You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
273 lines
18 KiB
273 lines
18 KiB
; THIS FILE IS GENERATED AUTOMATICALLY!
|
|
; THUS, DO NOT MODIFY IT!
|
|
; See Makefile for specifics.
|
|
#define NERR_BASE 2100
|
|
(NERR_BASE+2), "The workstation driver (NETWKSTA.SYS on OS/2 workstations, NETWKSTA.EXE on DOS workstations) isn't installed. "
|
|
(NERR_BASE+3), "The server cannot be located. "
|
|
(NERR_BASE+4), "An internal error occurred. The network cannot access a shared memory segment. "
|
|
(NERR_BASE+5), "A network resource shortage occurred . "
|
|
(NERR_BASE+6), "This operation is not supported on workstations. "
|
|
(NERR_BASE+7), "The device is not connected. "
|
|
(NERR_BASE+14), "The Server service isn't started. "
|
|
(NERR_BASE+15), "The queue is empty. "
|
|
(NERR_BASE+16), "The device or directory does not exist. "
|
|
(NERR_BASE+17), "The operation is invalid on a redirected resource. "
|
|
(NERR_BASE+18), "The name has already been shared. "
|
|
(NERR_BASE+19), "The server is currently out of the requested resource. "
|
|
(NERR_BASE+20), "The server cannot accept more users due to its server level. "
|
|
(NERR_BASE+21), "Requested add of item exceeds maximum allowed. "
|
|
(NERR_BASE+22), "The Peer service supports only two simultaneous users. "
|
|
(NERR_BASE+23), "The API return buffer is too small. "
|
|
(NERR_BASE+27), "A remote API error occurred. "
|
|
(NERR_BASE+31), "An error occurred when opening or reading LANMAN.INI. "
|
|
(NERR_BASE+34), "An internal error occurred when calling the workstation driver. "
|
|
(NERR_BASE+36), "A general network error occurred. "
|
|
(NERR_BASE+38), "The Workstation service has not been started. "
|
|
(NERR_BASE+39), "The requested information is not available. "
|
|
(NERR_BASE+40), "An internal LAN Manager error occurred."
|
|
(NERR_BASE+41), "The server is not configured for transactions. "
|
|
(NERR_BASE+42), "The requested API isn't supported on the remote server. "
|
|
(NERR_BASE+43), "The event name is invalid. "
|
|
(NERR_BASE+46), "Could not find the specified component in LANMAN.INI. "
|
|
(NERR_BASE+47), "Could not find the specified parameter in LANMAN.INI. "
|
|
(NERR_BASE+49), "A line in LANMAN.INI is too long. "
|
|
(NERR_BASE+50), "The printer queue does not exist. "
|
|
(NERR_BASE+51), "The print job does not exist. "
|
|
(NERR_BASE+52), "The printer destination cannot be found. "
|
|
(NERR_BASE+53), "The printer destination already exists. "
|
|
(NERR_BASE+54), "The printer queue already exists. "
|
|
(NERR_BASE+55), "No more printer queues can be added. "
|
|
(NERR_BASE+56), "No more print jobs can be added. "
|
|
(NERR_BASE+57), "No more printer destinations can be added. "
|
|
(NERR_BASE+58), "This printer destination is idle and cannot accept control operations. "
|
|
(NERR_BASE+59), "This printer destination request contains an invalid control function. "
|
|
(NERR_BASE+60), "The printer processor is not responding. "
|
|
(NERR_BASE+61), "The spooler is not running. "
|
|
(NERR_BASE+62), "This operation cannot be performed on the print destination in its current state. "
|
|
(NERR_BASE+63), "This operation cannot be performed on the printer queue in its current state. "
|
|
(NERR_BASE+64), "This operation cannot be performed on the print job in its current state. "
|
|
(NERR_BASE+65), "A spooler memory allocation failure occurred. "
|
|
(NERR_BASE+66), "The device driver does not exist. "
|
|
(NERR_BASE+67), "The datatype is not supported by the processor. "
|
|
(NERR_BASE+68), "The print processor is not installed. "
|
|
(NERR_BASE+80), "The service does not respond to control actions. "
|
|
(NERR_BASE+81), "The service table is full. "
|
|
(NERR_BASE+82), "The requested service has already been started. "
|
|
(NERR_BASE+83), "The service does not respond to control actions. "
|
|
(NERR_BASE+84), "The service has not been started. "
|
|
(NERR_BASE+85), "The service name is invalid. "
|
|
(NERR_BASE+86), "The service is not responding to the control function. "
|
|
(NERR_BASE+87), "The service control is busy. "
|
|
(NERR_BASE+88), "LANMAN.INI contains an invalid service program name. "
|
|
(NERR_BASE+89), "The service cannot be controlled in its present state. "
|
