You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2089 lines
61 KiB
2089 lines
61 KiB
/*++
|
|
|
|
Copyright (c) 1992-2000 Microsoft Corporation
|
|
|
|
Module Name:
|
|
|
|
miniport.c
|
|
|
|
Abstract:
|
|
|
|
NDIS Miniport Entry points and utility functions for the NDIS
|
|
MUX Intermediate Miniport sample. The driver exposes zero or more
|
|
Virtual Ethernet LANs (VELANs) as NDIS miniport instances over
|
|
each lower (protocol-edge) binding to an underlying adapter.
|
|
|
|
Environment:
|
|
|
|
Kernel mode.
|
|
|
|
Revision History:
|
|
|
|
|
|
--*/
|
|
|
|
#include "precomp.h"
|
|
#pragma hdrstop
|
|
|
|
#define MODULE_NUMBER MODULE_MINI
|
|
|
|
NDIS_OID VElanSupportedOids[] =
|
|
{
|
|
OID_GEN_SUPPORTED_LIST,
|
|
OID_GEN_HARDWARE_STATUS,
|
|
OID_GEN_MEDIA_SUPPORTED,
|
|
OID_GEN_MEDIA_IN_USE,
|
|
OID_GEN_MAXIMUM_LOOKAHEAD,
|
|
OID_GEN_MAXIMUM_FRAME_SIZE,
|
|
OID_GEN_LINK_SPEED,
|
|
OID_GEN_TRANSMIT_BUFFER_SPACE,
|
|
OID_GEN_RECEIVE_BUFFER_SPACE,
|
|
OID_GEN_TRANSMIT_BLOCK_SIZE,
|
|
OID_GEN_RECEIVE_BLOCK_SIZE,
|
|
OID_GEN_VENDOR_ID,
|
|
OID_GEN_VENDOR_DESCRIPTION,
|
|
OID_GEN_VENDOR_DRIVER_VERSION,
|
|
OID_GEN_CURRENT_PACKET_FILTER,
|
|
OID_GEN_CURRENT_LOOKAHEAD,
|
|
OID_GEN_DRIVER_VERSION,
|
|
OID_GEN_MAXIMUM_TOTAL_SIZE,
|
|
OID_GEN_PROTOCOL_OPTIONS,
|
|
OID_GEN_MAC_OPTIONS,
|
|
OID_GEN_MEDIA_CONNECT_STATUS,
|
|
OID_GEN_MAXIMUM_SEND_PACKETS,
|
|
OID_GEN_XMIT_OK,
|
|
OID_GEN_RCV_OK,
|
|
OID_GEN_XMIT_ERROR,
|
|
OID_GEN_RCV_ERROR,
|
|
OID_GEN_RCV_NO_BUFFER,
|
|
OID_GEN_RCV_CRC_ERROR,
|
|
OID_GEN_TRANSMIT_QUEUE_LENGTH,
|
|
OID_802_3_PERMANENT_ADDRESS,
|
|
OID_802_3_CURRENT_ADDRESS,
|
|
OID_802_3_MULTICAST_LIST,
|
|
OID_802_3_MAXIMUM_LIST_SIZE,
|
|
OID_802_3_RCV_ERROR_ALIGNMENT,
|
|
OID_802_3_XMIT_ONE_COLLISION,
|
|
OID_802_3_XMIT_MORE_COLLISIONS,
|
|
OID_802_3_XMIT_DEFERRED,
|
|
OID_802_3_XMIT_MAX_COLLISIONS,
|
|
OID_802_3_RCV_OVERRUN,
|
|
OID_802_3_XMIT_UNDERRUN,
|
|
OID_802_3_XMIT_HEARTBEAT_FAILURE,
|
|
OID_802_3_XMIT_TIMES_CRS_LOST,
|
|
OID_802_3_XMIT_LATE_COLLISIONS,
|
|
OID_PNP_CAPABILITIES,
|
|
OID_PNP_SET_POWER,
|
|
OID_PNP_QUERY_POWER,
|
|
OID_PNP_ADD_WAKE_UP_PATTERN,
|
|
OID_PNP_REMOVE_WAKE_UP_PATTERN,
|
|
#if IEEE_VLAN_SUPPORT
|
|
OID_GEN_VLAN_ID,
|
|
#endif
|
|
OID_PNP_ENABLE_WAKE_UP
|
|
|
|
};
|
|
|
|
|
|
NDIS_STATUS
|
|
MPInitialize(
|
|
OUT PNDIS_STATUS OpenErrorStatus,
|
|
OUT PUINT SelectedMediumIndex,
|
|
IN PNDIS_MEDIUM MediumArray,
|
|
IN UINT MediumArraySize,
|
|
IN NDIS_HANDLE MiniportAdapterHandle,
|
|
IN NDIS_HANDLE WrapperConfigurationContext
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
This is the Miniport Initialize routine which gets called as a
|
|
result of our call to NdisIMInitializeDeviceInstanceEx.
|
|
The context parameter which we pass there is the VELan structure
|
|
which we retrieve here.
|
|
|
|
Arguments:
|
|
|
|
OpenErrorStatus Not used by us.
|
|
SelectedMediumIndex Place-holder for what media we are using
|
|
MediumArray Array of ndis media passed down to us to pick from
|
|
MediumArraySize Size of the array
|
|
MiniportAdapterHandle The handle NDIS uses to refer to us
|
|
WrapperConfigurationContext For use by NdisOpenConfiguration
|
|
|
|
Return Value:
|
|
|
|
NDIS_STATUS_SUCCESS unless something goes wrong
|
|
|
|
--*/
|
|
{
|
|
UINT i;
|
|
PVELAN pVElan;
|
|
NDIS_STATUS Status = NDIS_STATUS_FAILURE;
|
|
NDIS_HANDLE ConfigurationHandle;
|
|
PVOID NetworkAddress;
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
PNDIS_CONFIGURATION_PARAMETER Params;
|
|
NDIS_STRING strVlanId = NDIS_STRING_CONST("VlanID");
|
|
#endif
|
|
|
|
//
|
|
// Start off by retrieving our virtual miniport context (VELAN) and
|
|
// storing the Miniport handle in it.
|
|
//
|
|
pVElan = NdisIMGetDeviceContext(MiniportAdapterHandle);
|
|
|
|
DBGPRINT(MUX_LOUD, ("==> Miniport Initialize: VELAN %p\n", pVElan));
|
|
|
|
ASSERT(pVElan != NULL);
|
|
ASSERT(pVElan->pAdapt != NULL);
|
|
|
|
do
|
|
{
|
|
pVElan->MiniportAdapterHandle = MiniportAdapterHandle;
|
|
|
|
for (i = 0; i < MediumArraySize; i++)
|
|
{
|
|
if (MediumArray[i] == VELAN_MEDIA_TYPE)
|
|
{
|
|
*SelectedMediumIndex = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == MediumArraySize)
|
|
{
|
|
Status = NDIS_STATUS_UNSUPPORTED_MEDIA;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Access configuration parameters for this miniport.
|
|
//
|
|
NdisOpenConfiguration(
|
|
&Status,
|
|
&ConfigurationHandle,
|
|
WrapperConfigurationContext);
|
|
|
|
if (Status != NDIS_STATUS_SUCCESS)
|
|
{
|
|
break;
|
|
}
|
|
|
|
|
|
NdisReadNetworkAddress(
|
|
&Status,
|
|
&NetworkAddress,
|
|
&i,
|
|
ConfigurationHandle);
|
|
|
|
//
|
|
// If there is a NetworkAddress override, use it
|
|
//
|
|
if (((Status == NDIS_STATUS_SUCCESS)
|
|
&& (i == ETH_LENGTH_OF_ADDRESS))
|
|
&& ((!ETH_IS_MULTICAST(NetworkAddress))
|
|
&& (ETH_IS_LOCALLY_ADMINISTERED (NetworkAddress))))
|
|
{
|
|
|
|
ETH_COPY_NETWORK_ADDRESS(
|
|
pVElan->CurrentAddress,
|
|
NetworkAddress);
|
|
}
|
|
else
|
|
{
|
|
MPGenerateMacAddr(pVElan);
|
|
}
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
//
|
|
// Read VLAN ID
|
|
//
|
|
NdisReadConfiguration(
|
|
&Status,
|
|
&Params,
|
|
ConfigurationHandle,
|
|
&strVlanId,
|
|
NdisParameterInteger);
|
|
if (Status == NDIS_STATUS_SUCCESS)
|
|
{
|
|
//
|
|
// Check for out of bound
|
|
//
|
|
if (Params->ParameterData.IntegerData > VLAN_ID_MAX)
|
|
{
|
|
pVElan->VlanId = VLANID_DEFAULT;
|
|
}
|
|
else
|
|
{
|
|
pVElan->VlanId = Params->ParameterData.IntegerData;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Should fail the initialization or use default value
|
|
//
|
|
pVElan->VlanId = VLANID_DEFAULT;
|
|
Status = NDIS_STATUS_SUCCESS;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
NdisCloseConfiguration(ConfigurationHandle);
|
|
|
|
//
|
|
// Set the attributes now. NDIS_ATTRIBUTE_DESERIALIZE enables us
|
|
// to make up-calls to NDIS from arbitrary execution contexts.
|
|
// This also forces us to protect our data structures using
|
|
// spinlocks where appropriate. Also in this case NDIS does not queue
|
|
// packets on our behalf.
