You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1331 lines
43 KiB
1331 lines
43 KiB
MessageId=10000 SymbolicName=MSG_FIRST
|
|
Language=English
|
|
.
|
|
|
|
MessageId=10001 SymbolicName=MSG_OUT_OF_MEMORY
|
|
Language=English
|
|
Out of Memory.%0
|
|
.
|
|
|
|
MessageId=10002 SymbolicName=MSG_NOT_ADMIN
|
|
Language=English
|
|
You must be an administrator to run this application.%0
|
|
.
|
|
|
|
MessageId=10003 SymbolicName=MSG_ALREADY_RUNNING
|
|
Language=English
|
|
Another copy of this application is already running.%0
|
|
.
|
|
|
|
MessageId=10004 SymbolicName=MSG_CANT_OPEN_HELP_FILE
|
|
Language=English
|
|
Setup could not locate help file %1. Help is not available.%0
|
|
.
|
|
|
|
MessageId=10005 SymbolicName=MSG_SURE_EXIT
|
|
Language=English
|
|
This will exit Setup. You will need to run it again later to install or upgrade to Windows. Are you sure you want to cancel?%0
|
|
.
|
|
|
|
MessageId=10006 SymbolicName=MSG_INVALID_SOURCE
|
|
Language=English
|
|
Setup could not locate Windows files at the specified location (%1).
|
|
|
|
Click OK. Setup will allow you to specify a different location by clicking on Advanced Options.%0
|
|
.
|
|
|
|
MessageId=10007 SymbolicName=MSG_INVALID_SOURCES
|
|
Language=English
|
|
None of the specified source locations are accessible and valid.%0
|
|
.
|
|
|
|
MessageId=10008 SymbolicName=MSG_CANT_LOAD_INF_GENERIC
|
|
Language=English
|
|
Setup was unable to load INF file %1. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10009 SymbolicName=MSG_CANT_LOAD_INF_IO
|
|
Language=English
|
|
Setup was unable to read INF file %1. Try again later. If this error occurs again, contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10010 SymbolicName=MSG_CANT_LOAD_INF_SYNTAXERR
|
|
Language=English
|
|
INF file %1 contains a syntax error. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10011 SymbolicName=MSG_ERROR_WITH_SYSTEM_ERROR
|
|
Language=English
|
|
%1
|
|
|
|
%2%0
|
|
.
|
|
|
|
MessageId=10012 SymbolicName=MSG_CANT_BUILD_SOURCE_LIST
|
|
Language=English
|
|
Setup was unable to build the list of files to be copied.%0
|
|
.
|
|
|
|
MessageId=10013 SymbolicName=MSG_NO_VALID_LOCAL_SOURCE
|
|
Language=English
|
|
Setup was unable to locate a locally attached hard drive suitable for holding temporary Setup files. A drive with approximately %1!u! MB to %2!u! MB of free space is required (actual requirements vary depending on drive size and formatting). You may avoid this requirement by installing/upgrading from a Compact Disk (CD).%0
|
|
.
|
|
|
|
MessageId=10014 SymbolicName=MSG_CANT_START_COPYING
|
|
Language=English
|
|
Setup was unable to start copying files.%0
|
|
.
|
|
|
|
MessageId=10015 SymbolicName=MSG_UNKNOWN_SYSTEM_ERROR
|
|
Language=English
|
|
An unknown system error (code 0x%1!x!) has occurred.%0
|
|
.
|
|
|
|
MessageId=10016 SymbolicName=MSG_DOSNET_INF_DESC
|
|
Language=English
|
|
Windows file list (%1)%0
|
|
.
|
|
|
|
MessageId=10017 SymbolicName=MSG_REBOOT_FAILED
|
|
Language=English
|
|
Setup was unable to restart your computer. Please close all applications and shut down your computer to continue installing Windows.%0
|
|
.
|
|
|
|
MessageId=10018 SymbolicName=MSG_DIR_CREATE_FAILED
|
|
Language=English
|
|
Setup was unable to create a critical folder (%1).%0
|
|
.
|
|
|
|
MessageId=10019 SymbolicName=MSG_BOOT_FILE_ERROR
|
|
Language=English
|
|
Setup was unable to create, locate, or modify a critical file (%1) needed to start Windows.%0
|
|
.
|
|
|
|
MessageId=10020 SymbolicName=MSG_UNATTEND_FILE_INVALID
|
|
Language=English
|
|
The specified Setup script file (%1) is inaccessible or invalid. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10021 SymbolicName=MSG_UDF_FILE_INVALID
|
|
Language=English
|
|
Setup was unable to access the the specified Uniqueness Database File (%1). Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10022 SymbolicName=MSG_COPY_ERROR_TEMPLATE
|
|
Language=English
|
|
An error occurred copying file %1 to %2.
|
|
|
|
%3
|
|
|
|
%4%0
|
|
.
|
|
|
|
MessageId=10023 SymbolicName=MSG_COPY_ERROR_NOSRC
|
|
Language=English
|
|
The file is missing. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10024 SymbolicName=MSG_COPY_ERROR_DISKFULL
|
|
Language=English
|
|
Your disk is full. Another application may be using a large amount of disk space while Setup is running.%0
|
|
.
|
|
|
|
MessageId=10025 SymbolicName=MSG_COPY_ERROR_OPTIONS
|
|
Language=English
|
|
You may choose to retry the copy, skip this file, or exit Setup.
|
|
|
|
* If you select Retry, Setup will try to copy the file again.
|
|
|
|
* If you select Skip File, the file will not be copied. This option is intended for advanced users who are familiar with the various Windows system files.
|
|
|
|
* If you select Exit Setup, you will need to run Setup again later to install Windows.%0
|
|
.
|
|
|
|
MessageId=10026 SymbolicName=MSG_REALLY_SKIP
|
|
Language=English
|
|
This option is intended for advanced users who understand the ramifications of missing system files.
|
|
|
|
If you skip this file, you may encounter problems later during the installation process.
|
|
|
|
Are you sure you want to skip this file?%0
|
|
.
|
|
|
|
MessageId=10027 SymbolicName=MSG_SYSTEM_ON_HPFS
|
|
Language=English
|
|
Windows is installed on a drive formatted with the OS/2 File System (HPFS). Windows does not support this file system.
|
|
|
|
You must convert this drive to the Windows NT File System (NTFS) before upgrading.%0
|
|
.
|
|
|
|
MessageId=10028 SymbolicName=MSG_HPFS_DRIVES_EXIST
|
|
Language=English
|
|
The OS/2 File System (HPFS) is in use on your computer. Windows does not support this file system.
|
|
|
|
If you will need to access the data stored on these drives from Windows, you must convert them to the Windows NT File System (NTFS) before continuing.
|
|
|
|
Would you like to continue installing Windows?%0
|
|
.
|
|
|
|
MessageId=10029 SymbolicName=MSG_CANT_SAVE_FT_INFO
|
|
Language=English
|
|
Setup was unable to retrieve or save information about your disk drives.%0
|
|
.
