You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
87 lines
16 KiB
87 lines
16 KiB
// Copyright (c) 1997-2003 Microsoft Corporation, All Rights Reserved
|
|
// MOF Generated for module "SOURCE-ROUTING-MIB" by smi2smir version 1.10.635.0000
|
|
qualifier write:ToInstance ToSubClass;
|
|
qualifier read:ToInstance ToSubClass;
|
|
qualifier provider:ToInstance ToSubClass;
|
|
qualifier singleton:ToInstance ToSubClass;
|
|
qualifier dynamic:ToInstance ToSubClass;
|
|
qualifier textual_convention:ToInstance ToSubClass;
|
|
qualifier object_identifier:ToInstance ToSubClass;
|
|
qualifier encoding:ToInstance ToSubClass;
|
|
qualifier object_syntax:ToInstance ToSubClass;
|
|
qualifier status:ToInstance ToSubClass;
|
|
qualifier fixed_length:ToInstance ToSubClass;
|
|
qualifier variable_length:ToInstance ToSubClass;
|
|
qualifier variable_value:ToInstance ToSubClass;
|
|
qualifier bits:ToInstance ToSubClass;
|
|
qualifier key_order:ToInstance ToSubClass;
|
|
qualifier enumeration:ToInstance ToSubClass;
|
|
qualifier bits:ToInstance ToSubClass;
|
|
qualifier description:ToInstance ToSubClass;
|
|
qualifier display_hint:ToInstance ToSubClass;
|
|
qualifier defval:ToInstance ToSubClass;
|
|
qualifier units:ToInstance ToSubClass;
|
|
qualifier reference:ToInstance ToSubClass;
|
|
qualifier virtual_key:ToInstance ToSubClass;
|
|
qualifier rowstatus:ToInstance ToSubClass;
|
|
qualifier module_name:ToInstance ToSubClass;
|
|
qualifier module_imports:ToInstance ToSubClass;
|
|
qualifier group_objectid:ToInstance ToSubClass;
|
|
|
|
[abstract]
|
|
class SnmpMacro
|
|
{
|
|
};
|
|
|
|
[abstract]
|
|
class SnmpObjectType:SnmpMacro
|
|
{
|
|
};
|
|
|
|
class SnmpNotifyStatus:__ExtendedStatus
|
|
{
|
|
[write] sint32 SnmpStatusCode;
|
|
[write] string Description;
|
|
};
|
|
|
|
[description(""), module_name("SOURCE-ROUTING-MIB"), singleton, group_objectid("1.3.6.1.2.1.17.10"), dynamic, provider("MS_SNMP_INSTANCE_PROVIDER")]
|
|
class SNMP_SOURCE_ROUTING_MIB_dot1dPortPair : SnmpObjectType
|
|
{
|
|
[textual_convention("Gauge"), encoding("Gauge"), object_syntax("Gauge"), object_identifier("1.3.6.1.2.1.17.10.1"), read, description("The total number of entries in the Bridge Port\n Pair Database."), status("mandatory")] uint32 dot1dPortPairTableSize;
|
|
};
|
|
[description("A table that contains information about every\n\n\n\n\n\n port pair database entity associated with this\n source routing bridge.\nA list of information for each port pair entity\n of a bridge."), module_name("SOURCE-ROUTING-MIB"), group_objectid("1.3.6.1.2.1.17.10"), dynamic, provider("MS_SNMP_INSTANCE_PROVIDER")]
|
|
class SNMP_SOURCE_ROUTING_MIB_dot1dPortPairTable : SnmpObjectType
|
|
{
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), variable_value("1..65535"), object_identifier("1.3.6.1.2.1.17.10.2.1.1"), read, write, description("The port number of the lower numbered port for\n which this entry contains port pair database\n information."), status("mandatory"), key, key_order(1)] sint32 dot1dPortPairLowPort;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), variable_value("1..65535"), object_identifier("1.3.6.1.2.1.17.10.2.1.2"), read, write, description("The port number of the higher numbered port for\n which this entry contains port pair database\n information."), status("mandatory"), key, key_order(2)] sint32 dot1dPortPairHighPort;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), object_identifier("1.3.6.1.2.1.17.10.2.1.3"), read, write, description("A bridge number that uniquely identifies the path\n provided by this source routing bridge between the\n segments connected to dot1dPortPairLowPort and\n dot1dPortPairHighPort. The purpose of bridge\n number is to disambiguate between multiple paths\n connecting the same two LANs."), status("mandatory")] sint32 dot1dPortPairBridgeNum;
|
|
[textual_convention("EnumeratedINTEGER"), enumeration("enabled(1),disabled(2),invalid(3)"), encoding("INTEGER"), object_syntax("EnumeratedINTEGER"), object_identifier("1.3.6.1.2.1.17.10.2.1.4"), read, write, description("The state of dot1dPortPairBridgeNum. Writing\n 'invalid(3)' to this object removes the\n corresponding entry."), status("mandatory")] string dot1dPortPairBridgeState;
|
|
};
|
|
[description(""), module_name("SOURCE-ROUTING-MIB"), singleton, group_objectid("1.3.6.1.2.1.17.3"), dynamic, provider("MS_SNMP_INSTANCE_PROVIDER")]