|
(NERR_BASE+90), "The service ended abnormally. "
|
|
(NERR_BASE+91), "The requested pause or stop is not valid for this service. "
|
|
(NERR_BASE+100), "This workstation is already logged on to the local-area network. "
|
|
(NERR_BASE+101), "The workstation isn't logged on to the local-area network. "
|
|
(NERR_BASE+102), "The username or groupname parameter is invalid. "
|
|
(NERR_BASE+103), "The password parameter is invalid. "
|
|
(NERR_BASE+104), "The logon processor did not add the message alias. "
|
|
(NERR_BASE+105), "The logon processor did not add the message alias. "
|
|
(NERR_BASE+106), "The logoff processor did not delete the message alias. "
|
|
(NERR_BASE+107), "The logoff processor did not delete the message alias. "
|
|
(NERR_BASE+109), "Network logons are paused. "
|
|
(NERR_BASE+110), "A centralized logon-server conflict occurred. "
|
|
(NERR_BASE+111), "The server is configured without a valid user path. "
|
|
(NERR_BASE+112), "An error occurred while loading or running the logon script. "
|
|
(NERR_BASE+114), "The logon server was not specified. Your computer will be logged on as STANDALONE. "
|
|
(NERR_BASE+115), "The logon server cannot be found. "
|
|
(NERR_BASE+116), "There is already a logon domain for this computer. "
|
|
(NERR_BASE+117), "The logon server could not validate the logon. "
|
|
(NERR_BASE+119), "The accounts file NET.ACC cannot be found. "
|
|
(NERR_BASE+120), "The groupname cannot be found. "
|
|
(NERR_BASE+121), "The username cannot be found. "
|
|
(NERR_BASE+122), "The resource name cannot be found. "
|
|
(NERR_BASE+123), "The group already exists. "
|
|
(NERR_BASE+124), "The user account already exists. "
|
|
(NERR_BASE+125), "The resource permission list already exists. "
|
|
(NERR_BASE+126), "The UAS database is replicant and will not allow updates. "
|
|
(NERR_BASE+127), "The user account system has not been started. "
|
|
(NERR_BASE+128), "There are too many names in the user account system. "
|
|
(NERR_BASE+129), "A disk I/O to access user account database failed "
|
|
(NERR_BASE+130), "The limit of 64 entries per resource was exceeded. "
|
|
(NERR_BASE+131), "Deleting a user with a session is not allowed. "
|
|
(NERR_BASE+132), "The parent directory cannot be located. "
|
|
(NERR_BASE+133), "Unable to grow UAS session cache segment. "
|
|
(NERR_BASE+134), "This operation is not allowed on this special group. "
|
|
(NERR_BASE+135), "This user is not cached in UAS session cache. "
|
|
(NERR_BASE+136), "The user already belongs to this group. "
|
|
(NERR_BASE+137), "The user does not belong to this group. "
|
|
(NERR_BASE+138), "This user account is undefined. "
|
|
(NERR_BASE+139), "This user account has expired. "
|
|
(NERR_BASE+140), "The user is not allowed to log on from this workstation. "
|
|
(NERR_BASE+141), "The user is not allowed to log on at this time. "
|
|
(NERR_BASE+142), "The password of this user has expired. "
|
|
(NERR_BASE+143), "The password of this user cannot change. "
|
|
(NERR_BASE+144), "This password cannot be used now. "
|
|
(NERR_BASE+145), "The password is shorter than required. "
|
|
(NERR_BASE+146), "The password of this user is too recent to change. "
|
|
(NERR_BASE+147), "The UAS database file is corrupted. "
|
|
(NERR_BASE+148), "No updates are necessary to this replicant UAS database. "
|
|
(NERR_BASE+149), "This replicant database is outdated; synchronization is required. "
|
|
(NERR_BASE+150), "The connection cannot be found. "
|
|
(NERR_BASE+151), "This asg_type is invalid. "
|
|
(NERR_BASE+152), "This device is currently being shared. "
|
|
(NERR_BASE+170), "A computername has not been configured. "
|
|
(NERR_BASE+171), "The Messenger service is already started. "
|
|
(NERR_BASE+172), "The Messenger service failed to start. "
|
|
(NERR_BASE+173), "The message alias cannot be found on the local-area network. "
|
|
(NERR_BASE+174), "This message alias has already been forwarded. "
|
|
(NERR_BASE+175), "This message alias has been added but is still forwarded. "
|
|
(NERR_BASE+176), "This message alias already exists locally. "
|
|
(NERR_BASE+177), "The maximum number of added message aliases has been exceeded. "
|
|
(NERR_BASE+178), "The computername cannot be deleted."