|
|
|
|
MessageId=10030 SymbolicName=MSG_USER_LOCAL_SOURCE_TOO_SMALL
|
|
Language=English
|
|
The drive you specified (%1!c!:) is too small to hold the required temporary Setup files. A drive with approximately %2!u! MB of free space is required. You may avoid this requirement by installing/upgrading from a Compact Disk.%0
|
|
.
|
|
|
|
MessageId=10031 SymbolicName=MSG_CANT_UPGRADE_SERVER_TO_WORKSTATION
|
|
Language=English
|
|
Setup is unable to upgrade this Windows Server product to Windows XP Professional.%0
|
|
.
|
|
|
|
MessageId=10032 SymbolicName=MSG_NOTIFY_EVALUATION_INSTALLATION
|
|
Language=English
|
|
This BETA version of the product is intended for evaluation purposes only.%0
|
|
.
|
|
|
|
MessageId=10033 SymbolicName=MSG_CANT_LOAD_SETUPAPI
|
|
Language=English
|
|
Setup was unable to locate or load %1, or the file is corrupt. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10034 SymbolicName=MSG_SYSTEM_PARTITION_TOO_SMALL
|
|
Language=English
|
|
There is not enough space on your system partition (Drive %1!c!:). Approximately %2!u! MB of free space is required (actual requirements vary depending on drive size and formatting).%0
|
|
.
|
|
|
|
MessageId=10035 SymbolicName=MSG_INCORRECT_PLATFORM
|
|
Language=English
|
|
Setup error: The winnt32.exe was unable to run because the machine type is not correct.
|
|
Please use path\filename to setup Windows for your machine type.%0
|
|
.
|
|
|
|
MessageId=10036 SymbolicName=MSG_CANT_MIGRATE_UNSUP_DRIVERS
|
|
Language=English
|
|
Your computer has a mass storage device that is not supported on Windows. Setup was unable to migrate the driver for this device.
|
|
|
|
You might need to provide the Manufacturer-supplied support disk for this device during the next phase of setup.%0
|
|
.
|
|
|
|
MessageId=10037 SymbolicName=MSG_DSCHECK_REQD_FILE_MISSING
|
|
Language=English
|
|
The required file %1 is not found on the source %2 during DS version check. Setup cannot continue.%0
|
|
.
|
|
|
|
MessageId=10038 SymbolicName=MSG_DSCHECK_COPY_ERROR
|
|
Language=English
|
|
During the DS version check, Windows could not copy file %1 from source %2. Make sure you have at least 50 MB of free disk space and write permission to the Windows and System folders, and then try the version check again.%0
|
|
.
|
|
|
|
MessageId=10039 SymbolicName=MSG_DSCHECK_SCHEMA_UPGRADE_NEEDED
|
|
Language=English
|
|
The schema version on the DC is %1. The schema version in the Windows software to which you are upgrading is %2. You must update the schema before Setup can upgrade the DC.
|
|
|
|
To update the schema, run Schupgr.exe. All necessary files (including Schupgr.exe) are in your system folder. Run Schupgr.exe only once on one DC in the enterprise. Changes will be copied to all other DCs. When the update is complete, restart Setup.%0
|
|
.
|
|
|
|
MessageId=10040 SymbolicName=MSG_DSCHECK_SCHEMA_UPGRADE_COPY_ERROR
|
|
Language=English
|
|
The schema version on the DC is %1. The schema version in the Windows software to which you are upgrading is %2. You must update the schema before Setup can upgrade the DC. Setup cannot continue.
|
|
|
|
An error occurred during the copying of necessary schema upgrade files to your system folder.%0
|
|
.
|
|
|
|
MessageId=10041 SymbolicName=MSG_DSCHECK_SCHEMA_CLEAN_INSTALL_NEEDED
|
|
Language=English
|
|
The schema version on the DC is %1. The schema version in the Windows software to which you are upgrading is %2. You cannot upgrade a DC that has a schema version earlier than 10 to a schema version later than or equal to 10. To upgrade to the new schema version, you must first perform a fresh install on all DCs in your enterprise.%0
|
|
.
|
|
|
|
MessageId=10042 SymbolicName=MSG_INSTALL_DRIVE_TOO_SMALL
|
|
Language=English
|
|
There is not enough free disk space on the drive that contains your current Windows installation for Setup to continue. Approximately %1!u! MB of free disk space is required on this drive for an upgrade.%0
|
|
.
|
|
|
|
MessageId=10043 SymbolicName=MSG_INSTALL_DRIVE_INVALID
|
|
Language=English
|
|
The drive that contains your current Windows installation is not suitable for holding a new installation of Windows.
|
|
.
|
|
|
|
MessageId=10044 SymbolicName=MSG_USER_LOCAL_SOURCE_INVALID
|
|
Language=English
|
|
The drive you specified (%1!c!:) is not suitable for holding temporary Setup files.%0
|
|
.
|
|
|
|
MessageId=10045 SymbolicName=MSG_WRN_TRUNC_WINDIR
|
|
Language=English
|
|
The directory name is invalid. Directory names must contain 8 or less valid characters.
|
|
.
|
|
|
|
MessageId=10046 SymbolicName=MSG_EULA_FAILED
|
|
Language=English
|
|
|
|
Setup was unable to locate or load the End User License Agreement, the file is corrupt, or you specified an invalid installation source path. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10047 SymbolicName=MSG_CD_PID_IS_INVALID
|
|
Language=English
|
|
|
|
The CD Key which you entered is invalid. Please try again.
|
|
.
|
|
|
|
MessageId=10048 SymbolicName=MSG_UNATTEND_CD_PID_IS_INVALID
|
|
Language=English
|
|
|
|
The Setup script file does not contain a valid CD key. Contact your system administrator for a valid CD key.
|
|
.
|
|
|
|
MessageId=10049 SymbolicName=MSG_OEM_PID_IS_INVALID
|
|
Language=English
|
|
|
|
The Product ID which you entered is invalid. Please try again.
|
|
.
|
|
|
|
MessageId=10050 SymbolicName=MSG_UNATTEND_OEM_PID_IS_INVALID
|
|
Language=English
|
|
|
|
The Setup script file does not contain a valid Product ID. Contact your system administrator for a valid Product ID.
|
|
.
|
|
|
|
MessageId=10051 SymbolicName=MSG_SMS_SUCCEED
|
|
Language=English
|
|
Initial setup stage completed successfully. Rebooting system.%0
|
|
.
|
|
|
|
MessageId=10052 SymbolicName=MSG_SMS_FAIL
|
|
Language=English
|
|
Unable to complete Windows setup because of the following error: %1%0
|
|
.
|
|
|
|
MessageId=10053 SymbolicName=MSG_CANT_UPGRADE_FROM_BUILD_NUMBER
|
|
Language=English
|
|
This version of Windows cannot be upgraded. The option to upgrade will not be available.%0
|
|
.
|
|
|
|
MessageId=10054 SymbolicName=MSG_DSCHECK_SCHEMA_OLD_BUILD
|
|
Language=English
|
|
The schema version on the DC is %1. The schema version in the Windows software to which you are upgrading is %2. You can only upgrade a DC to a schema version later than or equal to the current schema version on the DC (%1). Setup cannot continue.%0
|
|
.
|
|
|
|
MessageId=10055 SymbolicName=MSG_INVALID_PARAMETER
|
|
Language=English
|
|
Setup was invoked with an invalid command line parameter (%1).%0
|
|
.
