/*++ Copyright (c) Microsoft Corporation. All rights reserved. Module Name: storport.h Abstract: These are the structures and defines that are included by STORPORT miniport drivers. Authors: Revision History: --*/ #ifdef _NTSCSI_ #error "STORPORT.H must be included instead of SCSI.H" #endif #ifdef _NTSRB_ #error "STORPORT.H must be included instead of SRB.H" #endif #ifndef _NTSTORPORT_ #define _NTSTORPORT_ #if _MSC_VER >= 1200 #pragma warning(push) #endif #pragma warning(disable:4200) // array[0] is not a warning for this file // // For backwards compatability, use SCSIPORT definitions. // #if DBG #define DebugPrint(x) StorPortDebugPrint x #else #define DebugPrint(x) #endif // // Define SCSI maximum configuration parameters. // #define SCSI_MAXIMUM_LOGICAL_UNITS 8 #define SCSI_MAXIMUM_TARGETS_PER_BUS 128 #define SCSI_MAXIMUM_LUNS_PER_TARGET 255 #define SCSI_MAXIMUM_BUSES 8 #define SCSI_MINIMUM_PHYSICAL_BREAKS 16 #define SCSI_MAXIMUM_PHYSICAL_BREAKS 255 #define SCSI_COMBINE_BUS_TARGET( Bus, Target ) ( \ ((((UCHAR) (Target)) & ~(0x20 - 1)) << 8) | \ (((UCHAR) (Bus)) << 5) | \ (((UCHAR) (Target)) & (0x20 - 1))) #define SCSI_DECODE_BUS_TARGET( Value, Bus, Target ) ( \ Bus = (UCHAR) ((Value) >> 5), \ Target = (UCHAR) ((((Value) >> 8) & ~(0x20 - 1)) | ((Value) & (0x20 - 1)))) // // This constant is for backward compatibility. // This use to be the maximum number of targets supported. // #define SCSI_MAXIMUM_TARGETS 8 typedef PHYSICAL_ADDRESS STOR_PHYSICAL_ADDRESS, *PSTOR_PHYSICAL_ADDRESS; typedef struct _ACCESS_RANGE { STOR_PHYSICAL_ADDRESS RangeStart; ULONG RangeLength; BOOLEAN RangeInMemory; } ACCESS_RANGE, *PACCESS_RANGE; typedef enum _STOR_SYNCHRONIZATION_MODEL { StorSynchronizeHalfDuplex, StorSynchronizeFullDuplex } STOR_SYNCHRONIZATION_MODEL; #define STOR_MAP_NO_BUFFERS (0) #define STOR_MAP_ALL_BUFFERS (1) #define STOR_MAP_NON_READ_WRITE_BUFFERS (2) // // Configuration information structure. Contains the information necessary // to initialize the adapter. NOTE: This structure must be a multiple of // quadwords. // typedef struct _PORT_CONFIGURATION_INFORMATION { // // Length of port configuation information strucuture. // ULONG Length; // // IO bus number (0 for machines that have only 1 IO bus // ULONG SystemIoBusNumber; // // EISA, MCA or ISA // INTERFACE_TYPE AdapterInterfaceType; // // Interrupt request level for device // ULONG BusInterruptLevel; // // Bus interrupt vector used with hardware buses which use as vector as // well as level, such as internal buses. // ULONG BusInterruptVector; // // Interrupt mode (level-sensitive or edge-triggered) // KINTERRUPT_MODE InterruptMode; // // Maximum number of bytes that can be transferred in a single SRB // ULONG MaximumTransferLength; // // Number of contiguous blocks of physical memory // ULONG NumberOfPhysicalBreaks; // // DMA channel for devices using system DMA // ULONG DmaChannel; ULONG DmaPort; DMA_WIDTH DmaWidth; DMA_SPEED DmaSpeed; // // Alignment masked required by the adapter for data transfers. // ULONG AlignmentMask; // // Number of access range elements which have been allocated. // ULONG NumberOfAccessRanges; // // Pointer to array of access range elements. // ACCESS_RANGE (*AccessRanges)[]; // // Reserved field. // PVOID Reserved; // // Number of SCSI buses attached to the adapter. // UCHAR NumberOfBuses; // // SCSI bus ID for adapter // CCHAR InitiatorBusId[8]; // // Indicates that the adapter does scatter/gather // BOOLEAN ScatterGather; // // Indicates that the adapter is a bus master // BOOLEAN Master; // // Host caches data or state. // BOOLEAN CachesData; // // Host adapter scans down for bios devices. // BOOLEAN AdapterScansDown; // // Primary at disk address (0x1F0) claimed. // BOOLEAN AtdiskPrimaryClaimed; // // Secondary at disk address (0x170) claimed. // BOOLEAN AtdiskSecondaryClaimed; // // The master uses 32-bit DMA addresses. // BOOLEAN Dma32BitAddresses; // // Use Demand Mode DMA rather than Single Request. // BOOLEAN DemandMode; // // Data buffers must be mapped into virtual address space. // UCHAR MapBuffers; // // The driver will need to tranlate virtual to physical addresses. // BOOLEAN NeedPhysicalAddresses; // // Supports tagged queuing // BOOLEAN TaggedQueuing; // // Supports auto request sense. // BOOLEAN AutoRequestSense; // // Supports multiple requests per logical unit. // BOOLEAN MultipleRequestPerLu; // // Support receive event function. // BOOLEAN ReceiveEvent; // // Indicates the real-mode driver has initialized the card. // BOOLEAN RealModeInitialized; // // Indicate that the miniport will not touch the data buffers directly. // BOOLEAN BufferAccessScsiPortControlled; // // Indicator for wide scsi. // UCHAR MaximumNumberOfTargets; // // Ensure quadword alignment. // UCHAR ReservedUchars[2]; // // Adapter slot number // ULONG SlotNumber; // // Interrupt information for a second IRQ. // ULONG BusInterruptLevel2; ULONG BusInterruptVector2; KINTERRUPT_MODE InterruptMode2; // // DMA information for a second channel. // ULONG DmaChannel2; ULONG DmaPort2; DMA_WIDTH DmaWidth2; DMA_SPEED DmaSpeed2; // // Fields added to allow for the miniport // to update these sizes based on requirements // for large transfers ( > 64K); // ULONG DeviceExtensionSize; ULONG SpecificLuExtensionSize; ULONG SrbExtensionSize; // // Used to determine whether the system and/or the miniport support // 64-bit physical addresses. See SCSI_DMA64_* flags below. // UCHAR Dma64BitAddresses; /* New */ // // Indicates that the miniport can accept a SRB_FUNCTION_RESET_DEVICE // to clear all requests to a particular LUN. // BOOLEAN ResetTargetSupported; /* New */ // // Indicates that the miniport can support more than 8 logical units per // target (maximum LUN number is one less than this field). // UCHAR MaximumNumberOfLogicalUnits; /* New */ // // Supports WMI? // BOOLEAN WmiDataProvider; // // STORPORT synchronization model, either half or full duplex // depending on whether the driver supports async-with-interrupt // model or not. // STOR_SYNCHRONIZATION_MODEL SynchronizationModel; // STORPORT New } PORT_CONFIGURATION_INFORMATION, *PPORT_CONFIGURATION_INFORMATION; // // Version control for ConfigInfo structure. // #define CONFIG_INFO_VERSION_2 sizeof(PORT_CONFIGURATION_INFORMATION) // // Flags for controlling 64-bit DMA use (PORT_CONFIGURATION_INFORMATION field // Dma64BitAddresses) // // // Set by scsiport on entering HwFindAdapter if the system can support 64-bit // physical addresses. The miniport can use this information before calling // ScsiPortGetUncachedExtension to modify the DeviceExtensionSize, // SpecificLuExtensionSize & SrbExtensionSize fields to account for the extra // size of the scatter gather list. // #define SCSI_DMA64_SYSTEM_SUPPORTED 0x80 // // Set by the miniport before calling ScsiPortGetUncachedExtension to indicate // that scsiport should provide it with 64-bit physical addresses. If the // system does not support 64-bit PA's then this bit will be ignored. // #define SCSI_DMA64_MINIPORT_SUPPORTED 0x01 // // Command type (and parameter) definition(s) for AdapterControl requests. // typedef enum _SCSI_ADAPTER_CONTROL_TYPE { ScsiQuerySupportedControlTypes = 0, ScsiStopAdapter, ScsiRestartAdapter, ScsiSetBootConfig, ScsiSetRunningConfig, ScsiAdapterControlMax, MakeAdapterControlTypeSizeOfUlong = 0xffffffff } SCSI_ADAPTER_CONTROL_TYPE, *PSCSI_ADAPTER_CONTROL_TYPE; // // Adapter control status values // typedef enum _SCSI_ADAPTER_CONTROL_STATUS { ScsiAdapterControlSuccess = 0, ScsiAdapterControlUnsuccessful } SCSI_ADAPTER_CONTROL_STATUS, *PSCSI_ADAPTER_CONTROL_STATUS; // // Parameters for Adapter Control Functions: // // // ScsiQuerySupportedControlTypes: // typedef struct _SCSI_SUPPORTED_CONTROL_TYPE_LIST { // // Specifies the number of entries in the adapter control type list. // IN ULONG MaxControlType; // // The miniport will set TRUE for each control type it supports. // The number of entries in this array is defined by MaxAdapterControlType // - the miniport must not attempt to set any AC types beyond the maximum // value specified. // OUT BOOLEAN SupportedTypeList[0]; } SCSI_SUPPORTED_CONTROL_TYPE_LIST, *PSCSI_SUPPORTED_CONTROL_TYPE_LIST; // // Uninitialized flag value. // #define SP_UNINITIALIZED_VALUE ((ULONG) ~0) #define SP_UNTAGGED ((UCHAR) ~0) // // Set asynchronous events. // #define SRBEV_BUS_RESET 0x0001 #define SRBEV_SCSI_ASYNC_NOTIFICATION 0x0002 #define MAXIMUM_CDB_SIZE 12 // // SCSI I/O Request Block // typedef struct _SCSI_REQUEST_BLOCK { USHORT Length; // offset 0 UCHAR Function; // offset 2 UCHAR SrbStatus; // offset 3 UCHAR ScsiStatus; // offset 4 UCHAR PathId; // offset 5 UCHAR TargetId; // offset 6 UCHAR Lun; // offset 7 UCHAR QueueTag; // offset 8 UCHAR QueueAction; // offset 9 UCHAR CdbLength; // offset a UCHAR SenseInfoBufferLength; // offset b ULONG SrbFlags; // offset c ULONG DataTransferLength; // offset 10 ULONG TimeOutValue; // offset 14 PVOID DataBuffer; // offset 18 PVOID SenseInfoBuffer; // offset 1c struct _SCSI_REQUEST_BLOCK *NextSrb; // offset 20 PVOID OriginalRequest; // offset 24 PVOID SrbExtension; // offset 28 union { ULONG InternalStatus; // offset 2c ULONG QueueSortKey; // offset 2c ULONG LinkTimeoutValue; // offset 2c }; #if defined(_WIN64) // // Force PVOID alignment of Cdb // ULONG Reserved; #endif UCHAR Cdb[16]; // offset 30 } SCSI_REQUEST_BLOCK, *PSCSI_REQUEST_BLOCK; #define SCSI_REQUEST_BLOCK_SIZE sizeof(SCSI_REQUEST_BLOCK) // // SCSI I/O Request Block for WMI Requests // typedef struct _SCSI_WMI_REQUEST_BLOCK { USHORT Length; UCHAR Function; // SRB_FUNCTION_WMI UCHAR SrbStatus; UCHAR WMISubFunction; UCHAR PathId; // If SRB_WMI_FLAGS_ADAPTER_REQUEST is set in UCHAR TargetId; // WMIFlags then PathId, TargetId and Lun are UCHAR Lun; // reserved fields. UCHAR Reserved1; UCHAR WMIFlags; UCHAR Reserved2[2]; ULONG SrbFlags; ULONG DataTransferLength; ULONG TimeOutValue; PVOID DataBuffer; PVOID DataPath; PVOID Reserved3; PVOID OriginalRequest; PVOID SrbExtension; ULONG Reserved4; UCHAR Reserved5[16]; } SCSI_WMI_REQUEST_BLOCK, *PSCSI_WMI_REQUEST_BLOCK; // // SRB Functions // #define SRB_FUNCTION_EXECUTE_SCSI 0x00 #define SRB_FUNCTION_CLAIM_DEVICE 0x01 #define SRB_FUNCTION_IO_CONTROL 0x02 #define SRB_FUNCTION_RECEIVE_EVENT 0x03 #define SRB_FUNCTION_RELEASE_QUEUE 0x04 #define SRB_FUNCTION_ATTACH_DEVICE 0x05 #define SRB_FUNCTION_RELEASE_DEVICE 0x06 #define SRB_FUNCTION_SHUTDOWN 0x07 #define SRB_FUNCTION_FLUSH 0x08 #define SRB_FUNCTION_ABORT_COMMAND 0x10 #define SRB_FUNCTION_RELEASE_RECOVERY 0x11 #define SRB_FUNCTION_RESET_BUS 0x12 #define SRB_FUNCTION_RESET_DEVICE 0x13 #define SRB_FUNCTION_TERMINATE_IO 0x14 #define SRB_FUNCTION_FLUSH_QUEUE 0x15 #define SRB_FUNCTION_REMOVE_DEVICE 0x16 #define SRB_FUNCTION_WMI 0x17 #define SRB_FUNCTION_LOCK_QUEUE 0x18 #define SRB_FUNCTION_UNLOCK_QUEUE 0x19 #define SRB_FUNCTION_RESET_LOGICAL_UNIT 0x20 #define SRB_FUNCTION_SET_LINK_TIMEOUT 0x21 #define SRB_FUNCTION_LINK_TIMEOUT_OCCURRED 0x22 #define SRB_FUNCTION_LINK_TIMEOUT_COMPLETE 0x23 // // SRB Status // #define SRB_STATUS_PENDING 0x00 #define SRB_STATUS_SUCCESS 0x01 #define SRB_STATUS_ABORTED 0x02 #define SRB_STATUS_ABORT_FAILED 0x03 #define SRB_STATUS_ERROR 0x04 #define SRB_STATUS_BUSY 0x05 #define SRB_STATUS_INVALID_REQUEST 0x06 #define SRB_STATUS_INVALID_PATH_ID 0x07 #define SRB_STATUS_NO_DEVICE 0x08 #define SRB_STATUS_TIMEOUT 0x09 #define SRB_STATUS_SELECTION_TIMEOUT 0x0A #define SRB_STATUS_COMMAND_TIMEOUT 0x0B #define SRB_STATUS_MESSAGE_REJECTED 0x0D #define SRB_STATUS_BUS_RESET 0x0E #define SRB_STATUS_PARITY_ERROR 0x0F #define SRB_STATUS_REQUEST_SENSE_FAILED 0x10 #define SRB_STATUS_NO_HBA 0x11 #define SRB_STATUS_DATA_OVERRUN 0x12 #define SRB_STATUS_UNEXPECTED_BUS_FREE 0x13 #define SRB_STATUS_PHASE_SEQUENCE_FAILURE 0x14 #define SRB_STATUS_BAD_SRB_BLOCK_LENGTH 0x15 #define SRB_STATUS_REQUEST_FLUSHED 0x16 #define SRB_STATUS_INVALID_LUN 0x20 #define SRB_STATUS_INVALID_TARGET_ID 0x21 #define SRB_STATUS_BAD_FUNCTION 0x22 #define SRB_STATUS_ERROR_RECOVERY 0x23 #define