|
|
//
|
|
NdisMSetAttributesEx(MiniportAdapterHandle,
|
|
pVElan,
|
|
0,
|
|
NDIS_ATTRIBUTE_IGNORE_PACKET_TIMEOUT |
|
|
NDIS_ATTRIBUTE_IGNORE_REQUEST_TIMEOUT|
|
|
NDIS_ATTRIBUTE_INTERMEDIATE_DRIVER |
|
|
NDIS_ATTRIBUTE_DESERIALIZE |
|
|
NDIS_ATTRIBUTE_NO_HALT_ON_SUSPEND,
|
|
0);
|
|
|
|
|
|
//
|
|
// Create an ioctl interface
|
|
//
|
|
(VOID)PtRegisterDevice();
|
|
|
|
Status = NDIS_STATUS_SUCCESS;
|
|
} while (FALSE);
|
|
|
|
//
|
|
// If we had received an UnbindAdapter notification on the underlying
|
|
// adapter, we would have blocked that thread waiting for the IM Init
|
|
// process to complete. Wake up any such thread.
|
|
//
|
|
// See PtUnbindAdapter for more details.
|
|
//
|
|
ASSERT(pVElan->MiniportInitPending == TRUE);
|
|
pVElan->MiniportInitPending = FALSE;
|
|
NdisSetEvent(&pVElan->MiniportInitEvent);
|
|
|
|
DBGPRINT(MUX_INFO, ("<== Miniport Initialize: VELAN %p, Status %x\n", pVElan, Status));
|
|
|
|
*OpenErrorStatus = Status;
|
|
return Status;
|
|
}
|
|
|
|
VOID
|
|
MPSendPackets(
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN PPNDIS_PACKET PacketArray,
|
|
IN UINT NumberOfPackets
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Send Packet Array handler. Called by NDIS whenever a protocol
|
|
bound to our VELAN miniport sends one or more packets.
|
|
|
|
We forward each packet to the lower binding.
|
|
|
|
NOTE: NDIS will not Halt this VELAN miniport until all
|
|
these packets are "send-completed", and we don't unbind
|
|
the lower binding until all VELANs are halted. Therefore
|
|
we don't need locks or references on VELAN or ADAPT structures.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext Pointer to our VELAN
|
|
PacketArray Set of packets to send
|
|
NumberOfPackets Length of above array
|
|
|
|
Return Value:
|
|
|
|
None - we call NdisMSendComplete whenever we are done with a packet.
|
|
|
|
--*/
|
|
{
|
|
PVELAN pVElan = (PVELAN)MiniportAdapterContext;
|
|
PADAPT pAdapt = pVElan->pAdapt;
|
|
PNDIS_PACKET Packet, MyPacket;
|
|
NDIS_STATUS Status;
|
|
PVOID MediaSpecificInfo;
|
|
ULONG MediaSpecificInfoSize;
|
|
UINT i;
|
|
|
|
|
|
for (i = 0; i < NumberOfPackets; i++)
|
|
{
|
|
Packet = PacketArray[i];
|
|
|
|
//
|
|
// Allocate a new packet to encapsulate data from the original.
|
|
//
|
|
NdisAllocatePacket(&Status,
|
|
&MyPacket,
|
|
pVElan->SendPacketPoolHandle);
|
|
|
|
if (Status == NDIS_STATUS_SUCCESS)
|
|
{
|
|
PMUX_SEND_RSVD pSendReserved;
|
|
|
|
pSendReserved = MUX_RSVD_FROM_SEND_PACKET(MyPacket);
|
|
pSendReserved->pOriginalPacket = Packet;
|
|
pSendReserved->pVElan = pVElan;
|
|
|
|
MyPacket->Private.Flags = NdisGetPacketFlags(Packet) |
|
|
MUX_SEND_PACKET_FLAGS;
|
|
|
|
MyPacket->Private.Head = Packet->Private.Head;
|
|
MyPacket->Private.Tail = Packet->Private.Tail;
|
|
#ifdef WIN9X
|
|
//
|
|
// Work around the fact that NDIS does not initialize this
|
|
// to FALSE on Win9x.
|
|
//
|
|
MyPacket->Private.ValidCounts = FALSE;
|
|
#endif // WIN9X
|
|
|
|
//
|
|
// Copy OOB data to the new packet.
|
|
//
|
|
NdisMoveMemory(NDIS_OOB_DATA_FROM_PACKET(MyPacket),
|
|
NDIS_OOB_DATA_FROM_PACKET(Packet),
|
|
sizeof(NDIS_PACKET_OOB_DATA));
|
|
//
|
|
// Copy relevant parts of per packet info into the new packet.
|
|
//
|
|
#ifndef WIN9X
|
|
NdisIMCopySendPerPacketInfo(MyPacket, Packet);
|
|
#endif
|
|
|
|
//
|
|
// Copy Media specific information.
|
|
//
|
|
NDIS_GET_PACKET_MEDIA_SPECIFIC_INFO(Packet,
|
|
&MediaSpecificInfo,
|
|
&MediaSpecificInfoSize);
|
|
|
|
if (MediaSpecificInfo || MediaSpecificInfoSize)
|
|
{
|
|
NDIS_SET_PACKET_MEDIA_SPECIFIC_INFO(MyPacket,
|
|
MediaSpecificInfo,
|
|
MediaSpecificInfoSize);
|
|
}
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
Status = MPHandleSendTagging(pVElan, Packet, MyPacket);
|
|
if (Status != NDIS_STATUS_SUCCESS)
|
|
{
|
|
NdisFreePacket(MyPacket);
|
|
NdisMSendComplete(pVElan->MiniportAdapterHandle,
|
|
Packet,
|
|
Status);
|
|
continue;
|
|
}
|
|
#endif
|
|
|
|
//
|
|
// Make note of the upcoming send.
|
|
//
|
|
MUX_INCR_PENDING_SENDS(pVElan);
|
|
|
|
//
|
|
// Send it to the lower binding.
|
|
//
|
|
NdisSend(&Status,
|
|
pAdapt->BindingHandle,
|
|
MyPacket);
|
|
|
|
if (Status != NDIS_STATUS_PENDING)
|
|
{
|
|
PtSendComplete((NDIS_HANDLE)pAdapt,
|
|
MyPacket,
|
|
Status);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Failed to allocate a packet.
|
|
//
|
|
break;
|
|
}
|
|
}
|
|
|
|
//
|
|
// If we bailed out above, fail any unprocessed sends.
|
|
//
|
|
while (i < NumberOfPackets)
|
|
{
|
|
NdisMSendComplete(pVElan->MiniportAdapterHandle,
|
|
PacketArray[i],
|
|
NDIS_STATUS_RESOURCES);
|
|
i++;
|
|
}
|
|
}
|
|
|
|
|
|
NDIS_STATUS
|
|
MPQueryInformation(
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN NDIS_OID Oid,
|
|
IN PVOID InformationBuffer,
|
|
IN ULONG InformationBufferLength,
|
|
OUT PULONG BytesWritten,
|
|
OUT PULONG BytesNeeded
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Entry point called by NDIS to query for the value of the specified OID.
|
|
All OID values are responded to right here, since this is a virtual
|
|
device (not pass-through).
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext Pointer to the adapter structure
|
|
Oid Oid for this query
|
|
InformationBuffer Buffer for information
|
|
InformationBufferLength Size of this buffer
|
|
BytesWritten Specifies how much info is written
|
|
BytesNeeded In case the buffer is smaller than
|
|
what we need, tell them how much is needed
|
|
|
|
|
|
Return Value:
|
|
|
|
Return code from the NdisRequest below.
|
|
|
|
--*/
|
|
{
|
|
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
|
|
PVELAN pVElan;
|
|
NDIS_HARDWARE_STATUS HardwareStatus = NdisHardwareStatusReady;
|
|
NDIS_MEDIUM Medium = VELAN_MEDIA_TYPE;
|
|
UCHAR VendorDesc[] = VELAN_VENDOR_DESC;
|
|
ULONG ulInfo;
|
|
ULONG64 ulInfo64;
|
|
USHORT usInfo;
|
|
PVOID pInfo = (PVOID) &ulInfo;
|
|
ULONG ulInfoLen = sizeof(ulInfo);
|
|
// Should we forward the request to the miniport below?
|
|
BOOLEAN bForwardRequest = FALSE;
|
|
|
|
|
|
pVElan = (PVELAN) MiniportAdapterContext;
|
|
|
|
// Initialize the result
|
|
*BytesWritten = 0;
|
|
*BytesNeeded = 0;
|
|
|
|
switch (Oid)
|
|
{
|
|
case OID_GEN_SUPPORTED_LIST:
|
|
pInfo = (PVOID) VElanSupportedOids;
|
|
ulInfoLen = sizeof(VElanSupportedOids);
|
|
break;
|
|
|
|
case OID_GEN_SUPPORTED_GUIDS:
|
|
//
|
|
// Do NOT forward this down, otherwise we will
|
|
// end up with spurious instances of private WMI
|
|
// classes supported by the lower driver(s).
