse Width Register to 0 (3/16) as default
    	// Bug in 338/108
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 6, 2, 0x0);

    	// Clear extended mode
    	//
    	SyncWriteBankReg(&thisDev->interruptObj, comBase, 2, 2, 0x00);


    	thisDev->IrDongleResource.ModeReq = SIR;
    	SyncSetDongleCapabilities(&thisDev->interruptObj,&thisDev->IrDongleResource,&thisDev->Dingle[0]);


    	// Clear Line and Auxiluary status registers.
    	//
    	SyncReadBankReg(&thisDev->interruptObj, comBase, 0, 5);
    	SyncReadBankReg(&thisDev->interruptObj, comBase, 0, 7);

    }
    LOG("<==NSC_DEMO_SetSpeed");
    return TRUE;
}