|
|
(NERR_BASE+179), "Messages cannot be forwarded back to the same workstation. "
|
|
(NERR_BASE+180), "Error in domain message processor "
|
|
(NERR_BASE+181), "The message was sent, but the recipient has paused the Messenger service. "
|
|
(NERR_BASE+182), "The message was sent but not received. "
|
|
(NERR_BASE+183), "The message alias is currently in use. Try again later. "
|
|
(NERR_BASE+184), "The Messenger service has not been started. "
|
|
(NERR_BASE+185), "The name is not on the local computer. "
|
|
(NERR_BASE+186), "The forwarded message alias cannot be found on the network. "
|
|
(NERR_BASE+187), "The message alias table on the remote station is full. "
|
|
(NERR_BASE+188), "Messages for this alias are not currently being forwarded. "
|
|
(NERR_BASE+189), "The broadcast message was truncated. "
|
|
(NERR_BASE+194), "This is an invalid devicename. "
|
|
(NERR_BASE+195), "A write fault occurred. "
|
|
(NERR_BASE+197), "A duplicate message alias exists on the local-area network. "
|
|
(NERR_BASE+198), "This message alias will be deleted later. "
|
|
(NERR_BASE+199), "The message alias was not successfully deleted from all networks. "
|
|
(NERR_BASE+200), "This operation is not supported on machines with multiple networks. "
|
|
(NERR_BASE+210), "This shared resource does not exist."
|
|
(NERR_BASE+211), "This device is not shared. "
|
|
(NERR_BASE+212), "A session does not exist with that computername. "
|
|
(NERR_BASE+214), "There isn't an open file with that ID number. "
|
|
(NERR_BASE+215), "A failure occurred when executing a remote administration command. "
|
|
(NERR_BASE+216), "A failure occurred when opening a remote temporary file. "
|
|
(NERR_BASE+217), "The data returned from a remote administration command has been truncated to 64K. "
|
|
(NERR_BASE+218), "This device cannot be shared as both a spooled and a non-spooled resource. "
|
|
(NERR_BASE+219), "The information in the list of servers may be incorrect. "
|
|
(NERR_BASE+220), "The computer isn't active on this domain. "
|
|
(NERR_BASE+231), "The operation is invalid for this device. "
|
|
(NERR_BASE+232), "This device cannot be shared. "
|
|
(NERR_BASE+233), "This device was not open. "
|
|
(NERR_BASE+234), "This devicename list is invalid. "
|
|
(NERR_BASE+235), "The queue priority is invalid. "
|
|
(NERR_BASE+237), "There are no shared communication devices. "
|
|
(NERR_BASE+238), "The queue you specified doesn't exist. "
|
|
(NERR_BASE+240), "This list of devices is invalid. "
|
|
(NERR_BASE+241), "The requested device is invalid. "
|
|
(NERR_BASE+242), "This device is already in use by the spooler. "
|
|
(NERR_BASE+243), "This device is already in use as a communication device. "
|
|
(NERR_BASE+251), "This computername is invalid. "
|
|
(NERR_BASE+254), "The string and prefix specified are too long. "
|
|
(NERR_BASE+256), "This path component is invalid. "
|
|
(NERR_BASE+257), "Cannot determine type of input. "
|
|
(NERR_BASE+262), "The buffer for types is not big enough. "
|
|
(NERR_BASE+270), "Profile files cannot exceed 64K. "
|
|
(NERR_BASE+271), "The start offset is out of range. "
|
|
(NERR_BASE+272), "The system cannot delete current connections to network resources. "
|
|
(NERR_BASE+273), "The system was unable to parse the command line in this file."