|
|
//
|
|
Status = NDIS_STATUS_NOT_SUPPORTED;
|
|
break;
|
|
|
|
case OID_GEN_HARDWARE_STATUS:
|
|
pInfo = (PVOID) &HardwareStatus;
|
|
ulInfoLen = sizeof(NDIS_HARDWARE_STATUS);
|
|
break;
|
|
|
|
case OID_GEN_MEDIA_SUPPORTED:
|
|
case OID_GEN_MEDIA_IN_USE:
|
|
pInfo = (PVOID) &Medium;
|
|
ulInfoLen = sizeof(NDIS_MEDIUM);
|
|
break;
|
|
|
|
case OID_GEN_CURRENT_LOOKAHEAD:
|
|
case OID_GEN_MAXIMUM_LOOKAHEAD:
|
|
ulInfo = pVElan->LookAhead - ETH_HEADER_SIZE;
|
|
break;
|
|
|
|
case OID_GEN_MAXIMUM_FRAME_SIZE:
|
|
ulInfo = ETH_MAX_PACKET_SIZE - ETH_HEADER_SIZE;
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
ulInfo -= VLAN_TAG_HEADER_SIZE;
|
|
#endif
|
|
|
|
break;
|
|
|
|
case OID_GEN_MAXIMUM_TOTAL_SIZE:
|
|
case OID_GEN_TRANSMIT_BLOCK_SIZE:
|
|
case OID_GEN_RECEIVE_BLOCK_SIZE:
|
|
ulInfo = (ULONG) ETH_MAX_PACKET_SIZE;
|
|
#if IEEE_VLAN_SUPPORT
|
|
ulInfo -= VLAN_TAG_HEADER_SIZE;
|
|
#endif
|
|
break;
|
|
|
|
case OID_GEN_MAC_OPTIONS:
|
|
ulInfo = NDIS_MAC_OPTION_COPY_LOOKAHEAD_DATA |
|
|
NDIS_MAC_OPTION_TRANSFERS_NOT_PEND |
|
|
NDIS_MAC_OPTION_NO_LOOPBACK;
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
ulInfo |= (NDIS_MAC_OPTION_8021P_PRIORITY |
|
|
NDIS_MAC_OPTION_8021Q_VLAN);
|
|
#endif
|
|
|
|
break;
|
|
|
|
case OID_GEN_LINK_SPEED:
|
|
bForwardRequest = TRUE;
|
|
break;
|
|
|
|
case OID_GEN_TRANSMIT_BUFFER_SPACE:
|
|
ulInfo = ETH_MAX_PACKET_SIZE * pVElan->MaxBusySends;
|
|
#if IEEE_VLAN_SUPPORT
|
|
ulInfo -= VLAN_TAG_HEADER_SIZE * pVElan->MaxBusySends;
|
|
#endif
|
|
break;
|
|
|
|
case OID_GEN_RECEIVE_BUFFER_SPACE:
|
|
ulInfo = ETH_MAX_PACKET_SIZE * pVElan->MaxBusyRecvs;
|
|
#if IEEE_VLAN_SUPPORT
|
|
ulInfo -= VLAN_TAG_HEADER_SIZE * pVElan->MaxBusyRecvs;
|
|
#endif
|
|
|
|
break;
|
|
|
|
case OID_GEN_VENDOR_ID:
|
|
ulInfo = VELAN_VENDOR_ID;
|
|
break;
|
|
|
|
case OID_GEN_VENDOR_DESCRIPTION:
|
|
pInfo = VendorDesc;
|
|
ulInfoLen = sizeof(VendorDesc);
|
|
break;
|
|
|
|
case OID_GEN_VENDOR_DRIVER_VERSION:
|
|
ulInfo = VELAN_VENDOR_ID;
|
|
break;
|
|
|
|
case OID_GEN_DRIVER_VERSION:
|
|
usInfo = (USHORT) VELAN_DRIVER_VERSION;
|
|
pInfo = (PVOID) &usInfo;
|
|
ulInfoLen = sizeof(USHORT);
|
|
break;
|
|
|
|
case OID_802_3_PERMANENT_ADDRESS:
|
|
pInfo = pVElan->PermanentAddress;
|
|
ulInfoLen = ETH_LENGTH_OF_ADDRESS;
|
|
break;
|
|
|
|
case OID_802_3_CURRENT_ADDRESS:
|
|
pInfo = pVElan->CurrentAddress;
|
|
ulInfoLen = ETH_LENGTH_OF_ADDRESS;
|
|
break;
|
|
|
|
case OID_802_3_MAXIMUM_LIST_SIZE:
|
|
ulInfo = VELAN_MAX_MCAST_LIST;
|
|
break;
|
|
|
|
case OID_GEN_MAXIMUM_SEND_PACKETS:
|
|
ulInfo = VELAN_MAX_SEND_PKTS;
|
|
break;
|
|
|
|
case OID_GEN_MEDIA_CONNECT_STATUS:
|
|
//
|
|
// Get this from the adapter below.
|
|
//
|
|
bForwardRequest = TRUE;
|
|
break;
|
|
|
|
case OID_PNP_QUERY_POWER:
|
|
// simply succeed this.
|
|
ulInfoLen = 0;
|
|
break;
|
|
|
|
case OID_PNP_CAPABILITIES:
|
|
case OID_PNP_WAKE_UP_PATTERN_LIST:
|
|
//
|
|
// Pass down these power management/PNP OIDs.
|
|
//
|
|
bForwardRequest = TRUE;
|
|
break;
|
|
|
|
case OID_GEN_XMIT_OK:
|
|
ulInfo64 = pVElan->GoodTransmits;
|
|
pInfo = &ulInfo64;
|
|
if (InformationBufferLength >= sizeof(ULONG64) ||
|
|
InformationBufferLength == 0)
|
|
{
|
|
ulInfoLen = sizeof(ULONG64);
|
|
}
|
|
else
|
|
{
|
|
ulInfoLen = sizeof(ULONG);
|
|
}
|
|
break;
|
|
|
|
case OID_GEN_RCV_OK:
|
|
ulInfo64 = pVElan->GoodReceives;
|
|
pInfo = &ulInfo64;
|
|
if (InformationBufferLength >= sizeof(ULONG64) ||
|
|
InformationBufferLength == 0)
|
|
{
|
|
ulInfoLen = sizeof(ULONG64);
|
|
}
|
|
else
|
|
{
|
|
ulInfoLen = sizeof(ULONG);
|
|
}
|
|
break;
|
|
|
|
case OID_GEN_XMIT_ERROR:
|
|
ulInfo = pVElan->TxAbortExcessCollisions +
|
|
pVElan->TxDmaUnderrun +
|
|
pVElan->TxLostCRS +
|
|
pVElan->TxLateCollisions+
|
|
pVElan->TransmitFailuresOther;
|
|
break;
|
|
|
|
case OID_GEN_RCV_ERROR:
|
|
ulInfo = pVElan->RcvCrcErrors +
|
|
pVElan->RcvAlignmentErrors +
|
|
pVElan->RcvResourceErrors +
|
|
pVElan->RcvDmaOverrunErrors +
|
|
pVElan->RcvRuntErrors;
|
|
#if IEEE_VLAN_SUPPORT
|
|
ulInfo +=
|
|
(pVElan->RcvVlanIdErrors +
|
|
pVElan->RcvFormatErrors);
|
|
#endif
|
|
|
|
break;
|
|
|
|
case OID_GEN_RCV_NO_BUFFER:
|
|
ulInfo = pVElan->RcvResourceErrors;
|
|
break;
|
|
|
|
case OID_GEN_RCV_CRC_ERROR:
|
|
ulInfo = pVElan->RcvCrcErrors;
|
|
break;
|
|
|
|
case OID_GEN_TRANSMIT_QUEUE_LENGTH:
|
|
ulInfo = pVElan->RegNumTcb;
|
|
break;
|
|
|
|
case OID_802_3_RCV_ERROR_ALIGNMENT:
|
|
ulInfo = pVElan->RcvAlignmentErrors;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_ONE_COLLISION:
|
|
ulInfo = pVElan->OneRetry;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_MORE_COLLISIONS:
|
|
ulInfo = pVElan->MoreThanOneRetry;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_DEFERRED:
|
|
ulInfo = pVElan->TxOKButDeferred;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_MAX_COLLISIONS:
|
|
ulInfo = pVElan->TxAbortExcessCollisions;
|
|
break;
|
|
|
|
case OID_802_3_RCV_OVERRUN:
|
|
ulInfo = pVElan->RcvDmaOverrunErrors;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_UNDERRUN:
|
|
ulInfo = pVElan->TxDmaUnderrun;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_HEARTBEAT_FAILURE:
|
|
ulInfo = pVElan->TxLostCRS;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_TIMES_CRS_LOST:
|
|
ulInfo = pVElan->TxLostCRS;
|
|
break;
|
|
|
|
case OID_802_3_XMIT_LATE_COLLISIONS:
|
|
ulInfo = pVElan->TxLateCollisions;
|
|
break;
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
case OID_GEN_VLAN_ID:
|
|
ulInfo = pVElan->VlanId;
|
|
break;
|
|
|
|
#endif
|
|
|
|
default:
|
|
Status = NDIS_STATUS_INVALID_OID;
|
|
break;
|
|
}
|
|
|
|
if (bForwardRequest == FALSE)
|
|
{
|
|
//
|
|
// No need to forward this request down.