|
|
|
|
MessageId=10056 SymbolicName=MSG_INCOMPATIBILITIES
|
|
Language=English
|
|
One or more services on your system are incompatible with Windows.%0
|
|
.
|
|
|
|
MessageId=10057 SymbolicName=MSG_TS_CLIENT_FAIL
|
|
Language=English
|
|
Windows can not be run inside of a Terminal Services Client environment.%0
|
|
.
|
|
|
|
MessageId=10058 SymbolicName=MSG_CLUSTER_WARNING
|
|
Language=English
|
|
Running Windows setup on a cluster node without using the winnt32.exe /tempdrive:<drive_letter> option may result in placement of temporary setup files on a clustered disk. Setup will fail after reboot. For more information on the /tempdrive option, see the unattended setup information in the Getting Started book.
|
|
|
|
If you would like to exit Setup and restart with this command-line option, please press the CANCEL button below. Otherwise, Setup will continue and attempt to select a drive to hold your temporary files.
|
|
.
|
|
|
|
|
|
MessageId=10059 SymbolicName=MSG_INVALID_SOURCEPATH
|
|
Language=English
|
|
|
|
The installation source path specified to Setup is invalid. Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=10060 SymbolicName=MSG_NO_UNATTENDED_UPGRADE
|
|
Language=English
|
|
This version of Windows cannot be upgraded. Setup cannot continue.%0
|
|
.
|
|
|
|
MessageId=10061 SymbolicName=MSG_NO_UPGRADE_ALLOWED
|
|
Language=English
|
|
Windows Setup does not support upgrading from %1 to %2.%0
|
|
.
|
|
|
|
MessageId=10062 SymbolicName=MSG_TYPE_WIN31
|
|
Language=English
|
|
Microsoft Windows 3.1%0
|
|
.
|
|
|
|
MessageId=10063 SymbolicName=MSG_TYPE_WIN95
|
|
Language=English
|
|
Microsoft Windows 95%0
|
|
.
|
|
|
|
MessageId=10064 SymbolicName=MSG_TYPE_WIN98
|
|
Language=English
|
|
Microsoft Windows 98%0
|
|
.
|
|
|
|
MessageId=10065 SymbolicName=MSG_TYPE_NTW
|
|
Language=English
|
|
Microsoft Windows NT Workstation%0
|
|
.
|
|
|
|
MessageId=10066 SymbolicName=MSG_TYPE_NTS
|
|
Language=English
|
|
Microsoft Windows NT Server%0
|
|
.
|
|
|
|
MessageId=10067 SymbolicName=MSG_TYPE_NTSE
|
|
Language=English
|
|
Microsoft Windows NT Server, Enterprise Edition%0
|
|
.
|
|
|
|
MessageId=10068 SymbolicName=MSG_TYPE_NTPRO
|
|
Language=English
|
|
Microsoft Windows 2000 Professional%0
|
|
.
|
|
|
|
MessageId=10069 SymbolicName=MSG_TYPE_NTS2
|
|
Language=English
|
|
Microsoft Windows 2000 Server%0
|
|
.
|
|
|
|
MessageId=10070 SymbolicName=MSG_TYPE_NTAS
|
|
Language=English
|
|
Microsoft Windows 2000 Advanced Server%0
|
|
.
|
|
|
|
MessageId=10071 SymbolicName=MSG_TYPE_NTSDTC
|
|
Language=English
|
|
Microsoft Windows 2000 Datacenter Server%0
|
|
.
|
|
|
|
MessageId=10072 SymbolicName=MSG_TYPE_NTPROPRE
|
|
Language=English
|
|
Microsoft Windows 2000 Professional Prerelease%0
|
|
.
|
|
|
|
MessageId=10073 SymbolicName=MSG_TYPE_NTSPRE
|
|
Language=English
|
|
Microsoft Windows 2000 Server Prerelease%0
|
|
.
|
|
|
|
MessageId=10074 SymbolicName=MSG_TYPE_NTASPRE
|
|
Language=English
|
|
Microsoft Windows 2000 Advanced Server Prerelease%0
|
|
.
|
|
|
|
MessageId=10075 SymbolicName=MSG_NO_UNATTENDED_UPGRADE_SPECIFIC
|
|
Language=English
|
|
Windows Setup does not support upgrading from %1 to %2.
|
|
Setup cannot continue.%0
|
|
.
|
|
|
|
MessageId=10076 SymbolicName=MSG_NO_UPGRADE_ALLOWED_GENERIC
|
|
Language=English
|
|
Windows Setup cannot upgrade the currently installed operating system. However, you can install a separate copy of Windows. To do this, click OK.%0
|
|
.
|
|
|
|
MessageId=10077 SymbolicName=MSG_TYPE_NTSTSE
|
|
Language=English
|
|
Microsoft Windows NT, Terminal Server Edition%0
|
|
.
|
|
|
|
MessageId=10078 SymbolicName=MSG_TYPE_NTSCITRIX
|
|
Language=English
|
|
Citrix WinFrame-based product%0
|
|
.
|
|
|
|
MessageId=10079 SymbolicName=MSG_CCP_MEDIA_FPP_PID
|
|
Language=English
|
|
The pid is invalid for this version of Windows, provide the pid that came with the Windows Upgrade CD.
|
|
.
|
|
|
|
MessageId=10080 SymbolicName=MSG_FPP_MEDIA_CCP_PID
|
|
Language=English
|
|
The pid is invalid for this version of Windows, provide the pid that came with the Windows CD.
|
|
.
|
|
;#if 0
|
|
;MessageId=10081 SymbolicName=MSG_TYPE_NTPRO51PRE
|
|
;Language=English
|
|
;Microsoft Windows Whistler Professional%0
|
|
;.
|
|
;
|
|
;MessageId=10082 SymbolicName=MSG_TYPE_NTS51PRE
|
|
;Language=English
|
|
;Microsoft Windows Whistler Server%0
|
|
;.
|
|
;
|
|
;MessageId=10083 SymbolicName=MSG_TYPE_NTAS51PRE
|
|
;Language=English
|
|
;Microsoft Windows Whistler Advanced Server%0
|
|
;.
|
|
;
|
|
;MessageId=10084 SymbolicName=MSG_TYPE_NTSDTC51PRE
|
|
;Language=English
|
|
;Microsoft Windows Whistler Datacenter Server%0
|
|
;.
|
|
;
|
|
;MessageId=10085 SymbolicName=MSG_TYPE_NTPER51PRE
|
|
;Language=English
|
|
;Microsoft Windows Whistler Personal%0
|
|
;.
|
|
;#endif
|
|
|
|
MessageId=10086 SymbolicName=MSG_DSCHECK_SCHEMA_WHISTLER_BETA1_DETECTED
|
|
Language=English
|
|
Setup has detected that Whistler beta 1 domain controllers were previously installed in this forest. Whister beta 2 domain controllers cannot coexist in the same forest as Whistler beta 1 domain controllers.
|
|
|
|
Demote all Whistler beta 1 domain controllers in this forest before upgrading to Whistler beta 2. An attempt to run both beta versions in a forest may cause loss of data.
