You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
205 lines
7.2 KiB
205 lines
7.2 KiB
//
|
|
// Diagnostic loader messages.
|
|
//
|
|
//
|
|
// Defines for Class, Detail and Action are used to lookup
|
|
// text from DiagLoadClass, DiagLoadDetail and DiagLoadAction
|
|
// respectively. One must change LOAD_CL_END, DIAG_BL_END
|
|
// and LOAD_ACT_END to reflect any change in the content of
|
|
// the tables. They are used for bounds checking to avoid
|
|
// access violations.
|
|
|
|
//
|
|
// Class Definitions
|
|
//
|
|
|
|
#define LOAD_SW_INT_ERR_CLASS 0x00000000L
|
|
#define LOAD_SW_MISRQD_FILE_CLASS 0x00000001L
|
|
#define LOAD_SW_BAD_FILE_CLASS 0x00000002L
|
|
#define LOAD_SW_MIS_FILE_CLASS 0x00000003L
|
|
#define LOAD_HW_MEM_CLASS 0x00000004L
|
|
#define LOAD_HW_DISK_CLASS 0x00000005L
|
|
#define LOAD_HW_GEN_ERR_CLASS 0x00000006L
|
|
#define LOAD_HW_FW_CFG_CLASS 0x00000007L
|
|
#define LAOD_SW_MISMATCHED_KERNEL 0x00000008L
|
|
#define LOAD_CL_END 0x00000009L
|
|
|
|
|
|
//
|
|
// Class Declarations
|
|
//
|
|
|
|
static PCHAR DiagLoadClass[] = {
|
|
|
|
"Windows 2000 could not start because of an error in the software.\r\nPlease report this problem as :\r\n\0",
|
|
"Windows 2000 could not start because the following file was not found\r\nand is required :\r\n\0",
|
|
"Windows 2000 could not start because of a bad copy of the following file :\r\n\0",
|
|
"Windows 2000 could not start because the following file is missing or corrupt:\r\n\0",
|
|
"Windows 2000 could not start because of a hardware memory configuration\r\nproblem.\r\n\0",
|
|
"Windows 2000 could not start because of a computer disk hardware\r\nconfiguration problem.\r\n\0",
|
|
"Windows 2000 could not start because of a general computer hardware\r\nconfiguration problem.\r\n\0",
|
|
"Windows 2000 could not start because of the following ARC firmware\r\nboot configuration problem :\r\n\0",
|
|
"Windows 2000 could not start because the specified kernel does not exist or\r\nis not compatible with this processor.\r\n\0"
|
|
};
|
|
|
|
//
|
|
// Detail Definitions
|
|
//
|
|
|
|
#define DIAG_BL_MEMORY_INIT 0L
|
|
#define DIAG_BL_CONFIG_INIT 1L
|
|
#define DIAG_BL_IO_INIT 2L
|
|
#define DIAG_BL_FW_GET_BOOT_DEVICE 3L
|
|
#define DIAG_BL_OPEN_BOOT_DEVICE 4L
|
|
#define DIAG_BL_FW_GET_SYSTEM_DEVICE 5L
|
|
#define DIAG_BL_FW_OPEN_SYSTEM_DEVICE 6L
|
|
#define DIAG_BL_GET_SYSTEM_PATH 7L
|
|
#define DIAG_BL_LOAD_SYSTEM_IMAGE 8L
|
|
#define DIAG_BL_FIND_HAL_IMAGE 9L
|
|
#define DIAG_BL_LOAD_HAL_IMAGE 10L
|
|
#define DIAG_BL_LOAD_SYSTEM_IMAGE_DATA 11L
|
|
#define DIAG_BL_LOAD_HAL_IMAGE_DATA 12L
|
|
#define DIAG_BL_LOAD_SYSTEM_DLLS 13L
|
|
#define DIAG_BL_LOAD_HAL_DLLS 14L
|
|
#define DIAG_BL_READ_SYSTEM_REGISTRY 15L
|
|
#define DIAG_BL_LOAD_SYSTEM_REGISTRY 16L
|
|
#define DIAG_BL_FIND_SYSTEM_DRIVERS 17L
|
|
#define DIAG_BL_READ_SYSTEM_DRIVERS 18L
|
|
#define DIAG_BL_LOAD_DEVICE_DRIVER 19L
|
|
#define DIAG_BL_LOAD_SYSTEM_HIVE 20L
|
|
#define DIAG_BL_SYSTEM_PART_DEV_NAME 21L
|
|
#define DIAG_BL_BOOT_PART_DEV_NAME 22L
|
|
#define DIAG_BL_ARC_BOOT_DEV_NAME 23L
|
|
#define DIAG_BL_ARC_HAL_NAME 24L
|
|
#define DIAG_BL_SETUP_FOR_NT 25L
|
|
#define DIAG_BL_KERNEL_INIT_XFER 26L
|
|
#define DIAG_BL_END 27L
|
|
|
|
//
|
|
// Detail Declarations
|
|
//
|
|
|
|
static PCHAR DiagLoadDetail[] = {
|
|
|
|
// DIAG_BL_MEMORY_INIT 0L
|
|
"Check hardware memory configuration and amount of RAM.\r\n\0",
|
|
|
|
// DIAG_BL_CONFIG_INIT 1L
|
|
"Too many configuration entries.\r\n\0",
|
|
|
|
// DIAG_BL_IO_INIT 2L
|
|
"Could not access disk partition tables \r\n\0",
|
|
|
|
// DIAG_BL_FW_GET_BOOT_DEVICE 3L
|
|
"The 'osloadpartition' parameter setting is invalid.\r\n\0",
|
|
|
|
// DIAG_BL_OPEN_BOOT_DEVICE 4L
|
|
"Could not read from the selected boot disk. Check boot path\r\nand disk hardware.\r\n\0",