|
|
//
|
|
if (Status == NDIS_STATUS_SUCCESS)
|
|
{
|
|
if (ulInfoLen <= InformationBufferLength)
|
|
{
|
|
// Copy result into InformationBuffer
|
|
*BytesWritten = ulInfoLen;
|
|
if(ulInfoLen)
|
|
{
|
|
NdisMoveMemory(InformationBuffer, pInfo, ulInfoLen);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
// too short
|
|
*BytesNeeded = ulInfoLen;
|
|
Status = NDIS_STATUS_BUFFER_TOO_SHORT;
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Send this request to the binding below.
|
|
//
|
|
Status = MPForwardRequest(pVElan,
|
|
NdisRequestQueryInformation,
|
|
Oid,
|
|
InformationBuffer,
|
|
InformationBufferLength,
|
|
BytesWritten,
|
|
BytesNeeded);
|
|
}
|
|
|
|
if ((Status != NDIS_STATUS_SUCCESS) &&
|
|
(Status != NDIS_STATUS_PENDING))
|
|
{
|
|
DBGPRINT(MUX_WARN, ("MPQueryInformation VELAN %p, OID 0x%08x, Status = 0x%08x\n",
|
|
pVElan, Oid, Status));
|
|
}
|
|
|
|
return(Status);
|
|
|
|
}
|
|
|
|
|
|
NDIS_STATUS
|
|
MPSetInformation(
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN NDIS_OID Oid,
|
|
IN PVOID InformationBuffer,
|
|
IN ULONG InformationBufferLength,
|
|
OUT PULONG BytesRead,
|
|
OUT PULONG BytesNeeded
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
This is the handler for an OID set operation. Relevant
|
|
OIDs are forwarded down to the lower miniport for handling.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext Pointer to the adapter structure
|
|
Oid Oid for this query
|
|
InformationBuffer Buffer for information
|
|
InformationBufferLength Size of this buffer
|
|
BytesRead Specifies how much info is read
|
|
BytesNeeded In case the buffer is smaller than what
|
|
we need, tell them how much is needed
|
|
|
|
Return Value:
|
|
|
|
Return code from the NdisRequest below.
|
|
|
|
--*/
|
|
{
|
|
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
|
|
PVELAN pVElan = (PVELAN) MiniportAdapterContext;
|
|
ULONG PacketFilter;
|
|
NDIS_DEVICE_POWER_STATE NewDeviceState;
|
|
|
|
// Should we forward the request to the miniport below?
|
|
BOOLEAN bForwardRequest = FALSE;
|
|
|
|
*BytesRead = 0;
|
|
*BytesNeeded = 0;
|
|
|
|
switch (Oid)
|
|
{
|
|
//
|
|
// Let the miniport below handle these OIDs:
|
|
//
|
|
case OID_PNP_ADD_WAKE_UP_PATTERN:
|
|
case OID_PNP_REMOVE_WAKE_UP_PATTERN:
|
|
case OID_PNP_ENABLE_WAKE_UP:
|
|
bForwardRequest = TRUE;
|
|
break;
|
|
|
|
case OID_PNP_SET_POWER:
|
|
//
|
|
// Store new power state and succeed the request.
|
|
//
|
|
*BytesNeeded = sizeof(NDIS_DEVICE_POWER_STATE);
|
|
if (InformationBufferLength < *BytesNeeded)
|
|
{
|
|
Status = NDIS_STATUS_INVALID_LENGTH;
|
|
break;
|
|
}
|
|
|
|
NewDeviceState = (*(PNDIS_DEVICE_POWER_STATE)InformationBuffer);
|
|
|
|
//
|
|
// Check if the VELAN adapter goes from lower power state to D0
|
|
//
|
|
if ((MUX_IS_LOW_POWER_STATE(pVElan->MPDevicePowerState))
|
|
&& (!MUX_IS_LOW_POWER_STATE(NewDeviceState)))
|
|
{
|
|
//
|
|
// Indicate the media status is necessary
|
|
//
|
|
if (pVElan->LastIndicatedStatus != pVElan->LatestUnIndicateStatus)
|
|
{
|
|
NdisMIndicateStatus(pVElan->MiniportAdapterHandle,
|
|
pVElan->LatestUnIndicateStatus,
|
|
(PVOID)NULL,
|
|
0);
|
|
NdisMIndicateStatusComplete(pVElan->MiniportAdapterHandle);
|
|
pVElan->LastIndicatedStatus = pVElan->LatestUnIndicateStatus;
|
|
}
|
|
}
|
|
//
|
|
// Check if the VELAN adapter goes from D0 to lower power state
|
|
//
|
|
if ((!MUX_IS_LOW_POWER_STATE(pVElan->MPDevicePowerState))
|
|
&& (MUX_IS_LOW_POWER_STATE(NewDeviceState)))
|
|
{
|
|
//
|
|
// Initialize LastUnIndicateStatus
|
|
//
|
|
pVElan->LatestUnIndicateStatus = pVElan->LastIndicatedStatus;
|
|
}
|
|
|
|
NdisMoveMemory(&pVElan->MPDevicePowerState,
|
|
InformationBuffer,
|
|
*BytesNeeded);
|
|
|
|
DBGPRINT(MUX_INFO, ("SetInfo: VElan %p, new miniport power state --- %d\n",
|
|
pVElan, pVElan->MPDevicePowerState));
|
|
|
|
break;
|
|
|
|
case OID_802_3_MULTICAST_LIST:
|
|
Status = MPSetMulticastList(pVElan,
|
|
InformationBuffer,
|
|
InformationBufferLength,
|
|
BytesRead,
|
|
BytesNeeded);
|
|
break;
|
|
|
|
case OID_GEN_CURRENT_PACKET_FILTER:
|
|
if (InformationBufferLength != sizeof(ULONG))
|
|
{
|
|
Status = NDIS_STATUS_INVALID_LENGTH;
|
|
*BytesNeeded = sizeof(ULONG);
|
|
break;
|
|
}
|
|
|
|
NdisMoveMemory(&PacketFilter, InformationBuffer, sizeof(ULONG));
|
|
*BytesRead = sizeof(ULONG);
|
|
|
|
Status = MPSetPacketFilter(pVElan,
|
|
PacketFilter);
|
|
break;
|
|
|
|
case OID_GEN_CURRENT_LOOKAHEAD:
|
|
#if IEEE_VLAN_SUPPORT
|
|
//
|
|
// In order to simplify parsing and to avoid excessive
|
|
// copying, we need the tag header also to be present in the
|
|
// lookahead buffer. Make sure that the driver below
|
|
// includes that.
|
|
//
|
|
*(UNALIGNED PULONG)InformationBuffer += VLAN_TAG_HEADER_SIZE;
|
|
#endif
|
|
bForwardRequest = TRUE;
|
|
break;
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
case OID_GEN_VLAN_ID:
|
|
if (InformationBufferLength != sizeof(ULONG))
|
|
{
|
|
Status = NDIS_STATUS_INVALID_LENGTH;
|
|
*BytesNeeded = sizeof(ULONG);
|
|
break;
|
|
}
|
|
NdisMoveMemory(&(pVElan->VlanId), InformationBuffer, sizeof(ULONG));
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
Status = NDIS_STATUS_INVALID_OID;
|
|
break;
|
|
|
|
}
|
|
|
|
if (bForwardRequest == FALSE)
|
|
{
|
|
if (Status == NDIS_STATUS_SUCCESS)
|
|
{
|
|
*BytesRead = InformationBufferLength;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Send this request to the binding below.
|
|
//
|
|
Status = MPForwardRequest(pVElan,
|
|
NdisRequestSetInformation,
|
|
Oid,
|
|
InformationBuffer,
|
|
InformationBufferLength,
|
|
BytesRead,
|
|
BytesNeeded);
|
|
}
|
|
|
|
return(Status);
|
|
}
|
|
|
|
VOID
|
|
MPReturnPacket(
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN PNDIS_PACKET Packet
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
NDIS Miniport entry point called whenever protocols are done with
|
|
a packet that we had indicated up and they had queued up for returning
|
|
later.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext - pointer to VELAN structure
|
|
Packet - packet being returned.
|
|
|
|
Return Value:
|
|
|
|
None.
|
|
|
|
--*/
|
|
{
|
|
PVELAN pVElan = (PVELAN)MiniportAdapterContext;
|
|
PNDIS_PACKET pOriginalPacket;
|
|
PMUX_RECV_RSVD pRecvRsvd;
|
|
#if IEEE_VLAN_SUPPORT
|
|
NDIS_PACKET_8021Q_INFO NdisPacket8021qInfo;
|
|
#endif
|
|
|
|
pRecvRsvd = MUX_RSVD_FROM_RECV_PACKET(Packet);
|
|
pOriginalPacket = pRecvRsvd->pOriginalPacket;
|
|
|
|
//
|
|
// Reclaim our packet.
|
|
//
|
|
#if IEEE_VLAN_SUPPORT
|
|
//
|
|
// We would have set per-packet information if we had
|
|
// extracted a tag header from the received packet.
|
|
//
|
|
NdisPacket8021qInfo.Value = NDIS_PER_PACKET_INFO_FROM_PACKET (
|
|
Packet,
|
|
Ieee8021QInfo);
|
|
//
|
|
// If we did remove the tag header from the received packet,
|
|
// we would have allocated a buffer to describe the "untagged"
|
|
// header (see PtHandleRcvTagging); free it.
|
|
//
|
|
if (NdisPacket8021qInfo.Value)
|
|
{
|
|
NdisFreeBuffer(Packet->Private.Head);
|
|
}
|
|
|
|
#endif
|
|
|
|
NdisFreePacket(Packet);
|
|
|
|
//
|
|
// Return the original packet received at our protocol
|
|
// edge, if any.
