You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1093 lines
36 KiB
1093 lines
36 KiB
/******************************Module*Header*******************************\
|
|
* Module Name: blti32.c
|
|
*
|
|
* Contains the low-level I/O blt functions for the Mach32.
|
|
*
|
|
* Hopefully, if you're basing your display driver on this code, to
|
|
* support all of DrvBitBlt and DrvCopyBits, you'll only have to implement
|
|
* the following routines. You shouldn't have to modify much in
|
|
* 'bitblt.c'. I've tried to make these routines as few, modular, simple,
|
|
* and efficient as I could, while still accelerating as many calls as
|
|
* possible that would be cost-effective in terms of performance wins
|
|
* versus size and effort.
|
|
*
|
|
* Note: In the following, 'relative' coordinates refers to coordinates
|
|
* that haven't yet had the offscreen bitmap (DFB) offset applied.
|
|
* 'Absolute' coordinates have had the offset applied. For example,
|
|
* we may be told to blt to (1, 1) of the bitmap, but the bitmap may
|
|
* be sitting in offscreen memory starting at coordinate (0, 768) --
|
|
* (1, 1) would be the 'relative' start coordinate, and (1, 769)
|
|
* would be the 'absolute' start coordinate'.
|
|
*
|
|
* Copyright (c) 1992-1995 Microsoft Corporation
|
|
*
|
|
\**************************************************************************/
|
|
|
|
#include "precomp.h"
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32FillSolid
|
|
*
|
|
* Fills a list of rectangles with a solid colour.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32FillSolid( // Type FNFILL
|
|
PDEV* ppdev,
|
|
LONG c, // Can't be zero
|
|
RECTL* prcl, // List of rectangles to be filled, in relative
|
|
// coordinates
|
|
ULONG rop4, // rop4
|
|
RBRUSH_COLOR rbc, // Drawing colour is rbc.iSolidColor
|
|
POINTL* pptlBrush) // Not used
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
LONG x;
|
|
|
|
ASSERTDD(c > 0, "Can't handle zero rectangles");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 8);
|
|
|
|
I32_OW(pjIoBase, FRGD_COLOR, rbc.iSolidColor);
|
|
I32_OW(pjIoBase, ALU_FG_FN, gaul32HwMixFromRop2[(rop4 >> 2) & 0xf]);
|
|
I32_OW(pjIoBase, DP_CONFIG, FG_COLOR_SRC_FG | WRITE | DRAW);
|
|
|
|
while (TRUE)
|
|
{
|
|
x = xOffset + prcl->left;
|
|
I32_OW(pjIoBase, CUR_X, x);
|
|
I32_OW(pjIoBase, DEST_X_START, x);
|
|
I32_OW(pjIoBase, DEST_X_END, xOffset + prcl->right);
|
|
I32_OW(pjIoBase, CUR_Y, yOffset + prcl->top);
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yOffset + prcl->bottom);
|
|
|
|
if (--c == 0)
|
|
return;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 5);
|
|
}
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32FillPatMonochrome
|
|
*
|
|
* This routine uses the pattern hardware to draw a monochrome patterned
|
|
* list of rectangles.
|
|
*
|
|
* See Blt_DS_P8x8_ENG_IO_66_D0 and Blt_DS_P8x8_ENG_IO_66_D1.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32FillPatMonochrome( // Type FNFILL
|
|
PDEV* ppdev,
|
|
LONG c, // Can't be zero
|
|
RECTL* prcl, // List of rectangles to be filled, in relative
|
|
// coordinates
|
|
ULONG rop4, // rop4
|
|
RBRUSH_COLOR rbc, // rbc.prb points to brush realization structure
|
|
POINTL* pptlBrush) // Pattern alignment
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
ULONG ulHwForeMix;
|
|
BYTE* pjSrc;
|
|
BYTE* pjDst;
|
|
LONG xPattern;
|
|
LONG yPattern;
|
|
LONG xOld;
|
|
LONG yOld;
|
|
LONG iLeftShift;
|
|
LONG iRightShift;
|
|
LONG i;
|
|
BYTE j;
|
|
LONG xLeft;
|
|
ULONG aulTmp[2];
|
|
WORD* pwPattern;
|
|
|
|
ASSERTDD(ppdev->iAsic == ASIC_68800_6 || ppdev->iAsic == ASIC_68800AX,
|
|
"Wrong ASIC type for monochrome 8x8 patterns");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
|
|
xPattern = (pptlBrush->x + xOffset) & 7;
|
|
yPattern = (pptlBrush->y + yOffset) & 7;
|
|
|
|
// If the alignment isn't correct, we'll have to change it:
|
|
|
|
if ((xPattern != rbc.prb->ptlBrush.x) || (yPattern != rbc.prb->ptlBrush.y))
|
