Leaked source code of windows server 2003
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
Shaswata Das 5c6fe3db62
Create README.md
4 years ago
..
config commiting as it is 4 years ago
install commiting as it is 4 years ago
src commiting as it is 4 years ago
howworks.txt commiting as it is 4 years ago
readme.txt commiting as it is 4 years ago

readme.txt


****************************************************************************
* Interrupt-Affinity Filter
*
* Author: Chris Prince ([email protected])
* Date: Summer, 1999
****************************************************************************


DESCRIPTION:
============
This Interrupt-Affinity Filter (IntFiltr) allows a user to change the
CPU-affinity of the interrupts in a system.

Using this utility, you can direct any device's interrupts to a specific
processor or set or processors (as opposed to always sending interrupts to
all the CPUs in the system). Note that different devices _can_ have
different interrupt-affinity settings. This utility will work on any
machine, regardless of what processor or interrupt controller or HAL is
used.

Obviously, this tool is only interesting for multi-processor machines.



USAGE:
======
There are 2 things that must be done in order to use IntFiltr. These are:

(1) Install the filter [only needs to be done once per machine]
(2) Configure the filter [whenever you want to change settings]



1. Installing the IntFiltr
--------------------------
To install IntFiltr, complete the following steps:

(a) Copy intfiltr.sys to your %SYSTEMROOT%\system32\drivers directory.
[intfiltr.sys is located in the \Install subdirectory of this package]
(b) Update your registry to include the changes listed in intfiltr.reg
To make these changes, you can just run 'regedit intfiltr.reg'.
[intfiltr.reg is located in the \Install subdirectory of this package]


2. Configuring the IntFiltr
---------------------------
To configure IntFiltr, run intfiltr.exe (located in the \Config
subdirectory of this package).

First, highlight a device in the 'Devices' listbox. Then you can use the
'Add Filter' and 'Remove Filter' buttons to turn interrupt filtering on
and off, respectively, for the selected device. When IntFiltr is
installed on a device, the string "InterruptAffinityFilter" will appear
in the 'Upper Filters' listbox.

You can use the 'Set Mask' button to set the CPU-affinity for the selected
device's interrupts, or you can use the 'Delete Mask' button to remove a
device's CPU-affinity mask from the registry. Beware that if no
CPU-affinity mask exists for a device, installing IntFiltr on a
device will have no useful effect.

The button marked "Don't Restart Device When Making Changes" is intended
for advanced users. You can use this button to change a device's filter
settings without restarting the selected device. Note that while this
button is checked, any change you make will not take effect until the next
time the device is restarted (which will usually not occur until the next
reboot).

IMPORTANT NOTE: Although _all_ the machine's devices will appear in the
'Devices' list, it only makes sense to install IntFiltr on top of devices
that have interrupt resources. To see which devices have interrupt
resources, you can go into Device Manager and select View -> Resources By
Type.