|
|
//
|
|
// NOTE that we might end up calling NdisReturnPackets
|
|
// multiple times with the same "lower" packet, based on
|
|
// the number of VELANs to which we had indicated that
|
|
// packet. The number of times we do so should match
|
|
// the return value from our PtReceivePacket handler.
|
|
//
|
|
if (pOriginalPacket != NULL)
|
|
{
|
|
NdisReturnPackets(&pOriginalPacket, 1);
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// If no original packet, then we have been called
|
|
// here to reclaim a packet used to forward up
|
|
// a non-packet receive (see PtReceive). There
|
|
// is nothing more to be done.
|
|
//
|
|
}
|
|
|
|
|
|
MUX_DECR_PENDING_RECEIVES(pVElan);
|
|
}
|
|
|
|
|
|
NDIS_STATUS
|
|
MPTransferData(
|
|
OUT PNDIS_PACKET Packet,
|
|
OUT PUINT BytesTransferred,
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN NDIS_HANDLE MiniportReceiveContext,
|
|
IN UINT ByteOffset,
|
|
IN UINT BytesToTransfer
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Miniport's transfer data handler. This is called if we had
|
|
indicated receive data using a non-packet API, for e.g. if
|
|
the lookahead buffer did not contain the entire data.
|
|
|
|
We need to forward this to the miniport below to that it can
|
|
copy in the rest of the data. We call NdisTransferData to do so.
|
|
However, when that completes (see PtTransferDataComplete), we
|
|
have to get back at the VELAN from which this packet came so that
|
|
we can complete this request with the right MiniportAdapterHandle.
|
|
We therefore allocate a new packet, pointing to the same buffer
|
|
as the packet just passed in, and use reserved space in the packet
|
|
to hold a backpointer to the VELAN from which this came.
|
|
|
|
Arguments:
|
|
|
|
Packet Destination packet
|
|
BytesTransferred Place to return how much data was copied
|
|
MiniportAdapterContext Pointer to the VELAN structure
|
|
MiniportReceiveContext Context
|
|
ByteOffset Offset into the packet for copying data
|
|
BytesToTransfer How much to copy.
|
|
|
|
Return Value:
|
|
|
|
Status of transfer
|
|
|
|
--*/
|
|
{
|
|
PVELAN pVElan = (PVELAN)MiniportAdapterContext;
|
|
NDIS_STATUS Status;
|
|
PNDIS_PACKET MyPacket;
|
|
PMUX_TD_RSVD pTDReserved;
|
|
#if IEEE_VLAN_SUPPORT
|
|
PMUX_RCV_CONTEXT pMuxRcvContext;
|
|
#endif
|
|
|
|
|
|
do
|
|
{
|
|
NdisAllocatePacket(&Status,
|
|
&MyPacket,
|
|
pVElan->SendPacketPoolHandle);
|
|
|
|
if (Status != NDIS_STATUS_SUCCESS)
|
|
{
|
|
break;
|
|
}
|
|
|
|
pTDReserved = MUX_RSVD_FROM_TD_PACKET(MyPacket);
|
|
pTDReserved->pOriginalPacket = Packet;
|
|
pTDReserved->pVElan = pVElan;
|
|
|
|
MyPacket->Private.Flags = NdisGetPacketFlags(Packet) |
|
|
MUX_SEND_PACKET_FLAGS;
|
|
|
|
MyPacket->Private.Head = Packet->Private.Head;
|
|
MyPacket->Private.Tail = Packet->Private.Tail;
|
|
#ifdef WIN9X
|
|
//
|
|
// Work around the fact that NDIS does not initialize this
|
|
// field on Win9x.
|
|
//
|
|
MyPacket->Private.ValidCounts = FALSE;
|
|
#endif // WIN9X
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
//
|
|
// Check if the original received packet did contain a
|
|
// VLAN tag header. If so, make sure we get the upcoming
|
|
// call to NdisTransferData to skip the tag header.
|
|
//
|
|
pMuxRcvContext = (PMUX_RCV_CONTEXT)MiniportReceiveContext;
|
|
if (pMuxRcvContext->TagHeaderLen == VLAN_TAG_HEADER_SIZE)
|
|
{
|
|
//
|
|
// There was a tag header in the received packet.
|
|
//
|
|
ByteOffset += VLAN_TAG_HEADER_SIZE;
|
|
|
|
//
|
|
// Copy the 8021Q info into the packet
|
|
//
|
|
NDIS_PER_PACKET_INFO_FROM_PACKET(Packet, Ieee8021QInfo) =
|
|
pMuxRcvContext->NdisPacket8021QInfo.Value;
|
|
}
|
|
|
|
//
|
|
// Get back the lower driver's receive context for this indication.
|
|
//
|
|
MiniportReceiveContext = pMuxRcvContext->MacRcvContext;
|
|
#endif
|
|
|
|
NdisTransferData(&Status,
|
|
pVElan->pAdapt->BindingHandle,
|
|
MiniportReceiveContext,
|
|
ByteOffset,
|
|
BytesToTransfer,
|
|
MyPacket,
|
|
BytesTransferred);
|
|
|
|
if (Status != NDIS_STATUS_PENDING)
|
|
{
|
|
PtTransferDataComplete(pVElan->pAdapt,
|
|
MyPacket,
|
|
Status,
|
|
*BytesTransferred);
|
|
|
|
Status = NDIS_STATUS_PENDING;
|
|
}
|
|
}
|
|
while (FALSE);
|
|
|
|
return(Status);
|
|
}
|
|
|
|
|
|
|
|
VOID
|
|
MPHalt(
|
|
IN NDIS_HANDLE MiniportAdapterContext
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Halt handler. Add any further clean-up for the VELAN to this
|
|
function.
|
|
|
|
We wait for all pending I/O on the VELAN to complete and then
|
|
unlink the VELAN from the adapter.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext Pointer to the pVElan
|
|
|
|
Return Value:
|
|
|
|
None.
|
|
|
|
--*/
|
|
{
|
|
PVELAN pVElan = (PVELAN)MiniportAdapterContext;
|
|
|
|
|
|
DBGPRINT(MUX_LOUD, ("==>MiniportHalt: VELAN %p\n", pVElan));
|
|
|
|
//
|
|
// Mark the VELAN so that we don't send down any new requests or
|
|
// sends to the adapter below, or new receives/indications to
|
|
// protocols above.
|
|
//
|
|
pVElan->MiniportHalting = TRUE;
|
|
|
|
//
|
|
// Update the packet filter on the underlying adapter if needed.
|
|
//
|
|
if (pVElan->PacketFilter != 0)
|
|
{
|
|
MPSetPacketFilter(pVElan, 0);
|
|
}
|
|
|
|
//
|
|
// Wait for any outstanding sends or requests to complete.
|
|
//
|
|
while (pVElan->OutstandingSends)
|
|
{
|
|
DBGPRINT(MUX_INFO, ("MiniportHalt: VELAN %p has %d outstanding sends\n",
|
|
pVElan, pVElan->OutstandingSends));
|
|
NdisMSleep(20000);
|
|
}
|
|
|
|
//
|
|
// Wait for all outstanding indications to be completed and
|
|
// any pended receive packets to be returned to us.
|
|
//
|
|
while (pVElan->OutstandingReceives)
|
|
{
|
|
DBGPRINT(MUX_INFO, ("MiniportHalt: VELAN %p has %d outstanding receives\n",
|
|
pVElan, pVElan->OutstandingReceives));
|
|
NdisMSleep(20000);
|
|
}
|
|
|
|
//
|
|
// Delete the ioctl interface that was created when the miniport
|
|
// was created.
|
|
//
|
|
(VOID)PtDeregisterDevice();
|
|
|
|
//
|
|
// Unlink the VELAN from its parent ADAPT structure. This will
|
|
// dereference the VELAN.
|
|
//
|
|
pVElan->MiniportAdapterHandle = NULL;
|
|
PtUnlinkVElanFromAdapter(pVElan);
|
|
|
|
DBGPRINT(MUX_LOUD, ("<== MiniportHalt: pVElan %p\n", pVElan));
|
|
}
|
|
|
|
|
|
NDIS_STATUS
|
|
MPForwardRequest(
|
|
IN PVELAN pVElan,
|
|
IN NDIS_REQUEST_TYPE RequestType,
|
|
IN NDIS_OID Oid,
|
|
IN PVOID InformationBuffer,
|
|
IN ULONG InformationBufferLength,
|
|
OUT PULONG BytesReadOrWritten,
|
|
OUT PULONG BytesNeeded
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Utility routine that forwards an NDIS request made on a VELAN to the
|
|
lower binding. Since at most a single request can be pended on a VELAN,
|
|
we use the pre-allocated request structure embedded in the VELAN struct.
|
|
|
|
Arguments:
|
|
|
|
|
|
Return Value:
|
|
|
|
NDIS_STATUS_PENDING if a request was sent down.