|
{
|
|
// Remember that we've changed the alignment on our cached brush:
|
|
|
|
xOld = rbc.prb->ptlBrush.x;
|
|
yOld = rbc.prb->ptlBrush.y;
|
|
|
|
rbc.prb->ptlBrush.x = xPattern;
|
|
rbc.prb->ptlBrush.y = yPattern;
|
|
|
|
// Now do the alignment:
|
|
|
|
yPattern = (yOld - yPattern);
|
|
iRightShift = (xPattern - xOld) & 7;
|
|
iLeftShift = 8 - iRightShift;
|
|
|
|
pjSrc = (BYTE*) &rbc.prb->aulPattern[0];
|
|
pjDst = (BYTE*) &aulTmp[0];
|
|
|
|
for (i = 0; i < 8; i++)
|
|
{
|
|
j = *(pjSrc + (yPattern++ & 7));
|
|
*pjDst++ = (j << iLeftShift) | (j >> iRightShift);
|
|
}
|
|
|
|
rbc.prb->aulPattern[0] = aulTmp[0];
|
|
rbc.prb->aulPattern[1] = aulTmp[1];
|
|
}
|
|
|
|
ulHwForeMix = gaul32HwMixFromRop2[(rop4 >> 2) & 0xf];
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 16);
|
|
I32_OW(pjIoBase, DP_CONFIG, FG_COLOR_SRC_FG | EXT_MONO_SRC_PATT | DRAW |
|
|
WRITE);
|
|
I32_OW(pjIoBase, ALU_FG_FN, ulHwForeMix);
|
|
I32_OW(pjIoBase, ALU_BG_FN, ((rop4 & 0xff00) == 0xaa00) ? LEAVE_ALONE
|
|
: ulHwForeMix);
|
|
|
|
I32_OW(pjIoBase, FRGD_COLOR, rbc.prb->ulForeColor);
|
|
I32_OW(pjIoBase, BKGD_COLOR, rbc.prb->ulBackColor);
|
|
I32_OW(pjIoBase, PATT_LENGTH, 128);
|
|
I32_OW(pjIoBase, PATT_DATA_INDEX, 16);
|
|
|
|
pwPattern = (WORD*) &rbc.prb->aulPattern[0];
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern));
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern + 1));
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern + 2));
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern + 3));
|
|
|
|
while(TRUE)
|
|
{
|
|
xLeft = xOffset + prcl->left;
|
|
I32_OW(pjIoBase, CUR_X, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_START, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_END, xOffset + prcl->right);
|
|
I32_OW(pjIoBase, CUR_Y, yOffset + prcl->top);
|
|
I32_OW(pjIoBase, DEST_Y_END, yOffset + prcl->bottom);
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 5);
|
|
}
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32FillPatColor
|
|
*
|
|
* This routine uses the pattern hardware to draw a colour patterned list of
|
|
* rectangles.
|
|
*
|
|
* See Blt_DS_PCOL_ENG_IO_F0_D0 and Blt_DS_PCOL_ENG_IO_F0_D1.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32FillPatColor( // Type FNFILL
|
|
PDEV* ppdev,
|
|
LONG c, // Can't be zero
|
|
RECTL* prcl, // List of rectangles to be filled, in relative
|
|
// coordinates
|
|
ULONG rop4, // rop4
|
|
RBRUSH_COLOR rbc, // rbc.prb points to brush realization structure
|
|
POINTL* pptlBrush) // Pattern alignment
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
ULONG ulHwMix;
|
|
LONG xLeft;
|
|
LONG xRight;
|
|
LONG yTop;
|
|
LONG cy;
|
|
LONG cyVenetian;
|
|
LONG cyRoll;
|
|
WORD* pwPattern;
|
|
LONG xPattern;
|
|
LONG yPattern;
|
|
|
|
ASSERTDD(ppdev->iBitmapFormat == BMF_8BPP,
|
|
"Colour patterns work only at 8bpp");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
|
|
ulHwMix = gaul32HwMixFromRop2[(rop4 >> 2) & 0xf];
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 9);
|
|
I32_OW(pjIoBase, ALU_FG_FN, ulHwMix);
|
|
I32_OW(pjIoBase, SRC_Y_DIR, 1);
|
|
I32_OW(pjIoBase, PATT_LENGTH, 7); // 8 pixel wide pattern
|
|
|
|
while (TRUE)
|
|
{
|
|
xLeft = xOffset + prcl->left;
|
|
xRight = xOffset + prcl->right;
|
|
yTop = yOffset + prcl->top;
|
|
cy = prcl->bottom - prcl->top;
|
|
|
|
xPattern = (xLeft - pptlBrush->x - xOffset) & 7;
|
|
yPattern = (yTop - pptlBrush->y - yOffset) & 7;
|
|
|
|
if (ulHwMix == OVERPAINT)
|
|
{
|
|
cyVenetian = min(cy, 8);
|
|
cyRoll = cy - cyVenetian;
|
|
}
|
|
else
|
|
{
|
|
cyVenetian = cy;
|
|
cyRoll = 0;
|
|
}
|
|
|
|
I32_OW(pjIoBase, DP_CONFIG, FG_COLOR_SRC_PATT | DATA_WIDTH | DRAW | WRITE);
|
|
I32_OW(pjIoBase, PATT_INDEX, xPattern);
|
|
I32_OW(pjIoBase, DEST_X_START, xLeft);
|
|
I32_OW(pjIoBase, CUR_X, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_END, xRight);
|
|
I32_OW(pjIoBase, CUR_Y, yTop);
|
|
|
|
do {
|
|
// Each scan of the pattern is eight bytes:
|
|
|
|