|
|
.
|
|
|
|
MessageId=10087 SymbolicName=MSG_UPGRADE_INSPECTION_MISSING_BOOT_INI
|
|
Language=English
|
|
Setup was unable to access your existing boot configuration file, %1
|
|
|
|
You may not start an NT upgrade without an existing boot configuration file. You must restart the computer into the Recovery Console and follow the recovery steps to recreate your boot environment files before performing the upgrade.
|
|
.
|
|
|
|
MessageId=10088 SymbolicName=MSG_UPGRADE_BOOT_INI_MUNGE_MISSING_BOOT_INI
|
|
Language=English
|
|
Setup was unable to access your existing boot configuration file, %1
|
|
|
|
This file is required during an upgrade, and future restarts of this computer will fail. Please restart this computer into the Recovery Console, and choose the option to repair/recover your boot and configuration files.
|
|
.
|
|
|
|
MessageId=10089 SymbolicName=MSG_DSCHECK_CANT_CREATE_DIRECTORY
|
|
Language=English
|
|
During the DS version check, Windows could not create directory %1. Make sure you have write permission to the Windows and System folders, and then try the version check again.
|
|
.
|
|
|
|
|
|
;#if defined(REMOTE_BOOT)
|
|
;MessageId=xxxxx SymbolicName=MSG_REQUIRES_UPGRADE
|
|
;Language=English
|
|
;Remote boot clients must be upgraded; installation of a new operating system version is disabled. Upgrade is not possible, therefore this program must exit.%0
|
|
;.
|
|
;
|
|
;MessageId=xxxxx SymbolicName=MSG_CANT_UPGRADE_REMOTEBOOT_TO_SERVER
|
|
;Language=English
|
|
;Windows Whistler remote boot clients cannot be upgraded to Windows Whistler Server.%0
|
|
;.
|
|
;#endif // defined(REMOTE_BOOT)
|
|
|
|
MessageId=20000 SymbolicName=MSG_X86_FIRST
|
|
Language=English
|
|
.
|
|
|
|
MessageId=20001 SymbolicName=MSG_REQUIRES_586
|
|
Language=English
|
|
Windows requires a Pentium or later processor.%0
|
|
.
|
|
|
|
MessageId=20002 SymbolicName=MSG_CANT_GET_C_COLON
|
|
Language=English
|
|
Setup was unable to locate the drive from which your computer starts.%0
|
|
.
|
|
|
|
MessageId=20003 SymbolicName=MSG_DASD_ACCESS_FAILURE
|
|
Language=English
|
|
Setup was unable to read from or write to drive %1!c!. If a virus scanner is running, disable it then restart Setup.%0
|
|
.
|
|
|
|
MessageId=20004 SymbolicName=MSG_UNSUPPORTED_SECTOR_SIZE
|
|
Language=English
|
|
Drive %1!c! uses an unsupported data block size. Setup cannot configure your computer to start Windows from the drive.%0
|
|
.
|
|
|
|
MessageId=20005 SymbolicName=MSG_UNKNOWN_FS
|
|
Language=English
|
|
Setup could not determine the file system in use on drive %1!c!, or the file system is not recognized by Setup. Your computer cannot be configured to start Windows from the drive.%0
|
|
.
|
|
|
|
MessageId=20006 SymbolicName=MSG_NTLDR_NOT_COPIED
|
|
Language=English
|
|
The critical system file %1!c!:\NTLDR was not successfully copied. Setup cannot continue.%0
|
|
.
|
|
|
|
MessageId=20007 SymbolicName=MSG_SYSPART_IS_HPFS
|
|
Language=English
|
|
The hard drive from which your computer starts (%1!c!:) is formatted with the OS/2 File System (HPFS). Windows does not support this file system.
|
|
|
|
You must convert this drive to the Windows NT File System (NTFS) before upgrading.%0
|
|
.
|
|
|
|
MessageId=20008 SymbolicName=MSG_SYSTEM_ON_CVF
|
|
Language=English
|
|
Windows is installed on a DriveSpace, DoubleSpace, or other compressed drive. Windows does not support compressed drives.
|
|
|
|
You must uncompress the drive before upgrading.%0
|
|
.
|
|
|
|
MessageId=20009 SymbolicName=MSG_CVFS_EXIST
|
|
Language=English
|
|
DriveSpace, DoubleSpace, or other compressed drives exist on your computer. Windows does not support compressed drives. You will not be able to access data stored on these drives from Windows.
|
|
|
|
Would you like to continue installing Windows?%0
|
|
.
|
|
|
|
MessageId=20010 SymbolicName=MSG_GENERIC_FLOPPY_PROMPT
|
|
Language=English
|
|
Please insert a formatted, blank high-density floppy disk into drive A:. This disk will become "%1."
|
|
|
|
Click OK when the disk is in the drive, or click Cancel to exit Setup.%0
|
|
.
|
|
|
|
MessageId=20011 SymbolicName=MSG_FIRST_FLOPPY_PROMPT
|
|
Language=English
|
|
You must now provide %2!u! formatted, blank high-density floppy disks.
|
|
|
|
Please insert one of these disks into drive A:. This disk will become "%1."
|
|
|
|
Click OK when the disk is in the drive, or click Cancel to exit Setup.%0
|
|
.
|
|
|
|
MessageId=20012 SymbolicName=MSG_FLOPPY_BAD_FORMAT
|
|
Language=English
|
|
If you inserted a floppy disk, it is too small or it is not formatted with a recognized file system. Setup is unable to use this disk.
|
|
|
|
Click OK. Setup will prompt you for a different floppy disk.%0
|
|
.
|
|
|
|
MessageId=20013 SymbolicName=MSG_FLOPPY_CANT_GET_SPACE
|
|
Language=English
|
|
Setup is unable to determine the amount of free space on the floppy disk you have provided. Setup is unable to use this disk.
|
|
|
|
Click OK. Setup will prompt you for a different floppy disk.%0
|
|
.
|
|
|
|
MessageId=20014 SymbolicName=MSG_FLOPPY_NOT_BLANK
|
|
Language=English
|
|
The floppy disk you have provided is not blank. Setup is unable to use this disk.
|
|
|
|
Click OK. Setup will prompt you for a different floppy disk.%0
|
|
.
|
|
|
|
MessageId=20015 SymbolicName=MSG_CANT_WRITE_FLOPPY
|
|
Language=English
|
|
Setup was unable to write to the floppy disk in drive A:. The floppy disk may be damaged or write-protected. Remove write protection or try a different floppy disk.
|
|
|
|
Click OK. Setup will prompt you for a different floppy disk.%0
|
|
.
|
|
|
|
MessageId=20016 SymbolicName=MSG_FLOPPY_BUSY
|
|
Language=English
|
|
Setup is unable to access the floppy disk in drive A:. The drive may be in use by another application.
|
|
|
|
Click OK. Setup will prompt you for a different floppy disk.%0
|
|
.
|
|
|
|
MessageId=20017 SymbolicName=MSG_CANT_MOVE_FILE_TO_FLOPPY
|
|
Language=English
|
|
Setup was unable to move file %2 to drive %1!c!:.%0
|
|
.