SRB_STATUS_NOT_POWERED 0x24 #define SRB_STATUS_LINK_DOWN 0x25 // // This value is used by the port driver to indicate that a non-scsi-related // error occured. Miniports must never return this status. // #define SRB_STATUS_INTERNAL_ERROR 0x30 // // Srb status values 0x38 through 0x3f are reserved for internal port driver // use. // // // SRB Status Masks // #define SRB_STATUS_QUEUE_FROZEN 0x40 #define SRB_STATUS_AUTOSENSE_VALID 0x80 #define SRB_STATUS(Status) (Status & ~(SRB_STATUS_AUTOSENSE_VALID | SRB_STATUS_QUEUE_FROZEN)) // // SRB Flag Bits // #define SRB_FLAGS_QUEUE_ACTION_ENABLE 0x00000002 #define SRB_FLAGS_DISABLE_DISCONNECT 0x00000004 #define SRB_FLAGS_DISABLE_SYNCH_TRANSFER 0x00000008 #define SRB_FLAGS_BYPASS_FROZEN_QUEUE 0x00000010 #define SRB_FLAGS_DISABLE_AUTOSENSE 0x00000020 #define SRB_FLAGS_DATA_IN 0x00000040 #define SRB_FLAGS_DATA_OUT 0x00000080 #define SRB_FLAGS_NO_DATA_TRANSFER 0x00000000 #define SRB_FLAGS_UNSPECIFIED_DIRECTION (SRB_FLAGS_DATA_IN | SRB_FLAGS_DATA_OUT) #define SRB_FLAGS_NO_QUEUE_FREEZE 0x00000100 #define SRB_FLAGS_ADAPTER_CACHE_ENABLE 0x00000200 #define SRB_FLAGS_FREE_SENSE_BUFFER 0x00000400 #define SRB_FLAGS_IS_ACTIVE 0x00010000 #define SRB_FLAGS_ALLOCATED_FROM_ZONE 0x00020000 #define SRB_FLAGS_SGLIST_FROM_POOL 0x00040000 #define SRB_FLAGS_BYPASS_LOCKED_QUEUE 0x00080000 #define SRB_FLAGS_NO_KEEP_AWAKE 0x00100000 #define SRB_FLAGS_PORT_DRIVER_ALLOCSENSE 0x00200000 #define SRB_FLAGS_PORT_DRIVER_SENSEHASPORT 0x00400000 #define SRB_FLAGS_DONT_START_NEXT_PACKET 0x00800000 #define SRB_FLAGS_PORT_DRIVER_RESERVED 0x0F000000 #define SRB_FLAGS_CLASS_DRIVER_RESERVED 0xF0000000 #if DBG==1 // // A signature used to validate the scsi port number // at the end of a sense buffer. // #define SCSI_PORT_SIGNATURE 0x54524f50 #endif // // Queue Action // #define SRB_SIMPLE_TAG_REQUEST 0x20 #define SRB_HEAD_OF_QUEUE_TAG_REQUEST 0x21 #define SRB_ORDERED_QUEUE_TAG_REQUEST 0x22 #define SRB_WMI_FLAGS_ADAPTER_REQUEST 0x01 // // SCSI Adapter Dependent Routines // typedef BOOLEAN (*PHW_INITIALIZE) ( IN PVOID DeviceExtension ); typedef BOOLEAN (*PHW_BUILDIO) ( IN PVOID DeviceExtension, IN PSCSI_REQUEST_BLOCK Srb ); typedef BOOLEAN (*PHW_STARTIO) ( IN PVOID DeviceExtension, IN PSCSI_REQUEST_BLOCK Srb ); typedef BOOLEAN (*PHW_INTERRUPT) ( IN PVOID DeviceExtension ); typedef VOID (*PHW_TIMER) ( IN PVOID DeviceExtension ); typedef VOID (*PHW_DMA_STARTED) ( IN PVOID DeviceExtension ); typedef ULONG (*PHW_FIND_ADAPTER) ( IN PVOID DeviceExtension, IN PVOID HwContext, IN PVOID BusInformation, IN PCHAR ArgumentString, IN OUT PPORT_CONFIGURATION_INFORMATION ConfigInfo, OUT PBOOLEAN Again ); typedef BOOLEAN (*PHW_RESET_BUS) ( IN PVOID DeviceExtension, IN ULONG PathId ); typedef BOOLEAN (*PHW_ADAPTER_STATE) ( IN PVOID DeviceExtension, IN PVOID Context, IN BOOLEAN SaveState ); typedef SCSI_ADAPTER_CONTROL_STATUS (*PHW_ADAPTER_CONTROL) ( IN PVOID DeviceExtension, IN SCSI_ADAPTER_CONTROL_TYPE ControlType, IN PVOID Parameters ); // // Port driver error codes // #define SP_BUS_PARITY_ERROR 0x0001 #define SP_UNEXPECTED_DISCONNECT 0x0002 #define SP_INVALID_RESELECTION 0x0003 #define SP_BUS_TIME_OUT 0x0004 #define SP_PROTOCOL_ERROR 0x0005 #define SP_INTERNAL_ADAPTER_ERROR 0x0006 #define SP_REQUEST_TIMEOUT 0x0007 #define SP_IRQ_NOT_RESPONDING 0x0008 #define SP_BAD_FW_WARNING 0x0009 #define SP_BAD_FW_ERROR 0x000a #define SP_LOST_WMI_MINIPORT_REQUEST 0x000b // // Return values for SCSI_HW_FIND_ADAPTER. // #define SP_RETURN_NOT_FOUND 0 #define SP_RETURN_FOUND 1 #define SP_RETURN_ERROR 2 #define SP_RETURN_BAD_CONFIG 3 // // Notification Event Types // typedef enum _SCSI_NOTIFICATION_TYPE { RequestComplete, NextRequest, NextLuRequest, ResetDetected, _obsolete1, // STORPORT: CallDisableInterrupts has been removed _obsolete2, // STORPORT: CallEnableInterrupts has been removed RequestTimerCall, BusChangeDetected, WMIEvent, WMIReregister, LinkUp, LinkDown } SCSI_NOTIFICATION_TYPE, *PSCSI_NOTIFICATION_TYPE; // // Structure passed between miniport initialization // and SCSI port initialization // typedef struct _HW_INITIALIZATION_DATA { ULONG HwInitializationDataSize; // // Adapter interface type: // // Internal // Isa // Eisa // MicroChannel // TurboChannel // PCIBus // VMEBus // NuBus // PCMCIABus // CBus // MPIBus // MPSABus // INTERFACE_TYPE AdapterInterfaceType; // // Miniport driver routines // PHW_INITIALIZE HwInitialize; PHW_STARTIO HwStartIo; PHW_INTERRUPT HwInterrupt; PHW_FIND_ADAPTER HwFindAdapter; PHW_RESET_BUS HwResetBus; PHW_DMA_STARTED HwDmaStarted; PHW_ADAPTER_STATE HwAdapterState; // // Miniport driver resources // ULONG DeviceExtensionSize; ULONG SpecificLuExtensionSize; ULONG SrbExtensionSize; ULONG NumberOfAccessRanges; PVOID Reserved; // // Data buffers must be mapped into virtual address space. // UCHAR MapBuffers; // // The driver will need to tranlate virtual to physical addresses. // BOOLEAN NeedPhysicalAddresses; // // Supports tagged queuing // BOOLEAN TaggedQueuing; // // Supports auto request sense. // BOOLEAN AutoRequestSense; // // Supports multiple requests per logical unit. // BOOLEAN MultipleRequestPerLu; // // Support receive event function. // BOOLEAN ReceiveEvent; // // Vendor identification length // USHORT VendorIdLength; // // Vendor identification // PVOID VendorId; // // Pad for alignment and future use. // USHORT ReservedUshort; // // Device identification length // USHORT DeviceIdLength; // // Device identification // PVOID DeviceId; // // Stop adapter routine. // PHW_ADAPTER_CONTROL HwAdapterControl; // // Initialize to the Build IO routine if one is supported, otherwise // should be NULL. // PHW_BUILDIO HwBuildIo; // STORPORT New } HW_INITIALIZATION_DATA, *PHW_INITIALIZATION_DATA; // // Scatter/gather lists // typedef struct _STOR_SCATTER_GATHER_ELEMENT { STOR_PHYSICAL_ADDRESS PhysicalAddress; ULONG Length; ULONG_PTR Reserved; } STOR_SCATTER_GATHER_ELEMENT, *PSTOR_SCATTER_GATHER_ELEMENT; typedef struct _STOR_SCATTER_GATHER_LIST { ULONG NumberOfElements; ULONG_PTR Reserved; STOR_SCATTER_GATHER_ELEMENT List[]; } STOR_SCATTER_GATHER_LIST, *PSTOR_SCATTER_GATHER_LIST; typedef BOOLEAN (*PSTOR_SYNCHRONIZED_ACCESS)( IN PVOID HwDeviceExtension, IN PVOID Context ); #ifndef _NTDDK_ #define STORPORT_API DECLSPEC_IMPORT #else #define STORPORT_API #endif // // Port driver routines called by miniport driver // STORPORT_API ULONG StorPortInitialize( IN PVOID Argument1, IN PVOID Argument2, IN struct _HW_INITIALIZATION_DATA *HwInitializationData, IN PVOID HwContext ); STORPORT_API VOID StorPortFreeDeviceBase( IN PVOID HwDeviceExtension, IN PVOID MappedAddress ); STORPORT_API ULONG StorPortGetBusData( IN PVOID DeviceExtension, IN ULONG BusDataType, IN ULONG SystemIoBusNumber, IN ULONG SlotNumber, IN PVOID Buffer, IN ULONG Length ); STORPORT_API ULONG StorPortSetBusDataByOffset( IN PVOID DeviceExtension, IN ULONG BusDataType, IN ULONG SystemIoBusNumber, IN ULONG SlotNumber, IN PVOID Buffer, IN ULONG Offset, IN ULONG Length ); STORPORT_API PVOID StorPortGetDeviceBase( IN PVOID HwDeviceExtension, IN INTERFACE_TYPE BusType, IN ULONG SystemIoBusNumber, IN STOR_PHYSICAL_ADDRESS IoAddress, IN ULONG NumberOfBytes, IN BOOLEAN InIoSpace ); STORPORT_API PVOID StorPortGetLogicalUnit( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun ); STORPORT_API PSTOR_SCATTER_GATHER_LIST StorPortGetScatterGatherList( IN PVOID HwDeviceExtension, IN PSCSI_REQUEST_BLOCK Srb ); STORPORT_API STOR_PHYSICAL_ADDRESS StorPortGetPhysicalAddress( IN PVOID HwDeviceExtension, IN PSCSI_REQUEST_BLOCK Srb, IN PVOID VirtualAddress, OUT ULONG *Length ); STORPORT_API PVOID StorPortGetVirtualAddress( IN PVOID HwDeviceExtension, IN STOR_PHYSICAL_ADDRESS PhysicalAddress ); STORPORT_API PVOID StorPortGetUncachedExtension( IN PVOID HwDeviceExtension, IN PPORT_CONFIGURATION_INFORMATION ConfigInfo, IN ULONG NumberOfBytes ); STORPORT_API BOOLEAN StorPortPauseDevice( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun, IN ULONG Timeout ); STORPORT_API BOOLEAN StorPortResumeDevice( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun ); STORPORT_API BOOLEAN StorPortPause( IN PVOID HwDeviceExtension, IN ULONG Timeout ); STORPORT_API BOOLEAN StorPortResume( IN PVOID HwDeviceExtension ); STORPORT_API BOOLEAN StorPortDeviceBusy( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun, IN ULONG RequestsToComplete ); STORPORT_API BOOLEAN StorPortDeviceReady( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun ); STORPORT_API BOOLEAN StorPortBusy( IN PVOID HwDeviceExtension, IN ULONG RequestsToComplete ); STORPORT_API BOOLEAN StorPortReady( IN PVOID HwDeviceExtension ); STORPORT_API BOOLEAN StorPortSetDeviceQueueDepth( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun, IN ULONG Depth ); STORPORT_API VOID StorPortNotification( IN SCSI_NOTIFICATION_TYPE NotificationType, IN PVOID HwDeviceExtension, ... ); STORPORT_API VOID StorPortLogError( IN PVOID HwDeviceExtension, IN PSCSI_REQUEST_BLOCK Srb OPTIONAL, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun, IN ULONG ErrorCode, IN ULONG UniqueId ); STORPORT_API VOID StorPortCompleteRequest( IN PVOID HwDeviceExtension, IN UCHAR PathId, IN UCHAR TargetId, IN UCHAR Lun, IN UCHAR SrbStatus ); STORPORT_API VOID StorPortMoveMemory( IN PVOID WriteBuffer, IN PVOID ReadBuffer, IN ULONG Length ); STORPORT_API UCHAR StorPortReadPortUchar( IN PVOID HwDeviceExtension, IN PUCHAR Port ); STORPORT_API USHORT StorPortReadPortUshort( IN PVOID HwDeviceExtension, IN PUSHORT Port ); STORPORT_API ULONG StorPortReadPortUlong( IN PVOID HwDeviceExtension, IN PULONG Port ); STORPORT_API VOID StorPortReadPortBufferUchar( IN PVOID HwDeviceExtension, IN PUCHAR Port, IN PUCHAR Buffer, IN ULONG Count ); STORPORT_API VOID StorPortReadPortBufferUshort( IN PVOID HwDeviceExtension, IN PUSHORT Port, IN PUSHORT Buffer, IN ULONG Count ); STORPORT_API VOID StorPortReadPortBufferUlong( IN PVOID HwDeviceExtension, IN PULONG Port, IN PULONG Buffer, IN ULONG Count ); STORPORT_API UCHAR StorPortReadRegisterUchar( IN PVOID HwDeviceExtension, IN PUCHAR Register ); STORPORT_API USHORT StorPortReadRegisterUshort( IN PVOID HwDeviceExtension, IN PUSHORT Register ); STORPORT_API ULONG StorPortReadRegisterUlong( IN PVOID HwDeviceExtension, IN PULONG Register ); STORPORT_API VOID StorPortReadRegisterBufferUchar( IN PVOID HwDeviceExtension, IN PUCHAR Register, IN PUCHAR Buffer, IN ULONG Count ); STORPORT_API VOID StorPortReadRegisterBufferUshort( IN PVOID HwDeviceExtension, IN PUSHORT Register, IN PUSHORT Buffer, IN ULONG Count ); STORPORT_API VOID StorPortReadRegisterBufferUlong( IN PVOID HwDeviceExtension, IN PULONG Register, IN PULONG Buffer, IN ULONG Count ); STORPORT_API VOID StorPortStallExecution( IN ULONG Delay ); STORPORT_API BOOLEAN StorPortSynchronizeAccess( IN PVOID HwDeviceExtension, IN PSTOR_SYNCHRONIZED_ACCESS SynchronizedAccessRoutine, IN PVOID Context ); STORPORT_API VOID StorPortWritePortUchar( IN PVOID HwDeviceExtension, IN PUCHAR Port, IN UCHAR Value ); STORPORT_API VOID StorPortWritePortUshort( IN PVOID HwDeviceExtension, IN PUSHORT Port, IN USHORT Value ); STORPORT_API VOID StorPortWritePortUlong( IN PVOID HwDeviceExtension, IN PULONG Port, IN ULONG Value ); STORPORT_API VOID StorPortWritePortBufferUchar( IN PVOID HwDeviceExtension, IN PUCHAR Port, IN PUCHAR Buffer, IN ULONG Count ); STORPORT_API VOID StorPortWritePortBufferUshort( IN PVOID HwDeviceExtension, IN PUSHORT Port, IN PUSHORT Buffer, IN ULONG Count ); STORPORT_API VOID StorPortWritePortBufferUlong( IN PVOID HwDeviceExtension, IN PULONG Port, IN PULONG Buffer, IN ULONG Count ); STORPORT_API VOID StorPortWriteRegisterUchar( IN PVOID HwDeviceExtension, IN PUCHAR Register, IN UCHAR Value ); STORPORT_API VOID StorPortWriteRegisterUshort( IN PVOID HwDeviceExtension, IN PUSHORT Register, IN USHORT Value ); STORPORT_API VOID StorPortWriteRegisterUlong( IN PVOID HwDeviceExtension, IN PULONG Register, IN ULONG Value ); STORPORT_API VOID StorPortWriteRegisterBufferUchar( IN PVOID HwDeviceExtension, IN PUCHAR Register, IN PUCHAR Buffer, IN ULONG Count ); STORPORT_API VOID StorPortWriteRegisterBufferUshort( IN PVOID HwDeviceExtension, IN PUSHORT Register, IN PUSHORT Buffer, IN ULONG Count ); STORPORT_API VOID StorPortWriteRegisterBufferUlong( IN PVOID HwDeviceExtension, IN PULONG Register, IN PULONG Buffer, IN ULONG Count ); STORPORT_API STOR_PHYSICAL_ADDRESS StorPortConvertUlongToPhysicalAddress( ULONG_PTR UlongAddress ); STORPORT_API ULONG StorPortConvertPhysicalAddressToUlong( STOR_PHYSICAL_ADDRESS Address ); STORPORT_API VOID StorPortQuerySystemTime( OUT PLARGE_INTEGER CurrentTime ); #define StorPortConvertPhysicalAddressToUlong(Address) ((Address).LowPart) #define StorPortConvertPhysicalAddressToULong64(Address) ((Address).QuadPart) #define MINIPORT_REG_SZ 1 #define MINIPORT_REG_BINARY 3 #define MINIPORT_REG_DWORD 4 STORPORT_API PUCHAR StorPortAllocateRegistryBuffer( IN PVOID HwDeviceExtension, IN PULONG Length ); STORPORT_API VOID StorPortFreeRegistryBuffer( IN PVOID HwDeviceExtension, IN PUCHAR Buffer ); BOOLEAN StorPortRegistryRead( IN PVOID HwDeviceExtension, IN PUCHAR ValueName, IN ULONG Global, IN ULONG Type, IN PUCHAR Buffer, IN PULONG BufferLength ); STORPORT_API BOOLEAN StorPortRegistryWrite( IN PVOID HwDeviceExtension, IN PUCHAR ValueName, IN ULONG Global, IN ULONG Type, IN PUCHAR Buffer, IN ULONG BufferLength ); STORPORT_API BOOLEAN StorPortValidateRange( IN PVOID HwDeviceExtension, IN INTERFACE_TYPE BusType, IN ULONG SystemIoBusNumber, IN STOR_PHYSICAL_ADDRESS IoAddress, IN ULONG NumberOfBytes, IN BOOLEAN InIoSpace ); STORPORT_API VOID StorPortDebugPrint( ULONG DebugPrintLevel, PCCHAR DebugMessage, ... ); // // Command Descriptor Block. Passed by SCSI controller chip over the SCSI bus // typedef union _CDB { // // Generic 6-Byte CDB // struct _CDB6GENERIC { UCHAR OperationCode; UCHAR Immediate : 1; UCHAR CommandUniqueBits : 4; UCHAR LogicalUnitNumber : 3; UCHAR CommandUniqueBytes[3]; UCHAR Link : 1; UCHAR Flag : 1; UCHAR Reserved : 4; UCHAR VendorUnique : 2; } CDB6GENERIC, *PCDB6GENERIC; // // Standard 6-byte CDB // struct _CDB6READWRITE { UCHAR OperationCode; // 0x08, 0x0A - SCSIOP_READ, SCSIOP_WRITE UCHAR LogicalBlockMsb1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR LogicalBlockMsb0; UCHAR LogicalBlockLsb; UCHAR TransferBlocks; UCHAR Control; } CDB6READWRITE, *PCDB6READWRITE; // // SCSI-1 Inquiry CDB // struct _CDB6INQUIRY { UCHAR OperationCode; // 0x12 - SCSIOP_INQUIRY UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR PageCode; UCHAR IReserved; UCHAR AllocationLength; UCHAR Control; } CDB6INQUIRY, *PCDB6INQUIRY; // // SCSI-3 Inquiry CDB // struct _CDB6INQUIRY3 { UCHAR OperationCode; // 0x12 - SCSIOP_INQUIRY UCHAR EnableVitalProductData : 1; UCHAR CommandSupportData : 1; UCHAR Reserved1 : 6; UCHAR PageCode; UCHAR Reserved2; UCHAR AllocationLength; UCHAR Control; } CDB6INQUIRY3, *PCDB6INQUIRY3; struct _CDB6VERIFY { UCHAR OperationCode; // 0x13 - SCSIOP_VERIFY UCHAR Fixed : 1; UCHAR ByteCompare : 1; UCHAR Immediate : 1; UCHAR Reserved : 2; UCHAR LogicalUnitNumber : 3; UCHAR VerificationLength[3]; UCHAR Control; } CDB6VERIFY, *PCDB6VERIFY; // // SCSI Format CDB // struct _CDB6FORMAT { UCHAR OperationCode; // 0x04 - SCSIOP_FORMAT_UNIT UCHAR FormatControl : 5; UCHAR LogicalUnitNumber : 3; UCHAR FReserved1; UCHAR InterleaveMsb; UCHAR InterleaveLsb; UCHAR FReserved2; } CDB6FORMAT, *PCDB6FORMAT; // // Standard 10-byte CDB struct _CDB10 { UCHAR OperationCode; UCHAR RelativeAddress : 1; UCHAR Reserved1 : 2; UCHAR ForceUnitAccess : 1; UCHAR DisablePageOut : 1; UCHAR LogicalUnitNumber : 3; UCHAR LogicalBlockByte0; UCHAR LogicalBlockByte1; UCHAR LogicalBlockByte2; UCHAR LogicalBlockByte3; UCHAR Reserved2; UCHAR TransferBlocksMsb; UCHAR TransferBlocksLsb; UCHAR Control; } CDB10, *PCDB10; // // Standard 12-byte CDB // struct _CDB12 { UCHAR OperationCode; UCHAR RelativeAddress : 1; UCHAR Reserved1 : 2; UCHAR ForceUnitAccess : 1; UCHAR DisablePageOut : 1; UCHAR LogicalUnitNumber : 3; UCHAR LogicalBlock[4]; UCHAR TransferLength[4]; UCHAR Reserved2; UCHAR Control; } CDB12, *PCDB12; // // CD Rom Audio CDBs // struct _PAUSE_RESUME { UCHAR OperationCode; // 0x4B - SCSIOP_PAUSE_RESUME UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2[6]; UCHAR Action; UCHAR Control; } PAUSE_RESUME, *PPAUSE_RESUME; // // Read Table of Contents // struct _READ_TOC { UCHAR OperationCode; // 0x43 - SCSIOP_READ_TOC UCHAR Reserved0 : 1; UCHAR Msf : 1; UCHAR Reserved1 : 3; UCHAR LogicalUnitNumber : 3; UCHAR Format2 : 4; UCHAR Reserved2 : 4; UCHAR Reserved3[3]; UCHAR StartingTrack; UCHAR AllocationLength[2]; UCHAR Control : 6; UCHAR Format : 2; } READ_TOC, *PREAD_TOC; struct _READ_DISK_INFORMATION { UCHAR OperationCode; // 0x51 - SCSIOP_READ_DISC_INFORMATION UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR Reserved2[5]; UCHAR AllocationLength[2]; UCHAR Control; } READ_DISK_INFORMATION, *PREAD_DISK_INFORMATION; struct _READ_TRACK_INFORMATION { UCHAR OperationCode; // 0x52 - SCSIOP_READ_TRACK_INFORMATION UCHAR Track : 1; UCHAR Reserved1 : 3; UCHAR Reserved2 : 1; UCHAR Lun : 3; UCHAR BlockAddress[4]; // or Track Number UCHAR Reserved3; UCHAR AllocationLength[2]; UCHAR Control; } READ_TRACK_INFORMATION, *PREAD_TRACK_INFORMATION; struct _RESERVE_TRACK_RZONE { UCHAR OperationCode; // 0x53 - SCSIOP_RESERVE_TRACK_RZONE UCHAR Reserved1[4]; UCHAR ReservationSize[4]; UCHAR Control; } RESERVE_TRACK_RZONE, *PRESERVE_TRACK_RZONE; struct _SEND_OPC_INFORMATION { UCHAR OperationCode; // 0x54 - SCSIOP_SEND_OPC_INFORMATION UCHAR DoOpc : 1; // perform OPC UCHAR Reserved : 7; UCHAR Reserved1[5]; UCHAR ParameterListLength[2]; UCHAR Reserved2; } SEND_OPC_INFORMATION, *PSEND_OPC_INFORMATION; struct _CLOSE_TRACK { UCHAR OperationCode; // 0x5B - SCSIOP_CLOSE_TRACK_SESSION UCHAR Immediate : 1; UCHAR Reserved1 : 7; UCHAR Track : 1; UCHAR Session : 1; UCHAR Reserved2 : 6; UCHAR Reserved3; UCHAR TrackNumber[2]; UCHAR Reserved4[3]; UCHAR Control; } CLOSE_TRACK, *PCLOSE_TRACK; struct _SEND_CUE_SHEET { UCHAR OperationCode; // 0x5D - SCSIOP_SEND_CUE_SHEET UCHAR Reserved[5]; UCHAR CueSheetSize[3]; UCHAR Control; } SEND_CUE_SHEET, *PSEND_CUE_SHEET; struct _READ_HEADER { UCHAR OperationCode; // 0x44 - SCSIOP_READ_HEADER UCHAR Reserved1 : 1; UCHAR Msf : 1; UCHAR Reserved2 : 3; UCHAR Lun : 3; UCHAR LogicalBlockAddress[4]; UCHAR Reserved3; UCHAR AllocationLength[2]; UCHAR Control; } READ_HEADER, *PREAD_HEADER; struct _PLAY_AUDIO { UCHAR OperationCode; // 0x45 - SCSIOP_PLAY_AUDIO UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR StartingBlockAddress[4]; UCHAR Reserved2; UCHAR PlayLength[2]; UCHAR Control; } PLAY_AUDIO, *PPLAY_AUDIO; struct _PLAY_AUDIO_MSF { UCHAR OperationCode; // 0x47 - SCSIOP_PLAY_AUDIO_MSF UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2; UCHAR StartingM; UCHAR StartingS; UCHAR StartingF; UCHAR EndingM; UCHAR EndingS; UCHAR EndingF; UCHAR Control; } PLAY_AUDIO_MSF, *PPLAY_AUDIO_MSF; struct _PLAY_CD { UCHAR OperationCode; // 0xBC - SCSIOP_PLAY_CD UCHAR Reserved1 : 1; UCHAR CMSF : 1; // LBA = 0, MSF = 1 UCHAR ExpectedSectorType : 3; UCHAR Lun : 3; union { struct _LBA { UCHAR StartingBlockAddress[4]; UCHAR PlayLength[4]; } LBA; struct _MSF { UCHAR Reserved1; UCHAR StartingM; UCHAR StartingS; UCHAR StartingF; UCHAR EndingM; UCHAR EndingS; UCHAR EndingF; UCHAR Reserved2; } MSF; }; UCHAR Audio : 1; UCHAR Composite : 1; UCHAR Port1 : 1; UCHAR Port2 : 1; UCHAR Reserved2 : 3; UCHAR Speed : 1; UCHAR Control; } PLAY_CD, *PPLAY_CD; struct _SCAN_CD { UCHAR OperationCode; // 0xBA - SCSIOP_SCAN_CD UCHAR RelativeAddress : 1; UCHAR Reserved1 : 3; UCHAR Direct : 1; UCHAR Lun : 3; UCHAR StartingAddress[4]; UCHAR Reserved2[3]; UCHAR Reserved3 : 6; UCHAR Type : 2; UCHAR Reserved4; UCHAR Control; } SCAN_CD, *PSCAN_CD; struct _STOP_PLAY_SCAN { UCHAR OperationCode; // 0x4E - SCSIOP_STOP_PLAY_SCAN UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR Reserved2[7]; UCHAR Control; } STOP_PLAY_SCAN, *PSTOP_PLAY_SCAN; // // Read SubChannel Data // struct _SUBCHANNEL { UCHAR OperationCode; // 0x42 - SCSIOP_READ_SUB_CHANNEL UCHAR Reserved0 : 1; UCHAR Msf : 1; UCHAR Reserved1 : 3; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2 : 6; UCHAR SubQ : 1; UCHAR Reserved3 : 1; UCHAR Format; UCHAR Reserved4[2]; UCHAR TrackNumber; UCHAR AllocationLength[2]; UCHAR Control; } SUBCHANNEL, *PSUBCHANNEL; // // Read CD. Used by Atapi for raw sector reads. // struct _READ_CD { UCHAR OperationCode; // 0xBE - SCSIOP_READ_CD UCHAR RelativeAddress : 1; UCHAR Reserved0 : 1; UCHAR ExpectedSectorType : 3; UCHAR Lun : 3; UCHAR StartingLBA[4]; UCHAR TransferBlocks[3]; UCHAR Reserved2 : 1; UCHAR ErrorFlags : 2; UCHAR IncludeEDC : 1; UCHAR IncludeUserData : 1; UCHAR HeaderCode : 2; UCHAR IncludeSyncData : 1; UCHAR SubChannelSelection : 3; UCHAR Reserved3 : 5; UCHAR Control; } READ_CD, *PREAD_CD; struct _READ_CD_MSF { UCHAR OperationCode; // 0xB9 - SCSIOP_READ_CD_MSF UCHAR RelativeAddress : 1; UCHAR Reserved1 : 1; UCHAR ExpectedSectorType : 3; UCHAR Lun : 3; UCHAR Reserved2; UCHAR StartingM; UCHAR StartingS; UCHAR StartingF; UCHAR EndingM; UCHAR EndingS; UCHAR EndingF; UCHAR Reserved3; UCHAR Reserved4 : 1; UCHAR ErrorFlags : 2; UCHAR IncludeEDC : 1; UCHAR IncludeUserData : 1; UCHAR HeaderCode : 2; UCHAR IncludeSyncData : 1; UCHAR SubChannelSelection : 3; UCHAR Reserved5 : 5; UCHAR Control; } READ_CD_MSF, *PREAD_CD_MSF; // // Plextor Read CD-DA // struct _PLXTR_READ_CDDA { UCHAR OperationCode; // Unknown -- vendor-unique? UCHAR Reserved0 : 5; UCHAR LogicalUnitNumber :3; UCHAR LogicalBlockByte0; UCHAR LogicalBlockByte1; UCHAR LogicalBlockByte2; UCHAR LogicalBlockByte3; UCHAR TransferBlockByte0; UCHAR TransferBlockByte1; UCHAR TransferBlockByte2; UCHAR TransferBlockByte3; UCHAR SubCode; UCHAR Control; } PLXTR_READ_CDDA, *PPLXTR_READ_CDDA; // // NEC Read CD-DA // struct _NEC_READ_CDDA { UCHAR OperationCode; // Unknown -- vendor-unique? UCHAR Reserved0; UCHAR LogicalBlockByte0; UCHAR LogicalBlockByte1; UCHAR LogicalBlockByte2; UCHAR LogicalBlockByte3; UCHAR Reserved1; UCHAR TransferBlockByte0; UCHAR TransferBlockByte1; UCHAR Control; } NEC_READ_CDDA, *PNEC_READ_CDDA; // // Mode sense // struct _MODE_SENSE { UCHAR OperationCode; // 0x1A - SCSIOP_MODE_SENSE UCHAR Reserved1 : 3; UCHAR Dbd : 1; UCHAR Reserved2 : 1; UCHAR LogicalUnitNumber : 3; UCHAR PageCode : 6; UCHAR Pc : 2; UCHAR Reserved3; UCHAR AllocationLength; UCHAR Control; } MODE_SENSE, *PMODE_SENSE; struct _MODE_SENSE10 { UCHAR OperationCode; // 0x5A - SCSIOP_MODE_SENSE10 UCHAR Reserved1 : 3; UCHAR Dbd : 1; UCHAR Reserved2 : 1; UCHAR LogicalUnitNumber : 3; UCHAR PageCode : 6; UCHAR Pc : 2; UCHAR Reserved3[4]; UCHAR AllocationLength[2]; UCHAR Control; } MODE_SENSE10, *PMODE_SENSE10; // // Mode select // struct _MODE_SELECT { UCHAR OperationCode; // 0x15 - SCSIOP_MODE_SELECT UCHAR SPBit : 1; UCHAR Reserved1 : 3; UCHAR PFBit : 1; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2[2]; UCHAR ParameterListLength; UCHAR Control; } MODE_SELECT, *PMODE_SELECT; struct _MODE_SELECT10 { UCHAR OperationCode; // 0x55 - SCSIOP_MODE_SELECT10 UCHAR SPBit : 1; UCHAR Reserved1 : 3; UCHAR PFBit : 1; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2[5]; UCHAR ParameterListLength[2]; UCHAR Control; } MODE_SELECT10, *PMODE_SELECT10; struct _LOCATE { UCHAR OperationCode; // 0x2B - SCSIOP_LOCATE UCHAR Immediate : 1; UCHAR CPBit : 1; UCHAR BTBit : 1; UCHAR Reserved1 : 2; UCHAR LogicalUnitNumber : 3; UCHAR Reserved3; UCHAR LogicalBlockAddress[4]; UCHAR Reserved4; UCHAR Partition; UCHAR Control; } LOCATE, *PLOCATE; struct _LOGSENSE { UCHAR OperationCode; // 0x4D - SCSIOP_LOG_SENSE UCHAR SPBit : 1; UCHAR PPCBit : 1; UCHAR Reserved1 : 3; UCHAR LogicalUnitNumber : 3; UCHAR PageCode : 6; UCHAR PCBit : 2; UCHAR Reserved2; UCHAR Reserved3; UCHAR ParameterPointer[2]; UCHAR AllocationLength[2]; UCHAR Control; } LOGSENSE, *PLOGSENSE; struct _LOGSELECT { UCHAR OperationCode; // 0x4C - SCSIOP_LOG_SELECT UCHAR SPBit : 1; UCHAR PCRBit : 1; UCHAR Reserved1 : 3; UCHAR LogicalUnitNumber : 3; UCHAR Reserved : 6; UCHAR PCBit : 2; UCHAR Reserved2[4]; UCHAR ParameterListLength[2]; UCHAR