pwPattern = (WORD*) ((BYTE*) &rbc.prb->aulPattern[0]
|
|
+ (yPattern << 3));
|
|
yPattern = (yPattern + 1) & 7;
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 6);
|
|
I32_OW(pjIoBase, PATT_DATA_INDEX, 0); // Reset index for download
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern));
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern + 1));
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern + 2));
|
|
I32_OW(pjIoBase, PATT_DATA, *(pwPattern + 3));
|
|
yTop++;
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yTop);
|
|
|
|
} while (--cyVenetian != 0);
|
|
|
|
if (cyRoll != 0)
|
|
{
|
|
// When the ROP is PATCOPY, we can take advantage of the fact
|
|
// that we've just laid down an entire row of the pattern, and
|
|
// can do a 'rolling' screen-to-screen blt to draw the rest:
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 7);
|
|
I32_OW(pjIoBase, DP_CONFIG, FG_COLOR_SRC_BLIT | DATA_WIDTH |
|
|
DRAW | WRITE);
|
|
I32_OW(pjIoBase, M32_SRC_X, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_X_START, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_X_END, xRight);
|
|
I32_OW(pjIoBase, M32_SRC_Y, yTop - 8);
|
|
I32_OW(pjIoBase, CUR_Y, yTop);
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yTop + cyRoll);
|
|
}
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 6);
|
|
}
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32Xfer1bpp
|
|
*
|
|
* This routine colour expands a monochrome bitmap, possibly with different
|
|
* Rop2's for the foreground and background. It will be called in the
|
|
* following cases:
|
|
*
|
|
* 1) To colour-expand the monochrome text buffer for the vFastText routine.
|
|
* 2) To blt a 1bpp source with a simple Rop2 between the source and
|
|
* destination.
|
|
* 3) To blt a true Rop3 when the source is a 1bpp bitmap that expands to
|
|
* white and black, and the pattern is a solid colour.
|
|
* 4) To handle a true Rop4 that works out to be Rop2's between the pattern
|
|
* and destination.
|
|
*
|
|
* Needless to say, making this routine fast can leverage a lot of
|
|
* performance.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32Xfer1bpp( // Type FNXFER
|
|
PDEV* ppdev,
|
|
LONG c, // Count of rectangles, can't be zero
|
|
RECTL* prcl, // List of destination rectangles, in relative
|
|
// coordinates
|
|
ROP4 rop4, // rop4
|
|
SURFOBJ* psoSrc, // Source surface
|
|
POINTL* pptlSrc, // Original unclipped source point
|
|
RECTL* prclDst, // Original unclipped destination rectangle
|
|
XLATEOBJ* pxlo) // Translate that provides colour-expansion information
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
ULONG* pulXlate;
|
|
ULONG ulHwForeMix;
|
|
LONG dx;
|
|
LONG dy;
|
|
LONG lSrcDelta;
|
|
BYTE* pjSrcScan0;
|
|
LONG xLeft;
|
|
LONG xRight;
|
|
LONG yTop;
|
|
LONG cy;
|
|
LONG cx;
|
|
LONG xBias;
|
|
LONG culScan;
|
|
LONG lSrcSkip;
|
|
ULONG* pulSrc;
|
|
LONG i;
|
|
ULONG ulFifo;
|
|
|
|
ASSERTDD(c > 0, "Can't handle zero rectangles");
|
|
ASSERTDD(((rop4 & 0xff00) >> 8) == (rop4 & 0xff),
|
|
"Expect only a rop2");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
ulFifo = 0;
|
|
|
|
ulHwForeMix = gaul32HwMixFromRop2[rop4 & 0xf];
|
|
pulXlate = pxlo->pulXlate;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 12);
|
|
I32_OW(pjIoBase, DP_CONFIG, (WORD)(FG_COLOR_SRC_FG | BG_COLOR_SRC_BG | BIT16 |
|
|
EXT_MONO_SRC_HOST | DRAW | WRITE | LSB_FIRST) );
|
|
I32_OW(pjIoBase, ALU_FG_FN, (WORD) ulHwForeMix );
|
|
I32_OW(pjIoBase, ALU_BG_FN, (WORD) ulHwForeMix );
|
|
I32_OW(pjIoBase, BKGD_COLOR, (WORD) pulXlate[0]);
|
|
I32_OW(pjIoBase, FRGD_COLOR, (WORD) pulXlate[1]);
|
|
|
|
dx = pptlSrc->x - prclDst->left;
|
|
dy = pptlSrc->y - prclDst->top;
|
|
|
|
lSrcDelta = psoSrc->lDelta;
|
|
pjSrcScan0 = psoSrc->pvScan0;
|
|
|
|
|
|
while (TRUE)
|
|
{
|
|
xLeft = prcl->left;
|
|
xRight = prcl->right;
|
|
|
|
// The Mach32 'bit packs' monochrome transfers, but GDI gives
|
|
// us monochrome bitmaps whose scans are always dword aligned.