|
|
|
|
MessageId=20018 SymbolicName=MSG_EVIL_FLOPPY_DRIVE
|
|
Language=English
|
|
Setup has determined that floppy drive A: is non-existent or is not a high-density 3.5" drive. An A: drive with a capacity of 1.44 Megabytes or higher is required for Setup operation with floppies.%0
|
|
.
|
|
|
|
MessageId=20019 SymbolicName=MSG_UPGRADE_DLL_CORRUPT
|
|
Language=English
|
|
The file %1 needed by Setup in order to upgrade the current environment to Windows is corrupt. Contact your system administrator.
|
|
|
|
Setup will continue but the option to upgrade will not be available.%0
|
|
.
|
|
|
|
MessageId=20020 SymbolicName=MSG_UPGRADE_DLL_ERROR
|
|
Language=English
|
|
The option to upgrade will not be available at this time because Setup was unable to load the file %1.%0
|
|
.
|
|
|
|
MessageId=20021 SymbolicName=MSG_UPGRADE_INIT_ERROR
|
|
Language=English
|
|
The option to upgrade will not be available at this time.%0
|
|
.
|
|
|
|
MessageId=20023 SymbolicName=MSG_MEMPHIS_NOT_YET_SUPPORTED
|
|
Language=English
|
|
.
|
|
|
|
MessageId=20024 SymbolicName=MSG_BOOT_TEXT_TOO_LONG
|
|
Language=English
|
|
Internal Setup error: the translated boot code messages are too long.%0
|
|
.
|
|
|
|
MessageId=20025 SymbolicName=MSG_UPGRADE_LANG_ERROR
|
|
Language=English
|
|
The language of this installation of Windows differs from the one you are installing. The option to upgrade will not be available.%0
|
|
.
|
|
|
|
MessageId=20026 SymbolicName=MSG_NO_CROSS_PLATFORM
|
|
Language=English
|
|
32 bit Setup cannot run on this platform. Setup is unable to continue.%0
|
|
.
|
|
|
|
MessageId=30000 SymbolicName=MSG_RISC_FIRST
|
|
Language=English
|
|
.
|
|
|
|
MessageId=30001 SymbolicName=MSG_SYSTEM_PARTITION_INVALID
|
|
Language=English
|
|
No valid system partitions were found. Setup is unable to continue.%0
|
|
.
|
|
|
|
MessageId=30002 SymbolicName=MSG_COULDNT_READ_NVRAM
|
|
Language=English
|
|
An unexpected error occured reading your computer's startup environment. Contact your computer manufacturer.%0
|
|
.
|
|
|
|
MessageId=30003 SymbolicName=MSG_COULDNT_WRITE_NVRAM
|
|
Language=English
|
|
Setup was unable to modify your computer's startup settings. The startup environment may be full.%0
|
|
.
|
|
|
|
MessageId=30004 SymbolicName=MSG_NOT_FOUND
|
|
Language=English
|
|
The system could not locate message #%1!x!.
|
|
.
|
|
|
|
MessageId=30006 SymbolicName=MSG_INF_SINGLELINE
|
|
Language=English
|
|
%1
|
|
.
|
|
|
|
MessageId=30007 SymbolicName=MSG_INF_BAD_REGSPEC_1
|
|
Language=English
|
|
; Warning: the following line represents a registry change that could be
|
|
; expressed in an INF file. The root key has been changed to HKR.
|
|
.
|
|
|
|
MessageId=30008 SymbolicName=MSG_INF_BAD_REGSPEC_2
|
|
Language=English
|
|
; Warning: the following line represents a registry change that could be
|
|
; expressed in an INF file. The data type has been changed to REG_BINARY.
|
|
.
|
|
|
|
MessageId=30009 SymbolicName=MSG_SUCCESSFUL_UPGRADE_CHECK
|
|
Language=English
|
|
Windows upgrade check successfully completed.
|
|
.
|
|
|
|
MessageId=30011 SymbolicName=MSG_NOT_ENOUGH_MEMORY
|
|
Language=English
|
|
Setup detected %1!u!MB of RAM, but %2!u!MB is required.
|
|
.
|
|
|
|
MessageId=30012 SymbolicName=MSG_INTLINF_NOT_FOUND
|
|
Language=English
|
|
Setup was unable to locate or load the international settings INF, or the file is corrupt. Make sure the location of Windows files is set correctly under Advanced Options.
|
|
.
|
|
|
|
MessageId=30013 SymbolicName=MSG_CMDCONS_RISC
|
|
Language=English
|
|
The Recovery Console can only be run from CD on this platform. For details, refer to your product documentation.
|
|
.
|
|
|
|
MessageId=30014 SymbolicName=MSG_DCPROMO_DISKSPACE
|
|
Language=English
|
|
Setup has detected that you may not have enough disk space on your installation partition to use Active Directory after the upgrade is complete. To complete the upgrade and then store the Active Directory data in a separate location or on a new disk, click OK. To exit Setup and free an additional %1!u! MB from your installation partition now, click Cancel.
|
|
.
|
|
|
|
MessageId=30015 SymbolicName=MSG_CMDCONS_WIN9X
|
|
Language=English
|
|
You can only install the Recovery Console from Windows XP.
|
|
.
|
|
|
|
|
|
MessageId=40000 SymbolicName=MSG_LOG_START
|
|
Language=English
|
|
.
|
|
|
|
MessageId=40001 SymbolicName=MSG_LOG_ADDED_DIR_TO_COPY_LIST
|
|
Language=English
|
|
Added directory to copy list:
|
|
|
|
SourceName = %1
|
|
TargetName = %2
|
|
InfSymbol = %3
|
|
|
|
.
|
|
|
|
MessageId=40002 SymbolicName=MSG_LOG_ADDED_FILE_TO_COPY_LIST
|
|
Language=English
|
|
Added file to copy list:
|
|
|
|
SourceName = %1
|
|
Directory = %2
|
|
Size = %3
|
|
TargetName = %4
|
|
Flags = %5
|
|
|
|
.
|
|
|
|
MessageId=40003 SymbolicName=MSG_LOG_CHECKING_DRIVES
|
|
Language=English
|
|
Examining drives:
|
|
.
|
|
|
|
MessageId=40004 SymbolicName=MSG_LOG_DRIVE_NOT_HARD
|
|
Language=English
|
|
Drive %1!c!: doesn't exist or is not a local hard drive
|
|
.
|
|
|
|
MessageId=40005 SymbolicName=MSG_LOG_DRIVE_NO_VOL_INFO
|
|
Language=English
|
|
Drive %1!c!: unsupported file system
|
|
.
|
|
|
|
MessageId=40006 SymbolicName=MSG_LOG_DRIVE_NTFT
|
|
Language=English
|
|
Drive %1!c!: part of FT set
|
|
.
|
|
|
|
MessageId=40007 SymbolicName=MSG_LOG_DRIVE_NO_ARC
|
|
Language=English
|
|
Drive %1!c!: not visible from firmware
|
|
.
|
|
|
|
MessageId=40008 SymbolicName=MSG_LOG_DRIVE_CANT_GET_SPACE
|
|
Language=English
|
|
Drive %1!c!: unable to determine free space (error = %2!u!)
