windows-server-2003/base/busdrv/pccard/pcmcibus/cl.c

/*++

Copyright (c) 1994 Microsoft Corporation

Module Name:

    cl.c

Abstract:

    This module contains the code that contains
    Cirrus Logic controller specific initialization and
    other dispatches

Author:

    Ravisankar Pudipeddi (ravisp) 1-Nov-97


Environment:

    Kernel mode

Revision History :

    Neil Sandlin (neilsa) 3-Mar-99
       new setpower routine interface

--*/

#include "pch.h"


VOID
CLInitialize(IN PFDO_EXTENSION FdoExtension)
/*++

Routine Description:

    Initialize Cirrus Logic cardbus controllers

Arguments:

    FdoExtension - Pointer to the device extension for the controller FDO

Return Value:

    None
--*/
{
    UCHAR                   byte, revisionID;
    USHORT                  word;


    byte = PcicReadSocket(FdoExtension->SocketList,
                                 PCIC_CL_MISC_CTRL3);

    if ((FdoExtension->ControllerType == PcmciaCLPD6832) &&
        ((byte & CL_MC3_INTMODE_MASK) == CL_MC3_INTMODE_EXTHW)) {

        FdoExtension->LegacyIrqMask = 0xd8b8;     //3,4,5,7,11,12,14,15

    }

    GetPciConfigSpace(FdoExtension, CFGSPACE_REV_ID, &revisionID, 1);
    if (FdoExtension->ControllerType == PcmciaCLPD6832) {
        //disable CSC IRQ routing (use PCI interrupt for CSC)
        GetPciConfigSpace(FdoExtension, CFGSPACE_BRIDGE_CTRL, &word, 2);
        word &= ~BCTRL_CL_CSCIRQROUTING_ENABLE;
        SetPciConfigSpace(FdoExtension, CFGSPACE_BRIDGE_CTRL, &word, 2);
    }
    else {
        //disable CSC IRQ routing (use PCI interrupt for CSC)
        GetPciConfigSpace(FdoExtension, CFGSPACE_CL_CFGMISC1, &byte, 1);
        byte &= ~CL_CFGMISC1_ISACSC;
        SetPciConfigSpace(FdoExtension, CFGSPACE_CL_CFGMISC1, &byte, 1);
    }

    //enable speaker
    byte = PcicReadSocket(FdoExtension->SocketList, PCIC_CL_MISC_CTRL1);
    byte |= CL_MC1_SPKR_ENABLE;
    PcicWriteSocket(FdoExtension->SocketList, PCIC_CL_MISC_CTRL1, byte);

    byte = PcicReadSocket(FdoExtension->SocketList, PCIC_CL_DEV_IMP_C);
    if (byte & (CL_IMPC_ZVP_A | CL_IMPC_ZVP_B)) {
        //enable multimedia support (i.e. ZV)
        byte = PcicReadSocket(FdoExtension->SocketList,PCIC_CL_MISC_CTRL3);
        byte |= CL_MC3_MM_ARM;
        PcicWriteSocket(FdoExtension->SocketList, PCIC_CL_MISC_CTRL3,byte);
    }
}

NTSTATUS
CLSetPower(
    IN PSOCKET SocketPtr,
    IN BOOLEAN Enable,
    OUT PULONG pDelayTime
    )
/*++

Routine Description:

    Set power to the specified socket.

Arguments:

    SocketPtr - the socket to set
    Enable - TRUE means to set power - FALSE is to turn it off.
    pDelayTime - specifies delay (msec) to occur after the current phase

Return Value:

    STATUS_MORE_PROCESSING_REQUIRED - increment phase, perform delay, recall
    other status values terminate sequence

--*/

{
    NTSTATUS status;
    UCHAR               oldPower, newPower, oldMiscCtrl, newMiscCtrl;

    if (IsCardBusCardInSocket(SocketPtr)) {
        //
        // Hand over to generic power setting routine
        //
        return(CBSetPower(SocketPtr, Enable, pDelayTime));

    }

    switch(SocketPtr->PowerPhase) {
    case 1:
        //
        // R2 card - special handling
        //
        oldPower = PcicReadSocket(SocketPtr, PCIC_PWR_RST);
        oldMiscCtrl = PcicReadSocket(SocketPtr, PCIC_CL_MISC_CTRL1);

        //
        // Set new vcc
        //
        newPower = (Enable ? PC_CARDPWR_ENABLE: 0);
        //
        // Since we always set 5V for R2 cards, we let MISC control be 0
        // other wise it should be CL_MC1_VCC_3V if the vcc was 3.3V
        //
        newMiscCtrl = 0;

        //
        // Set vpp
        //
        if (Enable) {
             //
             // We - as always - set vpp to vcc..
             //
             newPower |= PC_VPP_SETTO_VCC;
        }
        //
        // Don't nuke the non-power related bits in the register..
        //
        newPower |= (oldPower & PC_PWRON_BITS);
        newMiscCtrl |= (oldMiscCtrl & ~CL_MC1_VCC_33V);
        //
        // If Vcc is turned off, reset OUTPUT_ENABLE & AUTOPWR_ENABLE
        //
        if (!(newPower & PC_CARDPWR_ENABLE)) {
            newPower &= ~PC_PWRON_BITS;
        }
        //
        // Only set power if nothing's changed..
        //
        status = STATUS_SUCCESS;
        if ((newPower != oldPower) || (newMiscCtrl != oldMiscCtrl)) {
            PcicWriteSocket(SocketPtr, PCIC_PWR_RST, newPower);
            PcicWriteSocket(SocketPtr, PCIC_CL_MISC_CTRL1, newMiscCtrl);
            //
            // Allow ramp up.. (actually we don't need to this if
            // Enable was FALSE).  Keep it for paranoia's sake
            //
            *pDelayTime = PCMCIA_PCIC_STALL_POWER;
            SocketPtr->PowerData = (ULONG) newPower;
            status = STATUS_MORE_PROCESSING_REQUIRED;
        }
        break;

    case 2:

        newPower = (UCHAR) SocketPtr->PowerData;

        if ((newPower & PC_CARDPWR_ENABLE) &&
             ((newPower & PC_PWRON_BITS) != PC_PWRON_BITS)) {
            //
            // More paranoia?
            //
            newPower |= PC_PWRON_BITS;
            PcicWriteSocket(SocketPtr, PCIC_PWR_RST, newPower);
        }
        status = STATUS_SUCCESS;
        break;

    default:
        ASSERT(FALSE);
        status = STATUS_UNSUCCESSFUL;
    }
    return status;
}


BOOLEAN
CLSetZV(
    IN PSOCKET Socket,
    IN BOOLEAN Enable
    )
{
    UCHAR bData;

    if (Enable) {

        bData = PcicReadSocket(Socket, PCIC_CL_MISC_CTRL1);
        bData |= CL_MC1_MM_ENABLE;
        bData &= ~CL_MC1_SPKR_ENABLE;
        PcicWriteSocket(Socket, PCIC_CL_MISC_CTRL1, bData);

    } else {

        bData = PcicReadSocket(Socket, PCIC_CL_MISC_CTRL1);
        bData &= ~CL_MC1_MM_ENABLE;
        bData |= CL_MC1_SPKR_ENABLE;
        PcicWriteSocket(Socket, PCIC_CL_MISC_CTRL1, bData);

    }
    return TRUE;
}