Control; } LOGSELECT, *PLOGSELECT; struct _PRINT { UCHAR OperationCode; // 0x0A - SCSIOP_PRINT UCHAR Reserved : 5; UCHAR LogicalUnitNumber : 3; UCHAR TransferLength[3]; UCHAR Control; } PRINT, *PPRINT; struct _SEEK { UCHAR OperationCode; // 0x2B - SCSIOP_SEEK UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR LogicalBlockAddress[4]; UCHAR Reserved2[3]; UCHAR Control; } SEEK, *PSEEK; struct _ERASE { UCHAR OperationCode; // 0x19 - SCSIOP_ERASE UCHAR Long : 1; UCHAR Immediate : 1; UCHAR Reserved1 : 3; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2[3]; UCHAR Control; } ERASE, *PERASE; struct _START_STOP { UCHAR OperationCode; // 0x1B - SCSIOP_START_STOP_UNIT UCHAR Immediate: 1; UCHAR Reserved1 : 4; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2[2]; UCHAR Start : 1; UCHAR LoadEject : 1; UCHAR Reserved3 : 6; UCHAR Control; } START_STOP, *PSTART_STOP; struct _MEDIA_REMOVAL { UCHAR OperationCode; // 0x1E - SCSIOP_MEDIUM_REMOVAL UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR Reserved2[2]; UCHAR Prevent : 1; UCHAR Persistant : 1; UCHAR Reserved3 : 6; UCHAR Control; } MEDIA_REMOVAL, *PMEDIA_REMOVAL; // // Tape CDBs // struct _SEEK_BLOCK { UCHAR OperationCode; // 0x0C - SCSIOP_SEEK_BLOCK UCHAR Immediate : 1; UCHAR Reserved1 : 7; UCHAR BlockAddress[3]; UCHAR Link : 1; UCHAR Flag : 1; UCHAR Reserved2 : 4; UCHAR VendorUnique : 2; } SEEK_BLOCK, *PSEEK_BLOCK; struct _REQUEST_BLOCK_ADDRESS { UCHAR OperationCode; // 0x02 - SCSIOP_REQUEST_BLOCK_ADDR UCHAR Reserved1[3]; UCHAR AllocationLength; UCHAR Link : 1; UCHAR Flag : 1; UCHAR Reserved2 : 4; UCHAR VendorUnique : 2; } REQUEST_BLOCK_ADDRESS, *PREQUEST_BLOCK_ADDRESS; struct _PARTITION { UCHAR OperationCode; // 0x0D - SCSIOP_PARTITION UCHAR Immediate : 1; UCHAR Sel: 1; UCHAR PartitionSelect : 6; UCHAR Reserved1[3]; UCHAR Control; } PARTITION, *PPARTITION; struct _WRITE_TAPE_MARKS { UCHAR OperationCode; // Unknown -- vendor-unique? UCHAR Immediate : 1; UCHAR WriteSetMarks: 1; UCHAR Reserved : 3; UCHAR LogicalUnitNumber : 3; UCHAR TransferLength[3]; UCHAR Control; } WRITE_TAPE_MARKS, *PWRITE_TAPE_MARKS; struct _SPACE_TAPE_MARKS { UCHAR OperationCode; // Unknown -- vendor-unique? UCHAR Code : 3; UCHAR Reserved : 2; UCHAR LogicalUnitNumber : 3; UCHAR NumMarksMSB ; UCHAR NumMarks; UCHAR NumMarksLSB; union { UCHAR value; struct { UCHAR Link : 1; UCHAR Flag : 1; UCHAR Reserved : 4; UCHAR VendorUnique : 2; } Fields; } Byte6; } SPACE_TAPE_MARKS, *PSPACE_TAPE_MARKS; // // Read tape position // struct _READ_POSITION { UCHAR Operation; // 0x43 - SCSIOP_READ_POSITION UCHAR BlockType:1; UCHAR Reserved1:4; UCHAR Lun:3; UCHAR Reserved2[7]; UCHAR Control; } READ_POSITION, *PREAD_POSITION; // // ReadWrite for Tape // struct _CDB6READWRITETAPE { UCHAR OperationCode; // Unknown -- vendor-unique? UCHAR VendorSpecific : 5; UCHAR Reserved : 3; UCHAR TransferLenMSB; UCHAR TransferLen; UCHAR TransferLenLSB; UCHAR Link : 1; UCHAR Flag : 1; UCHAR Reserved1 : 4; UCHAR VendorUnique : 2; } CDB6READWRITETAPE, *PCDB6READWRITETAPE; // // Medium changer CDB's // struct _INIT_ELEMENT_STATUS { UCHAR OperationCode; // 0x07 - SCSIOP_INIT_ELEMENT_STATUS UCHAR Reserved1 : 5; UCHAR LogicalUnitNubmer : 3; UCHAR Reserved2[3]; UCHAR Reserved3 : 7; UCHAR NoBarCode : 1; } INIT_ELEMENT_STATUS, *PINIT_ELEMENT_STATUS; struct _INITIALIZE_ELEMENT_RANGE { UCHAR OperationCode; // 0xE7 - SCSIOP_INIT_ELEMENT_RANGE UCHAR Range : 1; UCHAR Reserved1 : 4; UCHAR LogicalUnitNubmer : 3; UCHAR FirstElementAddress[2]; UCHAR Reserved2[2]; UCHAR NumberOfElements[2]; UCHAR Reserved3; UCHAR Reserved4 : 7; UCHAR NoBarCode : 1; } INITIALIZE_ELEMENT_RANGE, *PINITIALIZE_ELEMENT_RANGE; struct _POSITION_TO_ELEMENT { UCHAR OperationCode; // 0x2B - SCSIOP_POSITION_TO_ELEMENT UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR TransportElementAddress[2]; UCHAR DestinationElementAddress[2]; UCHAR Reserved2[2]; UCHAR Flip : 1; UCHAR Reserved3 : 7; UCHAR Control; } POSITION_TO_ELEMENT, *PPOSITION_TO_ELEMENT; struct _MOVE_MEDIUM { UCHAR OperationCode; // 0xA5 - SCSIOP_MOVE_MEDIUM UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR TransportElementAddress[2]; UCHAR SourceElementAddress[2]; UCHAR DestinationElementAddress[2]; UCHAR Reserved2[2]; UCHAR Flip : 1; UCHAR Reserved3 : 7; UCHAR Control; } MOVE_MEDIUM, *PMOVE_MEDIUM; struct _EXCHANGE_MEDIUM { UCHAR OperationCode; // 0xA6 - SCSIOP_EXCHANGE_MEDIUM UCHAR Reserved1 : 5; UCHAR LogicalUnitNumber : 3; UCHAR TransportElementAddress[2]; UCHAR SourceElementAddress[2]; UCHAR Destination1ElementAddress[2]; UCHAR Destination2ElementAddress[2]; UCHAR Flip1 : 1; UCHAR Flip2 : 1; UCHAR Reserved3 : 6; UCHAR Control; } EXCHANGE_MEDIUM, *PEXCHANGE_MEDIUM; struct _READ_ELEMENT_STATUS { UCHAR OperationCode; // 0xB8 - SCSIOP_READ_ELEMENT_STATUS UCHAR ElementType : 4; UCHAR VolTag : 1; UCHAR LogicalUnitNumber : 3; UCHAR StartingElementAddress[2]; UCHAR NumberOfElements[2]; UCHAR Reserved1; UCHAR AllocationLength[3]; UCHAR Reserved2; UCHAR Control; } READ_ELEMENT_STATUS, *PREAD_ELEMENT_STATUS; struct _SEND_VOLUME_TAG { UCHAR OperationCode; // 0xB6 - SCSIOP_SEND_VOLUME_TAG UCHAR ElementType : 4; UCHAR Reserved1 : 1; UCHAR LogicalUnitNumber : 3; UCHAR StartingElementAddress[2]; UCHAR Reserved2; UCHAR ActionCode : 5; UCHAR Reserved3 : 3; UCHAR Reserved4[2]; UCHAR ParameterListLength[2]; UCHAR Reserved5; UCHAR Control; } SEND_VOLUME_TAG, *PSEND_VOLUME_TAG; struct _REQUEST_VOLUME_ELEMENT_ADDRESS { UCHAR OperationCode; // Unknown -- vendor-unique? UCHAR ElementType : 4; UCHAR VolTag : 1; UCHAR LogicalUnitNumber : 3; UCHAR StartingElementAddress[2]; UCHAR NumberElements[2]; UCHAR Reserved1; UCHAR AllocationLength[3]; UCHAR Reserved2; UCHAR Control; } REQUEST_VOLUME_ELEMENT_ADDRESS, *PREQUEST_VOLUME_ELEMENT_ADDRESS; // // Atapi 2.5 Changer 12-byte CDBs // struct _LOAD_UNLOAD { UCHAR OperationCode; // 0xA6 - SCSIOP_LOAD_UNLOAD_SLOT UCHAR Immediate : 1; UCHAR Reserved1 : 4; UCHAR Lun : 3; UCHAR Reserved2[2]; UCHAR Start : 1; UCHAR LoadEject : 1; UCHAR Reserved3: 6; UCHAR Reserved4[3]; UCHAR Slot; UCHAR Reserved5[3]; } LOAD_UNLOAD, *PLOAD_UNLOAD; struct _MECH_STATUS { UCHAR OperationCode; // 0xBD - SCSIOP_MECHANISM_STATUS UCHAR Reserved : 5; UCHAR Lun : 3; UCHAR Reserved1[6]; UCHAR AllocationLength[2]; UCHAR Reserved2[1]; UCHAR Control; } MECH_STATUS, *PMECH_STATUS; // // C/DVD 0.9 CDBs // struct _SYNCHRONIZE_CACHE10 { UCHAR OperationCode; // 0x35 - SCSIOP_SYNCHRONIZE_CACHE UCHAR RelAddr : 1; UCHAR Immediate : 1; UCHAR Reserved : 3; UCHAR Lun : 3; UCHAR LogicalBlockAddress[4]; // Unused - set to zero UCHAR Reserved2; UCHAR BlockCount[2]; // Unused - set to zero UCHAR Control; } SYNCHRONIZE_CACHE10, *PSYNCHRONIZE_CACHE10; struct _GET_EVENT_STATUS_NOTIFICATION { UCHAR OperationCode; // 0x4A - SCSIOP_GET_EVENT_STATUS_NOTIFICATION UCHAR Immediate : 1; UCHAR Reserved : 4; UCHAR Lun : 3; UCHAR Reserved2[2]; UCHAR NotificationClassRequest; UCHAR Reserved3[2]; UCHAR EventListLength[2]; UCHAR Control; } GET_EVENT_STATUS_NOTIFICATION, *PGET_EVENT_STATUS_NOTIFICATION; struct _READ_DVD_STRUCTURE { UCHAR OperationCode; // 0xAD - SCSIOP_READ_DVD_STRUCTURE UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR RMDBlockNumber[4]; UCHAR LayerNumber; UCHAR Format; UCHAR AllocationLength[2]; UCHAR Reserved3 : 6; UCHAR AGID : 2; UCHAR Control; } READ_DVD_STRUCTURE, *PREAD_DVD_STRUCTURE; struct _SEND_DVD_STRUCTURE { UCHAR OperationCode; // 0xBF - SCSIOP_SEND_DVD_STRUCTURE UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR Reserved2[5]; UCHAR Format; UCHAR ParameterListLength[2]; UCHAR Reserved3; UCHAR Control; } SEND_DVD_STRUCTURE, *PSEND_DVD_STRUCTURE; struct _SEND_KEY { UCHAR OperationCode; // 0xA3 - SCSIOP_SEND_KEY UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR Reserved2[6]; UCHAR ParameterListLength[2]; UCHAR KeyFormat : 6; UCHAR AGID : 2; UCHAR Control; } SEND_KEY, *PSEND_KEY; struct _REPORT_KEY { UCHAR OperationCode; // 0xA4 - SCSIOP_REPORT_KEY UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR LogicalBlockAddress[4]; // for title key UCHAR Reserved2[2]; UCHAR AllocationLength[2]; UCHAR KeyFormat : 6; UCHAR AGID : 2; UCHAR Control; } REPORT_KEY, *PREPORT_KEY; struct _SET_READ_AHEAD { UCHAR OperationCode; // 0xA7 - SCSIOP_SET_READ_AHEAD UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR TriggerLBA[4]; UCHAR ReadAheadLBA[4]; UCHAR Reserved2; UCHAR Control; } SET_READ_AHEAD, *PSET_READ_AHEAD; struct _READ_FORMATTED_CAPACITIES { UCHAR OperationCode; // 0x23 - SCSIOP_READ_FORMATTED_CAPACITY UCHAR Reserved1 : 5; UCHAR Lun : 3; UCHAR Reserved2[5]; UCHAR AllocationLength[2]; UCHAR Control; } READ_FORMATTED_CAPACITIES, *PREAD_FORMATTED_CAPACITIES; // // SCSI-3 // struct _REPORT_LUNS { UCHAR OperationCode; // 0xA0 - SCSIOP_REPORT_LUNS UCHAR Reserved1[5]; UCHAR AllocationLength[4]; UCHAR Reserved2[1]; UCHAR Control; } REPORT_LUNS, *PREPORT_LUNS; struct _PERSISTENT_RESERVE_IN { UCHAR OperationCode; // 0x5E - SCSIOP_PERSISTENT_RESERVE_IN UCHAR ServiceAction : 5; UCHAR Reserved1 : 3; UCHAR Reserved2[5]; UCHAR AllocationLength[2]; UCHAR Control; } PERSISTENT_RESERVE_IN, *PPERSISTENT_RESERVE_IN; struct _PERSISTENT_RESERVE_OUT { UCHAR OperationCode; // 0x5F - SCSIOP_PERSISTENT_RESERVE_OUT UCHAR ServiceAction : 5; UCHAR Reserved1 : 3; UCHAR Type : 4; UCHAR Scope : 4; UCHAR Reserved2[4]; UCHAR ParameterListLength[2]; // 0x18 UCHAR Control; } PERSISTENT_RESERVE_OUT, *PPERSISTENT_RESERVE_OUT; // // MMC / SFF-8090 commands // struct _GET_CONFIGURATION { UCHAR OperationCode; // 0x46 - SCSIOP_GET_CONFIGURATION UCHAR RequestType : 1; // SCSI_GET_CONFIGURATION_REQUEST_TYPE_* UCHAR Reserved1 : 7; // includes obsolete LUN field UCHAR StartingFeature[2]; UCHAR Reserved2[3]; UCHAR AllocationLength[2]; UCHAR Control; } GET_CONFIGURATION, *PGET_CONFIGURATION; struct _SET_CD_SPEED { UCHAR OperationCode; // 0xB8 - SCSIOP_SET_CD_SPEED UCHAR Reserved1; UCHAR ReadSpeed[2]; // 1x == (75 * 2352) UCHAR WriteSpeed[2]; // 1x == (75 * 2352) UCHAR Reserved2[5]; UCHAR Control; } SET_CD_SPEED, *PSET_CD_SPEED; ULONG AsUlong[4]; UCHAR AsByte[16]; } CDB, *PCDB; //////////////////////////////////////////////////////////////////////////////// // // GET_EVENT_STATUS_NOTIFICATION // #define NOTIFICATION_OPERATIONAL_CHANGE_CLASS_MASK 0x02 #define NOTIFICATION_POWER_MANAGEMENT_CLASS_MASK 0x04 #define NOTIFICATION_EXTERNAL_REQUEST_CLASS_MASK 0x08 #define NOTIFICATION_MEDIA_STATUS_CLASS_MASK 0x10 #define NOTIFICATION_MULTI_HOST_CLASS_MASK 0x20 #define NOTIFICATION_DEVICE_BUSY_CLASS_MASK 0x40 #define NOTIFICATION_NO_CLASS_EVENTS 0x0 #define NOTIFICATION_OPERATIONAL_CHANGE_CLASS_EVENTS 0x1 #define NOTIFICATION_POWER_MANAGEMENT_CLASS_EVENTS 0x2 #define NOTIFICATION_EXTERNAL_REQUEST_CLASS_EVENTS 0x3 #define NOTIFICATION_MEDIA_STATUS_CLASS_EVENTS 0x4 #define NOTIFICATION_MULTI_HOST_CLASS_EVENTS 0x5 #define NOTIFICATION_DEVICE_BUSY_CLASS_EVENTS 0x6 typedef struct _NOTIFICATION_EVENT_STATUS_HEADER { UCHAR EventDataLength[2]; UCHAR NotificationClass : 3; UCHAR Reserved : 4; UCHAR NEA : 1; UCHAR SupportedEventClasses; UCHAR ClassEventData[0]; } NOTIFICATION_EVENT_STATUS_HEADER, *PNOTIFICATION_EVENT_STATUS_HEADER; #define NOTIFICATION_OPERATIONAL_EVENT_NO_CHANGE 0x0 #define NOTIFICATION_OPERATIONAL_EVENT_CHANGE_REQUESTED 0x1 #define NOTIFICATION_OPERATIONAL_EVENT_CHANGE_OCCURRED 0x2 #define NOTIFICATION_OPERATIONAL_STATUS_AVAILABLE 0x0 #define NOTIFICATION_OPERATIONAL_STATUS_TEMPORARY_BUSY 0x1 #define NOTIFICATION_OPERATIONAL_STATUS_EXTENDED_BUSY 0x2 #define NOTIFICATION_OPERATIONAL_OPCODE_NONE #define NOTIFICATION_OPERATIONAL_OPCODE_FEATURE_CHANGE 0x1 #define NOTIFICATION_OPERATIONAL_OPCODE_FEATURE_ADDED 0x2 #define NOTIFICATION_OPERATIONAL_OPCODE_UNIT_RESET 0x3 #define NOTIFICATION_OPERATIONAL_OPCODE_FIRMWARE_CHANGED 0x4 #define NOTIFICATION_OPERATIONAL_OPCODE_INQUIRY_CHANGED 0x5 // // Class event data may be one (or none) of the following: // typedef struct _NOTIFICATION_OPERATIONAL_STATUS { // event class == 0x1 UCHAR OperationalEvent : 4; UCHAR Reserved1 : 4; UCHAR OperationalStatus : 4; UCHAR Reserved2 : 3; UCHAR PersistentPrevented : 1; UCHAR Operation[2]; } NOTIFICATION_OPERATIONAL_STATUS, *PNOTIFICATION_OPERATIONAL_STATUS; #define NOTIFICATION_POWER_EVENT_NO_CHANGE 0x0 #define NOTIFICATION_POWER_EVENT_CHANGE_SUCCEEDED 0x1 #define NOTIFICATION_POWER_EVENT_CHANGE_FAILED 0x2 #define NOTIFICATION_POWER_STATUS_ACTIVE 0x1 #define NOTIFICATION_POWER_STATUS_IDLE 0x2 #define NOTIFICATION_POWER_STATUS_STANDBY 0x3 #define NOTIFICATION_POWER_STATUS_SLEEP 0x4 typedef struct _NOTIFICATION_POWER_STATUS { // event class == 0x2 UCHAR PowerEvent : 4; UCHAR Reserved : 4; UCHAR PowerStatus; UCHAR Reserved2[2]; } NOTIFICATION_POWER_STATUS, *PNOTIFICATION_POWER_STATUS; #define NOTIFICATION_EXTERNAL_EVENT_NO_CHANGE 0x0 #define NOTIFICATION_EXTERNAL_EVENT_BUTTON_DOWN 0x1 #define NOTIFICATION_EXTERNAL_EVENT_BUTTON_UP 0x2 #define NOTIFICATION_EXTERNAL_EVENT_EXTERNAL 0x3 // respond with GET_CONFIGURATION? #define NOTIFICATION_EXTERNAL_STATUS_READY 0x0 #define NOTIFICATION_EXTERNAL_STATUS_PREVENT 0x1 #define NOTIFICATION_EXTERNAL_REQUEST_NONE 0x0000 #define NOTIFICATION_EXTERNAL_REQUEST_QUEUE_OVERRUN 0x0001 #define NOTIFICATION_EXTERNAL_REQUEST_PLAY 0x0101 #define NOTIFICATION_EXTERNAL_REQUEST_REWIND_BACK 0x0102 #define NOTIFICATION_EXTERNAL_REQUEST_FAST_FORWARD 0x0103 #define NOTIFICATION_EXTERNAL_REQUEST_PAUSE 0x0104 #define NOTIFICATION_EXTERNAL_REQUEST_STOP 0x0106 #define NOTIFICATION_EXTERNAL_REQUEST_ASCII_LOW 0x0200 #define NOTIFICATION_EXTERNAL_REQUEST_ASCII_HIGH 0x02ff typedef struct _NOTIFICATION_EXTERNAL_STATUS { // event class == 0x3 UCHAR ExternalEvent : 4; UCHAR Reserved1 : 4; UCHAR ExternalStatus : 4; UCHAR Reserved2 : 3; UCHAR PersistentPrevented : 1; UCHAR Request[2]; } NOTIFICATION_EXTERNAL_STATUS, *PNOTIFICATION_EXTERNAL_STATUS; #define NOTIFICATION_MEDIA_EVENT_NO_CHANGE 0x0 #define NOTIFICATION_MEDIA_EVENT_EJECT_REQUEST 0x1 #define NOTIFICATION_MEDIA_EVENT_NEW_MEDIA 0x2 #define NOTIFICATION_MEDIA_EVENT_MEDIA_REMOVAL 0x3 #define NOTIFICATION_MEDIA_EVENT_MEDIA_CHANGE 0x4 typedef struct _NOTIFICATION_MEDIA_STATUS { // event class == 0x4 UCHAR MediaEvent : 4; UCHAR Reserved : 4; union { UCHAR PowerStatus; // OBSOLETE -- was improperly named in NT5 headers UCHAR MediaStatus; // Use this for currently reserved fields struct { UCHAR DoorTrayOpen : 1; UCHAR MediaPresent : 1; UCHAR ReservedX : 6; // do not reference this directly! }; }; UCHAR StartSlot; UCHAR EndSlot; } NOTIFICATION_MEDIA_STATUS, *PNOTIFICATION_MEDIA_STATUS; #define NOTIFICATION_MULTI_HOST_EVENT_NO_CHANGE 0x0 #define NOTIFICATION_MULTI_HOST_EVENT_CONTROL_REQUEST 0x1 #define NOTIFICATION_MULTI_HOST_EVENT_CONTROL_GRANT 0x2 #define NOTIFICATION_MULTI_HOST_EVENT_CONTROL_RELEASE 0x3 #define NOTIFICATION_MULTI_HOST_STATUS_READY 0x0 #define NOTIFICATION_MULTI_HOST_STATUS_PREVENT 0x1 #define NOTIFICATION_MULTI_HOST_PRIORITY_NO_REQUESTS 0x0 #define NOTIFICATION_MULTI_HOST_PRIORITY_LOW 0x1 #define NOTIFICATION_MULTI_HOST_PRIORITY_MEDIUM 0x2 #define NOTIFICATION_MULTI_HOST_PRIORITY_HIGH 0x3 typedef struct _NOTIFICATION_MULTI_HOST_STATUS { // event class == 0x5 UCHAR MultiHostEvent : 4; UCHAR Reserved1 : 4; UCHAR MultiHostStatus : 4; UCHAR Reserved2 : 3; UCHAR PersistentPrevented : 1; UCHAR Priority[2]; } NOTIFICATION_MULTI_HOST_STATUS, *PNOTIFICATION_MULTI_HOST_STATUS; #define NOTIFICATION_BUSY_EVENT_NO_CHANGE 0x0 #define NOTIFICATION_BUSY_EVENT_BUSY 0x1 #define NOTIFICATION_BUSY_STATUS_NO_EVENT 0x0 #define NOTIFICATION_BUSY_STATUS_POWER 0x1 #define NOTIFICATION_BUSY_STATUS_IMMEDIATE 0x2 #define NOTIFICATION_BUSY_STATUS_DEFERRED 0x3 typedef struct _NOTIFICATION_BUSY_STATUS { // event class == 0x6 UCHAR DeviceBusyEvent : 4; UCHAR Reserved : 4; UCHAR DeviceBusyStatus; UCHAR Time[2]; } NOTIFICATION_BUSY_STATUS, *PNOTIFICATION_BUSY_STATUS; //////////////////////////////////////////////////////////////////////////////// // // Read DVD Structure Definitions and Constants // #define DVD_FORMAT_LEAD_IN 0x00 #define DVD_FORMAT_COPYRIGHT 0x01 #define DVD_FORMAT_DISK_KEY 0x02 #define DVD_FORMAT_BCA 0x03 #define DVD_FORMAT_MANUFACTURING 0x04 typedef struct _READ_DVD_STRUCTURES_HEADER { UCHAR Length[2]; UCHAR Reserved[2]; UCHAR Data[0]; } READ_DVD_STRUCTURES_HEADER, *PREAD_DVD_STRUCTURES_HEADER; // // DiskKey, BCA & Manufacturer information will provide byte arrays as their // data. // // // CDVD 0.9 Send & Report Key Definitions and Structures // #define DVD_REPORT_AGID 0x00 #define DVD_CHALLENGE_KEY 0x01 #define DVD_KEY_1 0x02 #define DVD_KEY_2 0x03 #define DVD_TITLE_KEY 0x04 #define DVD_REPORT_ASF 0x05 #define DVD_INVALIDATE_AGID 0x3F typedef struct _CDVD_KEY_HEADER { UCHAR DataLength[2]; UCHAR Reserved[2]; UCHAR Data[0]; } CDVD_KEY_HEADER, *PCDVD_KEY_HEADER; typedef struct _CDVD_REPORT_AGID_DATA { UCHAR Reserved1[3]; UCHAR Reserved2 : 6; UCHAR AGID : 2; } CDVD_REPORT_AGID_DATA, *PCDVD_REPORT_AGID_DATA; typedef struct _CDVD_CHALLENGE_KEY_DATA { UCHAR ChallengeKeyValue[10]; UCHAR Reserved[2]; } CDVD_CHALLENGE_KEY_DATA, *PCDVD_CHALLENGE_KEY_DATA; typedef struct _CDVD_KEY_DATA { UCHAR Key[5]; UCHAR Reserved[3]; } CDVD_KEY_DATA, *PCDVD_KEY_DATA; typedef struct _CDVD_REPORT_ASF_DATA { UCHAR Reserved1[3]; UCHAR Success : 1; UCHAR Reserved2 : 7; } CDVD_REPORT_ASF_DATA, *PCDVD_REPORT_ASF_DATA; typedef struct _CDVD_TITLE_KEY_HEADER { UCHAR DataLength[2]; UCHAR Reserved1[1]; UCHAR Reserved2 : 3; UCHAR CGMS : 2; UCHAR CP_SEC : 1; UCHAR CPM : 1; UCHAR Zero : 1; CDVD_KEY_DATA TitleKey; } CDVD_TITLE_KEY_HEADER, *PCDVD_TITLE_KEY_HEADER; // // Read Formatted Capacity Data - returned in Big Endian Format // typedef struct _FORMATTED_CAPACITY_DESCRIPTOR { UCHAR NumberOfBlocks[4]; UCHAR Maximum : 1; UCHAR Valid : 1; UCHAR BlockLength[3]; } FORMATTED_CAPACITY_DESCRIPTOR, *PFORMATTED_CAPACITY_DESCRIPTOR; typedef struct _FORMATTED_CAPACITY_LIST { UCHAR Reserved[3]; UCHAR CapacityListLength; FORMATTED_CAPACITY_DESCRIPTOR Descriptors[0]; } FORMATTED_CAPACITY_LIST, *PFORMATTED_CAPACITY_LIST; // // PLAY_CD definitions and constants // #define CD_EXPECTED_SECTOR_ANY 0x0 #define CD_EXPECTED_SECTOR_CDDA 0x1 #define CD_EXPECTED_SECTOR_MODE1 0x2 #define CD_EXPECTED_SECTOR_MODE2 0x3 #define CD_EXPECTED_SECTOR_MODE2_FORM1 0x4 #define CD_EXPECTED_SECTOR_MODE2_FORM2 0x5 // // Read Disk Information Definitions and Capabilities // #define DISK_STATUS_EMPTY 0x00 #define DISK_STATUS_INCOMPLETE 0x01 #define DISK_STATUS_COMPLETE 0x02 #define LAST_SESSION_EMPTY 0x00 #define LAST_SESSION_INCOMPLETE 0x01 #define LAST_SESSION_COMPLETE 0x03 #define DISK_TYPE_CDDA 0x01 #define DISK_TYPE_CDI 0x10 #define DISK_TYPE_XA 0x20 #define DISK_TYPE_UNDEFINED 0xFF typedef struct _OPC_TABLE_ENTRY { UCHAR Speed[2]; UCHAR OPCValue[6]; } OPC_TABLE_ENTRY, *POPC_TABLE_ENTRY; typedef struct _DISK_INFORMATION { UCHAR Length[2]; UCHAR DiskStatus : 2; UCHAR LastSessionStatus : 2; UCHAR Erasable : 1; UCHAR Reserved1 : 3; UCHAR FirstTrackNumber; UCHAR NumberOfSessions; UCHAR LastSessionFirstTrack; UCHAR LastSessionLastTrack; UCHAR Reserved2 : 5; UCHAR GEN : 1; UCHAR DBC_V : 1; UCHAR DID_V : 1; UCHAR DiskType; UCHAR Reserved3[3]; UCHAR DiskIdentification[4]; UCHAR LastSessionLeadIn[4]; // MSF UCHAR LastPossibleStartTime[4]; // MSF UCHAR DiskBarCode[8]; UCHAR Reserved4; UCHAR NumberOPCEntries; OPC_TABLE_ENTRY OPCTable[0]; } DISK_INFORMATION, *PDISK_INFORMATION; // // Read Header definitions and structures // typedef struct _DATA_BLOCK_HEADER { UCHAR DataMode; UCHAR Reserved[4]; union { UCHAR LogicalBlockAddress[4]; struct { UCHAR Reserved; UCHAR M; UCHAR S; UCHAR F; } MSF; }; } DATA_BLOCK_HEADER, *PDATA_BLOCK_HEADER; #define DATA_BLOCK_MODE0 0x0 #define DATA_BLOCK_MODE1 0x1 #define DATA_BLOCK_MODE2 0x2 // // Read TOC Format Codes // #define READ_TOC_FORMAT_TOC 0x00 #define READ_TOC_FORMAT_SESSION 0x01 #define READ_TOC_FORMAT_FULL_TOC 0x02 #define READ_TOC_FORMAT_PMA 0x03 #define READ_TOC_FORMAT_ATIP 0x04 typedef struct _TRACK_INFORMATION { UCHAR Length[2]; UCHAR TrackNumber; UCHAR SessionNumber; UCHAR Reserved1; UCHAR TrackMode : 4; UCHAR Copy : 1; UCHAR Damage : 1; UCHAR Reserved2 : 2; UCHAR DataMode : 4; UCHAR FP : 1; UCHAR Packet : 1; UCHAR Blank : 1; UCHAR RT : 1; UCHAR NWA_V : 1; UCHAR Reserved3 : 7; UCHAR TrackStartAddress[4]; UCHAR NextWritableAddress[4]; UCHAR FreeBlocks[4]; UCHAR FixedPacketSize[4]; } TRACK_INFORMATION, *PTRACK_INFORMATION; // // Command Descriptor Block constants. // #define CDB6GENERIC_LENGTH 6 #define CDB10GENERIC_LENGTH 10 #define CDB12GENERIC_LENGTH 12 #define SETBITON 1 #define SETBITOFF 0 // // Mode Sense/Select page constants. // #define MODE_PAGE_ERROR_RECOVERY 0x01 #define MODE_PAGE_DISCONNECT 0x02 #define MODE_PAGE_FORMAT_DEVICE 0x03 #define MODE_PAGE_RIGID_GEOMETRY 0x04 #define MODE_PAGE_FLEXIBILE 0x05 // disk #define MODE_PAGE_WRITE_PARAMETERS 0x05 // cdrom #define MODE_PAGE_VERIFY_ERROR 0x07 #define MODE_PAGE_CACHING 0x08 #define MODE_PAGE_PERIPHERAL 0x09 #define MODE_PAGE_CONTROL 0x0A #define MODE_PAGE_MEDIUM_TYPES 0x0B #define MODE_PAGE_NOTCH_PARTITION 0x0C #define MODE_PAGE_CD_AUDIO_CONTROL 0x0E #define MODE_PAGE_DATA_COMPRESS 0x0F #define MODE_PAGE_DEVICE_CONFIG 0x10 #define MODE_PAGE_MEDIUM_PARTITION 0x11 #define MODE_PAGE_CDVD_FEATURE_SET 0x18 #define MODE_PAGE_POWER_CONDITION 0x1A #define MODE_PAGE_FAULT_REPORTING 0x1C #define MODE_PAGE_CDVD_INACTIVITY 0x1D // cdrom #define MODE_PAGE_ELEMENT_ADDRESS 0x1D #define MODE_PAGE_TRANSPORT_GEOMETRY 0x1E #define MODE_PAGE_DEVICE_CAPABILITIES 0x1F #define MODE_PAGE_CAPABILITIES 0x2A // cdrom #define MODE_SENSE_RETURN_ALL 0x3f #define MODE_SENSE_CURRENT_VALUES 0x00 #define MODE_SENSE_CHANGEABLE_VALUES 0x40 #define MODE_SENSE_DEFAULT_VAULES 0x80 #define MODE_SENSE_SAVED_VALUES 0xc0 // // SCSI CDB operation codes // // 6-byte commands: #define SCSIOP_TEST_UNIT_READY 0x00 #define SCSIOP_REZERO_UNIT 0x01 #define SCSIOP_REWIND 0x01 #define SCSIOP_REQUEST_BLOCK_ADDR 0x02 #define SCSIOP_REQUEST_SENSE 0x03 #define SCSIOP_FORMAT_UNIT 0x04 #define SCSIOP_READ_BLOCK_LIMITS 0x05 #define SCSIOP_REASSIGN_BLOCKS 0x07 #define SCSIOP_INIT_ELEMENT_STATUS 0x07 #define SCSIOP_READ6 0x08 #define SCSIOP_RECEIVE 0x08 #define SCSIOP_WRITE6 0x0A #define SCSIOP_PRINT 0x0A #define SCSIOP_SEND 0x0A #define SCSIOP_SEEK6 0x0B #define SCSIOP_TRACK_SELECT 0x0B #define SCSIOP_SLEW_PRINT 0x0B #define SCSIOP_SEEK_BLOCK 0x0C #define SCSIOP_PARTITION 0x0D #define SCSIOP_READ_REVERSE 0x0F #define SCSIOP_WRITE_FILEMARKS 0x10 #define SCSIOP_FLUSH_BUFFER 0x10 #define SCSIOP_SPACE 0x11 #define SCSIOP_INQUIRY 0x12 #define SCSIOP_VERIFY6 0x13 #define SCSIOP_RECOVER_BUF_DATA 0x14 #define SCSIOP_MODE_SELECT 0x15 #define SCSIOP_RESERVE_UNIT 0x16 #define SCSIOP_RELEASE_UNIT 0x17 #define SCSIOP_COPY 0x18 #define SCSIOP_ERASE 0x19 #define SCSIOP_MODE_SENSE 0x1A #define SCSIOP_START_STOP_UNIT 0x1B #define SCSIOP_STOP_PRINT 0x1B #define SCSIOP_LOAD_UNLOAD 0x1B #define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C #define SCSIOP_SEND_DIAGNOSTIC 0x1D #define SCSIOP_MEDIUM_REMOVAL 0x1E // 10-byte commands #define SCSIOP_READ_FORMATTED_CAPACITY 0x23 #define SCSIOP_READ_CAPACITY 0x25 #define SCSIOP_READ 0x28 #define SCSIOP_WRITE 0x2A #define SCSIOP_SEEK 0x2B #define SCSIOP_LOCATE 0x2B #define SCSIOP_POSITION_TO_ELEMENT 0x2B #define SCSIOP_WRITE_VERIFY 0x2E #define SCSIOP_VERIFY 0x2F #define SCSIOP_SEARCH_DATA_HIGH 0x30 #define SCSIOP_SEARCH_DATA_EQUAL 0x31 #define SCSIOP_SEARCH_DATA_LOW 0x32 #define SCSIOP_SET_LIMITS 0x33 #define SCSIOP_READ_POSITION 0x34 #define SCSIOP_SYNCHRONIZE_CACHE 0x35 #define SCSIOP_COMPARE 0x39 #define SCSIOP_COPY_COMPARE 0x3A #define SCSIOP_WRITE_DATA_BUFF 0x3B #define SCSIOP_READ_DATA_BUFF 0x3C #define SCSIOP_CHANGE_DEFINITION 0x40 #define SCSIOP_READ_SUB_CHANNEL 0x42 #define SCSIOP_READ_TOC 0x43 #define SCSIOP_READ_HEADER 0x44 #define SCSIOP_PLAY_AUDIO 0x45 #define SCSIOP_GET_CONFIGURATION 0x46 #define SCSIOP_PLAY_AUDIO_MSF 0x47 #define SCSIOP_PLAY_TRACK_INDEX 0x48 #define SCSIOP_PLAY_TRACK_RELATIVE 0x49 #define SCSIOP_GET_EVENT_STATUS 0x4A #define SCSIOP_PAUSE_RESUME 0x4B #define SCSIOP_LOG_SELECT 0x4C #define SCSIOP_LOG_SENSE 0x4D #define