|
|
// Consequently, we use the Mach32's clip registers to make
|
|
// our transfers a multiple of 32 to match the dword alignment:
|
|
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) (xLeft + xOffset) );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) (xRight + xOffset - 1) );
|
|
|
|
yTop = prcl->top;
|
|
cy = prcl->bottom - yTop;
|
|
|
|
xBias = (xLeft + dx) & 31; // Floor
|
|
xLeft -= xBias;
|
|
cx = (xRight - xLeft + 31) & ~31; // Ceiling
|
|
|
|
I32_OW(pjIoBase, CUR_X, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_START, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_END, (WORD) (xLeft + xOffset + cx) );
|
|
I32_OW(pjIoBase, CUR_Y, (WORD) yTop + yOffset );
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, (WORD) (yTop + yOffset + cy) );
|
|
|
|
pulSrc = (ULONG*) (pjSrcScan0 + (yTop + dy) * lSrcDelta
|
|
+ ((xLeft + dx) >> 3));
|
|
culScan = cx >> 5;
|
|
lSrcSkip = lSrcDelta - (culScan << 2);
|
|
|
|
ASSERTDD(((ULONG_PTR)pulSrc & 3) == 0,"Source should be dword aligned");
|
|
|
|
do {
|
|
i = culScan;
|
|
do {
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
I32_OW(pjIoBase, PIX_TRANS, *((USHORT*) pulSrc) );
|
|
I32_OW(pjIoBase, PIX_TRANS, *((USHORT*) pulSrc + 1) );
|
|
pulSrc++;
|
|
|
|
} while (--i != 0);
|
|
|
|
pulSrc = (ULONG*) ((BYTE*) pulSrc + lSrcSkip);
|
|
|
|
} while (--cy != 0);
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 7);
|
|
}
|
|
|
|
// Don't forget to reset the clip register:
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) 0 );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) M32_MAX_SCISSOR );
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32XferNative
|
|
*
|
|
* Transfers a bitmap that is the same colour depth as the display to
|
|
* the screen via the data transfer register, with no translation.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32XferNative( // Type FNXFER
|
|
PDEV* ppdev,
|
|
LONG c, // Count of rectangles, can't be zero
|
|
RECTL* prcl, // Array of relative coordinates destination rectangles
|
|
ULONG rop4, // rop4
|
|
SURFOBJ* psoSrc, // Source surface
|
|
POINTL* pptlSrc, // Original unclipped source point
|
|
RECTL* prclDst, // Original unclipped destination rectangle
|
|
XLATEOBJ* pxlo) // Not used
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
ULONG ulHwForeMix;
|
|
LONG dx;
|
|
LONG dy;
|
|
LONG lSrcDelta;
|
|
BYTE* pjSrcScan0;
|
|
LONG xLeft;
|
|
LONG xRight;
|
|
LONG yTop;
|
|
LONG cy;
|
|
LONG cx;
|
|
LONG xBias;
|
|
ULONG* pulSrc;
|
|
ULONG culScan;
|
|
LONG lSrcSkip;
|
|
LONG i;
|
|
ULONG ulFifo;
|
|
|
|
ASSERTDD(c > 0, "Can't handle zero rectangles");
|
|
ASSERTDD(((rop4 & 0xff00) >> 8) == (rop4 & 0xff),
|
|
"Expect only a rop2");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
ulFifo = 0;
|
|
|
|
ulHwForeMix = gaul32HwMixFromRop2[rop4 & 0xf];
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 10);
|
|
I32_OW(pjIoBase, DP_CONFIG, (WORD)(FG_COLOR_SRC_HOST | BIT16 |
|
|
DRAW | WRITE | LSB_FIRST) );
|
|
I32_OW(pjIoBase, ALU_FG_FN, (WORD) ulHwForeMix );
|
|
I32_OW(pjIoBase, ALU_BG_FN, (WORD) ulHwForeMix );
|
|
|
|
dx = pptlSrc->x - prclDst->left;
|
|
dy = pptlSrc->y - prclDst->top;
|
|
|
|
lSrcDelta = psoSrc->lDelta;
|
|
pjSrcScan0 = psoSrc->pvScan0;
|
|
|
|
|
|
while (TRUE)
|
|
{
|
|
xLeft = prcl->left;
|
|
xRight = prcl->right;
|
|
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) (xLeft + xOffset) );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) (xRight + xOffset - 1) );
|
|
|
|
yTop = prcl->top;
|
|
cy = prcl->bottom - yTop;
|
|
|
|
// We compute 'xBias' in order to dword-align the source pointer.
|
|
// This way, we don't have to do unaligned reads of the source,
|
|
// and we're guaranteed not to read even a byte past the end of
|
|
// the bitmap.