|
|
class SNMP_SOURCE_ROUTING_MIB_dot1dSr : SnmpObjectType
|
|
{
|
|
[textual_convention("EnumeratedINTEGER"), enumeration("mode3(1),mode6(2)"), encoding("INTEGER"), object_syntax("EnumeratedINTEGER"), object_identifier("1.3.6.1.2.1.17.3.2"), read, write, description("Indicates whether the bridge operates using older\n 3 bit length negotiation fields or the newer 6 bit\n length field in its RIF."), status("mandatory")] string dot1dSrBridgeLfMode;
|
|
};
|
|
[description("A table that contains information about every\n port that is associated with this source route\n bridge.\nA list of information for each port of a source\n route bridge."), module_name("SOURCE-ROUTING-MIB"), group_objectid("1.3.6.1.2.1.17.3"), dynamic, provider("MS_SNMP_INSTANCE_PROVIDER")]
|
|
class SNMP_SOURCE_ROUTING_MIB_dot1dSrPortTable : SnmpObjectType
|
|
{
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.17"), read, description("The number of duplicate LAN IDs or Tree errors.\n This helps in detection of problems in networks\n containing older IBM Source Routing Bridges."), status("mandatory")] uint32 dot1dSrPortDupLanIdOrTreeErrors;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), variable_value("1..65535"), object_identifier("1.3.6.1.2.1.17.3.1.1.1"), read, description("The port number of the port for which this entry\n\n\n\n\n\n contains Source Route management information."), status("mandatory"), key, key_order(1)] sint32 dot1dSrPort;
|
|
[textual_convention("EnumeratedINTEGER"), enumeration("auto-span(1),disabled(2),forced(3)"), encoding("INTEGER"), object_syntax("EnumeratedINTEGER"), object_identifier("1.3.6.1.2.1.17.3.1.1.7"), read, write, description("Determines how this port behaves when presented\n with a Spanning Tree Explorer frame. The value\n 'disabled(2)' indicates that the port will not\n accept or send Spanning Tree Explorer packets; any\n STE packets received will be silently discarded.\n The value 'forced(3)' indicates the port will\n always accept and propagate Spanning Tree Explorer\n frames. This allows a manually configured\n Spanning Tree for this class of packet to be\n configured. Note that unlike transparent\n bridging, this is not catastrophic to the network\n if there are loops. The value 'auto-span(1)' can\n only be returned by a bridge that both implements\n the Spanning Tree Protocol and has use of the\n protocol enabled on this port. The behavior of the\n port for Spanning Tree Explorer frames is\n determined by the state of dot1dStpPortState. If\n the port is in the 'forwarding' state, the frame\n will be accepted or propagated. Otherwise, it\n will be silently discarded."), status("mandatory")] string dot1dSrPortSTESpanMode;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.10"), read, description("The number of All Paths Explorer frames, also\n referred to as All Routes Explorer frames, that\n have been received by this port from its segment."), status("mandatory")] uint32 dot1dSrPortApeInFrames;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.12"), read, description("The number of spanning tree explorer frames that\n have been received by this port from its segment."), status("mandatory")] uint32 dot1dSrPortSteInFrames;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.8"), read, description("The number of Specifically Routed frames, also\n referred to as Source Routed Frames, that have\n been received from this port's segment."), status("mandatory")] uint32 dot1dSrPortSpecInFrames;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.11"), read, description("The number of all Paths Explorer Frames, also\n referred to as All Routes Explorer frames, that\n have been transmitted by this port on its\n segment."), status("mandatory")] uint32 dot1dSrPortApeOutFrames;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), object_identifier("1.3.6.1.2.1.17.3.1.1.6"), read, write, description("The maximum size of the INFO field (LLC and\n above) that this port can send/receive. It does\n not include any MAC level (framing) octets. The\n value of this object is used by this bridge to\n determine whether a modification of the\n LargestFrame (LF, see [14]) field of the Routing\n Control field of the Routing Information Field is\n necessary.