SCSIOP_STOP_PLAY_SCAN 0x4E #define SCSIOP_READ_DISK_INFORMATION 0x51 #define SCSIOP_READ_TRACK_INFORMATION 0x52 #define SCSIOP_RESERVE_TRACK_RZONE 0x53 #define SCSIOP_SEND_OPC_INFORMATION 0x54 // optimum power calibration #define SCSIOP_MODE_SELECT10 0x55 #define SCSIOP_RESERVE_UNIT10 0x56 #define SCSIOP_RELEASE_UNIT10 0x57 #define SCSIOP_MODE_SENSE10 0x5A #define SCSIOP_CLOSE_TRACK_SESSION 0x5B #define SCSIOP_READ_BUFFER_CAPACITY 0x5C #define SCSIOP_SEND_CUE_SHEET 0x5D #define SCSIOP_PERSISTENT_RESERVE_IN 0x5E #define SCSIOP_PERSISTENT_RESERVE_OUT 0x5F // 12-byte commands #define SCSIOP_REPORT_LUNS 0xA0 #define SCSIOP_BLANK 0xA1 #define SCSIOP_SEND_KEY 0xA3 #define SCSIOP_REPORT_KEY 0xA4 #define SCSIOP_MOVE_MEDIUM 0xA5 #define SCSIOP_LOAD_UNLOAD_SLOT 0xA6 #define SCSIOP_EXCHANGE_MEDIUM 0xA6 #define SCSIOP_SET_READ_AHEAD 0xA7 #define SCSIOP_READ_DVD_STRUCTURE 0xAD #define SCSIOP_REQUEST_VOL_ELEMENT 0xB5 #define SCSIOP_SEND_VOLUME_TAG 0xB6 #define SCSIOP_READ_ELEMENT_STATUS 0xB8 #define SCSIOP_READ_CD_MSF 0xB9 #define SCSIOP_SCAN_CD 0xBA #define SCSIOP_SET_CD_SPEED 0xBB #define SCSIOP_PLAY_CD 0xBC #define SCSIOP_MECHANISM_STATUS 0xBD #define SCSIOP_READ_CD 0xBE #define SCSIOP_SEND_DVD_STRUCTURE 0xBF #define SCSIOP_INIT_ELEMENT_RANGE 0xE7 // // If the IMMED bit is 1, status is returned as soon // as the operation is initiated. If the IMMED bit // is 0, status is not returned until the operation // is completed. // #define CDB_RETURN_ON_COMPLETION 0 #define CDB_RETURN_IMMEDIATE 1 // end_ntminitape // // CDB Force media access used in extended read and write commands. // #define CDB_FORCE_MEDIA_ACCESS 0x08 // // Denon CD ROM operation codes // #define SCSIOP_DENON_EJECT_DISC 0xE6 #define SCSIOP_DENON_STOP_AUDIO 0xE7 #define SCSIOP_DENON_PLAY_AUDIO 0xE8 #define SCSIOP_DENON_READ_TOC 0xE9 #define SCSIOP_DENON_READ_SUBCODE 0xEB // // SCSI Bus Messages // #define SCSIMESS_ABORT 0x06 #define SCSIMESS_ABORT_WITH_TAG 0x0D #define SCSIMESS_BUS_DEVICE_RESET 0X0C #define SCSIMESS_CLEAR_QUEUE 0X0E #define SCSIMESS_COMMAND_COMPLETE 0X00 #define SCSIMESS_DISCONNECT 0X04 #define SCSIMESS_EXTENDED_MESSAGE 0X01 #define SCSIMESS_IDENTIFY 0X80 #define SCSIMESS_IDENTIFY_WITH_DISCON 0XC0 #define SCSIMESS_IGNORE_WIDE_RESIDUE 0X23 #define SCSIMESS_INITIATE_RECOVERY 0X0F #define SCSIMESS_INIT_DETECTED_ERROR 0X05 #define SCSIMESS_LINK_CMD_COMP 0X0A #define SCSIMESS_LINK_CMD_COMP_W_FLAG 0X0B #define SCSIMESS_MESS_PARITY_ERROR 0X09 #define SCSIMESS_MESSAGE_REJECT 0X07 #define SCSIMESS_NO_OPERATION 0X08 #define SCSIMESS_HEAD_OF_QUEUE_TAG 0X21 #define SCSIMESS_ORDERED_QUEUE_TAG 0X22 #define SCSIMESS_SIMPLE_QUEUE_TAG 0X20 #define SCSIMESS_RELEASE_RECOVERY 0X10 #define SCSIMESS_RESTORE_POINTERS 0X03 #define SCSIMESS_SAVE_DATA_POINTER 0X02 #define SCSIMESS_TERMINATE_IO_PROCESS 0X11 // // SCSI Extended Message operation codes // #define SCSIMESS_MODIFY_DATA_POINTER 0X00 #define SCSIMESS_SYNCHRONOUS_DATA_REQ 0X01 #define SCSIMESS_WIDE_DATA_REQUEST 0X03 // // SCSI Extended Message Lengths // #define SCSIMESS_MODIFY_DATA_LENGTH 5 #define SCSIMESS_SYNCH_DATA_LENGTH 3 #define SCSIMESS_WIDE_DATA_LENGTH 2 // // SCSI extended message structure // #pragma pack (1) typedef struct _SCSI_EXTENDED_MESSAGE { UCHAR InitialMessageCode; UCHAR MessageLength; UCHAR MessageType; union _EXTENDED_ARGUMENTS { struct { UCHAR Modifier[4]; } Modify; struct { UCHAR TransferPeriod; UCHAR ReqAckOffset; } Synchronous; struct{ UCHAR Width; } Wide; }ExtendedArguments; }SCSI_EXTENDED_MESSAGE, *PSCSI_EXTENDED_MESSAGE; #pragma pack () // // SCSI bus status codes. // #define SCSISTAT_GOOD 0x00 #define SCSISTAT_CHECK_CONDITION 0x02 #define SCSISTAT_CONDITION_MET 0x04 #define SCSISTAT_BUSY 0x08 #define SCSISTAT_INTERMEDIATE 0x10 #define SCSISTAT_INTERMEDIATE_COND_MET 0x14 #define SCSISTAT_RESERVATION_CONFLICT 0x18 #define SCSISTAT_COMMAND_TERMINATED 0x22 #define SCSISTAT_QUEUE_FULL 0x28 // // Enable Vital Product Data Flag (EVPD) // used with INQUIRY command. // #define CDB_INQUIRY_EVPD 0x01 // // Defines for format CDB // #define LUN0_FORMAT_SAVING_DEFECT_LIST 0 #define USE_DEFAULTMSB 0 #define USE_DEFAULTLSB 0 #define START_UNIT_CODE 0x01 #define STOP_UNIT_CODE 0x00 // // Inquiry buffer structure. This is the data returned from the target // after it receives an inquiry. // // This structure may be extended by the number of bytes specified // in the field AdditionalLength. The defined size constant only // includes fields through ProductRevisionLevel. // // The NT SCSI drivers are only interested in the first 36 bytes of data. // #define INQUIRYDATABUFFERSIZE 36 typedef struct _INQUIRYDATA { UCHAR DeviceType : 5; UCHAR DeviceTypeQualifier : 3; UCHAR DeviceTypeModifier : 7; UCHAR RemovableMedia : 1; union { UCHAR Versions; struct { UCHAR ANSIVersion : 3; UCHAR ECMAVersion : 3; UCHAR ISOVersion : 2; }; }; UCHAR ResponseDataFormat : 4; UCHAR HiSupport : 1; UCHAR NormACA : 1; UCHAR TerminateTask : 1; UCHAR AERC : 1; UCHAR AdditionalLength; UCHAR Reserved; UCHAR Addr16 : 1; // defined only for SIP devices. UCHAR Addr32 : 1; // defined only for SIP devices. UCHAR AckReqQ: 1; // defined only for SIP devices. UCHAR MediumChanger : 1; UCHAR MultiPort : 1; UCHAR ReservedBit2 : 1; UCHAR EnclosureServices : 1; UCHAR ReservedBit3 : 1; UCHAR SoftReset : 1; UCHAR CommandQueue : 1; UCHAR TransferDisable : 1; // defined only for SIP devices. UCHAR LinkedCommands : 1; UCHAR Synchronous : 1; // defined only for SIP devices. UCHAR Wide16Bit : 1; // defined only for SIP devices. UCHAR Wide32Bit : 1; // defined only for SIP devices. UCHAR RelativeAddressing : 1; UCHAR VendorId[8]; UCHAR ProductId[16]; UCHAR ProductRevisionLevel[4]; UCHAR VendorSpecific[20]; UCHAR Reserved3[40]; } INQUIRYDATA, *PINQUIRYDATA; // // Inquiry defines. Used to interpret data returned from target as result // of inquiry command. // // DeviceType field // #define DIRECT_ACCESS_DEVICE 0x00 // disks #define SEQUENTIAL_ACCESS_DEVICE 0x01 // tapes #define PRINTER_DEVICE 0x02 // printers #define PROCESSOR_DEVICE 0x03 // scanners, printers, etc #define WRITE_ONCE_READ_MULTIPLE_DEVICE 0x04 // worms #define READ_ONLY_DIRECT_ACCESS_DEVICE 0x05 // cdroms #define SCANNER_DEVICE 0x06 // scanners #define OPTICAL_DEVICE 0x07 // optical disks #define MEDIUM_CHANGER 0x08 // jukebox #define COMMUNICATION_DEVICE 0x09 // network #define LOGICAL_UNIT_NOT_PRESENT_DEVICE 0x7F #define DEVICE_QUALIFIER_ACTIVE 0x00 #define DEVICE_QUALIFIER_NOT_ACTIVE 0x01 #define DEVICE_QUALIFIER_NOT_SUPPORTED 0x03 // // DeviceTypeQualifier field // #define DEVICE_CONNECTED 0x00 // // Vital Product Data Pages // // // Unit Serial Number Page (page code 0x80) // // Provides a product serial number for the target or the logical unit. // typedef struct _VPD_SERIAL_NUMBER_PAGE { UCHAR DeviceType : 5; UCHAR DeviceTypeQualifier : 3; UCHAR PageCode; UCHAR Reserved; UCHAR PageLength; UCHAR SerialNumber[0]; } VPD_SERIAL_NUMBER_PAGE, *PVPD_SERIAL_NUMBER_PAGE; // // Device Identification Page (page code 0x83) // Provides the means to retrieve zero or more identification descriptors // applying to the logical unit. // typedef enum _VPD_CODE_SET { VpdCodeSetReserved = 0, VpdCodeSetBinary = 1, VpdCodeSetAscii = 2 } VPD_CODE_SET, *PVPD_CODE_SET; typedef enum _VPD_IDENTIFIER_TYPE { VpdIdentifierTypeVendorSpecific = 0, VpdIdentifierTypeVendorId = 1, VpdIdentifierTypeEUI64 = 2, VpdIdentifierTypeFCPHName = 3, VpdIdentifierTypePortRelative = 4 } VPD_IDENTIFIER_TYPE, *PVPD_IDENTIFIER_TYPE; typedef struct _VPD_IDENTIFICATION_DESCRIPTOR { UCHAR CodeSet : 4; // VPD_CODE_SET UCHAR Reserved : 4; UCHAR IdentifierType : 4; // VPD_IDENTIFIER_TYPE UCHAR Association : 2; UCHAR Reserved2 : 2; UCHAR Reserved3; UCHAR IdentifierLength; UCHAR Identifier[0]; } VPD_IDENTIFICATION_DESCRIPTOR, *PVPD_IDENTIFICATION_DESCRIPTOR; typedef struct _VPD_IDENTIFICATION_PAGE { UCHAR DeviceType : 5; UCHAR DeviceTypeQualifier : 3; UCHAR PageCode; UCHAR Reserved; UCHAR PageLength; // // The following field is actually a variable length array of identification // descriptors. Unfortunately there's no C notation for an array of // variable length structures so we're forced to just pretend. // // VPD_IDENTIFICATION_DESCRIPTOR Descriptors[0]; UCHAR Descriptors[0]; } VPD_IDENTIFICATION_PAGE, *PVPD_IDENTIFICATION_PAGE; // // Supported Vital Product Data Pages Page (page code 0x00) // Contains a list of the vital product data page cods supported by the target // or logical unit. // typedef struct _VPD_SUPPORTED_PAGES_PAGE { UCHAR DeviceType : 5; UCHAR DeviceTypeQualifier : 3; UCHAR PageCode; UCHAR Reserved; UCHAR PageLength; UCHAR SupportedPageList[0]; } VPD_SUPPORTED_PAGES_PAGE, *PVPD_SUPPORTED_PAGES_PAGE; #define VPD_MAX_BUFFER_SIZE 0xff #define VPD_SUPPORTED_PAGES 0x00 #define VPD_SERIAL_NUMBER 0x80 #define VPD_DEVICE_IDENTIFIERS 0x83 // // Persistent Reservation Definitions. // // // PERSISTENT_RESERVE_* definitions // #define RESERVATION_ACTION_READ_KEYS 0x00 #define RESERVATION_ACTION_READ_RESERVATIONS 0x01 #define RESERVATION_ACTION_REGISTER 0x00 #define RESERVATION_ACTION_RESERVE 0x01 #define RESERVATION_ACTION_RELEASE 0x02 #define RESERVATION_ACTION_CLEAR 0x03 #define RESERVATION_ACTION_PREEMPT 0x04 #define RESERVATION_ACTION_PREEMPT_ABORT 0x05 #define RESERVATION_ACTION_REGISTER_IGNORE_EXISTING 0x06 #define RESERVATION_SCOPE_LU 0x00 #define RESERVATION_SCOPE_ELEMENT 0x02 #define RESERVATION_TYPE_WRITE_EXCLUSIVE 0x01 #define RESERVATION_TYPE_EXCLUSIVE 0x03 #define RESERVATION_TYPE_WRITE_EXCLUSIVE_REGISTRANTS 0x05 #define RESERVATION_TYPE_EXCLUSIVE_REGISTRANTS 0x06 // // Structures for reserve in command. // typedef struct { UCHAR Generation[4]; UCHAR AdditionalLength[4]; UCHAR ReservationKeyList[0][8]; } PRI_REGISTRATION_LIST, *PPRI_REGISTRATION_LIST; typedef struct { UCHAR ReservationKey[8]; UCHAR ScopeSpecificAddress[4]; UCHAR Reserved; UCHAR Type : 4; UCHAR Scope : 4; UCHAR Obsolete[2]; } PRI_RESERVATION_DESCRIPTOR, *PPRI_RESERVATION_DESCRIPTOR; typedef struct { UCHAR Generation[4]; UCHAR AdditionalLength[4]; PRI_RESERVATION_DESCRIPTOR Reservations[0]; } PRI_RESERVATION_LIST, *PPRI_RESERVATION_LIST; // // Structures for reserve out command. // typedef struct { UCHAR ReservationKey[8]; UCHAR ServiceActionReservationKey[8]; UCHAR ScopeSpecificAddress[4]; UCHAR ActivatePersistThroughPowerLoss : 1; UCHAR Reserved1 : 7; UCHAR Reserved2; UCHAR Obsolete[2]; } PRO_PARAMETER_LIST, *PPRO_PARAMETER_LIST; // // Sense Data Format // typedef struct _SENSE_DATA { UCHAR ErrorCode:7; UCHAR Valid:1; UCHAR SegmentNumber; UCHAR SenseKey:4; UCHAR Reserved:1; UCHAR IncorrectLength:1; UCHAR EndOfMedia:1; UCHAR FileMark:1; UCHAR Information[4]; UCHAR AdditionalSenseLength; UCHAR CommandSpecificInformation[4]; UCHAR AdditionalSenseCode; UCHAR AdditionalSenseCodeQualifier; UCHAR FieldReplaceableUnitCode; UCHAR SenseKeySpecific[3]; } SENSE_DATA, *PSENSE_DATA; // // Default request sense buffer size // #define SENSE_BUFFER_SIZE 18 // // Maximum request sense buffer size // #define MAX_SENSE_BUFFER_SIZE 255 // // Maximum number of additional sense bytes. // #define MAX_ADDITIONAL_SENSE_BYTES (MAX_SENSE_BUFFER_SIZE - SENSE_BUFFER_SIZE) // // Sense codes // #define SCSI_SENSE_NO_SENSE 0x00 #define SCSI_SENSE_RECOVERED_ERROR 0x01 #define SCSI_SENSE_NOT_READY 0x02 #define SCSI_SENSE_MEDIUM_ERROR 0x03 #define SCSI_SENSE_HARDWARE_ERROR 0x04 #define SCSI_SENSE_ILLEGAL_REQUEST 0x05 #define SCSI_SENSE_UNIT_ATTENTION 0x06 #define SCSI_SENSE_DATA_PROTECT 0x07 #define SCSI_SENSE_BLANK_CHECK 0x08 #define SCSI_SENSE_UNIQUE 0x09 #define SCSI_SENSE_COPY_ABORTED 0x0A #define SCSI_SENSE_ABORTED_COMMAND 0x0B #define SCSI_SENSE_EQUAL 0x0C #define SCSI_SENSE_VOL_OVERFLOW 0x0D #define SCSI_SENSE_MISCOMPARE 0x0E #define SCSI_SENSE_RESERVED 0x0F // // Additional tape bit // #define SCSI_ILLEGAL_LENGTH 0x20 #define SCSI_EOM 0x40 #define SCSI_FILE_MARK 0x80 // // Additional Sense codes // #define SCSI_ADSENSE_NO_SENSE 0x00 #define SCSI_ADSENSE_LUN_NOT_READY 0x04 #define SCSI_ADSENSE_TRACK_ERROR 0x14 #define SCSI_ADSENSE_SEEK_ERROR 