|
|
(NERR_BASE+274), "An error occurred while loading the profile file. "
|
|
(NERR_BASE+275), "Errors occurred while saving the profile file. The profile was partially saved. "
|
|
(NERR_BASE+277), "This log file exceeds the maximum defined size. "
|
|
(NERR_BASE+278), "This log file has changed between reads. "
|
|
(NERR_BASE+279), "This log file is corrupt. "
|
|
(NERR_BASE+280), "The source path cannot be a directory. "
|
|
(NERR_BASE+281), "The source path is illegal. "
|
|
(NERR_BASE+282), "The destination path is illegal. "
|
|
(NERR_BASE+283), "The source and destination paths are on different servers. "
|
|
(NERR_BASE+285), "The Run server you requested is paused. "
|
|
(NERR_BASE+289), "An error occurred when communicating with a Run server. "
|
|
(NERR_BASE+291), "An error occurred when starting a background process. "
|
|
(NERR_BASE+292), "The shared resource you are connected to could not be found."
|
|
(NERR_BASE+300), "The LAN adapter number is invalid. "
|
|
(NERR_BASE+301), "There are open files on the connection. "
|
|
(NERR_BASE+302), "Active connections still exist. "
|
|
(NERR_BASE+303), "This netname or password is invalid. "
|
|
(NERR_BASE+304), "The device is being accessed by an active process. "
|
|
(NERR_BASE+305), "The drive letter is in use locally. "
|
|
(NERR_BASE+330), "The specified client is already registered for the specified event. "
|
|
(NERR_BASE+331), "The alert table is full. "
|
|
(NERR_BASE+332), "An invalid or nonexistent alertname was raised. "
|
|
(NERR_BASE+333), "The alert recipient is invalid."
|
|
(NERR_BASE+334), "A user's session with this server has been deleted because his logon hours are no longer valid "
|
|
(NERR_BASE+340), "The log file does not contain the requested record number. "
|
|
(NERR_BASE+350), "The user account system database is not configured correctly. "
|
|
(NERR_BASE+351), "This operation is not permitted when the Netlogon service is running. "
|
|
(NERR_BASE+352), "This operation is not allowed on the last admin account. "
|
|
(NERR_BASE+353), "Unable to find domain controller for this domain. "
|
|
(NERR_BASE+354), "Unable to set logon information for this user. "
|
|
(NERR_BASE+355), "The Netlogon service has not been started. "
|
|
(NERR_BASE+356), "Unable to grow the user account system database. "
|
|
(NERR_BASE+357), "The time on this machine is out sync with time on the primary controller. "
|
|
(NERR_BASE+358), "A password mismatch has been detected. "
|
|
(NERR_BASE+360), "The server ID does not specify a valid server. "
|
|
(NERR_BASE+361), "The session ID does not specify a valid session. "
|
|
(NERR_BASE+362), "The connection ID does not specify a valid connection. "
|
|
(NERR_BASE+363), "There is no space for another entry in the table of available servers. "
|
|
(NERR_BASE+364), "The server has reached the maximum number of sessions it supports. "
|
|
(NERR_BASE+365), "The server has reached the maximum number of connections it supports. "
|
|
(NERR_BASE+366), "The server cannot open more files because it has reached its maximum number. "
|
|
(NERR_BASE+367), "There are no alternate servers registered on this server. "
|
|
(NERR_BASE+380), "The UPS driver could not be accessed by the UPS service. "
|
|
(NERR_BASE+400), "The program below returned an MS-DOS error code:"
|
|
(NERR_BASE+401), "The program below needs more memory:"
|
|
(NERR_BASE+402), "The program below called an unsupported MS-DOS function:"
|
|
(NERR_BASE+403), "The workstation failed to boot."
|
|
(NERR_BASE+404), "The file below is corrupt."
|
|
(NERR_BASE+405), "No loader is specified in the boot-block definition file."
|
|
(NERR_BASE+406), "NetBIOS returned an error: The NCB and SMB are dumped above."
|
|
(NERR_BASE+407), "A disk I/O error occurred."