|
|
|
|
// DIAG_BL_FW_GET_SYSTEM_DEVICE 5L
|
|
"The 'systempartition' parameter setting is invalid.\r\n\0",
|
|
|
|
// DIAG_BL_FW_OPEN_SYSTEM_DEVICE 6L
|
|
"Could not read from the selected system boot disk.\r\nCheck 'systempartition' path.\r\n\0",
|
|
|
|
// DIAG_BL_GET_SYSTEM_PATH 7L
|
|
"The 'osloadfilename' parameter does not point to a valid file.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_SYSTEM_IMAGE 8L
|
|
"<windows 2000 root>\\system32\\ntoskrnl.exe.\r\n\0",
|
|
|
|
// DIAG_BL_FIND_HAL_IMAGE 9L
|
|
"The 'osloader' parameter does not point to a valid file.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_HAL_IMAGE 10L
|
|
#if defined(i386)
|
|
"<windows 2000 root>\\system32\\hal.dll.\r\n\0",
|
|
#endif
|
|
|
|
#if defined(MIPS)
|
|
"'osloader'\\hal.dll\r\n\0",
|
|
#endif
|
|
|
|
// DIAG_BL_LOAD_SYSTEM_IMAGE_DATA 11L
|
|
"Loader error 1.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_HAL_IMAGE_DATA 12L
|
|
"Loader error 2.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_SYSTEM_DLLS 13L
|
|
"load needed DLLs for kernel.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_HAL_DLLS 14L
|
|
"load needed DLLs for HAL.\r\n\0",
|
|
|
|
// DIAG_BL_READ_SYSTEM_REGISTRY 15L
|
|
"<windows 2000 root>\\system32\\config\\system. \r\n\0",
|
|
|
|
// DIAG_BL_LOAD_SYSTEM_REGISTRY 16L
|
|
"<windows 2000 root>\\system32\\config\\system. \r\n\0",
|
|
|
|
// DIAG_BL_FIND_SYSTEM_DRIVERS 17L
|
|
"find system drivers.\r\n\0",
|
|
|
|
// DIAG_BL_READ_SYSTEM_DRIVERS 18L
|
|
"read system drivers.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_DEVICE_DRIVER 19L
|
|
"did not load system boot device driver.\r\n\0",
|
|
|
|
// DIAG_BL_LOAD_SYSTEM_HIVE 20L
|
|
"load system hardware configuration file.\r\n\0",
|
|
|
|
// DIAG_BL_SYSTEM_PART_DEV_NAME 21L
|
|
"find system partition name device name.\r\n\0",
|
|
|
|
// DIAG_BL_BOOT_PART_DEV_NAME 22L
|
|
"find boot partition name.\r\n\0",
|
|
|
|
// DIAG_BL_ARC_BOOT_DEV_NAME 23L
|
|
"did not properly generate ARC name for HAL and system paths.\r\n\0",
|
|
|
|
// DIAG_BL_ARC_HAL_NAME 24L
|
|
"did not properly generate ARC name for HAL and system paths.\r\n\0",
|
|
|
|
// DIAG_BL_SETUP_FOR_NT 25L
|
|
"Loader error 3.\r\n\0",
|
|
|
|
// DIAG_BL_KERNEL_INIT_XFER 26L
|
|
"<windows 2000 root>\\system32\\ntoskrnl.exe\r\n\0"
|
|
|
|
};
|
|
|
|
|
|
//
|
|
// Action Definitions
|
|
//
|
|
|
|
#define LOAD_SW_INT_ERR_ACT 0x00000000L
|
|
#define LOAD_SW_FILE_REST_ACT 0x00000001L
|
|
#define LOAD_SW_FILE_REINST_ACT 0x00000002L
|
|
#define LOAD_HW_MEM_ACT 0x00000003L
|
|
#define LOAD_HW_DISK_ACT 0x00000004L
|
|
#define LOAD_HW_GEN_ACT 0x00000005L
|
|
#define LOAD_HW_FW_CFG_ACT 0x00000006L
|
|
#define LOAD_ACT_END 0x00000007L
|
|
|
|
|
|
//
|
|
// Action Declarations
|
|
//
|
|
|
|
static PCHAR DiagLoadAction[] = {
|
|
|
|
"Please contact your support person to report this problem.\r\n\0",
|
|
"You can attempt to repair this file by starting Windows 2000\r\n"
|
|
"Setup using the original Setup floppy disk or CD-ROM.\r\n"
|
|
"Select 'r' at the first screen to start repair.\r\n\0",
|
|
"Please re-install a copy of the above file.\r\n\0",
|
|
"Please check the Windows 2000(TM) documentation about hardware\r\nmemory requirements and your hardware reference manuals for\r\nadditional information.\r\n\0",
|
|
"Please check the Windows 2000(TM) documentation about hardware\r\ndisk configuration and your hardware reference manuals for\r\nadditional information.\r\n\0",
|
|
"Please check the Windows 2000(TM) documentation about hardware\r\nconfiguration and your hardware reference manuals for additional\r\ninformation.\r\n\0",
|
|
"Please check the Windows 2000(TM) documentation about ARC configuration\r\noptions and your hardware reference manuals for additional\r\ninformation.\r\n\0"
|
|
};
|
|
|
|
|