|
|
|
|
--*/
|
|
{
|
|
NDIS_STATUS Status;
|
|
PMUX_NDIS_REQUEST pMuxNdisRequest = &pVElan->Request;
|
|
|
|
DBGPRINT(MUX_LOUD, ("MPForwardRequest: VELAN %p, OID %x\n", pVElan, Oid));
|
|
|
|
do
|
|
{
|
|
MUX_INCR_PENDING_SENDS(pVElan);
|
|
|
|
//
|
|
// If the miniport below is going away, fail the request
|
|
//
|
|
NdisAcquireSpinLock(&pVElan->Lock);
|
|
if (pVElan->DeInitializing == TRUE)
|
|
{
|
|
NdisReleaseSpinLock(&pVElan->Lock);
|
|
MUX_DECR_PENDING_SENDS(pVElan);
|
|
Status = NDIS_STATUS_FAILURE;
|
|
break;
|
|
}
|
|
NdisReleaseSpinLock(&pVElan->Lock);
|
|
|
|
//
|
|
// If the virtual miniport edge is at a low power
|
|
// state, fail this request.
|
|
//
|
|
if (MUX_IS_LOW_POWER_STATE(pVElan->MPDevicePowerState))
|
|
{
|
|
MUX_DECR_PENDING_SENDS(pVElan);
|
|
Status = NDIS_STATUS_ADAPTER_NOT_READY;
|
|
break;
|
|
}
|
|
|
|
pVElan->BytesNeeded = BytesNeeded;
|
|
pVElan->BytesReadOrWritten = BytesReadOrWritten;
|
|
pMuxNdisRequest->pCallback = PtCompleteForwardedRequest;
|
|
|
|
switch (RequestType)
|
|
{
|
|
case NdisRequestQueryInformation:
|
|
pMuxNdisRequest->Request.RequestType = NdisRequestQueryInformation;
|
|
pMuxNdisRequest->Request.DATA.QUERY_INFORMATION.Oid = Oid;
|
|
pMuxNdisRequest->Request.DATA.QUERY_INFORMATION.InformationBuffer =
|
|
InformationBuffer;
|
|
pMuxNdisRequest->Request.DATA.QUERY_INFORMATION.InformationBufferLength =
|
|
InformationBufferLength;
|
|
break;
|
|
|
|
case NdisRequestSetInformation:
|
|
pMuxNdisRequest->Request.RequestType = NdisRequestSetInformation;
|
|
pMuxNdisRequest->Request.DATA.SET_INFORMATION.Oid = Oid;
|
|
pMuxNdisRequest->Request.DATA.SET_INFORMATION.InformationBuffer =
|
|
InformationBuffer;
|
|
pMuxNdisRequest->Request.DATA.SET_INFORMATION.InformationBufferLength =
|
|
InformationBufferLength;
|
|
break;
|
|
|
|
default:
|
|
ASSERT(FALSE);
|
|
break;
|
|
}
|
|
|
|
//
|
|
// If the miniport below is going away
|
|
//
|
|
NdisAcquireSpinLock(&pVElan->Lock);
|
|
if (pVElan->DeInitializing == TRUE)
|
|
{
|
|
NdisReleaseSpinLock(&pVElan->Lock);
|
|
MUX_DECR_PENDING_SENDS(pVElan);
|
|
Status = NDIS_STATUS_FAILURE;
|
|
break;
|
|
}
|
|
|
|
// If the lower binding has been notified of a low
|
|
// power state, queue this request; it will be picked
|
|
// up again when the lower binding returns to D0.
|
|
//
|
|
if (MUX_IS_LOW_POWER_STATE(pVElan->pAdapt->PtDevicePowerState))
|
|
{
|
|
DBGPRINT(MUX_INFO, ("ForwardRequest: VELAN %p, Adapt %p power"
|
|
" state is %d, queueing OID %x\n",
|
|
pVElan, pVElan->pAdapt,
|
|
pVElan->pAdapt->PtDevicePowerState, Oid));
|
|
|
|
pVElan->QueuedRequest = TRUE;
|
|
NdisReleaseSpinLock(&pVElan->Lock);
|
|
Status = NDIS_STATUS_PENDING;
|
|
break;
|
|
}
|
|
NdisReleaseSpinLock(&pVElan->Lock);
|
|
|
|
NdisRequest(&Status,
|
|
pVElan->BindingHandle,
|
|
&pMuxNdisRequest->Request);
|
|
|
|
if (Status != NDIS_STATUS_PENDING)
|
|
{
|
|
PtRequestComplete(pVElan->pAdapt, &pMuxNdisRequest->Request, Status);
|
|
Status = NDIS_STATUS_PENDING;
|
|
break;
|
|
}
|
|
}
|
|
while (FALSE);
|
|
|
|
return (Status);
|
|
}
|
|
|
|
NDIS_STATUS
|
|
MPSetPacketFilter(
|
|
IN PVELAN pVElan,
|
|
IN ULONG PacketFilter
|
|
)
|
|
/*++
|
|
Routine Description:
|
|
|
|
This routine will set up the VELAN so that it accepts packets
|
|
that match the specified packet filter. The only filter bits
|
|
that can truly be toggled are for broadcast and promiscuous.
|
|
|
|
The MUX driver always sets the lower binding to promiscuous
|
|
mode, but we do some optimization here to avoid turning on
|
|
receives too soon. That is, we set the packet filter on the lower
|
|
binding to a non-zero value iff at least one of the VELANs
|
|
has a non-zero filter value.
|
|
|
|
NOTE: setting the lower binding to promiscuous mode can
|
|
impact CPU utilization. The only reason we set the lower binding
|
|
to promiscuous mode in this sample is that we need to be able
|
|
to receive unicast frames directed to MAC address(es) that do not
|
|
match the local adapter's MAC address. If VELAN MAC addresses
|
|
are set to be equal to that of the adapter below, it is sufficient
|
|
to set the lower packet filter to the bitwise OR'ed value of
|
|
packet filter settings on all VELANs.
|
|
|
|
|
|
Arguments:
|
|
|
|
pVElan - pointer to VELAN
|
|
PacketFilter - the new packet filter
|
|
|
|
Return Value:
|
|
|
|
NDIS_STATUS_SUCCESS
|
|
NDIS_STATUS_NOT_SUPPORTED
|
|
|
|
--*/
|
|
{
|
|
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
|
|
PADAPT pAdapt;
|
|
PVELAN pTmpVElan;
|
|
PLIST_ENTRY p;
|
|
ULONG AdapterFilter;
|
|
BOOLEAN bSendUpdate = FALSE;
|
|
LOCK_STATE LockState;
|
|
|
|
DBGPRINT(MUX_LOUD, ("=> SetPacketFilter VELAN %p, Filter %x\n", pVElan, PacketFilter));
|
|
|
|
do
|
|
{
|
|
//
|
|
// Any bits not supported?
|
|
//
|
|
if (PacketFilter & ~VELAN_SUPPORTED_FILTERS)
|
|
{
|
|
Status = NDIS_STATUS_NOT_SUPPORTED;
|
|
break;
|
|
}
|
|
|
|
AdapterFilter = 0;
|
|
pAdapt = pVElan->pAdapt;
|
|
|
|
//
|
|
// Grab a Write lock on the adapter so that this operation
|
|
// does not interfere with any receives that might be accessing
|
|
// filter information.
|
|
//
|
|
MUX_ACQUIRE_ADAPT_WRITE_LOCK(pAdapt, &LockState);
|
|
|
|
//
|
|
// Save the new packet filter value
|
|
//
|
|
pVElan->PacketFilter = PacketFilter;
|
|
|
|
//
|
|
// Compute the new combined filter for all VELANs on this
|
|
// adapter.
|
|
//
|
|
for (p = pAdapt->VElanList.Flink;
|
|
p != &pAdapt->VElanList;
|
|
p = p->Flink)
|
|
{
|
|
pTmpVElan = CONTAINING_RECORD(p, VELAN, Link);
|
|
AdapterFilter |= pTmpVElan->PacketFilter;
|
|
}
|
|
|
|
//
|
|
// If all VELANs have packet filters set to 0, turn off
|
|
// receives on the lower adapter, if not already done.
|
|
//
|
|
if ((AdapterFilter == 0) && (pAdapt->PacketFilter != 0))
|
|
{
|
|
bSendUpdate = TRUE;
|
|
pAdapt->PacketFilter = 0;
|
|
}
|
|
else
|
|
//
|
|
// If receives had been turned off on the lower adapter, and
|
|
// the new filter is non-zero, turn on the lower adapter.
|
|
// We set the adapter to promiscuous mode in this sample
|
|
// so that we are able to receive packets directed to
|
|
// any of the VELAN MAC addresses.
|
|
//
|
|
if ((AdapterFilter != 0) && (pAdapt->PacketFilter == 0))
|
|
{
|
|
bSendUpdate = TRUE;
|
|
pAdapt->PacketFilter = MUX_ADAPTER_PACKET_FILTER;
|
|
}
|
|
|
|
MUX_RELEASE_ADAPT_WRITE_LOCK(pAdapt, &LockState);
|
|
|
|
if (bSendUpdate)
|
|
{
|
|
PtRequestAdapterAsync(
|
|
pAdapt,
|
|
NdisRequestSetInformation,
|
|
OID_GEN_CURRENT_PACKET_FILTER,
|
|
&pAdapt->PacketFilter,
|
|
sizeof(pAdapt->PacketFilter),
|
|
PtDiscardCompletedRequest);
|
|
}
|
|
|
|
}
|
|
while (FALSE);
|
|
|
|
DBGPRINT(MUX_INFO, ("<= SetPacketFilter VELAN %p, Status %x\n", pVElan, Status));
|
|
|
|
return(Status);
|
|
}
|
|
|
|
|
|
NDIS_STATUS
|
|
MPSetMulticastList(
|
|
IN PVELAN pVElan,
|
|
IN PVOID InformationBuffer,
|
|
IN ULONG InformationBufferLength,
|
|
OUT PULONG pBytesRead,
|
|
OUT PULONG pBytesNeeded
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Set the multicast list on the specified VELAN miniport.