|
|
.
|
|
|
|
MessageId=40009 SymbolicName=MSG_LOG_DRIVE_NOT_ENOUGH_SPACE
|
|
Language=English
|
|
Drive %1!c!: not enough space (%2!u! bpc, %3!u! clus, %4!u! free)
|
|
.
|
|
|
|
MessageId=40010 SymbolicName=MSG_LOG_DRIVE_OK
|
|
Language=English
|
|
Drive %1!c!: acceptable
|
|
.
|
|
|
|
MessageId=40011 SymbolicName=MSG_LOG_COPY_OK
|
|
Language=English
|
|
Source %3!u!: copy %1 to %2 [OK]
|
|
.
|
|
|
|
MessageId=40012 SymbolicName=MSG_LOG_COPY_ERR
|
|
Language=English
|
|
Source %3!u!: copy %1 to %2 [error %4!u!]
|
|
.
|
|
|
|
MessageId=40013 SymbolicName=MSG_LOG_SKIPPED_FILE
|
|
Language=English
|
|
File %1 autoskipped
|
|
.
|
|
|
|
MessageId=40014 SymbolicName=MSG_LOG_CHECKING_USER_DRIVE
|
|
Language=English
|
|
Examining drive %1!c!: specified on command line:
|
|
.
|
|
|
|
MessageId=40015 SymbolicName=MSG_LOG_DRIVE_VERITAS
|
|
Language=English
|
|
Drive %1!c!: Soft partition on a dynamic volume
|
|
.
|
|
|
|
MessageId=40016 SymbolicName=MSG_LOG_DECOMP_ERR
|
|
Language=English
|
|
Source %3!u!: decompress %1 to %2 [error %4!u!]
|
|
.
|
|
|
|
MessageId=40017 SymbolicName=MSG_LOG_SYSTEM_PARTITION_TOO_SMALL
|
|
Language=English
|
|
Drive %1!c!: not enough space for boot files (%2!u! free, %3!u! required)
|
|
.
|
|
|
|
MessageId=40018 SymbolicName=MSG_LOG_SYSTEM_PARTITION_INVALID
|
|
Language=English
|
|
Drive %1!c!: is not a valid system partition.
|
|
.
|
|
|
|
MessageId=40019 SymbolicName=MSG_LOG_SYSTEM_PARTITION_VALID
|
|
Language=English
|
|
Drive %1!c!: acceptable for boot files
|
|
.
|
|
|
|
MessageId=40020 SymbolicName=MSG_LOG_LOCAL_SOURCE_TOO_SMALL
|
|
Language=English
|
|
Drive %1!c!: not enough space for temporary installation files (%2!u! MB free, %3!u! MB required)
|
|
.
|
|
|
|
MessageId=40021 SymbolicName=MSG_LOG_LOCAL_SOURCE_INVALID
|
|
Language=English
|
|
Drive %1!c!: not valid for holding temporary installation files.
|
|
.
|
|
|
|
MessageId=40022 SymbolicName=MSG_LOG_LOCAL_SOURCE_VALID
|
|
Language=English
|
|
Drive %1!c!: acceptable for local source.
|
|
.
|
|
|
|
MessageId=40023 SymbolicName=MSG_LOG_INSTALL_DRIVE_TOO_SMALL
|
|
Language=English
|
|
Drive %1!c!: not enough space to upgrade final installation directory (%2!u! free, %3!u! required)
|
|
.
|
|
|
|
MessageId=40024 SymbolicName=MSG_LOG_INSTALL_DRIVE_INVALID
|
|
Language=English
|
|
Drive %1!c!: is not a valid for holding final installation directory.
|
|
.
|
|
|
|
MessageId=40025 SymbolicName=MSG_LOG_INSTALL_DRIVE_OK
|
|
Language=English
|
|
Drive %1!c!: acceptable for final installation directory.
|
|
.
|
|
|
|
MessageId=40027 SymbolicName=MSG_LOG_BEGIN
|
|
Language=English
|
|
The WINNT32 portion of Setup has started.
|
|
|
|
.
|
|
|
|
MessageId=40028 SymbolicName=MSG_LOG_END
|
|
Language=English
|
|
|
|
The WINNT32 portion of Setup has completed.
|
|
|
|
.
|
|
|
|
MessageId=40029 SymbolicName=MSG_SKU_UNKNOWNSOURCE
|
|
Language=English
|
|
Windows Setup could not load the Setup configuration files. Your Windows Setup files may be damaged or unreadable.
|
|
|
|
Setup cannot continue.
|
|
.
|
|
|
|
MessageId=40030 SymbolicName=MSG_SKU_VERSION
|
|
Language=English
|
|
The version of Windows you have is not supported for upgrade.
|
|
.
|
|
|
|
MessageId=40031 SymbolicName=MSG_SKU_VARIATION
|
|
Language=English
|
|
Your copy of Windows does not support upgrading from an evaluation copy of Windows.
|
|
.
|
|
|
|
MessageId=40032 SymbolicName=MSG_SKU_SUITE
|
|
Language=English
|
|
Your copy of Windows does not support the required product suite.
|
|
.
|
|
|
|
;#if 0
|
|
;MessageId=40033 SymbolicName=MSG_SKU_TYPE_NTW
|
|
;Language=English
|
|
;Your copy of Windows XP only supports upgrades from Windows 95, Windows 98, and Windows NT Workstation.
|
|
;.
|
|
;
|
|
;MessageId=40034 SymbolicName=MSG_SKU_TYPE_NTS
|
|
;Language=English
|
|
;Your copy of Windows XP only supports upgrading from Windows NT Server versions 3.51 and 4.0.
|
|
;.
|
|
;
|
|
;MessageId=40035 SymbolicName=MSG_SKU_TYPE_NTSE
|
|
;Language=English
|
|
;Your copy of Windows XP only allows upgrades from Windows NT Server, Enterprise Edition version 4.0.
|
|
;.
|
|
;#endif
|
|
|
|
MessageId=40036 SymbolicName=MSG_SKU_FULL
|
|
Language=English
|
|
Setup cannot upgrade your current installation to Windows.
|
|
%1
|
|
You can install a new copy of Windows, but you will have to reinstall your applications and settings.
|
|
.
|
|
|
|
MessageId=40037 SymbolicName=MSG_SKU_UPGRADE
|
|
Language=English
|
|
Setup cannot upgrade your current installation to Windows.
|
|
%1
|
|
Setup cannot continue.
|
|
.
|
|
|
|
MessageId=40038 SymbolicName=MSG_NO_UPGRADE_OR_CLEAN
|
|
Language=English
|
|
Setup cannot continue because upgrade functionality is disabled and your copy of Windows only allows upgrades.
|
|
.
|
|
|
|
MessageId=40040 SymbolicName=MSG_SKU_UNKNOWNTARGET
|
|
Language=English
|
|
Windows Setup could not detect the version of Windows you are currently running. Setup cannot continue.
|
|
.
|
|
|
|
MessageId=40041 SymbolicName=MSG_NEC98_NEED_UNINSTALL_DMITOOL
|
|
Language=English
|
|
Windows setup found DMITOOL Ver2.0. This application blocks Windows setup.