|
|
//
|
|
// Note that this bias works at 24bpp, too:
|
|
|
|
xBias = (xLeft + dx) & 3; // Floor
|
|
xLeft -= xBias;
|
|
cx = (xRight - xLeft + 3) & ~3; // Ceiling
|
|
|
|
I32_OW(pjIoBase, CUR_X, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_START, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_END, (WORD) (xLeft + xOffset + cx) );
|
|
I32_OW(pjIoBase, CUR_Y, (WORD) yTop + yOffset );
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, (WORD) (yTop + yOffset + cy) );
|
|
|
|
pulSrc = (ULONG*) (pjSrcScan0 + (yTop + dy) * lSrcDelta
|
|
+ ((xLeft + dx) * ppdev->cjPelSize));
|
|
culScan = (cx * ppdev->cjPelSize) >> 2;
|
|
lSrcSkip = lSrcDelta - (culScan << 2);
|
|
|
|
ASSERTDD(((ULONG_PTR)pulSrc & 3) == 0, "Source should be dword aligned");
|
|
|
|
if (cy && culScan)
|
|
{
|
|
do {
|
|
i = culScan;
|
|
do {
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
I32_OW(pjIoBase, PIX_TRANS, *((USHORT*) pulSrc) );
|
|
I32_OW(pjIoBase, PIX_TRANS, *((USHORT*) pulSrc + 1) );
|
|
pulSrc++;
|
|
|
|
} while (--i != 0);
|
|
|
|
pulSrc = (ULONG*) ((BYTE*) pulSrc + lSrcSkip);
|
|
|
|
} while (--cy != 0);
|
|
}
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 7);
|
|
}
|
|
|
|
// Don't forget to reset the clip register:
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) 0 );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) M32_MAX_SCISSOR );
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32Xfer4bpp
|
|
*
|
|
* Does a 4bpp transfer from a bitmap to the screen.
|
|
*
|
|
* The reason we implement this is that a lot of resources are kept as 4bpp,
|
|
* and used to initialize DFBs, some of which we of course keep off-screen.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32Xfer4bpp( // Type FNXFER
|
|
PDEV* ppdev,
|
|
LONG c, // Count of rectangles, can't be zero
|
|
RECTL* prcl, // List of destination rectangles, in relative
|
|
// coordinates
|
|
ULONG rop4, // Rop4
|
|
SURFOBJ* psoSrc, // Source surface
|
|
POINTL* pptlSrc, // Original unclipped source point
|
|
RECTL* prclDst, // Original unclipped destination rectangle
|
|
XLATEOBJ* pxlo) // Translate that provides colour-expansion information
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
LONG cjPelSize;
|
|
ULONG ulHwForeMix;
|
|
LONG xLeft;
|
|
LONG xRight;
|
|
LONG yTop;
|
|
LONG xBias;
|
|
LONG dx;
|
|
LONG dy;
|
|
LONG cx;
|
|
LONG cy;
|
|
LONG lSrcDelta;
|
|
BYTE* pjSrcScan0;
|
|
BYTE* pjSrc;
|
|
BYTE jSrc;
|
|
ULONG* pulXlate;
|
|
LONG i;
|
|
USHORT uw;
|
|
LONG cjSrc;
|
|
LONG lSrcSkip;
|
|
ULONG ulFifo;
|
|
|
|
ASSERTDD(psoSrc->iBitmapFormat == BMF_4BPP, "Source must be 4bpp");
|
|
ASSERTDD(c > 0, "Can't handle zero rectangles");
|
|
ASSERTDD(ppdev->iBitmapFormat != BMF_24BPP, "Can't handle 24bpp");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
cjPelSize = ppdev->cjPelSize;
|
|
pulXlate = pxlo->pulXlate;
|
|
ulFifo = 0;
|
|
|
|
dx = pptlSrc->x - prclDst->left;
|
|
dy = pptlSrc->y - prclDst->top; // Add to destination to get source
|
|
|
|
lSrcDelta = psoSrc->lDelta;
|
|
pjSrcScan0 = psoSrc->pvScan0;
|
|
|
|
ulHwForeMix = gaul32HwMixFromRop2[rop4 & 0xf];
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 10);
|
|
I32_OW(pjIoBase, DP_CONFIG, (WORD)(FG_COLOR_SRC_HOST | BIT16 |
|
|
DRAW | WRITE | LSB_FIRST) );
|
|
I32_OW(pjIoBase, ALU_FG_FN, (WORD) ulHwForeMix );
|
|
I32_OW(pjIoBase, ALU_BG_FN, (WORD) ulHwForeMix );
|
|
|
|
|
|
while(TRUE)
|
|
{
|
|
xLeft = prcl->left;
|
|
xRight = prcl->right;
|
|
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) (xLeft + xOffset) );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) (xRight + xOffset - 1) );
|
|
|
|
yTop = prcl->top;
|
|
cy = prcl->bottom - yTop;
|
|
|
|
// We compute 'xBias' in order to dword-align the source pointer.
|
|
// This way, we don't have to do unaligned reads of the source,
|
|
// and we're guaranteed not to read even a byte past the end of
|
|
// the bitmap.