|
|
We simply validate all information and copy in the multicast
|
|
list.
|
|
|
|
We don't forward the multicast list information down since
|
|
we set the lower binding to promisc. mode.
|
|
|
|
Arguments:
|
|
|
|
pVElan - VELAN on which to set the multicast list
|
|
InformationBuffer - pointer to new multicast list
|
|
InformationBufferLength - length in bytes of above list
|
|
pBytesRead - place to return # of bytes read from the above
|
|
pBytesNeeded - place to return expected min # of bytes
|
|
|
|
Return Value:
|
|
|
|
NDIS_STATUS
|
|
|
|
--*/
|
|
{
|
|
NDIS_STATUS Status;
|
|
PADAPT pAdapt;
|
|
LOCK_STATE LockState;
|
|
|
|
//
|
|
// Initialize.
|
|
//
|
|
*pBytesNeeded = sizeof(MUX_MAC_ADDRESS);
|
|
*pBytesRead = 0;
|
|
Status = NDIS_STATUS_SUCCESS;
|
|
|
|
do
|
|
{
|
|
if (InformationBufferLength % sizeof(MUX_MAC_ADDRESS))
|
|
{
|
|
Status = NDIS_STATUS_INVALID_LENGTH;
|
|
break;
|
|
}
|
|
|
|
if (InformationBufferLength > (VELAN_MAX_MCAST_LIST * sizeof(MUX_MAC_ADDRESS)))
|
|
{
|
|
Status = NDIS_STATUS_MULTICAST_FULL;
|
|
*pBytesNeeded = VELAN_MAX_MCAST_LIST * sizeof(MUX_MAC_ADDRESS);
|
|
break;
|
|
}
|
|
|
|
pAdapt = pVElan->pAdapt;
|
|
|
|
//
|
|
// Grab a Write lock on the adapter so that this operation
|
|
// does not interfere with any receives that might be accessing
|
|
// multicast list information.
|
|
//
|
|
MUX_ACQUIRE_ADAPT_WRITE_LOCK(pAdapt, &LockState);
|
|
|
|
NdisZeroMemory(&pVElan->McastAddrs[0],
|
|
VELAN_MAX_MCAST_LIST * sizeof(MUX_MAC_ADDRESS));
|
|
|
|
NdisMoveMemory(&pVElan->McastAddrs[0],
|
|
InformationBuffer,
|
|
InformationBufferLength);
|
|
|
|
pVElan->McastAddrCount = InformationBufferLength / sizeof(MUX_MAC_ADDRESS);
|
|
|
|
MUX_RELEASE_ADAPT_WRITE_LOCK(pAdapt, &LockState);
|
|
}
|
|
while (FALSE);
|
|
|
|
return (Status);
|
|
}
|
|
|
|
|
|
//
|
|
// Careful! Uses static storage for string. Used to simplify DbgPrints
|
|
// of MAC addresses.
|
|
//
|
|
PUCHAR
|
|
MacAddrToString(PVOID In)
|
|
{
|
|
static UCHAR String[20];
|
|
static PCHAR HexChars = "0123456789abcdef";
|
|
PUCHAR EthAddr = (PUCHAR) In;
|
|
UINT i;
|
|
PUCHAR s;
|
|
|
|
for (i = 0, s = String; i < 6; i++, EthAddr++)
|
|
{
|
|
*s++ = HexChars[(*EthAddr) >> 4];
|
|
*s++ = HexChars[(*EthAddr) & 0xf];
|
|
}
|
|
*s = '\0';
|
|
return String;
|
|
}
|
|
|
|
|
|
VOID
|
|
MPGenerateMacAddr(
|
|
PVELAN pVElan
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Generates a "virtual" MAC address for a VELAN.
|
|
NOTE: this is only a sample implementation of selecting
|
|
a MAC address for the VELAN. Other implementations are possible,
|
|
including using the MAC address of the underlying adapter as
|
|
the MAC address of the VELAN.
|
|
|
|
Arguments:
|
|
|
|
pVElan - Pointer to velan structure
|
|
|
|
Return Value:
|
|
|
|
None
|
|
|
|
--*/
|
|
{
|
|
pVElan->PermanentAddress[0] =
|
|
0x02 | (((UCHAR)pVElan->VElanNumber & 0x3f) << 2);
|
|
pVElan->PermanentAddress[1] =
|
|
0x02 | (((UCHAR)pVElan->VElanNumber & 0x3f) << 3);
|
|
|
|
ETH_COPY_NETWORK_ADDRESS(
|
|
pVElan->CurrentAddress,
|
|
pVElan->PermanentAddress);
|
|
|
|
DBGPRINT(MUX_LOUD, ("%d CurrentAddress %s\n",
|
|
pVElan->VElanNumber, MacAddrToString(&pVElan->CurrentAddress)));
|
|
DBGPRINT(MUX_LOUD, ("%d PermanentAddress %s\n",
|
|
pVElan->VElanNumber, MacAddrToString(&pVElan->PermanentAddress)));
|
|
|
|
}
|
|
|
|
|
|
#ifdef NDIS51_MINIPORT
|
|
|
|
VOID
|
|
MPCancelSendPackets(
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN PVOID CancelId
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
The miniport entry point to handle cancellation of all send packets
|
|
that match the given CancelId. If we have queued any packets that match
|
|
this, then we should dequeue them and call NdisMSendComplete for all
|
|
such packets, with a status of NDIS_STATUS_REQUEST_ABORTED.
|
|
|
|
We should also call NdisCancelSendPackets in turn, on each lower binding
|
|
that this adapter corresponds to. This is to let miniports below cancel
|
|
any matching packets.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext - pointer to VELAN structure
|
|
CancelId - ID of packets to be cancelled.
|
|
|
|
Return Value:
|
|
|
|
None
|
|
|
|
--*/
|
|
{
|
|
PVELAN pVElan = (PVELAN)MiniportAdapterContext;
|
|
|
|
//
|
|
// If we queue packets on our VELAN/adapter structure, this would be
|
|
// the place to acquire a spinlock to it, unlink any packets whose
|
|
// Id matches CancelId, release the spinlock and call NdisMSendComplete
|
|
// with NDIS_STATUS_REQUEST_ABORTED for all unlinked packets.
|
|
//
|
|
|
|
//
|
|
// Next, pass this down so that we let the miniport(s) below cancel
|
|
// any packets that they might have queued.
|
|
//
|
|
NdisCancelSendPackets(pVElan->pAdapt->BindingHandle, CancelId);
|
|
|
|
return;
|
|
}
|
|
|
|
VOID
|
|
MPDevicePnPEvent(
|
|
IN NDIS_HANDLE MiniportAdapterContext,
|
|
IN NDIS_DEVICE_PNP_EVENT DevicePnPEvent,
|
|
IN PVOID InformationBuffer,
|
|
IN ULONG InformationBufferLength
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
This handler is called to notify us of PnP events directed to
|
|
our miniport device object.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext - pointer to VELAN structure
|
|
DevicePnPEvent - the event
|
|
InformationBuffer - Points to additional event-specific information
|
|
InformationBufferLength - length of above
|
|
|
|
Return Value:
|
|
|
|
None
|
|
--*/
|
|
{
|
|
// TBD - add code/comments about processing this.
|
|
|
|
UNREFERENCED_PARAMETER(MiniportAdapterContext);
|
|
UNREFERENCED_PARAMETER(DevicePnPEvent);
|
|
UNREFERENCED_PARAMETER(InformationBuffer);
|
|
UNREFERENCED_PARAMETER(InformationBufferLength);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
VOID
|
|
MPAdapterShutdown(
|
|
IN NDIS_HANDLE MiniportAdapterContext
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
This handler is called to notify us of an impending system shutdown.
|
|
Since this is not a hardware driver, there isn't anything specific
|
|
we need to do about this.
|
|
|
|
Arguments:
|
|
|
|
MiniportAdapterContext - pointer to VELAN structure
|
|
|
|
Return Value:
|
|
|
|
None
|
|
--*/
|
|
{
|
|
UNREFERENCED_PARAMETER(MiniportAdapterContext);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
#endif // NDIS51_MINIPORT
|
|
|
|
VOID
|
|
MPUnload(
|
|
IN PDRIVER_OBJECT DriverObject
|
|
)
|
|
{
|
|
NDIS_STATUS Status;
|
|
|
|
#if !DBG
|
|
UNREFERENCED_PARAMETER(DriverObject);
|
|
#endif
|
|
|
|
DBGPRINT(MUX_LOUD, ("==> MPUnload: DriverObj %p\n", DriverObject));
|
|
NdisDeregisterProtocol(&Status, ProtHandle);
|
|
DBGPRINT(MUX_LOUD, ("<== MPUnload \n"));
|
|
}
|
|
|
|
#if IEEE_VLAN_SUPPORT
|
|
NDIS_STATUS
|
|
MPHandleSendTagging(
|
|
IN PVELAN pVElan,
|
|
IN PNDIS_PACKET Packet,
|
|
IN OUT PNDIS_PACKET MyPacket
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
This function is called when the driver supports IEEE802Q tagging.