\n\n 64 valid values are defined by the IEEE 802.5M SRT\n Addendum: 516, 635, 754, 873, 993, 1112, 1231,\n 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906,\n 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812,\n 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197,\n 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587,\n 10997, 11407, 12199, 12992, 13785, 14578, 15370,\n 16163, 16956, 17749, 20730, 23711, 26693, 29674,\n 32655, 35637, 38618, 41600, 44591, 47583, 50575,\n 53567, 56559, 59551, and 65535.\n\n An illegal value will not be accepted by the\n bridge."), status("mandatory")] sint32 dot1dSrPortLargestFrame;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), object_identifier("1.3.6.1.2.1.17.3.1.1.3"), read, write, description("The segment number that uniquely identifies the\n segment to which this port is connected. Current\n source routing protocols limit this value to the\n range: 0 through 4095. (The value 0 is used by\n some management applications for special test\n cases.) A value of 65535 signifies that no segment\n number is assigned to this port."), status("mandatory")] sint32 dot1dSrPortLocalSegment;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.13"), read, description("The number of spanning tree explorer frames that\n have been transmitted by this port on its\n segment."), status("mandatory")] uint32 dot1dSrPortSteOutFrames;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.9"), read, description("The number of Specifically Routed frames, also\n referred to as Source Routed Frames, that this\n port has transmitted on its segment."), status("mandatory")] uint32 dot1dSrPortSpecOutFrames;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), object_identifier("1.3.6.1.2.1.17.3.1.1.5"), read, write, description("The segment number that corresponds to the target\n segment this port is considered to be connected to\n by the bridge. Current source routing protocols\n limit this value to the range: 0 through 4095.\n\n\n\n\n\n (The value 0 is used by some management\n applications for special test cases.) A value of\n 65535 signifies that no target segment is assigned\n to this port."), status("mandatory")] sint32 dot1dSrPortTargetSegment;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.14"), read, description("The number of explorer frames that have been\n discarded by this port because the routing\n descriptor field contained an invalid adjacent\n segment value."), status("mandatory")] uint32 dot1dSrPortSegmentMismatchDiscards;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.16"), read, description("The number of explorer frames that have been\n discarded by this port because the Routing\n Information Field has exceeded the maximum route\n descriptor length."), status("mandatory")] uint32 dot1dSrPortHopCountExceededDiscards;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.15"), read, description("The number of frames that have been discarded by\n this port because the routing descriptor field\n contained a duplicate segment identifier."), status("mandatory")] uint32 dot1dSrPortDuplicateSegmentDiscards;
|
|
[textual_convention("Counter"), encoding("Counter"), object_syntax("Counter"), object_identifier("1.3.6.1.2.1.17.3.1.1.18"), read, description("The number of ARE and STE frames that were\n discarded because the last LAN ID in the routing\n information field did not equal the LAN-in ID.\n This error can occur in implementations which do\n only a LAN-in ID and Bridge Number check instead\n of a LAN-in ID, Bridge Number, and LAN-out ID\n check before they forward broadcast frames."), status("mandatory")] uint32 dot1dSrPortLanIdMismatches;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), object_identifier("1.3.6.1.2.1.17.3.1.1.2"), read, write, description("The maximum number of routing descriptors allowed\n in an All Paths or Spanning Tree Explorer frames."), status("mandatory")] sint32 dot1dSrPortHopCount;
|
|
[textual_convention("INTEGER"), encoding("INTEGER"), object_syntax("INTEGER"), object_identifier("1.3.6.1.2.1.17.3.1.1.4"), read, write, description("A bridge number uniquely identifies a bridge when\n more than one bridge is used to span the same two\n segments. Current source routing protocols limit\n this value to the range: 0 through 15. A value of\n 65535 signifies that no bridge number is assigned\n to this bridge."), status("mandatory")] sint32 dot1dSrPortBridgeNum;
|
|
};
|
|
|