|
|
//
|
|
// Note that this bias works at 24bpp, too:
|
|
|
|
xBias = (xLeft + dx) & 3; // Floor
|
|
xLeft -= xBias;
|
|
cx = (xRight - xLeft + 3) & ~3; // Ceiling
|
|
|
|
I32_OW(pjIoBase, CUR_X, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_START, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_END, (WORD) (xLeft + xOffset + cx) );
|
|
I32_OW(pjIoBase, CUR_Y, (WORD) yTop + yOffset );
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, (WORD) (yTop + yOffset + cy) );
|
|
|
|
pjSrc = pjSrcScan0 + (yTop + dy) * lSrcDelta
|
|
+ ((xLeft + dx) >> 1);
|
|
cjSrc = cx >> 1; // Number of source bytes touched
|
|
lSrcSkip = lSrcDelta - cjSrc;
|
|
|
|
if (cjPelSize == 1)
|
|
{
|
|
// This part handles 8bpp output:
|
|
|
|
do {
|
|
i = cjSrc;
|
|
do {
|
|
jSrc = *pjSrc++;
|
|
uw = (USHORT) (pulXlate[jSrc >> 4]);
|
|
uw |= (USHORT) (pulXlate[jSrc & 0xf] << 8);
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 1);
|
|
I32_OW(pjIoBase, PIX_TRANS, uw );
|
|
} while (--i != 0);
|
|
|
|
pjSrc += lSrcSkip;
|
|
} while (--cy != 0);
|
|
}
|
|
else if (cjPelSize == 2)
|
|
{
|
|
// This part handles 16bpp output:
|
|
|
|
do {
|
|
i = cjSrc;
|
|
do {
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
jSrc = *pjSrc++;
|
|
uw = (USHORT) (pulXlate[jSrc >> 4]);
|
|
I32_OW(pjIoBase, PIX_TRANS, uw );
|
|
uw = (USHORT) (pulXlate[jSrc & 0xf]);
|
|
I32_OW(pjIoBase, PIX_TRANS, uw );
|
|
} while (--i != 0);
|
|
|
|
pjSrc += lSrcSkip;
|
|
} while (--cy != 0);
|
|
}
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 7);
|
|
}
|
|
|
|
// Don't forget to reset the clip register:
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) 0 );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) M32_MAX_SCISSOR );
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32Xfer8bpp
|
|
*
|
|
* Does a 8bpp transfer from a bitmap to the screen.
|
|
*
|
|
* The reason we implement this is that a lot of resources are kept as 8bpp,
|
|
* and used to initialize DFBs, some of which we of course keep off-screen.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32Xfer8bpp( // Type FNXFER
|
|
PDEV* ppdev,
|
|
LONG c, // Count of rectangles, can't be zero
|
|
RECTL* prcl, // List of destination rectangles, in relative
|
|
// coordinates
|
|
ULONG rop4, // Rop4
|
|
SURFOBJ* psoSrc, // Source surface
|
|
POINTL* pptlSrc, // Original unclipped source point
|
|
RECTL* prclDst, // Original unclipped destination rectangle
|
|
XLATEOBJ* pxlo) // Translate that provides colour-expansion information
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
LONG cjPelSize;
|
|
ULONG ulHwForeMix;
|
|
LONG xLeft;
|
|
LONG xRight;
|
|
LONG yTop;
|
|
LONG xBias;
|
|
LONG dx;
|
|
LONG dy;
|
|
LONG cx;
|
|
LONG cy;
|
|
LONG lSrcDelta;
|
|
BYTE* pjSrcScan0;
|
|
BYTE* pjSrc;
|
|
ULONG* pulXlate;
|
|
LONG i;
|
|
USHORT uw;
|
|
LONG cwSrc;
|
|
LONG cxRem;
|
|
LONG lSrcSkip;
|
|
ULONG ulFifo;
|
|
|
|
ASSERTDD(psoSrc->iBitmapFormat == BMF_8BPP, "Source must be 8bpp");
|
|
ASSERTDD(c > 0, "Can't handle zero rectangles");
|
|
ASSERTDD(ppdev->iBitmapFormat != BMF_24BPP, "Can't handle 24bpp");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
cjPelSize = ppdev->cjPelSize;
|
|
pulXlate = pxlo->pulXlate;
|
|
ulFifo = 0;
|
|
|
|
dx = pptlSrc->x - prclDst->left;
|
|
dy = pptlSrc->y - prclDst->top; // Add to destination to get source
|
|
|
|
lSrcDelta = psoSrc->lDelta;
|
|
pjSrcScan0 = psoSrc->pvScan0;
|
|
|
|
ulHwForeMix = gaul32HwMixFromRop2[rop4 & 0xf];
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 10);
|
|
I32_OW(pjIoBase, DP_CONFIG, (WORD)(FG_COLOR_SRC_HOST | BIT16 |
|
|
DRAW | WRITE | LSB_FIRST) );
|
|
I32_OW(pjIoBase, ALU_FG_FN, (WORD) ulHwForeMix );
|
|
I32_OW(pjIoBase, ALU_BG_FN, (WORD) ulHwForeMix );
|
|
|
|
|
|
while(TRUE)
|
|
{
|
|
xLeft = prcl->left;
|
|
xRight = prcl->right;
|
|
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) (xLeft + xOffset) );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) (xRight + xOffset - 1) );
|
|
|
|
yTop = prcl->top;
|
|
cy = prcl->bottom - yTop;
|
|
|
|
// We compute 'xBias' in order to dword-align the source pointer.