|
|
It checks the packet to be sent on a VELAN and inserts a tag header
|
|
if necessary.
|
|
|
|
Arguments:
|
|
|
|
PVELAN - pointer to VELAN structure
|
|
Packet - pointer to original packet
|
|
MyPacket - pointer to the new allocated packet
|
|
|
|
Return Value:
|
|
|
|
NDIS_STATUS_SUCCESS if the packet was successfully parsed
|
|
and hence should be passed down to the lower driver. NDIS_STATUS_XXX
|
|
otherwise.
|
|
|
|
--*/
|
|
{
|
|
NDIS_PACKET_8021Q_INFO NdisPacket8021qInfo;
|
|
PVOID pEthTagBuffer;
|
|
PNDIS_BUFFER pNdisBuffer;
|
|
PVOID pVa;
|
|
ULONG BufferLength;
|
|
PNDIS_BUFFER pFirstBuffer;
|
|
PNDIS_BUFFER pSecondBuffer;
|
|
NDIS_STATUS Status;
|
|
NDIS_STATUS Status2;
|
|
PVOID pStartVa = NULL;
|
|
BOOLEAN IsFirstVa;
|
|
PVLAN_TAG_HEADER pTagHeader;
|
|
PUSHORT pTpid;
|
|
ULONG BytesToSkip;
|
|
PUSHORT pTypeLength;
|
|
//
|
|
// Add tag header here
|
|
//
|
|
Status = NDIS_STATUS_SUCCESS;
|
|
|
|
NdisPacket8021qInfo.Value = NDIS_PER_PACKET_INFO_FROM_PACKET(
|
|
MyPacket,
|
|
Ieee8021QInfo);
|
|
|
|
do
|
|
{
|
|
//
|
|
// If the vlan ID of the virtual miniport is 0, the miniport should act like it doesn't
|
|
// support VELAN tag processing
|
|
//
|
|
if (pVElan->VlanId == 0)
|
|
{
|
|
break;
|
|
}
|
|
//
|
|
// Insert a tag only if we have a configured VLAN ID
|
|
//
|
|
|
|
//
|
|
// We don't support E-RIF
|
|
//
|
|
if (NdisPacket8021qInfo.TagHeader.CanonicalFormatId)
|
|
{
|
|
//
|
|
// skip the packet, return NDIS_STATUS_FAILURE
|
|
//
|
|
Status = NDIS_STATUS_INVALID_PACKET;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// The Vlan Id must be the same as the configured VLAN ID if it is non-zero
|
|
//
|
|
if ((NdisPacket8021qInfo.TagHeader.VlanId)
|
|
&& (NdisPacket8021qInfo.TagHeader.VlanId != pVElan->VlanId))
|
|
{
|
|
Status = NDIS_STATUS_INVALID_PACKET;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Find the virtual address after the Ethernet Header
|
|
//
|
|
BytesToSkip = ETH_HEADER_SIZE;
|
|
pNdisBuffer = Packet->Private.Head;
|
|
IsFirstVa = TRUE;
|
|
|
|
//
|
|
// Assume the Ethernet Header is in the first buffer of the packet.
|
|
// The following loop is to find the start address of the data after
|
|
// the ethernet header. This may be either in the first NDIS buffer
|
|
// or in the second.
|
|
//
|
|
while (TRUE)
|
|
{
|
|
#ifdef NDIS51_MINIPORT
|
|
NdisQueryBufferSafe(pNdisBuffer, &pVa, (PUINT)&BufferLength, NormalPagePriority);
|
|
#else
|
|
NdisQueryBuffer(pNdisBuffer, &pVa, &BufferLength);
|
|
#endif
|
|
//
|
|
// The query can fail if the system is low on resources.
|
|
//
|
|
if (pVa == NULL)
|
|
{
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Remember the start of the ethernet header for later.
|
|
//
|
|
if (IsFirstVa)
|
|
{
|
|
pStartVa = pVa;
|
|
IsFirstVa = FALSE;
|
|
}
|
|
|
|
//
|
|
// Have we gone far enough into the packet?
|
|
//
|
|
if (BytesToSkip == 0)
|
|
{
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Does the current buffer contain bytes past the Ethernet
|
|
// header? If so, stop.
|
|
//
|
|
if (BufferLength > BytesToSkip)
|
|
{
|
|
pVa = (PVOID)((PUCHAR)pVa + BytesToSkip);
|
|
BufferLength -= BytesToSkip;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// We haven't gone past the Ethernet header yet, so go
|
|
// to the next buffer.
|
|
//
|
|
BytesToSkip -= BufferLength;
|
|
pNdisBuffer = NDIS_BUFFER_LINKAGE(pNdisBuffer);
|
|
}
|
|
|
|
if (pVa == NULL)
|
|
{
|
|
Status = NDIS_STATUS_RESOURCES;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Allocate space for the Ethernet + VLAN tag header.
|
|
//
|
|
pEthTagBuffer = NdisAllocateFromNPagedLookasideList(&pVElan->TagLookaside);
|
|
|
|
//
|
|
// Memory allocation failed, can't send out the packet
|
|
//
|
|
if (pEthTagBuffer == NULL)
|
|
{
|
|
Status = NDIS_STATUS_RESOURCES;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Allocate NDIS buffers for the Ethernet + VLAN tag header and
|
|
// the data that follows these.
|
|
//
|
|
NdisAllocateBuffer(&Status,
|
|
&pSecondBuffer,
|
|
pVElan->BufferPoolHandle,
|
|
pVa, // byte following the Eth+tag headers
|
|
BufferLength);
|
|
|
|
NdisAllocateBuffer(&Status2,
|
|
&pFirstBuffer,
|
|
pVElan->BufferPoolHandle,
|
|
pEthTagBuffer,
|
|
ETH_HEADER_SIZE + VLAN_TAG_HEADER_SIZE);
|
|
|
|
if (Status != NDIS_STATUS_SUCCESS || Status2 != NDIS_STATUS_SUCCESS)
|
|
{
|
|
//
|
|
// One of the buffer allocations failed.
|
|
//
|
|
if (Status == NDIS_STATUS_SUCCESS)
|
|
{
|
|
NdisFreeBuffer(pSecondBuffer);
|
|
}
|
|
|
|
if (Status2 == NDIS_STATUS_SUCCESS)
|
|
{
|
|
NdisFreeBuffer(pFirstBuffer);
|
|
}
|
|
|
|
NdisFreeToNPagedLookasideList(&pVElan->TagLookaside, pEthTagBuffer);
|
|
|
|
Status = NDIS_STATUS_RESOURCES;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// All allocations were successful, now prepare the packet
|
|
// to be sent down to the lower driver.
|
|
//
|
|
MyPacket->Private.Head = NDIS_BUFFER_LINKAGE(pNdisBuffer);
|
|
NdisChainBufferAtFront(MyPacket, pSecondBuffer)
|
|
NdisChainBufferAtFront(MyPacket, pFirstBuffer)
|
|
|
|
//
|
|
// Prepare the Ethernet and tag headers.
|
|
//
|
|
NdisMoveMemory(pEthTagBuffer, pStartVa, 2 * ETH_LENGTH_OF_ADDRESS);
|
|
pTpid = (PUSHORT)((PUCHAR)pEthTagBuffer + 2 * ETH_LENGTH_OF_ADDRESS);
|
|
*pTpid = TPID;
|
|
pTagHeader = (PVLAN_TAG_HEADER)(pTpid + 1);
|
|
|
|
//
|
|
// Write Ieee 802Q info to packet frame
|
|
//
|
|
INITIALIZE_TAG_HEADER_TO_ZERO(pTagHeader);
|
|
if (NdisPacket8021qInfo.Value)
|
|
{
|
|
SET_USER_PRIORITY_TO_TAG(pTagHeader, NdisPacket8021qInfo.TagHeader.UserPriority);
|
|
}
|
|
else
|
|
{
|
|
SET_USER_PRIORITY_TO_TAG(pTagHeader, 0);
|
|
}
|
|
|
|
SET_CANONICAL_FORMAT_ID_TO_TAG (pTagHeader, 0);
|
|
|
|
if (NdisPacket8021qInfo.TagHeader.VlanId)
|
|
{
|
|
SET_VLAN_ID_TO_TAG (pTagHeader, NdisPacket8021qInfo.TagHeader.VlanId);
|
|
}
|
|
else
|
|
{
|
|
SET_VLAN_ID_TO_TAG (pTagHeader, pVElan->VlanId);
|
|
}
|
|
|
|
pTypeLength = (PUSHORT)((PUCHAR)pTagHeader + sizeof(pTagHeader->TagInfo));
|
|
*pTypeLength = *((PUSHORT)((PUCHAR)pStartVa + 2 * ETH_LENGTH_OF_ADDRESS));
|
|
|
|
//
|
|
// Clear the Ieee8021QInfo field in packet being sent down
|
|
// to prevent double tag insertion!
|
|
//
|
|
NDIS_PER_PACKET_INFO_FROM_PACKET(MyPacket, Ieee8021QInfo) = 0;
|
|
|
|
}
|
|
while (FALSE);
|
|
|
|
return Status;
|
|
}
|
|
|
|
#endif // IEEE_VLAN_SUPPORT
|
|
|