0x15 #define SCSI_ADSENSE_REC_DATA_NOECC 0x17 #define SCSI_ADSENSE_REC_DATA_ECC 0x18 #define SCSI_ADSENSE_ILLEGAL_COMMAND 0x20 #define SCSI_ADSENSE_ILLEGAL_BLOCK 0x21 #define SCSI_ADSENSE_INVALID_CDB 0x24 #define SCSI_ADSENSE_INVALID_LUN 0x25 #define SCSI_ADSENSE_WRITE_PROTECT 0x27 #define SCSI_ADWRITE_PROTECT 0x27 // Legacy define #define SCSI_ADSENSE_MEDIUM_CHANGED 0x28 #define SCSI_ADSENSE_BUS_RESET 0x29 #define SCSI_ADSENSE_INVALID_MEDIA 0x30 #define SCSI_ADSENSE_NO_MEDIA_IN_DEVICE 0x3a #define SCSI_ADSENSE_POSITION_ERROR 0x3b #define SCSI_ADSENSE_OPERATOR_REQUEST 0x5a // see below // the second is for legacy apps. #define SCSI_ADSENSE_FAILURE_PREDICTION_THRESHOLD_EXCEEDED 0x5d #define SCSI_FAILURE_PREDICTION_THRESHOLD_EXCEEDED SCSI_ADSENSE_FAILURE_PREDICTION_THRESHOLD_EXCEEDED #define SCSI_ADSENSE_COPY_PROTECTION_FAILURE 0x6f #define SCSI_ADSENSE_VENDOR_UNIQUE 0x80 #define SCSI_ADSENSE_MUSIC_AREA 0xA0 #define SCSI_ADSENSE_DATA_AREA 0xA1 #define SCSI_ADSENSE_VOLUME_OVERFLOW 0xA7 // // SCSI_ADSENSE_LUN_NOT_READY (0x04) qualifiers // #define SCSI_SENSEQ_CAUSE_NOT_REPORTABLE 0x00 #define SCSI_SENSEQ_BECOMING_READY 0x01 #define SCSI_SENSEQ_INIT_COMMAND_REQUIRED 0x02 #define SCSI_SENSEQ_MANUAL_INTERVENTION_REQUIRED 0x03 #define SCSI_SENSEQ_FORMAT_IN_PROGRESS 0x04 #define SCSI_SENSEQ_REBUILD_IN_PROGRESS 0x05 #define SCSI_SENSEQ_RECALCULATION_IN_PROGRESS 0x06 #define SCSI_SENSEQ_OPERATION_IN_PROGRESS 0x07 #define SCSI_SENSEQ_LONG_WRITE_IN_PROGRESS 0x08 // // SCSI_ADSENSE_NO_SENSE (0x00) qualifiers // #define SCSI_SENSEQ_FILEMARK_DETECTED 0x01 #define SCSI_SENSEQ_END_OF_MEDIA_DETECTED 0x02 #define SCSI_SENSEQ_SETMARK_DETECTED 0x03 #define SCSI_SENSEQ_BEGINNING_OF_MEDIA_DETECTED 0x04 // // SCSI_ADSENSE_ILLEGAL_BLOCK (0x21) qualifiers // #define SCSI_SENSEQ_ILLEGAL_ELEMENT_ADDR 0x01 // // SCSI_ADSENSE_POSITION_ERROR (0x3b) qualifiers // #define SCSI_SENSEQ_DESTINATION_FULL 0x0d #define SCSI_SENSEQ_SOURCE_EMPTY 0x0e // // SCSI_ADSENSE_INVALID_MEDIA (0x30) qualifiers // #define SCSI_SENSEQ_INCOMPATIBLE_MEDIA_INSTALLED 0x00 #define SCSI_SENSEQ_UNKNOWN_FORMAT 0x01 #define SCSI_SENSEQ_INCOMPATIBLE_FORMAT 0x02 #define SCSI_SENSEQ_CLEANING_CARTRIDGE_INSTALLED 0x03 // // SCSI_ADSENSE_OPERATOR_REQUEST (0x5a) qualifiers // #define SCSI_SENSEQ_STATE_CHANGE_INPUT 0x00 // generic request #define SCSI_SENSEQ_MEDIUM_REMOVAL 0x01 #define SCSI_SENSEQ_WRITE_PROTECT_ENABLE 0x02 #define SCSI_SENSEQ_WRITE_PROTECT_DISABLE 0x03 // // SCSI_ADSENSE_COPY_PROTECTION_FAILURE (0x6f) qualifiers // #define SCSI_SENSEQ_AUTHENTICATION_FAILURE 0x00 #define SCSI_SENSEQ_KEY_NOT_PRESENT 0x01 #define SCSI_SENSEQ_KEY_NOT_ESTABLISHED 0x02 #define SCSI_SENSEQ_READ_OF_SCRAMBLED_SECTOR_WITHOUT_AUTHENTICATION 0x03 #define SCSI_SENSEQ_MEDIA_CODE_MISMATCHED_TO_LOGICAL_UNIT 0x04 #define SCSI_SENSEQ_LOGICAL_UNIT_RESET_COUNT_ERROR 0x05 // end_ntminitape // // SCSI IO Device Control Codes // #define FILE_DEVICE_SCSI 0x0000001b #define IOCTL_SCSI_EXECUTE_IN ((FILE_DEVICE_SCSI << 16) + 0x0011) #define IOCTL_SCSI_EXECUTE_OUT ((FILE_DEVICE_SCSI << 16) + 0x0012) #define IOCTL_SCSI_EXECUTE_NONE ((FILE_DEVICE_SCSI << 16) + 0x0013) // // SMART support in atapi // #define IOCTL_SCSI_MINIPORT_SMART_VERSION ((FILE_DEVICE_SCSI << 16) + 0x0500) #define IOCTL_SCSI_MINIPORT_IDENTIFY ((FILE_DEVICE_SCSI << 16) + 0x0501) #define IOCTL_SCSI_MINIPORT_READ_SMART_ATTRIBS ((FILE_DEVICE_SCSI << 16) + 0x0502) #define IOCTL_SCSI_MINIPORT_READ_SMART_THRESHOLDS ((FILE_DEVICE_SCSI << 16) + 0x0503) #define IOCTL_SCSI_MINIPORT_ENABLE_SMART ((FILE_DEVICE_SCSI << 16) + 0x0504) #define IOCTL_SCSI_MINIPORT_DISABLE_SMART ((FILE_DEVICE_SCSI << 16) + 0x0505) #define IOCTL_SCSI_MINIPORT_RETURN_STATUS ((FILE_DEVICE_SCSI << 16) + 0x0506) #define IOCTL_SCSI_MINIPORT_ENABLE_DISABLE_AUTOSAVE ((FILE_DEVICE_SCSI << 16) + 0x0507) #define IOCTL_SCSI_MINIPORT_SAVE_ATTRIBUTE_VALUES ((FILE_DEVICE_SCSI << 16) + 0x0508) #define IOCTL_SCSI_MINIPORT_EXECUTE_OFFLINE_DIAGS ((FILE_DEVICE_SCSI << 16) + 0x0509) #define IOCTL_SCSI_MINIPORT_ENABLE_DISABLE_AUTO_OFFLINE ((FILE_DEVICE_SCSI << 16) + 0x050a) #define IOCTL_SCSI_MINIPORT_READ_SMART_LOG ((FILE_DEVICE_SCSI << 16) + 0x050b) #define IOCTL_SCSI_MINIPORT_WRITE_SMART_LOG ((FILE_DEVICE_SCSI << 16) + 0x050c) // // CLUSTER support // deliberately skipped some values to allow for expansion above. // #define IOCTL_SCSI_MINIPORT_NOT_QUORUM_CAPABLE ((FILE_DEVICE_SCSI << 16) + 0x0520) #define IOCTL_SCSI_MINIPORT_NOT_CLUSTER_CAPABLE ((FILE_DEVICE_SCSI << 16) + 0x0521) // // Read Capacity Data - returned in Big Endian format // typedef struct _READ_CAPACITY_DATA { ULONG LogicalBlockAddress; ULONG BytesPerBlock; } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA; // // Read Block Limits Data - returned in Big Endian format // This structure returns the maximum and minimum block // size for a TAPE device. // typedef struct _READ_BLOCK_LIMITS { UCHAR Reserved; UCHAR BlockMaximumSize[3]; UCHAR BlockMinimumSize[2]; } READ_BLOCK_LIMITS_DATA, *PREAD_BLOCK_LIMITS_DATA; // // Mode data structures. // // // Define Mode parameter header. // typedef struct _MODE_PARAMETER_HEADER { UCHAR ModeDataLength; UCHAR MediumType; UCHAR DeviceSpecificParameter; UCHAR BlockDescriptorLength; }MODE_PARAMETER_HEADER, *PMODE_PARAMETER_HEADER; typedef struct _MODE_PARAMETER_HEADER10 { UCHAR ModeDataLength[2]; UCHAR MediumType; UCHAR DeviceSpecificParameter; UCHAR Reserved[2]; UCHAR BlockDescriptorLength[2]; }MODE_PARAMETER_HEADER10, *PMODE_PARAMETER_HEADER10; #define MODE_FD_SINGLE_SIDE 0x01 #define MODE_FD_DOUBLE_SIDE 0x02 #define MODE_FD_MAXIMUM_TYPE 0x1E #define MODE_DSP_FUA_SUPPORTED 0x10 #define MODE_DSP_WRITE_PROTECT 0x80 // // Define the mode parameter block. // typedef struct _MODE_PARAMETER_BLOCK { UCHAR DensityCode; UCHAR NumberOfBlocks[3]; UCHAR Reserved; UCHAR BlockLength[3]; }MODE_PARAMETER_BLOCK, *PMODE_PARAMETER_BLOCK; // // Define Disconnect-Reconnect page. // typedef struct _MODE_DISCONNECT_PAGE { UCHAR PageCode : 6; UCHAR Reserved : 1; UCHAR PageSavable : 1; UCHAR PageLength; UCHAR BufferFullRatio; UCHAR BufferEmptyRatio; UCHAR BusInactivityLimit[2]; UCHAR BusDisconnectTime[2]; UCHAR BusConnectTime[2]; UCHAR MaximumBurstSize[2]; UCHAR DataTransferDisconnect : 2; UCHAR Reserved2[3]; }MODE_DISCONNECT_PAGE, *PMODE_DISCONNECT_PAGE; // // Define mode caching page. // typedef struct _MODE_CACHING_PAGE { UCHAR PageCode : 6; UCHAR Reserved : 1; UCHAR PageSavable : 1; UCHAR PageLength; UCHAR ReadDisableCache : 1; UCHAR MultiplicationFactor : 1; UCHAR WriteCacheEnable : 1; UCHAR Reserved2 : 5; UCHAR WriteRetensionPriority : 4; UCHAR ReadRetensionPriority : 4; UCHAR DisablePrefetchTransfer[2]; UCHAR MinimumPrefetch[2]; UCHAR MaximumPrefetch[2]; UCHAR MaximumPrefetchCeiling[2]; }MODE_CACHING_PAGE, *PMODE_CACHING_PAGE; // // Define write parameters cdrom page // typedef struct _MODE_CDROM_WRITE_PARAMETERS_PAGE { UCHAR PageLength; // 0x32 ?? UCHAR WriteType : 4; UCHAR TestWrite : 1; UCHAR LinkSizeValid : 1; UCHAR BufferUnderrunFreeEnabled : 1; UCHAR Reserved2 : 1; UCHAR TrackMode : 4; UCHAR Copy : 1; UCHAR FixedPacket : 1; UCHAR MultiSession : 2; UCHAR DataBlockType : 4; UCHAR Reserved3 : 4; UCHAR LinkSize; UCHAR Reserved4; UCHAR HostApplicationCode : 6; UCHAR Reserved5 : 2; UCHAR SessionFormat; UCHAR Reserved6; UCHAR PacketSize[4]; UCHAR AudioPauseLength[2]; UCHAR Reserved7 : 7; UCHAR MediaCatalogNumberValid : 1; UCHAR MediaCatalogNumber[13]; UCHAR MediaCatalogNumberZero; UCHAR MediaCatalogNumberAFrame; UCHAR Reserved8 : 7; UCHAR ISRCValid : 1; UCHAR ISRCCountry[2]; UCHAR ISRCOwner[3]; UCHAR ISRCRecordingYear[2]; UCHAR ISRCSerialNumber[5]; UCHAR ISRCZero; UCHAR ISRCAFrame; UCHAR ISRCReserved; UCHAR SubHeaderData[4]; } MODE_CDROM_WRITE_PARAMETERS_PAGE, *PMODE_CDROM_WRITE_PARAMETERS_PAGE; // // Define mode flexible disk page. // typedef struct _MODE_FLEXIBLE_DISK_PAGE { UCHAR PageCode : 6; UCHAR Reserved : 1; UCHAR PageSavable : 1; UCHAR PageLength; UCHAR TransferRate[2]; UCHAR NumberOfHeads; UCHAR SectorsPerTrack; UCHAR BytesPerSector[2]; UCHAR NumberOfCylinders[2]; UCHAR StartWritePrecom[2]; UCHAR StartReducedCurrent[2]; UCHAR StepRate[2]; UCHAR StepPluseWidth; UCHAR HeadSettleDelay[2]; UCHAR MotorOnDelay; UCHAR MotorOffDelay; UCHAR Reserved2 : 5; UCHAR MotorOnAsserted : 1; UCHAR StartSectorNumber : 1; UCHAR TrueReadySignal : 1; UCHAR StepPlusePerCyclynder : 4; UCHAR Reserved3 : 4; UCHAR WriteCompenstation; UCHAR HeadLoadDelay; UCHAR HeadUnloadDelay; UCHAR Pin2Usage : 4; UCHAR Pin34Usage : 4; UCHAR Pin1Usage : 4; UCHAR Pin4Usage : 4; UCHAR MediumRotationRate[2]; UCHAR Reserved4[2]; }MODE_FLEXIBLE_DISK_PAGE, *PMODE_FLEXIBLE_DISK_PAGE; // // Define mode format page. // typedef struct _MODE_FORMAT_PAGE { UCHAR PageCode : 6; UCHAR Reserved : 1; UCHAR PageSavable : 1; UCHAR PageLength; UCHAR TracksPerZone[2]; UCHAR AlternateSectorsPerZone[2]; UCHAR AlternateTracksPerZone[2]; UCHAR AlternateTracksPerLogicalUnit[2]; UCHAR SectorsPerTrack[2]; UCHAR BytesPerPhysicalSector[2]; UCHAR Interleave[2]; UCHAR TrackSkewFactor[2]; UCHAR CylinderSkewFactor[2]; UCHAR Reserved2 : 4; UCHAR SurfaceFirst : 1; UCHAR RemovableMedia : 1; UCHAR HardSectorFormating : 1; UCHAR SoftSectorFormating : 1; UCHAR Reserved3[3]; }MODE_FORMAT_PAGE, *PMODE_FORMAT_PAGE; // // Define rigid disk driver geometry page. // typedef struct _MODE_RIGID_GEOMETRY_PAGE { UCHAR PageCode : 6; UCHAR Reserved : 1; UCHAR PageSavable : 1; UCHAR PageLength; UCHAR NumberOfCylinders[3]; UCHAR NumberOfHeads; UCHAR StartWritePrecom[3]; UCHAR StartReducedCurrent[3]; UCHAR DriveStepRate[2]; UCHAR LandZoneCyclinder[3]; UCHAR RotationalPositionLock : 2; UCHAR Reserved2 : 6; UCHAR RotationOffset; UCHAR Reserved3; UCHAR RoataionRate[2]; UCHAR Reserved4[2]; }MODE_RIGID_GEOMETRY_PAGE, *PMODE_RIGID_GEOMETRY_PAGE; // // Define read write recovery page // typedef struct _MODE_READ_WRITE_RECOVERY_PAGE { UCHAR PageCode : 6; UCHAR Reserved1 : 1; UCHAR PSBit : 1; UCHAR PageLength; UCHAR DCRBit : 1; UCHAR DTEBit : 1; UCHAR PERBit : 1; UCHAR EERBit : 1; UCHAR RCBit : 1; UCHAR TBBit : 1; UCHAR ARRE : 1; UCHAR AWRE : 1; UCHAR ReadRetryCount; UCHAR Reserved4[4]; UCHAR WriteRetryCount; UCHAR Reserved5[3]; } MODE_READ_WRITE_RECOVERY_PAGE, *PMODE_READ_WRITE_RECOVERY_PAGE; // // Define read recovery page - cdrom // typedef struct _MODE_READ_RECOVERY_PAGE { UCHAR PageCode : 6; UCHAR Reserved1 : 1; UCHAR PSBit : 1; UCHAR PageLength; UCHAR DCRBit : 1; UCHAR DTEBit : 1; UCHAR PERBit : 1; UCHAR Reserved2 : 1; UCHAR RCBit : 1; UCHAR TBBit : 1; UCHAR Reserved3 : 2; UCHAR ReadRetryCount; UCHAR Reserved4[4]; } MODE_READ_RECOVERY_PAGE, *PMODE_READ_RECOVERY_PAGE; // // Define Informational Exception Control Page. Used for failure prediction // typedef struct _MODE_INFO_EXCEPTIONS { UCHAR PageCode : 6; UCHAR Reserved1 : 1; UCHAR PSBit : 1; UCHAR PageLength; union { UCHAR Flags; struct { UCHAR LogErr : 1; UCHAR Reserved2 : 1; UCHAR Test : 1; UCHAR Dexcpt : 1; UCHAR Reserved3 : 3; UCHAR Perf : 1; }; }; UCHAR ReportMethod : 4; UCHAR Reserved4 : 4; UCHAR IntervalTimer[4]; UCHAR ReportCount[4]; } MODE_INFO_EXCEPTIONS, *PMODE_INFO_EXCEPTIONS; // // Begin C/DVD 0.9 definitions // // // Power Condition Mode Page Format // typedef struct _POWER_CONDITION_PAGE { UCHAR PageCode : 6; // 0x1A UCHAR Reserved : 1; UCHAR PSBit : 1; UCHAR PageLength; // 0x0A UCHAR Reserved2; UCHAR Standby : 1; UCHAR Idle : 1; UCHAR Reserved3 : 6; UCHAR IdleTimer[4]; UCHAR StandbyTimer[4]; } POWER_CONDITION_PAGE, *PPOWER_CONDITION_PAGE; // // CD-Audio Control Mode Page Format // typedef struct _CDDA_OUTPUT_PORT { UCHAR ChannelSelection : 4; UCHAR Reserved : 4; UCHAR Volume; } CDDA_OUTPUT_PORT, *PCDDA_OUTPUT_PORT; typedef struct _CDAUDIO_CONTROL_PAGE { UCHAR PageCode : 6; // 0x0E UCHAR Reserved : 1; UCHAR PSBit : 1; UCHAR PageLength; // 0x0E UCHAR Reserved2 : 1; UCHAR StopOnTrackCrossing : 1; // Default 0 UCHAR Immediate : 1; // Always 1 UCHAR Reserved3 : 5; UCHAR Reserved4[3]; UCHAR Obsolete[2]; CDDA_OUTPUT_PORT CDDAOutputPorts[4]; } CDAUDIO_CONTROL_PAGE, *PCDAUDIO_CONTROL_PAGE; #define