|
|
(NERR_BASE+408), "Image parameter substitution failed."
|
|
(NERR_BASE+409), "Too many image parameters cross disk sector boundaries."
|
|
(NERR_BASE+410), "The image was not generated from an MS-DOS diskette formatted with /S."
|
|
(NERR_BASE+411), "Remote boot will be restarted later."
|
|
(NERR_BASE+412), "The call to the Remoteboot server failed."
|
|
(NERR_BASE+413), "Cannot connect to the Remoteboot server."
|
|
(NERR_BASE+414), "Cannot open image file on the Remoteboot server."
|
|
(NERR_BASE+415), "Connecting to the Remoteboot server..."
|
|
(NERR_BASE+416), "Connecting to the Remoteboot server..."
|
|
(NERR_BASE+417), "Remote boot service was stopped; check the error log for the cause of the problem."
|
|
(NERR_BASE+418), "Remote boot startup failed; check the error log for the cause of the problem."
|
|
(NERR_BASE+419), "A second connection to a Remoteboot resource is not allowed."
|
|
(NERR_BASE+425), "DISKFT.SYS is not installed. "
|
|
(NERR_BASE+426), "FTMONIT is not running "
|
|
(NERR_BASE+427), "FTADMIN has not locked the disk. "
|
|
(NERR_BASE+428), "Some other process has locked the disk. "
|
|
(NERR_BASE+429), "The verifier/correcter cannot be started. "
|
|
(NERR_BASE+430), "The verifier/correcter can't be aborted because it isn't started. "
|
|
(NERR_BASE+431), "The verifier/correcter can't be aborted. "
|
|
(NERR_BASE+432), "The disk could not be locked/unlocked. "
|
|
(NERR_BASE+433), "The error handle was not recognized. "
|
|
(NERR_BASE+434), "The drive is not mirrored. "
|
|
(NERR_BASE+435), "No change log entries at this time "
|
|
(NERR_BASE+436), "An outstanding request exists, and must be cleared with NetAccountConfirmUpdate "
|
|
(NERR_BASE+437), "The token provided is not recongnised "
|
|
(NERR_BASE+438), "update log file is full "
|
|
(NERR_BASE+439), "A sync is in progress, and the updates must wait. "
|
|
(NERR_BASE+440), "A update is in progress, and the sync must wait. "
|
|
(NERR_BASE+480), "The adapter ID is not supported by rplmgr "
|
|
(NERR_BASE+481), "The adapter ID already exists in RPL.MAP "
|
|
(NERR_BASE+482), "The profile name is already in use "
|
|
(NERR_BASE+483), "The computer name is already in use "
|
|
(NERR_BASE+484), "The profile name doesn't exist in RPL.MAP "
|
|
(NERR_BASE+485), "Cannot modify item; it is being accessed by another process "
|
|
(NERR_BASE+486), "This server is not configured to support RPL "
|
|
(NERR_BASE+487), "The profile or computer name does not meet FAT file system length limitations "
|
|
(NERR_BASE+488), "The profile or computer name does not meet file system or user account length limitations "
|
|
(NERR_BASE+489), "The profile is used by one or more RPL workstations; it cannot be deleted "
|
|
(NERR_BASE+490), "The computer name doesn't exist in RPL.MAP "
|
|
(NERR_BASE+491), "RPL.MAP is corrupt or cannot be opened "
|
|
(NERR_BASE+492), "RPLMGR.INI is corrupt or cannot be opened "
|
|
(NERR_BASE+493), "The computer's hardware does not match the profile "
|
|
(NERR_BASE+494), "The computer is not a rpl workstation "
|
|
(NERR_BASE+495), "The computer name of an existing workstation cannot be changed "
|
|
(NERR_BASE+496), "The name of an existing profile cannot be changed "
|
|
(NERR_BASE+497), "The configuration of an existing profile cannot be changed "
|
|
(NERR_BASE+498), "The predefined profile cannot be deleted "
|
|
(NERR_BASE+499), "The computer cannot be joined to a predefined profile "
|
|
(NERR_BASE+500), "The configuration doesn't exist "
|
|
(NERR_BASE+501), "The user account already exists "
|
|
(NERR_BASE+502), "The computer cannot join a new profile while it is active "
|
|
(NERR_BASE+503), "A rpl domain error has occurred "
|