|
|
// This way, we don't have to do unaligned reads of the source,
|
|
// and we're guaranteed not to read even a byte past the end of
|
|
// the bitmap.
|
|
//
|
|
// Note that this bias works at 24bpp, too:
|
|
|
|
xBias = (xLeft + dx) & 3; // Floor
|
|
xLeft -= xBias;
|
|
cx = (xRight - xLeft + 3) & ~3; // Ceiling
|
|
|
|
I32_OW(pjIoBase, CUR_X, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_START, (WORD) xLeft + xOffset );
|
|
I32_OW(pjIoBase, DEST_X_END, (WORD) (xLeft + xOffset + cx) );
|
|
I32_OW(pjIoBase, CUR_Y, (WORD) yTop + yOffset );
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, (WORD) (yTop + yOffset + cy) );
|
|
|
|
pjSrc = pjSrcScan0 + (yTop + dy) * lSrcDelta
|
|
+ (xLeft + dx);
|
|
lSrcSkip = lSrcDelta - cx;
|
|
|
|
if (cjPelSize == 1)
|
|
{
|
|
// This part handles 8bpp output:
|
|
|
|
cwSrc = (cx >> 1);
|
|
cxRem = (cx & 1);
|
|
|
|
do {
|
|
for (i = cwSrc; i != 0; i--)
|
|
{
|
|
uw = (USHORT) (pulXlate[*pjSrc++]);
|
|
uw |= (USHORT) (pulXlate[*pjSrc++] << 8);
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 1);
|
|
I32_OW(pjIoBase, PIX_TRANS, uw );
|
|
}
|
|
|
|
if (cxRem > 0)
|
|
{
|
|
uw = (USHORT) (pulXlate[*pjSrc++]);
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 1);
|
|
I32_OW(pjIoBase, PIX_TRANS, uw );
|
|
}
|
|
|
|
pjSrc += lSrcSkip;
|
|
} while (--cy != 0);
|
|
}
|
|
else if (cjPelSize == 2)
|
|
{
|
|
// This part handles 16bpp output:
|
|
|
|
do {
|
|
for (i = cx; i != 0; i--)
|
|
{
|
|
uw = (USHORT) (pulXlate[*pjSrc++]);
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 1);
|
|
I32_OW(pjIoBase, PIX_TRANS, uw );
|
|
}
|
|
|
|
pjSrc += lSrcSkip;
|
|
} while (--cy != 0);
|
|
}
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 7);
|
|
}
|
|
|
|
// Don't forget to reset the clip register:
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 2);
|
|
I32_OW(pjIoBase, EXT_SCISSOR_L, (SHORT) 0 );
|
|
I32_OW(pjIoBase, EXT_SCISSOR_R, (SHORT) M32_MAX_SCISSOR );
|
|
}
|
|
|
|
/******************************Public*Routine******************************\
|
|
* VOID vI32CopyBlt
|
|
*
|
|
* Does a screen-to-screen blt of a list of rectangles.
|
|
*
|
|
\**************************************************************************/
|
|
|
|
VOID vI32CopyBlt( // Type FNCOPY
|
|
PDEV* ppdev,
|
|
LONG c, // Can't be zero
|
|
RECTL* prcl, // Array of relative coordinates destination rectangles
|
|
ULONG rop4, // rop4
|
|
POINTL* pptlSrc, // Original unclipped source point
|
|
RECTL* prclDst) // Original unclipped destination rectangle
|
|
{
|
|
BYTE* pjIoBase;
|
|
LONG xOffset;
|
|
LONG yOffset;
|
|
LONG dx;
|
|
LONG dy;
|
|
LONG xLeft;
|
|
LONG yTop;
|
|
LONG cx;
|
|
LONG cy;
|
|
|
|
ASSERTDD(c > 0, "Can't handle zero rectangles");
|
|
ASSERTDD(((rop4 & 0xff00) >> 8) == (rop4 & 0xff),
|
|
"Expect only a rop2");
|
|
|
|
pjIoBase = ppdev->pjIoBase;
|
|
xOffset = ppdev->xOffset;
|
|
yOffset = ppdev->yOffset;
|
|
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 12);
|
|
|
|
I32_OW(pjIoBase, DP_CONFIG, FG_COLOR_SRC_BLIT | DRAW | WRITE);
|
|
I32_OW(pjIoBase, ALU_FG_FN, gaul32HwMixFromRop2[rop4 & 0xf]);
|
|
|
|
dx = pptlSrc->x - prclDst->left;
|
|
dy = pptlSrc->y - prclDst->top;
|
|
|
|
// The accelerator may not be as fast at doing right-to-left copies, so
|
|
// only do them when the rectangles truly overlap:
|
|
|
|
if (!OVERLAP(prclDst, pptlSrc))
|
|
{
|
|
I32_OW(pjIoBase, SRC_Y_DIR, 1);
|
|
goto Top_Down_Left_To_Right;
|
|
}
|
|
|
|
I32_OW(pjIoBase, SRC_Y_DIR, (prclDst->top <= pptlSrc->y));