CDDA_CHANNEL_MUTED 0x0 #define CDDA_CHANNEL_ZERO 0x1 #define CDDA_CHANNEL_ONE 0x2 #define CDDA_CHANNEL_TWO 0x4 #define CDDA_CHANNEL_THREE 0x8 // // C/DVD Feature Set Support & Version Page // typedef struct _CDVD_FEATURE_SET_PAGE { UCHAR PageCode : 6; // 0x18 UCHAR Reserved : 1; UCHAR PSBit : 1; UCHAR PageLength; // 0x16 UCHAR CDAudio[2]; UCHAR EmbeddedChanger[2]; UCHAR PacketSMART[2]; UCHAR PersistantPrevent[2]; UCHAR EventStatusNotification[2]; UCHAR DigitalOutput[2]; UCHAR CDSequentialRecordable[2]; UCHAR DVDSequentialRecordable[2]; UCHAR RandomRecordable[2]; UCHAR KeyExchange[2]; UCHAR Reserved2[2]; } CDVD_FEATURE_SET_PAGE, *PCDVD_FEATURE_SET_PAGE; // // CDVD Inactivity Time-out Page Format // typedef struct _CDVD_INACTIVITY_TIMEOUT_PAGE { UCHAR PageCode : 6; // 0x1D UCHAR Reserved : 1; UCHAR PSBit : 1; UCHAR PageLength; // 0x08 UCHAR Reserved2[2]; UCHAR SWPP : 1; UCHAR DISP : 1; UCHAR Reserved3 : 6; UCHAR Reserved4; UCHAR GroupOneMinimumTimeout[2]; UCHAR GroupTwoMinimumTimeout[2]; } CDVD_INACTIVITY_TIMEOUT_PAGE, *PCDVD_INACTIVITY_TIMEOUT_PAGE; // // CDVD Capabilities & Mechanism Status Page // #define CDVD_LMT_CADDY 0 #define CDVD_LMT_TRAY 1 #define CDVD_LMT_POPUP 2 #define CDVD_LMT_RESERVED1 3 #define CDVD_LMT_CHANGER_INDIVIDUAL 4 #define CDVD_LMT_CHANGER_CARTRIDGE 5 #define CDVD_LMT_RESERVED2 6 #define CDVD_LMT_RESERVED3 7 typedef struct _CDVD_CAPABILITIES_PAGE { UCHAR PageCode : 6; // 0x2A UCHAR Reserved : 1; UCHAR PSBit : 1; // offset 0 UCHAR PageLength; // 0x18 // offset 1 UCHAR CDRRead : 1; UCHAR CDERead : 1; UCHAR Method2 : 1; UCHAR DVDROMRead : 1; UCHAR DVDRRead : 1; UCHAR DVDRAMRead : 1; UCHAR Reserved2 : 2; // offset 2 UCHAR CDRWrite : 1; UCHAR CDEWrite : 1; UCHAR TestWrite : 1; UCHAR Reserved3 : 1; UCHAR DVDRWrite : 1; UCHAR DVDRAMWrite : 1; UCHAR Reserved4 : 2; // offset 3 UCHAR AudioPlay : 1; UCHAR Composite : 1; UCHAR DigitalPortOne : 1; UCHAR DigitalPortTwo : 1; UCHAR Mode2Form1 : 1; UCHAR Mode2Form2 : 1; UCHAR MultiSession : 1; UCHAR Reserved5 : 1; // offset 4 UCHAR CDDA : 1; UCHAR CDDAAccurate : 1; UCHAR RWSupported : 1; UCHAR RWDeinterleaved : 1; UCHAR C2Pointers : 1; UCHAR ISRC : 1; UCHAR UPC : 1; UCHAR ReadBarCodeCapable : 1; // offset 5 UCHAR Lock : 1; UCHAR LockState : 1; UCHAR PreventJumper : 1; UCHAR Eject : 1; UCHAR Reserved6 : 1; UCHAR LoadingMechanismType : 3; // offset 6 UCHAR SeparateVolume : 1; UCHAR SeperateChannelMute : 1; UCHAR SupportsDiskPresent : 1; UCHAR SWSlotSelection : 1; UCHAR SideChangeCapable : 1; UCHAR RWInLeadInReadable : 1; UCHAR Reserved7 : 2; // offset 7 UCHAR ObsoleteReserved[2]; // offset 8 UCHAR NumberVolumeLevels[2]; // offset 10 UCHAR BufferSize[2]; // offset 12 UCHAR ObsoleteReserved2[2]; // offset 14 UCHAR ObsoleteReserved3; // offset 16 UCHAR Reserved8 : 1; UCHAR BCK : 1; UCHAR RCK : 1; UCHAR LSBF : 1; UCHAR Length : 2; UCHAR Reserved9 : 2; // offset 17 UCHAR ObsoleteReserved4[2]; // offset 18 UCHAR ObsoleteReserved11[2]; // offset 20 // // NOTE: This mode page is two bytes too small in the release // version of the Windows2000 DDK. it also incorrectly // put the CopyManagementRevision at offset 20 instead // of offset 22, so fix that with a nameless union (for // backwards-compatibility with those who "fixed" it on // their own by looking at Reserved10[]). // union { UCHAR CopyManagementRevision[2]; // offset 22 UCHAR Reserved10[2]; }; //UCHAR Reserved12[2]; // offset 24 } CDVD_CAPABILITIES_PAGE, *PCDVD_CAPABILITIES_PAGE; typedef struct _LUN_LIST { UCHAR LunListLength[4]; // sizeof LunSize * 8 UCHAR Reserved[4]; UCHAR Lun[0][8]; // 4 level of addressing. 2 bytes each. } LUN_LIST, *PLUN_LIST; #define LOADING_MECHANISM_CADDY 0x00 #define LOADING_MECHANISM_TRAY 0x01 #define LOADING_MECHANISM_POPUP 0x02 #define LOADING_MECHANISM_INDIVIDUAL_CHANGER 0x04 #define LOADING_MECHANISM_CARTRIDGE_CHANGER 0x05 // // end C/DVD 0.9 mode page definitions // // Mode parameter list block descriptor - // set the block length for reading/writing // // #define MODE_BLOCK_DESC_LENGTH 8 #define MODE_HEADER_LENGTH 4 #define MODE_HEADER_LENGTH10 8 typedef struct _MODE_PARM_READ_WRITE { MODE_PARAMETER_HEADER ParameterListHeader; // List Header Format MODE_PARAMETER_BLOCK ParameterListBlock; // List Block Descriptor } MODE_PARM_READ_WRITE_DATA, *PMODE_PARM_READ_WRITE_DATA; // // CDROM audio control (0x0E) // #define CDB_AUDIO_PAUSE 0 #define CDB_AUDIO_RESUME 1 #define CDB_DEVICE_START 0x11 #define CDB_DEVICE_STOP 0x10 #define CDB_EJECT_MEDIA 0x10 #define CDB_LOAD_MEDIA 0x01 #define CDB_SUBCHANNEL_HEADER 0x00 #define CDB_SUBCHANNEL_BLOCK 0x01 #define CDROM_AUDIO_CONTROL_PAGE 0x0E #define MODE_SELECT_IMMEDIATE 0x04 #define MODE_SELECT_PFBIT 0x10 #define CDB_USE_MSF 0x01 typedef struct _PORT_OUTPUT { UCHAR ChannelSelection; UCHAR Volume; } PORT_OUTPUT, *PPORT_OUTPUT; typedef struct _AUDIO_OUTPUT { UCHAR CodePage; UCHAR ParameterLength; UCHAR Immediate; UCHAR Reserved[2]; UCHAR LbaFormat; UCHAR LogicalBlocksPerSecond[2]; PORT_OUTPUT PortOutput[4]; } AUDIO_OUTPUT, *PAUDIO_OUTPUT; // // Multisession CDROM // #define GET_LAST_SESSION 0x01 #define GET_SESSION_DATA 0x02; // // Atapi 2.5 changer // typedef struct _MECHANICAL_STATUS_INFORMATION_HEADER { UCHAR CurrentSlot : 5; UCHAR ChangerState : 2; UCHAR Fault : 1; UCHAR Reserved : 5; UCHAR MechanismState : 3; UCHAR CurrentLogicalBlockAddress[3]; UCHAR NumberAvailableSlots; UCHAR SlotTableLength[2]; } MECHANICAL_STATUS_INFORMATION_HEADER, *PMECHANICAL_STATUS_INFORMATION_HEADER; typedef struct _SLOT_TABLE_INFORMATION { UCHAR DiscChanged : 1; UCHAR Reserved : 6; UCHAR DiscPresent : 1; UCHAR Reserved2[3]; } SLOT_TABLE_INFORMATION, *PSLOT_TABLE_INFORMATION; typedef struct _MECHANICAL_STATUS { MECHANICAL_STATUS_INFORMATION_HEADER MechanicalStatusHeader; SLOT_TABLE_INFORMATION SlotTableInfo[1]; } MECHANICAL_STATUS, *PMECHANICAL_STATUS; // // This structure is used to convert little endian // ULONGs to SCSI CDB big endians values. // typedef union _EIGHT_BYTE { struct { UCHAR Byte0; UCHAR Byte1; UCHAR Byte2; UCHAR Byte3; UCHAR Byte4; UCHAR Byte5; UCHAR Byte6; UCHAR Byte7; }; ULONGLONG AsULongLong; } EIGHT_BYTE, *PEIGHT_BYTE; typedef union _FOUR_BYTE { struct { UCHAR Byte0; UCHAR Byte1; UCHAR Byte2; UCHAR Byte3; }; ULONG AsULong; } FOUR_BYTE, *PFOUR_BYTE; typedef union _TWO_BYTE { struct { UCHAR Byte0; UCHAR Byte1; }; USHORT AsUShort; } TWO_BYTE, *PTWO_BYTE; // // Byte reversing macro for converting // between big- and little-endian formats // #define REVERSE_BYTES_QUAD(Destination, Source) { \ PEIGHT_BYTE d = (PEIGHT_BYTE)(Destination); \ PEIGHT_BYTE s = (PEIGHT_BYTE)(Source); \ d->Byte7 = s->Byte0; \ d->Byte6 = s->Byte1; \ d->Byte5 = s->Byte2; \ d->Byte4 = s->Byte3; \ d->Byte3 = s->Byte4; \ d->Byte2 = s->Byte5; \ d->Byte1 = s->Byte6; \ d->Byte0 = s->Byte7; \ } #define REVERSE_BYTES(Destination, Source) { \ PFOUR_BYTE d = (PFOUR_BYTE)(Destination); \ PFOUR_BYTE s = (PFOUR_BYTE)(Source); \ d->Byte3 = s->Byte0; \ d->Byte2 = s->Byte1; \ d->Byte1 = s->Byte2; \ d->Byte0 = s->Byte3; \ } #define REVERSE_BYTES_SHORT(Destination, Source) { \ PTWO_BYTE d = (PTWO_BYTE)(Destination); \ PTWO_BYTE s = (PTWO_BYTE)(Source); \ d->Byte1 = s->Byte0; \ d->Byte0 = s->Byte1; \ } // // Byte reversing macro for converting // USHORTS from big to little endian in place // #define REVERSE_SHORT(Short) { \ UCHAR tmp; \ PTWO_BYTE w = (PTWO_BYTE)(Short); \ tmp = w->Byte0; \ w->Byte0 = w->Byte1; \ w->Byte1 = tmp; \ } // // Byte reversing macro for convering // ULONGS between big & little endian in place // #define REVERSE_LONG(Long) { \ UCHAR tmp; \ PFOUR_BYTE l = (PFOUR_BYTE)(Long); \ tmp = l->Byte3; \ l->Byte3 = l->Byte0; \ l->Byte0 = tmp; \ tmp = l->Byte2; \ l->Byte2 = l->Byte1; \ l->Byte1 = tmp; \ } // // This macro has the effect of Bit = log2(Data) // #define WHICH_BIT(Data, Bit) { \ UCHAR tmp; \ for (tmp = 0; tmp < 32; tmp++) { \ if (((Data) >> tmp) == 1) { \ break; \ } \ } \ ASSERT(tmp != 32); \ (Bit) = tmp; \ } // // Include SCSIPORT definitions for backwards compatability. // #if defined (STOR_USE_SCSI_ALIASES) #define ScsiPortInitialize StorPortInitialize #define ScsiPortFreeDeviceBase StorPortFreeDeviceBase #define ScsiPortGetBusData StorPortGetBusData #define ScsiPortSetBusDataByOffset StorPortSetBusDataByOffset #define ScsiPortGetDeviceBase StorPortGetDeviceBase #define ScsiPortGetLogicalUnit StorPortGetLogicalUnit #define ScsiPortGetSrb StorPortGetSrb #define ScsiPortGetPhysicalAddress StorPortGetPhysicalAddress #define ScsiPortGetVirtualAddress StorPortGetVirtualAddress #define ScsiPortGetUncachedExtension StorPortGetUncachedExtension #define ScsiPortFlushDma StorPortFlushDma #define ScsiPortIoMapTransfer StorPortIoMapTransfer #define ScsiPortNotification StorPortNotification #define ScsiPortLogError StorPortLogError #define ScsiPortCompleteRequest StorPortCompleteRequest #define ScsiPortMoveMemory StorPortMoveMemory #define ScsiPortReadPortUchar(Port) StorPortReadPortUchar(NULL, Port) #define ScsiPortReadPortUshort(Port) StorPortReadPortUshort(NULL, Port) #define ScsiPortReadPortUlong(Port) StorPortReadPortUlong(NULL, Port) #define ScsiPortReadPortBufferUchar(Port, Buffer, Count) StorPortReadPortBufferUchar(NULL, Port, Buffer, Count) #define ScsiPortReadPortBufferUshort(Port, Buffer, Count) StorPortReadPortBufferUshort(NULL, Port, Buffer, Count) #define ScsiPortReadPortBufferUlong(Port, Buffer, Count) StorPortReadPortBufferUlong(NULL, Port, Buffer, Count) #define ScsiPortReadRegisterUchar(Register) StorPortReadRegisterUchar(NULL, Register) #define ScsiPortReadRegisterUshort(Register) StorPortReadRegisterUshort(NULL, Register) #define ScsiPortReadRegisterUlong(Register) StorPortReadRegisterUlong(NULL, Register) #define ScsiPortReadRegisterBufferUchar(Register, Buffer, Count) StorPortReadRegisterBufferUchar(NULL, Register, Buffer, Count) #define ScsiPortReadRegisterBufferUshort(Register, Buffer, Count) StorPortReadRegisterBufferUshort(NULL, Register, Buffer, Count) #define ScsiPortReadRegisterBufferUlong(Register, Buffer, Count) StorPortReadRegisterBufferUlong(NULL, Register, Buffer, Count) #define ScsiPortStallExecution StorPortStallExecution #define ScsiPortWritePortUchar(Port, Value) StorPortWritePortUchar(NULL, Port, Value) #define ScsiPortWritePortUshort(Port, Value) StorPortWritePortUshort(NULL, Port, Value) #define ScsiPortWritePortUlong(Port, Value) StorPortWritePortUlong(NULL, Port, Value) #define ScsiPortWritePortBufferUchar(Port, Buffer, Count) StorPortWritePortBufferUchar(NULL, Port, Buffer, Count) #define ScsiPortWritePortBufferUshort(Port, Buffer, Count) StorPortWritePortBufferUshort(NULL, Port, Buffer, Count) #define ScsiPortWritePortBufferUlong(Port, Buffer, Count) StorPortWritePortBufferUlong(NULL, Port, Buffer, Count) #define ScsiPortWriteRegisterUchar(Register, Value) StorPortWriteRegisterUchar(NULL, Register, Value) #define ScsiPortWriteRegisterUshort(Register, Value) StorPortWriteRegisterUshort(NULL, Register, Value) #define ScsiPortWriteRegisterUlong(Register, Value) StorPortWriteRegisterUlong(NULL, Register, Value) #define ScsiPortWriteRegisterBufferUchar(Register, Buffer, Count) StorPortWriteRegisterBufferUchar(NULL, Register, Buffer, Count) #define ScsiPortWriteRegisterBufferUshort(Register, Buffer, Count) StorPortWriteRegisterBufferUshort(NULL, Register, Buffer, Count) #define ScsiPortWriteRegisterBufferUlong(Register, Buffer, Count) StorPortWriteRegisterBufferUlong(NULL, Register, Buffer, Count) #define ScsiPortConvertUlongToPhysicalAddress StorPortConvertUlongToPhysicalAddress #define ScsiPortConvertPhysicalAddressToUlong StorPortConvertPhysicalAddressToUlong #define ScsiPortQuerySystemTime StorPortQuerySystemTime #define ScsiPortValidateRange StorPortValidateRange #define ScsiDebugPrint StorPortDebugPrint typedef PHYSICAL_ADDRESS SCSI_PHYSICAL_ADDRESS, *PSCSI_PHYSICAL_ADDRESS; #endif // STOR_USE_SCSI_ALIASES #if _MSC_VER >= 1200 #pragma warning(pop) // un-sets any local warning changes #else #pragma warning(default:4200) // array[0] is not a warning for this file #endif #endif // !defined _NTSTORPORT_