|
|
Please uninstall DMITOOL and run setup again.
|
|
.
|
|
|
|
MessageId=40042 SymbolicName=MSG_NEC98_NEED_REMOVE_ATA
|
|
Language=English
|
|
Windows setup found an ATA Disk. This device blocks Windows setup.
|
|
Please remove the ATA Disk and run setup again.
|
|
.
|
|
|
|
MessageId=50000 SymbolicName=MSG_CMDCONS_ASK
|
|
Language=English
|
|
You can install the Windows Recovery Console as a startup option. The Recovery Console helps you gain access to your Windows installation to replace damaged files and disable or enable services.
|
|
|
|
If you cannot start the Recovery Console from your computer's hard disk, you can run the Recovery Console from the Windows Setup CD.
|
|
|
|
The Recovery Console requires approximately 7MB of hard disk space.
|
|
|
|
Do you want to install the Recovery Console?
|
|
.
|
|
|
|
MessageId=50001 SymbolicName=MSG_CMDCONS_DONE
|
|
Language=English
|
|
The Windows Recovery Console has been successfully installed.
|
|
|
|
To use the Windows Recovery Console, restart your computer and then select Windows Recovery Console from the Startup Menu.
|
|
|
|
For a list of commands you can use with the Recovery Console, type HELP at the Recovery Console command prompt.
|
|
.
|
|
|
|
MessageId=50002 SymbolicName=MSG_CMDCONS_DID_NOT_FINISH
|
|
Language=English
|
|
The installation did not complete correctly.
|
|
|
|
It is possible that Windows startup files in the root directory were missing or in use during the installation. Please close any applications that might be using those files.
|
|
.
|
|
|
|
|
|
MessageId=50003 SymbolicName=MSG_NO_PLATFORM
|
|
Language=English
|
|
Dosnet does not have a Destination Platform.
|
|
.
|
|
|
|
|
|
MessageId=50004 SymbolicName=MSG_WINNT32_CANCELLED
|
|
Language=English
|
|
Winnt32 Has been cancelled.
|
|
.
|
|
|
|
|
|
MessageId=50005 SymbolicName=MSG_INVALID_HEADLESS_SETTING
|
|
Language=English
|
|
The specified COM port selection is invalid.
|
|
.
|
|
|
|
|
|
MessageId=50100 SymbolicName=MSG_UDF_INVALID_USAGE
|
|
Language=English
|
|
To use the %1 file with Windows Setup, start Windows Setup from a network share or from a CD-ROM, and use the /makelocalsource option.
|
|
%0
|
|
.
|
|
|
|
MessageId=50200 SymbolicName=MSG_UPGRADE_OTHER_OS_FOUND
|
|
Language=English
|
|
You cannot upgrade your Windows installation to Windows XP because you have more than one operating system installed on your computer. Upgrading one operating system can cause problems with files shared by the other operating system, and is therefore not permitted.
|
|
%0
|
|
.
|
|
|
|
MessageId=50300 SymbolicName=MSG_UPGRADE_W95UPG_OLDER_REGISTERED
|
|
Language=English
|
|
Setup found a registered dll on your machine which is older than the one on CD, and therefore will be ignored.
|
|
%0
|
|
.
|
|
|
|
MessageId=50400 SymbolicName=MSG_REGISTRY_ACCESS_ERROR
|
|
Language=English
|
|
Setup cannot continue because some necessary information cannot be accessed in the registry.%0
|
|
.
|
|
|
|
MessageId=50500 SymbolicName=MSG_LOG_SYSTEM_PARTITION_TOO_SMALL2
|
|
Language=English
|
|
Drive %1 not enough space for boot files (%2!u! free, %3!u! required)
|
|
.
|
|
|
|
MessageId=50501 SymbolicName=MSG_LOG_SYSTEM_PARTITION_VALID2
|
|
Language=English
|
|
Drive %1 acceptable for boot files
|
|
.
|
|
|
|
MessageId=50502 SymbolicName=MSG_LOG_SYSTEM_PARTITION_INVALID2
|
|
Language=English
|
|
Drive %1 is not a valid system partition.
|
|
.
|
|
|
|
MessageId=50503 SymbolicName=MSG_LOG_DRIVE_NOT_HARD2
|
|
Language=English
|
|
Drive %1 doesn't exist or is not a local hard drive
|
|
.
|
|
|
|
MessageId=50504 SymbolicName=MSG_SYSTEM_PARTITION_TOO_SMALL2
|
|
Language=English
|
|
There is not enough space on your system partition (Volume %1). Approximately %2!u! MB of free space is required (actual requirements vary depending on drive size and formatting).%0
|
|
.
|
|
|
|
MessageId=50505 SymbolicName=LOG_DYNUPDT_DISABLED
|
|
Language=English
|
|
The Dynamic Update feature is disabled.
|
|
%0
|
|
.
|
|
|
|
MessageId=50509 SymbolicName=MSG_PLATFORM_NOT_SUPPORTED
|
|
Language=English
|
|
Windows XP does not support this platform. Setup is unable to continue.
|
|
%0
|
|
.
|
|
|
|
MessageId=50510 SymbolicName=MSG_SURE_CANCEL_DOWNLOAD_DRIVERS
|
|
Language=English
|
|
Setup is downloading important product updates and up to %1!u! driver(s) required for your hardware devices. If you cancel, these devices might not work after the upgrade is completed. Are you sure you want to cancel the download?%0
|
|
.
|
|
|
|
MessageId=50511 SymbolicName=MSG_NO_UPDATE_SHARE
|
|
Language=English
|
|
Setup cannot update the installation sources because no update share was specified.%0
|
|
.
|
|
|
|
MessageId=50512 SymbolicName=MSG_PREPARE_SHARE_FAILED
|
|
Language=English
|
|
Setup encountered an error while updating the installation sources. For more information examine setup log files.%0
|
|
.
|
|
|
|
MessageId=50513 SymbolicName=MSG_INVALID_INF_FILE
|
|
Language=English
|
|
Setup information file %1 is invalid.
|
|
|
|
Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=50514 SymbolicName=MSG_RESTART
|
|
Language=English
|
|
Restart%0
|
|
.
|
|
|
|
MessageId=50515 SymbolicName=MSG_ERROR_PROCESSING_DRIVER
|
|
Language=English
|
|
Unable to process information files in package %1. Replace or remove it before restarting Setup.%0
|
|
.
|
|
|
|
MessageId=50516 SymbolicName=MSG_ERROR_WRITING_FILE
|
|
Language=English
|
|
Setup encountered an error (%1!u!) writing to file %2. Make sure the path is accessible and you have write permissions.%0
|
|
.
|
|
|
|
MessageId=50517 SymbolicName=MSG_ERROR_PROCESSING_UPDATES
|
|
Language=English
|
|
Setup encountered an error (%1!u!) while processing %2. For more information examine setup log files.%0
|
|
.
|
|
|
|
MessageId=50518 SymbolicName=MSG_LOG_USE_UPDATED
|
|
Language=English
|
|
Source %3!u!: Using replacement file %1 for %2.
|
|
.
|
|
|
|
MessageId=50519 SymbolicName=MSG_MUST_PREPARE_SHARE
|
|
Language=English
|
|
The specified share %1 must be prepared before use.