|
|
|
|
if (prclDst->top <= pptlSrc->y)
|
|
{
|
|
if (prclDst->left <= pptlSrc->x)
|
|
{
|
|
|
|
Top_Down_Left_To_Right:
|
|
|
|
while (TRUE)
|
|
{
|
|
xLeft = xOffset + prcl->left + dx; // Destination coordinates
|
|
yTop = yOffset + prcl->top + dy;
|
|
cx = prcl->right - prcl->left;
|
|
cy = prcl->bottom - prcl->top;
|
|
|
|
I32_OW(pjIoBase, M32_SRC_X, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_X_START, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_X_END, xLeft + cx);
|
|
I32_OW(pjIoBase, M32_SRC_Y, yTop);
|
|
|
|
xLeft -= dx; // Source coordinates
|
|
yTop -= dy;
|
|
|
|
I32_OW(pjIoBase, CUR_X, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_START, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_END, xLeft + cx);
|
|
I32_OW(pjIoBase, CUR_Y, yTop);
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yTop + cy);
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 9);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
while (TRUE)
|
|
{
|
|
xLeft = xOffset + prcl->left + dx; // Destination coordinates
|
|
yTop = yOffset + prcl->top + dy;
|
|
cx = prcl->right - prcl->left;
|
|
cy = prcl->bottom - prcl->top;
|
|
|
|
I32_OW(pjIoBase, M32_SRC_X, xLeft + cx);
|
|
I32_OW(pjIoBase, M32_SRC_X_START, xLeft + cx);
|
|
I32_OW(pjIoBase, M32_SRC_X_END, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_Y, yTop);
|
|
|
|
xLeft -= dx; // Source coordinates
|
|
yTop -= dy;
|
|
|
|
I32_OW(pjIoBase, CUR_X, xLeft + cx);
|
|
I32_OW(pjIoBase, DEST_X_START, xLeft + cx);
|
|
I32_OW(pjIoBase, DEST_X_END, xLeft);
|
|
I32_OW(pjIoBase, CUR_Y, yTop);
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yTop + cy);
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 9);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (prclDst->left <= pptlSrc->x)
|
|
{
|
|
while (TRUE)
|
|
{
|
|
xLeft = xOffset + prcl->left + dx; // Destination coordinates
|
|
yTop = yOffset + prcl->top + dy - 1;
|
|
cx = prcl->right - prcl->left;
|
|
cy = prcl->bottom - prcl->top;
|
|
|
|
I32_OW(pjIoBase, M32_SRC_X, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_X_START, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_X_END, xLeft + cx);
|
|
I32_OW(pjIoBase, M32_SRC_Y, yTop + cy);
|
|
|
|
xLeft -= dx; // Source coordinates
|
|
yTop -= dy;
|
|
|
|
I32_OW(pjIoBase, CUR_X, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_START, xLeft);
|
|
I32_OW(pjIoBase, DEST_X_END, xLeft + cx);
|
|
I32_OW(pjIoBase, CUR_Y, yTop + cy);
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yTop);
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 9);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
while (TRUE)
|
|
{
|
|
xLeft = xOffset + prcl->left + dx; // Destination coordinates
|
|
yTop = yOffset + prcl->top + dy - 1;
|
|
cx = prcl->right - prcl->left;
|
|
cy = prcl->bottom - prcl->top;
|
|
|
|
I32_OW(pjIoBase, M32_SRC_X, xLeft + cx);
|
|
I32_OW(pjIoBase, M32_SRC_X_START, xLeft + cx);
|
|
I32_OW(pjIoBase, M32_SRC_X_END, xLeft);
|
|
I32_OW(pjIoBase, M32_SRC_Y, yTop + cy);
|
|
|
|
xLeft -= dx; // Source coordinates
|
|
yTop -= dy;
|
|
|
|
I32_OW(pjIoBase, CUR_X, xLeft + cx);
|
|
I32_OW(pjIoBase, DEST_X_START, xLeft + cx);
|
|
I32_OW(pjIoBase, DEST_X_END, xLeft);
|
|
I32_OW(pjIoBase, CUR_Y, yTop + cy);
|
|
|
|
vI32QuietDown(ppdev, pjIoBase);
|
|
|
|
I32_OW(pjIoBase, DEST_Y_END, yTop);
|
|
|
|
if (--c == 0)
|
|
break;
|
|
|
|
prcl++;
|
|
I32_CHECK_FIFO_SPACE(ppdev, pjIoBase, 9);
|
|
}
|
|
}
|
|
}
|
|
}
|