|
|
|
|
Contact your system administrator.%0
|
|
.
|
|
|
|
MessageId=50520 SymbolicName=MSG_SKU_SERVICEPACK
|
|
Language=English
|
|
Windows Setup cannot continue without service pack 5 or greater installed.
|
|
Please install the latest Windows NT 4.0 service pack.%0
|
|
.
|
|
|
|
MessageId=50521 SymbolicName=MSG_SYSTEM_PARTITIONTYPE_INVALID
|
|
Language=English
|
|
The disk containing the system partition is not partitioned in the GPT format, which is required to install Windows. You must repartition this disk in the GPT format. You can do this by installing Windows from CD media. Setup cannot continue.
|
|
.
|
|
|
|
MessageId=50522 SymbolicName=MSG_LOG_DISKSPACE_CHECK
|
|
Language=English
|
|
DiskSpace Check:
|
|
|
|
DriveLetter = %1!c!
|
|
ClusterSize = %2!u!
|
|
FreeSpace = %3!u!MB
|
|
|
|
SpaceLocalSource = %4!u!MB (includes %5!u!MB padding)
|
|
SpaceBootFiles = %6!u!MB
|
|
SpaceWinDirSpace = %7!u!MB
|
|
TotalSpaceRequired = %8!u!MB
|
|
|
|
.
|
|
|
|
MessageId=50524 SymbolicName=MSG_TYPE_WINME
|
|
Language=English
|
|
Microsoft Windows Millennium%0
|
|
.
|
|
|
|
MessageId=50525 SymbolicName=MSG_NO_DETAILS
|
|
Language=English
|
|
There are no details available for this incompatibility.
|
|
.
|
|
|
|
MessageId=50600 SymbolicName=MSG_SXS_ERROR_DIRECTORY_IS_MISSING_MANIFEST
|
|
Language=English
|
|
The manifest file "%2" is missing from the directory %1.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_DIRECTORY_IS_MISSING_CATALOG
|
|
Language=English
|
|
The catalog file "%2" is missing from the directory %1.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_FILE_IS_ALL_ZEROES
|
|
Language=English
|
|
The file %1 is corrupt; it contains all zeroes.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_FILE_INSTEAD_OF_DIRECTORY
|
|
Language=English
|
|
%1 is expected to be a directory, but it is a file.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_NON_LEAF_DIRECTORY_CONTAINS_FILE
|
|
Language=English
|
|
%1 should only contain directories, but it contains the file %2.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_REQUIRED_DIRECTORY_MISSING
|
|
Language=English
|
|
The required directory %1 is missing.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_FILE_OPEN_FAILED
|
|
Language=English
|
|
Setup was unable to open the file %1.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_FILE_READ_FAILED
|
|
Language=English
|
|
Setup was unable to read the file %1.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_DIRECTORY_EMPTY
|
|
Language=English
|
|
The directory %1 is empty.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SXS_ERROR_OBSOLETE_DIRECTORY_PRESENT
|
|
Language=English
|
|
The directory %1 is from an older version of Windows and should not be present.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SURE_CANCEL_DOWNLOAD
|
|
Language=English
|
|
Setup is downloading important product updates. Are you sure you want to cancel the download?%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_WARNING_ACCESSIBILITY
|
|
Language=English
|
|
If you want to choose the install drive letter and partition, there will be parts of setup during which the accessibility features will not be available. Do you wish to continue?
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_TYPE_NTPRO51
|
|
Language=English
|
|
Microsoft Windows XP Professional%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_TYPE_NTS51
|
|
Language=English
|
|
Microsoft Windows Server 2003, Standard Edition%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_TYPE_NTAS51
|
|
Language=English
|
|
Microsoft Windows Server 2003, Enterprise Edition%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_TYPE_NTSDTC51
|
|
Language=English
|
|
Microsoft Windows Server 2003, Datacenter Edition%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_TYPE_NTPER51
|
|
Language=English
|
|
Microsoft Windows XP Home Edition%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_TYPE_NTBLA51
|
|
Language=English
|
|
Microsoft Windows Server 2003, Web Edition%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_RESTART_TO_RUN_AGAIN
|
|
Language=English
|
|
Before Setup continues, please restart your computer.%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SKU_TYPE
|
|
Language=English
|
|
Your current installation of Windows is not a supported upgrade path.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_RUNNING_UNDER_COMPATIBILITY
|
|
Language=English
|
|
Setup cannot run in program compatibility mode. To run Setup normally, go to My Computer, double-click the CD icon, and then double-click the Setup.exe file.
|
|
.
|
|
MessageId= SymbolicName=MSG_TYPE_NTSPOW
|
|
Language=English
|
|
Microsoft Windows Powered%0
|
|
.
|
|
MessageId= SymbolicName=MSG_TYPE_NTSBS4X
|
|
Language=English
|
|
Microsoft BackOffice Small Business Server%0
|
|
.
|
|
MessageId= SymbolicName=MSG_TYPE_NTSBS50
|
|
Language=English
|
|
Microsoft Small Business Server 2000%0
|
|
.
|
|
MessageId= SymbolicName=MSG_TYPE_NTSBS51
|
|
Language=English
|
|
Microsoft Windows Server 2003 for Small Business Server%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_INVALID_TIME_FRAME
|
|
Language=English
|
|
An encrypted product key can only be valid for any time frame from 5 to 60 days. Please enter a value between 5 and 60 and run winnt32 /encrypt again.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_INVALID_PID
|
|
Language=English
|
|
The product key entered does not appear to be valid for the Windows version you are building an unattended installation file for. Please check for a valid product key and run winnt32 /encrypt again.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_WRITE_FAILURE_UNATTEND
|
|
Language=English
|
|
Setup could not write to the unattended setup file you specified. Please ensure that the file is present in the specified location, and that it can be written to, and run winnt32 /encrypt again.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_ENCRYPT_SUCCESS
|
|
Language=English
|
|
The product key was successfully encrypted into the specified unattended installation file.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_ENCRYPT_FAILURE
|
|
Language=English
|
|
Setup failed to encrypt the product key into the specified unattended installation file.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_ENCRYPT_NOUNATTEND
|
|
Language=English
|
|
You did not specify an unattend file to add the encrypted product key to. Please specify one using the /unattend switch and run winnt32 /encrypt again.
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_WARNING_DTCUPGRADE
|
|
Language=English
|
|
You are attempting to upgrade the original manufacturer-installed operating system with a retail version.
|
|
Doing so may cause computer problems and instability, and will void any support contract you may have with the computer manufacturer.
|
|
It is strongly recommended that you click Cancel, close Setup, and then contact your computer manufacturer for an upgrade.
|
|
%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_PRIVILEGE_NOT_HELD
|
|
Language=English
|
|
You don't have a required privilege. You must have the following privileges to run this application:
|
|
%1
|
|
%2
|
|
%3
|
|
%4%0
|
|
.
|
|
|
|
MessageId= SymbolicName=MSG_SYSTEM_HAS_THIRD_PARTY_KERNEL
|
|
Language=English
|
|
Setup cannot upgrade due to third-party kernel.%0
|
|
.
|